FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound, Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 - 2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 & 4155652 Email: [email protected], [email protected]Website: www.rajivpapermahcines.com Changes: RMPL products undergo continuous development. The technical data in this catalogue are YOU ARE WELCOME TO RAJIV MACHINES (P) LTD. INDIA MANUFACTURER EXPORTERS OF ALL TYPES OF PAPER MILL INSTRUMENTS • MOTORISED BASIS WEIGHT VALVE • CONSISTENCY TRANSMITTER & CONTROL • MOTORISED STEAM CONTROL VALVES • CONTROL VALVE ACCURATOR • AUTO GUIDES • LAB INSTRUMENTS • PAPER PLANTS WE ARE ALSO EXCLUSIVE REPRESNTATIVE IN INDIA FOR PRESSURE SCREEN BASKET MANUFACTURED BY WORLD LEADER
Transcript
Slide 1
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
YOU ARE WELCOME TO RAJIV MACHINES (P) LTD. INDIA MANUFACTURER
EXPORTERS OF ALL TYPES OF PAPER MILL INSTRUMENTS MOTORISED BASIS
WEIGHT VALVE CONSISTENCY TRANSMITTER & CONTROL MOTORISED STEAM
CONTROL VALVES CONTROL VALVE ACCURATOR AUTO GUIDES LAB INSTRUMENTS
PAPER PLANTS WE ARE ALSO EXCLUSIVE REPRESNTATIVE IN INDIA FOR
PRESSURE SCREEN BASKET MANUFACTURED BY WORLD LEADER
Slide 2
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
QUADRANT SCALES (RMPL-1001) Rigid tubular pendulum with hardened
bearing for needle. Sturdy pendulum design combined with low center
of gravity gives these scales outstanding stability and
reliability. Basket of Steel Wire Cast tripod base with chromium
plated levelling screw. Stainless Steel tearing templates (
Quadrant Scale in double graduations shows direct weight in GSM.
OPTIONS: Range Available: Single Graduated Scales: A)0-250 GSM
SIZE: 20x25CMS & 40x25CMS B)0-500 GSM SIZE: 20x25CMS &
40x25CMS C)0-1000 GSM SIZE: 20x25CMS & 40x25CMS
Slide 3
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
DIGITAL GRAMMAGE TESTER (RMPL- 1001 B) Digital Grammage Tester is
intended for measuring the GSM very rapidly and accurately. One can
measure GSM up to 15000 GSM. By using this scale. 10cm x 10cm.,
Test Sample of paper, board or other sheet materials is kept on the
Balance for accurate measurement of GSM. Accordingly Digital
Reading in GSM is seen on the screen provided for the same.
STANDARD FEATURES Fast Weighing Response Micro Processor Controller
A C indication Check Weighting Re-chargeable battery back-up Auto
Power Off System Auto Zero Tracking High Brightness LED Stability
Indication SPECIFICATIONS :- MODEL CAPACITY READABILITY PAN SIZE
RMPL-1001B 15000GSM 1GSM 110MM DIA DIGITAL GRAMMAGE TESTER
Slide 4
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
PRECISION THICKNESS MICROMETER (RMPL-1003) Measuring spindle with
constant lowering speed (1 mm/sec,2mm/sec ) and Single Button
Operation (Motorized). Hardened and lapped measuring face Provided
with Optical Transducer which scan a line screen. Compact Models
with digital display Test area: 2 cm2 (This means that the pressure
applied by the weight shall be about 2 Kg.) Steady Pressure: 1
Kg/cm2 (98.0 Kpa) Throat Depth: 75 mm. Measuring Range: 0-20 mm
Resolution: 1mm Dead weight load: Fixed. Lowering Speed: Fixed,
Controlled Power Supply/Consumption: Single Phase 230/240 V - 25 W
Power Supply/Consumption: Single Phase 230/240 V - 25 W Versions
Available and compliance Standards: Dead Weight Surface Lowering
Example Load Kg. Size cm2 Speed mm/s of Standards 2 2 1 SCAN - P7 2
2 2 ISO 534, DIN 53105 1 2 0.8 TAPPI T 41, T 426 M-46 2 10 2 FEFCO
No 3, SCAN P31 0.2 10 1 SCAN P47
Slide 5
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
FOLDING ENDURANCE TESTER (RMPL-1006) Two specimen can be tested
simultaneously. The number of folds is registered by two counters
which are stopped automatically, when the specimen breaks. Folding
clamps quick grip type of stainless steel for a strip width of 15
mm. Absolutely vibration free run of folding clamp, due to the
absence, of a conventional geared drive. Loading clamps of with
weight bars and weights steps of 50 g give loads between 1.96 and
9.32 N. Standard load according to SCAN and ISO is 7.85 N
(corresponding to a weight of 800 g) Five figure counters with zero
setting. Folding angle: 3120. Folding speed: 200 double folds/min.
Dimensions of Test Strip: 15 X 100 mm. Motor rating (with pulley):
400 V 3 Phase 220 V 1-Phase. 50 Hz. Applicable standard: Relevant
SCAN std.
Slide 6
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
TEARING TESTER (RMPL-1007) Easy to operate and has high accuracy
level 1% of readout value and reliability. Adjustable base
levelling screw. Incision knife of hardened and ground spring
steel. Precision clamps with controlled jaws, made of stainless
steel. Extra light low friction. Pointer with friction lining of
textile material. The complete pendulum is exchangeable. Scale
calibrated in mN SPECIMEN: Height 62 mm 0.2 mm. Length: 50 2.0 mm
Interchangeable Pendulums having the following capacities:
Calibration Check Weights Tearing Sample cutter For preparation of
tearing test specimen Window base software program for data
colleciton to a PC. RS 232 C interface Cable for Data acquisitions
software. APPLICABLE STANDARDS: TAPPI T-414, APPITA P-400, SCAN
P-11, ASTM D 689, D 751, D 1424
Slide 7
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
PRECISION TEST STRIP PUNCH & DIE CUTTER (RMPL 1008) Available
for the following 15 X 300 mm test piece sizes: 25 X 300 mm 50 X
300 mm 1/2 X 6 inches Accuracy Test piece width 15 mm, 25 mm and
1/2 inches: 0.05 mm Test piece width 50 mm 0.1 mm Test piece length
0.1 mm Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to
change
Slide 8
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
BURSTING STRENGTH TESTER - FOR PAPER RMPL(1009 A) SPECIFICATIONS
Heavy Duty Cast Iron body. Compression foot of plexigalss with
clamping plate of acid proof steel. More uniform and better control
piston speed. Adjustable Clamping Force Motor suspension in rubber
cradle. Lever actuates the raising and lowering of the upper clamp.
The Bursting Pressure, at the time of rupture is recorded on a
sensitive pressure gauge. Specimen Clamp-Upper Part: 30.48 mm
Specimen Clamp-Lower Part: 33.07 Flor Rate: 95 10cc/min Motor:
150W, 220V AC Single Phase/ a as per your order All pressure gauges
are statically and dynamically calibrated. One pressure gauge is
fitted as standard having peak value indicator. Two way valve is
provided for extra pressure gauge. Units supplied with C spanner, 3
spare diaphragms and glycol topping-up fluid. Various Standard
Pressure Gauges Supplied on Demand: 0 - 2, 0 - 4, 0 - 7, 0 - 10, 0
- 14 Kg/cm2 Complies with following International Test Standards:
TAPPI T 807 om-83, T 810 om-85, T 403 om-85, APPITA P-438, SCAN
P-24:77, P-25-68, BS 3137, ISO 2758, CPPA D8
Slide 9
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
BURSTING STRENGTH TESTER - FOR BOARD RMPL(1009 B) SPECIFICATIONS
Heavy Duty Cast Iron body. Compression foot of plexigalss with
clamping plate of acid proof steel. Uniform control piston speed.
Adjustable Clamping Force Motor suspension in rubber cradle. Wheel
Handle actuates the raising and lowering of the upper clamp. The
Bursting Pressure, at the time of rupture is recorded on a
sensitive pressure gauge. Specimen Clamp-Upper Part: 30.48 mm
Specimen Clamp-Lower Part: 30.48 mm Pressure Speed: 170 +10ml/min
Motor: 150W, 220V AC Single Phase/38v 3 Phase All pressure gauges
are statically and dynamically calibrated. The gauges are provided
with a quick coupling and a device which prevents air from entering
in the hydraulic system, when fitting the pressure gauge. One
pressure gauge is fitted as standard having peak value indicator.
Two way valve is provided for extra pressure gauge. Units supplied
with C spanner, 2 spare diaphragms and glycol topping-up fluid.
Various Standard Pressure Gauges Supplied on Demand: 0 - 10, 0 -
14, 0 - 21, 0 - 28, 0 - 40, 0 - 70 Kg/cm2 Complies with following
International Test Standards: TAPPI T 807 om-83, T 810 om-85, T 403
om-85, APPITA P-438, SCAN P-24:77, P-25-68, BS 3137, ISO 2758, CPPA
D8 OPTIONS Standard Pressure Gauges with Indicator for Peak Value.
Double Graduation in Kg/cm2 and PSI.
Slide 10
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
BURSTING STRENGTH TESTER (RMPL-1009-C) Heavy Duty Cast Iron body.
Adjustable Clamping Pressure Compression foot of plexigalss with
clamping plate of acid proof steel. More uniform and better control
piston speed. Clamping force adjustable by means of pressure
reducing valve Motor suspension in rubber cradle. A valve with
lever actuates the raising and lowering of the upper clamp.
Clamping pressure applied by pneumatic cylinder. For Paper Specimen
Clamp-Upper Part: 30.48 mm 0.05 Specimen Clamp-Lower Part: 33.07 mm
0.05 Pressure Speed:For paper 95 10ml/min For Board Model RMPL 1010
C-II Specimen Clamp-Upper Part: 31.50 mm 0.05 Specimen Clamp-Lower
Part: 31.50 mm 0.05 Pressure Speed:For paper 170 10ml/min Motor:
150W, 220V AC Single Phase/ a as per for order Units supplied with
C spanner, 3 spare diaphragms and glycol topping-up fluid. Complies
with following International Test Standards: TAPPI T 807 om-83 T
810 om-85 APPITA P-438 SCAN P-24-77/ P-25-68
Slide 11
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
DENSOMETER (RMPL-1011) Weight of inner cylinder 567 1 g, provided
with the ring mark for measuring air leakage through the specimen.
Outer cylinder of Chromium Plated Brass.Inner cylinder of light
metal with top of Chromium Plated Brass. Support spring for the
inner cylinder in the raised position. Self aligning clamping plate
of stainless steel with ground top surface. Rubber Gasket for air
tight sealing for sample Orifice Area 1 inch2: (645 mm2) Complies
with the International Standards SCAN P19 66 TAPPI T 460 SM 49
APPITA P 420 CPPA D 14 OPTIONS: Electronic self starting timer for
automatic measuring of either 25, 50, 100, 150, 200 or 300cm3 air
to pass through the test specimen. The timer starts automatically
when the zero slit of the graduated ruler pass an optional read
fork and stops automatically as soon as the predetermined volume of
air has been passed through the sample.
Slide 12
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
SMOOTHNESS & POROSITY TESTER BENDSTEN TYPE (RMPL-1012) Self
contained air supply. Three rotameter tubes: 5 - 150, 50 - 500 and
300 - 3000 ml/min. Contact Pressure roughness 98 kPa(14.2 psi).
Additional hardness measuring weight contact pressure 490 kPa (71
psi). Air Pressure: 3 Manostat weights, which give constant
pressure of approx. 0.75, 1.5 & 2.25 kPa. Ensures an accurately
regulated constant air supply. Accessories Included: Air Permeance
measuring Head. Face ground glass plate. Separate compressor
electrically operated Extra weight for compressibility
measurements. Plane Holder - keeps the sample flat. Power Supply /
Consumption: 220 / 240 V Single Phase 50 Hz. / 75 W. Compliance
with International Standards APPITA/AS 1301.440, DIN 53120, DIN
53108, ISO 5636/3, SCAN P60 ISO 8791/3, ISO 8791/4, ISO 2494
Slide 13
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
FLUFF TESTER (RMPL-1013) plates cylinder. Nip pressure: 13.5 Kg.
Blanket cylinder: 10 wide X 6 dia. Blanket material: can be easily
changed After selected number of sheets have been passed through, a
linen counter mounted at the top of the machine is used to count
the number of particles and fibres adhering to a given area of
blanket. Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to
change
Slide 14
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
STIFFNESS TESTER - Taber Type (RMPL-1014-A) Test Range: 0-10,000
stiffness unit. Test Material Thickness 0.004 to 1/8 of an inch (if
within load range of instrument)Pendulum Two Directional Specimen
Size: 38 X 70 mm (15 X 2.75 inch) for bending distance of 5 cm. 38
X 38 mm (15 X 15 inch) for bending distance of 1 cm. Load 5000 unit
at 15 degree (standard bending) 10000 unit at 7.5 degree (standard
bending) Roll Diameter 10.5 mm and 11 mm factory calibrated
accuracy of 1% full scale in each range. Drive by small gear motor
rated for 220V AC, 2 rpm, 50 Hz electrical components sealed in
housing. The Tester conforms to following TAPPI 489 m-69
international Standards: ASTM D-747-61-T JIS P-8185 The instrument
is provided with accessories, including a shear for cutting
material test specimens, additional weight for extending the test
range and 10 unit compensator weight for 0-10 stiffness unit.
Slide 15
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
ELECTRONIC STIFFNESS TESTER (RMPL-1014-B) Measuring results:
Bending Resitance in mN at specified angles Bending Stiffness in
mNm under specified conditions. Bending angle: Infinitely variable
50 & 300 and six fixed positions 50, 7.50, 150, 200, 250 and
300 Bending length: 5, 10, 15, 20 15 & 50 mm. Bending Speed: 50
/s. Strip Dimensions: Width 38 mm (1.5) Thickness max 3 mm.
Measuring range: 0-5000 mN. Accuracy: 2% of reading but not better
than 1% of load range. Analog Output 0-10 V. Power Consumption: 50
W. Power Supply: Single Phase, 220 V, 50 Hz OPTION Load Cell range
0-10000 mN ACCSSORIES Triple Shear Cutter to prepare the test
sample. Standard calibarted dead weigths. APPLICABLE STANDARDS ISO
2493, DIN 53121, BS 3748, NF Q 03-048, SCAN P29
Slide 16
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
REFLECTANCE METER - Photovolt Type (RMPL-1015) Display System:
Digital Direct read out. Measurement: Brightness, Opacity and
Gloss. Measurement Area: 10mm Dia. Light Source: 6V, 1 A. Tungsten
Lamp. Filters (kinds): Blue, Green, and Amber. Sensor: Selenium
Photocell. Brightness Search Unit: Consist of deep blue gelatine
filter #49, between photo voltaic cell, Infrared absorbing glass
and source of light. Opacity Search Unit: Consist of green filter.
Gloss Search Unit: Consist Glass filter and measures gloss as
specular reflectively at 750 angle of incidence. Power Supply: 230
5% volts, 50 cycles AC. Provided with a built in highly stabilized
power supply to stabilize light intensity of the lamp. ACCESSORIES:
I. White Enamel Standard. ii. High Reflectance White Enamel
Standard. iii. Polished Black Glass. iv. Cavity represents a sample
of zero reflectance. The unit has been designed in accordance with
TAPPI, ASTM and ISI (1060 Part II) 1960 standards. OPTIONS: Device
for measuring, brightness of powdered materials, conforming to
TAPPI useful method - 605 (formerly RC 127) Changes: RMPL products
undergo continuous development. The technical data in this
catalogue are therefore subject to change
Slide 17
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
COBB TESTER (RMPL-1017) A device to determination of the weight
increase of a sample contact with water for a given time. The mass
of water absorb in a specific time by a one square meter of paper,
board, corrugated fiber board under specified conditions is called
water absorptiveness or cobb value. It also indicates the additive
substances applied during process that improves printing quality
and resistance to liquids. Test area: 100 cm2 Level indication:
Indication for 100 ml on the inside of the cylinder Couch roll:
Stainless Steel roller having a smooth surface Width 210 mm (8)
Diameter 88 mm (3.6) Weight 10 Kg. +- 0.5 Kg. Option: Stop watch
Graduated cylinder 100 ml Balance.001 gram Advantage To check the
water absorbency of paper and board. Amount of water absorbed in
45-sec./60 sec./120 sec (as case may be) under 1 cm. head by one
side of unit area of paper placed horizontally
Slide 18
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
OIL PENETRATION TESTER Williams Type (RMPL-1019) The instrument
chamber has an orifice for holding the liquid medium and a clamping
device for holding the material. Electronic Thermostat provided to
keep the liquid at the desired temperature 35 1 degree C.
Penetration time after oil comes in contact with paper is noted by
stop watch or electronic timer. Double processed castor oil having
viscosity of 700 30 centipoise at 250 C or mineral oils of the same
viscosity and comparable wetting characteristics are used. Suitable
range thermometer also provided.Changes: RMPL products undergo
continuous development. The technical data in this catalogue are
therefore subject to change
Slide 19
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
PAPER SURFACE OIL ABSORBENCY TESTER Pira Type (RMPL-1020) Inclined
plane 500 X 100 mm with a 4.5-degree gradient. Inclined plane
covered with rubber-offset blanket Roller 2.1 Kg, 76 mm diameter
and 55 mm wide lined with Neoprene. 50 CC Paraffin oil with density
of 0.88 and viscosity of 1.28 poise at 250C. Oil-burette delivers
0.02G oil droplets. 10 scale division = 0.0015 ml. Steel holder for
oil burette. Using an average of 10 tests, the SORT (Surface Oil
Resistance Time) can be determined. The SORT is the time taken for
the 75% of the surface covered by oil to have absorbed the oil. The
test is very sensitive to temperature. Results should only be
compared at identical room temperatures. OPTION Photoelectric Timer
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to
change
Slide 20
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
ELECTRONIC LAB CRUSH TESTER (RMPL-1021) Memory for retaining peak
value Adjustable thresholds to obtain the optimum peak value of
Flat Crush Test Simple and accurate readout on a digital display.
Electronic Force measurement by Load cell Measuring Results:
Breaking Force in Newton. Stroke Length: 76 mm. Deformation Speed:
Calibrated 12.0 mm/min or variable speed selectable up to 50
mm/min. (Metric version) Return Speed: 50 mm/min approx. Plate
Size: 125 X 125 mm. Measuring Range: 0 - 5000 N and 0 - 1999 N
(Metric Version) Accuracy: 1% of measured value but not better than
0.5% of the nominal value Rupture Sensitivity: 2 - 20 % of the
relevant maximum load. Power Consumption: 200 W Power Supply:
Single Phase, 220 V, 50 c/s Options Precision Circular Punch &
Die cutter For preparation of test pieces towards Ring Crush Test.
width 12.5 mm. Circular Cutter: For cutting out circular sample of
board and similar material towards use in Flat Crush Test. Circular
Neck Down Cutter - For preparing test pieces for measurement of
Edge Crush Test Accessories For RCT, CCT and ECT Applicable
Standards APPITA/AS 1301.449, FEFCO No. 50 CMT: CPPA D.24, DIN
53143, ISO 7263, SCAN P27, TAPPI T809. RCT: CPPA D.33, DIN 53134,
SCAN P34, TAPPI T818 and T822 ECT: DIN 53149, FEFCO No. 8, ISO
3037, NF Q 03-041, SCAN P33, TAPPI T811 and T823 FCT: CPPA D.20,
FEFCO No. 6, ISO 3035, NF Q 03-033, SCAN P32, TAPPI 808.
Slide 21
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
INTERNAL PLY BOND TESTER (RMPL-1022) Made of Heavy cast iron base
with built-in leveling device pressure sensitive tape dispenser
integral with base. A Stationary Anvil and separable platen, which
the pendulum strikes at the same point for each test. A pendulum of
dual capacity 0-0.25 FT/LB and 0.1-0.5 FT/LB. Foot pound and free
to swing on a fall bearing. The range changing weights must be
placed so as not to alter counter of gravity of pendulum. A means
of holding the pendulum in raised position with a provision
instantaneous release. A means of registering the maximum arc,
enough, which the pendulum swings when, release. A scale calibrated
in thousands of a foot pound in both ranges, with a reference point
for calibrating the pointer in free swing to compensate for
friction windage. A multiple specimen preparation station, which
will allow for variations of specimen thick nesses, with optional
clamping pressures on the specimen from 50 to 200 PSI in 50PSI
increments.
Slide 22
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
BEATING & FREENESS TESTERS (RMPL 2002) BEATING & FREENESS
TESTER Schopper Reigler Model (RMPL-2002) SPECIFICATIONS pulp
Sample consistency: 0.20% Pulp Volume: 1000 ml. Repeatability 1 0SR
Graduation on the discharge collecting cylinder: 0SR Plexiglas
measuring cylinder with double graduation on ccm and 0SR Cal
liberated Nozzle and screen plate container grip enabling easy
removal for cleaning. Standard wire mesh fixing and removing
attachment Semi Automatic Sealing cone lifting arrangements.
Complies with SCAN standard M-3.65 RMPL products undergo continuous
development. The technical data in this catalogue are therefore
subject to change
Slide 23
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
BEATING & FREENESS TESTERS (RMPL 2003) BEATING & FREENESS
TESTER - CANADIAN TYPE (RMPL-2003) SPECIFICATIONS Canadian Freeness
Tester has its container sealing lids sprung loaded and swivel
through 900. The lids are opened by means of light pressure on the
release handles. The container grip enable easy removal for
cleaning. Its Nozzle and screen plate are calibrated according to
relevant standards. Two measuring cylinders are included. Standard
equipment has a bench top stand. Alternatively wall mounted model
can be supplied on request. Capacity of the cylinder: 1000 ml above
the screen plate. The Volume in the Bottom 23.5 0.2ml (adjusted by
means of section of the cone the threaded plug in the side orifice)
Any change in this volume may affect the calibration. Slope of the
main cone: 290 5 min. Orifices provided in funnel Two, one at the
bottom & other on the side. Distance between the overflow 50.8
mm 0.75 mm lip of the tube (inside the funnel) Note: This is
extremely critical and and bottom of the funnel section set
precisely at the works. Size of the perforations in the 0.50 mm
diameter. screen plate Compliance to the following ISO 5267/2
International Standards CPPA C1 BS 6035/2 TAPPI T 227 M-58 OPTIONS
Wall mounted model. Changes: RMPL products undergo continuous
development. The technical data in this catalogue are therefore
subject to change
Slide 24
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
Semi-Automated Sheet Former (RMPL 2005 B) Semi-Automated Sheet
Former (RMPL-2005-B) SPECIFICATIONS Standard Sheet Former with
integral pneumatic couching Suitable for sheet formation of 165 mm
diameter Control cabinet for regulation of filling, air agitation,
settling and drainage. Complete with switch control box accessories
to provide 600 KPA air supply to the sheet former and drainage
system connection, water inlet supply automatically. Shut off after
filling air agitation of stock, settling of the stock immediately
following automatic shut off of agitation, drainage commencing
automatically at the end of settling cycles and signals when
complete. On completion of pneumatic couching, controls reset for
next cycle. It is suitable for operation on 220-250 V 50 Hz AC.
OPTIONS Square Punch for trimming sheets 200 cm2 Laboratory
Blotting Paper White Water Recirculation System Changes: RMPL
products undergo continuous development. The technical data in this
catalogue are therefore subject to change
Slide 25
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
SHEET PRESS (RMPL 2007 A) SHEET PRESS (RMPL-2007-A) SPECIFICATIONS
Press top made of duralumin to give lightness and rigidity. Press
plattens of stainless steel. Press top secured by 4 rapid action
clamping and release nuts, facilitating taking in and out the
specimen. Maximum sheet size 165mm diameter. Working Pressure 3.5
Kg/cm2 Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to
change
Slide 26
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
PULP DISINTEGRATOR (RMPL 2008) PULP DISINETGRATOR (RMPL-2008)
SPECIFICATIONS Capacity: 2 Litres. Rotational Frequency: 2975 25
rpm. Motor: 0.5 KW, 3 Phase, 440V AC Safety System: Double Safety
System permits start only when drive unit and vessel are in correct
working position. Applicable Standards: ISO 5263, TAPPI 205/220
SCAN C18/M2, CPPA C6 OPTIONS: 1. Preset Pulse Counter on front
panel for setting desired number of revolution. 2. Pulp Container
with Heating Elements, Thermostat and 100% safe insulation. The
thermostat control is set at 85 0C to maintain constant temperature
of stock Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to
change
Slide 27
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
RAPID SHEET DRYER (RMPL 2009) RAPID DRYER (RMPL-2009)
SPECIFICATIONS Rectangular Drying Plates. Lower plate is lined with
wire cloth to lead off the vapour during the drying process.
Provided with overheating protector. Switch provided with indicator
lamp. Upper and lower drying plates are heated with flat electrical
elements. Sheet Size: Max. width 250 mm Max length 300 mm
Temperature range : Adjustable over a wide range, upto maximum of
180 0C 10 0C. Heaters: Flat Electrical Elements single phase, 220
V, 400 W each for upper and lower plates Power Supply /
Consumption: 220 V, Single Phase, 50 Hz. / 800 W Applicable
Standard: SCAN M- 1 Changes: RMPL products undergo continuous
development. The technical data in this catalogue are therefore
subject to change
Slide 28
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
SHEET DRYING CYLINDER (RMPL 2010) SHEET DRYING CYLINDER (RMPL-2010)
SPECIFICATIONS Drum Cylinder Size: Diameter: 800 mm Width: 700 mm
Drum Diameter: 500 mm Drum Width: 600 mm Fan Motor: 0.1 HP Heater
Capacity: 2 KW, 220 V AC Rotating Speed: 5 r.p.m. Working Surface
Temperature: 600C The Drying Cylinder consist of a frame mounted
cylinder, guide roll and break roll. The cylinder is electrically
heated and the fan mounted in the cylinder circulate the heated air
inside the cylinder. The required drying temperature is adjusted by
thermostat. Changes: RMPL products undergo continuous development.
The technical data in this catalogue are therefore subject to
change
Slide 29
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
WOOD CHIP CLASSIFIER (RMPL 2013) CHIP CLASSIFIER (RMPL-2013) Sample
size: 8 - 10 litres. Recommended dry content: 40 - 70%. Screening
time: 10 minutes (Wet chips samples to be dried for 1-2 hrs before
screening) Screening trays: Made of aluminium, (Shaken in
horizontal plane by means of an eccentric gear) Shaking frequency:
2.7 Hz. Stroke: 120 mm. Recommended Standard Screen: (From Top) No.
1 With 45 mm Dia Hole and triangular pitch 60 mm. No. 2 With 8 mm
wide slots No. 3 With 7 mm dia holes and triangular pitch 8.5 mm
No. 4 With 3 mm dia holes and triangular pitch 8 mm No. 5 Dust Pan
Motor 1 HP, 1400 rpm, 415V, 3 Phase, 50 Hz. Power Consumption 0.2
KW Rugged Steel stand with guard rail. OPTIONS Other hole diameters
and slot width. Other power supplies. Changes: RMPL products
undergo continuous development. The technical data in this
catalogue are therefore subject to change
Slide 30
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
LABORATORY ROTARY DIGESTER (RMPL 2015) ROTATING AUTOCLAVE
(RMPL-2015) SPECIFICATIONS Capacity: 15 Litres cooking vessel
Maximum Pressure 15 Kg/cm2 Raw Material 3.0 Kg. wood chips approx.
Digester body: Made of Acid Proof Steel. Autoclave Fabricated from
tested boiler plate with inside lining of stainless steel sheet.
Electric Heating 3 Phase, 400 V, 4 kW. Rotating Frequency; Rotation
with change of turning direction, ensures efficient agitation of
the pulp. Motor Rating: 3 Phase, 440 V, 1/2 HP. Digester provided
with Temperature Indicator, Pressure indicator, Safety Valve and
needle valve. Control Panel an infinitely adjustable power
regulator for heating function and other controls required for
operation. OPTION Microprocessor Regulator for more detailed
pre-programming of boiling sequence Bombs Changes: RMPL products
undergo continuous development. The technical data in this
catalogue are therefore subject to change
Slide 31
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
LABORATORY HYDRA PULPER (RMPL-2017) LABORATORY HYDRA PULPER
(RMPL-2017) SPECIFICATIONS Container capacity: 10, 30 & 50
litres. Consistency: 5% maximum Speed: 300 RPM. Propeller V-Belts
drive and a circulates the stock effectively to disintegrate
material rapidly. Stainless Steel 316 vessel duly insulated with
Glass Wool Heating System with adjustable Thermostat Control Heat
Capacity 2 KW. Electric Motor 3 Phase 440V, AC. Changes: RMPL
products undergo continuous development. The technical data in this
catalogue are therefore subject to change.
Slide 32
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
FIBER CLASSIFIER BAUER Mc NETT TYPE (RMPL 2018) FIBRE CLASSIFIER
(RMPL-2018) SPECIFICATIONS The primary unit has an inlet funnel
with an overflow and the nozzle for a constant water flow rate.
Fractionating unit is completely self contained having its own
electric motor for the rotor and is made of non-corrosive material.
Fibre collection box with rapid locking device, support wire and
suction connection. Interchangeable screens are available with wire
of 4, 6, 8, 10, 14, 20, 30, 50, 100 and 200 standard mesh. Standard
wire mesh size 30, 50, 100, 200 as per TAPPI Standard OR Standard
wire mesh size 28, 48, 100, 200 as per SCAN Standard The screen
frames are clamped hydraulically by water pressure / pneumatically
clamped by compressed air. Classifier gives a very low spread in
the results with a variation coefficient of less than 1%. Flow
speed 10 litre/min. Pulp 10g (oven dried) Required time for
screening 20 min. Motor 0.25 HP AC 3 Phase, 60 W per unit. Air
Pressure: 0 - 6 Kg/cm2 Water Pressure: 2 Kg/cm2 Changes: RMPL
products undergo continuous development. The technical data in this
catalogue are therefore subject to change
Slide 33
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
VIBRATING STRAINER JOHNSON TYPE (RMPL 2019) VIBRATING STRAINER
(RMPL-2019) SPECIFICATIONS WITH THREE NO. EXTRA SCREENING PLATES
WITH SUITABLE WIDTH & LENGHT Average capacity equivalent to 5
kg. dried pulp per hour. Strainer Area 500 X 240 mm. Standard
Strainer plate has 0.15 mm slit width. Motor Drive 0.5 HP 1440 rpm.
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to
change
Slide 34
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
LABORATORY CALENDER ( RMPL 4002 ) 3 Roller stack with a machined
face width of 300 mm. Adjustable line pressure with a range of
0-100 Kg per linear cm by means of hydraulic cylinders and
electrically driven operated pump complete with oil tanks etc. Top
and bottom chrome plated polished steel rollers have diameter of
130 mm. The top roller is electrically heated and thermostatically
controlled, temperature range room temperature to 1000. Middle
roller may be of cellulose and wool fibre or as per your
requirement. Bottom roller with to specified speed 11.2 or 22.5 M
per minute. Unwindd stand, Unwind shaft and brake supplied as
standard. Power supply 3 Phase 380V, 50 Hz.
Slide 35
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
LABORATORY OVEN ( RMPL 5001 ) Outer chamber of MS sheet and inner
chamber Stainless Steel or aluminium sheet. Pure glass wool
insulated with gap of 65 mm. Door is fitted on heavy cast and
chromium plated brass hinges with insulated handle to push and pull
the door. Outside finish in Hammertone or Synthetic cream or white.
Three switches, Two pilot lamps, Two movable shelves, 150 cm cord.
Three pin plug and L-shape horizontal thermometer. All heating
elements made from best 80/20 composition nickel/chromium imported
KANTHAL wire. Rib heat radiation system works on 220/230 V single
phase AC only. Temperature from room temperature to 250 0C an
accuracy of thermostat 1 0C to 2 0C or less. Air enters through the
holes at the bottom and leaves through the adjustable exhauster
(chimney) at the top or on both the side of the oven by gravity
covection. Inner chamber size: 14" X 14" X 14", 18"X 18" X 18", and
other standard size. Instrument Size Depth: 25" Width: 31" Length
31" Weight Width: 60 Kg.
Slide 36
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
BOD INCUBATOR (RMPL-5004) Double walled, Heavily insulated.
Temperature range 5 0C to 50 0C. Accuracy 0. 5 0C. Automatic
control. Double door construction Inner Chamber size: 455 X 610 X
410 mm 505 X 830 X 415 mm 570 X 875 X 550 mm 900 X 650 X 550
mm
Slide 37
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
LAB VALLEY BEATER (RMPL 2016) VALLEY BEATER is intended for testing
disintegration, beating or mixing of pulp under standardized
conditions. A measured amount of pulp of specified stock
concentration is beaten between the bars of the roll and the
bedplate of a valley beater. Samples of beaten pulp are taken at
certain intervals during the beating and formed test sheets from
samples are applied under standard tests. It Conforms to
international Standard TAPPI and SCAN. Acid proof material tub with
stainless steel ground and internally polished. Hardened bedplate
bars having a Brinell hardness of 325 to 357 HB. Hardened beater
roll flybars having a Brinell hardness of 350 to 400 HB. Adjustable
beating pressure by means of weighed lever arm ratio 1.94 to 1 and
a dead Weight load of 5500 grams applied to longer arm generates a
force of 105 N or bed plate. Beater roll speed 8.3 r/s 0.2 r/s.
Beater roll beater diameter 168 mm, with 32 flybars inserted the
combined diameter is 190mm- 194mm. Roll flybars thickness 4.7 mm
and width of roll 152 mm. 7 no. bed plate bars, thickness 3.2mm,
set in lead, 2.4mm apart. Net tube volume 25 litres. Width of plate
is 159 ml. 1.5 mm. Thick flexible, rubber diaphragm between the
bedplate and bottom of beater. Floor stand with the motor and belt
drive, coated with anti corrosive paint. CONNECTIONS :- POWER
SUPPLY : 2205% V, AC Single Phase, 50 Htz, 1 H.P.
Slide 38
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
PAPER ELECTRIC INCINERATOR/ ASH INCINERATOR (RMPL- 1010) The unit
consists of a silicate tube surrounded by the heating element
enclosed in an asbestos lined metal cylinder. It is mounted on a
stand with an adjustable holder, with flex, plug and socket.
Maximum temperature 900 0 C reached in one hour. The apparatus is
lacquered and the machined parts are nickeled and chromium plated.
Power supply: 220 V AC. Single Phase Power consumption: 180-200
Watts. OPTIONS Thermostatic Temperature Control Temperature
measuring device. Replacement of Heating Elements Changes: RMPL
products undergo continuous development. The technical data in this
catalogue are therefore subject to change
Slide 39
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
Electronic Box Compression Tester (RMPL-3001) This heavy duty
(micro controller based) Tester is used to quantitatively measure
the strength of a corrugated cardboard box, used for movement of
goods, against the load which acts on it when it is piled
underneath when many containers are put one over the other, etc.
Compression strength is detected by means of a load cell and the
test process up to breaking of container. Having over travel
protection, peak & hold facility, automatic or normal zero
setting, variable speed, printer & computer interfacing
facility. SPECIFICATIONS: - Load Range : 2000,1000, 500, 250kgf
Sample dimension: 120 x 120 x 150 (stroke)cm.(MAX.) Compression
Speed: 1~100mm/min. & 13mm/min. (An exclusive switch is
equipped for 13mm/min. speed) Electric Source : AC 1-00V 1-P 15A
50/60Hz.
Slide 40
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
HAND SHEET FORMERS (RMPL 2005) Sheet Size: 165 mm dia = 214 cm2
area Trimmed Size: 200 cm2 Wire Screen (upper): 100 mesh (ASTM
std.) 150 mesh (TAPPI std.) Wire Screen (support): 20 mesh Suction
Height: 800 mm. Stock Container and dewatering vessel Stainless
Steel Drainage Time: 3.8 0.2 sec., 20 0C 1 0C. Standard
Accessories: Stirrer, Couch Roll, Couch Plate, 16 Nos. SS Drying
Disks Mirror polished one side, 17 Nos. Thermosetting Plastic
Drying stackable perforated rings to allow conditioned air to flow
through.
Slide 41
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
CONSISTENCY DETERMINATION APPARATUS(RMPL 2004) CONSISTENCY
DETERMINATION APPARATUS (RMPL-2004) SPECIFICATIONS Capacity: 1
litre Container: Top easily removable. Clamping: Rapid action &
efficient. Grid Plate: Fitted with a supporting lattice to
facilitate removal of the pulp mat from the wire. OPTIONS Vacuum
Pump. Rapid Sheet Drier for shortening the drying time Beating
& Freeness Tester Changes: RMPL products undergo continuous
development. The technical data in this catalogue are therefore
subject to change
Slide 42
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
ELECTRONIC TENSILE TESTER (RMPL-1004) FEATURES : This bench
mounting electronic tensile tester was ergonomically designed to
provide a compact, low cost, functional unit which is quick and
easy to operate. It gives extremely high accuracy and yet is robust
enough for routine quality control testing. The twin column
designing permits all round access to the specimen and grips. The
load measurement system utilizes a four figure peak-picking digital
voltmeter which displays maximum load until reset. The use of
digital readout for load and extension eliminates the high risk of
error involved when interpolating from graphs, kills and scales.
CROSS HEAD LIMIT TRIPS : An adjustable upper limit setting map
enables users to pre-set specimen length and a lower fixed trip
prevents any crushed over-travel. SPECIMEN LENGTH Electronics
Tensile Tester has a total jaw separation of 400 mm. The actual
specimen length is infinitely variable from 20 to 350 mm by means
of a setting block, where on the crosshead will automatically stop
at the predetermined position. GRIP : 25 MM WIDTH.
Slide 43
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
DIGITAL BALANCE (RMPL-1002) Digital Balance is intended for
measuring the WEIGHT very rapidly and accurately. One can weight up
to 200 grams. By using this scale. Small Test Sample of paper,
board or other sheet materials is kept on the Basket for accurate
measurement of WEIGHT. Accordingly Digital Reading in grams is seen
on the screen provided for the same. STANDARD FEATURES Fast
Weighing Response Micro Processor Controller A C indication Check
Weighting Re-chargeable battery back-up Auto Power Off System Auto
Zero Tracking High Brightness LED Stability Indication
SPECIFICATIONS :- MODEL CAPACITY READABILITY PAN SIZE RMPL-1002A
200GM 10MG 110MM DIA RMPL-1002B 300GM 10MG 110 MM DIA RMPL-1002C
600GM 20MG 110MM DIA
Slide 44
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
ELCETRONIC TEARING RESISTANCE TESTER (RMPL 1007 A) MICRO CONTROLLER
BASED WITH STANDARD PENDULUM, AUTOMATIC CLACULATION THROUGH
MICROPROCESSOR AND PRESENTATION OF MEASURED VALUES.
Slide 45
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
DIGITAL BURSTING STRENGTH TESTER (RMPL 1009 D) MICROPROSESSOR BASED
Measuring results: Individual Bursting Strength. Compenstaing
busrting strenght values for diaphgram resistance Mean values.
Clamping: Pneumatic Pump flow rate: 95 5ml/min Measuring range:
0-2000 kPa or 20 kg/cm2. Accuracy 1% of readout values within 200 -
2000 kPa. The effect of the diaphragm must however be taken into
considerations. Display: 4-1/2 digits Specimen Clamp-Upper Part:
30.50 mm Specimen Clamp-Lower Part: 33.10 APPLICABLE STANDARDS ISO
2758, TAPPI T403, SCAN P24, APPITA/AS 1301.403, ASTM D774, CPPA
D.8, DIN 53141, FEFCO NO. 4, NF Q 03-053, JIS 8112
Slide 46
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
PH METER ( RMPL 5005 A ) Read Out : 3-1/2 Digits Resolving Power :
0.01 Ph 1 MV. Measuring Range : 0.14 Ph - 1999 1999 MV. Working
Condition : 50 0C < 85% pH. Power Source : AC 220 V 50 Hz. Power
Consumption : 50 W. Electrodes : Glass Combined Electrodes Over All
Dimension : 100 X 330 X 180 mm.
Slide 47
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
RESEARCH DIGESTER RMPL - 5009 The Digester is a complete pulping
unit for producing pulps by cooking wood chips in a manner similar
to a commercial digester. The unit is easy to operate and features
precise control of pulping variables to ensure good repeatability
of results. A sampling line with Cooling attachments allows liquor
samples to be withdrawn safely during The cooking process and a
control valve determines the circulation rate Of cooking chemicals.
Digester Volume: 20 Liters Max Pressure: 20kg/cm 2
Slide 48
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
RMPL 5010 (A) A PULPING UNIT RMPL 5010 (A) For Laboratory
production of chemical pulp. Provided with six autoclaves, pressure
tested, each of 2.5 dm 3 rotate in heated poly glycol bath and
suitable for 300/350gm bone-dry wood. Heating elements provided
with to stage heater capacity 7.5 kw each Digital temp.
Indicator-cum-controller precisely control the temperature range
50-250 0 C. Drum rotation approximate 3rpm, max. working pressure
15kg/cm2. Option:- Microprocessor based temperature
indicator-cum-controller with facility of more detailed
pre-programming of boiling sequence.
Slide 49
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
For Laboratory production of chemical pulp. Provided with six
autoclaves, pressure tested, each of 2.5 liter suitable for
300/350gm bone-dry wood rotate in forced hot air with precise
temperature control to monitor cooking behave of different raw
materials. The unit is easy to operate and boiling parameter
precisely controlled to insure good repeatability. The autoclave
bomb can be quickly cooled by using cold water spray on it after
completion of cycle. Digital temp-cum- controller precisely control
the temperature range upto- 200 0 C. The rotation with change in
turning direction provide efficient agitation to the samples.
PULPING UNIT RMPL 5010 (B) (Autoclave Digester with hot air Heating
System)
Slide 50
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
LAB DISC REFINER RMPL - 5011 For wet grinding and defibrating chips
or experimental pulp making. Utilized for developing pulping
processes and strength development studies on raw steamed or
chemically cooked chips, fully cooked pulp, cooked straw, waste
paper and many other materials. With motorized screw feeding
arrangements. Disc dia 304 mm, speed 1500 3000 rpm. Option Extra
Grinding Disc
Slide 51
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
FRACTIONATER SOMERVILLE TYPE RMPL- 5012 For determining the shieve
content in ground wood pulp. Designed in accordance with second
report of the pulp evaluation Committee to the Technical Section of
Paper Makers Association. Number of slots 756.width 0.15mm Rubber
diaphragm actuation by electric motor and eccentric mechanism,
driven at 690 700 rpm.
Slide 52
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@rediffmail.comwww.rajivpapermahcines.com
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
DIGITAL BRIGHTNESS AND OPACITY TESTER: ISO (TECHNIBRITE/ELREPHO
TYPE) RMPL-1016 DIGITAL BRIGHTNESS AND OPACITY TESTER
(TECHNIBRITE/ELREPHO TYPE) RMPL-1016 BRIGHTNESS and OPACITY TESTER
was developed to meet the paper industrys needs for accurate and
reliable measurement of BRIGHTNESS and OPACITY. Its design Conforms
to the international standard, ISO2469, 2470, 2471, SCAN- P3 &
P8, TAPPI 525, 534, 519, BSI 4432/ pt. 1,2,3, CAPPA E.1
SPECIFICATIONS :- Integrating spheres diameter 15 cm. Total area of
aperature in sphere- less than 7.5 % of the sphere area. Gloss Type
subtends half angel of 15.5 surrounding emerging sample beam Sample
aperature circular with 34 mm diameter. Sample area of view
circular with 30 mm diameter. Accepted reflected beams
perpendicular within 00 to 10 and confined to cones of 3.5 half
angles. Accuracy of ISO standards + 0.3%. Max Photometric Linearity
Error 0.1% Power Supply 230 + 5% volts, 50VA, 50 Hz. BRIGHTNESS: -
ISO Brightness is the reflectance of blue light (with an affective
wave length of 457nanometers) measured under carefully controlled
geometric, photometric conditions. OPACITY ISO Opacity, in
accordance with ISO standard 2471 measures with this meter
directly. R0 is obtained by measuring the reflectance of a single
sheet backed with a black material. R00 contained by measuring
single sheet backed by multiple sheets of the same material. ISO
opacity, which is the ratio R0 /R0c is automatically read out by
the instrument. Custom filter Selection provides accurate agreement
with the ISO 2471 spectral response function at effective
wavelength 557 nanometer.
Slide 53
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
MUFFLE FURNACE (RMPL-5002) MUFFLE FURNACE IS HAVING MULTI- PURPOSE
APPLICATION INCLUDING ASH TESTING. IT IS WIDELY ACCEPTED/APPROVED
INSTRUMENT FOR PAPER INDUSTRIES FOR TAKING VARIOUS TESTING. THE
LIFE / DURABILITY OF MUFFLE FURNACE IS 3 TIMES LONGER THAN ASH
TESTER. TECHNICAL SPECIFICATIONS: - Temp Range: 0 9000 C Size: 5 x
5 x 9 TECHNICAL SPECIFICATIONS: - Temp Range: 0 9000 C Size: 5 x 5
x 9
Slide 54
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
PAPER STRIP TRIMMER is intended for accurate cutting of sample
strips.SPECIFICATIONS:- Fitted with finger guard. Outer strip bar
with spaces rings adjustable of 10, 12.7 or 15 mm strip width.
Replaceable knife. Cutting length 360 mm Dimension : 60 x 30 x 20
cm.OPTIONS:- Other strip width and length 100 mm, 150 mm, 250 mm
and 300 mm. PAPER STRIP TRIMMER PAPER STRIP TRIMMER (RMPL-1008-B)
(RMPL-1008-B)
Slide 55
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]@rediffmail.com
www.rajivpapermahcines.com Changes: RMPL products undergo
continuous development. The technical data in this catalogue are
therefore subject to change. PAPER STRIP TRIMMER (RMPL-1005)
SPECIFICATIONS:- Fitted with finger guard. Outer strip bar with
spaces rings adjustable of 10, 12.7 or 15 mm strip width.
Replaceable knife. Cutting length 360 mm Dimension : 60 x 30 x 20
cm. OPTIONS:- Other strip width and length 100 mm, 150 mm, 250 mm
and 300 mm. PAPER STRIP TRIMMER is intended for accurate cutting of
sample strips.
Slide 56
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website:
www.rajivpapermahcines.comrajivpapermachines@[email protected]
www.rajivpapermahcines.com Changes: RMPL products undergo
continuous development. The technical data in this catalogue are
therefore subject to change. DIGITAL RING CRUSH TESTER (RMPL 5014)
The Ring Crush Test correlates with edgewise compression strength
of paper board. The compressive force is extended on a specimen
held in ring form in a special jig and placed between two platens
of a compression machine by causing the upper platen approach the
lower platen at a uniform speed until the specimen collapses
Features:- Measure & retain Peak Load Test result &
statistics are displayed on display window. Automatic zero setting.
Force measurement by Load cell. Measuring Results Breaking Force in
kfg & RCT in N/m. Technical Specification Deformation
Calibrated 12.0mm/min Speed. Measuring Range 0 5000N Accuracy 1% of
measured value Rupture Sensitivity 2 10% of the relevant maximum
load Specimen Holder Groove Depth 6.35mm.
Slide 57
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
DIGITAL PH ONDUCTIVITY & TEPM. METER(RMPL 5015) The instruments
is extremely useful for chemical laboratories, pollution &
environment testing, public health engg., sugar, cement, paper
industry, pharmaceuticals & boiler water analysis, agriculture
& soil labs, brewery & transport under taking, fertilizer
plants & petroleum refineries etc. Features:- Highly Stable
& Accurate Cell Constant Adjustment Facility 3 Digit Red LED
Display Rugged & Reliable Design Technical Specification
Digital Display : 3 Digit LED Power: : 220VAC 10% 50Hz Dimensions :
75 x 175 x 275mm. Weight : 2.5Kh. (aprx.) Conductivity Range : 0 to
20 mS/cm in 02 ranges Accuracy : 0.5% 1 digit Resolution : 1 s/cm.
Oscillator : 1 KHz in built Cell : 0.2 to 1.8 adjustable directly
on digital display
Slide 58
FOR MORE COMPREHENSIVE DETAILS ABOUT LAB INSTRUMENTS OR ANY
OTHER PAPER MILL INSTRUMENT, FEEL FREE TO CONTACT US AT: M/S. RAJIV
MACHINES(P) LTD. Street no. 6, Main Gate, Punjab Expeller Compound,
Meerut Road, Ghaziabad-201001, U. P. (India) Tel.: +91-120 -
2720117, 2781815, 2702079 &. Telefax:+91-120- 2720449 &
4155652 Email: [email protected],
[email protected] Website: www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
Electrical box compression tester (RMPL 3001) This heavy duty
(Micro controller based) tester is used to measure the strength of
a corrugated cardboard box used for movement of goods against the
load which acts on it is piled underneath when many containers are
put on over the other. Compression Strength is detected by means of
a load cell. Technical Specification Load Range2000, 1000, 500,
250kgf. Sample Dimensions120 x 120 x 150 (stroke) Compression
Speed1 100mm/min. & 13mm per min. an exclusive switch is
equipped for 13mm. / min. speed) Electric sourceAC 1 00V 1-P 15 A
50 / 6 Hz
Slide 59
Bomb Calorimeter (RMPL 5016) FOR MORE COMPREHENSIVE DETAILS
ABOUT LAB INSTRUMENTS OR ANY OTHER PAPER MILL INSTRUMENT, FEEL FREE
TO CONTACT US AT: M/S. RAJIV MACHINES(P) LTD. Street no. 6, Main
Gate, Punjab Expeller Compound, Meerut Road, Ghaziabad-201001, U.
P. (India) Tel.: +91-120 - 2720117, 2781815, 2702079 &.
Telefax:+91-120- 2720449 & 4155652 Email:
[email protected], [email protected] Website:
www.rajivpapermahcines.com
[email protected]
Changes: RMPL products undergo continuous development. The
technical data in this catalogue are therefore subject to change.
-Used for determination of combution of heat of calorific value of
the fuel & other organic material. - Designed as per
specification of Institute of Petrolium BS 1016 standard IS No.
1350/1966 -Supplied complete with water jacket made of Brass/S.
Steel Sheet duly nickled Chrimium plated with Bakelite Lid. -S.
Steel Bomb, Bomb Jacket, Water Calorimeter Circulation -Briquit,
Pellet Press heavy duty. -Spanners magnified glass with nickled
nichrome wire & cotton reel -Gas Releasing Valve, S. Steel
crucible -Benzoic acid with known calorific value -Full featured
Digital Controller & Safety device & Temp. Sensor
Applications:- - Petroleum Industries / Coal Industries /
Educational Institute & Research lab. Technical Parameters:-
-Power Consumption: 220/230V AC Supply Phase 10% 50Hz -Duty Cycle:
continiuos -Optional: Oxygen Cylinder, Remote Control for firing,
Calibration of Bomb from Govt. Approval Lab. With
certification