“Design and Development of Wind Powered Water lifting Pump

Mechanism –A Practical Approach for Rural Development”

The Project Report Submitted for thePartial Fulfillment of Award of the Degree

Bachelor of Mechanical Engineering

By

PAWAR AJINKYA RAMAKANT

BORUDE PRAVIN BABAN

KULKARNI NEETA VILASRAO

KAMBLE SUPRIYA RAJESH

In the Supervision of

DR. S. V. KARMARE

Department of Mechanical EngineeringGOVERNMENT COLLEGE OF ENGINEERING AND RESEARCH, AWASARI,

PUNE – 412 405Maharashtra, India

2013-14

CERTIFICATE

This is to certify that the seminar entitled “Design and Development of Wind Powered Water lifting Pump Mechanism –A Practical Approach for Rural Development”, submitted by

PAWAR AJINKYA RAMAKANT

BORUDE PRAVIN BABAN

KULKARNI NEETA VILASRAO

KAMBLE SUPRIYA RAJESH

is the bonafied work completed under my supervision and guidance in partial fulfillment for the project of final year in Bachelor of Mechanical Engineering at Government College of Engineering and Research, Awasari(kd), Pune for University of Pune (M. S.).

Place: Awasari(kd), Pune

Date: 24/03/2014

Dr. S. V. Karmare

GuideGovernment College of Engineering,

and Research, Awasari, Pune

Dr. S. V. KarmareHead, Mechanical Engineering,

Government College of Engineering, and Research, Awasari, Pune

Prof. S. V. JoshiPrincipal

Government College of Engineering,and Research, Awasari

ACKNOWLEDGEMENT

“Completing a task is never a one man’s effort. Several prominent people in

production, academics, and administrative field have helped in the present work. Their

collective support has led in presentation of this report. To name them all is impossible.”

I am thankful to colleagues, at, Government College of Engineering, Awasari,

Pune, and various other institutions for cooperation provided by them. Special thanks to

the Principal and teaching staff of GCOEAR, Awasari, for needful support and

encouragement throughout the last four years of study.

I am indebted to the Hon. Principal, Prof. S. V. Joshi, for causal achievement to

the wellbeing of students of the institute beyond expectations.

It is immense pleasure to me in expressing sincere and deep appreciation towards

Dr. S. V. Karmare as being our guide and Head of Department for their priceless

execution of steering this contribution all the way through this work with soft

suggestions, embedded supervision and invariable advocacy. Also immenseful thanks to,

Prof. S. R. Kewate, and for giving us valuable guidance at various conditions.

PAWAR AJINKYA RAMAKANT

BORUDE PRAVIN BABAN

KULKARNI NEETA VILASRAO

KAMBLE SUPRIYA RAJESH

Mechanical Engineering

CONTENTSSr. Illustration Page No.i List of figuresii List of tablesiii Abstract1 Introduction

1.1 Need of wind pump1.2 Types of wind mill

a) Horizontal axisb) Vertical axis

1.3 Comparison between HAWM and VAWM1.4 Site selection1.5 Application of wind mill1.6 Summary1.7 Problem definition1.8 Objectives1.9 History

1 1 2 2 3 4 5 5 6 6 7 7 8 8

2 Literature Review2.1 Basic water pumping theory

10

3 Principles 164 Construction and Working 175 System Development

5.1 System design5.2 Mechanical design5.3 List of component5.4 Design of part 5.4.1 Design of first central bearing 5.4.2 Design of second outer bearing 5.4.3 Friction losses 5.4.4 Design of Bolt 5.4.5 Design of reciprocating pump

23 23 23 24 25 26 27 27 27 28

6 Process and operation sheet 6.1 Process 6.2 Tools used

29

7 Cost Estimate 7.1 Cost of purchased parts 7.2 Machining cost 7.3 Miscellaneous costs

31

8 Advantages , Disadvantages , Application 329 Result and Conclusion 3610 Future scope 3711 References 38