© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-68772 Pira © Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 15 Pira
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
Piranha™ Punches & DiesDimensions and SpecificationsBelow are our standard Piranha™ punches and dies. Refer to ourCross Reference Catalog for the proper tooling to fit your machine.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!*MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
F-16IN STOCK
F-26IN STOCK
F-55IN STOCK
F-62IN STOCK
PIRANHA™ HEAVY DUTY PUNCHES*
330406
C-4B
PW-7
C-4D
4433408
2
2-1/2
2-1/2
2-1/2
N/A
12
10
12
10
12
2-5/16
2-7/8
2-7/8
2-7/8
2-5/8
1-3/8
2
1-7/8
2
1-7/8
1-5/64
1.537
1.570
1.570
1.570
1-3/8
1-5/8
1-5/8
1-5/8
1-3/8
16
26
COUPLINGNUT
NUMBER
OLDCOUPLING
NUTNUMBER
HEXAGONSIZE
THREADSPER INCH
LARGEST O.D.
THREAD DIAMETER
BORE LENGTHUSE WITH
PUNCHFIGURE
NUMBER
CN-56
CN-26
CN-26A
CN-26B
CN-26P
The following tables list our stock Piranha™ Coupling Nuts. Made to order coupling nuts can beshipped in as little as 24 hours. Refer to our Cross Reference Catalog for stock punches & diesand recommended manufactures’ tooling.
26 with 1-9/16point size
Bolt On Style
Threaded Style
When unique products call for specialized punches or multiple-punch operations, you can rely on us for the right tools. Withyour specifications and criteria on hand, our staff engineers canapply the unique experience and skills required to meet thesenon-standard requests. Nationally, customers turn to us at thevery onset of product development to gain important insight thatmay help eliminate problems in production. Here, state-of-the-arttechnology guides computer-aided processes to build highlyaccurate tools plus ensure the rapid turnaround you require.
This catalog is the property ofThe Cleveland Punch & Die
Company. All rights reserved.Reproduction of any part of
this catalog without theexpressed written consent
of The Cleveland Punch& Die Company isstrictly prohibited.
COPYRIGHT©2005Cleveland Punch & Die Co.
666 Pratt Street, Box 769Ravenna, Ohio 44266
1-800-451-4342Fax 1-800-451-6877
All Rights Reserved.
ReturnsReturned tooling will not be accepted without prior authorization. No credit issued on used ordamaged tooling. Special tooling can not be returned. Returned tooling must be shipped prepaid.Restocking charge is 25% of list price.
ShortagesAll claims must be made within ten days of invoice date.
TermsF.O.B. Ravenna, OhioNet 30 days
26 with 1-9/16point size
26 with 1-9/16point size
THE
CLEVELANDPUNCH & DIE COMPANY
Established 1880
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 3 Pira© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-687714 Pira
The following tables list ourstock round punches and diesfor Piranha™ Ironworkers.Refer to our Cross ReferenceCatalog for the proper tooling tofit your machine.
1/85/323/167/321/49/325/1611/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/81-5/321-3/161-7/321-1/41-9/321-5/161-11/321-3/81-13/321-7/161-15/321-1/21-17/321-9/16
Size 16 26
STOCKROUND PUNCHES
FIGURE NUMBER
Represents stock round sizes
STOCKROUND DIES
FIGURE NUMBER
5/323/167/321/49/325/1611/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/81-5/321-3/161-7/321-1/41-9/321-5/161-11/321-3/81-13/321-7/161-15/321-1/21-17/321-9/161-19/321-5/8
Size 55 62
UPPER ANGLE BLADELONG SHEAR BLADE2 Required
SHORT SHEAR BLADE2 Required
LOWER ANGLE BLADE2 Required
Model No. P-36
P-50
(P-3
)
RP-5
0
P-70
P-90
P-12
0
PII-3
5
PII-6
5
PII-8
8
PII-1
10
PII-1
40
Short Shear Blade 2 Required
Long Shear Blade 2 Required
Upper Angle
Lower Angle 2 Required
UPPER COPER
LOWER COPER-FRONT
LOWER COPER-SIDE2 Required
N/A
Model No. P-36
P-50
(P-3
)
RP-5
0
P-70
P-90
P-12
0
PII-3
5
PII-6
5
PII-8
8
PII-1
10
PII-1
40
Upper Coper
Lower Coper Front
Lower Coper Side 2 Required
GREEN TEAM TIP:Punches last longer when used with
a punch lubricant. For maximum punch life, use Cleveland Punch & Die’s patented punch lubricant -
Punch Easy.
OSHA WARNINGIt is the user’s responsibility
that the machine and toolingbe set up and used in accor-dance with local and nationalOSHA Laws and ANSI B11.5
standards for safety.Do not permit unqualified
personnel to setup or operatethe machine. Extreme careshould be used at all times.
PLEASE NOTE:We stock 1/32” & 1/16”clearance die sizes.Other made to order diesizes such as clearancesrecommended for gaugestock, can be shipped in as little as 24 hours.
FOR A-36 AND MILD STEEL PLATE:1/4” up to 1/2”1/2” up to 3/4”3/4” up to 1”1” and over
1/32” clearance1/16” clearance3/32” clearance1/8” clearance
GREEN TEAM TIP:Good results are obtained byusing the following chart to
determine die clearance.
Piranha™ Shear/Angle Blades & CopersThe following table lists our stock Piranha™ shear blades, angle bladesand copers. Please provide the model and serial number when orderingreplacement blades. If the blade required is not listed, kindly furnish apart number, sketch or drawing.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
Represents stock parts
Represents stock parts
N/A N/A
THE
CLEVELANDPUNCH & DIE COMPANY
Established 1880
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-68774 Pira © Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 13 Pira
16
26
16 26FIGURE NUMBER
Size
3/16 x 3/4
3/16 x 1
7/32 x 7/16
7/32 x 1
1/4 x 1/2
1/4 x 3/4
1/4 x 1
9/32 x 9/16
9/32 x 3/4
9/32 x 1
5/16 x 1/2
5/16 x 5/8
5/16 x 3/4
5/16 x 1
5/16 x 1-1/16
5/16 x 1-1/4
5/16 x 1-1/2
11/32 x 11/16
11/32 x 1
3/8 x 1/2
3/8 x 3/4
3/8 x 1
3/8 x 1-1/4
3/8 x 1-1/2
13/32 x 13/16
13/32 x 1
13/32 x 1-1/4
Size
7/16 x 9/16
7/16 x 3/4
7/16 x 7/8
7/16 x 1
7/16 x 1-1/16
7/16 x 1-1/4
7/16 x 1-1/2
15/32 x 1
1/2 x 3/4
1/2 x 1
1/2 x 1-1/16
1/2 x 1-1/4
1/2 x 1-1/2
17/32 x 1
17/32 x 1-1/4
17/32 x 1-1/2
9/16 x 3/4
9/16 x 1
9/16 x 1-1/16
9/16 x 1-1/8
9/16 x 1-1/4
9/16 x 1-1/2
5/8 x 1
5/8 x 1-1/4
5/8 x 1-1/2
11/16 x 1
11/16 x 1-1/16
The following tables list our stock oblong punches and dies for Piranha™Ironworkers. Refer to our Cross Reference Catalog for the proper toolingto fit your machine.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
16 26 Size
11/16 x 1-1/8
11/16 x 1-1/4
11/16 x 1-1/2
3/4 x 1
3/4 x 1-1/4
3/4 x 1-1/2
13/16 x 1
13/16 x 1-1/16
13/16 x 1-1/8
13/16 x 1-1/4
13/16 x 1-1/2
7/8 x 1-1/4
7/8 x 1-1/2
15/16 x 1-1/16
15/16 x 1-1/8
15/16 x 1-1/4
15/16 x 1-1/2
15/16 x 1-9/16
1 x 1-1/4
1 x 1-1/2
1 x 1-9/16
1-1/16 x 1-1/4
1-1/16 x 1-5/16
1-1/16 x 1-1/2
1-1/16 x 1-9/16
1-1/8 x 1-1/2
V-Groove in Head of PunchOblong punches are stocked without v-groove inthe head. V-Groove can be furnished on request.
FIGURE NUMBER FIGURE NUMBER
Represents stock oblong sizes
V-GROOVE
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
PUNCH STEMS
URETHANE STRIPPERS
DIE HOLDER
FILTER ELEMENT
Model No. P-36
P-50
(P-3
)
RP-5
0
P-70
P-90
P-12
0
PII-3
5
PII-6
5
PII-8
8
PII-1
10
PII-1
40
SEPP
-35
SEPP
-65
SEPP
-88
SEPP
-120
SEPP
-140
Urethane Stripper
Punch Stem
Die Holder
Coupling Nut
Filter Element
N/A N/A N/A N/A N/A N/A N/A N/AN/AN/A
Piranha™ Punch Stems,Coupling Nuts andMiscellaneous PartsThe following table lists our stock Piranha™punch stems, coupling nuts, die holders, urethane strippers and filter elements.Please provide the model and serial numberwhen ordering replacement parts. If the partrequired is not listed, kindly furnish a partnumber, sketch or drawing.
PIRANHA™
CN-26A Coupling NutIN STOCK
PIRANHA™
CN-56 Coupling NutIN STOCK
PIRANHA™
CN-26P Coupling NutIN STOCK
GREEN TEAM TIP:Punch sizes larger than body diameter
may require special coupling nut.
Represents stock parts
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
*MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
*MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
THE
CLEVELANDPUNCH & DIE COMPANY
Established 1880
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-68776 Pira © Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 11 Pira
55 62
STOCKSQUARE
PUNCHESFIGURE NUMBER
Size7/321/49/325/1611/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/8
16 26
STOCKSQUARE
DIESFIGURE NUMBER
Represents stock square sizes
V-Groove in Head of Punch,Whistle Notch Locators on DieSquare and hexagon punches are stocked withoutv-groove in the heads. Dies are stocked withoutlocators. They can be furnished on request.
55 62
STOCKHEXAGONPUNCHES
FIGURE NUMBER
16 26
STOCKHEXAGON
DIESFIGURE NUMBER
Hexagon punch and die sizesare measured from flat to flat.
Size11/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/81-5/321-3/161-7/321-1/41-9/321-5/16
Represents stock hexagon sizes
The following tables list our stock square and hexagon punches anddies for Piranha™ Ironworkers. Refer to our Cross Reference Catalogfor the proper tooling to fit your machine.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
GREEN TEAM TIP:Punch sizes larger than body diameter may require special coupling nut.
F-2823*F-2822*F-2820* F-2821*
F-2825*F-2824*
F-2830* F-2831* F-2832*
F-2834* F-2835*
28XX tooling is rated at amaximum of 50 tons.
Sizes .062 to 1.000
Sizes 4.001 to 5.000Sizes 3.001 to 4.000
Sizes 2.001 to 3.000Sizes 1.438 to 2.000Sizes 1.001 to 1.437
F-2833*
SAFETY WARNING!!!Do not use an offset die if you cannot adjust your die holder.
Size13/32 x 25/3213/32 x 1-1/3215/32 x 25/3215/32 x 1-1/3217/32 x 1-1/3219/32 x 25/3219/32 x 1-1/3223/32 x 1-1/3227/32 x 1-1/32
STOCK OBLONG OFFSET DIESSTYLE 128B
FIGURE NUMBER
The Style 128 Offset dies are manufactured with a minimumwall thickness (slug hole wall to die outside diameter) of 1/4“ to ensure the strength of the die. Stock round and oblongStyle 128 offset dies are furnished without locators. Locators can be furnished on request.
55 62
STYLE 128 OFFSET FLAT TOP (ECCENTRIC) DIES
POSITION ”B“IN STOCK
POSITION ”A“
Represents stock oblong sizes
Size9/325/1611/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/8
55 62
STOCK ROUND OFFSET DIESSTYLE 128
FIGURE NUMBERRepresents stock round sizes
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
The following table lists our stock offset dies-Style 128 for PiranhaIronworkers. Refer to our Cross Reference Catalog for the propertooling to fit your machine.
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-687710 Pira © Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 7 Pira
F-2803IN STOCK
F-2802IN STOCK
F-2800IN STOCK
F-2801IN STOCK
F-2805IN STOCK
F-2804IN STOCK
F-2810IN STOCK
F-2811IN STOCK
F-2812IN STOCK
F-2813IN STOCK
F-2814IN STOCK
F-2815IN STOCK
Sizes .062 to 1.000
Sizes 4.001 to 5.000Sizes 3.001 to 4.000
Sizes 2.001 to 3.000Sizes 1.438 to 2.000Sizes 1.001 to 1.437
Dimensions & SpecificationsThese pages illustrate our 28XX round and shaped punches and diesfor Piranha™ Ironworkers oversize punching attachments. Refer to ourCross Reference Catalog for the proper tooling to fit your machine.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
All punches, tip (point)sizes greater than 1-7/16“are provided with a housetop shear and center point.Other shear types areavailable. For assistance,please contact one of ourGreen Team CustomerService representatives.
MachineP-36P-50P-70P-90PII-35PII-65PII-88PII-110PII-140SEPP-35SEPP-65SEPP-85SEPP-120SEPP-140
PIRANHA 28XX OVERSIZEATTACHMENTS
3-3/4
PIRANHA 28XX OVERSIZEATTACHMENTS
5-3/4
HEXAGON
SQUARE
OBLONG
SPECIAL PURPOSE IRONWORKER DIES are made to order and conform in everyrespect to the high quality of our standard dies. Style 129 and Style 241 offsetdies, are manufactured with a minimum wall thickness (slug hole wall to dieoutside diameter) of 1/4“ to ensure the strength of the die.
SAFETY WARNING!!!Do not use an offset die if youcannot adjust your die holder.
PLAIN BEVELSMOOTH TOP DIESare non-marring diesdesigned especially foruse in punching structuralshapes such as “I” beams,channels and angle iron.Plain bevel smooth dies arerecommended where thematerial punched is angledor does not have a uniformthickness.
SAWTOOTHTOP DIESperform the same functionas our plain bevel smoothtop dies. Sawtooth dies arerecommended where thereis a tendency for the mate-rial to slip during punching.The serrated top surfacewill grab the material moresecurely and help hold it inplace during the punchingoperation.
Most large structural shapes have astandard angle. All our bevel dies matchthis angle to ensure that the hole will beperpendicular to the outside surface.
POSITION ”A“ POSITION ”B“
POSITION ”A“ POSITION ”B“
POSITION ”A“ POSITION ”B“
PARALLEL TO BEVEL
PERPENDICULAR TOBEVEL
THE
CLEVELANDPUNCH & DIE COMPANY
Established 1880
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-68778 Pira © Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 9 Pira
PLEASE NOTE: Standard 28XX punch holders have a 50 ton maximum punching capacity. Heavy duty punchesmust be used when punching applications exceed 50 tons. 28XX punch attachments are furnished without strippers.Contact CPD’s engineering department for heavy duty conversions and custom stripper designs.
P-50 1-1/2” OVERSIZE ATTACHMENTS ARE IN STOCKAND CAN BE SHIPPED THE SAME DAY ORDERED!
P-50 1-1/2” OVERSIZE ATTACHMENTS USEF-26 PUNCHES AND F-62 DIES.
PII-65/88 28XXPunch Holder
IN STOCK
PII-110/140 28XXPunch Holder
IN STOCK
28XX 3-3/4Die HolderIN STOCK
28XX 5-3/4Die HolderIN STOCK
P-50/70/90 28XXPunch Holder
IN STOCK
PIRANHA™ P-50 1-1/2”Oversize Attachment
IN STOCK
Represents stock attachments(28XX punch & die holder)
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
SAFETY WARNING!!!Do not use an offset die if you cannot adjust your die holder.
Size13/32 x 25/3213/32 x 1-1/3215/32 x 25/3215/32 x 1-1/3217/32 x 1-1/3219/32 x 25/3219/32 x 1-1/3223/32 x 1-1/3227/32 x 1-1/32
STOCK OBLONG OFFSET DIESSTYLE 128B
FIGURE NUMBER
The Style 128 Offset dies are manufactured with a minimumwall thickness (slug hole wall to die outside diameter) of 1/4“ to ensure the strength of the die. Stock round and oblongStyle 128 offset dies are furnished without locators. Locators can be furnished on request.
55 62
STYLE 128 OFFSET FLAT TOP (ECCENTRIC) DIES
POSITION ”B“IN STOCK
POSITION ”A“
Represents stock oblong sizes
Size9/325/1611/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/8
55 62
STOCK ROUND OFFSET DIESSTYLE 128
FIGURE NUMBERRepresents stock round sizes
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
The following table lists our stock offset dies-Style 128 for PiranhaIronworkers. Refer to our Cross Reference Catalog for the propertooling to fit your machine.
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-687710 Pira © Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 7 Pira
F-2803IN STOCK
F-2802IN STOCK
F-2800IN STOCK
F-2801IN STOCK
F-2805IN STOCK
F-2804IN STOCK
F-2810IN STOCK
F-2811IN STOCK
F-2812IN STOCK
F-2813IN STOCK
F-2814IN STOCK
F-2815IN STOCK
Sizes .062 to 1.000
Sizes 4.001 to 5.000Sizes 3.001 to 4.000
Sizes 2.001 to 3.000Sizes 1.438 to 2.000Sizes 1.001 to 1.437
Dimensions & SpecificationsThese pages illustrate our 28XX round and shaped punches and diesfor Piranha™ Ironworkers oversize punching attachments. Refer to ourCross Reference Catalog for the proper tooling to fit your machine.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
All punches, tip (point)sizes greater than 1-7/16“are provided with a housetop shear and center point.Other shear types areavailable. For assistance,please contact one of ourGreen Team CustomerService representatives.
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 5 Pira© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-687712 Pira
THE
CLEVELANDPUNCH & DIE COMPANY
Established 1880
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FIGURE NUMBER FIGURE NUMBER
Represents stock oblong sizes
55 62Size7/32 x 25/32
7/32 x 1-1/32
15/64 x 29/64
1/4 x 15/32
1/4 x 1-1/32
9/32 x 17/32
9/32 x 25/32
9/32 x 1-1/32
5/16 x 19/32
5/16 x 25/32
5/16 x 1-1/32
11/32 x 17/32
11/32 x 21/32
11/32 x 25/32
11/32 x 1-1/32
11/32 x 1-3/32
11/32 x 1-9/32
11/32 x 1-17/32
3/8 x 23/32
3/8 x 1-1/32
3/8 x 1-5/16
13/32 x 17/32
13/32 x 25/32
13/32 x 1-1/32
13/32 x 1-9/32
13/32 x 1-17/32
7/16 x 27/32
7/16 x 1-1/32
7/16 x 1-9/32
7/16 x 1-5/16
15/32 x 19/32
Size15/32 x 25/32
15/32 x 29/32
15/32 x 1-1/32
15/32 x 1-3/32
15/32 x 1-9/32
15/32 x 1-17/32
1/2 x 1-1/32
1/2 x 1-1/16
1/2 x 1-5/16
17/32 x 25/32
17/32 x 1-1/32
17/32 x 1-3/32
17/32 x 1-9/32
17/32 x 1-17/32
9/16 x 13/16
9/16 x 1-1/32
9/16 x 1-1/16
9/16 x 1-1/8
9/16 x 1-3/16
9/16 x 1-9/32
9/16 x 1-5/16
9/16 x 1-17/32
9/16 x 1-9/16
19/32 x 25/32
19/32 x 1-1/32
19/32 x 1-3/32
19/32 x 1-5/32
19/32 x 1-9/32
19/32 x 1-17/32
5/8 x 13/16
5/8 x 1-1/16
5/8 x 1-1/8
Size5/8 x 1-3/16
5/8 x 1-5/16
5/8 x 1-9/16
21/32 x 1-1/32
21/32 x 1-9/32
21/32 x 1-17/32
11/16 x 1-1/16
11/16 x 1-5/16
11/16 x 1-9/16
23/32 x 1-1/32
23/32 x 1-3/32
23/32 x 1-5/32
23/32 x 1-9/32
23/32 x 1-17/32
3/4 x 1-1/16
3/4 x 1-1/8
3/4 x 1-3/16
3/4 x 1-5/16
3/4 x 1-9/16
25/32 x 1-1/32
25/32 x 1-9/32
25/32 x 1-17/32
13/16 x 1-1/16
13/16 x 1-5/16
13/16 x 1-9/16
27/32 x 1-1/32
27/32 x 1-3/32
27/32 x 1-5/32
27/32 x 1-9/32
27/32 x 1-17/32
7/8 x 1-1/16
7/8 x 1-1/8
Size7/8 x 1-3/16
7/8 x 1-5/16
7/8 x 1-9/16
29/32 x 1-9/32
29/32 x 1-17/32
15/16 x 1-5/16
15/16 x 1-9/16
31/32 x 1-3/32
31/32 x 1-5/32
31/32 x 1-9/32
31/32 x 1-17/32
1 x 1-1/8
1 x 1-3/16
1 x 1-5/16
1 x 1-9/16
1 x 1-5/8
1-1/32 x 1-9/32
1-1/32 x 1-17/32
1-1/32 x 1-19/32
1-1/16 x 1-5/16
1-1/16 x 1-9/16
1-1/16 x 1-5/8
1-3/32 x 1-9/32
1-3/32 x 1-11/32
1-3/32 x 1-17/32
1-1/8 x 1-5/16
1-1/8 x 1-3/8
1-1/8 x 1-9/16
1-1/8 x 1-5/8
1-5/32 x 1-17/32
1-3/16 x 1-9/16
55 6255 6255 62FIGURE NUMBER FIGURE NUMBER FIGURE NUMBER FIGURE NUMBER
Oblong dies are stocked without locators.Locators can be furnished on request.
Size F-2800 F-2801 F-2802 F-2803 F-2804 F-2805 Size F-2810 F-2811 F-2812 F-2813 F-2814 F-2815FIGURE NUMBER
1/45/163/87/161/29/165/811/163/413/167/811-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-9/161-5/81-11/161-3/41-13/161-7/81-15/1622-1/82-1/42-3/82-1/22-5/82-3/42-7/833-1/43-1/23-3/444-1/2
The following table lists our stock round 28XX punches and dies forPiranha™ Ironworkers oversize hole punching attachments. Refer to ourCross Reference Catalog for the proper tooling to fit your machine.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
9/3211/3213/3215/3217/3219/3221/3223/3225/3227/3229/321-1/321-3/321-5/321-7/321-9/321-11/321-13/321-15/321-17/321-19/321-21/321-23/321-25/321-27/321-29/321-31/322-1/322-5/322-9/322-13/322-17/322-21/322-25/322-29/323-1/323-9/323-17/323-25/324-1/324-17/32
STOCK ROUND28XX PUNCHES
Represents stock round sizes
FIGURE NUMBER
STOCK ROUND28XX DIES
Represents stock round sizes
THE
CLEVELANDPUNCH & DIE COMPANY
Established 1880
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 3 Pira© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-687714 Pira
The following tables list ourstock round punches and diesfor Piranha™ Ironworkers.Refer to our Cross ReferenceCatalog for the proper tooling tofit your machine.
1/85/323/167/321/49/325/1611/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/81-5/321-3/161-7/321-1/41-9/321-5/161-11/321-3/81-13/321-7/161-15/321-1/21-17/321-9/16
Size 16 26
STOCKROUND PUNCHES
FIGURE NUMBER
Represents stock round sizes
STOCKROUND DIES
FIGURE NUMBER
5/323/167/321/49/325/1611/323/813/327/1615/321/217/329/1619/325/821/3211/1623/323/425/3213/1627/327/829/3215/1631/3211-1/321-1/161-3/321-1/81-5/321-3/161-7/321-1/41-9/321-5/161-11/321-3/81-13/321-7/161-15/321-1/21-17/321-9/161-19/321-5/8
Size 55 62
UPPER ANGLE BLADELONG SHEAR BLADE2 Required
SHORT SHEAR BLADE2 Required
LOWER ANGLE BLADE2 Required
Model No. P-36
P-50
(P-3
)
RP-5
0
P-70
P-90
P-12
0
PII-3
5
PII-6
5
PII-8
8
PII-1
10
PII-1
40
Short Shear Blade 2 Required
Long Shear Blade 2 Required
Upper Angle
Lower Angle 2 Required
UPPER COPER
LOWER COPER-FRONT
LOWER COPER-SIDE2 Required
N/A
Model No. P-36
P-50
(P-3
)
RP-5
0
P-70
P-90
P-12
0
PII-3
5
PII-6
5
PII-8
8
PII-1
10
PII-1
40
Upper Coper
Lower Coper Front
Lower Coper Side 2 Required
GREEN TEAM TIP:Punches last longer when used with
a punch lubricant. For maximum punch life, use Cleveland Punch & Die’s patented punch lubricant -
Punch Easy.
OSHA WARNINGIt is the user’s responsibility
that the machine and toolingbe set up and used in accor-dance with local and nationalOSHA Laws and ANSI B11.5
standards for safety.Do not permit unqualified
personnel to setup or operatethe machine. Extreme careshould be used at all times.
PLEASE NOTE:We stock 1/32” & 1/16”clearance die sizes.Other made to order diesizes such as clearancesrecommended for gaugestock, can be shipped in as little as 24 hours.
FOR A-36 AND MILD STEEL PLATE:1/4” up to 1/2”1/2” up to 3/4”3/4” up to 1”1” and over
1/32” clearance1/16” clearance3/32” clearance1/8” clearance
GREEN TEAM TIP:Good results are obtained byusing the following chart to
determine die clearance.
Piranha™ Shear/Angle Blades & CopersThe following table lists our stock Piranha™ shear blades, angle bladesand copers. Please provide the model and serial number when orderingreplacement blades. If the blade required is not listed, kindly furnish apart number, sketch or drawing.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
Represents stock parts
Represents stock parts
N/A N/A
© Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 • 1-800-451-4342 • Fax 1-800-451-68772 Pira © Cleveland Punch & Die Company • 666 Pratt Street, Box 769 • Ravenna, Ohio 44266 15 Pira
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
FOR MORE HOLES PER DOLLAR CALL
1•800•451•4342FAX 1•800•451•6877www.clevelandpunch.com
MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
Piranha™ Punches & DiesDimensions and SpecificationsBelow are our standard Piranha™ punches and dies. Refer to ourCross Reference Catalog for the proper tooling to fit your machine.
STOCK PUNCHES & DIES ARE SHIPPED THE SAME DAY ORDERED!*MADE TO ORDER SIZES CAN BE SHIPPED IN AS LITTLE AS 24 HOURS!
F-16IN STOCK
F-26IN STOCK
F-55IN STOCK
F-62IN STOCK
PIRANHA™ HEAVY DUTY PUNCHES*
330406
C-4B
PW-7
C-4D
4433408
2
2-1/2
2-1/2
2-1/2
N/A
12
10
12
10
12
2-5/16
2-7/8
2-7/8
2-7/8
2-5/8
1-3/8
2
1-7/8
2
1-7/8
1-5/64
1.537
1.570
1.570
1.570
1-3/8
1-5/8
1-5/8
1-5/8
1-3/8
16
26
COUPLINGNUT
NUMBER
OLDCOUPLING
NUTNUMBER
HEXAGONSIZE
THREADSPER INCH
LARGEST O.D.
THREAD DIAMETER
BORE LENGTHUSE WITH
PUNCHFIGURE
NUMBER
CN-56
CN-26
CN-26A
CN-26B
CN-26P
The following tables list our stock Piranha™ Coupling Nuts. Made to order coupling nuts can beshipped in as little as 24 hours. Refer to our Cross Reference Catalog for stock punches & diesand recommended manufactures’ tooling.
26 with 1-9/16point size
Bolt On Style
Threaded Style
When unique products call for specialized punches or multiple-punch operations, you can rely on us for the right tools. Withyour specifications and criteria on hand, our staff engineers canapply the unique experience and skills required to meet thesenon-standard requests. Nationally, customers turn to us at thevery onset of product development to gain important insight thatmay help eliminate problems in production. Here, state-of-the-arttechnology guides computer-aided processes to build highlyaccurate tools plus ensure the rapid turnaround you require.
This catalog is the property ofThe Cleveland Punch & Die
Company. All rights reserved.Reproduction of any part of
this catalog without theexpressed written consent
of The Cleveland Punch& Die Company isstrictly prohibited.
COPYRIGHT©2005Cleveland Punch & Die Co.
666 Pratt Street, Box 769Ravenna, Ohio 44266
1-800-451-4342Fax 1-800-451-6877
All Rights Reserved.
ReturnsReturned tooling will not be accepted without prior authorization. No credit issued on used ordamaged tooling. Special tooling can not be returned. Returned tooling must be shipped prepaid.Restocking charge is 25% of list price.
ShortagesAll claims must be made within ten days of invoice date.
TermsF.O.B. Ravenna, OhioNet 30 days
26 with 1-9/16point size
26 with 1-9/16point size