FOREST 1 FOREST Forestry Mulchers and Universal Forestry Mulchers Designed with passion and realized adopting particular constructive clever devices, the FOREST product range’s machines stand out for their excellent robustness and reliability. Due to the use of highly wear-resistant steels they are suitable to carry out particularly heavy tasks. While the forestry mulchers are conceived for shredding trees, bushes, forestry cutting waste and heaps of brushwood, the universal forest mulchers are suitable for cutting and crushing tree stumps and roots, deep underground in uncultivated lands. Versatile and efficient, these machines are available in two versions: a rotor with fixed tools or with mobile hammers. Due to these characteristics, they can meet the specific requirements of any kind of work. Coupled to tractors with power take-off and creeper gears, these machines guarantee optimal performances.
Transcript
FOREST 1
FORESTForestry Mulchers and Universal Forestry Mulchers
Designed with passion and realized adopting particular constructive clever devices, the FOREST product range’s machines stand out for their excellent robustness and reliability. Due to the use of highly wear-resistant steels they are suitable to carry out particularly heavy tasks.
While the forestry mulchers are conceived for shredding trees, bushes, forestry cutting waste and heaps of brushwood, the universal forest mulchers are suitable for cutting and crushing tree stumps and roots, deep underground in uncultivated lands.
Versatile and efficient, these machines are available in two versions: a rotor with fixed tools or with mobile hammers. Due to these characteristics, they can meet the specific requirements of any kind of work. Coupled to tractors with power take-off and creeper gears, these machines guarantee optimal performances.
The importance to details
The FAE machines are designed and manufactured so as to ensure the highest operability over the years. Only an extreme attention to each construction detail, the use of high quality materials and technologically advanced components enable to attain the exceptional performance standards which characterize the machines with the FAE trademark.
The guarantee of the original
In order to maintain these performances and attain the highest efficiency after years of use, FAE advises you to use its own original spare parts exclusively, supplied on request. In fact, the quality of the results is due to the special design of the patented tools and the availability of inserts in hard metal that boost the resistance to wear and tear. The replacement of the parts, both of fixed teeth and free swinging hammers is done very quickly and is extremely easy.
Only if you address to the FAE Service can you be certain of the FAE original quality and warrantee.
FOREST 3
UML/LOWForestry mulcher with fixedteeth rotor for tractorsbetween 60 and 110 HP.
Especially developed for tractors with low three
point hitch (e.g. crawler tractors).
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids.Options: hydraulic top link, special skids to go underground, pushing frame, possibility to have the rotor equipped with tooth type“C/SD” or “D”.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
The data refers to the machine without options.
UML/LOW
UML/LOW 150 60 100 540 1580 1840 930 200 32+2
UML/LOW 175 70 110 540 1820 2080 1060 200 36+2
UML/LOW 200 80 110 540 2060 2380 1190 200 42+2
Tooth type C (standard) Tooth type C/SS (side scraper)
PTOrpm
Model Teeth q.ty/typeC+C/SS
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
Tooth type C/SD (option) Tooth type D (option)
Grinding diameter mm (max)
FOREST 4
UML/SS
UML/SSForestry mulcher with fixed teeth rotor for tractors between 60 and 110 HP.
The data refers to the machine without options.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.Options: hydraulic top link, special skids to go underground, pushing frame, possibility to have the rotor equipped with tooth type “C/SD” or “D”.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
Tooth type C (standard) Tooth type C/SD (option) Tooth type D (option)
FOREST 5
FML/SS
FML/SSForestry mulcher withswinging hammers rotorfor tractors between60 and 110 HP.
The data refers to the machine without options.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood.Options: hydraulic top link, pushing frame.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
UML/STForestry mulcher with fixed teeth rotor for tractors between 50 and 110 HP.
The data refers to the machine without options.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.Options: hydraulic top link, special skids to go underground, pushing frame, possibility to have the rotor equipped with tooth type “C/SD” or “D”.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
Tooth type C (standard) Tooth type C/SD (option) Tooth type D (option)
FOREST 7
FML/STForestry mulcher withswinging hammers rotorfor tractors between50 and 110 HP.
The data refers to the machine without options.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood.Options: hydraulic top link, pushing frame.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
UML/DTForestry mulcher with fixed teeth rotor for tractors between 80 and 130 HP.
The data refers to the machine without options.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids, “Anti dust” machine body.Options: hydraulic top link, mechanic or hydraulic pushing frame, special skids to go underground, possibility to have the rotor equipped with tooth type “C/SD” or “D”.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
UML/DT
UML/DT 200 80 130 1000 2060 2380 1290 250 42+2
UML/DT 225 90 130 1000 2300 2620 1400 250 46+2
Tooth type C/SS (side scraper)
PTOrpm
Model Teeth q.ty/typeC+C/SS
Grinding diameter mm (max)
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
Tooth type C (standard) Tooth type C/SD (option) Tooth type D (option)
FOREST 9
FML/DTForestry mulcher withswinging hammers rotorfor tractors between80 and 130 HP.
FML/DT
FML/DT 200 80 130 1000 2060 2380 1350 250 32
FML/DT 225 90 130 1000 2300 2620 1460 250 36
Hammer Type FMM
The data refers to the machine without options.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood, adjustable skids, “Anti dust” machine body.Options: hydraulic top link, mechanic or hydraulic pushing frame.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
PTOrpm
Model Teeth q.ty/typeFMM
Grinding diameter mm (max)
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
FOREST 10
UMMForestry mulcher with fixed teeth rotor for tractors between 90 and 180 HP.
UMM
The data refers to the machine without options.
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids, self ranging system of the PTO drive shaft gearbox (NOT for UMM/ST 175), completely closed “Anti dust” machine body.Options: mechanic or hydraulic pushing frame, special skids to go underground, raker teeth on hydraulic hood(only for 200, 225 and 250), possibility to have the rotor equipped with tooth type “C/SD” or “D”.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
Standard equipment: PTO drive shaft, gearbox with freewheel, hydraulic rear hood, adjustable skids ,completely closed “Anti dust” machine body.Options: hydraulic top link, mechanic or hydraulic pushing frame.Notes: For their correct usage, creeper gear transmission and reversible driving console are recommended.
PTOrpm
Model Teeth q.ty/typeFMM
Grinding diameter mm (max)
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
FOREST 12
UMM/SUMM/S/HPForestry mulcher with fixed teeth rotor for tractors between 130 and 300 HP.
Tooth type B Tooth type C/SD (option)Tooth type C Tooth type C/SS (side scraper)
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids, hydraulic top link, third line counter blades, self ranging system of the PTO drive shaft/gearbox. UMM/S/HP stronger transmission for tractors up to 280 HP.Options: mechanic or hydraulic pushing frame, special skids to go underground, raker teeth on hydraulic hood, possibility to have the rotor equipped with tooth type “B” or “B/SR”, tooth type “C” or “C/SD”.Notes: For their correct usage, creeper gear transmission and reversible driving console
Standard equipment: PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood, adjustable skids, hydraulic top link, third line counter blades, self ranging system of the PTO drive shaft/gearbox.Options: mechanic or hydraulic pushing frame, special skids to go underground, raker teeth on hydraulic hood, possibility to have the rotor equipped with tooth type “C/SD” or type “A/SR”.Notes: For their correct usage, creeper gear transmission and
reversible driving console
are recommended.
Tooth type A Tooth type C/SD (option)
Model PTOrpm
Grinding diameter mm (max)
Workingwidth mm
Overall width mm
Weight with rotortype C Kg type A Kg
Teeth q.ty type A+C/SS type C+C/SS
Tractor HP min max
Model PTOrpm
Grinding diameter mm (max)
Workingwidth mm
Overall width mm
Weight with rotortype C Kg type A Kg
Teeth q.ty type A+C/SS type C+C/SS
Tractor HP min max
Tooth type A/SR (option)
FOREST 14
SFLForestry mulcher and stone crusher for tractors between 120 and 160 HP,with mulching diameterand maximumworking depth of 15 cm.
SFL
The data refers to the machine without options. *540 rpm for stone crushing – 1000 rpm for mulching
Standard equipment: PTO drive shaft with cam clutch, gearbox with free wheel, penetration skids, hydraulic rear hood, adjustable counter knives, mechanic pushing frame, dosing blade.Options: hydraulic top link, hydraulic pushing frame, road kit or hydraulic support roller.
SSL SpeedForestry tiller for tractors between 100 and 220 HP with a max grindingdiameter of 30 cm.
SSL Speed
Standard equipment: gear transmission, PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.Options: hydraulic top link, hydraulic support roller for height adjustment, self-levelling guard frame, stronger PTO drive line (W2600) (only for DT-models).Notes: for their correct usage, a creeper gear transmission is recommended
Tooth type C/SS (side scraper)Tooth type B (standard) Tooth type B/SR (option) Tooth type G (option)
FOREST 16
SSLForestry tiller for tractors between 100 and 220 HP with a max grindingdiameter of 30 cm.
SSL
SSL 150 100 160 1000 1580 1880 2080 300 300 58+4
SSL 175 110 160 1000 1820 2120 2260 300 300 70+4
SSL 200 120 220 1000 2060 2360 2620 300 300 78+4
SSL 225 130 220 1000 2300 2600 2810 300 300 86+4
SSL 250 140 220 1000 2540 2840 2990 300 300 100+4
The data refers to the machine without options.
Standard equipment: gear transmission, PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood.Options: hydraulic top link, hydraulic support roller for height adjustment.Notes: For their correct usage, a creeper gear transmission is recommended.
PTOrpm
Model Teeth q.ty/typeB+C/SS
Grinding diameter mm (max)
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
Working depthmm (max)
Tooth type C/SS (side scraper)Tooth type B (standard) Tooth type B/SR (option) Tooth type G (option)
FOREST 17
SSMSSM/HPForestry tiller for tractors between 150 and 300 HP with a grinding diameter of 50 cm.
Side scraper Type MH
SSM
SSM 200 150 250 1000 2080 2410 3090 500 400 76+4
SSM 225 170 250 1000 2320 2650 3340 500 400 88+4
SSM 250 190 250 1000 2560 2890 3590 500 400 102+4
The data refers to the machine without options.
Standard equipment: double side gear type transmission, PTO drive shaft with cam clutch, gearbox with freewheel, hydraulic rear hood. In addition, for the SSM/HP model: stronger transmission for tractors up to 300 HP. Options: hydraulic top link, hydraulic support roller for height adjustment, adjustable dosing blade, possibility to have the rotor equipped with tooth type “A/SR”.Notes: For their correct usage, a creeper gear transmission is recommended.
Tooth type A (standard) Tooth type A/SR (option) Tooth type F (option)
FOREST 18
SSHForestry tiller for tractors between 160 and 350 HP with a max grindingdiameter of 70 cm.
The data refers to the machine without options.
SSH
Side scraper Type MH
SSH 150 160 280 1000 1600 1980 3670 700 500 58+4
SSH 175 180 280 1000 1840 2220 3920 700 500 68+4
SSH 200 200 350 1000 2080 2460 4250 700 500 78+4
SSH 225 220 350 1000 2320 2700 4580 700 500 88+4
SSH 250 240 350 1000 2560 2940 4850 700 500 98+4
Standard equipment: double side gear type transmission, PTO drive shaft with cam clutch, gearbox with freewheel,hydraulic rear hood.Options: hydraulic top link, hydraulic support roller for height adjustment, adjustable dosing blade, possibility to have the rotor equipped with tooth type “A/SR”. Notes: For their correct usage, a creeper gear transmission is recommended.
PTOrpm
Model Teeth q.ty/typeA+MH
Grinding diameter mm (max)
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
Working depthmm (max)
Tooth type A (standard) Tooth type A/SR (option)
Tooth type F (option)
FOREST 19
SCHSCH/GTStump cutter for tractors between 130 and 350 HP with a max working depth of 60 cm.
Side scraper Type MH
Standard equipment: SCH 45 and SCH 55: PTO drive shaft with cam clutch, hydraulic side shifting, belts transmission.SCH/GT 65: PTO drive shaft with cam clutch, hydraulic side shifting, gear transmission.SCH/GT 75: PTO drive shaft with cam clutch, gear transmission.Options: hydraulic top link, possibility to have the rotor equipped with tooth type “A/SR”.Notes: For their correct usage, a creeper gear transmission is recommended.
PTOrpm
Model Teeth q.ty/typeA+MH
Working depth mm (max)
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
The data refers to the machine without options. * with hydraulic side shifting
SCH with hydraulic side shifting
130 180 1000 520 1800 1970 500 30+4
160 280 1000 630 1800 2690 500 36+4
SCH 45
SCH 55
SCH/GT
SCH/GT 65*
SCH/GT 75
180 300 1000 730 1800 2900 500 28+4
200 350 1000 810 1280 3200 600 34+4
PTOrpm
Model Teeth q.ty/typeA+MH
Working depth mm (max)
Workingwidth mm
Overall width mm
WeightKg
Tractor HP min max
Tooth type A (standard) Tooth type A/SR (option) Tooth type F (option)
FOREST AGRICULTURE ROAD HYDRAULIC PRIME MOVER RECYCLING
FAE GROUP S.p.A. Zona Produttiva, 18 - P. O. Box 61 38013 Fondo (TN) Italy
