16
Frabopress 316 Securfrabo V Specificaon page 1 SPECIFICATION FRABOPRESS 316 SECURFRABO V STAINLESS STEEL PRESS FITTINGS WITH V PROFILE
Frabopress 316 Securfrabo V Specification
page 1
SPECIFICATION
FRABOPRESS 316 SECURFRABO VSTAINLESS STEEL PRESS FITTINGS WITH V PROFILE
Frabopress 316 Securfrabo V Specification
SPECIFICATION: FRABOPRESS 316 SECURFRABO V
INDEX
1. Description of FRABOPRESS 316 SECURFRABO V SYSTEM page. 3
2. Fittings page. 42.1 Elbows and bends page. 42.2 Tee fittings page. 62.3 Couplings page. 82.4 Straight unions page. 102.5 Stop ends page. 112.6 Flange adapter page. 122.7 Sealing element page. 12
3. Pipes page. 133.1 Pipes 1.4404 page. 133.2 Crossover and elbows page. 13
page 2
Frabopress 316 Securfrabo V Specification
1.DESCRIPTION OF FRABOPRESS 316 SECURFRABO SYSTEM
FRABOPRESS 316 SECURFRABO is a system made of pipes and fittings in stainless steel, material type 1.4401 (AISI 316L), complying with the requirements of UNI 11179 Class 1 standard, equipped with a cylindrical guide for the correct and safe insertion of the pipe and a preassembled elastomeric sealing element in black EPDM complying with UNI EN 681-1 standard.
FRABOPRESS 316 SECURFRABO fittings are equipped with the SECURFRABO safety system, whose functionality is tested in accordance with the DWGW W 534 work sheet (Point 12.14 - Fittings with controlled leakage), which allows any un-pressed fittings to be detected. During leakage tests with water, Securfrabo system guarantees the identification of un-pressed connection in the pressure range from 1 bar to 6.5 bar.
The pressing of the fittings is to be carried out with a suitable tool and with a correctly maintained pressing jaw, so as to achieve an indissoluble cold junction, resistant to torsion, and a hydraulic seal guaranteed by the O-ring. The right junction of Frabo fittings guarantees the use of the system considering a maximum temperature of 110 ° C, a minimum temperature of -10 ° C and a maximum pressure of 16 bar (conditions related to the transport of water).
All the components of the FRABOPRESS 316 SECURFRABO system comply with the D.M. 174-04 for use in sanitary water systems.
FRABOPRESS 316 SECURFRABO system can be used for the following applications:
- Sanitary water circuit systems- Drinking water circuit systems- Heating and cooling circuit systems- Oil free compressed air circuit systems (residual oil <5 mg/m³) - Compressed air circuit systems (residual oil >5 mg/m3)**- Fire prevention systems according to UNI 10779*- Sprinkler units according to UNI 12845*- Solar circuit systems**- Rainwater installations- Low pressure steam systems- Inert technical gas distribution systems ***- Naval plants***
* Sprinkler fire-fighting systems. Please contact our technical department for further information regarding fire protection applications
** for this application GREEN FKM O-RING must be used
*** Please contact our technical department for further information
Temperature and pressure for each application are available on Frabo technical documents www.frabo.com
For uses other than those mentioned thus far, please contact the FRABO technical support office.
page 3
Frabopress 316 Securfrabo V Specification
Pipes available for FRABOPRESS 316 SECURFRABO system are:
- Pipes made of austenitic AISI 316 stainless steel - X2 CrNiMo 17-12-2 - Material number 14404 (EN 10088 standard) according to the specifications of the work sheet DVGW - GW541 (Stainless steel pipes for drinking water systems) and EN 10312 standard.
2.FITTINGS
2.1 Elbows and bends
Frabo elbow with press ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Elbow 90° MF, Frabopress 316 Securfrabo, Model ZX000115182228354254
Elbow 90° FF, Frabopress 316 Securfrabo, Model ZX000215182228354254
Elbow 45° FF, Frabopress 316 Securfrabo, Model ZX004115182228354254
page 4
Frabopress 316 Securfrabo V Specification
Elbow 45° MF, Frabopress 316 Securfrabo, Model ZX004015182228354254
Frabo elbow with pressed end and threaded end for hexagonal key, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests. Thread is made in accordance with EN 10226-1.
Female elbow 90°, Rp thread, Frabopress 316 Securfrabo, Model ZXF90L1/2x151/2x181/2x223/4x221x281.1/4x35
Female elbow 90°, R thread, Frabopress 316 Securfrabo, Model ZXF92L 1/2x151/2x181/2x223/4x221x281.1/4x351.1/2x422x54
page 5
Frabopress 316 Securfrabo V Specification
Frabo bend with pressed end and threaded end, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests. Thread is made in accordance with EN 10226-1.
Female elbow, Rp thread, Frabopress 316 Securfrabo, Model ZX0F90 1/2x151/2x181/2x223/4x223/4x281x28
Female elbow with flange, Rp thread, Frabopress 316 Securfrabo, Model ZXF472 1/2x151/2x181/2x223/4x221x28
2.2 Tee fittings
Frabo tee fittings with press ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Female tee fitting, Frabopress 316 Securfrabo, Model ZX0130 15x15x1518x18x1822x22x2228x28x2835x35x3542x42x4254x54x54
page 6
Frabopress 316 Securfrabo V Specification
Female tee fitting, Frabopress 316 Securfrabo, Model ZX013118x15x1518x15x1822x15x2222x18x2228x22x2228x15x2828x18x2828x22x2835x15x3535x18x3535x22x3535x28x3542x18x4242x22x4242x28x4242x35x4254x18x5454x22x5454x28x5454x35x5454x42x54
Frabo tee fitting with pressed end and threaded end, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests. Thread is made in accordance with EN 10226-1.
Female tee fitting, Rp thread, Frabopress 316 Securfrabo, Model ZXF130 1/2x151/2x181/2x221/2x281/2x351/2x421/2x543/4x183/4x223/4x283/4x353/4x423/4x541x281.1/4x351.1/2x422x54
page 7
Frabopress 316 Securfrabo V Specification
2.3 Couplings
Frabo coupling with pressed end and threaded end, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests. Thread is made in accordance with EN 10226-1.
Female coupling, Rp thread, Frabopress 316 Securfrabo, Model ZXF270 1/2x151/2x181/2x223/4x183/4x223/4x281x221x281x351.1/4x351.1/2x422x54
Female coupling, R thread, Frabopress 316 Securfrabo, Model ZXF243 1/2x151/2x181/2x223/4x183/4x223/4x281x221x281x351.1/4x351.1/2x422x54
Frabo coupling with stop and pressed ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Coupling with stop FF, Frabopress 316 Securfrabo, Model ZX027015182228354254
page 8
Frabopress 316 Securfrabo V Specification
Frabo slip coupling with pressed ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Slip coupling FF, Frabopress 316 Securfrabo, Model ZX027115182228354254
Frabo fitting reducer with pressed ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Fitting reducer MF, Frabopress 316 Securfrabo, Model ZX024318x1522x1522x1828x1528x1828x2235x1835x2235x2842x1842x2242x2842x3554x2254x2854x3554x42
page 9
Frabopress 316 Securfrabo V Specification
2.4 Straight Unions
Frabo straight union with pressed ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Straight union FF with flat joint, Frabopress 316 Securfrabo, Model ZX034015182228354254
Frabo straight union with pressed end and threaded end, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Female straight union with flat joint, R thread, Frabopress 316 Securfrabo, Model ZXF341 1/2x151/2x181/2x223/4x153/4x183/4x221x221x281.1/4x351.1/2x422x54
page 10
Frabopress 316 Securfrabo V Specification
Female straight union with swivel nut and flat seat, G thread, Frabopress 316 Securfrabo, Model ZXF359 1/2x153/4x153/4x183/4x221x221.1/4x281.1/2X351.3/4x422x422.3/8x542.1/2x54
2.5 Stop ends
Frabo stop end with pressed ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
Female stop end, Frabopress 316 Securfrabo, Model ZX030215182228354254
page 11
Frabopress 316 Securfrabo V Specification
2.7 Flange adapter
Frabo flange adapter PN16 with pressed ends, Frabopress 316 Securfrabo model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element (maximum pressure 10/16 bar depending on the application). The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. The fitting is equipped with SECURFRABO safety system, which allows any un-pressed fitting to be detected during the leakage tests.
PN16 Flange adapter with F press connection, Frabopress 316 Securfrabo, Model ZX027322 (DN20)28 (DN25)35 (DN32)42 (DN40)54 (DN50)
2.7 Sealing elements
EPDM O-ring, maximum operating temperature 110 ° C, minimum -10 ° C. Equipped with SECURFRABO system for identifying un-pressed ends already during the leakage tests.
EPDM O-ring EPDM for Frabopress 316 Securfrabo fittings, Model SECUR00 (Ø fitting)15182228354254
page 12
Frabopress 316 Securfrabo V Specification
3.PIPES
3.1 Pipe 1.4404
FRABOPRESS 316 SECURFRABO pipes are thin-walled welded pipes made in AISI 316L austenitic stainless steel (material 1.4404) marked according to EN 10312 standard and DVGW GW 541 worksheet. Available in 6m long bars. 3m long bars are available on request.
Pipe in AISI316L stainless steel, Model AXTB0015182228354254
3.2 Crossover and elbows
Crossover and elbow, model FRABOPRESS 316 SECURFRABO, made of thin-walled welded pipes in AISI 316L austenitic stainless steel (material 1.4404), according to EN 10312.
Short crossover, Frabopress 316 Secufrabo, Model ZX008415182228
Long crossover, Frabopress 316 Secufrabo, Model ZX008715182228
Elbow 15°, Frabopress 316 Secufrabo, Model ZX001515182228354254
page 13
Frabopress 316 Securfrabo V Specification
Elbow 30°, Frabopress 316 Secufrabo, Model ZX003015182228354254
Elbow 45°, Frabopress 316 Secufrabo, Model ZX004515182228354254
Elbow 60°, Frabopress 316 Secufrabo, Model ZX006015182228354254
Elbow 75°, Frabopress 316 Secufrabo, Model ZX007515182228354254
Elbow 90°, Frabopress 316 Secufrabo, Model ZX009015182228354254
page 14
FRA.BO S.p.A.
Via Cadorna, 30 - 25027 Quinzano d’Oglio (BS) Italy
HEADQUARTERMANUFACTURING UNIT Via Circonvallazione, 7- 26020 Bordolano (CR) - ItalyT +39 030 99 25 711 F +39 030 99 24 127 @ [email protected] W
Frabopress 316 Securfrabo V Specification
page 15
