Par t Number :66005 (CAN Bus Mode l s )

66007 (J1850 Mode l s )

INSTALLATION GUIDEINCLUDES iOS & ANDROID INSTRUCT IONS

Download Fuelpak FP3 App1

fuelpak.vanceandhines.com/download/

Softail Models connector location is under the seat.

Sportster Models connector location is under the left hand side cover.

Dyna Models connector location is under the left hand side cover.

Touring Models (2008+) connector location is under the left hand side cover.

Locate connector on your motorcycle2

Touring Models (2007) connector location is under the right hand side cover.

3

Softail Models connector location is under the seat.

Sportster Models connector location is under the left hand side cover.

Dyna Models connector location is under the left hand side cover.

Touring Models (2008+) connector location is under the left hand side cover.

Touring Models (2007) connector location is under the right hand side cover.

After a couple seconds, the LED will be fl ashing.

Turn Ignition to the “on” position & handlebar switch to “run.”(Do not start engine)

Connector from FP3 unit

Connector from bike

3 Identify the 6-PIN CAN Bus / 4-PIN J1850 connector and plug-in your Fuelpak device

6-PIN (CAN Bus Models)

Connector from FP3 unit

Connector from bike

4-PIN (J1850 Models)

ANDROID GUIDE

FOR iOS INSTRUCT IONS TURN TO PAGE 8

5

Select Fuelpak FP3 App Select Bluetooth to enable prompts

FP3 Application will find nearest unlinked FP3 and pair with that device. Verify

that the last 6 digits coincide with your vehicle’s last digits in the VIN. Select OK to confirm passkey when prompted. When paired successfully, system will show ready

and redirect to Main Menu.

Confirm connectivity Select Yes to start Bluetooth pairing

7

Now begin the Map Lookup process to search for the Fuelpak FP3 map for your

motorcycle. The fi rst time you fl ash a map to your ECU, the Fuelpak FP3 will be

permanently married to that “VIN” number.

Confi rm connectivity Map Lookup Flash Map

iOS GUIDE

FOR ANDROID INSTRUCT IONS TURN TO PAGE 4

9

Select Settings Icon Select Bluetooth under the Settings menu

Ensure the Bluetooth toggle switch is in the “on” position. Then select the

device label “VIN” ending with the last 6 digits of your motorcycle’s VIN number.

“Connected” will appear on the right side once the device has successfully paired

with the Fuelpak FP3.

Open the Fuelpak FP3 Application.

Turn on Bluetooth and connect Start the Fuelpak FP3 App

11

Open the Fuelpak FP3 Application. Ensure Bluetooth is connected and your device has an active internet connection.

Now begin the Map Lookup processto search for the Fuelpak FP3 map

for your motorcycle. The fi rst time you fl ash a map to your ECU, the Fuelpak

FP3 will be permanently married to that “VIN” number.

Start the Fuelpak FP3 App Confi rm connectivity Map Lookup

•Smartphone App User Interface (iOS and Android) •Recalibrates ECM by Flash Tuning•Autotune Feature for Added Tuning Precision •Capable to Display Live Sensor Data

EMISSIONS NOTICE:FUELPAK IS INTENDED FOR RACING USE ONLY, AND IS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON POLLUTION-CONTROLLED VEHICLES.Made for iPhone® 5, iPhone 5S, iPhone 6, iPhone 6 Plus, iPhone 6S Plus Made for iPad™ Mini 2, iPad Air® 2, iPad Mini 4, iPad Pro™ Made for iPod Touch® (5th Generation)

“Made for iPod,” and “Made for iPhone,” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

Android is a trademark of Google Inc.