GEN.0000000005175 Rev B 2016 SRAM, LLC

2017 Road Frame Fit

Specifi cations

2

Table of ContentsElectronic ShiftersSRAM RED eTap BlipBox

Wireless Shifter Dimensions ....................... 3

SRAM RED eTap BlipBoxWireless Shifter with Connectors .............. 4

SRAM RED eTap BlipBoxMounting Specifications .............................. 5

SRAM RED eTap BlipsRemote Shift Buttons and Connector Dimensions ...................................................... 6

SRAM RED eTap BlipBox and BlipsInternal Mounting Specifications ................7

SRAM RED eTap BlipClamp and BlipGripRemote Shifter Mounting ............................. 8

SRAM RED eTap ClicsExtension Shift Buttons ................................ 9

SRAM RED eTap Shift/Brake LeversRemote Shifter Connections .....................10

Electronic Front DerailleurSRAM RED eTap

Front Derailleur Dimensions ...................... 12

SRAM RED eTapFrame Compatiblity Including Chainstay Information...................................................... 13

SRAM RED eTapFront Derailleur Cage Alignment .............. 14

SRAM RED eTapFront Derailleur Position with Clamp Adapter ............................................................15

SRAM RED eTapFront Derailleur Clearance .........................16

SRAM RED eTapBraze-on Hanger Dimensions ................... 17

2x11 Front DerailleursSRAM RED/ SRAM Force/ SRAM Rival/ S-390

Frame Compatiblity Including Chainstay Information......................................................19

SRAM RED/ SRAM Force/ SRAM Rival/ S-390

Front Derailleur Cage Alignment .............20

SRAM RED/ SRAM Force/ SRAM Rival/ S-390

Front Derailleur Position with Clamp Adapter ............................................................21

SRAM RED/ SRAM Force/ SRAM Rival/ S-390

Front Derailleur Clearance ........................22

SRAM RED/ SRAM Force/ SRAM Rival/ S-390

Braze-on Hanger Dimensions ..................23

2x10 Front DerailleursSRAM Apex

Frame Compatiblity Including Chainstay Information.....................................................25

SRAM ApexFront Derailleur Cage Alignment .............26

SRAM ApexFront Derailleur Position with Clamp Adapter ........................................................... 27

SRAM ApexFront Derailleur Clearance ........................28

SRAM ApexBraze-on Hanger Dimensions ..................29

3

135 mm OLD CompatibilityInformation on 2x11 Wide Axle Cranksets for 135 OLD .........................................................30

2x11 Wide Axle Cranks for 135 OLD Compatibility

Front Derailleur Position with Clamp Adapter and Braze-on..................................................31

SRAM Rival/S552 Wide AxleCrankset Frame Clearance Information 32

S902/S952 Wide AxleCrankset Frame Clearance Information 33

Chainstay ClearanceChainstay Clearance - 1x11 & 2x11

Chainstay Clearance ..................................35

Rear Derailleurs2x11 SRAM RED/ SRAM Force/ SRAM Rival 1x11 SRAM Force 1 / SRAM Rival 1 / SRAM

Apex 12x10 SRAM Apex

2x11 CranksetsSRAM RED

Crankset Frame Clearance ........................ 41

SRAM Force/SRAM RED Quarq Power Meters/ Quarq Prime Carbon Power Ready/S902/S952

Crankset Frame Clearance .......................42

SRAM Rival/ Quarq Prime Aluminum Power Ready/ S-552

Crankset Frame Clearance ....................... 43

S-390Crankset Frame Clearance .......................44

Quarq DZero Platform Power MetersPower Meter Spider Frame Clearance...45

1X CranksetsSRAM Force 1

Crankset Frame Clearance ....................... 47

SRAM Rival 1Crankset Frame Clearance .......................48

SRAM Apex 1Crankset Frame Clearance .......................49

S350-1Crankset Frame Clearance .......................50

4

2x10and 1x1 CranksetsSRAM Rival OCT with PowerGlide Chainrings

Crankset Frame Clearance .......................52

S901/S951 Yaw CompatibleCrankset Frame Clearance .......................53

S900/S950 with PowerGlide ChainringsCrankset Frame Clearance .......................54

S500/S550 with PowerGlide ChainringsCrankset Frame Clearance .......................55

SRAM Apex/ELITA/S300/S350 with PowerGlide Chainrings

Crankset Frame Clearance .......................56

Touro/S100/S150 with PowerGlide ChainringsCrankset Frame Clearance ....................... 57

ISOFLOW with PowerGlide ChainringsCrankset Frame Clearance .......................58

OMNIUMCrankset Frame Clearance .......................59

Bottom BracketsPressFit GXP

86.5 mm Road Symmetric Shell Specifications ................................................61

PressFit 30BB Shell Specification ......................... 62-64

GXP English/ GXP Italian/ Power SplineBB Shell Specifications ..............................65

BrakesSRAM RED eTap HRD/ SRAM RED HRD/ SRAM Force HRD/ SRAM Rival HRD/ SRAM Apex HRD/ S-700 HRD

Road Hydraulic Disc Brake Safety Guidelines for Rotor Size and Brake Pad Material ...68

SRAM RED HRD/ SRAM Force HRD/ SRAM Rival HRD/ SRAM Apex HRD/ S-700 HRD

Disc Brake Hose Length Specification ..69

SRAM RED eTap HRDDisc Brake Hose Length Measurement.. 70

SRAM RED eTap HRD/ SRAM RED HRD/ SRAM Force HRD/SRAM Rival HRD/ SRAM Apex HRD/ S-700 HRD

Post Mount Frame/Fork Specification ...71-72SRAM RED eTap HRD/ SRAM RED HRD/ SRAM Force HRD/ SRAM Rival HRD/ SRAM Apex HRD

Flat Mount Caliper Fork Specification... 73-75SRAM RED eTap HRD/ SRAM RED HRD/ SRAM Force HRD/ SRAM Rival HRD/ SRAM Apex HRD/ S-700 HRD/ BB7/ BB5

Spoke Clearance ......................................... 76

BB7/ BB5 RoadMechanical Disc Brake Clearance .......... 77

SRAM RED eTap/ SRAM RED/ SRAM Force/ SRAM Rival/SRAM Apex/ S-700/ S-500

Rim Brake Caliper Design Dimensions .. 78SRAM RED eTap/ SRAM RED/ SRAM Force/ SRAM Rival/ SRAM Apex/ S-700/ S-500

Rim Brake Caliper Design Dimensions .. 79

SINGLE DIGITCable Link/Noodle/Boot .............................81

Shorty UltimateDual Mounted Brake Caliper ....................82

Shorty 6/ Shorty 4Cable Carrier and Straddle Cable Length.. 83

Mechanical Brake Compatibility

5

Wheels and HubsZipp Wheels

Rim/Disc Design Parameters ....................86

Driver and Wheel Standard- RoadDriver and Wheel Standard- Road

Continued ......................................................88

Zipp Disc Brake HubsFront Hub Specifications ...........................89

Zipp Rim Brake HubsFront Hub Specifications ...........................90

Zipp Disc Brake HubsRear Hub Specifications .............................91

Zipp Rim Brake HubsRear Hub Specifications ............................92

Maxle Ultimate

Front MaxleFork Specification ........................................94

Rear MaxleFrame Specification ....................................95

Rear MaxleFrame Specification ....................................96

General Notes

All dimensions are in millimeters unless otherwise noted.

Images in this document are not to scale.

Your product's appearance may vary slightly from the images in this document.

Information in this document is subject to change without prior notice.

If you have any questions please contact your SRAM representative.

2

Electronic Shifters

3

SRAM RED eTap BlipBoxWireless Shifter Dimensions

61.5 mm

40.6 mm

Back (Battery/Mount)SideFront (Button side)

NOTES

1 Button access needed for pairing and adjustment of the derailleurs.

1

18 mm

4

SRAM RED eTap BlipBoxWireless Shifter with Connectors

72 mm

18 mm

1

2

NOTES

1 Allow sufficient space for shifter, connector length, and wire minimum bend radius in desired mounting location.

2 Wire miniumum bend radius is 10 mm.

5

SRAM RED eTap BlipBoxMounting Specifications

90 Lock mount

Threaded direct mount

M4x0.7 thread pitch, 4.6 mm depth

1 4

NOTES

1 Consider additional clearance for 90 lock mount.

2 Cable connections can be made after mounting with proper port access.

3 Button access is only needed for setup.

4 90 mount is compatible with all SRAM/Zipp Quickview mounts.

5 BlipBox must be mounted externally on the bike to maintain integrity of the wireless signal. For internal mounting specifications, see page 7.

6

SRAM RED eTap BlipsRemote Shift Buttons and Connector Dimensions

2.5 mm wire diameter

5.0 mm connector diameter

Left shift button Right shift button

Wire lengths150 mm230 mm450 mm650 mm

1

1

2

31.35 mm

NOTES

1 Consider the connector diameter and wire length when routing wires internally.

2 Choose the wire lengths based on application and desired location of the Blips.

7

SRAM RED eTap BlipBox and BlipsInternal Mounting Specifications

1 2

Side A Side B

100 mm100 mm

NOTES

1 Internally mounted shifter setup requires the Blip wires to be routed external of bar, stem, and frame materials a minimum of 100 mm per side.

2 Routing under bar tape is acceptable within the 100 mm length.

8

SRAM RED eTap BlipClamp and BlipGripRemote Shifter Mounting

1

2

NOTES

1 Button holder designed for 31.8 mm bar mounting.

2 Direct mount under the handlebar tape for 22.2 mm through 35 mm