Date post: | 02-Jan-2016 |
Category: |
Documents |
Upload: | dwayne-mccarthy |
View: | 221 times |
Download: | 0 times |
Freely available crystallographic software for powder diffraction.
L. M. D. Cranswick, CCP14 (Collaborative Computation Project No 14 for
Single Crystal and Powder Diffraction)
Department of Crystallography;
Birkbeck College, University of London,
Malet Street, Bloomsbury, London, WC1E 7HX, UK.
E-mail: [email protected]
WWW: http://www.ccp14.ac.uk
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 2
Notes Free Zone - they are on the web
http://www.ccp14.ac.uk/poster-talks/korea_2002/
• Some areas of this talk may resemble a rather fast computer slide show; thus detailed notes are on the web for examination at your leisure (and given out during the talk)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 3
Talk Aims• Show there is a variety of freely
available software out there that can help you with your research via diffraction and crystallographic methods
• Making use of the latest software can make your difficult problems easier or doable.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 4
For those new to Crystallography
• Why bother looking into freely available crystallographic software?
• Crystallography can help answer questions that may not seem very crystallographic at the time.
• In the following screen images, help determine, using diffraction techniques, whether there is Oxygen in the Earth’s outer core.(unit cell volumes to obtain equations of state - EOS)
“O2 volumes at high pressure from KClO4 decomposition: D" as a siderophile element pump instead of a lid on the core.” D. Walker, S.M. Clark, L.M.D. Cranswick, M.C. Johnson and R.L. Jones, (2002), Geochemistry, Geophysics, Geosystems (G^3), in press.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 5
Using the right crystallographic method can make the difference!Using Le Bail fitting / RietveldUsing Traditional UNIT CELL refinement Methods
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 6
The risks of “not knowing what you don’t know”
Thus this talk will try and get the keywords out that you can follow-up on at your leisure.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 7
Why bother knowing about a variety of modern software? (1 of 2)
Path of Most Resistance?
Using a variety of “state-of-the-art” tools can improve versatility by allowing different pathways and approaches to tackle crystallographic problems.
– Maximise the ability to handle present and future problems
– Be able to cross hurdles that may be intractable or unnecessarily problematic if not approached the right way.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 8
Why bother knowing about freely available software? (2 of 2)
Much freely available software is state of the art in both algorithms and usability - (GUIs)
• Concentrate on the crystallography
• Can be installed on as many computers as you want - where-ever you like
• Can take programs home and use on their personal computers (negate software piracy problems)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 9
Single Crystal vs Powder diffraction (1 of 9)
Single Crystal• “Mass transit” structure
solution and refinement
• There are difficulties:– Crystal not representative
of the bulk
– Twinning
– Crystal decomposes during data collection
– “Difficult” structure
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 10
Single Crystal vs Powder diffraction (2 of 9)
Cambridge Database• “During 1999, 17,898 new entries were added”
• (that Scale is in the 100’s of thousands)– 1999 report: http://www.ccdc.cam.ac.uk/about/annrep99/Report.html
– http://www.ccdc.cam.ac.uk/prods/csd/stats.html
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 11
Single Crystal vs Powder diffraction (3 of 9)
ICSD Database (inorganics - and minerals)
• During first 6 months of 2002, 3073 new entries were added.
• July 2002 ICSD release : a total of 64,848 entries
ICSD entries by date of publication
0
500
1000
1500
2000
2500
3000
1 9 17 25 33 41 49 57 65 73 81 89 97
Year (19xx)
Pu
blic
atio
ns
Cumulative ICSD entries by date of publication
0
10000
20000
30000
40000
50000
60000
70000
1 9 17 25 33 41 49 57 65 73 81 89 97
Year (19xx)
Pu
blic
atio
ns
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 12
Single Crystal vs Powder diffraction (4 of 9)
Powder Methods for solving structures• A nightmare to some
• An adventure to others!
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 13
Single Crystal vs Powder diffraction (5 of 9)
Number of structures solved by powder methods
• 592 up to end of 2001
• http://sdpd.univ-lemans.fr/iniref.html• http://sdpd.univ-lemans.fr/iniref/SDPD-activity.html
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 14
Single Crystal vs Powder diffraction (6 of 9)
Structure Determination from Powder Diffractometry Round Robin 1
• Tetracycline Hydrochloride (June 1998)
– http://sdpd.univ-lemans.fr/SDPDRR/
– Armel Le Bail and Lachlan Cranswick
• Powder Data:
– 6 week time limit
– 70 downloads of data
– 2 submissions on the Tetracycline within the time limit• CSD System from Stoe
• Druid/Mystic (now called Dash)
• (also solved by Armel Le Bail)
• http://sdpd.univ-lemans.fr/SDPDRR/sample2.html
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 15
Single Crystal vs Powder diffraction (7 of 9)Tetracycline structures obtained from
microcrystal - single crystal diffraction : synchrotron X-rays
• a powder can be a collection of very small single crystals
• 10x20x30 micron crystal (Clegg and Teat)
• Beamline 9.8 at Daresbury Synchrotron: Bruker Smart CCD
– http://srs.dl.ac.uk/xrd/9.8/
• Routine structure solution - including hydrogens found from the map
• Solved at the press of a button as the data was being collected. (few hours data collection)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 16
Single Crystal vs Powder diffraction (8 of 9)What about the “inorganic unknown” in the SDPD Round
Robin?
• No-one bothered to solve it (except Armel Le Bail)– One participant who solved the organic said the inorganic was
“too boring” and thus did not try it.
• Big fad at present is to solve organic pharmaceuticals from powders
• Much commercial software development reflects this emphasis on pharmaceuticals
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 17
Single Crystal vs Powder diffraction (9 of 9)
2nd SDPDRR (Indexing and solving): http://www.cristal.org/sdpdrr2/
• Round robin started on Monday 9th September
• Structure solution ending on Sunday 17th November
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 18
Talk Agenda•Start from Data conversion and phase identification
•Go through to photo realistically rendering crystal structures•Via stops including
– Peak profiling
– Unit Cell refinement
– Powder indexing
– Structure Solution
– Structure refinement
– Structure validation
– Photorealistic rendering of crystal structures
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 19
Phase Identification/Search Match for Powder Diffraction
•Two main parts to perform computer based search-match:– 1. Have a Powder Diffraction Database (buy or make your own)
– 2. Search-match software that uses the above database to search
•Databases:– ICDD has the commercial powder diffraction database area cornered
http://www.icdd.com
– Alternative being developed is the Pauling File: http://www.pauling.com• Editor in Chief: Dr Pierre Villars
•Nearly all Search-match programs are commercial:
•Refer to, "Available Search-Match Software" for a list of known software:– http://www.ccp14.ac.uk/solution/search-match.htm
– Free Software:Brian Toby's "Portable Logic Program" (UNIX) and "MacDiff" for Apple Mac freeware by Rainer Petschick
– Look out for the developing OpenXRD by Stefan Krumm (UNIX and Windows)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 20
Phase Identification/Search Match for Powder Diffraction 2 of 3Identifying an organic – DL-Valine
33- 1954 DL-VALINE
File Name: c:\...\valine.cpi
Valine
2-Theta Angle (deg)10.00 20.00 30.00 40.00 50.00
1
Inte
nsity
(C
ount
s) X
100
000
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 21
Which software, databases and methods work the best: Search Match Round Robin (2nd May 2002 to 30th June 2002):
http://sdpd.univ-lemans.fr/smrr/ and CCP14 mirrors
•Conclusions :
– Search-match without chemistry is possible but:
– Need up to date database
– Need good 3rd generation search-match software
– Need a skilled analyst
– (the skilled analyst seems to be the most important of the 3)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 22
Has the structure been solved already?Crystallographic Structure Databases
•(UK based academics and students already have free access via the EPSRC funded CDS (Chemical Database Service):
– http://cds3.dl.ac.uk/cds/cds.html
•ICSD (Minerals and Inorganics)– http://www.fiz-karlsruhe.de/
– Web accessible demonstration:
– http://barns.ill.fr/dif/icsd/
•MDF/CRYSTMET – (Metals and Alloys)
– http://www.tothcanada.com
•CCSD – (Organics and Organometallics)
– http://www.ccdc.cam.ac.uk/
•American Mineralogist – http://www.geo.arizona.edu/xtal-cgi/test/
•WWW Mincryst– http://database.iem.ac.ru/mincryst/
– 2398 unique phases - most with crystal structure data
•Mineral web – http://www.minweb.co.uk
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 23
ICSD via the Web
Using an Interface created by Alan Hewat at ILL, Grenoble, France
There is a trend for databases to use the web due to the convenience and effectiveness. Also has advantage of being operating system independent for users.
– http://barns.ill.fr/dif/icsd/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 24
A hopeful trend: Crystallography Suites that link directly into the crystal structure databases
Platon for UNIX (if CSD/Quest is also installed):
http://www.cryst.chem.uu.nl/platon/ CSD Cell searching at the click of a button Connectivity search: using the CORINA to generate a PDB file, http://www2.ccc.uni-erlangen.de/software/corina/free_struct.html
– Then use Platon/System S acting as a friendly interface for Quest.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 25
Powder Data Conversion / Importing Data
Initial problem in powder diffraction can be getting the data in the right format. For interconverting powder diffraction data: a variety of programs exist which in combination can pretty much get you from one format to another
Summary list of available software: http://www.ccp14.ac.uk/solution/powderdataconv/
Text Editors may occassionally be required: converting UNIX ACSII to DOS ASCII, getting rid of spaces or tabs , column editing:
Freeware PFE Editor for Windows:
http://www.lancs.ac.uk/people/cpaap/pfe/Freeware ConTEXT Editor for Windows (does column editing)
http://www.fixedsys.com/context/
Example of ConvX for Windows by Mark BowdenMass data powder diffraction data converter
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 26
Structure Importing, Conversion and TransformationSummary list of available software at: http://www.ccp14.ac.uk/solution/structconv/
Be careful to check the resultsBest program for the moment is the shareware Cryscon
http://www.shapesoftware.com
Other software such as GUI WinORTEP can import a wide variety of file formats and export these into Shelx format.
http://www.chem.gla.ac.uk/~louis/software/ortep3/
Example of Cryscon for Windows by Eric Dowty
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 27
Powder Sample Preparation and Data Collection
–Assumption is that you know about appropriate sample preparation and data collection
–However, many hardware vendors might not provide the required flexibility in data collection
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 28
Variable Count Time data collection• Main idea here is to increase the raw intensity of selected peak areas to assist in the “required” analysis: (similar to what a CAD4 does)
– Up till now, if at all, mainly done for refinement (e.g., Hill and Madsen method)
• On point detector (e.g., Bragg Bretano flat plate system), do this by varying the count time in a pre-defined manner
– (Can also provide more time effective counting time)
Fixed Count Time Variable Count Time
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 29
VCT Literature References
"Collection and analysis of powder diffraction data with near-constant
counting statistics", I. C. Madsen and R. J. Hill, J. Appl. Cryst. (1994). 27, 385-392 http://www.iucr.org/cgi-bin/paper?hz0014
Philips Friendly Fortran source code that does this Hill and Madsen method is at: http://www.ccp14.ac.uk/ccp/ccp14/ftp-mirror/csirominerals-anon-ftp/pub/xtallography/variable-count-time/
(Original Hill and Madsen VCT (variable count time) Paper), I. C. Madsen and
R. J. Hill, Adv. X-ray Anal. (1992), 35, 39-47
W. I. F. David, Accuracy in Powder Diffraction, Abstract P2.6 NIST Special
Publication No. 846, Page 210, (1992) National Institute of Standards and Technology, Gaithersburg, MD, USA.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 30
VCT for trace Phase ID (1 of x)
Fixed Count Time data (data collected by Jeremy Cockcroft)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 31
VCT for trace Phase ID (1 of x)
Variable Count Time data (displayed as FCT)(data collected by Jeremy Cockcroft)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 32
VCT for trace Phase ID (1 of x)
Fixed Count Time data (zoomed)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 33
VCT for trace Phase ID (1 of x)
Variable Count Time data (displayed as FCT)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 34
Variable Count Time applications
Equally relevant to problems where you need to adequately profile fit small / trace peaks which might not be significantly above background in a “routine”, time effective fixed count time data collection - e.g.,;
– Powder Indexing– Unit Cell refinement– Quantitative Rietveld Analysis
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 35
VCT to aid in phase ID and profile fitting (1 of 2)
Fixed Count Time
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 36
VCT to aid in phase ID and profile fitting (2 of 2)
Variable Count Time
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 37
VCT for Structure Solution and Refinement (1 of 4)
Variable Count Time data (as collected)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 38
VCT for Structure Solution and Refinement (2 of 4)
Variable Count Time data (displayed as FCT)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 39
VCT for Structure Solution and Refinement (3 of 4)
Variable Count Time data (displayed as FCT)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 40
VCT for Structure Solution and Refinement (4 of 4)
Variable Count Time data (displayed as VCT)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 41
Where is VCT Data Collection?
Not a routine or available option in commercial XRD control software
Something to keep an eye on - or request from vendors. Is in the new Bede powder diffraction system
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 42
Powder Diffraction Utility Software
•Examining Data, peak finding, background stripping, alpha-2 stripping
•Powder v 2.00: http://www.ccp14.ac.uk/tutorial/powder/
•Powder X, http://www.ccp14.ac.uk/tutorial/powderx/
•WinFIT, – http://www.geol.uni-erlangen.de/html/software/soft.html
•Winplotr, http://www-llb.cea.fr/winplotr/winplotr.htm
•XFIT, http://www.ccp14.ac.uk/tutorial/xfit-95/xfit.htm
•Example of PowderX for Windows• Graphical evaluation, backtground
stripping, smoothing, alpha stripping, peak find and pass to treor indexing
• Full GUI Operation
Powder X(Alpha2 Strip, Background Strip, Peak Find)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 43
Peak Profiling (indexing, unit cell refinement, size/strain, etc)
•For Overall Summary of available peak profiling software refer to:
•http://www.ccp14.ac.uk/solution/peakprofiling/
•These include: CMPR, DRXWin, EFLECH, GPLSFT, pearson.xls, SHADOW, Powder v2.00, PowderX, Winfit, Winplotr, XFIT
Examples of XFIT for Windows
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 44
Powder Indexing - a non trivial endeavour• For Overall Summary of available powder indexing software refer to:
http://www.ccp14.ac.uk/solution/indexing/• Powder Indexing: Autox, Ito, Dicvol, Treor, Taup/Powder, Lzon,
Losh, Kohl, Scanix, Xrayscan, EFLECH/Index, Supercell• Linking Suites: Crysfire, Powder v2.00, PowderX, PROSZKI,
WinPlotr, Chekcell
• supercel is a specialise indexing program by Juan Rodriguez-Carvajal for indexing Super Cell and Incommensurate cells. (available within Winplotr)
http://www-llb.cea.fr/winplotr/winplotr.htm
ftp://bali.saclay.cea.fr/pub/divers/fullprof.2k/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 45
Powder Indexing - the “Crysfire” suite•At present the CRYSFIRE software by Robin Shirley links 8 different indexing programs (ito, dicvol, treor, taup, kohl, lzon, fjzn and losh) together with a common interface and using intelligent defaults. Important to have access to as many indexing programs as possible so you can get a feel for the range of possible solutions.
http://www.ccp14.ac.uk/tutorial/crys/
Example of CRYSFIRE Screen prompting the saving into one of 8 different indexing program formats:
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 46
Chekcell: Interpreting Crysfire Summary Files: Powder Indexing and Spacegroup Assignment
•Crysfire interlinks with Chekcell for Windows (part of the LMGP suite for Windows by Jean Laugier and Bernard Bochu). Chekcell provides a graphical interface for manually and automatically suggesting a best cell/spacegroup combination using both FOM and algorithms relating to parsimony of superfluous HKLs.
http://www.ccp14.ac.uk/tutorial/lmgp/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 47
Chekcell : automatic cell and spacegroup searching
can trudge through a single selected unitcell; or over 1000s of trial cells looking for the best cell and spacegroup combination based on “parsimony of extra reflections” criteria.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 48
Chekcell: “integration” of Ton Spek and A. Meetsma’s Le Page
•Obtaining the Reduced Cell
– which many powder indexing programs to not reliably determined
– Refer: "'Reduced Cells', M.J. Buerger, (Zeitschift fur Kristallographie, BD 109, S. 42-60 (1957)”
•Efficient Sub-cell and super-cell searching, then easy reviewing of newly derived cells within the Chekcell interface
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 49
Chekcell: example of using Le Page
•Orthorhombic cell with good FOM (Figure of Merit)
•Le Page combined with automatic “Best Solution” easily finds a better hexagonal cell based on parsimony of extra reflections criteria
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 50
Crysfire / Chekcell: indexing powder Protein data
Using the “Rescale” feature in Crysfire
Finds the correct rhombohedral cell as published in:
•R. B. Von Dreele, P. W. Stephens, G. D. Smith and R. H. Blessing, "The first protein crystal structure determined from high-resolution X-ray powder diffraction data: a variant of T3R3 human insulin-zinc complex produced by grinding", Acta Cryst. (2000). D56, 1549-1553.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 51
Some Alternatives to Crysfire: Winplotr, PowderX
Winplotr by Juan Rodriguez-Carvajal– http://www-llb.cea.fr/fullweb/powder.htm
PowderX by Cheng Dong– http://www.ccp14.ac.uk/tutorial/powderx/
Powder v2 by Nita Dragoe– http://www.ccp14.ac.uk/tutorial/powder/
CMPR for Windows and UNIX by Brian Toby
– http://www.ccp14.ac.uk/tutorial/cmpr/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 52
New MCMaille by Armel Le Bail (Sep 2002)
by Armel Le Bail– http://wwwcristal.org
Monte Carlo Cell finding / indexing software
Whole Profile method using reconstituted peaks positions and intensities
Not sensitive to trace impurities
Poor data can still give no reasonable result.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 53
Unit Cell Refinement (powders)
•For Overall Summary of available unit cell refinement software refer to:
http://www.ccp14.ac.uk/solution/unitcellrefine/
•This includes:– Celref, LAPOD, Refcel, Unitcell, Eracel, Powder v2.00, XLAT, etc
•Can be helpful to perform a conventional unit-cell refinement prior to a Le Bail fit (or where unit weighting of each reflection is important).
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 54
CELREF for Unit Cell Refinement
•by Jean Laugier and Bernard Bochu http://www.ccp14.ac.uk/tutorial/lmgp/
•In this example, celref is performing graphical Unit Cell refinement on calcite in a multi-phase mixture
Knows about spacegroups
Graphics can really help sort out errors or misassigned
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 55
Full Profile Fitting (Powder)
•For Overall Summary of available full profile analysis refer to:
Le Bail based: http://www.ccp14.ac.uk/solution/lebail/
Pawley Based: http://www.ccp14.ac.uk/solution/pawley/
•The most common method of full profile fitting is that of Le Bail fitting: which is in most Rietveld packages. It is useful for:
– Spacegroup Assignment
– Unit Cell Refinement (especially when overlap is a problem)
– Extracting Intensities for Structure Solution
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 56
Le Bail full profile fitting - Rietica Rietveld
•By Brett Hunter– http://www.rietica.org– http://www.ccp14.ac.uk/tutorial/lhpm-rietica/
•Easy to use and setup via GUI
•Le Bail is Structureless whole profile fitting - just need cell and spacegroup
•Easy to add and delete structures
•Auto-marquardt damping for initial unstable refinement if required
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 57
Le Bail full profile fitting - Rietica Rietveld - 2 of 2
• In this example multiphase system where the aim is to get accurate unit cell volumes.
• No completely freestanding peak for KCl
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 58
Unit Cell Refinement: Mass Le Bail fitting: multi-phase - overlapping patterns
Using Le Bail fitting Using Traditional Methods
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 59
Materials Analysis Rietveld/Texture Software• Pole Figure, Texture Analysis –
important also for some forms of Le Bail fitting and structure solution from powders
• Summary List of available software:• http://www.ccp14.ac.uk/solution/pole_figure/
– BEARTEX for Windows
– GSAS Rietveld (Windows/UNIX)
– MAUD for Java
– POFINT
– popLA
– Symmet for DOS
– TexturePlus for Windows
MAUD (for Java PC/Mac/UNIX)Crystallite size and shape analysis
http://www.ing.unitn.it/~luttero/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 60
“Generic” structure solution from powder diffraction data• Very non-trivial endeavour.
• (though indexing can often be the limiting step in many attempted structure solutions)
• EXPO - Direct Methods (Sirware Group) Makers of Sir92/Sir97/Sirpow
– http://www.irmec.ba.cnr.it/Uk/uk-software.htm
• If EXPO fails, it is possible to use Le Bail or Pawley extracted data with Single Crystal Structure Solution Software as described in following slides.
• Then consider real space methods such as using ESPOIR (GPL’d by Armel Le bail) or FOX (GPL’d by Vincent Favre-Nicolin and Radovan Cerny) - normally real space methods use as last resort:
– ESPOIR: http:// sdpd.univ-lemans.fr /sdpd/espoir/– Web tutorial on setting up the ESPOIR files in < 10 minutes" and example of solving on an
organic molecule: http://sdpd.univ-lemans.fr/sdpd/espoir/10mn/
– FOX: http://objcryst.sourceforge.net/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 61
“Specialised and Commercial” Structure Solution Programs
• PSSP – molecular structures – http://powder.physics.sunysb.edu/programPSSP/pssp.html
• ZEFSA II – for Zeolites (GPL’d) – http://www.mwdeem.rice.edu/zefsaII/
• Focus – for Zeolites
– http://www.kristall.ethz.ch/LFK/software/• Fullprof – Monte Carlo for structure solution and finding Magnetic Moments in neutron data
– ftp://bali.saclay.cea.fr/pub/divers/winplotr/
• “Available” Commercial Structure Solution from Powder Diffraction Data software:– Powder Solve: http://www.accelrys.com
– Crystal Structure Determination Package (WinCSD/CSD) : http://imr.chem.binghamton.edu/zavalij/CSD.html
– DASH (Druid and Mystic of old): http://www.ccdc.cam.ac.uk/prods/dash/
– TOPAS : http://www.bruker-axs.com
– Endeavour : http://www.crystalimpact.com/endeavour/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 62
EXPO direct methods in Action (1 of 4)Edit the input / control file
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 63
EXPO direct methods in action (2 of 4)Click on the OK button to start
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 64
EXPO direct methods in action (3 of 4)Le Bail fitting of the powder pattern
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 65
EXPO direct methods in action (4 of 4)Structure after being solved and auto built
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 66
New FOX real space structure solution by Vincent Favre-Nicolin and Radovan Cerny
Available for UNIX/Linux and MS-Windows
GUI Based
Very user friendly in setting up rigid bodies
Includes automatic merging of atoms on special position with dynamic occupancy correction
http://objcryst.sourceforge.net/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 67
Adding polyhedra in Fox - 1 of 5
Click on “Crystals”, “Scatterers” Icon, “Add”
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 68
Adding polyhedra in Fox - 2 of 5
Select the central atom
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 69
Adding polyhedra in Fox - 3 of 5
Select the corner atom(s)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 70
Adding polyhedra in Fox - 4 of 5
Give the Bond length
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 71
Adding polyhedra in Fox - 5 of 5
Done!
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 72
Single Crystal Structure Solution
•CAOS (also inside part of Sir97) – Ricardo Spagna, et. al. –Patterson Solution Option.
•Crisp – Part of the GPL’d Xtal Suite –Direct Methods
•Crunch – R. de Gelder, R.A.G. de Graaff & H. Schenk,–Direct Methods and automatic structure building
•Dirdif - P.T. Beurskens, G. Beurskens, R. de Gelder, et al. - UNIX and Windows–Patterson Methods for heavy atoms and fragments and automatic structure building
•Patsee – E. Egert and G. Sheldrick–Fragment Search
•SAPI and DIMS – Fan Hai-Fu, et al.–Direct methods including ability to handle pseudo-symmetry and incommensurate modulated
structures and composite structures (Windows)
•Shake’n’Bake (SnB) – Weeks, Miller, et al.–Dual-space direct methods. (Linux, SGI, IBM AIX, Alpha executables via web)
•ShakePSD/DS*SYSTEM – Kenji Okada–Windows based direct methods for large structures up to 500 atoms
•Shelxs 86/97/d- George Sheldrick–Direct Methods and Patterson Option
•Sir92/97/2000 – Sirware Group: Cascarano, Giacovazzo el al–Direct Methods and automatic structure building
•Solver – in NRCVAX Suite – based on Multan–Direct Methods
Applicable to powder diffraction: http://www.ccp14.ac.uk/solution/xtalsolution/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 73
2D to 3D model building software
•Applicable for Generating 3D fragments for Patsee/Dirdif Orient – single crystal/powder
•Summary list at:
–http://www.ccp14.ac.uk/solution/2d_3d_model_builders/
•E.g., CORINA (COoRdINAtes) (Use web based direct submission):http://www2.ccc.uni-erlangen.de/software/corina/free_struct.html
Comes with a Java Molecule Editor for building up the 2D structure over the web which generates the required SMILES string from the drawn molecule. In this example a 2D tetracyline PDB file is generated: CN(C)C3C(O)=C(C(N)=O)C(O)C4(C)C(O)C2C(=O)c1c(O)cccc1C(C)(O)C2CC34
(Word of warning: the “energy minisation” may generate an inaccurate 3D model where different conformations are possible)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 74
Getting fragments into Dirdif, Patsee for Windows
•One of the User Friendliest methods is to use is WinGX’s “SXGRAPH” GUI Shelx INS/RES file Editor
–http://www.chem.gla.ac.uk/~louis/software/wingx/
•Either graphically Browse and Edit the Orbase Entries or Open an imported structure file (CSSR, CSD, Shelx or CIF from existing structure refinement), clean it up, then save it as a fragment ready for immediate use with Dirdif for Windows. (or any Dirdif)
•For Dirdif: File, Save ATMOD File
•For Patsee: File, Save PATSEE File
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 75
Single Crystal Structure Refinement Software(Applicable to powder diffraction for helping build up the structure)
•Range of programs to choose from:
–http://www.ccp14.ac.uk/solution/xtalrefine/
•CAOS (also inside Sir97)
•Crystals
•DS*SYSTEM/LSBF
•Jana
•NRCVAX
•Shelxl–(Shelxl is within 3 freely available crystallographic suites)
–WinGX
–Platon/System S
–ORTEX
•Xtal (GPL’d)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 76
Example of Crystals for Windows David Watkin, Richard Cooper, et al.: http://www.xtl.ox.ac.uk/
• Will focus on Hydrogen addition
• Import the structure from Shelx or Sir
• Assymetric unit is always in view
• Bond types are graphically displayed for instant feedback.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 77
Guided structure refinement using Crystals
• Automatic Hydrogen Addition
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 78
Interrupt the Guided Refinement in CrystalsManual Hydrogen Addition - 1 of 2
• Crystals explains what is going on in a language organic chemists and students can understand
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 79
Interrupt the Guided Refinement in Crystals Manual Hydrogen Addition - 2 of 2
• A “Wizard” then guides the user to complete the hydrogen addition
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 80
Structure refinement using Crystals New validation via CCDC Mogul program: local geometry checking
• To students and new users, every structure must seem like a new structure type. Thus using Mogul geometry check can encourage students to look for errors or novel features of the structure.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 81
Validation using Crystals Cambridge database local geometry check (2 of 2)
Mogul is spawned and gives distributions of bond lengths and angles
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 82
Validation within Rietveld / powder Software
• Normally done manually or by linking into other software: such as Platon (EXPGUI links to Platon)
• However various Rietveld programs links to some options:– Following example of “Bond - Valence” calculations within Rietica
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 83
Structure Refinement using Powder Diffraction Data(Rietveld Refinement)
• Large range of programs to choose from:
– http://www.ccp14.ac.uk/mirror/mirror.htm
• Many specialize for particular types of problems, incommensurate structures, quantitative analysis, polymers, etc.
• ARITVE, BGMN, DBWS, DEBVIN, EXPO
• Fullprof, GSAS, Koalariet, LHPM-Rietica, MAUD for Java (GPL’d)
• Premos/Remos, ProDD, Profil, Riet7/SR5, Rietan 2000 (GPL’d)
• Rietquan, Simref, WinMprof, XND, XRS-82/DLS-76
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 84
Rietveld Program Interfaces Not yet as robust and powerful as
single crystal refinement programs (Single Crystal programs are very poweful and do a lot for the user)
Unlike most single crystal suites, you are not interacting directory with the structures on the screen.
Many choose their Rietveld based on what the people down the road are using. Not only human nature but learning a Rietveld program from scratch can be difficult.
• Interfaces into Rietveld programs vary from GUIs to direct editing of ASCII files.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 85
Rietveld Programs - Rietica by Brett Hunter Full Graphical User Interface Still got to appreciate and know your crystallographyfor
inserting and refining the crystal structure http://www.rietica.org
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 86
Mentioning GSAS Rietveld: Some Relevant Background
• by Bob von Dreele and Alan Larsen
• Menu based control
• Available for Windows / DOS / Linux / SGI
• Separate GUI by Brian Toby (EXPGUI)
• Combined X-ray / Neutron / Single Crystal / Powder Diffraction
• Integrated Fourier map generation and viewing
• GSAS resources, tutorials and links (including links to EXPGUI)– http://www.ccp14.ac.uk/solution/gsas/
• Restraints– Bond angle
– Bond length
– Planar
– Total Chemistry / charge balance
– Chiral volume
– Phi/psi group
– Torsion angle
• Manual Marquadt damping
• Atom shift limits
• Lots of other features
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 87
GSAS : Solving and refining a protein from powder data
• As cited in R. B. Von Dreele, P. W. Stephens, G. D. Smith and R. H. Blessing, "The first protein crystal structure determined from high-resolution X-ray powder diffraction data: a variant of T3R3 human insulin-zinc complex produced by grinding", Acta Cryst. (2000).
D56, 1549-1553.
http://journals.iucr.org/d/issues/2000/12/00/issconts.html
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 88
Brian Toby’s EXPGUI Interface for GSAS
User friendlier to start using GSAS via EXPGUI(A new combined installer makes it very easy to start using GSAS.)
http://www.ncnr.nist.gov/programs/crystallography/software/expgui/expgui_intro.html
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 89
Restrained Rietveld structure refinement of organics
• Software not as powerful as single crystal but there are some tutorials with tricks on the CCP14 website
http://www.ccp14.ac.uk/solution/restrained_rietveld/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 90
Fourier capability in Rietveld Software
GSAS (including VRML output)
Summary list of Fourier friendly Rietveld software at: http://www.ccp14.ac.uk/solution/rietveld_fourier_maps/
Fullprof /
GFOUR for Windows
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 91
Single Crystal Suites(also applicable to powder diffraction)
• Again, a large range of programs to choose from:
– http://www.ccp14.ac.uk/solution/xtalsuites/
• Crystals for Windows - David Watkin, Richard Cooper, et al
• DS*SYSTEM - Kenji Okada
• ORTEX - Patrick McArdle
• Platon / System S for UNIX - Ton Spek
• WinGX for Windows - Louis Farrugia• Xtal (GPL’d) - Syd Hall, Doug du Boulay & R. Olthof-Hazekamp
• NRCVAX - Eric Gabe, Peter White, et al
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 92
WinGX for Windows single crystal suiteLouis Farrugia: http://www.chem.gla.ac.uk/~louis/software/
• Complete Single Crystal Suite for Windows• Links to dozens of other programs (new and old) via GUI
interfaces• Nearly all programs are included with WinGX
distribution
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 93
WinGX for Windows single crystal suite Structure Solution
• Shelxs97, Shels86, (Shelxd)
• Sir97, Sir 92
• Dirdif (Patterson and fragment)
• Patsee fragment searching
• SXGRAPH GUI with WinGX– SXGRAPH Shelxl GUI allows an
easy interface for loading of fragments for passing to Patsee or Dirdif
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 94
WinGX for Windows single crystal suite Refinement - Shelxl 97 (WinGX now links to Crystals as well)
• GUI control of Shelx via WinGX’s SXGRAPH program
• or Shelx ASCII INS File
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 95
WinGX for Windows single crystal suite Hydrogen Addition options
• Shelx97 (G. Sheldrick)– Manually edit INS file
– Via SXGRAPH GUI
• GUI XHYDEX (G Orphen)
• GUI CalcOH (M Nardelli)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 96
WinGX for Windows single crystal suite Easy Interlinking with Ton Spek’s Platon
• ADDSYM
• Other Platon Features
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 97
WinGX for Windows single crystal suite Structure Plotting
• GUI WinORTEP
• GUI WinSTRUPLO
• Platon/Pluton/ADP
• GRETEP (plugin)
• Schakal (plugin)
• Rasmol
• Photo realistic rendering– Povray
– Render / RASTER 3D
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 98
Some Specialist Applications
• Anharmonic Refinement
– List of Software:
– http://www.ccp14.ac.uk/solution/anharmonic/
• Incommensurate Structure Refinement
– List of Software:
– http://www.ccp14.ac.uk/solution/incomm.htm
• PDF / High Q Analysis
– List of Software:
– http://www.ccp14.ac.uk/solution/high_q_pdf/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 99
Quantitative Phase Analysis• Non-trivial and in many cases,
custom solutions may be required. (accurate Quantitative analysis is a complete world in itself)
• Rietveld programs are commonly used for Quantitative Analysis (refer list in a previous slide).
• Refer to non-Rietveld references cited in:
Following using Koalariet / XFIT(fundamental parameters)
http://www.ccp14.ac.uk/tutorial/xfit-95/
http://www.ccp14.ac.uk/poster-talks/david-hay-quant-notes-axaa99/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 100
MAUD for Java : GPL’d (you get the source code)
Tutorial on “Performing an x-ray quantitative analysis in seven easy steps!”:
http://www.ing.unitn.it/~luttero/maud/tutorial/
http://www.ccp14.ac.uk/ccp/web-mirrors/lutterotti/~luttero/maud/tutorial/
Including options for standardless quantitative analysis on amorphous material
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 101
Quantitative Phase Analysis - is it routinely easy?
Based on the IUCr CPD Quant Round Robin(http://www.iucr.org/iucr-top/comm/cpd/QARR/)
The answer seems to be No!A quote from Armel Le Bail’s Tmacle “twinned refinement” software manual seems appropriate:
http://sdpd.univ-lemans.fr/museum/tmacle92.zip
GOOD LUCK IT'S VERY HARD! DON'T YOU THINK SO?ONLY THE BOSS SAID THAT IT IS EASY, BUT HE NEVER TRIED!
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 102
Graphically interacting with the structure• Number of programs available with
list available at:http://www.ccp14.ac.uk/solution/structuredrawing/
• Most single crystal suites include structure viewing by default but not powder refinement programs
• Some can read common file formats (CIF, Shelx, etc)
– Gui WinORTEP reads the widest variety of formats
• Software includes: Crystals, Cameron, PIG (part of the Xtal suite), ORTEX, Gretep, Platon, GUI WinORTEP, GUI WinSTRUPLO
Gretep by Jean Laugier and Bernard Bochuhttp://www.ccp14.ac.uk/tutorial/lmgp/#gretep
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 103
Graphically interacting with the structure (more examples)
GUI WinORTEP (http://www.chem.gla.ac.uk/~louis/software/ortep3/)
GUI WinSTRUPLO (http://www.chem.gla.ac.uk/~louis/software/struplo/)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 104
Platon: Validation - why take an interest?• For perhaps the same reason that Columbia University
Law/Journalism professors teach their students (at least one - circa late
1940’s):
“If your mother says she loves you,”
“CHECK IT OUT!!”
• If you want to solve, refine and publish structures that can stand the test of time - that means doing a variety of validation and using a variety of programs to assist in validation!
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 105
Structure validation and quality checking(Each suite can offer different
features)
e.g., ORTEX by Patrick McArdle:
Example of the Void Finding and graphical viewing within ORTEX (including estimate of time to completion)
Platon can do this as well, including display of the void areas as shown on the right
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 106
WinGX for Windows single crystal suite Validation and Structure Checking
• Platon (Addsym, etc)
• CIF Validation
• Parst
• GEOM
• THMA 14c
• IDEAL
• SYMMOL
• WTANAL
• R-tensor
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 107
Platon’s Addsym (by Ton Spek): checking for extra symmetry : e.g., Structure Published in 1997
P1 - Triclinic: 42 non-H atoms
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 108
Platon’s Addsym: Correction Published in 1999: C2 - Monoclinic: 22 non-H atoms
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 109
Platon’s Addsym: Press of a button: 2000: FDD2 - Orthorhombic: 11 non-H atoms
(Short Communication Abstract: "P1 or P-1? Corrigendum", Acta Cryst B56 (2000) 744 from Richard E. Marsh)
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 110
Platon’s Addsym: for powders • Some powder based structures at the Royal Institution
and Birkbeck College in London solved using EXPO
• Triclinic P 1 - found by Addsym to be P -1
• Orthorhombic:
– P 21 21 21 - found by Addsym to be P n m a– P 2 21 21 - found by Addsym to be P m m n
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 111
Powder diffraction pattern calculationPowder Cell for Windows
• Most Rietveld Programs can calculate powder patterns but they may not be all that friendly to use
• Two dedicated programs for calculating powder patterns - 1st being:
• Powder Cell by Werner Kraus and Gert Nolze at BAM in Germany
http://www.ccp14.ac.uk/tutorial/powdcell/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 112
Powder diffraction pattern calculationPoudrix for Windows
• Powder Cell by Jean Laugier and Bernard Bochu
http://www.ccp14.ac.uk/tutorial/lmgp/#pdw
• Poudrix can handle anomalous dispersion at non X-ray tube wavelengths with the option of two models:
– Brenann and Cowan
– Sasaki
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 113
Photorealistic hardcopy output of structures
Many programs can do this. E.g,
ORTEX (Images and Movie Animations):
• http://www.nuigalway.ie/cryst/
• Just open up a Shelx format *.INS/*.RES file and go for it
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 114
Photorealistic hardcopy output of structuresGUI WinORTEP / GUI Struplo / WinGX
http://www.ccp14.ac.uk/tutorial/wingx/
• Can open a wide variety of file formats including Shelx, CIF, GSAS, Fullprof, CDS, etc
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 115
Photorealistic hardcopy output of structuresUsing GRETEP by Jean Laugier and Bernard Bochu
http://www.ccp14.ac.uk/tutorial/lmgp/http://www.ccp14.ac.uk/ccp/web-mirrors/lmgp-laugier-bochu/
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 116
Freeware for photorealistic hardcopy output of structures
Balls and Sticks by Sung J. Kang & Tadashi C. Ozawa
• http://www.toycrate.org• http://www.ccp14.ac.uk/ccp/web-mirrors/toycrate/
• Individual point and click creation of polyhedra and bonds via a Windows graphical user interface
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 117
Photorealistic hardcopy output of Fourier MapsMarching Cubes by Michal Husak
(http://www.ccp14.ac.uk/tutorial/marchingcube/)
• Interlinks with WinGX, Crystals and can read Project XD files. Software for converting GSAS Fourier files is available.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 118
Dual Boot UNIX / Windows PC and Crystallographic Nexus CD-ROMs for those isolated from the internet
• Tutorials for creating dual boot Windows / UNIX PCs:
• Linux– refer: http://www.ccp14.ac.uk/solution/linux/
• FreeBSD (can run linux binaries)– refer: http://www.ccp14.ac.uk/solution/bsdunix/
• (be careful of hackers invading your systems when running Linux/UNIX. CCP14 tutorials try to be security conscious and leave no “open” services)
• Free Xtal Nexus CD-ROMs for academics and students
• http://www.unige.ch/crystal/stxnews/nexus/index.htm
• (Supported & Sponsored by the IUCr and CCP14)
• Contact the author (Lachlan Cranswick) for a freeair-mailed CD-ROM.
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 119
Don’t be a “passive kitten” Just looking over someone’s shoulder will not teach you how to use this
software. You have to use it yourself on your real scientific problems.
Image from: http://www.cs.umbc.edu/~rheingan/SIGGRAPH/motion.slides.pdf
Lachlan M. D. Cranswick ([email protected]) http://www.ccp14.ac.ukSlide 120
Summary
Large Genetic Diversity of Software This diversity is necessary to help you get the job done. Getting better all the time (some areas faster than others) Free available for Academics and Students
• Downloadable via the EPSRC funded CCP14 website:
http://www.ccp14.ac.ukE-mail: [email protected]