High Brightness SMD LED
Low Power Requirement & Energy Efficient
Easily customized for length with several options
Features :
Series Datasheet For Indoor Use - PLCC Lightbar with Heatsink
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Tube Light Source
Auditorium Walkway Lighting
Stairway Accent Lighting
Cabinet Lighting
Typical Applications :
Specifications :
CRI≥80
Color :
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
2
General Information ........................................................................................................................................................... 4
Introduction .............................................................................................................................................................. 4
Product Nomenclature ......................................................................................................................................... 4
Mechanical Dimensions .................................................................................................................................................... 5
LBMx-F16 series dimensions ............................................................................................................................... 5
LBM-F24 series dimensions ................................................................................................................................. 5
LBMx-F32 series dimensions ............................................................................................................................... 6
LBMx-F48 series dimensions ............................................................................................................................... 6
LBMx-F64 series dimensions ............................................................................................................................... 7
LBMRTB-N14/N0647 dimensions ...................................................................................................................... 7
LBMRTB-N21/N0648 dimensions ...................................................................................................................... 8
LBMRTB-N28/N0649 dimensions ...................................................................................................................... 8
LBMRTB-N42/N0650 dimensions ...................................................................................................................... 9
LBMRTB-N56/N0651 dimensions ...................................................................................................................... 9
Absolute Maximum Ratings ..........................................................................................................................................10
Electro-Optical Characteristics (Ta=25°C) .................................................................................................................10
LBMx-F16 Series ....................................................................................................................................................10
LBMx-F24 Series ....................................................................................................................................................11
LBMx-F32 Series ....................................................................................................................................................11
LBMx-F48 Series ....................................................................................................................................................12
LBMx-F64 Series ....................................................................................................................................................12
LBMRTB-Nxx/N06xx Series ................................................................................................................................13
Assembly Instructions .....................................................................................................................................................14
Installation Guide ..............................................................................................................................................................15
Recommended Methods ...................................................................................................................................16
Cable Preparation ..............................................................................................................................................................18
Accessory .............................................................................................................................................................................19
Wire ............................................................................................................................................................................19
Connector ................................................................................................................................................................19
Driver .........................................................................................................................................................................20
Dimmer .....................................................................................................................................................................20
Table of Contents
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
3
Environmental Compliance ...........................................................................................................................................20
Application Notes..............................................................................................................................................................21
Revision History .................................................................................................................................................................22
About Edison Opto ...........................................................................................................................................................22
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
4
General Information
With the newly introduced PLCC Lightbar from Edison Opto, users can now fashion their own choices of lighting without the excess limitation of a lighting fixture. The PLCC Lightbar features multi-chips packaged 5050 PLCC SMDs on an extruded heat-sink 20mm (0.8”) wide and length up to 120cm (47.2”). The plastic caps at both ends of the heat-sink combine with the slim linear are designed specifically to allow easy screw-tight installation at compact spaces where traditional light source cannot fit in.
Introduction
Product Nomenclature
L B M W - A 0 3 / A 0 0 0 0X1 X2 X3 X4 X5 X6 X7 X8
X1LED Item
X2Package Type
X3Emitting Color
X4Circuit Type
X5LED Quantity
Code Type Code Type Code Type Code Type Code Type
LB Lightbar M Waterproof W Cool White C FR4 - 3 in Series 16 16 pcs
H Neutral White F Al Heatsink - 2 in Series 21 21 pcs
X Warm White J FPC - 3 in Series 24 24 pcs
R Red M FPC - 6 in Series 28 28 pcs
A Amber(615nm) N Al Heatsink - 7 in Series 48 48 pcs
Y Yellow(590nm) 64 64 pcs
G True Green 192 192 pcs
B Blue 300 300 pcs
RTB RGB 3chips 480 480 pcs
X6~X7Serial No.
X8Dimension for sign
Code Type Code Type
-- -- 00 55.4*77.7*1.6mm
Table 1. Product nomenclature
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
5
Mechanical Dimensions
Figure 3. LBMx-F16 series circuit diagram.
LBMx-F16 series dimensions
LBM-F24 series dimensions
Figure 1. LBMx-F16 series dimensions.
Circuit Diagram
LBMx-F16 series LBMx-F24 series
K(-)
A(+)
IC IC IC IC IC IC IC IC
1 2 3 4 5 6 7 8
18.8
310
320±1.0
6.2
150±5
13 20.6
JST 02T-JWPF-VSLE-SJST 02R-JWPF-VSLE-S
150±5
Figure 4. LBMx-F24 series circuit diagram.
Note : All dimensions are in millimeters.
Figure 2. LBM-F24 series dimensions.
K(-)
A(+)
IC IC IC IC IC IC IC
1 2 3 4 10 11 12
18.8
460
470±1.0
150±5
JST 02T-JWPF-VSLE-S
6.2
13 20.6
JST 02R-JWPF-VSLE-S
150±5
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
6
Figure 7. LBMx-F32 series circuit diagram.
LBMx-F32 series dimensions
LBMx-F48 series dimensions
Figure 5. LBMx-F32 series dimensions.
Circuit Diagram
K(-)
A(+)
IC IC IC IC IC IC IC
1 2 3 4 14 15 16
18.8
610
620±1.0
150±5
JST 02T-JWPF-VSLE-S
6.2
13 20.6
JST 02R-JWPF-VSLE-S
150±5
Figure 8. LBMx-F48 series circuit diagram.
Note : All dimensions are in millimeters.
Figure 6. LBMx-F48 series dimensions.
LBMx-F48 series LBMx-F32 series
K(-)
A(+)
IC IC IC IC IC IC IC
1 2 3 4 22 23 24
18.8
910
920±1.0
20.6
150±5
JST 02T-JWPF-VSLE-S
6.2
13 20.6
JST 02R-JWPF-VSLE-S
150±5
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
7
Figure 11. LBMx-F64 series circuit diagram.
LBMx-F64 series dimensions
Figure 9. LBMx-F64 series dimensions.
Circuit Diagram
K(-)
A(+)
IC IC IC IC IC IC IC
1 2 3 4 30 31 32
Figure 12. LBMRTB-N14/N0647 circuit diagram.
Note : All dimensions are in millimeters.
LBMRTB-N14/N0647 dimensions
Figure 10. LBMRTB-N14/N0647 dimensions.
LBMRTB-N14/N0647 series LBMx-F64 series
A(+)
R1 R2B(-)G(-)R(-)
DC 24V
6.20
±0.5
013
.00
20.6
0±0.
50
150.00±5.00150.00±5.00
21.43310.00
320.00±0.50
JST 04T-JWPF-VSLE-S JST 04R-JWPF-VSLE-S
18.8
1210
1220±1.0
150±5
JST 02T-JWPF-VSLE-S
6.2
13 20.6
JST 02R-JWPF-VSLE-S
150±5
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
8
Figure 15. LBMRTB-N21/N0648 circuit diagram.
LBMRTB-N21/N0648 dimensions
Figure 13. LBMRTB-N21/N0648 dimensions.
Circuit Diagram
6.20
±0.5
013
.00
20.6
0±0.
50
150.00±5.00150.00±5.00
21.43460.00
470.00±0.50
JST 04T-JWPF-VSLE-S JST 04R-JWPF-VSLE-S
R1 R2 R3B(-)G(-)R(-)
A(+)DC 24V
Figure 16. LBMRTB-N28/N0649 circuit diagram.
Note : All dimensions are in millimeters.
LBMRTB-N28/N0649 dimensions
Figure 14. LBMRTB-N28/N0649 dimensions.
LBMRTB-N28/N0649 SeriesLBMRTB-N21/N0648 Series
6.20
±0.5
013
.00
20.6
0±0.
50
150.00±5.00150.00±5.00
21.43610.00
620.00±0.50
JST 04T-JWPF-VSLE-S JST 04R-JWPF-VSLE-S
R1 R2 R4
B(-)G(-)R(-)
A(+)DC 24V
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
9
Figure 19. LBMRTB-N42/N0650 circuit diagram.
LBMRTB-N42/N0650 dimensions
LBMRTB-N56/N0651 dimensions
Figure 17. LBMRTB-N42/N0650 dimensions.
Circuit Diagram
6.20
±0.5
013
.00
20.6
0±0.
50
150.00±5.00150.00±5.00
21.43910.00
920.00±0.50
JST 04T-JWPF-VSLE-S JST 04R-JWPF-VSLE-S
R1 R2 R6
B(-)G(-)R(-)
A(+)DC 24V
Figure 20. LBMRTB-N56/N0651 circuit diagram.
Note : All dimensions are in millimeters.
Figure 18. LBMRTB-N56/N0651 dimensions.
LBMRTB-N56/N0651 SeriesLBMRTB-N42/N0650 Series
6.20
±0.5
013
.00
20.6
0±0.
50
150.00±5.00150.00±5.00
21.431210.00
1220.00±0.50
JST 04T-JWPF-VSLE-S JST 04R-JWPF-VSLE-S
R1 R2 R8
B(-)
G(-)
R(-)
A(+)DC 24V
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
10
Absolute Maximum Ratings
Notes:1. Proper current derating must be observed to maintain junction temperature below the maximum at all time.2. LEDs are not designed to be driven in reverse bias.
Table 2. Absolute maximum ratings for PLCC lightbar with heatsink series.
Parameter Symbol Rating Units
LED Junction Temperature TJ 125 °C
Operating Temperature Topr -30 ~ +85 °C
Storage Temperature Tstg -40 ~ +85 °C
Electro-Optical Characteristics (Ta=25°C)
LBMx-F16 Series
Part No. ColorNumber
ofLEDs
InputVoltage(V DC)
Power(W)
Current(mA)
RadianceAngle
λd(nm)/CCT(K)
LumenFlux(lm)
LBMR-F16/N0247 Red 16 15 2.40 160 120° 620~630nm 65
LBMY-F16/N0247 Yellow 16 15 2.40 160 120° 585~595nm 65
LBMA-F16/N0247 Amber 16 15 2.40 160 120° 610~620nm 65
LBMG-F16/N0247 True Green 16 24 3.84 160 120° 520~535nm 135
LBMB-F16/N0247 Blue 16 24 3.84 160 120° 465~475nm 40
LBMW-F16/A0247 Cool White 16 24 3.84 160 120° 6000K 225
LBMH-F16/D0247 Neutral White 16 24 3.84 160 120° 4100K 195
LBMX-F16/D0247 Warm White 16 24 3.84 160 120° 3050K 70
Table 3. LBMx-F16 series electric-optical characteristics.
Note : Flux is measured with an accuracy of ± 10%.
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
11
LBMx-F24 Series
Part No. ColorNumber
ofLEDs
InputVoltage(V DC)
Power(W)
Current(mA)
RadianceAngle
λd(nm)/CCT(K)
LumenFlux(lm)
LBMR-F24/N0248 Red 24 15 3.60 240 120° 620~630nm 95
LBMY-F24/N0248 Yellow 24 15 3.60 240 120° 585~595nm 95
LBMA-F24/N0248 Amber 24 15 3.60 240 120° 610~620nm 95
LBMG-F24/N0248 True Green 24 24 5.76 240 120° 520~535nm 205
LBMB-F24/N0248 Blue 24 24 5.76 240 120° 465~475nm 60
LBMW-F24/A0248 Cool White 24 24 5.76 240 120° 6000K 335
LBMH-F24/D0248 Neutral White 24 24 5.76 240 120° 4100K 295
LBMX-F24/D0248 Warm White 24 24 5.76 240 120° 3050K 250
Table 4. LBMx-F24 series electric-optical characteristics.
Note : Flux is measured with an accuracy of ± 10%.
LBMx-F32 Series
Part No. ColorNumber
ofLEDs
InputVoltage(V DC)
Power(W)
Current(mA)
RadianceAngle
λd(nm)/CCT(K)
LumenFlux(lm)
LBMR-F32/N0249 Red 32 15 4.80 320 120° 620~630nm 125
LBMY-F32/N0249 Yellow 32 15 4.80 320 120° 585~595nm 125
LBMA-F32/N0249 Amber 32 15 4.80 320 120° 610~620nm 125
LBMG-F32/N0249 True Green 32 24 7.68 320 120° 520~535nm 270
LBMB-F32/N0249 Blue 32 24 7.68 320 120° 465~475nm 80
LBMW-F32/A0249 Cool White 32 24 7.68 320 120° 6000K 450
LBMH-F32/D0249 Neutral White 32 24 7.68 320 120° 4100K 395
LBMX-F32/D0249 Warm White 32 24 7.68 320 120° 3050K 335
Table 5. LBMx-F32 series electric-optical characteristics.
Note: Flux is measured with an accuracy of ± 10%.
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
12
LBMx-F48 Series
Part No. ColorNumber
ofLEDs
InputVoltage(V DC)
Power(W)
Current(mA)
RadianceAngle
λd(nm)/CCT(K)
LumenFlux(lm)
LBMR-F48/N0250 Red 48 15 7.20 480 120° 620~630nm 190
LBMY-F48/N0250 Yellow 48 15 7.20 480 120° 585~595nm 190
LBMA-F48/N0250 Amber 48 15 7.20 480 120° 610~620nm 190
LBMG-F48/N0250 True Green 48 24 11.52 480 120° 520~535nm 405
LBMB-F48/N0250 Blue 48 24 11.52 480 120° 465~475nm 115
LBMW-F48/A0250 Cool White 48 24 11.52 480 120° 6000K 670
LBMH-F48/D0250 Neutral White 48 24 11.52 480 120° 4100K 590
LBMX-F48/D0250 Warm White 48 24 11.52 480 120° 3050K 505
Table 6. LBMx-F48 series electric-optical characteristics.
Note : Flux is measured with an accuracy of ± 10%.
LBMx-F64 Series
Part No. ColorNumber
ofLEDs
InputVoltage(V DC)
Power(W)
Current(mA)
RadianceAngle
λd(nm)/CCT(K)
LumenFlux(lm)
LBMR-F64/N0251 Red 64 15 9.60 640 120° 620~630nm 250
LBMY-F64/N0251 Yellow 64 15 9.60 640 120° 585~595nm 250
LBMA-F64/N0251 Amber 64 15 9.60 640 120° 610~620nm 250
LBMG-F64/N0251 True Green 64 24 15.36 640 120° 520~535nm 535
LBMB-F64/N0251 Blue 64 24 15.36 640 120° 465~475nm 155
LBMW-F64/A0251 Cool White 64 24 15.36 640 120° 6000K 895
LBMH-F64/D0251 Neutral White 64 24 15.36 640 120° 4100K 785
LBMX-F64/D0251 Warm White 64 24 15.36 640 120° 3050K 675
Table 7. LBMx-F64 series electric-optical characteristics.
Note : Flux is measured with an accuracy of ± 10%.
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
13
LBMRTB-Nxx/N06xx Series
Part No. ColorNumber
ofLEDs
InputVoltage(V DC)
Power(W)
Current(mA)
RadianceAngle
λd(nm)/CCT(K)
LumenFlux(lm)
LBMRTB-N14/N0647
Red
14 24 0.96 40 120°
620~630nm 18
True Green 520~535nm 40
Blue 465~475nm 9
LBMRTB-N21/N0648
Red
21 24 1.44 60 120°
620~630nm 27
True Green 520~535nm 60
Blue 465~475nm 14
LBMRTB-N28/N0649
Red
28 24 1.92 80 120°
620~630nm 36
True Green 520~535nm 80
Blue 465~475nm 18
LBMRTB-N42/N0650
Red
42 24 2.88 120 120°
620~630nm 54
True Green 520~535nm 120
Blue 465~475nm 28
LBMRTB-N56/N0651
Red
56 24 3.84 160 120°
620~630nm 72
True Green 520~535nm 160
Blue 465~475nm 36
Table 8. LBMRTB-Nxx/N06xx series electrico-optical characteristics.
Note : Flux is measured with an accuracy of ± 10%.
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
14
Assembly Instructions
1.Use M3 screw to secure the clamp on a level surface.2.Push-lock the lightbar.
Note : Every lightbar comes with a set of accessories including two clamps and two M3 screws.
Figure 21. PLCC lightbar with heatsink series (IP67) Assembly Instructions.
Lightbar
Screw
Clamp
Level Surface
Clamp Dimensions
Unit: mm16.652.1
0.4
20.65
6.1
R0.4
R0.4
R0.4
7.4
3.5
20
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
15
Installation Guide
Item Part Number Recommended quantity(pcs)
Recommended maximum operating current
30cmLBMx-F16 series
12
2A
LBMRTB-N14 series
45cmLBMx-F24 series
8LBMRTB-N21 series
60cmLBMx-F32 series
6LBMRTB-N28 series
90cmLBMx-F48 series
4LBMRTB-N42 series
120comLBMx-F64 series
3LBMRTB-N56 series
1.For extended utilize, please join the lightbar male port to the other lightbar’s female port
with connector.
2.The recommended maximum quantity and operating current is showing as below:
Note : We recommend to apply drivers both on the fromt and the end if over recommended quantity or current.
Table 9. Recommended quantity
Figure 22. Drivers connection diagram
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
16
Recommended assembly methods
Press
Red Cable: V+
Red Cable: V+
Black Cable: V-
Black Cable: V-
Figure 23. Single color series of assembly methods
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
17
Figure 24. RGB series of assembly methods
Step1Make a connection between the male and female side of the wire. Please notice that the colors of the wires are different. Be sure the same color is connected at the same side.Step2Use the recommended connector to link a light bar and a driver. Put the cables of the wire and driver into each side of the connector. Make sure the red cable of the wire is linked to the positive terminal of the driver (also in red), and vice versa.Step3Ones the cables are inside of the connector, press down the bottom of the connector and make sure the cables are tight fixed.
Press
Blue Cable:B-
Blue Cable:B-
Green Cable:G-
Green Cable:G-
White Cable:V+
White Cable:V+
Red Cable:R-
Red Cable:R-
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
18
Cable preparation
Before use make sure the applicable cable is clean and free of superficial pollution like dust or other substances that can compromise the insulation level. When stripping the cable jacket make sure it is a straight clean cut and prevent at all times that the insulation of the wires within the cable are damaged or cut in. The stripped jacket end shall be cut under a maximum angle of 10°. Proper cutting tooling shall be used to avoid spacing deformation and burrs.
Notes:
1.To prevent the defect of water resistance, the bare wire is recommended to be cut off or be kept less than 2
millimeter
2.The Connector do not reuse.
Wires terminated correctly Wires terminated correctly
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
19
Accessory
Wire
Connector
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ±1.0 mm.
16.5 250
8JST 02R-JWPF-VSLE-S
500
JST 02T-JWPF-VSLE-S JST 02R-JWPF-VSLE-S
16.5 250
8JST 04R-JWPF-VSLE-S
500
JST 04T-JWPF-VSLE-S JST 04R-JWPF-VSLE-S
Figure 25. 2P-P250-2 (250mm, IP67, male)
Figure 27. 2P-D500-2 (500mm, IP67, male/female) Figure 28. 4P-D500-2 (500mm, IP67, male/female)
Figure 26. 4P-P250-2 (250mm, IP67, male)
Figure 29. 2P-NCS-2 Connector (IP67)
For combine the Lightbar with the Driver
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ±1.0 mm.
3. The driver's red wire which is a positive terminal goes to Connector the same side of connector's positive
terminal.+
36.4
11.4
11.4
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
20
Driver
Dimmer
Proposal with the product :
MEAN WELL :CLG-60-24 (24V, 2.5A, IP67)
CLG-100-24 (24V, 4A, IP67)
Notes:
Please select the driver with an appropriate total output power which is corresponded to the connected lightbar. Total connected current
is recommended less than 2 Ampere.
For LBKRTB-M240 seriesEdison : AWCL-120-6P Driver
Environmental Compliance
PLCC lightbar with heatsink series are compliant to the Restriction of Hazardous Substances Directive or RoHS. The restricted materials including lead, mercury cadmium hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ether (PBDE) are not used in PLCC lightbar with heatsink series to provide an environmentally friendly product to the customers.
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
21
Application Notes
PLCC Lightbar series are available in red, yellow, green, blue, white, neutral white and warm white for application such as under-cabinet lighting, cove lighting and wall washing. Moreover, additional fine-tuned high color rendering index (CRI) version of white, neutral white and warm white all make PLCC Lightbar the ideal lighting choice for vividly displaying fruit and vegetables and/or refrigeration products, presenting the true color of the products and reflecting the freshness of goods.
www.edison-opto.com
Copyright © 2012 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3
Lighting Design Manufacturing Service
22
About Edison Opto
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at www.edison-opto.com
Copyright©2012 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice.
www.edison-opto.com
For general assistance please contact:[email protected]
For technical assistance please contact:[email protected]
Revision History
Table 10. Revision history of PLCC lightbar with heatsink series datasheet
Version Description Release Date
1 1.Establish a datasheet 2009/08/07
21.Add RGB Series
2. Add package information IP57-->IP67
2009/08/26
31.Add installation guide on p.15~17
2.Add Cable preparation on p.183. Add Accessory info on p.19~20
2012/01/31