1 THE COMPANY ORMAMACCHINE, leading Italian factory specialized in the production of automatic pressing plants for: wood, PU sandwich panels, composite materials, plastic, rubber and metal. With a production capacity of 900 plants/year, 150 employees and 5 production units (all located in Italy), and 40 years experience, Ormamacchine grants an high professionality, competence and experience. With its production units integrated network, R&D laboratories and service centres, Ormamacchine fulfill its customer needs with high efficiency with high performance products in different fields. OUR CONTACTS ORMAMACCHINE SPA VIALE LOMBARDIA 47 TORRE BOLDONE (BG) ITALY TEL +39 035 364011 - FAX +39 035 346290 E-MAIL: [email protected]- WEBSITE: www.ormamacchine.it
Transcript
1
THE COMPANY
ORMAMACCHINE, leading Italian factory specialized in the production of automatic pressing plants for: wood, PU sandwich panels, composite materials, plastic, rubber and metal.
With a production capacity of 900 plants/year, 150 employees and 5 production units (all located in Italy), and 40 years experience, Ormamacchine grants an high professionality, competence and experience.
With its production units integrated network, R&D laboratories and service centres, Ormamacchine fulfill its customer needs with high efficiency with high performance products in different fields.
Ormamacchine frame press basic model is this one named: FUTURA ECOMain Features
Working manual cycle with movement of beams and shoulder through pushbuttons
Vertical pistons: 2 diam. 90 mm
Horizontal pistons: 2 diam. 65 mm
Possibility to adjust the vertical and horizontal pressure independently
Main option on demand
Variable pitch shutter grid
Top beam, botton beam and shoulders covered by plastic
Preassembling device tilting by sensor
5
FUTURA
FUTURA is the automatic version of the FUTURA/ECO frame pressMain Features
Automatic working cycle
Touch screen keyboard with the possibility of setting the following parameters: working cycle selection among the 4 available pressing time vertical and horizontal pressure vertical and horizontal opening during and after the cycle electrical problems warnings foot pedal suitable for step by step working (only vertical movement)
Main option on demand
Variable pitch shutter grid Top beam, bottom beam and shoulders covered by plastic Preassembling device tilting by sensor Foot pedal suitable for step by step working (only vertical movement) Extra horizontal beam (complete of piston and shoulder)
6
FUTURA CNC Eco
The cheapest version of Orma computerised numeric control frame press is the FUTURA CNC EcoMain Features
Working automatic cylce with frame dimension control Touch screen keyboard with integrated PLC for the following parameter setting: Frame dimension Pressing time Vertical and horizontal pressure Horizontal and vertical opening during and at the end of the working cycle. Electric failure warnings Foot pedal for automatic cycle start
Main option on demand
Variable pitch shutter grid Top beam, bottom beam and shoulders covered by plastic Preassembling device tilting by sensor Foot pedal suitable for step by step working (only vertical movement) Extra horizontal beam (complete of piston and shoulder) Set of jigs for pre-finished frames Possibility to be connected to receive data from Ethernet
7
FUTURA CNC
FUTURA CNC is the top of the Orma frame press range
Main Features
Touch screen PROFACE control console Ability to interface via Ethernet with a standard personal computer for data import work (csv files). Full automatic positioning to the working dimension by axis control Possibility to store up to 99 working recipes Each recipe allows to set the following parameters: frame dimension - pressing time - pressure - number of pieces to be processed Foot pedal for automatic cycle start
Main option on demand
Top beam, bottom beam and shoulders covered by anti-adhesive material Preassembling device tilting by sensor Lower beam automatic movement Extra horizontal bar with piston and shoulder automatic movement Set of jigs for pre-finished frames
8
SPECIAL APPLICATIONSStarting from the cooperation with our customers, ORMAMACCHINE builds a range of
FUTURA specifically born for particular type of jobs. Some example
FUTURA Horizontal suitable to assemble frames FUTURA suitable to work bothhaving some part in aluminum horizontally and vertically
FUTURA suitable to assemble kitchen doors and FUTURA suitable to assemeble frames and produce small quantity of edge-glued boards
9
SPECIAL APPLICATIONSStarting from the cooperation with our customers, ORMAMACCHINE builds a range of
FUTURA specifically born for particular type of jobs. Some example
FUTURA designed and build for special type of assembling in need of very high pressure
10
FUTURA CNC EVOLUTION
This working centre, born according to the most update studies giving tightness guarantee to cylindrical dowel coupling but can be easily modified, customized and in some case simplified for other types of coupling like: slot/tenon (close/open/through/heel junction), 45° junction with mini-zinken or other mix solutions.
This working centre, born according to the most update studies giving tightness guarantee to cylindrical dowel coupling but can be easily modified, customized and in some case simplified for other types of coupling like: slot/tenon (close/open/through/heel junction), 45° junction with mini-zinken or other mix solutions.
11
FUTURA CNC EVOLUTION
The work island is composed by:Positioning and profiling line connecting station
FUTURA CNC hydraulic frame press complete of unloading systemAnthropomorfous robot
Glue spreader plus dowel inserting machineQuality control station
It is possible to process frames having one intermediate both vertical or horizontal piece
The work island by means of dedicated software receives all data concerning the profiling of the pieces, directly by the production department.
The “FUTURA EVOLUTION” system may be implemented with automatic control devices through dimensional, quality and shape tridimensional view of the profiled
pieces.
12
TECHNICAL FEATURES
TYPE OF FRAME PRESS FUTURA 30/17 FUTURA 30/20 FUTURA 35/20 FUTURA 35/25
MAX. USEFUL DIMENSION 3000X1700 3000X2000 3500X2000 35000X2500 MM
