+ All Categories
Home > Documents > TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote....

TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote....

Date post: 02-Jun-2020
Category:
Upload: others
View: 7 times
Download: 0 times
Share this document with a friend
6
INPUT 12-24VDC RGBW RGB CCT DIM ON Push-Dim COM IN TASK LIGHTING Specialising In LED Solutions WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004 While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice. APPLICATIONS: # Controlling RGBW, RGB, Dual white & dimming single colour strips. # Lounges, kitchens, bedroom, bathrooms, bars, restaurants etc NOTE: # See website for range of remote options. # Remote batteries (not supplied). # Remotes need to be synced to the controller. # Controllers and remotes sold separately. FEATURES: # Control modules can wirelessly relay commands allowing for unlimitted colour syncing from one remote. # PWM (pulse width modulation) output. # Push dimming & control function. # Modes dip switch selectable. IP20 12-24V 288W SPECIFICATION CODE LCRGBWSD-V4-S WATTS OUTPUT 144W @12V or 288W @24V AMPS OUTPUT 3Amp x 4Channels (12Amp Total) OUTPUT MODE Pulse Width Modulation (PWM) INPUT 12 - 24VDC DIMMING RANGE 0% - 100% WORKING TEMP -30 to 55degC IP RATING IP20 CONNECTIONS Covered connector block EMC EMC compliant RF RANGE 30m if unobstructed DIMENSIONS 52 52 26 4 Channel Power Input +ve Power Input -ve Push Dim Common Push Dim Switch White Output -ve LED Output +ve Blue Output -ve Green Output -ve Red Output -ve DIP Switch Mode Select 4 Channel Controller RGBW, RGB, Tuneable White & Dimmer Works with a wide range of RF remotes Multi Purpose 3Amp x 4Channel Controller LCRGBWSD-V4-S
Transcript
Page 1: TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote. DIM ON Push-Dim IN COM TASK LIGHTING ... Zone 6 Zone 6 Zone 6 Zone 8 Zone 8 Zone 8

INPUT 12-24VDC

RGBW RGB

CCT

DIM ON

Push-Dim

COMIN

TASKLIGHTING

Specialising In LED Solutions

WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004

While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.

APPLICATIONS: # Controlling RGBW, RGB, Dual white & dimming single colour strips.# Lounges, kitchens, bedroom, bathrooms, bars, restaurants etc

NOTE:# See website for range of remote options.# Remote batteries (not supplied).# Remotes need to be synced to the controller.# Controllers and remotes sold separately.

FEATURES: # Control modules can wirelessly relay commands allowing for unlimitted colour syncing from one remote.# PWM (pulse width modulation) output.# Push dimming & control function.# Modes dip switch selectable.

IP20

12-24V

288W

SPECIFICATIONCODE LCRGBWSD-V4-S

WATTS OUTPUT 144W @12V or 288W @24V

AMPS OUTPUT 3Amp x 4Channels (12Amp Total)

OUTPUT MODE Pulse Width Modulation (PWM)

INPUT 12 - 24VDC

DIMMING RANGE 0% - 100%WORKING TEMP -30 to 55degC

IP RATING IP20

CONNECTIONS Covered connector blockEMC EMC compliantRF RANGE 30m if unobstructed

DIMENSIONS

52

52

26

4 Channel

Power Input +ve

Power Input -ve

Push Dim Common

Push Dim Switch

White Output -ve

LED Output +veBlue Output -ve

Green Output -ve

Red Output -ve

DIP Switch Mode Select

4 Channel Controller RGBW, RGB, Tuneable White & Dimmer

Works with a wide rangeof RF remotes

Multi Purpose 3Amp x 4Channel

ControllerLCRGBWSD-V4-S

Page 2: TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote. DIM ON Push-Dim IN COM TASK LIGHTING ... Zone 6 Zone 6 Zone 6 Zone 8 Zone 8 Zone 8

TASKLIGHTING

Specialising In LED Solutions

WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004

While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.

Dimming Wireless Relaying - Single Zone

Dimming Wireless Relaying - Multiple Zones

30m 30m 30m

30m

30m

30m

Zone 1

Zone 2

NOTE:# The 30m max wireless transmission distance is with unobstructed line of sight. Transmission distances may be significantly less with walls, metal, concrete etc in the way. Other transmission sources such as WiFi & microwaves etc may also reduce the transmission range. Where obstructions and interference sources exist it is recommended that testing the transimiission range before finalising the project and module placement may need to be altered to acheive the desired result. Intermedaitely placed modules with now load can be used as a relay where transmission distances are shortened.

30m

30m

30m

30m

30m

30m

30m

30m

30m

30m

30m

30m30m

30m

30m

30m

Zone 1Zone 2

Zone 2

Zone

3

Zone

3

Zone

7

Zone

7

Zone 4

Zone 4

Zone 4

Zone 5

Zone 5

Zone 6

Zone 6

Zone 6

Zone 8

Zone 8

Zone 8

Zone

130m

Page 3: TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote. DIM ON Push-Dim IN COM TASK LIGHTING ... Zone 6 Zone 6 Zone 6 Zone 8 Zone 8 Zone 8

TASKLIGHTING

Specialising In LED Solutions

WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004

While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.

W

INPUT 12-24VDCRGBW

Push-Dim

COMIN

1 2ON

RGBW Remote

Push Switch

100-240VAC

Constant Voltage Driver12VDC or 24VDC

RGBW LED Strip

RGBW Wiring Example

RGB Wiring Example

INPUT 12-24VDC

Push-Dim

COMIN

1 2ON

RGB

RGB Remote

Push Switch

100-240VAC

Constant Voltage Driver12VDC or 24VDC

RGB LED Strip

CCT Wiring Example

+CWWW

+CWWW

INPUT 12-24VDC

Push-Dim

COMIN

1 2ON

CCT

CCT Remote

Push Switch

100-240VAC

Constant Voltage Driver12VDC or 24VDC

Dual White LED Strip

Dual White LED Strip

Page 4: TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote. DIM ON Push-Dim IN COM TASK LIGHTING ... Zone 6 Zone 6 Zone 6 Zone 8 Zone 8 Zone 8

TASKLIGHTING

Specialising In LED Solutions

WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004

While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.

Dim Wiring Example

+

+

+

+INPUT

12-24VDCPush-Dim

COMIN

1 2ON

DIM

Single Colour LED Strip

Single Colour LED Strip

Single Colour LED Strip

Single Colour LED Strip

Dim Remote

Push Switch

100-240VAC

Constant Voltage Driver12VDC or 24VDC

Four rotation speeds selectable10 �ashes = 6 second rotaions, 5 �ashes = 30 second rotaion, 2 �ashes = 1 minute rotaion, 1 �ash = 6 minute rotaion

Colour Rotation

Single Colour

Dual White

RGB

RGBW

Click On/Off

On/Off

On/Off

On/OffClick

Click

Click

Double Click

Double Click

Double Click

Double Click

Long Press (>1s from OFF)

Long Press (>1s from On)

Long Press (>1s from OFF)

Long Press (>1s from On)

Long Press (>1s from OFF)

Long Press (>1s from On)

Long Press (>1s from OFF)

Long Press (>1s from On)

Dimming UP/DOWN

Turn on at 100% or 10% & vice-versa

Dimming UP/DOWN

Dimming UP/DOWN

Turn on at 100% or 10% & vice-versa

Colour temperature UP/DOWN (turn off & back on to return to dimming)

If on colour mode this will change rotation speedIf on white mode this will dim UP/DOWN

Change from colour mode to white mode (RGB fully mixed) & vice-versa

If on colour mode this will START/STOP colour rotationIf on white mode this will dim UP/DOWN

Change between colour mode, white mode (white channel) & colour + white

If on colour mode this will change rotation speedIf on white mode or colour + white mode this will dim white UP/DOWNIf on colour mode this will START/STOP rotationIf on white mode or colour + white mode this will dim white UP/DOWN

Push Switch Functions

Page 5: TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote. DIM ON Push-Dim IN COM TASK LIGHTING ... Zone 6 Zone 6 Zone 6 Zone 8 Zone 8 Zone 8

TASKLIGHTING

Specialising In LED Solutions

WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004

While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.

Matching Remotes To ControllersUsing Controller DIP SwitchesMatching:Change DIP switch setting & immediately short pres on/off key (single zone remote)or zone key (multi zone remote)

Using Power RestartMatching:From power off switch power on & immediatelyshort press on/off key (single zone remote) orzone key (multi zone remote).The light �ashes 3 times for a successful match.

Deleting:From power off switch power on & immediatelyshort press the on/off key (single zone remote) or zone key (multi zone remote).The light �ashes 5 times for a successful un match.

1

1 0 0

9 0

8 0

7 0

6 0

5 0

4 0

3 0

2 0

1 0

PWM

dut

y(%

)

5 0 6 0

Brightness(%)1 0 2 0 3 0 4 0

Gamma=1.61 0 0

9 0

8 0

7 0

6 0

5 0

4 0

3 0

2 0

1 0

PWM

dut

y(%

)

5 0 6 0 7 0 8 0 9 0 1 0 0

Brightness(%)

1 0 2 0 3 0 4 0

G a mma =1 . 01 0 0

9 0

8 0

7 0

6 0

5 0

4 0

3 0

2 0

1 0

PWM

dut

y(%

)

Cool white(Max. 6500K)

W arm white(Min. 2700K)

Neutral white(4000K)

Recommended CCT range7 0 8 0 9 0 1 0 0

No. No.RGB/RGBW �ash

26

54

10

83

7

9

RGB/RGBW smooth rotation

6 Colour �ash6 Colour smooth rotation

Yellow cyan purple smoth rotation

RGB/RGBW fade in/out

Green fade in/out

Red fade in/out

White fade in/outBlue fade in/out

CH1, CH3 = Warm white LEDCH2, CH4 = Cool white LEDEach channel can supply up to 16W (@24V) & white balance can be controlled as below

Colour Temperature

Power DistributionCH1=0W, CH2=72WCH3=0W, CH4=72W

Warm WhiteNeutral WhiteCool White

CH1=72W, CH2=0WCH3=72W, CH4=0W

CH1=36W, CH2=36WCH3=36W, CH4=36W

Dimming Curve For RGBW/RGBDimming Curve For Dual WhiteLinear Dual White Colour Tuning

Name Name

RGBW & RGB Dynamic Modes

Dual White Mode & Dimming Curves

Page 6: TASKtasklighting.co.nz/specs/LCRGBWSD_V4_S.pdf · for unlimitted colour syncing from one remote. DIM ON Push-Dim IN COM TASK LIGHTING ... Zone 6 Zone 6 Zone 6 Zone 8 Zone 8 Zone 8

TASKLIGHTING

Specialising In LED Solutions

WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004

While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.

Syncronising Remotes & RGBW Modules

Auto Transmition & Auto SyncronisationAs shown in the diagrams on page 2, one receiving control module can auto transmit commands from the remote to many other down stream control modules.This provides the ability for one remote to control almost limitless distances all in sync.For auto transmission & syncing to work each receiving module needs to be successfully must be matched to the remote (1 zone remote) and to each zone key (multi zone remotes).

NOTE:# The 30m max wireless transmission distance is with unobstructed line of sight. Transmission distances may be significantly less with walls, metal, concrete etc in the way. Other transmission sources such as WiFi & microwaves etc may also reduce the transmission range. Where obstructions and interference sources exist it is recommended that testing the transimiission range before finalising the project and module placement may need to be altered to acheive the desired result. Intermedaitely placed modules with now load can be used as a relay where transmission distances are shortened.


Recommended