FRIALEN - · PDF fileEN 1555-2, EN 12201-2, EN 13244-2, ... FRIALEN ®, FRIALOC,...

www.frialen.com

FRIALEN®Safety FittingsThe safe joining technology for gas-, water and industrial pipings made of PE-HD and PE-Xa

valid from 1st February 2012PRODUCT RANGE ES 31/12

FRIALEN®

Things worth knowing about FRIALEN®-Safety Fittings and this Product Range

Contents

To help you to find specific products easily we have included an alphabetical list arranged in product groups on pages 4-6.

Stocking Status

Please note the following:• All articles with a stock Status of 1 are usually available

ex-stock.• All articles with a stock Status of 2 are manufactured

to order and hence have a delivery time of 3 - 4 weeks.

Packaging and pallet units

The product range shows packaging units (BX) and pallet units (PU). An order in complete BX/PU will simplify the procedure in your goods inwards department as well as your storage and ensures we can pick and deliver your order quickly. The pro-duct range will show that we have selected sensible and fair packaging units for you.

Returns

Goods returned for credit must comply with certain criteria un-der our Quality Management System. We shall be glad to inform you about this separately on request. If the goods meet the criteria and their return is approved by us in advance they will be credited less 25 % inspection costs.

Inspection certificates

We charge an administration fee of € 15,- per item for our in-spection certificates according to DIN EN 10204-3.1. You will be able to request such a certificate at the time of your order. For FRIALEN® articles we are able to provide you with a certi-ficate where requested. In this case we would only require the component‘s traceability batch which you will find on the bar-code or in the delivery documents. Inspection certification is archived for a period of 10 years.

Component Traceability

Each construction part has an additional barcode for tracea-bility.

Quality Certification

FRIALEN®-Safety Fittings are subject to constant quality checks under stringent inspection regulations, which are part of our comprehensive Quality Management System which is certified to DIN EN ISO 9001:2008.

The FRIALEN®-Safety Fittings range and the operation of our Technical Equipment FRIATOOLS® are matched to each other. All modifications and additions occurring in the course of continuing technical development are taken into account. Our continuous monitoring of production as part of the Quality Assurance System includes the FRIALEN®-Safety Fittings, the Technical Equipment FRIATOOLS® and the quality of the fused joint as a result of the combination of these two components. The operation and functional safety of fusion units from other manufacturers are not subject to our specifications and checks. When installing fittings please proceed in accordance with our assembly instructions and the operating instructions for the equipment.

DVGW Permit/Fusion capability

FRIALEN®-Safety Fittings are licensed for use with gas and wa-ter. They have been registered by DVGW GW335-B2 with deci-sions DV-8601AU2248, DV-8606AU2249 and DV-8611AU2250 and are subjected to regular outside monitoring. Certain indi-vidual registrations apply to some parts; these are listed in the instructions.

FRIALEN®-Safety Fittings can be fused to pipes of SDR stages 17.6 (s min = 3 mm) to 11 in accordance with DIN 8074, ISO 4437, ISO 4427, DIN EN 1555 and DIN EN 12201. Processing of other SDR levels on request.

FRIALEN® Saddle fittings up to d 63 may only be processed using pipes up to SDR 11.

FRIAFIT®-Couplers AM SDR 17 are designed for use in drin-king water systems PN10 and industrial water systems. They are registered according to DVGW GW335-B2 certified by DV-8606BO6114 and DV-8611BO6115 and are subject to regular external checks.

FRIAFIT®-Couplers AM SDR 17 may be fused with pipes ranging in SDR from 33 to 17 according to DIN 8074, ISO 4427, EN 12 201 and EN 13 244.

Please also note the information on the fusible SDR classes on the fitting barcode.

FRIALEN®-Safety Fittings may be processed with pipes made of PE 100, PE 80, PE 63, PE 50 according to DIN 8074/75, EN 1555-2, EN 12201-2, EN 13244-2, ISO 4437 and ISO 4427, PE-Xa according to DIN 16892/93, PE-LD according to DIN 8072/73. For PE-pipes a melt flow rate MFR 190/5 in the range of 0,2 to 1,7 g/10 min. applies. We recommend the use of pipes with limited diameter tolerance, tolerance class B. PE-LD-pipes can be fused at ambient temperatures > 0 °C.

FRIALEN®-Safety Fittings consist of PE 100 and fulfill the re-quirements according to EN 1555-3, EN 12201-3, EN 13244-3, ISO 4427-3, ISO 8085-3, as well as the DVGW certification. The processing of FRIALEN®-Safety Fittings with FRIAMAT® fusion

2 ES 31/12

units is possible at ambient temperatures between - 10 °C and + 45 °C.In the case of material transfer connections additional material or system specific standards and assembly guidelines have to be observed. For case by case restrictions in the installation, and also when working with FRIALEN®/FRIAFIT®-Safety Fittings in general, please read our assembly instructions. Our customer support staff in the sales office will also be glad to answer any que-stions.

Pressure loading capacity

The pressure loading capacity of FRIALEN®/FRIAFIT®-Safety Fittings made of PE 100 will be printed in SDR (Standard Di-mension Ratio) stages.

SDR = Pipe outside diameter dPipe wall thickness s

The authority for this is the latest revised Standards and pro-posed Standards DIN EN 1555, DIN EN 12201, DIN 8074 and 8075 taking into account of the new design factor C (calcul-ation coefficient for components made of PE). Herefrom we get the following pressure stages:

Fitting material: PE 100

Water Gas

SDR Stagemaximum working

pressure in bar for C = 1,25

maximum working pressure in bar

for C = 2

17 10 5

11 16 10

7.4 25 -

Cooling times

FRIALEN®-Couplers/Elbows/T-Pieces/Transition fittings

The cooling times given in the barcodes, and identified by ad-ditional letters (letter C.T.) are the times during which the fused joint should not be moved.

Longer cooling times should be allowed before pressu-risation. Please read our assembly instructions on this.

FRIALEN®-Fittings/Valves/Saddles

The cooling times given in the barcodes (C.T.) are the times before tapping takes place.

After the cooling period for the fused joint has passed a pressu-re test can be made on the house pipe. Please read our assem-bly instructions on this.

FRIAGRIP® PE-Adapter

For AZ pipes, the tensile strength cannot be guaranteed!

For use on PVC gas pipes, see the assembly instructions FRIAGRIP® on PVC gas pipe (HM 401 04). For PVC pipes with wall thicknesses < DIN 8061/62-PN10, an internal supporting sleeve is to be used.

For use on stainless steel pipes, see FRIAGRIP® information no. HI 420. FRIAGRIP® component parts can exclusively be used in underground engineering!

Processing

For processing please refer to our assembly instruction which may also be downloaded from the internet on www.frialen.com.

FRIALEN® saddle parts Top-Loading

The indication of the dimension, including the value in brackets, marks the authorized assembly and fusion range for the saddle part. It is possible that the standard application range is limited by technical restrictions (e.g. length of drill/pipe wall thickness or tapping diameter/diameter of shut-off saddles). Suitability must be checked for other areas of application.

Technical Information

This technical Information in this product range is not com-prehensive. Please refer to our data sheets for detailed Infor-mation. These may also be downloaded from the internet on www.frialen.com/www.frialen-xl.com.Technical hints for processing or use could be attached to the product and must be strictly observed.

Update/Technical Progress

All specifications are valid as at time of going to print. We re-serve the right to implement changes which serve technical progress. We do not accept liability for printing mistakes.

Brand Names

For a better readability, no identification by ® and ™ was used in the continuous texts of this price list. The following brands are registered: FRIALEN®, FRIALOC®, FRIAFIT®, FRIAGRIP®, FRIATOOLS®, FRIAMAT®, Sentry GS®, BAIO®, NOVO-Sit®, Ril-san®, Straub® as well as Gas-Stop™.

Things worth knowing about FRIALEN®-Safety Fittings and this Product Range

ES 31/12 3

Table of ContentsArticle Brief Description Page

Shut-Off Valve

FRIALOC PE shut-off valve with shut-off mechanism suitable for plasticsApplication: Water

FRIALOC Water 43

Installation kits for FRIALOC® PE shut-off valves FBS 43

Pressure Tapping Tees

Pressure Tapping Tees with extra long outlet spigot in kit version DAA (KIT) 35

Pressure Tapping Tees with extra long outlet spigot DAA 36

Pressure Tapping Tees with parallel dome and extra long outlet spigot DAP 37

Pressure Tapping Tee Top-Loading with extra long outlet spigot DAA-TL 37

Pressure Tapping Tees Top-Loading/Relining with extra long outlet spigot DAA-TL/RE 38

Cap for Pressure Tapping Tees K 38

Pressure Tapping Valves

Pressure Tapping Valves with extra long outlet spigot in kit version DAV (KIT) 41

Pressure Tapping Valves Top-Loading with extra long outlet spigot DAV-TL 41

Pressure Tapping Valves with extra long outlet spigot DAV 42

Installation kits for Pressure Tapping Valves EBS 42

Flange Adaptors

Full Faced Flanges (Spigot fittings) EFL 29

Flange T-Piece FLT 29

Flange Reducer FLR 30

Excess Flow Valves

Long Couplers with integrated Mertik Maxitrol excess flow valve FRIASTOPP 12

Long Couplers with integrated Pipelife Gas-Stop™ System FRIASTOPP 13

Electrofusion Reducers with integrated Mertik Maxitrol excess flow valve MR-STOPP 13

Ball Valves

Ball Valves in HD-PE, 1/4 turn KHP 44

Ball Valves made from HD-PE, VA turn, full port KH 44

Tapping Ball Valves in HD-PE, 1/4 turn, for side tapping under pressure AKHP 45

Tapping Ball Valves in HD-PE, VA turn, Top-Loading for side tapping under pressure AKHP-TL 45

Installation kits for Ball Valves and Tapping Ball Valves (Standard and Top-Loading)

BS 46

Couplers

Slide-over couplers, SDR 11 UB 7

Slide-over couplers, SDR 17 UB/AM 8

Couplers with removable stop MB 9

Long Couplers with removable center stop FRIALONG 9

Conical ring couplers KM-XL 10

Slide-over couplers PN 25 UB PN 25 10

Relining Slide-over Couplers REM 11

End Caps MV 11

Reducers

Electrofusion Reducers MR 12

ES 31/124

NEW!

Article Brief Description Page

Repairs

Repair Sleeves RW 21

Pipe junction for borehole heat exchangers

Y-Pieces with 3 integrated electrofusion couplers Y 21

YS-Pieces with 2 integrated electrofusion couplers and a spigot end YS 21

Shut off Saddles

Shut off Saddles SPA 40

Shut off Saddles Top-Loading SPA-TL 40

Cap for Shut off Saddles SPAK 40

Spigot Saddles

Spigot Saddles SA 32

Spigot Saddles Top-Loading SA-TL 33

Spigot Saddles XL SA-XL 33

Spigot Saddles with integral drill SAB 34

Spigot Saddles with flange outlet SAFL 34

T-Pieces

T-Pieces with extra long outlet spigot in kit Version TA (KIT) 19

T-Pieces T 19

T-Pieces XL T XL 20

T-Pieces XL reduced T red XL 20

T-Pieces with HD-PE/GGG adapter for connection of BAIO® spigot hydrant TGB 18

T-Pieces with HD-PE/GGG adapter for connection of NOVO-SIT® spigot hydrant TGN 18

Transition Fittings

Transition Fittings HD-PE/Steel USTR 22

Transition Fittings HD-PE/Steel (Spigot fittings) USTRS 22

FRIAGRIP PE-Adapter FGPA 23

Transition Fittings HD-PE/Steel with male thread USTN 23

Transition Fittings HD-PE/Steel with female thread USTM 24

Transition Elbows 90° HD-PE/Steel with male thread WUSTN 90° 24

Transition Elbows 90° HD-PE/Steel with female thread WUSTM 90° 25

Transition Fittings HD-PE/Brass with male thread MUN 25

Transition Fittings HD-PE/Gunmetal with female thread MUM 26

Transition Elbows 45° HD-PE/Brass with male thread WUN 45° 26

Transition Elbows 90° HD-PE/Brass with male thread WUN 90° 27

Universal adapters HD-PE/Brass with male thread UAN 27

Universal adapters HD-PE/Brass with female thread UAM 28

Transition Fitting for liquid gas HD-PE/Copper UFLG 28

Table of Contents

ES 31/12 5

NEW!

NEW!

NEW!

Table of ContentsArticle Brief Description Page

Valve Tapping Saddles

Valve Tapping Saddles with HD-PE/Gunmetal adapter, female thread VAM-RG 39

Valve Tapping Saddle Top-Loading with HD-PE/Gunmetal adapter, female thread VAM-RG-TL 39

Repair and Reinforcing Saddles

Reinforcing Saddle RS 30

Repair and Reinforcing Saddles VVS 30

Repair Saddles XL RS-XL 31

Repair Saddle Top-Loading VSC-TL 31

Elbows

I/A Elbows 11° WS11° 14

Elbows 30° W30° 14

Elbows 45° W45° 15

Elbows 45° XL W45° XL 15

Elbows 90° W90° 16

Elbows 90° XL W90° XL 16

Swan Neck Bend WET 17

90° Elbow with base unit WF 90° 17

90° Elbow with base unit and HD-PE/GGG adapter for connection of BAIO® spigot hydrant

WFGB 17

90° Elbow with base unit and HD-PE/GGG adapter for connection of NOVO-Sit® spigot hydrant

WFGN 18

6 ES 31/12

NEW!

NEW!

NEW!

UB Slide-over couplers, SDR 11With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With fusion indicators for visual fusion control. Diameter d 400 and bigger with pre-heating technology (d 400 – d 450 optional use; d 500 – d 800 required).Special sizes on request

PE 100 SDR 11Maximum working pressure 16 bar (water)/10 bar (gas)

.

d Order Ref. Stock-status BX PU D L Weight

kg/each20 612660 1 110 3.520 33 60 0,03725 612661 1 120 3.840 38 66 0,04432 612662 1 60 1.920 45 77 0,06440 612663 1 40 1.280 54 86 0,09650 612664 1 25 800 68 98 0,15163 612665 1 15 480 82 112 0,22575 612666 1 50 400 98 122 0,32290 612667 1 30 240 114 138 0,436110 612668 1 24 192 137 159 0,705125 612669 1 16 128 156 172 0,946140 615001 1 12 96 174 184 1,270160 612671 1 8 64 199 190 1,772180 612672 1 6 48 220 210 2,088200 612673 1 1 56 247 220 2,798225 612674 1 1 36 277 236 3,950250 612675 1 1 24 310 246 6,700280 615073 1 1 18 347 285 7,400315 612670 1 1 18 390 305 10,040355 615074 1 1 9 445 305 14,600400 615075j 1 1 4 500 320 20,800450 615076j 1 1 4 560 340 30,000500 615124j 1 1 4 630 360 39,800560 616312j 2 1 2 715 380 55,000630 616269j 2 1 2 810 420 79,600710 616313j 2 1 1 900 420 101,000800 616314j 2 1 1 1000 500 138,800

j separate fusion zones

FRIALEN Preisliste

ES 31/12 7

AM Slide-over couplers, SDR 17With exposed heating coils for optimal heat transfer, large insertion depth, extra wide fusion zones plus cold zones at the end and in the middle to pre-vent the flow of molten material for use without holding devices.

PE 100 SDR 17Maximum working pressure 10 bar (water)

.


kg/each110 680001 1 24 192 130 160 0,600125 680013 1 22 176 146 160 0,620160 680002 1 12 96 184 180 1,100180 680003 1 8 64 207 180 1,700200 680004 1 1 56 229 180 3,200225 680005 1 4 32 254 200 2,000250 680006 1 1 33 282 220 3,100280 680007 1 1 32 316 220 3,700315 680008 1 1 24 355 220 4,900355 680009 1 1 20 400 220 6,100400 680010 1 1 12 450 220 7,850450 680011 1 1 6 506 270 8,400500 680012j 1 1 4 562 270 14,900


FRIALEN Preisliste

ES 31/128

UB Slide-over couplers, SDR 17With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With fusion indicators for visual fusion control. The UB d 1000 and above can only be fused with the FRIAMAT XL.

Diameter d 560 - d 900 with pre-heating technology which is required for installation.Special sizes on request


.


kg/each560 615706j 1 1 2 630 380 24,800630 615726j 1 1 2 710 420 36,800710 615994j 1 1 2 800 420 48,600800 616290j 1 1 1 900 500 65,900900 616345j 1 1 1 1024 500 91,5001000 616403j 1 1 1 1130 610 121,0001200 616416j 1 1 1 1356 670 205,000NEW!

NEW!


FRIALEN Preisliste

MB Couplers with removable stopCan also be used as repair couplers. With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.


.


kg/each20 612680 1 110 3.520 33 60 0,04025 612681 1 120 3840 38 66 0,05032 612682 1 60 1920 45 78 0,06440 612683 1 40 1280 54 85 0,10050 612684 1 25 800 68 98 0,15063 612685 1 15 480 82 110 0,22175 612686 1 50 400 98 122 0,32090 612687 1 30 240 114 138 0,440110 612688 1 24 192 137 159 0,710125 612689 1 16 128 156 172 0,950140 612690 1 12 96 174 184 1,270160 612691 1 8 64 199 190 1,770

FRIALONG Long Couplers with removable center stop

L

dD

The coupler with more safety aspects. With exposed heating coils for optimal heat transfer, extra large insertion depth, extra wide fusion zones plus cold zones at the end. For best possible pipe installation and tension-free fusion without holding devices.


.


kg/each32 615736 1 40 1280 45 136 0,11040 615737 1 30 960 54 146 0,14050 615608 1 16 512 68 175 0,25063 615738 1 10 320 82 197 0,370

ES 31/12 9

KM-XL Conical ring couplersEasy and quick assembly, also as slide over coupler and given limited space. Variable diameter range to bridge large tolerance conditions of the outer pipe diameter and out-of-roundness. With flexible fusion conical ring for easy assembly given pronounced pipe out-of-roundness. The installation is made without fixing device and rounding clamp. Mechanical minimisation of the joint gap thanks to flex ring system. Integrated tensioning device for assembly and gap minimisation. Exposed, fixed heating coil, for optimal heat transfer during fusion, broad fusion zones as well as melt flow-inhibiting cold zones at the fronts and the centre for improved pipe guidance and prevention of melt release.

The KM-XL can only be fused with the FRIAMAT XL (see Product Range FRIATOOLS).

Other dimensions or permissible fitting operating pressures as well as special dimensions on request.


.


kg/each1000 616434 2 1 1 1245 1125 350,0001200 616435 2 1 1 1450 1250 500,000

UB PN25 Slide-over couplers PN25With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With fusion indicators for visual fusion control.Processing range SDR 11 – SDR 7.4.

Diameter d 280 and bigger with pre-heating technology (optional use).

PE 100 SDR 7.4Maximum working pressure 25 bar (water)

.


kg/each90 616270 1 30 240 117 138 0,530110 616271 1 24 192 142 159 0,870125 616272 1 16 128 160 172 1,230140 616273 1 12 96 181 184 1,640160 616274 1 8 64 206 203 2,360180 616282 1 6 48 225 210 2,700200 616283 1 2 36 250 224 3,610225 616284 1 1 33 280 240 4,900250 616285 1 1 24 315 246 6,700280 616286j 1 1 18 355 268 9,300315 616287j 1 1 18 400 285 12,100355 616288j 1 1 9 450 300 16,700


FRIALEN Preisliste

NEW!NEW!

NEW!

ES 31/1210

FRIALEN Preisliste

REM Relining Slide-over CouplersFor connection from relining pipe to standard pipe. With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zo-nes at the end and in the transition area to prevent the flow of molten material for use without holding devices. Gap reduction between coupler and pipe possible through special preheating barcode. For processing refer to relining installation instructions. For processing refer to the FRIALEN XL-Assembly Instructions for laying large pipes and relining pipe networks.

With pre-heating barcode


.

d/DN Order Ref. Stock-status BX PU D L Weight

kg/each110/100 615569 2 24 192 127 150 0,680160/150 615571 2 12 96 180 180 1,540315/300 615576 2 1 18 355 285 7,950400/375 616344 2 1 9 450 300 12,315

MV End CapsWith exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end to prevent the flow of molten material, for use without holding devices. From d 180 with fusion indicators for visual fusion control.


.


kg/each20 612025 2 40 2000 31 62 0,04225 612026 2 40 2000 35 65 0,06332 612027j 1 40 1280 44 70 0,06040 612028j 1 25 800 55 75 0,09050 612029 1 20 640 67 80 0,12563 612030 1 15 480 84 88 0,21075 612031 1 20 640 99 99 0,32090 612032 1 30 240 117 155 0,660110 612033 1 24 192 142 181 1,130125 612034 1 16 128 158 186 1,380160 612035 1 8 64 206 262 2,980180 616183 1 6 48 225 195 2,800225 616185 1 4 32 280 230 5,050

j Also recommended as fused caps for the dome of FRIALEN-Pressure Tapping Tees DAA/DAP ≤ d63.

ES 31/12 11

MR Electrofusion ReducersWith exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.


.

d1 d2 Order Ref. Stock-status BX PU D1/D2 L Weight

kg/each32 20 615386 1 80 2560 45/ 32 88 0,06032 25 615502 1 70 2240 45/ 38 88 0,07040 20 615387 1 60 1920 54/ 32 98 0,08040 32 615388 1 50 1600 54/ 45 98 0,09050 20 612069 2 32 1024 68/ 32 110 0,13050 32 612070 1 32 1024 68/ 45 110 0,14050 40 612071 1 25 800 68/ 54 110 0,14063 32 615389 1 18 576 82/ 45 125 0,21063 40 615390 1 16 512 82/ 54 125 0,22063 50 612072 1 16 512 82/ 68 125 0,23090 50 615391 1 15 270 117/ 68 160 0,47090 63 615392 1 15 270 117/ 82 160 0,510110 63 615393 1 10 180 142/ 82 160 0,730110 90 615693 1 8 144 140/115 180 0,900125 90 615694 1 8 144 155/115 200 0,980160 110 615695 1 8 64 201/140 230 1,990225 160 616356 1 1 36 282/203 270 4,860

FRIASTOPP Long Couplers with integrated Mertik Maxitrol excess flow valve

FRIALONG long coupler with integrated SENTRY GS safety equipment which automatically shuts down gas flow in the event of pipe damage caused e.g. by digging or tapping. Exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zones as well as cold zones preventing molten escape at the front and in the centre for processing without holding device. The universal type Z meets all practical requirements of the operating pres-sure range and the required flow quantity. Type D and Z with overflow. DVGW test certificate for Sentry GS excess flow valve:DG-4360BO0438

PE 100 SDR 11Maximum working pressure type Z, B: 5 bar (gas), type D: 1 bar (gas)

.

d Type Order Ref. Operating pressurerange pmin - pmax VN Stock-

status BX PU D L Weightkg/each

32 Z 616187 35 mbar - 5 bar 17 - 40 1 40 1280 45 136 0,14040 Z 616188 35 mbar - 5 bar 26 - 62 1 30 960 54 146 0,22050 Z 616189 35 mbar - 5 bar 41 - 99 1 16 512 68 175 0,38063 Z 616190 35 mbar - 5 bar 66 - 158 1 10 320 82 197 0,53032 D 616191 25 mbar - 1 bar 11 - 16 1 40 1280 45 136 0,14032 B 616192 100 mbar - 5 bar 26 - 60 1 40 1280 45 136 0,14040 D 616193 25 mbar - 1 bar 19 - 27 1 30 960 54 146 0,22040 B 616194 100 mbar - 5 bar 39 - 90 2 30 960 54 146 0,22050 D 616195 25 mbar - 1 bar 28 - 40 1 16 512 68 175 0,38050 B 616196 100 mbar - 5 bar 58 - 135 2 16 512 68 175 0,38063 D 616197 25 mbar - 1 bar 51 - 72 1 10 320 82 197 0,53063 B 616198 100 mbar - 5 bar 94 - 219 2 10 320 82 197 0,530

FRIALEN Preisliste

ES 31/1212

FRIALEN Preisliste

FRIASTOPP Long Couplers with integrated Pipelife Gas-StopTM systemFRIALONG long coupler with integrated Gas-StopTM safety equipment which automatically shuts down gas flow in the event of pipe damage caused e.g. by digging or tapping. Exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zones as well as cold zones preventing molten escape at the front and in the centre for processing without holding device. The universal type U meets all practical requirements of the operating pres-sure range and the required flow quantity. Type A/D and Uue with overflow. DVGW test certificate for Gas-StopTM:DG-4360BP0060

PE 100 SDR 11Maximum working pressure type U, Uue, S: 5 bar (gas), Typ A/D: 1 bar (gas)

.

d Type Order Ref. Operating pressurerange pmin - pmax VN Stock-

status BX PU D L Weightkg/each

32 U 616199 35 mbar - 5 bar 15 - 35 1 40 1280 45 136 0,14032 UUE 616200 35 mbar - 5 bar 15 - 35 1 40 1280 45 136 0,14050 U 616201 35 mbar - 5 bar 35 - 80 2 20 320 68 175 0,35050 UUE 616202 35 mbar - 5 bar 35 - 80 1 20 640 68 175 0,35063 U 616203 35 mbar - 5 bar 55 - 120 2 12 384 82 197 0,56063 UUE 616204 35 mbar - 5 bar 55 - 120 1 12 384 82 197 0,56032 A/D 616205 25 mbar - 1 bar 10 - 14 1 40 1280 45 136 0,14050 A/D 616207 25 mbar - 1 bar 25 - 35 1 20 640 68 175 0,35063 A/D 616209 25 mbar - 1 bar 40 - 55 1 12 384 82 197 0,56032 S 616339 200 mbar - 5 bar 36 - 80 1 40 1280 45 136 0,14050 S 616340 200 mbar - 5 bar 110 - 240 1 20 640 68 175 0,35163 S 616341 200 mbar - 5 bar 180 - 400 1 12 384 82 197 0,558

MR-STOPP Electrofusion Reducers with integrated Mertik Maxitrol excess flow valve

Reducer MR with integrated SENTRY GS safety equipment which automati-cally shuts down gas flow in the event of pipe damage caused e.g. by digging or tapping. Exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zones as well as cold zones preventing molten escape at the front and in the centre for processing without holding device. The univer-sal type Z meets all practical requirements of the operating pressure range and the required flow quantity. Type D and Z with overflow. DVGW test certifi-cate for Sentry GS excess flow valve:DG-4360BO0438

PE 100 SDR 11Maximum working pressure Type Z: 5 bar (gas), Type D: 1 bar (gas)

.

d1 d2 Type Order Ref. Operating pressurerange pmin - pmax VN Stock-

status BX PU D1/D2 L Weightkg/each

50 40 Z 616218 35 mbar - 5 bar 26 - 62 2 12 600 68/54 110 0,21050 40 D 616237 25 mbar - 1 bar 19 - 27 2 12 600 68/54 110 0,21063 32 Z 616219 35 mbar - 5 bar 17 - 40 1 18 576 82/45 125 0,24063 32 D 616238 25 mbar - 1 bar 11 – 16 2 18 576 82/45 125 0,24063 40 Z 616220 35 mbar - 5 bar 26 - 62 2 16 512 82/54 125 0,29063 40 D 616239 25 mbar - 1 bar 19 - 27 2 16 512 82/54 125 0,29063 50 Z 616221 35 mbar - 5 bar 41 - 99 1 16 512 82/68 125 0,36063 50 D 616240 25 mbar - 1 bar 28 - 40 1 16 512 82/68 125 0,360

ES 31/12 13

WS11° I/A Elbows 11°For universal and stress free changes in direction even in restricted spaces. Optimum flexibility through I/A construction type. Elbows of 22°, 33° etc. can be set up thanks to multiple application. Coupler side with exposed heating coils for optimum heat transfer, large insertion depth and wide fusion zone. Spigot for processing with FRIALEN MB or UB couplers.


.


kg/each110 616139 1 8 144 141 235 0,920125 616140 1 5 90 160 250 1,250160 616141 1 8 64 200 295 2,260180 616142 1 4 32 226 310 3,050225 616143 1 1 18 280 350 5,280

W30° Elbows 30°With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.


.


kg/each90 615272 1 8 144 115 224 0,780110 615273 1 6 108 142 252 1,260125 615274 1 4 72 158 270 1,640160 615340 1 5 40 199 350 3,870180 616261 1 3 24 229 390 4,800200 616262 1 1 18 254 412 6,350225 616263 1 1 18 281 456 8,220

FRIALEN Preisliste

ES 31/1214

FRIALEN Preisliste



.


kg/each32 612092 1 45 1440 43 102 0,07040 612094 1 25 800 54 120 0,11050 612096 1 20 640 66 136 0,17563 612098 1 10 320 82 158 0,29575 612100 1 14 252 96 198 0,52090 612102 1 8 144 115 232 0,810110 612104 1 10 80 138 265 1,320125 612106 1 10 80 157 279 1,770160 615275 1 4 32 207 377 4,410180 615687 1 3 24 228 382 4,610200 616264 1 1 18 254 415 6,590225 615688 1 1 32 280 450 8,290

W45° XL Elbows 45° XLWith exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones.


.


kg/each250 616404 1 1 6 310 621 18,210280 616405 1 1 2 350 702 26,760315 616406 1 1 2 396 755 38,560

NEW!NEW!

NEW!

NEW!

ES 31/12 15



.


kg/each25 612091 1 60 1920 37 73 0,06032 612093 1 45 1440 43 82 0,07040 612095 1 25 800 53 96 0,11050 612097 1 20 640 66 113 0,19063 612099 1 8 256 83 136 0,34075 612101 1 12 216 96 170 0,60090 612103 1 6 108 115 202 0,950110 612105 1 10 80 138 234 1,560125 612107 1 8 64 157 254 2,030160 615276 1 3 24 207 329 4,850180 615689 1 3 24 228 354 5,760200 616265 1 2 16 254 392 8,120225 615690 1 1 8 280 430 10,220

W90° XL Elbows 90° XLWith exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones.


.


kg/each250 616408 1 1 6 310 534 20,280280 616409 1 1 2 350 621 31,000315 616410 1 1 2 396 677 40,000

FRIALEN Preisliste

NEW!NEW!

NEW!

NEW!

ES 31/1216

FRIALEN Preisliste

WET Swan Neck BendCompact part for the connection of pipes which are not aligned and for the connection of service lines with DAA pressure valves when parallel-installing two mains with identical overlap height.With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to pre-vent the flow of molten material for use without holding devices.


.

d Order Ref. Stock-status BX PU D L L1

Weightkg/each

32 616051 1 15 750 49 177 74 0,22040 616052 1 15 480 58 215 89 0,33050 616053 1 15 270 70 242 101 0,51063 616054 1 10 180 84 256 106 0,700

WF 90° 90° Elbow with base unitCompact part in HDPE to integrate a hydrant next to the mains. Base unit and elbow make up a homogenous unit, base plate can be mounted onto base. With spigot outlet d 63/SDR 11 for house connections avoiding stagnation at hydrants. For hydrants with flange connection we recommend our Full Faced Flanges EFL. The elbow with separate fusion zones enables simple and ten-sion free fusion. With exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.


.

d d1 Order Ref. Stock-status BX PU H L Weight

kg/each90 63 615989 1 3 54 253 293 2,250110 63 615998j 1 1 32 293 346 2,940

j see FLR flange reducer for connection to DN80

WFGB 90° Elbow with base unit and HD-PE/GGG adapter for connection of BAIO® spigot hydrant

For connection of hydrant with spigot according to BAIO system as alternative to flange connection. Compact construction part manufactured from FRIA-LEN 90° elbow with base (see WF 90°) and BAIO coupler connection made from ductile cast iron including sealing ring. BAIO cast coupler anchored in PE moulded part. Cannot be released or rotated. Please observe specific processing instructions for „BAIO“ connection system.


.

d/DN d1 Order Ref. Stock-status BX PU H L Weight

kg/each110/80 63 616150 2 3 12 418 346 8,340

ES 31/12 17

WFGN 90° Elbow with base unit and HD-PE/GGG adapter for connection of NOVO-Sit® spigot hydrant

For connection of hydrant with cast spigot. Compact construction part ma-nufactured from FRIALEN 90° elbow with base (see WF 90°) and NOVO-Sit coupler connection made from ductile cast iron including Tyton sealing ring and NOVO-Sit ring for push prevention. NOVO-Sit cast coupler anchored in PE moulded part. Cannot be released or rotated. Please observe specific processing instructions for „NOVO-Sit“ connection system.


.

d/DN d1 Order Ref. Stock-status BX PU H L Weight

kg/each110/80 63 616151 2 3 12 424 346 8,460

TGB T-Pieces with HD-PE/GGG adapter for connection of BAIO®

spigot hydrantFor connection of hydrant or cut-off valves with spigot according to the BAIO system as an alternative to flange connection. Compact construction part manufactured from FRIALEN T-piece and BAIO coupler connection at outlet made from ductile cast iron including sealing ring. BAIO cast coupler ancho-red in PE moulded part. Cannot be released or rotated. T-piece with expo-sed heating coils for optimum heat transfer, large insertion depth, wide fusion zone plus cold zone at the end and in the middle to prevent the flow of molten material, for use without holding devices. Please observe specific processing instructions for „BAIO“ connection system. For below floor hydrants the safety device against dirt and disortion for BAIO spigots is required.


.

d/DN Order Ref. Stock-status BX PU H L Weight

kg/each110/80 616147 2 4 16 337 302 7,530125/80 616148 2 3 12 361 314 8,300160/80 616149 2 2 8 380 390 12,000

TGN T-Pieces with HD-PE/GGG adapter for connection of NOVO-Sit® spigot hydrant

For connection of hydrant or cut-off valves with cast spigot. Compact const-ruction part manufactured from FRIALEN T-piece and NOVO-Sit coupler con-nection at outlet made from ductile cast iron including Tyton sealing ring and NOVO-Sit ring for push prevention. NOVO-Sit cast coupler anchored in PE moulded part. Cannot be released or rotated. T-piece with exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zone plus cold zone at the end and in the middle to prevent the flow of molten material, for use without holding devices. Please observe specific processing instruc-tions for NOVO-Sit connection system.


.

d/DN Order Ref. Stock-status BX PU H L Weight

kg/each90/80 616300 2 1 50 343 245 6,610110/80 616144 2 4 16 352 302 7,630125/80 616145 2 3 12 367 314 8,400160/80 616146 2 2 8 422 390 13,640

FRIALEN Preisliste

ES 31/1218

FRIALEN Preisliste

TA (KIT) T-Pieces with extra long outlet spigot in kit version; coupler MB with removeable center stop included

Straight connector with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Extra long outlet spigot dimensioned for 2 fusion operations (if necessary).


.


Weightkg/each

25 616335 1 40 720 36 108 110 0,12432 612161 1 30 540 44 116 131 0,19040 612162 1 20 360 53 146 151 0,29050 612163 1 10 180 67 175 186 0,50063 612164 1 5 90 81 197 203 0,750

T T-PiecesWith exposed heating coils for optimal heat transfer on all 3 sides, large inser-tion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Straight passage fusible in one-step, therefore a total of only two fusions necessary.


.


Weightkg/each

75 612165 1 8 144 96 278 187 0,98090 612166 1 10 80 117 305 211 1,650110 612167 1 6 48 142 355 248 2,580125 612168 1 5 40 160 384 272 3,520160 615277 1 3 24 200 430 315 5,820180 615691 1 2 16 228 480 354 7,900200 616266 1 1 8 251 550 400 11,130225 615692 1 1 8 280 580 430 13,900

ES 31/12 19

T-XL T-Pieces XLWith exposed heating coils for optimal heat transfer on all 3 sides, large inser-tion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones.


.

d Order Ref. Stock-status BX PU D L L1 Weight

kg/each250 616412 1 1 4 315 770 540 27,400280 616413 1 1 1 355 905 630 42,200315 616414 1 1 1 400 940 670 55,900355 616415 1 1 1 450 1055 750 76,000400 616436 1 1 1 500 1140 820 102,000

T red-XL T-Pieces reducedWith exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones. Outlet spigot SDR 11 for processing of UB/MB couplers. Other branch dimensions can be created using MR d 225/160 or MR d 110/90 and MR d 110/63.

Other dimensions on request.

PE 100 SDR 11Maximum working pressure 16 bar (water)/10 bar (gas) outlet spigot pipe SDR11

.

d d1 Order Ref. Stock-status BX PU D L L1 Weight

kg/each250 110 616426 1 1 4 315 770 405 22,100250 225 616427 1 1 4 315 770 440 23,500280 110 616428 1 1 2 355 905 440 34,100280 225 616429 1 1 2 355 905 475 35,500315 110 616430 1 1 1 400 940 485 42,400315 225 616431 1 1 1 400 940 525 43,500

FRIALEN Preisliste

NEW!NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!NEW!

NEW!

NEW!

NEW!

NEW!

ES 31/1220

FRIALEN Preisliste

Y Y-Pieces with integrated heating coils made of PE 100 SDR 11Pipe junction (Y piece) in a compact design with 3 integrated couplers with exposed, fixed heating coils for direct heat transfer to the pipe.

SKZ mark A 500 (SKZ HR 3.26)

Maximum working pressure 16 bar (water).

d Order Ref. Stock-status BX PU Weight

kg/each32-32-40 640034 1 28 504 0,23040-40-50 640036 1 18 324 0,340

YS YS-Pieces with integrated heating coils and PE spigot end made of PE 100 SDR 11

d

d

Pipe junction (Y piece) in a compact design with 2 integrated couplers and a PE spigot end to connect pipes e.g. FRIALEN elbow 90°.

SKZ mark A 500 (SKZ HR 3.26)

Maximum working pressure 16 bar (water).

d Order Ref. Stock-status BX PU Weight

kg/each32-32-40 640035 1 28 504 0,19040-40-50 640037 1 18 324 0,300

RW Repair SleevesFor the repair of house water connection pipes in the depressurised state. Prevents the ingress of water into the fused area of the FRIALEN MB or UB couplers.Measure d means: Repair Sleeves for pipe d xy.Suitable only for pipes SDR 11.

.

d Order Ref. Stock-status BX PU L Weight

kg/each32 615127 1 50 4500 35 0,00440 615128 1 50 4500 35 0,00550 615129 1 50 4500 35 0,00763 615130 1 40 3600 47 0,012

ES 31/12 21

USTR Transition Fittings HD-PE/SteelCompact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material, for use without holding devices. Steel end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in gas systems. Steel pipe sockets marked by restrutting (for use with gas up to 10 bar).Registered by DVGW under registration nos.DV-7501AU2256, DV-7501AU2257 and DV-7501AU2258.

PE 100 SDR 11Maximum working pressure 10 bar (gas)

.


kg/each25/20 612744 1 20 600 40 376 0,84032/25 612780 1 15 450 47 388 1,11540/32 612781 1 10 300 58 396 1,60050/40 612782 1 8 240 70 409 2,10063/50 612783 1 6 180 84 410 2,72075/65 612789 1 4 120 98 425 4,20090/80 612784 1 1 84 118 397 5,310

110/100 612785 1 1 54 143 420 8,380125/100 612786 1 1 46 158 425 8,700160/150 612787 1 1 24 197 484 16,830180/150 615030 1 1 18 227 500 21,250200/200 612795 1 1 12 267 481 27,020225/200 612370 1 1 11 282 459 27,350

USTRS Transition Fittings HD-PE/Steel (Spigot fittings)Compact part. HD-PE end with fused on ends for use with FRIALEN-couplers MB or UB. Steel end permanently anchored in the HD-PE. Self sealing paten-ted sealing geometry without elastomer seal. Little insulating work due to injection moulded protective tube. For use in gas systems. Steel pipe sockets marked by restrutting (for use with gas up to 10 bar).Registered by DVGW under registration nos.DV-7501AU2256 and DV-7501AU2257.


.


kg/each32/25 615475 1 15 450 48,5 465 1,19040/32 615476 1 9 270 57,5 500 1,60050/40 615477 1 8 240 68,5 520 2,40063/50 615478 1 6 180 82,5 540 2,680

FRIALEN Preisliste

ES 31/1222

FRIALEN Preisliste

FGPA FRIAGRIP® PE-AdapterTension-proof* adapter between pipes of different materials (steel, cast iron, ductile cast iron, fibre cement**, PVC) and HD-PE in civil engineering. Fusion end PE100, SDR11. Housing and second ring made from ductile cast iron, Rilsan corrosion protection. Housing and second ring made from ductile cast iron, Rilsan corrosion protection. Screws and nuts in stainless steel. A grip-ping system for all pipe materials: Azetal holding segment, Azetal gripping segment corundum coated. Sealing material NBR. Suitable for diameter to-lerances of max 44 mm. Possible angling of pipes to max 4°.

*) Tension proof water: ≤ DN 300 PN 16, > DN 300 PN 10/tension proof gas: PN 5 **) When processing the coupling side on HD-PE pipes our internal supporting sleeve SHVA is required. For further processing hints see page 3.

Maximum operating pressure: water up to PN 16*, gas PN 5.

d d1 DN Order Ref. Stock-status BX PU L L1 tmin tmax

Weightkg/each

90 85,7-107,0 80 671005 1 1 24 662 496 65 95 6,800110 107,2-133,2 100 671007 1 1 12 685 496 90 115 12,000125 107,2-133,2 100 671008 1 1 12 678 496 90 115 12,700110 132,2-160,2 125 671009 2 1 12 704 496 90 115 13,500125 132,2-160,2 125 671010 2 1 12 698 496 90 115 14,200160 158,2-192,2 150 671011 1 1 8 707 496 90 125 20,600180 158,2-192,2 150 671012 1 1 6 704 496 90 125 23,800225 218,1-256,0 200 671015 1 1 6 728 496 125 165 32,000

USTN Transition Fittings HD-PE/Steel with male threadCompact part. HDPE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HDPE. Self sealing patented sealing geometry without elastomer seal. For use in gas systems. Registered by DVGW under registration nos.DV-7501AU2256 and DV-7501AU2257. Other thread sizes on request


.

d R Order Ref. Stock-status BX PU D L Weight

kg/each20 1/2´´ 612578 1 40 3600 35 95 0,15032 1´´ 612580 1 20 1800 47 119 0,34540 1 1/4´´ 612582 1 20 1000 58 131 0,53050 1 1/2´´ 612584 1 15 750 70 146 0,70063 2´´ 612586 1 10 500 84 152 1,050

ES 31/12 23

USTM Transition Fittings HD-PE/Steel with female threadCompact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in gas systems. Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257. Other thread sizes on request


.

d Rp Order Ref. Stock-status BX PU D L Weight

kg/each32 1´´ 612570 1 20 1800 47 112 0,34040 1´´ 612571 1 20 1000 58 121 0,61040 1 1/4´´ 612572 1 20 1000 58 121 0,50050 1 1/2´´ 612574 1 15 750 70 136 0,65063 2´´ 612576 1 10 500 84 141 1,010

WUSTN 90° Transition Elbows 90° HD-PE/Steel with male thread

Dd

L90°

R Compact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in gas systems. Registered by DVGW under registration nos.DV-7501AU2256 and DV-7501AU2257. Other thread sizes on request


.

d R Order Ref. Stock-status BX PU D L L1

Weightkg/each

40 1 1/4´´ 612602 1 15 750 58 102 144 0,56050 1 1/2´´ 612604 1 10 500 70 118 160 0,77063 2´´ 612606 1 10 320 84 128 176 1,130

FRIALEN Preisliste

ES 31/1224

FRIALEN Preisliste

WUSTM 90° Transition Elbows 90° HD-PE/Steel with female threadCompact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in gas systems. Registered by DVGW under registration nos.DV-7501AU2256 and DV-7501AU2257. Other thread sizes on request


.

d Rp Order Ref. Stock-status BX PU D L L1

Weightkg/each

32 1´´ 612610 1 20 1000 47 85 111 0,36840 1´´ 612611 2 15 750 58 102 130 0,65040 1 1/4´´ 612612 1 15 750 58 102 130 0,54050 1 1/2´´ 612614 1 10 500 70 118 146 0,71063 2´´ 612616 1 10 320 84 128 161 1,115

MUN Transition Fittings HD-PE/Brass with male threadCompact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without hol-ding devices. Brass end permanently anchored in the HD-PE. Self sealing pa-tented sealing geometry without elastomer seal. For use in water systems.Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257.Standard: Brass. Other materials on request Other thread sizes on request


.


kg/each20 1/2´´ 612710 1 40 3600 35 91 0,16025 3/4´´ 612711 1 30 2700 40 99 0,19032 1´´ 612712 1 20 1800 47 112 0,31032 1 1/4´´ 612709 1 20 1800 47 120 0,39032 1 1/2´´ 612698 1 15 1350 47 121 0,45040 1´´ 612721 1 20 1000 58 123 0,48040 1 1/4´´ 612713 1 20 1000 58 126 0,46040 1 1/2´´ 612718 1 20 1000 58 127 0,52040 2´´ 612725 1 20 1000 58 132 0,69050 1´´ 612719 1 15 750 70 134 0,62050 1 1/4´´ 612716 1 15 750 70 136 0,61050 1 1/2´´ 612714 1 15 750 70 137 0,62050 2´´ 612706 1 15 750 70 147 0,76063 1 1/4´´ 612722 1 10 500 84 138 0,91063 1 1/2´´ 612717 1 10 500 84 137 0,90063 2´´ 612715 1 10 500 84 142 0,92075 2´´ 612694 1 10 320 98 165 1,47075 2 1/2´´ 612695 1 10 320 98 167 1,490

ES 31/12 25

MUM Transition Fittings HD-PE/Gunmetal with female threadCompact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Gunmetal end permanently anchored in the HD-PE. Self sealing patented sealing geometry without elastomer seal. For use in water systems. Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257.Standard: Gunmetal. Other materials on request Other thread sizes on request


.

d Rp Order Ref. Stock-status BX PU D L Weight

kg/each32 1´´ 612595 1 20 1800 47 112 0,36040 1 1/4´´ 612596 1 20 1000 58 121 0,52050 1 1/2´´ 612692 1 15 750 70 136 0,65063 1 1/2´´ 612708 1 10 500 84 141 1,23063 2´´ 612693 1 10 500 84 141 1,050

WUN 45° Transition Elbows 45° HD-PE/Brass with male threadCompact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without hol-ding devices. Brass end permanently anchored in the HD-PE. Self sealing pa-tented sealing geometry without elastomer seal. For use in water systems. Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257.Standard: Brass. Other materials on request Other thread sizes on request


.


kg/each32 1´´ 612145 1 20 1000 47 126 0,34040 1 1/4´´ 612149 1 15 750 58 140 0,49040 1 1/2´´ 612139 1 15 750 58 142 0,54050 1 1/2´´ 612144 1 10 500 70 163 0,66063 1 1/2´´ 612147 1 10 320 84 176 0,95063 2´´ 612146 1 10 320 84 178 0,980

FRIALEN Preisliste

ES 31/1226

FRIALEN Preisliste

WUN 90° Transition Elbows 90° HD-PE/Brass with male thread

Dd

L90°

R Compact part. HD-PE end with exposed heating coils for optimal heat trans-fer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without hol-ding devices. Brass end permanently anchored in the HD-PE. Self sealing pa-tented sealing geometry without elastomer seal. For use in water systems. Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257.Standard: Brass. Other materials on request Other thread sizes on request


.


kg/each32 1´´ 612120 1 20 1000 47 85 0,34032 1 1/2´´ 612140 1 20 1000 47 94 0,47040 1´´ 612127 1 15 750 58 102 0,50040 1 1/4´´ 612122 1 15 750 58 102 0,52040 1 1/2´´ 612121 1 15 750 58 102 0,56050 1´´ 612119 1 10 500 70 118 0,68050 1 1/4´´ 612123 1 10 500 70 118 0,67050 1 1/2´´ 612124 1 10 500 70 118 0,68063 1 1/2´´ 612125 1 10 320 84 128 0,98063 2´´ 612126 1 10 320 84 128 1,000

UAN Universal adapters HD-PE/Brass with male threadCompact part. HD-PE side as pipe socket allows for assembly independent of length and homogenous fusion connection with all suitable FRIALEN moul-ded parts. Brass side is connected with PE pipe socket permanently and tightly. Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257. Other thread sizes on request


.

d R Order Ref. Stock-status BX PU L Weight

kg/each32 1´´ 616152 1 30 2700 122 0,23040 1 1/4´´ 616153 1 20 1800 136 0,43050 1 1/2´´ 616154 1 16 1440 118 0,59063 2´´ 616155 1 12 600 132 0,940

ES 31/12 27

UAM Universal adapters HD-PE/Brass with female threadCompact part. HD-PE side as pipe socket allows for assembly independent of length and homogenous fusion connection with all suitable FRIALEN moul-ded parts. Brass side is connected with PE pipe socket permanently and tightly. Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257. Other thread sizes on request


.

d Rp Order Ref. Stock-status BX PU L Weight

kg/each32 1´´ 616156 1 30 2700 121 0,27040 1 1/4´´ 616157 1 20 1800 134 0,44050 1 1/2´´ 616158 1 16 1440 113 0,53063 2´´ 616159 1 12 600 128 0,910

UFLG Transition Fitting for liquid gas HD-PE/CopperCompact part as material reducer in domestic area of liquid gas supply in-stallations for the operating of consumer installations from the gas phase. Copper-side not detachable and anchored in HD-PE with no risk of turning. Self-sealing, patented density geometry without elastomere sealing. Cop-per-side from SF Cu-F25, DIN EN 1057 can be connected with the copper pipe through hard-soldering (coupler soldering).Registered by DVGW under registration no. DV-7501AU2256.


.


kg/each32/20 615733 1 25 750 49 340 0,510

FRIALEN Preisliste

ES 31/1228

FRIALEN Preisliste

EFL Full Faced Flanges (Spigot fittings)Flange Adaptor and flange as a factory made flange piece. Metal insert in the flange to prevent creep. Spigot end for use with FRIALEN-couplers MB or UB. Flange connection dimensions to DIN 2501, part 1. GST sealing re-commended.Additional washers are necessary.


.

d/DN Order Ref. Stock-status BX PU D di dk L Ø k Holes for

screwWeightkg/each

63/ 50 615417 1 5 250 169 50.6 16.5 105 125 4 1,50090/ 80 615418 1 5 160 204 71.5 16.5 130 160 8 2,540

110/100 615419 1 3 96 224 86.8 16.5 150 180 8 3,310125/100 615605 1 2 64 224 101 16.5 160 180 8 3,280160/150 615421 1 2 36 288 127 20.5 190 240 8 6,140180/150 615927 1 2 36 288 122.5 20.5 200 240 8 6,660225/200 615607j 1 1 27 343 179.5 20.5 225 295 8 9,100

j Hole PN 10.

FLT Flange T-PiecesCompact part in HD-PE. Factory made combination made from FRIALEN-T-Piece, Reducer and Full Faced Flanges (fixed flange). T-Piece with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material for use without holding devices.No inner fusion ridge on the fused seam of the reducer. Flange connection dimensions to DIN 2501, part 1. GST sealing recommended.Additional washers are necessary for the flange reducer.


.

d/DN Order Ref. Stock-status BX PU D dk H L Ø k Holes for

screwWeightkg/each

110/80 615590 1 4 32 204 16.5 316 355 160 8 4,920125/80 615591 1 3 24 204 16.5 343 384 160 8 5,480160/80 615592 1 2 16 204 16.5 390 430 160 8 8,050180/80 615910 1 1 8 204 16.5 416 480 160 8 10,000


.

d/DN Order Ref. Stock-status BX PU D dk H L Ø k Holes for

screwWeightkg/each

225/80 616031 1 2 4 204 16.5 465 580 160 8 15,420

ES 31/12 29

FLR Flange ReducerCompact part manufactured by factory from HD-PE reducer and FRIALEN EFL Full Face Flanges. Specially suited for the horizontal connection of flange valves to FRIALEN T-pieces T for reduced branches in DN 80 and DN 100. For the vertical connection of hydrants using our elbow including foot support WF 90° or the T-piece T, the overlapping height must be taken into conside-ration. No internal welding bead at the weld seam of the reduction. Flange connection measurements according to DIN 2501, part 1. We recommend GST seals. Additional washers are necessary.


.

d/DN Order Ref. Stock-status BX PU D dk L Ø k Holes for

screwWeightkg/each

110/80 616065 1 3 96 204 16.5 161 160 8 3,500160/100 616241 1 2 64 224 16.5 180 180 8 4,060225/100 616242 1 2 36 224 16.5 270 180 8 5,390

RS Reinforcing SaddleCompact part manufactured from 2 HD-PE saddles for the repair of minor pipe damage with no escape of fluid. With exposed heating elements for optimal heat transfer.


.

d1 Order Ref. Stock-status BX PU H Weight

kg/each63 612519 1 20 360 105,5 0,260

VVS Repair and Reinforcing SaddlesCompact part manufactured from 2 HD-PE saddles for the repair of minor pipe damage with or without escape of fluid. In order to avoid discharge of media the leak has to be sealed with a separate plug* (< d3). With exposed heating elements for optimal heat transfer.

*The plug is not included in the scope of delivery.


.

d1 Order Ref. Stock-status BX PU H Weight

kg/each90 615164 1 24 192 148 0,920110 615165 1 16 128 168 1,250125 615166 1 15 120 183 1,360160 615168 1 10 80 218 1,670180 615169 1 6 48 238 1,810200 615170 1 5 40 258 1,820225 615171 1 5 40 283 1,900

FRIALEN Preisliste

ES 31/1230

FRIALEN Preisliste

RS-XL Repair Saddles RS-XLFor the repair of damages such as scratches, grooves or pipe penetration. Compact fitting made of HD-PE. Saddle with exposed heating element for op-timal heat transfer. For assembly with FRIATOOLS clamping unit VACUSET XL (see Product Range FRIATOOLS). With swell indicator for visual control of fusion.The damage must be within the specified repair area dR and may not be co-vered by the fusion zone.


.

d1 Order Ref. Stock-status BX PU Repair area

dR

Weightkg/each

560 616367 2 1 230 10,500630 616368 2 1 230 13,500710 616369 2 1 230 17,000800 616370 2 1 230 18,000900 616371 2 1 230 20,0001000 616372 2 1 230 20,000

VSC-TL Repair Saddle Top-LoadingSuitable for all pipe diameters in the given range by means of the FRIALEN-FRIATOP Clamping Unit (see Product Range FRIATOOLS). HD-PE saddle for the repair of minor pipe damage with or without escape of fluid. In order to avoid discharge of media the leak has to be sealed with a separate plug* (< d3). With exposed heating element for optimal heat transfer.

*The plug is not included in the scope of delivery.


.

d1 Order Ref. Stock-status BX PU d3

Weightkg/each

250-560 615397 1 10 180 50 0,570

NEW!

NEW!NEW!

NEW!

NEW!

NEW!

NEW!

ES 31/12 31

SA Spigot SaddlesCompact part in HD-PE, saddle with exposed heating element for optimal heat transfer and outlet spigot for use with FRIALEN-couplers MB or UB. Swarfless tapping in the depressurised state by means of commercial drilling units (we recommend Hütz & Baumgarten (www.huetz-baumgarten.de)).


.

d1 d2 Order Ref. Stock-status BX PU d3

DrillingØ da

L Weightkg/each

63 32 612757 1 20 360 22 20 100 0,33063 50 612759 1 20 360 37 36 113 0,37075 50 615020 1 15 270 38 36 82 0,43090 32 615285 1 20 160 21 20 103 0,70090 63 612819 1 20 160 50 46 103 0,720110 32 615334 1 12 96 21 20 109 0,860110 50 615031 1 12 96 38 36 109 0,860110 63 612760 1 12 96 49 46 109 0,900110 90 615411 1 12 96 70 65 115 0,960125 32 615087 1 12 96 21 20 109 0,945125 63 612761 1 12 96 47 46 109 0,990125 90 615412 1 12 96 70 65 116 1,080125 110 615584 1 10 80 86 84 116 1,150160 32 612886 1 8 64 21 20 126 1,440160 63 612762 1 6 48 47 46 140 1,520160 90 615413 1 2 36 70 65 140 1,640160 110 615739 1 2 36 86 84 140 1,765160 125 615585 1 2 36 98 95 140 1,880180 63 612763 1 6 48 47 46 109 1,190180 90 615414 1 2 36 70 65 116 1,820180 110 615948 1 2 36 86 84 136 1,960180 125 615740 1 2 36 98 95 141 2,110200 63 612764 1 5 40 47 46 109 1,260225 63 612765 1 5 40 47 46 109 1,210225 90 615415 1 5 40 70 65 130 1,950225 110 616044 1 5 40 86 84 140 1,960225 125 616045 1 4 32 97 95 146 2,240225 160 616046 1 4 32 125 123 157 2,580

FRIALEN Preisliste

ES 31/1232

FRIALEN Preisliste

SA-TL Spigot Saddles Top-LoadingSuitable for all pipe diameters in the given range by means of the FRIALEN-FRIATOP Clamping Unit (see Product Range FRIATOOLS). Compact part in HD-PE. Saddle with exposed heating element for optimal heat transfer and outlet spigot for use with FRIALEN-couplers MB or UB. Swarfless tapping in the depressurised state by means of commercial drilling units (we recom-mend Hütz & Baumgarten (www.huetz-baumgarten.de)). d3 = maximum tapping diameter in mm


.


DrillingØ da

L Weightkg/each

250-560 32 615465 1 5 90 21 20 109 0,620250-560 63 615466 1 5 90 47 46 109 0,680250-560 90 615850 1 5 90 61 60 111 0,770

SA-XL Spigot Saddles SA-XLFor integration of a branch line or vent in PE pipelines with large diameters –unpressurised or under operating pressure. Compact component part made of HD-PE. Saddle with exposed heating element for optimal heat transfer. Outlet spigot for processing with FRIALEN couplers MB or UB. Assembly withFRIATOOLS clamping unit VACUSET XL (see Product Range FRIATOOLS).Tapping in unpressurised condition with FRIATOOLS tapping kit FWAB XL (see Product Range FRIATOOLS). With swell indicator for visual control of fusion.

* with MR 225/160 reducible (Order Ref. 616356)


.

d1 d2 Order Ref. Stock-status BX PU Drilling

Ø daL Weight

kg/each315 225 (*160) 616387 1 1 4 172 233 11,300315 250 616398 1 1 4 187 233 11,150355 225 (*160) 616388 1 1 4 172 235 10,800355 250 616399 1 1 4 187 235 10,650450 225 (*160) 616390 1 1 4 172 272 11,600450 250 616401 1 1 4 187 272 11,450


.


Ø daL Weight

kg/each560 160 616373 2 1 123 300 11,750630 160 616374 2 1 123 300 14,500710 160 616375 2 1 123 300 17,500800 160 616376 2 1 123 300 18,500900 160 616377 2 1 123 300 20,7501000 160 616378 2 1 123 300 21,000

NEW!

NEW!NEW!

NEW!

NEW!

NEW!

NEW!

NEW!NEW!

NEW!

NEW!

NEW!

NEW!

ES 31/12 33

SAB Spigot Saddles with integral drillCompact part in HD-PE, saddle with exposed heating element for optimal heat transfer and outlet spigot for use with FRIALEN-couplers MB or UB. Swarfless tapping in the depressurised state by means of the integral drill.


.


Ø daL Weight

kg/each63 32 615091j 1 20 360 21 100 0,42090 32 615092 1 20 160 21 89 0,760110 32 615093 1 12 96 21 109 0,930125 32 615094 1 12 96 21 109 1,030160 32 615095 1 6 48 21 109 1,200

j Saddle parts d 63 can only be processed using pipes up to SDR11.

SAFL Spigot Saddles with flange outletD

d3

z

d1

b

k

Compact part in HD-PE. Manufactured combination of FRIALEN spigot sadd-le, coupler and FRIALEN Full Faced Flanges EFL (compact flange). Saddle with exposed heating coil for optimum heat transfer. Tapping in pressure free condition or, using an additional isolating valve, under operating pressure by means of standard tapping equipment (we recommend Hütz & Baumgarten (www.huetz-baumgarten.de)). Flange connection measurements according to DIN 2501, part 1. We recommend GST gaskets.Additional washers are necessary for the flange reducer.


.

d1/DN Order Ref. Stock-status BX PU D dk

DrillingØ da

Ø k Holes forscrew

Weightkg/each

110/80 616016 1 3 54 204 16.5 65 160 8 3,700125/80 616017 1 2 36 204 16.5 65 160 8 3,940160/80 616018 1 2 36 204 16.5 65 160 8 4,320180/80 616019 1 2 36 204 16.5 65 160 8 4,610225/80 616020 1 2 16 204 16.5 65 160 8 4,720

125/100 616021 1 2 36 224 16.5 84 180 8 4,770160/100 616022 1 2 36 224 16.5 84 180 8 5,270180/100 616023 1 2 36 224 16.5 84 180 8 5,520225/100 616024 1 2 16 224 16.5 84 180 8 5,635

FRIALEN Preisliste

ES 31/1234

FRIALEN Preisliste

DAA (KIT) Pressure Tapping Tees with extra long outlet spigot in kit versionFor leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Inte-gral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. End plugs with internal O-ring seal. Fusible dome (d1 63 and 75 = MV d 40; d1 ≥ d 90 = K). Pressure test possi-ble before tapping. For pressure test adapter and actuating key see Product Range FRIATOOLS. Length of the outlet spigots dimensioned for 2 fusion operations (if necessary).


.


DrillingØ da

L Weightkg/each

63 32 615649 1 16 288 40 21 100 0,55075 32 615651j 1 12 216 40 21 100 0,78090 20 615653j 2 12 96 50 30 116 1,07590 25 615654j 2 12 96 50 30 116 1,08090 32 615655 1 12 96 50 30 116 1,08090 40 615656j 1 12 96 50 30 116 1,240110 32 615661 1 10 128 50 30 116 1,290110 40 615662j 1 10 128 50 30 116 1,490110 50 615663 1 10 128 50 30 116 1,500125 32 615667 1 10 80 50 30 116 1,490125 40 615668j 1 10 80 50 30 116 1,570160 20 615672j 2 6 48 50 30 162 1,910160 25 615673j 2 6 48 50 30 162 1,920160 32 615674 1 6 48 50 30 162 1,910160 40 615675j 1 6 48 50 30 162 2,081

j with electrofusion reducers d 32/20, d 32/25, d 40/32 or d 50/40.

ES 31/12 35

DAA Pressure Tapping Tees with extra long outlet spigotFor leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With expo-sed heating element for optimal heat transfer. End plug with internal O-ring seal. Fusible dome (d3 32 = MV d 32; d3 40 = MV d 40; d3 50 = K). Leakage check possible before tapping. For pressure test adapter and actuating key see Product Range FRIATOOLS. Length of the outlet spigots dimensioned for 2 fusion operation (if necessary).


.


DrillingØ da

L Weightkg/each

40 20 612630 2 20 640 32 16 74 0,29050 25 612702 2 20 360 40 21 98 0,45050 32 615080 1 20 360 40 21 98 0,45063 20 612631 1 16 288 40 21 98 0,48063 25 612633 1 16 288 40 21 98 0,47063 32 612632 1 16 288 40 21 98 0,48063 40 612623 1 16 288 40 21 98 0,50063 63 616334 1 20 160 50 30 127 1,02075 40 612813 1 12 216 40 21 98 0,66090 32 612634 1 12 96 50 30 125 1,01090 50 612636 1 12 96 50 30 125 1,09090 63 612701 1 12 96 50 30 125 1,145110 32 612637 1 10 80 50 30 121 1,230110 50 612638 1 10 80 50 30 121 1,310110 63 612624 1 10 80 50 30 121 1,400125 32 612649 1 10 80 50 30 122 1,380125 50 612639 1 10 80 50 30 122 1,430125 63 612309 1 10 80 50 30 122 1,505140 50 615037 2 10 80 50 30 122 1,410160 32 612641 1 6 48 50 30 165 1,850160 50 612642 1 6 48 50 30 165 1,930160 63 612650 1 6 48 50 30 165 1,970180 32 612651 1 5 40 50 30 165 1,890180 50 612644 1 5 40 50 30 165 1,930180 63 612652 1 5 40 50 30 165 1,970200 32 612654 1 5 40 50 30 165 1,790200 50 612645 1 5 40 50 30 165 1,860200 63 612659 1 5 40 50 30 165 1,920225 32 612657 1 5 40 50 30 165 1,800225 50 612646 1 5 40 50 30 165 1,870225 63 612655 1 5 40 50 30 165 1,930

FRIALEN Preisliste

ES 31/1236

FRIALEN Preisliste

DAP Pressure Tapping Tees with parallel domeand extra long outlet spigot

For space saving horizontal installation. Leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. End plugs with internal O-ring seal. Fusible dome (d3 40 = MV d 40; d3 50 = K). Pressure test possible before tapping. For pressure test adapter and actuating key see Product Range FRIATOOLS. Length of the outlet spigots dimensioned for 2 fusion operations (if necessary).


.


DrillingØ da

L Weightkg/each

63 32 616042 1 16 288 40 21 125 0,63090 32 616043j 1 16 128 50 30 115 1,100110 32 615581 1 12 96 50 30 158 1,280110 50 615606 1 12 96 50 30 158 1,380125 32 615711 1 12 96 50 30 158 1,310125 50 615712 1 12 192 50 30 158 1,360160 32 615713 1 8 64 50 30 170 1,540160 50 615714 1 8 64 50 30 170 1,560180 32 615715 1 6 48 50 30 170 1,540180 50 615716 1 6 48 50 30 170 1,560225 32 615717 1 6 48 50 30 170 1,570225 50 615718 1 6 48 50 30 170 1,590

j max. working pressure 10 bar (water)/5 bar (gas)

DAA-TL Pressure Tapping Tee Top-Loading with extra long outlet spigot

L

Suitable for all pipe diameters in the given range by means of the FRIALEN FRIATOP clamping unit (see Product Range FRIATOOLS). Leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. End plugs with internal O-ring seal. Fusible dome (d3 50 = K). Pressure test possible before tapping. For pressure test adapter and actuating key see Product Range FRIATOOLS. Length of the outlet spigots dimensioned for 2 fusion operations (if necessary). Other outlet dimensions with electrofusion reducers MR


.


DrillingØ da

L Weightkg/each

250-315 (400) 63 615339j 1 5 90 50 30 167 1,360

j d1: d 250 up to d 315 for pipes SDR 11 and 17; d1: > d 315 up to d 400 for pipes SDR 17

ES 31/12 37

DAA-TL/RE Pressure Tapping Tee Top-Loading with extra long outlet spigot

L

Suitable for all pipe diameters in the given range by means of the FRIALEN FRIATOP clamping unit (see Product Range FRIATOOLS). Leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. End plugs with internal O-ring seal. Fusible dome (d3 50 = K). Pressure test possible before tapping. For pressure test adapter and actuating key see Product Range FRIATOOLS. Length of the outlet spigots dimensioned for 2 fusion operations (if necessary). Other outlet dimensions with electrofusion reducers MR


.


DrillingØ da

L Weightkg/each

> 98-130 50 615527 2 20 160 50 30 125 0,800> 130-160 50 615528 2 12 96 50 30 121 1,040> 160-210 63 615531 2 5 90 50 30 167 1,230

250-315 (400) 63 615339j 1 5 90 50 30 167 1,360

j d1: d 250 up to d 315 for pipes SDR 11 and 17; d1: > d 315 up to d 400 for pipes SDR 17

K Cap for Pressure Tapping TeesWith exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end to prevent the flow of molten material.


.


kg/each50 612310 1 30 960 69 72 0,110

FRIALEN Preisliste

ES 31/1238

FRIALEN Preisliste

VAM-RG Valve Tapping Saddles with HD-PE/Gunmetal adapter,female thread

Compact part in HD-PE, saddle with exposed heating element for optimal heat transfer. Gunmetal adapter permanently anchored in the HD-PE. To ac-cept normal commercial brass valves. As a complete solution we recommend our Pressure Tapping Valve DAV (see page 42). Transition DVGW approved.Reg. Nos. DV-7501AU2257 and DV-7501AU2258


.


kg/each63 1 1/4´´ 612794 2 20 360 73 0,73063 1 1/2´´ 612743 2 20 360 76 0,78075 1 1/4´´ 615213 2 15 270 76 0,85090 1 1/2´´ 612798 2 16 128 68 1,37090 2´´ 612778 2 16 128 95 1,560110 1 1/2´´ 612732 1 12 96 68 1,520110 2´´ 612733 1 12 96 95 1,730125 1 1/2´´ 612734 2 12 96 68 1,610125 2´´ 612735 1 12 96 95 1,850160 1 1/2´´ 612728 2 8 64 68 1,800160 2´´ 612729 1 8 64 95 2,040180 1 1/2´´ 612774 2 7 56 68 1,780180 2´´ 612776 2 7 56 95 1,990225 2´´ 612827 2 5 40 95 1,990

VAM-RG-TL Valve Tapping Saddle Top-Loading with HD-PE/Gunmetal adapter, female thread

Suitable for all pipe diameters in the given range by means of the FRI-ALEN-FRIATOP Clamping Unit (see Product Range FRIATOOLS Technical Equipment). HD-PE saddle with exposed heating element for optimal heat transfer. Gunmetal adapter permanently anchored in the HD-PE. To accept normal commercial brass valves.Dimension range d 250 – d 560 fusible as standard using the top-loading method. Please note the maximum permissible wall thickness for tapping in the dimension range > d 315 - d 560.If required, please contact the manufacturer of the tapping equipment. As a complete solution we recommend our Pressure Tapping Valve DAV-TL (see page 41). Transition DVGW approved. Reg. No. DV-7501AU2258


.


kg/each250-315 (560) 2´´ 615470 2 10 180 90 1,505

ES 31/12 39

SPA Shut off SaddlesCompact part suitable for normal commercial Shut off equipment. HD-PE saddle with exposed heating element for optimal heat transfer. Brass-guide thread permanently and immovably anchored in the HD-PE. Includes brass plugs with square recess. Protection against access to the dome by fusing on a FRIALEN-SPAK (when using d 63 through cap K). Thread to DIN ISO 228.


.

d1 R Rp Order Ref. Stock-status BX PU Drilling

Ø daL Weight

kg/each63 G 1 1/2 G 1 1/8 612753j 1 20 360 31,0 80 0,61090 G 2 1/2 G 2 612677 1 16 128 56,5 110 1,480110 G 2 1/2 G 2 612750 1 12 96 56,5 110 1,650125 G 2 1/2 G 2 612751 1 12 96 56,5 110 1,800160 G 2 1/2 G 2 612752 1 8 64 56,5 110 1,940180 G 2 1/2 G 2 612754 1 7 56 56,5 110 1,940200 G 2 1/2 G 2 612755 1 6 48 56,5 110 1,910225 G 2 1/2 G 2 612756 1 5 40 56,5 110 1,920

j Shut off Saddles d 63 may only be processed using pipes up to SDR 11.

SPA-TL Shut off Saddle Top-LoadingSuitable for all pipe diameters in the given range by means of the FRI-ALEN-FRIATOP Clamping Unit (see Product Range FRIATOOLS Technical Equipment). Compact part to accept normal commercial bubble setting units. HD-PE saddle with exposed heating element for optimal heat transfer. Brass guide thread permanently anchored in the HD-PE. Includes brass plugs with a square recess. Access protection for dome through screw-cap flap supplied or through fusing on of a FRIALEN-SPAK. Thread to DIN ISO 228.

Dimension range d 250 – d 560 fusible as standard using the top-loading method. Please note the maximum permissible wall thickness for tapping in the dimension range > d 315 - d 560.If required, please contact the manufacturer of the tapping equipment. Please note indications by shut-off saddles manufacturer.


.

d1 R Rp Order Ref. Stock-status BX PU Drilling

Ø daL Weight

kg/each250-315 (560) G 2 1/2 G 2 615395 1 18 144 56,5 110 1,400

FRIALEN Preisliste

SPAK Cap for Shut off SaddlesWith exposed heating coils for optimal heat transfer, large insertion depth, extra wide fusion zone plus cold zones at the end to prevent the flow of molten material.


.


kg/each75 612311 1 20 640 99 99 0,280

ES 31/1240

FRIALEN Preisliste

DAV (KIT) Pressure Tapping Valves with extra long outlet spigot in kit versionCompact part in HD-PE with no threaded connections. Actuating spindle in stainless steel 1.4305. No re-insulating required. Leak free and swarfless tap-ping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. Maintenance free, operating isolating valve actuated by a linkage (e.g. FRIALEN- EBS). Length of the outlet spigot dimensioned for 2 fusion operations (if necessary). Four cornered shaft wrench size 14.Registered by DVGW under registration no. DV-6611AU7039, DV-6611AU2254 and DV-6611AU2255.


.


Ø daL Weight

kg/each63 32 615614 1 16 288 20 160 0,98063 40 615615 1 16 288 20 160 1,05090 32 615616 1 12 96 30 200 1,89090 40 615617j 1 12 96 30 200 2,020110 32 615620 1 10 80 30 190 2,140110 40 615621j 1 10 80 30 190 2,230110 50 615622 1 10 80 30 190 2,230110 63 615623 1 10 80 30 190 2,380125 32 615624 1 10 80 30 190 2,150125 40 615625j 1 10 80 30 190 2,300125 50 615626 1 10 80 30 190 2,280125 63 615627 1 10 80 30 190 2,450160 32 615628 1 6 48 30 245 2,820160 40 615629j 1 6 48 30 245 2,980160 50 615630 1 6 48 30 245 2,980160 63 615631 1 6 48 30 245 3,110180 32 615632 1 5 40 30 245 2,880180 40 615633j 1 5 40 30 245 3,060225 32 615640 1 5 40 30 248 2,890225 40 615641j 1 5 40 30 248 3,010

j with electrofusion reducers MR d 50/40.

ES 31/12 41

DAV-TL Pressure Tapping Valves Top-Loading with extra long outlet spigotFor flexible adaptation to all pipe diameters in indicated range by means of the FRIALEN FRIATOP Clamping device (see Product Range FRIATOOLS Technical Equipment). Stainless steel activating spindle 1.4305. No further insulation necessary. Leak and swarf free tapping up to 10 bar (gas) and 16 bar (water). Integrated drill with upper and lower stop, guided in a metal slee-ve. With exposed heating coils for optimal heat transfer. Maintenance free, operating isolating valve actuated by a linkage (e.g. FRIALEN-EBS). Length of the outlet spigot dimensioned for 2 fusion operations (if necessary). Four cornered shaft wrench size 14.


.


Ø daL Weight

kg/each250-315 50 615589j 2 10 80 30 245 2,260355-400 50 616437j 2 10 80 30 245 2,264

DAV Pressure Tapping Valves with extra long outlet spigot

d2

L

d1

Compact part in HD-PE with no threaded connections. Actuating spindle in stainless steel 1.4305. No re-insulating required. Leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. Maintenance free, operating isolating valve actuated by a linkage (e.g. FRIALEN- EBS). Length of the outlet spigots dimensioned for 2 fusion operations (if necessary). Four cornered shaft wrench size 14.Registered by DVGW under registration no. DV-6611AU7039, DV-6611AU2254 and DV-6611AU2255.


.


Ø daL Weight

kg/each50 32 615955 1 16 288 20 160 0,86063 32 615341 1 16 288 20 160 0,92063 40 615342 1 16 288 20 160 0,93075 32 615956 1 12 216 20 160 1,04090 32 615344 1 12 96 30 200 1,78090 50 615346 1 12 96 30 200 1,83090 63 615347 1 12 96 30 200 1,895110 32 615348 1 10 80 30 190 2,020110 50 615350 1 10 80 30 190 2,090110 63 615351 1 10 80 30 190 2,160125 32 615352 1 10 80 30 190 2,100125 50 615354 1 10 80 30 190 2,130125 63 615355 1 10 80 30 190 2,240140 63 615930 1 10 80 30 190 2,220160 32 615356 1 6 48 30 245 2,760160 50 615358 1 6 48 30 245 2,840160 63 615359 1 6 48 30 245 2,900180 32 615361 1 5 40 30 245 2,770180 50 615363 1 5 40 30 245 2,880180 63 615364 1 5 40 30 245 2,920200 32 615366 1 5 40 30 248 2,800200 50 615368 1 5 40 30 248 2,850200 63 615369 1 5 40 30 248 2,940225 32 615374 1 5 40 30 248 2,820225 50 615376 1 5 40 30 248 2,870225 63 615377 1 5 40 30 248 2,920

FRIALEN Preisliste

ES 31/1242

EBS Installation kits for Pressure Tapping ValvesTelescopic actuating linkage for operation of the FRIALEN-DAV from the street cap. Stepless adjustment in the stated range (RD) without the use of tools, even in the installed state. Self supporting in any extended position. Corrosion proof. Dimension RD valid for DAV d1 = 90 – 125.For DAV d1 < 90 please deduct 50 mm and for d1 > 125 please add 50 mm.(See also dimension L of the DAV)

.

RD in m Order Ref. Stock-status BX PU SW1

Weightkg/each

0,45-0,7 615866 1 1 42 14 1,5000,7-1,0 615867 1 1 42 14 1,9500,9-1,3 615335 1 1 42 14 2,4501,2-1,8 615325 1 1 42 14 3,350

FRIALEN Preisliste

ES 31/12 43

FRIALOC Water Shut-Off Valve with shut-off mechanism suitable for plasticsApplication: Water

Facilitates the completely fused and homogeneous PE piping. Thanks to the innovative mechanism, a reliable shut-off can be achieved with only 9 or 14 turns and without major force. The drive is a very low-wear drive. A forced flushing prevents dead spaces and stagnation. The small sealing area mi-nimises biological growth. The free passage corresponds to the connecting pipe SDR 11 (except d 225). Each individual FRIALOC PE shut-off valve is subjected to comprehensive tests at the factory. The valve is operated using the installation kit FBS.Four cornered shaft wrench size 19. Registered by DVGW under registration no. DW-6210BT0171.


.

d d2 Order Ref. Stock-status BX PU H L Weight

kg/each90 80 616293 1 1 8 450 720 13,900110 80 616294 1 1 8 450 720 14,200125 80 616295 1 1 8 450 720 14,500160 80 616296 1 1 2 608 1010 39,000180 80 616297 1 1 2 608 1030 39,800225 80 616298j 2 1 2 608 1060 45,500

j limited passage corresponds to dim. d 180

FBS Installation kits FBS for FRIALOC® PE shut-off valves with KlickFix® system.

To operate the FRIALOC PE shut-off valve from the surface box. Optimally matched, can be individually extended to the required covering height. With KlickFix coupler for easy installation. Made of galvanised steel or stainless steel.

bars of hot zinc dipped steel.


Weightkg/each

0,75 - 1,0 616308 2 1 42 30 2,5000,9 - 1,3 616309 1 1 42 30 2,9501,2 - 1,8 616310 1 1 42 30 3,8501,5 - 2,3 616318 2 1 42 30 4,400

bars of stainless steel.


Weightkg/each

0,75 - 1,0 616315 2 1 42 30 2,4000,9 - 1,3 616316 1 1 42 30 2,8001,2 - 1,8 616317 1 1 42 30 3,4501,5 - 2,3 616319 2 1 42 30 4,1502,4 - 3,5 616326 2 1 50 30 6,350

FRIALEN Preisliste

KHP Ball Valves in HD-PE, 1/4 turnCompact part in HD-PE with spigots for use with FRIALEN-couplers MB or UB. No corrosion proofing required. Open and closed position with definite stop. Maintenance free, with operating isolating valve actuated by a linkage (e.g. FRIALEN-BS).Registered by DVGW under registration nos. DG-8631AU2251, DG-8631AU2252 and DG-8631AU2253.


.

d Order Ref. Stock-status BX PU H L SW1 SW2

Weightkg/each

32 612490 1 1 170 129 310 50 x 50 19 0,65040 612497 1 1 170 129 310 50 x 50 19 0,70050 612492 1 1 170 129 310 50 x 50 19 0,75063 612494 1 1 50 195 417 50 x 50 25 2,38090 612495 1 1 24 245 545 50 x 50 25 4,700110 612493 1 1 24 245 545 50 x 50 25 5,100125 612496 1 1 24 245 545 50 x 50 25 5,400160 612483 1 1 8 329 544 50 x 50 25 12,800180 615309 1 1 8 329 544 50 x 50 25 13,100200 612480 1 1 8 329 544 50 x 50 25 14,100225 616186 1 1 8 332 530 50 x 50 25 15,000

KH Ball Valves made from HD-PE, 1/4 turn, full portCompact construction part made from HD-PE with spigots for processing with FRIALEN MB or UB couplers. Valve passage without construction in line with internal diameter of pipe socket. No corrosion prevention measures necessa-ry. Open and closed position at defined stop. Maintenance free shut-off cock activated by lever system (e.g. FRIALEN BS). Registered by DVGW for gas under registration nos. DG-8631AU2251, DG-8631AU2252.


.

d Order Ref. Stock-status BX PU di H L SW1 SW2

Weightkg/each

32 616176 1 1 100 25 153 324 50 x 50 19 0,65040 616177 1 1 100 31 153 324 50 x 50 19 0,78050 616178j 1 1 50 37 193 404 50 x 50 25 2,22063 616179 1 1 50 50 206 412 50 x 50 25 2,41590 616180 1 1 18 71 291 576 50 x 50 25 4,700110 616181 1 1 18 87 291 576 50 x 50 25 5,100125 616182 1 1 18 99 291 576 50 x 50 25 5,400

j BS d 63 – d 225 required

ES 31/1244

FRIALEN Preisliste

ES 31/12 45

AKHP Tapping Ball Valves in HD-PE, 1/4 turn,for side tapping under pressure

Compact part in HD-PE. Factory made combination of FRIALEN-Saddle Moulding and FRIALEN-Ball Valve with spigot for space and cost saving ho-rizontal installation. Leakage and swarf free tapping up to 10 bar (gas) and 16 bar (water) using standard tapping equipment (we recommend Hütz & Baumgarten (www.huetz-baumgarten.de)). With exposed heating element for optimal heat transfer.Registered by DVGW under registration nos. DG-8631AU2252 and DG-8631AU2253.


.


Ø daH L SW1 SW2

Weightkg/each

110 63 615427 1 6 48 42 180 330 50 x 50 25 3,070110 90 615428 1 4 32 60 240 335 50 x 50 25 4,670125 90 615431 1 4 32 60 240 335 50 x 50 25 4,790160 63 615433 1 4 32 42 180 330 50 x 50 25 3,300160 90 615434 1 3 32 60 240 335 50 x 50 25 5,000180 90 615437 1 4 32 60 240 335 50 x 50 25 5,000225 63 615439 1 3 32 42 180 330 50 x 50 25 5,000225 90 615440 1 3 32 60 240 335 50 x 50 25 5,000

AKHP-TL Tapping Ball Valves in HD-PE, 1/4 turn, Top-Loadingfor side tapping under pressure

Suitable for all pipe diameters in the given range by means of the FRIA-LEN-FRIATOP Clamping Unit (see Product Range FRIATOOLS). Compact part in HD-PE. Factory made combination of FRIALEN-Saddle Moulding and FRIALEN-Ball Valve with spigot for space and cost saving horizontal instal-lation. Leakage and swarf free tapping up to 10 bar (gas) and 16 bar (water) using standard tapping equipment (we recommend Hütz & Baumgarten (www.huetz-baumgarten.de)). With exposed heating element for optimal heat trans-fer. Dimension range d 250 - d 560 fusible as standard using the top-loading method. Please note the maximum permissible wall thickness for tapping.If required, please contact the manufacturer of the tapping equipment. Registe-red by DVGW under registration nos. DG-8631AU2251 and DG8631AU2252.


.


Ø daH L SW1 SW2

Weightkg/each

250-450 (560) 63 615525j 2 4 32 42 180 330 50 x 50 25 2,770250-450 (560) 90 615526j 2 4 32 60 240 335 50 x 50 25 4,470

j d1: d 250 up to d 450 for pipes SDR 11 and 17;d1: > d 450 up to d 560 for pipes SDR 17

FRIALEN Preisliste

BS Installation kits for Ball Valves and Tapping Ball Valves (Standard and Top-Loading)

Telescopic actuating linkage for operation of the FRIALEN-KHP, KH, AKHP and AKHP-TL from the valve cover. Stepless adjustment in the stated range (RD) without the use of tools, even in the installed state. Self supporting in any extended position. Corrosion proof. Wrench size 14 specially designed for domestic connection.

.

d RD in m Order Ref. Stock-status BX PU SW1

Weightkg/each

32– 50 0,45-0,70 615741 1 1 42 30 1,80032– 50 0,60-1,00 615957 1 1 42 14 2,00032– 50 0,60-1,00 615328 1 1 42 30 2,70032– 50 1,00-1,50 615330 1 1 42 30 3,40032- 50 1,20-2,00 616068 2 1 42 14 3,45032– 50 1,20-2,00 615329 2 1 42 30 3,65063–225 0,70-1,00 615958 1 1 42 14 2,05063–225 0,70-1,00 615310 1 1 42 30 3,05063–225 1,00-1,50 615331 1 1 42 30 4,15063-225 1,20-2,00 616069 2 1 42 14 3,60063-225 1,20-2,00 615311 2 1 42 30 5,250

ES 31/1246

ES 31/12 47

General conditions of supply and payment of FRIATEC Aktiengesellschaft Technical Plastics Division

1. Scope Terms and conditions as listed below apply to all deliveries. Other conditions do not automatically

become contractual, even if not expressly contradicted by us.

2. Conclusion of a Contract Ourquotationsarenotbinding.Acontractismadeonlywhenweconfirmanorderinwriting.

Ourwrittenorderconfirmationcontrolscontentandsizeoftheorder.

Alterations to the technical execution of ordered goods are acceptable unless they constitute essen-tial functional changes or the customer proves that the alterations are unacceptable. We will accept liabilityforthequalityofanitemonlyifthishasbeenexpresslystatedinourorderconfirmationorinour advertisements.

3. Delivery

Delivery dates and deadlines are subject to ourselves being supplied appropriately and in good time.Deliverydeadlinesaredeterminedbythedateofourorderconfirmation.Theyareregardedasfulfilledoncethegoodshaveleftthefactoryorbeenreleasedforshipment.Thedeadlineisextendedif the customer desires changes retrospectively or if events occur for which we are not responsible.

4. Prices and Payment Conditions

Our prices are ex factory or ex warehouse, plus VAT. Insurance, packaging, shipment and custom-clearance charges are invoiced separately, unless expressly stated otherwise in our current pricelist.

Our invoices are payable net within 30 days from the invoice date. We offer 2% discount for pay-ments within 14 days, but only if all other outstanding invoices have been paid.

We reserve the right to accept bills of exchange and cheques in individual cases. No discount is of-fered when paying by bill of exchange. Bills of exchange and cheques are accepted only on account ofperformance.Theclaimisregardedasfulfilledonlyoncepaymenthasbeencashedorcredited.All expenses which may arise must be met by the customer.

We are authorised to demand immediate cash payment for all deliveries, if payment conditions are not adhered to, or in circumstances causing the credit worthiness of a customer to be questioned. A possible deferral caused by the acceptance of bills of exchange becomes null and void. The cu-stomer is obliged to pay cash immediately on returning the bill of exchange. In addition we are authorised to carry out any remaining deliveries against advance or warranty payment or to rescind the contract and demand compensation. We are furthermore authorised to stop the onward sale of goods to be delivered and to retrieve the goods at the customer‘s expense if we have rescinded the contract.

5. Passage of Risk

The risk is transferred to the customer at the moment of the goods being ready for shipment and the notificationthereof.Thisappliesevenifshipmentisdelayedduetocircumstancesnotinourcontrol.Ifthereisnonotificationofreadinessforshipment,theriskispassedtothetransportcompany,andon to the customer no later than at the point of the goods leaving the factory or warehouse. This applies also if our own transport is used or carriage is paid.

6. Formal Complaints, Claims, Limitation Period

The customer must immediately check goods received for any defects. Formal complaints must be lodged immediately on receipt of the goods, and no later than a fortnight after receipt, in writing. The same timeframe applies to hidden defects after discovery.

Therecanbenoclaimsfordefectswhichhavenotbeennotifiedwithintheappropriateperiod.Whenaclaimisjustified,wewillchooseeithertorepairorreplacethegoods.Ifwedonotrectifythedefector provide a substitute within an appropriate period, or following no more than two attempts, the customer is authorised to rescind the contract or demand a reduction in the purchasing price. It is notpossibletorescindifthereisonlyaninsignificantviolationonourpari.

The limitation period for claims is

5 years for building materials which have been installed and have caused defects within a pipe system.

1 year for delivery of other new goods to contractor

2 years for all others

Limitation period starts on delivery of goods.

7. Reservation of Ownership

Our deliveries are all subject to reservation of ownership. The goods remain in our ownership until payment of all claims arising from our business relationship with the customer is made. With an ac-count current the reserved ownership constitutes the security for our balance claim. The customer is authorised to resell delivered goods within the framework of his or her ordinary business procedures. He or she may not however pledge or transfer the conditional commodity by way of security.

In the event of resale the customer assigns to us all claims including all subsidiary rights which arise from the resale. This applies without taking into consideration whether he or she resells the conditional commodity unaltered, unprocessed, or in conjunction with other items. If the resale takes place including goods not owned by us, the assigning applies only up to the value of the conditional commodity. The value is determined according to our sales prices.

Processing of the conditional commodity always occurs according to § 950 BGB for us as manuf-acturers, but without obligation. The processed goods constitute the conditional commodity as part of these conditions. If the conditional commodity is processed together or is irretrievably mixed up with other items not owned by us, we will gain co-ownership of the new item at a ratio of conditional commodity invoice value to the invoice value of other used goods at the time of processing and mixing. The co-ownership rights thus created apply as conditional commodity in the context of these conditions. The customer is obliged, if requested by us, to point out our ownership rights to the pro-spective buyer.

The customer is authorised to collect the claim from the resale notwithstanding our own collection authorisation. While the customer meets his payment obligations appropriately, we will not put the claim into force. The customer has to inform us of the debtors of the assigned claims and to notify the assignment to them. Our right of informing third-party debtors of the assignment will not be affected by this.

The customer is not allowed to assign the claim against third-party debtors to third parties or to negotiate an assignment ban with the third-party debtor.

The customer is obliged to notify us immediately and in the quickest way possible about a pledge or any other infringement of our security rights by third parties. The customer is obliged to hand over to us all documents required to preserve our rights, and to compensate us for any costs arising from a possible Intervention.

We pledge to release existing securities of our choice up to the point where their value exceeds the claims to besecured by more than 25%.

The customer is obliged to insure the goods for the duration of our reservation of ownership.

8. Acts of God - Right to Rescind

If we are prevented from fulfilling our terms of delivery by acts of God or other circumstancesnotwithinourcontrol,orifthefulfilmentofourobligationsbecomestoogreataburdenforthesereasons, we are authorised to rescind the contract. Compensation claims by the customer in such circumstances are not permitted. The right to rescind is effective also if the delivery period was initially extended.

9. Limitations of Liability

We are liable for any violations of life, body or health for which we are accountable in accordance with legal requirements.

For other damages the following applies:

We are liable for damages based on gross negligence by us or deliberate or gross negligence by our legal representatives or assistants in accordance with legal requirements.

For damages based on the violation of essential contractual obligations based on negligence by us, our legal representatives or assistants, our liability is limited to the predictable contractual damage up to a maximum of the value of the delivered item.

Claims for other damage on violating subsidiary obligations or inessential obligations based on ne-gligence are excluded.

Claims for damages for delay caused by negligence are excluded. The customer‘s legal rights on completion of an appropriate period of time remain unaffected.

Liability exclusions or limitations do not apply if a defect has been deliberately concealed by us or if we have offered warranty on the quality of the item.

A customer‘s claim for compensation of time or costs invested in vain instead of compensation in place of time or costs, and the liability according to the product liability law remain unaffected.

10. Non-assignment clause

Unless something different has been expressly agreed with the customer, the customer is not aut-horised to transfer rights from the contract to third parties without our agreement.

11. Applicable rights, Place of Jurisdiction

Only German law applies under the exclusion of UN purchasing rights. Exclusive place of jurisdiction for disagreements between contract parties is Mannheim, if the customer is a merchant, a legal person of public law or a special asset, or if the customer does not have a place of jurisdiction in Germany. We do however reserve the right to proceed against a customer who does not have a general place of jurisdiction in Germany within other courts of our choice.

January 2006FRIATEC Aktiengesellschaft Technical Plastics Division POB 71 02 61 D-68222 Mannheim Telephone +49 (0) 621-4 86-0 Telefax +49 (0) 621-47 91 96

FRIATEC Aktiengesellschaft · Technical Plastics DivisionP.O.B. 710261 · 68222 Mannheim, Germany Tel.: +49 621 486 1431 · Fax +49 621 479-196

[email protected] · www.frialen.com

FURTHER PRODUCT RANGES:

Date post:	22-Mar-2018
Category:	Documents
Upload:	dangcong
View:	237 times
Download:	1 times

FRIALEN - · PDF fileEN 1555-2, EN 12201-2, EN 13244-2, ... FRIALEN ®, FRIALOC,...

Documents