Three Easy Steps to Order a Custom Jettrim Seat Cover1. Locate the seat cover template in the Hot Products
2013 price list or visit www.HotProductsUSA.com.*2. Write the information of the colors & materials
you want on the seat cover template.3. Fax or email the completed seat cover template.*** If you are unable to find the seat cover template for your model,please contact us.** It may take 7-10 working days to get your custom seat cover afterwe receive your completed custom seat cover template.
KU250X104-AFront & Rear Top: Medium Slip Black Front Collar: Smooth Grain Worx Green Center Band and Rear: Smooth Grain Worx Green Side: Carbon Black Large Stitch: Green Thread on Top
KU250X104-BFront & Rear Top: Non Slip Suede BlackFront Collar: Smooth Grain Red Center Band & Rear: Smooth Grain Red Side: Carbon Black LargeStitch: Red Thread on Top
KU250X101-ATop: Medium Slip BlackFront Side: Smooth Grain WhiteTail Front & Spike Rear: Smooth Grain Worx GreenStitch: Green Thread on Top
KU250X104-EFront & Rear Top: Non Slip Suede BlackFront Collar, Center Band & Rear Side:
Carbon BlackStitch: Green Thread on Top
KU300LX101-AFront, Side 2 & Tail: Carbon SilverSide 1 & Rear Side: Carbon BlackTop: Carbon BlackStitch: Silver Thread on Top
Ultra 300LX
Ultra 250X/260X/300X Ultra 250X/260X/300X
STXR 12F/15F Ultra 250X/260X/300X
K15F102-ATop Front: Carbon Dark SilverTop Rear: Carbon BlackFront Side: Smooth Grain BlackSide: Smooth Grain Worx GreenRear Tail: Carbon White Stitch: Green Thread on Top
SDRXPX101-ATop: Medium Slip BlackSide: Carbon Dark SilverSpike: Disco Light OrangeRear: Small Carbon Light SilverStitch: Orange Thread on Top
SDRXPX101-BTop: Medium Slip SilverSide: Carbon BlackSpike: Rx OrangeRear: Carbon BlackStitch: Orange Thread on Top
SDRXTXIS101-AFront & Rear Top: Medium Slip YellowFront Collar: Carbon Black LGCenter Band: Carbon Black LGFront & Rear Vest: Smooth Grain SilverSide: Carbon Black LGStitch: Black Thread on Top
SDRXTXIS101-BFront and Rear Top: Non Slip BlackFront Collar: Carbon BlackCenter Band: Carbon BlackFront & Rear Backrest: Fire Red Smooth VinylSide: Ostrich Black VinylStitch: Orange Thread on Top
YFZR102-BTop: Medium Slip Black Front & Rear Side: Carbon Black LargeFront Collar & Band: Smooth Grain Light Green Rear: Smooth Grain Light Green Stitch: Bright Green Thread on Top
YFZS101-BFront: Kevlar Black Top 1: Medium Slip SilverTop 2: Smooth Grain RedRear Top: Medium Slip BlackRear Tail: Smooth Grain RedSide: Carbon Black Tail: Medium Slip BlackRear Side: Carbon Dark SilverStitch: Red Thread on Top
YFZR105-ATop Front: Medium Slip BlackTop Rear: Medium Slip SilverFront Collar: Carbon Red Center Band & Tail: Carbon Red Side & Back Rest: Smooth Grain BlackStitch: Red Thread on Top
FZR (2009-11) FZR (2012-13)
FZS (09-12)
YFZR105-BTop Front: Medium Slip BlackTop Rear: Medium Slip SilverFront Collar: Smooth Grain Light GreenCenter Band & Tail: Smooth Grain Light GreenSide & Back Rest: Smooth Grain Black Stitch: Bright Green Thread on Top
YFXSHO101-ATop Front: Medium Slip BlackTop Rear: Diamond SilverFront Collar: Diamond SilverCenter Band & Tail: Diamond SilverSide & Back Rest: Diamond BlueStitch: Blue Thread on Top
YFXC101-ATop Front: Non Slip Suede BlackTop Rear: Non Slip Suede BlackFront Collar: Non Slip Suede BlackCenter Band & Tail: Non Slip Suede BlackSide & Back Rest: Carbon SilverStitch: Silver Thread on Top
KAWASAKI Part No.800 SXR with Lifters AZ-HT68800 SXR For Use with Kicker Footholds AZ-HT68K800 SXR with Lifters & For use with AZ-HT68RCBlowsion Composite Rail Caps
YAMAHA Part No.SuperJet (96-09) with Lifters AZ-HT751SuperJet (96-09) For Use with Kicker Footholds AZ-HT751KSuperJet (96-09) For Use with Digger Footholds AZ-HT751D
HYDRO-TURF PREMIER CUSTOMORDER SEAT COVERS
AZ-SEW62
AZ-SEW74
AZ-SEW784
AZ-SEW791
AZ-SEW891
AZ-HT68 AZ-HT68RC
AZ-SEW88
AZ-SEW89
FX SHO (08-11)AZ-SEWFX1
FX Cruiser HO & FX Cruiser SHO (12)AZ-SEWFX21 FZR (09-11)
AZ-SEWFZR
FZR (12)AZ-SEWFZR1
FZS (09-12)AZ-SEWFZS
FX SHO & FX HO (12)AZ-SEWFX11
250
HYDRO-TURF MATSHydro-Turf® is a leading manufacturer of performance traction matsand seat covers. Hydro-turf offers some of the best looking, best gripping ride mats on the market. Superior traction grooves andexcellent durability are the choice for amateur and professional riderslooking to upgrade or replace their existing traction mats.
Step 1 Step 2 Step 3 Step 4HOW TO ORDER HYDRO-TURF SHEETS
GLUE DOWN EXAMPLE: SHT37-WC-2TBLK/WHT PSA EXAMPLE: SHT37-PSA-WC-2TBLK/WHT
Code AdhesiveType Pattern Color
Step 2 - Select Glue Down or Pressure Sensitive Adhesive
Glue Down Type PSA Type
Glue Down comes standard and no code is necessary.
Step 3 - Select the Pattern
Step 4 - Select the Color
STANDARD COLORS
Color: BlackCode: BLK
Color: Deep BlueCode: DB
Color: Light BlueCode: LBL
Color: Royal BlueCode: ROY
Color: Light GrayCode: LGY
Color: Dark GrayCode: DGY
Color: Lime GreenCode: LGN
Color: OrangeCode: ONG
Color: PinkCode: PK
Color: RedCode: RED
Color: YellowCode: YLW
Color: WhiteCode: WHT
Color: Black MarbleCode: BM
Color: Royal MarbleCode: RM
2-TONE COLORS
Top Color: BlackGrooves: White
Code: 2TBLK/WHT
Top Color: BlackGrooves: Dark GrayCode: 2TBLK/DGY
Top Color: BlackGrooves: Orange
Code: 2TBLK/ONG
Top Color: BlackGrooves: Lime Green
Code: 2TBLK/LGN
Top Color: BlackGrooves: Red
Code: 2TBLK/RED
Top Color: BlackGrooves: Pink
Code: 2TBLK/PK
Top Color: BlackGrooves: Royal BlueCode: 2TBLK/ROY
Top Color: BlackGrooves: Yellow
Code: 2TBLK/YLW
Top Color: Dark GrayGrooves: Black
Code: 2TDGY/BLK
Top Color: Lime GreenGrooves: Black
Code: 2TLGN/BLK
Top Color: Lime GreenGrooves: Black
Code: 2TLGN/WHT
Top Color: Royal BlueGrooves: Black
Code: 2TROY/BLK
Top Color: Royal BlueGrooves: White
Code: 2TROY/WHT
Top Color: RedGrooves: Black
Code: 2TRED/BLK
Top Color: RedGrooves: White
Code: 2TRED/WHT
Top Color: YellowGrooves: White
Code: 2TYLW/WHT
Top Color: PinkGrooves: White
Code: 2TPK/WHT
Top Color: PurpleGrooves: Yellow
Code: 2TPUR/YLW
Top Color: BlackGrooves: Light GrayCode: 2TBLK/LGY
Top Color: Light GrayGrooves: Black
Code: 2TLGY/BLK
Top Color: Light GrayGrooves: White
Code: 2TLGY/WHT
Top Color: Light GrayGrooves: Royal BlueCode: 2TLGY/ROY
Color: Snow CamoCode: SNCAM
Color: Blue CamoCode: BLCAM
Color: Swamp CamoCode: SWCAM
Color: Purple MarbleCode: PM
Color: Yellow CamoCode: YWCAM
Color: Green CamoCode: GNCAM
Color: Tan CamoCode: TNCAM
*Due to the manufacturing process forthe Hydro-Turf Waffle Cut sheets they aresupplied as two pieces.The pieces supplied for single colorsheet are:Piece #1 40” x 48”Piece #2 40” x 12”The pieces supplied for 2 tone colorsheet are:Piece #1 37” x 47”Piece #2 37” x 11”
HYDRO-TURF (GRAY) UNDERPADSize Description Color Part Number39” x 19” Underpad 5mm Gray SHTUPAD5R39” x 78” Underpad 5mm Large Sheet Gray SHTUPAD539” x 19” Underpad 8mm Gray SHTUPAD8R39” x 78” Underpad 8mm Large Sheet Gray SHTUPAD839” x 19” Underpad 25mm Gray SHTUPAD25R
HYDRO-TURF PLUSH (BLACK) UNDERPADSize Description Color Part Number48” x 17.5” Underpad 9mm Black SHTUPAD9B48” x 88” Underpad 9mm Large Sheet Black SHTUPAD948” x 17.5” Underpad 18mm Black SHTUPAD18B48” x 88” Underpad 18mm Large Sheet Black SHTUPAD18B-148” x 17.5” Underpad 26mm Black SHTUPAD26B
SHTUPAD9B SHTUPAD18B SHTUPAD26B
HYDROTURF HANDLE POLE SHOCK PADS
Description Part No.A. Kawasaki 750SX/SXI/800SXR (1) TS401B. Kawasaki JS440/550 (2) TS411C. Yamaha Super Jet (1) TS421
Protects engine hood from damage when handlepole is dropped. Color: Black only
B.
A.
C.
Description Part No.Kick Tail 5.5” x 17” x 1” Tall KICK01Kawasaki 800 SX-R Mat with 1” Kick Tail HT68K-BLKKick Tail 5.5” x 17” x 2” Tall KICK02
Extended
HT68K
KICK01
HYDRO-TURF KICK TAILAdd a kick tail to your watercraft 1” or 2” wedge. If installed under the tractionmats, some models of watercraft may require an extended mat.
KICK02
SIDE LIFTER WEDGEFor a quick and semi-permanent advantage. Great when used for racers &beginner freestylers. Provides the “wedge” you need. Color: Black Only
Description Part. No.2” x13” Black x 2 pieces TS432.5” x 24” Black x 2 pieces TS44
TS43TS022” x 15”
TS044” x 15”
HYDRO-TURF TRACTION STRIPSDescription Part No.2”x15” Traction Strips 8 pieces per package TS024”x15” Traction Strips 4 pieces per package TS04
Description Part No.Superjet Rickter Footwells FHWAMRRP Foothold Inserts RICKTER-FT-HOLDSuperjet (96-08) Mats for use HT751Fwith Wamilton “Rickter” Footwells
WAMILTON "RICKTER"FOOTWELLS
A must have for surf riding. These Wamiltonfiberglass footwells work with Hydro TurfSuperJet freestyle mats. For HT751F.
BLOWSION LUSTIC KICKER FOOTWELLS
Designed especially for all years Super Jet andthe 800 SXR, these beauties have been usedexclusively by Josh Lustic on his Blowsion prepared Factory Pro Kawi SXR 800. These custom molded fiberglass insets provide the roomin the tray of your ski for lock down aerials. ForHT68BT & HT751BF.
Description Part No.Lustic Footwell 05-03-005800 SXR Mats for use with HT68BF“Kicker” Footholds & Blowsion Rail CapsSuperjet (96-08) Mats for use HT751BFwith Blowsion “Kicker” Footholds
Description Part No.Mac Footwell 05-03-006
BLOWSION FOOTWELLS MAC MASHERS
No cutting of the wide SXR tray required. Designin conjunction with pro Kawasaki rider ChrisMacClugage and Darren Hedlund. Experience the feel of a standard footwell cut out without havingto notch out your SXR tray. 100% race legal.
HT751F*HT67F* HT68BF* HT68RC*
Kawasaki Part No.750SXI Mats for use with “Digger” Footholds HT67F*800 SXR Mats for use with “Kicker” Footholds HT68BF*and Blowsion Rail Caps800 SXR Mats for use with “Klowners” Footwells 04-02-023*and Blowsion Rail Caps800 SXR Mats with 1” kick tail for use HT68RC*with Blowsion Rail CapsBlowsion Composite Rail Caps KASRUP402
*These mats are not available with “PSA” 3M adhesive.
HT751FD* HT751BF*
HYDRO-TURF SPECIALMATS FOR YAMAHA SUPER JET
*All special mats only available in black.These mats are produced using the “Cut Groove” material.
Yamaha Part No.Super Jet (96-11) Mats for use with HT751F*Wamilton FootholdsSuper Jet (96-11) Mats for use with HT751FD*Blowsion “Digger” FootholdsSuper Jet (96-11) Mats for use with HT751BF*Blowsion “Kicker” FootholdsSuper Jet (96-11) Mats for use with 04-02-077*Blowsion “Klowners” FootwellsBumper Rail Strips/Mats for (all stand up models) TS50-BLK
*These mats are not available with “PSA” 3M adhesive.
*All special mats only available in black.These mats are produced using the “Cut Groove” material.
HYDRO-TURF SPECIALMATS FOR KAWASAKI 750 & 800
BLOWSIONDIGGER FOOTWELLS
Considered a must have modification for any surfor freerider. The Digger features a recessed“notch” at the back of each footwell to allow riderto wedge foot during tail stands & surf recoveries.For HT67F & HT751FD.
Description Part No.Dawson Diggers 05-03-004Superjet (96-08) Mats for use HT751FDwith Blowsion “Digger” Footholds750SXI Mats for use HT67Fwith Blowsion “Digger” Footholds
BLOWSIONFOOTWELLS KLOWNERS
Designed especially for the rider who needs MAXroom in the tray. These hand-laid, molded fiberglass insets provide extended room in the trayof your ski to position your feet. Comfortably sizedfor large to very large feet, the Klowner footwellscontour to your ankle and also feature a gentle protrusion over the top of your foot for better lockingpower. Built with safety and performance in mind,the Klowner footwells will keep you in your ski whileinverted, and also easily let you go when you feellike you’re going to need a hurried dismount to avoidfacial impact on fiberglass.
Description Part No.Klowners Footwell 05-03-007Super Jet (96-11) Mats for 04-02-077use with Blowsion “Klowners” Footwells800 SXR Mats for use with 04-02-023“Klowners” Footwells & Blowsion Rail Caps
05-03-006
255
FOURSTROKE
INTAKESYSTEM
SENGINE/GASKETS
EXHAUSTDRIVELINEHANDLINGDRIVE LINEHANDLING
ELECTRICALELECTRICAL
WATERLINE/BILGE
STEERING& CONTROLS
STEERING& CONTROLS
BODYBODY
ACCESSORIESACCESSORIES
SERVICE TOOLS/HARDWARE
CHEMICAL
Description Part No.Blowsion SX-R Rail Cap 05-04-001800 SXR Mats for use HT68BFwith “Kicker” Footholdsand Blowsion Rail Caps800 SXR Mats with 1” kick HT68RCtail for use with Blowsion Rail Caps
SX-R RAIL CAPSNewly re-tooled and now an even better fit! Thecomposite crew at Blowsion has made newmold sets off of Blowsion’s SXR Carbon Hullmaking these new generation SXR Rail Caps aPERFECT fit! A complex fitting piece now madewith the best fit and features available. Get rid ofthose extremely slippery factory rubber black railsand go composite.
Description Color Part No.AWD Watercraft with “Tow Hook” Black QL-01BAWD Watercraft with “Tow Hook” Yellow QL-01YAWD Watercraft with “Bow Eye” Black QL-02
A flexible tow loop is required for all watercraft of IJSBA Race. Specially designed to meetIJSBA regulations.
QL-01
QL-02
HOT PRODUCTS STAINLESSSTEEL NOSE BUSHINGS
These stainless Steel nose bushings have beendeveloped to prevent corrosion from salt water and the extra strength and durability will allow the bushings to last years longer than the alu-minum bushings. Even the nose bushing nut isstainless steel.
DescriptionYamaha AllKawasaki 89+
Part No.57-628557-6275
Yamaha57-6285
Kawasaki57-6275
BLOWSION EXTENDEDALUMINUM NOSE BUSHING
Description Part No.Clear 04-03-058Black 04-03-051
HOT PRODUCTS YAMAHA ALUMINUM NOSE BUSHING
Yamaha Part No.Silver 57-6310Black 57-6312Blue 57-6314Red 57-6316
HOT PRODUCTS 1” EXTENDED LENGTH
YAMAHA NOSE BUSHING
Yamaha Part No.Silver 57-6510Black 57-6512Blue 57-6514Red 57-6516
HOT PRODUCTS KAWASAKIALUMINUM NOSE BUSHING
Kawasaki Part No.Silver 57-6270Black 57-6272Blue 57-6274Red 57-6276
256
STORAGE COMPARTMENT& SEAT LATCH ASSEMBLY
FOR SEA-DOOEconomy replacement of plastic latch assemblyused in most Sea-Doo watercraft.
FRONT HOOD HOOKS (SX-R)Utilizing the many years of Super Jet Freestyleand surf quality hood hook design experience,these bulletproof SXR billet hood hooks allow forthe ultimate abuse of your 2003 and newer SXRon the race course, river or in big surf.
Description Part No.SX-R Hood Hooks, Black 04-04-101
FRONT HOOD HOOKS (96+SJ)Don't lose your hood again due to poor springtension with the stock hooks. Our billet aluminumhooks won't tweak or budge in even the mostextreme of conditions. Carbon grey anodized. Sold as a pair complete with stainless fasteners.
Description Part No.Superjet Hood Hooks, Black 04-04-105
BLOWSION STAINLESSHOOD LATCH ASSEMBLY
Fits all 650/750/800/X2 Kawasaki. May also beused to retro-fit all years Yamaha Superjet and FX1. Comes complete with latch assembly andhood clip. 100% polished stainless. Trick andfunctional. Why incur the factory OEMreplacement expense?
Description Part No.Blowsion Stainless Hood Latch 04-04-030
BRAPSTRAP
Strap andsecure yourhood to avoidaccidental dislodging during freestyle
and freeride maneuvers. Replaces stock latchassembly. All mounting hardware included. A mustfor extreme ocean and big wave riders. "Cinchable" strap tension means you pre-loadstrap holding power. Fits all SJ, SXR800,FX1,750sxi and Octane. EJ-Pam 2008 approved!
Description Part No.Blowsion Brap Strap 04-04-310
Description Part No.Hood Latch Black 04-04-001Hood Latch Green 04-04-004Hood Latch Red 04-04-007Hood Latch Clear 04-04-008
BILLET HOOD LATCHRecently updated and re-machined to also fit theKawasaki SXR800, SXI Pro all Yamaha Superjetand FX1.
Description Part No.Billet Hood Hooks, Black TBM109
SX-R BILLET HOOD HOOKSA direct replacement for the weak OEM SX-R 800hood latches that bend and commonly fail, thesehood latches are manufactured from 6061 billetaluminum. TBM eliminated all stress risers toensure latches will stand up to the most extremeriding conditions eliminating the chance of afailure that can lead to the hood coming loose.
ADA RACING HOOD HOOKSFOR YAMAHA SUPERJET
Billet hood hooks for the Yamaha Super Jetdesigned by freestyle guru Jeremy Parr. Instead ofthe hood sliding forward into the hooks, these faceforward so the the hood comes back into themholding the hood from coming backward.
Description Color Part No.Hood Hook Silver 34-660190Hood Hook Black 34-660100Hood Hook Blue 34-660110Hood Hook Red 34-660120
2012 HOT PRODUCTS
IJSBA WORLD FINALS
IN LAKE HAVASU CITY, ARIZONA
257
Use this composite drop in baffle insert to coverthe area removed during installation of the factorypipe dry pipe for Kawasaki 800SXR.
R&D SPACE MAKER HOOD INSERT
FOR YAMAHA SUPERJETThis insert allows you to remove a portion of thestock hood inner liner and foam, replacing it withthe Space Maker Hood Insert creating the extraclearance needed to run the SuperJet Dry Pipe.
SXR Mid Mount drop-in hand holdsfor stock hoods.*Left side mount will not fit withFactory Dry Pipe
SXR HAND HOLD KITSTANDARD MOUNT
SXR forward Mount drop-in handholds for stock hoods.
SJ96+ HAND HOLDKIT MID MOUNT
Super Jet 96+ Mid mount drop-inhand holds for stock hoods.
HAND HOLD KIT "Q" HOLD MOUNT
Universal mount drop-in hand holdsare easily located on any flat surface.
Part No. 05-04-213 Part No. 05-04-214 Part No. 05-04-271 Part No. 05-04-203
WATCON YAMAHASUPERJET & OCTANE
HOOD SEALReplace your hood seal with our updated version.The self adhesive seal is much thicker and wider,which keeps the hood intact during the wide-opensurf rides and big wave action. We supply appx.110” of material, as this is enough for a 1994-2013Superjet & 2002-2004 Polaris Octane. Thismaterial may also be used in other applications.
Description Part. No.Superjet Octane Hood Seal OCT-HS
The easy solution to water slamming its way intoyour OEM SXR hood. This trick block-off kit willallow you to stop ingression of water into theengine compartment, thus limiting the damagecaused by racing in rough conditions, wave jumping, submarines, etc. Trick and simple!
Description Part No.800 SX-R Intake Block-Off 04-04-401
Yamaha Part No.Low Profile Black 04-03-151Low Profile Blue 04-03-152Low Profile Green 04-03-154Low Profile Orange 04-03-155Low Profile Red 04-03-157Low Profile Clear 04-03-158
TBM RACING BILLET YAMAHA GAS CAP
Yamaha Part No.Black TBM105-Y-BLKBlue TBM105-Y-BLU
BLOWSION BILLET KAWASAKI FUEL CAPS
Kawasaki Part No.Black 04-03-101Blue 04-03-102Green 04-03-104Orange 04-03-105Red 04-03-107Clear 04-03-108
TBM RACING BILLET KAWASAKI GAS CAP
Kawasaki Part No.Black TBM105-BGreen TBM105-GRed TBM105-R
ADA RACING BILLET KAWASAKI GAS CAP
Kawasaki Part No.Silver 31-451090Black 31-451000Blue 31-451010Green 31-451035Red 31-451020
ADA RACING BILLET YAMAHA GAS CAP
Yamaha Part No.Silver 34-451090Black 34-451000Blue 34-451010Red 34-451020
ADA RACING BILLETFUEL CAP SOCKET
Billet aluminum fuel cap socket for theYamaha Super Jet, WaveBlaster, & WaveRaider or Kawasaki 800 SX-R, 12/15F, STX-R, 1100ZXI & 900 STX. Works with the stock plastic or aftermarket billet gascaps. Includes attached chain.
Description Color Part No.Yamaha Fuel Socket Black 34-450100Yamaha Fuel Socket Silver 34-450190Kawasaki Fuel Socket Black 31-450100Kawasaki Fuel Socket Silver 31-450190
YAMAHA STAND UP Part No.Super Jet 700 (96-13) YMH04003Super Jet 650 (90-03), Super Jet 700 (94-95) YMH04009
PREMIUM PWC COVERS
HYDRO-TURFSPLASH GUARDS
Description Part No.Hydro-Turf Splash Guard 57-7035(5.5” x 40”) Rivets Included
JETTRIM SPLASH GUARDS
57-7032Flame Design
Description Part No.Small • 52” Length For two seat PWC 57-7029Large • 60” Length For three seat PWC 57-7030Large • 58” Length FLAME DESIGN For three seat PWC 57-7032
TBM RACE BUMPERSIntroducing the easiest way to enhance the handling of your SX-R simply by replacing your stock bumper with our adhesive backed bumpers.These eliminate the need for rivets and narrows the bond flange increasing the lean angle of your ski. They also enhance the generalappearance significantly.
Description Part No.800SXR TBM117STXR, 12F, 15F, ULTRA 250X/LX TBM117-STXR/ULTRAHydrospace TBM117-HS
WATCON SIDE MOLDING BUMPER KIT
Description Part No.Stand-up Molding Kit OCT-SM1Runabout Molding Kit (28 ft long) OCT-SM2
BLUE & BLACK YELLOW & BLACK REAL CHROME & BLACK
RED & BLACK YELLOW & PURPLE WHITE & BLACK
BURGUNDY & BLACK YELLOW & RED SILVER & BLACK
262
SOLID BLACK SOLID RED
BLK350EC RED350EC
GRN350EC
Series305 ECSame font as our series320 except no outline. Solid body color.
WHI350EC
BLK200EC
WHI200EC
Series200 ECEconomical one colorkits with great style andsolid color.
BROWN & BLACK BLUE & BLACK REAL CHROME & BLACK
FOREST GREEN & BLACK RED & BLACK WHITE & BLACK
SILVER & BLACK YELLOW & BLACK BURGUNDY & BLACK
Factory Matched Number Kits that resist fuel, fading and scratches.UV coated for shine and protection from the sun. Includes 4 sets of A-Z, 0-9. Total of 146 decals. Size 3” letters.
Series 300
Series 320
The first and still thebest Factory MatchedCarbon Fiber lookmade.
Solid body with noshading and a con-trasting outline withdrop shadow in ourpopular block font.
Series 200The original and still the most popular.Outline color shadesinto body color for that custom airbrushed look.
BLACK & SILVER BROWN & BLACK REAL GOLD GLITTER & BLACK
ORANGE RED & BLACK RED & BLACK SEA FOAM GREEN & BLACK
SILVER & BLACK REAL SILVER GLITTER & BLACK GREEN & BLACK
AQUA PERFORMANCE “AQUA STEPS”The spring-loaded stainless steel step stays in the upward position untilneeded for added safety benefits. The step features a soft marine foamcovering for your non-slip protection and grip. It comes completelyassembled with all stainless steel hardware.
