FORESTRY TILLERS FAE Forestry Tillers are suitable for deep grinding and crushing of unworked soils, stumps and roots. The mastication of stumps and the mulching of their roots, give you perfect land reclamation. The quality of our forestry tillers is unbeatable in terms of durability and reliability, thanks to our superior building materials and our high level of technical knowledge. Min Max Min Max Min Max Min Max Min Max SCH - SCH/GT Stump cutter with fixed tooth rotor. p. 024 SSL Forestry tiller with fixed tooth rotor p. 026 SSL SPEED Forestry tiller with fixed tooth rotor. p. 025 SSM - SSM/HP Forestry tiller with fixed tooth rotor. p. 027 SSH Forestry tiller with fixed tooth rotor. p. 028
Transcript
FORESTRY TILLERSFAE Forestry Tillers are suitable for deep grinding and crushing of unworked soils,stumps and roots. The mastication of stumps and the mulching of their roots, giveyou perfect land reclamation. The quality of our forestry tillers is unbeatable in terms of durability and reliability, thanks to our superior building materials and our highlevel of technical knowledge.
Min
Max
Min
Max
Min
Max
Min
Max
Min
MaxSCH - SCH/GTStump cutter with fixed tooth rotor.
p. 024
SSLForestry tiller with fixed tooth rotor
p. 026
SSL SPEEDForestry tiller with fixed tooth rotor.
p. 025
SSM - SSM/HPForestry tiller with fixed tooth rotor.
p. 027
SSHForestry tiller with fixed tooth rotor.
p. 028
0-100 HP 100-200 HP 200-300 HP 300-400 HP 400-500 HP
YOU’LL BE DIGGING DEEPER AND DEEPER
160
400
150
300
100
220
100
220
130
350
023022
The SCH is an attachment for removing single stumps.The SCH/GT is configured to handle stumps in a row pattern. Both the SCH and the SCH/GT (with the exception of the SCH/GT-75) are equipped with hydraulic side shifting allowing the operator to control position of the head without having to maneuver the tractor.
STUMP CUTTER WITH FIXED TOOTH ROTOR.
SCH - SCH/GTfrom 130 a 350 HP D60 cm
MODELTractor
(HP) PTO (rpm)
Working width(mm)
Totalwidth(mm)
Weight (kg)
Max working depth(mm)
No. teeth typeA/3 + MH
min max
SCH SS 45 ST 130 180 1000 520 1800 2000 500 30+4
SCH SS 55 DT 160 280 1000 630 1800 2700 500 34+4
SCH/GT 65 ST 140 200 1000 730 1800 2800 500 28+4
SCH/GT 65 DT 180 300 1000 730 1800 2900 500 28+4
SCH/GT 75 DT 200 350 1000 810 1280 3200 600 34+4
Hydraulic side shiftingallows the stump cutter to moveeasily, quickly, and accuratelywhile working close to plantsand crops without damagingthem
Data refers to machine as standard. The technical data in this catalog may be altered without prior notice.
STANDARD EQUIPMENT
PTO shaft with cam clutchGearbox with freewheelTransmission with belts (SCH SS 45 ST: in Poly-Chain® Carbon, SCH SS 55 DT: in XPC) Transmission with side gearbox (SCH/GT 65 and SCH/GT 75)Hydraulic side shifting (SCH/GT 75 DT excluded)Welded steel counter-bladesEnclosed machine bodyInside lateral protectionsDouble line protection chains
OPTIONS
Hydraulic top linkMultiple tooth options
Dual transmission with sidegearboxreduces rotor speed whilemaintaining power
SCH/GT version with transmissionand side gearbox to grind stump rows.↑
Transmission with belts
FORESTRY TILLERS
A Forestry Tiller designed to meet the needs ofprofessionals who require both surface clearing andsoil reclamation. This machine allows you to clean upcrop residue and grind trees and stumps up to 30 cmdiameter and 30 cm deep. The optional push frame mounts to the support roller, while adjustable counter-blades are used to manually control the final product size.
Data refers to machine as standard. The technical data in this catalog may be altered without prior notice.
OPTIONS
Hydraulic top linkPush frame - (cannot be used without roller)Hydraulic support rollerMultiple tooth options
STANDARD EQUIPMENT
Friction clutch on side PTOPTO shaft with cam clutchGearbox with freewheelTransmission with side gearboxHydraulic hoodWelded steel counter-bladesAdjustable counter-bladeEnclosed machine bodyInside lateral protectionsProtection chains
Hydraulic controlled roller(optional) helps withcompactionand working uneven terrain
Dual transmission with sidegearboxreduces rotor speed whilemaintaining power
Adjustable counter-bladefor longer working life
FORESTRY TILLERS
025024
STANDARD EQUIPMENT
Friction clutch on side PTOPTO shaft with cam clutchGearbox with freewheelTransmission with side gearboxHydraulic hoodFlat pressed welded steel counter-bladesEnclosed machine bodyInside lateral protectionsProtection chains
OPTIONS
Hydraulic top linkHydraulic controlled rollerDifferent teeth
from 100 to 220 HP Ø30 cm max D30 cm
MODELTractor
(HP) PTO (rpm)
Working width(mm)
Totalwidth(mm)
Weight (kg)
Max shredding diameter
(mm)
Max working depth(mm)
No. teeth typeB/3 + C/3/SS
min max
SSL 150 100 160 1000 1580 1880 2080 300 300 54+4
SSL 175 110 160 1000 1820 2120 2260 300 300 66+4
SSL 200 120 220 1000 2060 2360 2620 300 300 74+4
SSL 225 130 220 1000 2300 2600 2810 300 300 82+4
SSL 250 140 220 1000 2540 2840 2990 300 300 96+4
Hydraulic controlled rollerhelps with minor compactionand working uneven terrain
This is the smallest model in FAE’s line of Forestry Tillers.Thanks to its low weight and multiple working width options, the SSL fits a wide range of tractors.The transmission with side gearbox allows the rotor tospin at a lower RPM than a traditional belt driven mulcher.This makes the transmission much more reliable, andensures a deep, consistent grinding while also loweringtool wear.
FORESTRY TILLER WITH FIXED TOOTH ROTOR.
Data refers to machine as standard. The technical data in this catalog may be altered without prior notice.
Dual transmission with sidegearboxreduces rotor speed whilemaintaining power
FORESTRY TILLERS
SSL
Designed and built to work with medium to high powertractors, the SSM can grind stumps up to 50 cm diameterand run at a depth of 40 cm. It has an available HPversion for tractors up to 300 HP.
FORESTRY TILLER WITH FIXED TOOTH ROTOR.
SSM - SSM/HP
FORESTRY TILLERS
from 150 to 300 HP Ø50 cm max D40 cm
Data refers to machine as standard. The technical data in this catalog may be altered without prior notice.
Friction clutch on side PTOPTO shaft with cam clutchGearbox with freewheelTransmission with side gearboxHydraulic hoodWelded steel counter-bladesFlat pressed welded steel protection counter-bladesAdjustable hardox counter-bladeEnclosed machine bodyCentralized greasing hubHydraulic top link
Z style self ranging system of the PTO drive shaft/gearboxInside lateral protectionsBigger transmission for tractors up to 360-400 HP (SSM/HP 200, 225 and 250)Protection chains
Stronger transmission for tractors up to 360-400 HP power (SSM/HP 200, 225 and 250)
W style self aligning device between PTO drive shaft/gearboxallows the mulcher to work in several angles without damaging the PTO
OPTIONS
Adjustable counter-bladeBolted grid on rear hoodW style self aligning device between PTO drive shaft/gearboxDozing blade (not compatible with roller)Hydraulic controlled roller (not compatible with dozing blade)Multiple tooth options
027026
This is the flagship of FAE’s Forestry Tiller lineup. The wide rotor can grind stumps up to 70 cm diameter, while the highnumber of teeth guarantee the best processed material at depths up to 50 cm.The SSH is built from high quality components and is backed by years of research and newer model development. It has heavy duty, side mounted gearboxes to guarantee it has the longest working life while constantly running in the ground.
FORESTRY TILLER WITH FIXED TOOTH ROTOR.
SSH
STANDARD EQUIPMENT
Friction clutch on side PTOPTO shaft with cam clutch Gearbox with freewheelTransmission with side gearboxHydraulic hood
Z style self ranging system of the PTO drive shaft/gearbox (SSH 200, 225 and 250)
OPTIONS
Forestry counter-bladeBolted grid on rear hood (SSH 200, 225 and 250)Stronger transmission for tractors up to 360-400 HP (SSH 200, 225 and 250)*W style self aligning device between PTO drive shaft/gearboxDozing blade (not compatible with roller)Hydraulic controlled roller (not compatible with dozing blade)Multiple tooth options
