| Date post: | 02-Oct-2018 |
| Category: |
Documents |
| Upload: | truongngoc |
| View: | 216 times |
| Download: | 0 times |
For the Lowest Cost Per Ton
T3 Series
• With twelve models to choose from.• With contact forces from 380 lbs. to 45,000 lbs.• With diameters from 3/4 in. to almost 8 in.
APPROVED
97/23/EC
Introducing the T3-20000
model with fullstroke forces
to almost 75,000 lbs.
3
Introduction
• Diameters from 3/4 in. to almost 8 in.• Contact forces from 380 lbs. to 45,000 lbs.• Side port for easy hose connection.• Upper and lower grooves for mounting flexibility.• Patented safety guide and rod.
Features include:
Introduction............................................................................................3T3-170....................................................................................................4T3-320....................................................................................................6T3-350....................................................................................................8T3-500..................................................................................................10T3-750..................................................................................................12T3-1000................................................................................................14T3-1500................................................................................................16T3-2400................................................................................................18T3-4200................................................................................................20T3-6600................................................................................................22T3-9500................................................................................................24T3-20000..............................................................................................26
Table of Contents:
The innovative T3 Series of gas springs from Hyson Products gives youthe highest force in the smallest space to reduce your cost per ton asmuch as 60%.
™
4
170
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 180 bar/2610 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~40-100 (at 20° C)Repair Kit Not repairableInlet Valve 4018112Charge Fitting T2-770-T3
ø11 mm.43 in.
S
1 mm.04 in.
Y
LR1
M6 charge portDepth 5mm .20 in.
ø19 mm±0.10.75 in. ±.004
17 mm.67 in.
6 mm.24 in.
5 mm.20 in.
M6chargeportBottom View
T3-170X7 7 0.28 37 1.46 44 1.73T3-170X10 10 0.39 40 1.57 50 1.97T3-170X15 15 0.59 45 1.77 60 2.36T3-170X19 19 0.75 49 1.93 68 2.68T3-170X25 25 0.98 55 2.17 80 3.15T3-170X38 38 1.50 68 2.68 106 4.17T3-170X50 50 1.97 80 3.15 130 5.12T3-170X63 63 2.48 93 3.66 156 6.14T3-170X75 75 2.95 110 4.33 185 7.28T3-170X80 80 3.15 115 4.53 195 7.68T3-170X100 100 3.94 135 5.31 235 9.25T3-170X125 125 4.92 160 6.30 285 11.22
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
1700380
2800630
T3-170 Dimensional Information
*All T3 gas springs shipped at maximum charge unless otherwise specified. 5
Ordering Options:
T3-170 X 10 – 2610
Model Stroke Charge Pressure*See Dimensional Max. 180 bar/2610 psi
Information
Mounting Options:
Body ø + 1.0+ 0.5
1 mm.04 in.
20.5 mm.81 in.
7 mm.28 in.
7 mm.28 in.
10 mm.39 in.
ø7 mm.28 in.
32 mm1.26 in.
25 mm.98 in.
45 mm1.77 in.
FCR-19Part No. FCR-19
FMPart No. T2-90-FM
Flanges ordered separately.
in.
32 mm1.26 in.
25 mm.98 in.
45 mm1.77 in.
FCRPart No. T2-90-FCR
Body ø + 1.0+ 0.5
1 mm.04 in.
21.5 mm.85 in.
9 mm.35 in.
30 mm1.18 in.
ø7 mm.28 in.
12 mm.47 in.
25 mm.98 in.
45 mm1.77 in.
™
6
320
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
T3-320X7 7 0.28 37 1.46 44 1.73T3-320X10 10 0.39 40 1.57 50 1.97T3-320X15 15 0.59 45 1.77 60 2.36T3-320X19 19 0.75 49 1.93 68 2.68T3-320X25 25 0.98 55 2.17 80 3.15T3-320X38* 38 1.50 68 2.68 106 4.17T3-320X50* 50 1.97 80 3.15 130 5.12T3-320X63* 63 2.48 93 3.66 156 6.14T3-320X75* 75 2.95 110 4.33 185 7.28T3-320X80* 80 3.15 115 4.53 195 7.68T3-320X100* 100 3.94 135 5.31 235 9.25T3-320X125* 125 4.92 160 6.30 285 11.22
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
3200720
4800 10804900 11005100 11505100 11505200 11705300 11905300 11905300 11905300 11905300 11905300 11905300 1190
T3-320 Dimensional Information
Stroke
17 mm(.67")
ø24.9 mm±0.05(.98”)
5 mm(.20")
R1
1 mm(.04")
5 mm(.20")
M6 charge port
U
S
ø15 mm(.59”)
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 180 bar/2610 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~40-100 (at 20° C)Repair Kit Not repairableInlet Valve 4018112Charge Fitting T2-770-T3
ø15 mm.59 in.
17 mm.67 in. 1 mm
.04 in.
5 mm.20 in.
5 mm.20 in.
ø24.9 mm±0.05.98 in. ±.002
Stroke
R1
Y
S
L
M6 charge portDepth 5 mm
.20 in.
MM6 charge port
Bottom View
*Do not use bottom thread for mounting.
7*All T3 gas springs shipped at maximum charge unless otherwise specified.
Ordering Options:
T3-320 X 15 – 2610
Model Stroke Charge Pressure*See Dimensional Max. 180 bar/2610 psi
Information
Mounting Options:
Body ø + 1.0+ 0.5
1 mm.04 in.
21.5 mm.85 in.
9 mm.35 in.
34 mm1.34 in.
ø7 mm.28 in.
18 mm.71 in.
30 mm1.18 in.
50 mm1.97 in.
Body ø + 1.0+ 0.5
1 mm.04 in.
21.5 mm.85 in.
9 mm.35 in.
Top View
54 mm2.13 in.
1 mm.04 in.
6.5 mm.26 in. 14.5 mm + Stroke
.57 in. + Stroke
ø8.4 mm.33 in.
ø13.5 mm.53 in.36 mm
1.42 in.
38 mm1.50 in.
= =
52 mm2.05 in.
30 mm1.18 in.
15 mm.59 in.
7 mm.28 in.
FCR (For use on upper groove only).Part No. T2-180-FCR
FCPart No. T2-180-FC
SMPart No. T2-180-SM
42 mm1.65 in.
56 mm2.20 in.
29.7 mm ±0.25 mm (4x)1.17 ±0.01 in.
9 mm (4x).35 in.Flange Assembly Screws
M6 (2x)
Flanges ordered separately.
™
8
350
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 180 bar/2610 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~50-100 (at 20° C)Repair Kit T3SK-350Inlet Valve 4018112Charge Fitting T2-770-T3
16 mm.63 in.
S
L
Y
ø31.9 mm +0/-0.21.26 in. +0/-.008
6 mm/.24 in.
M6X1Depth 6 mm.24 in.
Bottom View
M6 charge port
For maintenanceonly, M6
20 mm.79 in.
T3-350X10 10 0.39 40 1.57 50 1.97T3-350X13 13 0.51 43 1.69 56 2.20T3-350X16 16 0.63 46 1.81 62 2.44T3-350X19 19 0.75 49 1.93 68 2.68T3-350X25 25 0.98 55 2.17 80 3.15T3-350X32 32 1.26 62 2.44 94 3.70T3-350X38 38 1.50 68 2.68 106 4.17T3-350X50 50 1.97 80 3.15 130 5.12T3-350X63 63 2.48 93 3.66 156 6.14T3-350X75 75 2.95 105 4.13 180 7.09T3-350X80 80 3.15 110 4.33 190 7.48T3-350X100 100 3.94 130 5.12 230 9.06T3-350X125 125 4.92 155 6.10 280 11.02
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
3600810
5900 13255200 11705300 11905600 12605500 12355500 12355500 12355500 12355500 12355500 12355500 12355500 12355500 1235
T3-350 Dimensional Information
12.5 mm.49 in.
4 mm.16 in.
2 mm.08 in.
R1
3.5 mm.14 in.
9*All T3 gas springs shipped at maximum charge unless otherwise specified.
Mounting Options:
Ordering Options:
T3-350 X 63 – 2610
Model Stroke Charge Pressure*See Dimensional Max. 180 bar/2610 psi
Information
d
e
a
b
c
FFCPart No. T3-350-FFC
FCPart No. T3-350-FC
50 mm1.97 in.
ø49.5 mm1.95 in.12 mm
.47 in.
35 mm1.38 in.
35 mm1.38 in.
6.5 mm.26 in. 17 mm
.67 in.
9 mm.35 in.
ø7 mm.28 in.
ø7 mm.28 in.
ø60 mm2.36 in.
Body ø + 1.0+ 0.5
50 mm1.97 in.
ø49.5 mm1.95 in.35 mm1.38 in.
Flanges ordered separately.
ø49.5 mm1.95 in.
35 mm1.38 in.
17 mm.67 in.
9 mm.35 in.
ø7 mm.28 in.
45 mm1.77 in.
FCSPart No. FCS-32
Body ø + 1.0+ 0.5
™
10
500
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~50-100 (at 20° C)Repair Kit T3SK-500Inlet Valve 4018112Charge Fitting T2-770-T3
20 mm.79 in.
S
L
Y
ø38 mm +0/-0.21.50 in. +0/-.008
6 mm/.24 in.
ø 25 m
m
0.98 i
n.
ø 20 mm0.79 in.
M6X1Depth 6 mm
.24 in.
Bottom View
Note: The bottom threaded hole patternhas been modified. See TechnicalBulletin 07-11 for details.
45°
T3-500X10 10 0.39 40 1.57 50 1.97T3-500X13 13 0.51 43 1.69 56 2.20T3-500X16 16 0.63 46 1.81 62 2.44T3-500X19 19 0.75 49 1.93 68 2.68T3-500X25 25 0.98 55 2.17 80 3.15T3-500X32 32 1.26 62 2.44 94 3.70T3-500X38 38 1.50 68 2.68 106 4.17T3-500X50 50 1.97 80 3.15 130 5.12T3-500X63 63 2.48 93 3.66 156 6.14T3-500X75 75 2.95 105 4.13 180 7.09T3-500X80 80 3.15 110 4.33 190 7.48T3-500X100 100 3.94 130 5.12 230 9.06T3-500X125 125 4.92 155 6.10 280 11.02
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
47001055
T3-500 Dimensional Information
7200 16207100 15957200 16207400 16657300 16407200 16207200 16207200 16207200 16207100 15957100 15957100 15957100 1595
For maintenanceonly, M6
M6 charge port
12.5 mm.49 in.
4 mm.16 in.
2 mm.08 in.
R1
4 mm.16 in.
11*All T3 gas springs shipped at maximum charge unless otherwise specified.
FFCPart No. T2-250-FFC
55 mm2.17 in.
12 mm.47 in.
40 mm1.57 in.
40 mm1.57 in.
6.5 mm.26 in.
ø7 mm.28 in.
Mounting Options:
Ordering Options:
T3-500 X 100 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
d
e
a
b
c
FCPart No. T2-250-FC
17 mm.67 in.
9 mm.35 in.
ø7 mm.28 in.
ø68 mm2.68 in.
ø56.5 mm2.22 in.
ø56.5 mm2.22 in.
40 mm1.57 in.
17 mm.67 in.
9 mm.35 in.
ø7 mm.28 in.
52 mm2.05 in.
FCSPart No. T2-250-FCS
ø56.6 mm2.23 in.
Body ø + 2.0+ 0.5
Body ø + 2.0+ 0.5
40 mm1.57 in.
55 mm2.17 in.
Flanges ordered separately.
™
12
750
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~50-100 (at 20° C)Repair Kit T3SK-750Inlet Valve 4018112Charge Fitting T2-770-T3
25 mm.98 in.
S
L
Y
ø45.2 mm +0/-0.21.78 in. +0/-.008
6 mm/.24 in.
M8X1.25Depth 6 mm.24 in.
Bottom View
20 mm.79 in.
T3-750X10 10 0.39 42 1.65 52 2.05T3-750X13 13 0.51 45 1.77 58 2.28T3-750X16 16 0.63 48 1.89 64 2.52T3-750X19 19 0.75 51 2.01 70 2.76T3-750X25 25 0.98 57 2.24 82 3.23T3-750X32 32 1.26 64 2.52 96 3.78T3-750X38 38 1.50 70 2.76 108 4.25T3-750X50 50 1.97 82 3.23 132 5.20T3-750X63 63 2.48 95 3.74 158 6.22T3-750X75 75 2.95 107 4.21 182 7.17T3-750X80 80 3.15 112 4.41 192 7.56T3-750X100 100 3.94 132 5.20 232 9.13T3-750X125 125 4.92 157 6.18 282 11.10
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
74001665
T3-750 Dimensional Information
12100 272012100 272012100 272011700 263011800 265511800 265511800 265511800 265511800 265511900 267511900 267511900 267511900 2675
For maintenanceonly, M6
M6 charge port
16.5 mm.65 in.
4 mm.16 in.
2 mm.08 in.
R1
4 mm.16 in.
13*All T3 gas springs shipped at maximum charge unless otherwise specified.
FFCPart No. T2-500-FFC
70 mm2.75 in.
70 mm2.75 in.
20 mm.78 in.
50 mm1.96 in.
50 mm1.96 in.
6.5 mm.26 in.
ø9 mm.35 in.
Ordering Options:
T3-750 X 125 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
Mounting Options:
d
e
a
b
c
FCPart No. T2-500-FC
23 mm.91 in.**
13 mm.51 in.
ø9 mm.35 in.
ø86 mm3.38 in.
ø70.7 mm2.78 in.
64 mm2.52 in. 50 mm
1.97 in.
23 mm.91 in.**
13 mm.51 in.
ø9 mm.35 in.
FCSPart No. T2-500-FCS
ø70.7 mm2.78 in.
Body ø + 2.0+ 0.5
Body ø + 2.0+ 0.5
ø70.7 mm2.78 in.50 mm1.97 in.
Flanges ordered separately.
**The upper C groove is now located one mm lower onthe sleeve. See Technical Bulletin 08-02 for details.
™
14
1000
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~50-100 (at 20° C)Repair Kit T3SK-1000Inlet Valve 4018112Charge Fitting T2-770-T3
28 mm1.10 in.
S
L
Y
ø50.2 mm +0/-0.21.97 in. +0/-.008
6 mm/.24 in.
M8X1.25Depth 6 mm.24 in.
Bottom View
20 mm.79 in.
Ordering Options:
T3-1000 X 75 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
T3-1000X13 13 0.51 51 2.01 64 2.53T3-1000X16 16 0.63 54 2.13 70 2.76T3-1000X19 19 0.75 57 2.24 76 2.99T3-1000X25 25 0.98 63 2.48 88 3.46T3-1000X32 32 1.26 70 2.76 102 4.02T3-1000X38 38 1.50 76 2.99 114 4.49T3-1000X50 50 1.97 88 3.46 138 5.43T3-1000X63 63 2.48 101 3.98 164 6.46T3-1000X75 75 2.95 113 4.45 188 7.40T3-1000X80 80 3.15 118 4.65 198 7.80T3-1000X100 100 3.94 138 5.43 238 9.37T3-1000X125 125 4.92 163 6.41 288 11.34
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
92002070
T3-1000 Dimensional Information
13800 310513800 310514000 314514200 319014300 321514500 326014600 328014700 330514700 330514800 332514800 332514800 3325
For maintenanceonly, M6
M6 charge port
17.5 mm.69 in.
8 mm.31 in.
3 mm.12 in.
R2
7 mm.28 in.
15
FFCPart No. T2-750-FFC 75 mm
2.95 in.
75 mm2.95 in.
24 mm.94 in.
56.5 mm2.22 in.
12 mm.47 in.
ø9 mm.35 in.
Mounting Options:
d
e
a
b
c
FCPart No. T2-750-FC
56.5 mm2.22 in.
24 mm.94 in.**
13 mm.51 in.
ø9 mm.35 in.
ø95 mm3.74 in.ø80 mm3.15 in.
ø80 mm3.15 in.
70 mm2.76 in. 56.5 mm
2.22 in.
24 mm.94 in.**
13 mm.51 in.
ø9 mm.35 in.
FCSPart No. T2-750-FCS
ø 9 mm.35 in.
ø 9 mm.35 in.
14 mm.55 in.
ø 15 mm.59 in
ø 15 mm.59 in.
12 mm (2x).47 in.
ø 20 mm.79 in.
20 mm.79 in.
75 mm2.95 in. 56.5 mm
2.22 in.
MPPart No. T2-750-MP
ø80 mm3.15 in.
Body ø + 2.0+ 0.5
Body ø + 2.0+ 0.5
56.5 mm2.22 in.
Flanges ordered separately.
**The upper C groove is nowlocated two mm lower on thesleeve. See Technical Bulletin08-02 for details.
+0- 0.1
20 mm.79 in.
40 mm1.57 in.
50.4 mm1.98 in.
40 mm1.57 in.
20 mm.79 in.
20 mm.79 in.
130 mm5.12 in.
110 mm4.33 in.
9 mm.35 in.
30 mm1.18 in.
10 mm.39 in.
9 mm.35 in.
*All T3 gas springs shipped at maximum charge unless otherwise specified.
SPart No. S-750
™
16
1500
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~50-100 (at 20° C)Repair Kit T3SK-1500Inlet Valve 4018112Charge Fitting T2-770-T3
36 mm1.42 in.
S
L
Y
ø63.2 mm ±0.102.49 in. ±.004
6 mm/.24 in.
M8X1.25Depth 6 mm.24 in.
Bottom View
20 mm.79 in.
T3-1500X13 13 0.51 57 2.24 70 2.76T3-1500X16 16 0.63 60 2.36 76 2.99T3-1500X19 19 0.75 63 2.48 82 3.23T3-1500X25 25 0.98 69 2.72 94 3.70T3-1500X32 32 1.26 76 2.99 108 4.25T3-1500X38 38 1.50 82 3.23 120 4.72T3-1500X50 50 1.97 94 3.70 144 5.67T3-1500X63 63 2.48 107 4.21 170 6.69T3-1500X75 75 2.95 119 4.69 194 7.64T3-1500X80 80 3.15 124 4.88 204 8.03T3-1500X100 100 3.94 144 5.67 244 9.61T3-1500X125 125 4.92 169 6.65 294 11.57
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
150003375
24000 539524100 542024200 544024300 536523800 535523900 537524000 539524100 542024200 544024200 544024300 546524300 5465
T3-1500 Dimensional Information
For maintenanceonly, M6
M6 charge port
19 mm.75 in.
8 mm.31 in.
3 mm.12 in.
R2
7 mm.28 in.
17*All T3 gas springs shipped at maximum charge unless otherwise specified.
Mounting Options:
FFCPart No. T3-1500-FFC
100 mm3.94 in.
24 mm.94 in.
73.5 mm2.89 in.
73.5 mm2.89 in.
12 mm.47 in.
ø11 mm.43 in.
Ordering Options:
T3-1500 X 38 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
ø104 mm4.09 in.
90 mm3.54 in. 73.5 mm
2.89 in.
27 mm1.06 in.
16 mm.63 in.
ø11 mm.43 in.
FCSPart No. T3-1500-FCS
ø104 mm4.09 in.
Body ø + 2.0+ 0.5
100 mm3.94 in.
Flanges ordered separately.
A
20 mm +0
-0.1
A - A
Ø 20 mmA
M12
.79 in.
.79 in.
Ø 9 mm (2x)
Ø 15 mm (2x)
Ø 18 mm (4x)
12 mm (6x)
Ø 10.5 mm (2x)
M12
.35 in. .41 in.
.59 in..47 in.
.71 in.100 mm3.94 in.
73.5 mm2.89 in.
MPPart No. T3-1500-MP
™
18
2400
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~40-100 (at 20° C)Repair Kit T3SK-2400Inlet Valve 4018112Charge Fitting T2-770-T3
45 mm1.77 in.
S
L
Y
ø75.2 mm ±0.102.96 in. ±.004
6 mm/.24 in.
Ordering Options:
T3-2400 X 80 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
M8X1.25Depth 6 mm.24 in.
Bottom View
90°
28.3 mm1.11 in.
40 mm1.57 in.
T3-2400X16 16 0.63 61 2.40 77 3.03T3-2400X19 19 0.75 64 2.52 83 3.27T3-2400X25 25 0.98 70 2.76 95 3.74T3-2400X32 32 1.26 77 3.03 109 4.29T3-2400X38 38 1.50 83 3.27 121 4.76T3-2400X50 50 1.97 95 3.74 145 5.71T3-2400X63 63 2.48 108 4.25 171 6.73T3-2400X75 75 2.95 120 4.72 195 7.68T3-2400X80 80 3.15 125 4.92 205 8.07T3-2400X100 100 3.94 145 5.71 245 9.65T3-2400X125 125 4.92 170 6.69 295 11.61
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
240005395
T3-2400 Dimensional Information
38300 861038500 865538700 870038600 868038400 863539200 881539200 881539200 881539200 881539300 883539300 8835
For maintenanceonly, M6
M6 charge port
21 mm.83 in.
8 mm.31 in.
3 mm.12 in.
R2
7 mm.28 in.
19
Mounting Options:
FFCPart No. T2-1500-FFC 100 mm
3.94 in.
24 mm.94 in.
73.5 mm2.89 in.
73.5 mm2.89 in.
12 mm.47 in.
ø11 mm.43 in.
d
e
a
b
c
FCPart No. T2-1500-FC
73.5 mm2.89 in.
29 mm1.14 in.
16 mm.63 in.
ø11 mm.43 in.
ø122 mm4.80 in.
ø104 mm4.09 in.
ø104 mm4.09 in.
90 mm3.54 in. 73.5 mm
2.89 in.
29 mm1.14 in.
16 mm.63 in.
ø11 mm.43 in.
FCSPart No. T2-1500-FCS
ø 40 mm1.57 in.
100 mm3.94 in. 73.5 mm
2.89 in.
ø 18 mm.71 in.
12 mm (2x).47 in.
ø 11 mm.43 in.
ø 9 mm.35 in.
14 mm.55 in.
ø 15 mm.59 in
20 mm.79 in.
M20
MPPart No. T2-1500-MP
ø104 mm4.09 in.
Body ø + 2.0+ 0.5
Body ø + 2.0+ 0.5
100 mm3.94 in.
Flanges ordered separately.
+0- 0.1
22.5 mm.89 in.
52.5 mm2.07 in.
75.4 mm2.97 in.
52.5 mm2.07 in.
20 mm.79 in.
22.5 mm.89 in.
160 mm6.30 in.
137 mm5.39 in.
11 mm.43 in.
30 mm1.18 in.
11.5 mm.45 in.
11 mm43 in.
SPart No. S-1500
*All T3 gas springs shipped at maximum charge unless otherwise specified.
™
20
4200
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~30-100 (at 20° C)Repair Kit T3SK-4200Inlet Valve 56-072-5500Charge Fitting T2-770-G1/8-P
60 mm2.36 in.
S
L
Y
ø95.2 mm ±0.103.75 in. ±.004
10.5 mm/.41 in.
M8X1.25Depth 12 mm.48 in.
Bottom View
90°
42.4 mm1.67 in.
60 mm2.36 in.
T3-4200X16 16 0.63 74 2.91 90 3.54T3-4200X19 19 0.75 77 3.03 96 3.78T3-4200X25 25 0.98 83 3.27 108 4.25T3-4200X32 32 1.26 90 3.54 122 4.80T3-4200X38 38 1.50 96 3.78 134 5.28T3-4200X50 50 1.97 108 4.25 158 6.22T3-4200X63 63 2.48 121 4.76 184 7.24T3-4200X75 75 2.95 133 5.24 208 8.19T3-4200X80 80 3.15 138 5.43 218 8.58T3-4200X100 100 3.94 158 6.22 258 10.16T3-4200X125 125 4.92 183 7.20 308 12.11
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
420009440
T3-4200 Dimensional Information
Ordering Options:
T3-4200 X 50 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
61700 1387063700 1432060800 1367064300 1455565800 1479567000 1506567800 1524568000 1529068600 1542569100 1553569600 15645
For maintenanceonly, M8
G 1/8 charge port
24 mm.94 in.
8 mm.31 in.
3 mm.12 in.
R2.5
7 mm.28 in.
21
Mounting Options:
FFCPart No. T2-3000-FFC 120 mm
4.72 in.
24 mm.94 in.
92 mm3.62 in.
92 mm3.62 in.
12 mm.47 in.
ø13.5 mm.53 in.
d
e
a
b
c
FCPart No. T2-3000-FC
92 mm3.62 in.
33 mm1.30 in.
18 mm.71 in.
ø13.5 mm.53 in.
ø150 mm5.91 in.
ø130 mm5.12 in.
ø130 mm5.12 in.
110 mm4.33 in. 92 mm
3.62 in.
33 mm1.30 in.
18 mm.71 in.
ø13.5 mm.53 in.
FCSPart No. T2-3000-FCS
ø 60 mm2.39 in.
120 mm4.72 in. 92 mm
3.62 in.
ø 20 mm.79 in.
13 mm.51 in.
ø 13.5 mm.53 in.
ø 9 mm.35 in.
14 mm.55 in.
ø 15 mm.59 in
20 mm.79 in.
M20
MPPart No. T2-3000-MP
ø130 mm5.12 in.
Body ø + 2.0+ 0.5
Body ø + 2.0+ 0.5
120 mm4.72 in.
Flanges ordered separately.
+0- 0.1
25 mm.98 in.
67.5 mm2.66 in.
95.4 mm3.76 in.
62.5 mm2.46 in.
20 mm.79 in.
25 mm.98 in.
195 mm7.68 in.
170 mm6.69 in.
13 mm.51 in.
30 mm1.18 in.
12.5 mm.49 in.
13 mm51 in.
SPart No. S-3000
*All T3 gas springs shipped at maximum charge unless otherwise specified.
™
22
6600
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
T3-6600X16 16 0.63 84 3.31 100 3.94T3-6600X19 19 0.75 87 3.43 106 4.17T3-6600X25 25 0.98 93 3.66 118 4.65T3-6600X32 32 1.26 100 3.94 132 5.20T3-6600X38 38 1.50 106 4.17 144 5.67T3-6600X50 50 1.97 118 4.65 168 6.61T3-6600X63 63 2.48 131 5.16 194 7.64T3-6600X75 75 2.95 143 5.63 218 8.58T3-6600X80 80 3.15 148 5.83 228 8.98T3-6600X100 100 3.94 168 6.61 268 10.55T3-6600X125 125 4.92 193 7.60 318 12.52
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
6630014905
T3-6600 Dimensional Information
75 mm2.95 in.
S
L
Y
ø120.2 mm ±0.104.73 in. ±.004
10.5 mm/.41 in.
M10X1.5Depth 12 mm.48 in.
Bottom View
90°
56.6 mm2.23 in.
80 mm3.15 in.
Ordering Options:
T3-6600 X 16 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~30-100 (at 20° C)Repair Kit T3SK-6600Inlet Valve 56-072-5500Charge Fitting T2-770-G1/8-P
89000 2001091000 2046093900 2111096100 2160598200 22075
100600 22615102400 23020103400 23245104100 23405105400 23695106500 23945
For maintenanceonly, M8
G 1/8 charge port
25.5 mm1.01 in.
8 mm.31 in.
3 mm.12 in.
R2.5
7 mm.28 in.
23
Mounting Options:
FFCPart No. T2-5000-FFC 140 mm
5.51 in.
24 mm.94 in.
109.5 mm4.31 in.
12 mm.47 in.
ø13.5 mm.53 in.
d
e
a
b
c
FCPart No. T2-5000-FC
109.5 mm4.31 in.
36 mm1.42 in.
21 mm.83 in.
ø13.5 mm.53 in.
ø175 mm6.89 in.
ø155 mm6.10 in.
ø155 mm6.10 in.
130 mm5.12 in. 109.5 mm
4.31 in.
36 mm1.42 in.
21 mm.83 in.
ø13.5 mm.53 in.
FCSPart No. T2-5000-FCS
ø 80 mm3.15 in.
140 mm5.51 in. 109.5 mm
4.31 in.
ø 20 mm.79 in.
13 mm.51 in.
ø 13.5 mm.53 in.
ø 11 mm.43 in.
15 mm.59 in.
ø 18 mm.71 in
20 mm.79 in.
M20
MPPart No. T2-5000-MP
ø155 mm6.10 in.
109.5 mm4.31 in.
140 mm5.51 in.
Body ø + 2.0+ 0.5
Body ø + 2.0+ 0.5
Flanges ordered separately.
+0- 0.1
27.5 mm1.08 in.
77.5 mm3.05 in.
120.4 mm4.74 in.
74 mm2.91 in.
20 mm.79 in.
27.5 mm1.08 in.
220 mm8.66 in.
195 mm7.68 in.
13 mm.51 in.
30 mm1.18 in.
12.5 mm.49 in.
13 mm51 in.
SPart No. S-5000
*All T3 gas springs shipped at maximum charge unless otherwise specified.
™
24
9500
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
90 mm3.54 in.
S
L
Y
ø150.2 mm ±0.105.91 in. ±.004
10.5 mm/.41 in.
G 1/8 charge port
M10X1.5Depth 13 mm.51 in.
Bottom View
90°
70.7 mm2.78 in.
100 mm3.94 in.
Ordering Options:
T3-9500 X 125 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
T3-9500X19 19 0.75 97 3.82 116 4.57T3-9500X25 25 0.98 103 4.06 128 5.04T3-9500X32 32 1.26 110 4.33 142 5.59T3-9500X38 38 1.50 116 4.57 154 6.06T3-9500X50 50 1.97 128 5.04 178 7.01T3-9500X63 63 2.48 141 5.55 204 8.03T3-9500X75 75 2.95 153 6.02 228 8.98T3-9500X80 80 3.15 158 6.22 238 9.37T3-9500X100 100 3.94 178 7.01 278 10.94T3-9500X125 125 4.92 203 7.99 328 12.91
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
9500021360
135000 30350139000 31250142000 31925143000 32150146000 32825148000 33275149000 33500150000 33725151000 33950152000 34175
T3-9500 Dimensional Information
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~30-100 (at 20° C)Repair Kit T3SK-9500Inlet Valve 56-072-5500Charge Fitting T2-770-G1/8-P
For maintenanceonly, M8
27.5 mm1.08 in.
8 mm.31 in.
3 mm.12 in.
R2.5
8 mm.31 in.
25
Mounting Options:
FFCPart No. T2-7500-FFC 190 mm
7.48 in.
24 mm.94 in.
12 mm.47 in.
ø17.5 mm.69 in.
ø195 mm7.68 in.
162 mm6.38 in. 138 mm
5.43 in.
41 mm1.61 in.
27 mm1.06 in.
ø17.5 mm.69 in.
FCSPart No. T2-7500-FCS
ø 100 mm3.94 in.
190 mm7.48 in. 138 mm
5.43 in.
ø 26 mm1.02 in.
17 mm.67 in.
ø 17.5 mm.69 in.
ø 11 mm.43 in.
20 mm.79 in.
ø 18 mm.71 in
25 mm.98 in.
M20
MPPart No. T2-7500-MP
ø195.2 mm7.69 in.
138 mm5.43 in.
190 mm7.48 in.
Body ø + 2.0+ 0.5
138 mm5.43 in.
d
e
a
b
c
41 mm1.61 in.
27 mm1.06 in.
ø17.5 mm.69 in.
ø220 mm8.66 in.
ø195 mm7.68 in.
Body ø + 2.0+ 0.5
FCPart No. T2-7500-FC
138 mm5.43 in.
Flanges ordered separately.
+0- 0.1
30 mm1.18 in.
95 mm3.74 in.
150.4 mm5.92 in.
100 mm3.94 in.
20 mm.79 in.
30 mm1.18 in.
260 mm10.24 in.
230 mm9.06 in.
13 mm.51 in.
30 mm1.18 in.
15 mm.59 in.
13 mm51 in.
SPart No. S-7500
*All T3 gas springs shipped at maximum charge unless otherwise specified.
™
26
20000
Note: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary.
130 mm5.12 in.
S
L
Y
ø194.9 mm ±0.107.67 in.
15 mm/.59 in.
G 1/8 charge port
M12 (4x)Depth 16 mm.63 in.
Bottom View
90°
84.8 mm3.34 in.
120 mm4.72 in.
Ordering Options:
T3-20000 X 75 – 2175
Model Stroke Charge Pressure*See Dimensional Max. 150 bar/2175 psi
Information
T3-20000X19 19 0.75 129 5.08 148 5.83T3-20000X25 25 0.98 135 5.31 160 6.30T3-20000X32 32 1.26 142 5.59 174 6.85T3-20000X38 38 1.50 148 5.83 186 7.32T3-20000X50 50 1.97 160 6.30 210 8.27T3-20000X63 63 2.48 173 6.81 236 9.29T3-20000X75 75 2.95 185 7.28 260 10.24T3-20000X80 80 3.15 190 7.48 270 10.63T3-20000X100 100 3.94 210 8.27 310 12.20T3-20000X125 125 4.92 235 9.25 360 14.17
Model X Stroke
Stroke Smm in
ContactForceN lbs.
Full StrokeForce
N lbs.Y
mm inL
mm in
20000045000
259000 58200270000 60750280000 63000287000 64600298000 67000307000 69100313000 70500315000 70900323000 72700330000 74250
T3-20000 Dimensional Information
Product Specifications:
Pressure Medium Nitrogen GasMaximum Charging Pressure 150 bar/2175 psiMinimum Charging Pressure 25 bar/360 psiMax. Operating Temperature 80° C/176° FMax. Piston Rod Velocity 96m/min/315ft/minMaximum Strokes per Minute ~15-40 (at 20° C)Repair Kit T3SK-20000Inlet Valve 56-072-5500Charge Fitting T2-770-G1/8-P
For maintenanceonly, M8
33.5 mm1.32 in.
8 mm.31 in.
3 mm.12 in.
R2.5
8 mm.31 in.
27*All T3 gas springs shipped at maximum charge unless otherwise specified.
Mounting Options:
FFCPart No. T2-10000-
210 mm8.27 in.
24 mm.94 in.
13 mm.51 in.
ø17.5 mm.69 in.
ø240.4 mm 9.46 in.
210 mm8.27 in. 170 mm
6.69 in.
47 mm1.85 in.
27 mm1.06 in.
ø17.5 mm.69 in.
FCSPart No. T2-10000-FCS
ø 120 mm4.72 in.
210 mm8.27 in. 170 mm
6.69 in.
ø 26 mm1.02 in.
17 mm.67 in.
ø 17.5 mm.69 in.
ø 13.5 mm (x4).53 in.
13 mm (x4).51 in.
ø 20 mm.79 in
25 mm.98 in.
M20
MPPart No. T2-10000-MP
ø240.4 mm9.46 in.
170 mm6.69 in.
210 mm8.27 in.
Body ø + 2.0+ 0.5
170 mm6.69 in.
Flanges ordered separately.
+0- 0.1
©Hyson Products 2010 T2LLS2M0210
Nitro-Dyne® XP Manifolds
T2 Standard Gas Springs
Tanker®T and Tanker®S Gas Springs
T3 Gas Springs
Adaptive Cams Mechanical Cams
Di-Dro Advanced Forming
Controllable Gas Springs
Mini Gas Springs
Accessories
Delay Return Manifolds
T4 Gas Springs
10367 Brecksville Road
Brecksville, OH 44141 USA
Tel: 1-800-876-4976, 440-526-5900
Fax: 440-526-6807
Email: [email protected]
www.hysonproducts.com
975 Fraser Drive, Unit 14
Burlington, Ont L7L 4X8 Canada
Tel: 905-331-1311
Fax: 905-331-1342
Blvd. Carlos Salinas de Gortari
#1010 Ote
Col. Apodaca Centro
CP 66600 Apodaca, N.L. Mexico
Tel: 5281 8145-0570
Fax: 5281 8145-0571
