05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 1
For saleCNC VERTIKAL TURNING CENTER
• New – immediately available!
• 3 000 mm swing diameter, table Ø 2 500 mm
• Driven tools, C-Axis (table)
• Heavy Duty
• Unique immediately-discount
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 2
The Wysshus engineering sells fresh from the factory a Heavy Duty CNC vertical turning center from the manufacturer Honor Seiki in the exclusive customer order.
The machine is sold due to a strategic reorganization of the production from a Swiss enterprise and can be supplied at short notice.
Equipped with various options and standard accessories, the machine is stored original-packed in a dry hall in Switzerland.
! Machine fresh from the factoryis offered with significant Discount by the ex-factory price!
Contact: Markus Havrda+41 79347 43 [email protected]
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 3
Honor Seiki VL – 250 CMHeavy Duty Series• New machine
• Various accessories
• Available immediately
• Selling price clearly under current cost price
• Instalation, acceptens test and functional check by Swiss technical personnel of the machine reseller of Honor Seiki
Links:• www.honorseiki.com.tw• www.steinermachine.ch
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 4
Honor Seiki VL – 250 CMHeavy Duty Series
• Max. turning diameter 2 970mm
• Max. turning height 1 600 mm
• Table diameter 2 500 mm, 15 000 kg max. workpiece weight
• Table speed max. 160 min-1, C-Axis
• Power 60 / 75 kW (Cont./30min), 2-step
• X-Axis travel -300 + 1 650 mm
• Z-Axis travel 1 200 mm / RAM 250 x 250 mm
• W-Axis cross-rail travel 1 000 mm (4 x 250 mm) with clamping
• Rapid rate 10 000 mm/min
• Flat ways and central lubrication in all axis
• Control: Fanuc 0i-TD
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 5
Honor Seiki VL – 250 CMHeavy Duty Series
• M-Type ATC with 16 stations• 10 turning + 6 milling
• Live tool spindel (driven tools)• speed 50 - 2 250 min-1
• power 11 / 15 kW, (Cont./30min), • Solid-lok System at the RAM• 10 pieces Solid-lok System, tool holder base• 1 piece Stück Solid Lok System Adapter for live tools
• Tool holder• 2 pieces OD/facing tool IDF32-200-200• 2 pieces ID tool IFL 25-120-250• 2 pieces boring tool BOS50-130-150
(Further tool holders and angle heads can be ordered additionally)
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 6
Info:Cross section RAM ◻250 mm
ATC:Stationes 16Tools:
Lenghts max. 300 mmweight max. 50 kg
Total load capacity 450 kg
C-Axis+/- 20’’
(VL-160CM)
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 7
Additional accessoires:- Oil skimmer (Disk type)- High pressure coolant through
tool holder- Coolant system with tank 850 l- Coolant bed wash down system- Chip conveyor- Oil mist collector- Air conditioner for electrical
cabinet.- Table with manual 4-jaw chuck- Protection door- Hydraulic power unit- Working light- Warning light.(R/Y/G)- Leveling bolts & seat pads- Manual of operation &
maintenance- Manual of electrical & hydraulic
circuit diagram
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 8
05.06.2018 Wysshus Engineering GmbH | www.wysshus.com | CH-7075 Churwalden 9
Honor Seiki VL – 250 CMHeavy Duty SeriesYou shouldn’t let this unique opportunity pass you by and contact us!
An offer and further information receive you gladly
Markus Havrda.
+41 79 347 43 03
All indicating without guarantee. Subject to the goods being unsold.
