Frequently Asked Questions
Yokogawa WE series
LF 12Y18A00-01EN-E
WE Series analyzers give you better insightPower plants steam and water cycle plays a crucial role in energy production. Yokogawa has provided quality control of steam and water for many decades delivering turnkey solutions with smart analyzers and customized systems. As a reliable partner, Yokogawa offers a one-stop solution with complete life cycle management. Answering challenges to improve power plants safety and availability, helping operators to minimize and avoid risks, Yokogawa can complete product portfolios with wet chemistry analyzers.
WE410 Silica Analyzer protects critical systems with reduced costs and maintenance related to continuous online monitoring of the silica content. It is designed for high performance with low reagent consumption.
Features: • Low reagent consumption, reduced operation
costs• Wide range of detection: 0 to 5000 ppb • Large, easy to read display • Simple menu interface with intuitive navigation • Compact size • Intelligent Sample Awareness • Temperature controlled sample cell, assuring
higher accuracy • On-demand mode for non-continuous operation
– Housekeeping mode for rapid start up
WE420 Sodium analyzer offers high reliability while providing continuous measurement of Sodium concentration, and meeting all demands for high purity water requirements.
Features: • Early warning detection system protects costly
effects of corrosion• Step by step, simple scrolling instruction
interface• Minimized maintenance time – no moving parts
or pumps• Detection limit of 0.1 ppb • Extended reagent consumption reduces OPEX • Stable and drift free measurement• No need for frequent calibration
Is your plant steam and water cycle well balanced? Wet Chemistry Analyzer platform
Frequently Asked Questions
Yokogawa WE series
Subject to change without noticeAll Rights Reserved. Copyright © 2019, Yokogawa Europe BVPrinted in The Netherlands, edition 01
Yokogawa Europe B.V.Euroweg 2, 3825 HD Amersfoort,
THE NETHERLANDSwww.yokogawa.com/eu
WE430 Hydrazine analyzer ensures high precision and real-time hydrazine measurement for optimum efficiency throughout. With the Yokogawa WE 430 analyzer, control and protection of the system is provided with well-balanced performance, ease of use and in same time optimized system.
Features: • Designed for versatility and accuracy• Consistent, precision-maintaining high
performance• Repeatable and verifiable • Easy to operate and calibrate • User selectable calibration modes • Hydrazine detection limits 0 ppb to 200 ppb• Extended reagent consumption
WE440 Phosphate analyzer is optimized for applications that require early detection without compromising the precision of the phosphate measurement. Initial detection results in the reduction of scaling formation, microorganisms, and other effects that decrease equipment efficiency. With the added benefit of reduced reagent consumption, the WE440 leads to an overall lower cost of ownership.
Features: • Optimized reagent consumption reducing OPEX• Accurate and precise measurements for fine
control of Phosphate dosing• Compact size • Simplified operation with intuitive menu
navigation• Low operating costs with low power
consumption and minimal maintenance• On-demand mode for non-continuous operation
– Housekeeping mode for rapid start up
Is your plant steam and water cycle well balanced? Wet Chemistry Analyzer platform