28
FRO
NTI
ER
FRO
NTI
ER
FRO
NTI
ER
FRO
NTI
ER
FRO
NTI
ER
FRO
NTI
ER
FRO
NTI
ER
FRONTIERCERTIFICATION
INTERNATIONAL
www.fci-qatar.com | [email protected]
LOCAL THIRD-PARTY INSPECTION & CERTIFICATIONS
A key requirement of most Oil and Gas / Energy companies is that an independent Third-Party Inspection & Certification agency verify, certify, and validate procurement, engineering, and construction activities. This is ensured by the certification activities of FCI that cover every project stage. This includes General Construction Inspection, Product Inspection, Project Design Verification, Testing Services, Procurement Inspection, and QA/QC services. Additionally, all major engineering disciplines are covered by the company’s Third-Party Inspection services.
In addition to the above, expert welding services is provided by our welding engineers who assist in devising welding procedures of both simple and complicated materials. The welders are not only trained and certified to perform welding and welding inspections, but they are also qualified to meet the local and international standards for welding.
LIFTING EQUIPMENT INSPECTION, INCLUDING OPERATOR & RIGGER TRAINING & CERTIFICATION
Frontier Certification International is a full member of the Lifting Equipment Engineers Associa-tion (LEEA)-UK. The onshore and offshore services provided by FCI includes the monitoring, authorizing, testing, proof load testing, regular inspections, and recertification of lifting equip-ment. Frontier also provides training to riggers and operators of lifting equipment and performs plant operator assessments annually.
ADVANCE & CONVENTIONAL NON-DESTRUCTIVE TESTING (NDT)
Services offered by FCI include the following NDT techniques: 1. Alternate Current Field Measurement (ACFM), 2. Acoustic Emission Testing (AET), 3. Near Field Technique (NFT), 4. Time of Flight Diffraction (TOFD), 5. Phased Array (PA), 6. Tank Floor Scanning with Magnetic Flux Leakage (MFL), 7. Long Range Ultrasonic Testing (LRUT), 8. Eddy Current Array (ECA) and Tube Inspections including RFT- Remote Field Testing, IRIS-Internal Rotary Inspection System and Acoustic Eye, MFL- Magnetic Flux Leakage Testing, and ECT-Eddy Current Testing 9. Corrosion Mapping
In addition to the above, the following Conventional NDT services are also provided by FCI: 1. Ultrasonic Testing (UT) 2. Magnetic Particle Testing (MPT) 3. Radiographic Testing (RT) 4. Penetrant Testing (PT)
Frontier also offers Hardness Testing, Positive Material Identification (PMI), Visual Testing, Holiday Testing, and Post Weld Heat Treatment (PWHT).
AboutFrontier Certification InternationalWhen it comes to Asset Integrity and Quality Solutions, a well-known name in the industry is FCI, offering a suite of profes-sional services. These include Engineering Services, Project Verification and Certification, Supply of Highly-qualified Professional & Technical Personnel, Training, Quality Control and Certification, and Asset Integrity. A company with of one the largest inspection and certification scopes in the region, FCI offers both independent services and services fused in an interchangeable approach. This is to allow customers to customize solutions as per their requirements. FCI is accredit-ed for ISO 17020: 2012 by A2LA and for ISO 17021: 2015 by IAS. Additionally, FCI is a full member of the Lifting Equipment Engineers Association (LEEA).
Following are the summarized services offered by FCI:
LOCAL THIRD-PARTY INSPECTION & CERTIFICATIONS
A key requirement of most Oil and Gas / Energy companies is that an independent Third-Party Inspection & Certification agency verify, certify, and validate procurement, engineering, and construction activities. This is ensured by the certification activities of FCI that cover every project stage. This includes General Construction Inspection, Product Inspection, Project Design Verification, Testing Services, Procurement Inspection, and QA/QC services. Additionally, all major engineering disciplines are covered by the company’s Third-Party Inspection services.
In addition to the above, expert welding services is provided by our welding engineers who assist in devising welding procedures of both simple and complicated materials. The welders are not only trained and certified to perform welding and welding inspections, but they are also qualified to meet the local and international standards for welding.
LIFTING EQUIPMENT INSPECTION, INCLUDING OPERATOR & RIGGER TRAINING & CERTIFICATION
Frontier Certification International is a full member of the Lifting Equipment Engineers Associa-tion (LEEA)-UK. The onshore and offshore services provided by FCI includes the monitoring, Frontier Certification International is a full member of the Lifting Equipment Engineers Association (LEEA)-UK. The onshore and offshore services provided by FCI includes the monitoring, Frontier Certification International is a full member of the Lifting Equipment Engineers Associa
authorizing, testing, proof load testing, regular inspections, and recertification of lifting equip-ment. Frontier also provides training to riggers and operators of lifting equipment and performs plant operator assessments annually.
ADVANCE & CONVENTIONAL NON-DESTRUCTIVE TESTING (NDT)
Services offered by FCI include the following NDT techniques: 1. Alternate Current Field Measurement (ACFM),Services offered by FCI include the following NDT techniques: 1. Alternate Current Field Measurement (ACFM),Services offered by FCI include the following NDT techniques:
2. Acoustic Emission Testing (AET), 1. Alternate Current Field Measurement (ACFM), 2. Acoustic Emission Testing (AET), 1. Alternate Current Field Measurement (ACFM),
3. Near Field Technique (NFT), 2. Acoustic Emission Testing (AET), 3. Near Field Technique (NFT), 2. Acoustic Emission Testing (AET),
4. Time of Flight Diffraction (TOFD), 3. Near Field Technique (NFT), 4. Time of Flight Diffraction (TOFD), 3. Near Field Technique (NFT),
5. Phased Array (PA), 4. Time of Flight Diffraction (TOFD), 5. Phased Array (PA), 4. Time of Flight Diffraction (TOFD),
6. Tank Floor Scanning with Magnetic Flux Leakage (MFL), 5. Phased Array (PA), 6. Tank Floor Scanning with Magnetic Flux Leakage (MFL), 5. Phased Array (PA),
7. Long Range Ultrasonic Testing (LRUT), 6. Tank Floor Scanning with Magnetic Flux Leakage (MFL), 7. Long Range Ultrasonic Testing (LRUT), 6. Tank Floor Scanning with Magnetic Flux Leakage (MFL),
8. Eddy Current Array (ECA) and Tube Inspections including RFT- Remote Field Testing, 7. Long Range Ultrasonic Testing (LRUT), 8. Eddy Current Array (ECA) and Tube Inspections including RFT- Remote Field Testing, 7. Long Range Ultrasonic Testing (LRUT),
IRIS-Internal Rotary Inspection System and Acoustic Eye, MFL- Magnetic Flux Leakage Testing, and ECT-Eddy Current Testing 9. Corrosion Mapping
In addition to the above, the following Conventional NDT services are also provided by FCI: 1. Ultrasonic Testing (UT)In addition to the above, the following Conventional NDT services are also provided by FCI: 1. Ultrasonic Testing (UT)In addition to the above, the following Conventional NDT services are also provided by FCI:
2. Magnetic Particle Testing (MPT) 1. Ultrasonic Testing (UT) 2. Magnetic Particle Testing (MPT) 1. Ultrasonic Testing (UT)
3. Radiographic Testing (RT) 2. Magnetic Particle Testing (MPT) 3. Radiographic Testing (RT) 2. Magnetic Particle Testing (MPT)
4. Penetrant Testing (PT) 3. Radiographic Testing (RT) 4. Penetrant Testing (PT) 3. Radiographic Testing (RT)
Frontier also offers Hardness Testing, Positive Material Identification (PMI), Visual Testing, Holiday Testing, and Post Weld Heat Treatment (PWHT).Frontier also offers Hardness Testing, Positive Material Identification (PMI), Visual Testing, Holiday Testing, and Post Weld Heat Treatment (PWHT).Frontier also offers Hardness Testing, Positive Material Identification (PMI), Visual Testing,
AboutFrontier Certification InternationalWhen it comes to Asset Integrity and Quality Solutions, a well-known name in the industry is FCI, offering a suite of profes-sional services. These include Engineering Services, Project Verification and Certification, Supply of Highly-qualified Professional & Technical Personnel, Training, Quality Control and Certification, and Asset Integrity. A company with of one the largest inspection and certification scopes in the region, FCI offers both independent services and services fused in an interchangeable approach. This is to allow customers to customize solutions as per their requirements. FCI is accredit-ed for ISO 17020: 2012 by A2LA and for ISO 17021: 2015 by IAS. Additionally, FCI is a full member of the Lifting Equipment Engineers Association (LEEA).ed for ISO 17020: 2012 by A2LA and for ISO 17021: 2015 by IAS. Additionally, FCI is a full member of the Lifting Equipment Engineers Association (LEEA).ed for ISO 17020: 2012 by A2LA and for ISO 17021: 2015 by IAS. Additionally, FCI is a full member of the Lifting Equipment
Following are the summarized services offered by FCI:
MANAGEMENT SYSTEMS CERTIFICATION, AUDITS & TRAINING
The Management Systems Certification services of FCI involve independent and unbiased Third-Party Certification of Management Systems as per the following International Standards, ISO 27001, ISO 9001, ISO 22000, ISO 29001, ISO 50001, ISO 45001, ISO 14001. Additionally, the scope of FCI’s services includes pre-assessment audits, second-party audits, and project audits. Frontier also offers Internal and Lead Auditor training for the above-mentioned standards.
VENDOR SURVEILLANCE
No project purchasing activities are complete without Vendor Inspection, Quality Control, and Expediting. With this in mind, FCI provides a whole range of services involving engineering inspection at the vendor’s works. From pre-shipment inspection for a letter of credit purposes to stage inspections in accordance with the Quality Control Plan, the scope of the inspection can vary. Spread across the globe, the vendor expediting services of FCI allow clients to minimize delays in equipment and materials delivery. This ensures that that projects stay on schedule. Frontier also assists clients in the assessment and selection of vendors by providing vendor assessment and technical capability audits. Our clients can rest assured that the equipment they buy will be delivered on time and as specified. This applies to both new construction and on-going maintenance.
SUPPLY OF SPECIALIST PERSONNEL
We can meet the workforce requirements of our clients by providing them with a capable and high-flexible workforce that can quickly and efficiently meet the needs of their projects. Our special personnel services can provide support in Commissioning, Engineering, QA/QC, Cons-truction, NDT And HSE for various industries. In addition to the above, FCI offers technical personnel who can support shutdown activities of refineries, process plants, offshore platfor-ms, and gas plants. These personnel include all-discipline engineers, Planning Engineering & Technicians, Supervisors, NDT Specialists, Interface Coordinators, and API certified Inspector-s/Engineers.
FITNESS FOR SERVICES (FFS)
FCI can evaluate pressure equipment to check them for a wide variety of flaws. The pressu-re equipment evaluated by FCI includes storage tanks, boilers, heat exchangers, piping, pressure vessels, etc. By assessing your plant, we can improve its reliability, thus saving you time and money.
ELECTRICAL TESTING
No matter what the electrical installation, FCI can provide the best optimization for it during its utilization period. The services offered by FCI for this purpose include Inspection and Maintenan-ce Plans and Root Cause Failure Analysis through the various types of testing techniques the company performs. FCI can help to avoid failures of electrical equipment and unnecessary repair/corrective actions by testing the equipment. The electrical equipment that FCI can perform testing for includes Generators and cables, Motors, Relays-Protection systems, Circuit Breakers, Power Transformers, and Substations.
PROJECT QUALITY MANAGEMENT
The following Total Project Management activities can be handled by FCI: • Provision of Specialist Personnel • Management of QA/QC & HSE Systems • QMS/HSE AuditingWe can provide a Total Solution by combining our Quality Assurance & Quality Control Servi-ces. This includes supervision of the nominated EPC or Execution/Construction Contractor work during project phases such as Procurement, Engineering Design, and Construction.
LIFT
ING
EQ
UIPM
ENT
CERT
IFIC
ATIO
N &
TRA
ININ
G
Lifting EquipmentCertification & Training
Certification Services
When it comes to Inspection and Certification of lifting equipment inspection for Legislative or Health and Safety reasons, FCI is one of the few companies fully accredited by A2LA.
Inspection of Lifting Equipments • Inspection of All types of Crane including Mobile Cranes, EOT Cranes, Gantry Cranes, Tower Cranes, Hoists, Monorail Beams & Lorry Loader Cranes • Inspection of Erected Equipment including Mast Climbers, Passenger Hoist, Material Hoist, Cradles, BMU & Elevating Platforms • Inspection of Earthmovers including Excavators, Wheel Loaders, Dozers, Graders, etc.… • Inspection of Lifting Equipment including Forklifts, Manlifts, Elevators, Jacks, • Inspection of all type of Lifting Gears like Slings, Shackle, Lifting Beams, Man-Basket, etc.
Certification / Qualifying the Person • Operator assessment of the Lifting Equipment like Cranes, Forklifts, Manlifts, Elevators, Hoist & Elevators • Operator Assessment of the Earthmoving Equipment like Excavators, Loaders, Dozers, Graders, etc.…
Load Testing • Load Testing of the Special Equipment like Platforms, Escalators, Bars, Hoist System, Jack System
Written Scheme of Examination • Inspection of the Lifting items as per Special requirements of Client such as Critical circumstances like Sewage Plant, Cements Plant & Steel Plants Crane Inspection.
Periodic Inspection & Re-Certification • Inspection & re-certification of Crane as per Standards duration of Inspection & Re-certification of Lifting Equipment as per mentioned time complying with LOLER
Manufacturing Certification & Inspection • Inspection of Lifting gears & Equipment at the Manufacturer’s Premises, ( Local Manufacturer of Slings , Beams & other Lifting Items )
Full equipment assessments can be performed by FCI. On completion of the assessment, an electronic manage-ment control system tracks and monitors each item for its inspection status prior to the implementation of the certifi-cation. Generally, this is done with the help of an electronic tagging system that can be customized according to the need of the client.
Additionally, a color-coded tagging system can be implemented by FCI. This tagging system is changed on a periodic basis according to the inspection regime. The purpose of this is to make it easy to identify and place the equipment with out-of-date inspection and certification into quarantine until the completion of the inspection and certification.
Since FCI is a full member of the Lifting Equipment Engineers Association (LEEA), it ensures the provision of high-lev-el quality inspection service. Additionally, all surveyors of FCI are LEEA engineers.
LIFT
ING
EQ
UIPM
ENT
CERT
IFIC
ATIO
N &
TRA
ININ
G
Inspections performed by FCI are done in accordance with the local country statutory regulations, as well as the international regulations such as The Lifting Operations and Lifting Equipment Regulations (LOLER) in the UK. Generally, all premises and work situations that are subject to local Health & Safety Laws need to comply with these regulations.
These regulations are primarily in place for lifting equipment such as lifts, cranes, and hoists. However, they may also cover other equipment such as hooks, chains, eye bolts, shackles, slings, and wire ropes.
We advise you on the inspection requirements after reviewing your equipment specifications. If you don’t need to comply with any local legislation, then we can help you assess the equipment inspection requirements which include periodicity. We can assist you by using best practice and international codes and standards.
Training Courses
The following courses are provided by FCI both onshore and offshore:
• Manlift Operator Training • Forklift Operator Training • Mobile Crane Operator Training • Tower Crane operator Training • Hoist / Elevator / Cradle / BMU Operator Training • EOT/ Gantry Crane Operator Training • Basic Rigging & Slinging Training • Boom-Truck Operator Training
Our courses include theoretical as well as practical training. The former is provided using PPTs, OHP and safety videos inside the classrooms while practical training is provisioned within the client’s working environment. This allows the instructor to identify any specific safety hazards that pertain to operations while emphasizing the appropriate safe operations.
At each course’s completion, all participants achieve high skill levels that enable them to perform their respective duties to an extremely high level of safety. Additionally, FCI can provide auditing and monitoring on operator skills on a periodic basis as well as feedback to the higher management if needed.
MA
NAG
EMEN
T SY
STEM
S
Management Systems Certification, Audit & Training
Standardization is the new benchmarking criteria for organizations across the globe, and the best way to achieve Organizational Business Standardization is by opting for ISO Management System Certification. This has become very important nowadays, particularly because of competitive market dynamics and constant service refinement from the customer.
These MS Certifications are recognized worldwide with customers, suppliers, regulators and other interested parties. So, Top Management utilize these systems to help an organization fulfill all tasks needed to achieve its objectives. A management system is the framework of processes and procedures. It helps meet the needs and expectations of customers by prescribing systematic control of activities. The system is designed and intended to apply to virtually any process for Quality, Environment, Health and Safety or Food Safety Services anywhere in the world.
Management System Certification Services
In accordance with the ISO 17021 and international guidelines for certification body accreditation, FCI is accredit-ed by International Accreditation Services (USA). This accreditation shows the confidence of IAS in FCI’s management system and that it complies with international accreditation requirements.
The audit process of FCI ensures the compliance of the applicant organization with the requirements of the relevant system standards. This is achieved through the review of the manuals and procedures and on-site audits of the applicant organization. This process is completed in two stages and in accordance with the requirements of ISO 17021.
A Certificate of Compliance is issued on completion of a successful audit. Additionally, a register of Certified Companies is maintained which can be accessed through the FCI website upon request. Typically conducted once a year, surveillance audits are performed by FCI to keep the system effective on a continual basis.
Experienced approved auditors are used by FCI in relevant industry sectors. This allows the audit process to produce meaningful results and improvements to the business process. FCI has a track record for excellent customer satisfaction for its Certification service.
QUALITY MANAGEMENT SYSTEMS - ISO 9001:2015
The different internal processes within the organization are integrated by a Quality Management System (QMS), with the aim to provide a process approach. With a process-based QMS, organizations can identify, measure, control, and improve the various core business processes that will eventually result in improved business performed and customer service that exceeds expectations.
ENVIRONMENTAL MANAGEMENT SYSTEMS - ISO 14001:2015
A management tool used to evaluate an organization’s activities, an Environ-mental Management System (EMS) can help to identify the environmental impacts that relate to those activities and the management of resources to minimize them. Additionally, an organi-zation can comply with and maintain its compliance with environmental requirements with the help of EMS.
FOOD SAFETY MANAGEMENT SYSTEMS - ISO 22000:2018
An international standard, the ISO 22000 specifies the requirements for a food safety management system that involves pre-requisite programs and HACCP principles for managing Food Safety risks.
OHSAS OCCUPATION HEALTH AND SAFETY SYSTEMS – ISO 45001:2018
A management system standard, ISO 45001:2018 addresses health and safety in the management of risk to minimize accidents and comply with regulations.
INTEGRATED MANAGEMENT SYSTEM
Integrated management aims to create a single management system which integrates multiple management system standards such as ISO 45001, ISO 22000, ISO 14001 and ISO 9001. Performed by qualified auditors, combined assessment in multiple management systems helps to significantly reduce the time and costs for audits. These benefits get passed onto the client.
MA
NAG
EMEN
T SY
STEM
S
Management System Training Services
Careers are build by enhancing skills. Trainings’ are the best ways to sharpen your skills. At Frontier Certification Interna-tional, we offer the best trainings in the field of Quality, Environmental, Safety, Food Safety, Risk Management, Business Continuity, Lean Management, etc. We also provide CQI IRCA accredited auditing courses for professionals to boost their employment prospects.
We conduct open house / public training courses and client based in-house programs. Some of the courses we conduct on an ongoing basis are:
ISO 9001:2015The Lead / Auditor course covers the general understanding of the concepts of process approach to ISO 9001:2015 Quality Management Systems and auditing in accordance with ISO 19011 and the eight quality management princi-ples. Our Expert trainers explain the clauses of ISO 9001:2015 in detail and guide the participants through the entire audit process, from managing an audit program to reporting on audit results.This course comprises of a 2-hour written examination for evaluation.This course is for those intending to acquire the competence to audit an organization’s ISO 9001-based management system.
ISO 14001:2015The Lead / Auditor course covers the general understanding of the Environmental Management Systems approach to managing environmental aspects and their impacts and the requirements of ISO 14001. It also teaches the entire audit process starting from planning, to reporting and verifying corrective actions of EMS. This course comprises of a 2-hour written examination for evaluation.This course is for those intending to acquire the competence to audit an organization’s ISO 14001-based management system
ISO 45001:2018The Lead / Auditor course covers the general understanding to participants on Occupational Health Safety Manage-ment System and to acquire the competence to conduct audit based on the requirements of ISO 45001.This course comprises of a 2-hour written examination for evaluation.This course is designed for delegates who have prior knowledge of occupational health and safety management princi-ples and concepts, and the requirements of ISO 45001.
ISO 22000:2018The Lead / Auditor course covers the general understanding to delegates with the knowledge and skills required to perform audits of Food Safety Management Systems against ISO 22000, in accordance with ISO 19011, ISO 22003 and ISO 17021, as applicable.This course comprises of a 2-hour written examination for evaluation.This course is for those intending to acquire the competence to audit an organization’s ISO 22000 based management system
• Lead Auditor Trainings – IRCA Approved (ISO 9001:2015, ISO 14001:2015, ISO 22000:2018, ISO 45001:2018)• Implementor Trainings (ISO 9001:2015, ISO 14001:2015, ISO 22000:2018, ISO 45001:2018)• Internal Auditor Trainings (ISO 9001:2015, ISO 14001:2015, ISO 22000:2018, ISO 45001:2018)• Enterprise Risk Management Training (ISO 31000:2018)• Business Continuity Management Training (ISO 22301:2019)• Asset Management System Training (ISO 55001:2014)• Facility Management System Training (ISO 41001:2018)• Project Management System Documentation Training (PQP, CEMP, ASPECT-IMPACT, HIRA, HAZID, HAZOP, etc.)• Quality Assurance Training (7 QC Tools (Cause-and-effect diagram; Check sheet; Control Chart, Histrogram, Pareto Chart, Scatter Diagram, Stratification)• Process Implemention Training• Customer complaint handling training• ISO 17020, ISO 17021 and ISO 17025 Awareness and Internal Auditor Courses• Lean Management Training• Lean Six Sigma Yellow Belt/ Green Belt / Black Belt
FCI’s Proficiency
Experienced personnel who are experts in their respective industries are part of the FCI’s Auditors knowledge base. These experts help clients with value adds during the management systems Audit Process. An invaluable quality, the practical experience of the experts helps clients to understand the practical problems in documentation and imple-mentation.
Additionally, the experts can advise individual organizations on a case by case basis. However, the audits are performed by independent auditors of FCI, making the Certification process impartial.
SPEC
IALI
ZED
NO
N-D
ESTR
UCTI
VE T
ESTI
NG
Specialized Non-Destructive Testing
Integral to our range of services, FCI offers Specialized Non-Destructive Testing (NDT) and inspection to comple-ment our other traditional Quality Assurance and Quality Control Services. These services help our clients to improve plant reliability, reduce operational and maintenance costs, enhance safety, extend plant life and meet regulatory requirements.
We believe our personnel are our greatest assets. Besides state of the art equipment for best results, we have highly trained and certified inspectors to perform your inspection. Our inspectors are experienced and have techni-cal expertise to conduct the inspection surveys in accordance with the international standards. Our reputation within all industries is not only known for our quality of personnel and equipment but equally our professionalism and knowledge.
FCI's comprehensive range of inspection techniques ensures that we remain at the forefront of Specialized Non-Destructive Testing. Our services include:
Advanced UT (manual and automated)
Corrosion Mapping
Ultrasonic imaging of complex geometries, pipes, plates and curved surface for remaining wall thickness measurement with different sectional viewing; side, plan and end view.
Time of Flight Diffraction (TOFD)
An ultrasonic technique that can be used to examine high wall thickness welds in pressure vessels and pipes.
A & B Scan Enhancement Imaging (ABI Scan)
ABI scan imaging technique provides inspection of welds located in difficult access areas and complicated geometries. Graphical records are kept for hard copy evidence and post processing.
Automated Ultrasonic Testing / Corrosion mapping System:
Mechanized scanners that are computer controlled to move transduc-ers over the surface of the material being inspected. As the transducer moves, the computerized system acquires ultrasonic inspection data on a predefined grid, often acquiring data from a number of different transducers at one time. The data is then displayed within the computer-ized interface, allowing the operator to manipulate it to provide the data displays that show the areas of interest within the inspection volume. AUT system can utilize ultrasonic transducer or technique that is in operation, examples of which are conventional ultrasonic transducers, TOFD, phased array transducers, or any combination of these. AUT inspection can be used for inspection of newly fabricated welds in lieu of radiography, and also for in-service inspection to detect and trend flaws.
SPEC
IALI
ZED
NO
N-D
ESTR
UCTI
VE T
ESTI
NG
Phased Array:
Ultrasonic phased array systems can potentially be employed in almost any test where conventional ultrasonic flaw detectors have traditionally been used. Weld inspection and crack detection are the most important applications. Phased array produces accurate, detailed cross-sectional pictures of internal structures at fast inspection speeds. The benefits of phased array technology over conventional UT come from its ability to use multiple elements and electronic time delays to create beams that can be steered, scanned, swept, and focused electronically for fast inspection, full data storage, and multiple angle inspections.
Tube Inspection Services:
There is no single non-destructive testing (NDT) technique that can be applied to inspect all of the tube materials. Selection of an NDT technique depends on the tube material and on defect types expected.
The Tube Inspection techniques we offer for inspection include Eddy Current Testing (ECT), Remote Field Testing (RFT), ultrasonic IRIS and Magnetic Flux Leakage (MFL) as well as laser optics. Each of the NDT techniques has its advantages and limitations. For example, conventional eddy current is very sensitive to pits and cracks, but it is mostly limited to non-ferromagnetic materials. IRIS is accurate in measuring wall thickness, but it will miss small defects such as pinholes and cracks. Optical techniques are limited to 10 defects. Proper selection of the NDT techniques is therefore a key to inspection of heat exchangers.
Electro Magnetic Acoustic Testing (EMAT):
The big advantage of EMAT testing is the ability to produce accurate readings on scaled surfaces. This is because the probes induce ultrasound in the steel itself rather than by transmitting it via a coupling medium. Infect the probes will work at a small distance from the material surface. This allows the probe to function when the test surface is heavily corroded, has a large oxide scale build up or during high temperature operation. A major cost benefit of these probes is that expensive and time-consuming cleaning and surface preparation is no longer necessary.
Long Range UT Guided Wave Inspection:
Long-Range Guided Wave UT pipe screening system is used for testing long lengths of pipe to rapidly identify areas of internal/external corrosion and other defects. With minimal surface preparation and only removing a small section of insulation, the transducer collar placed around the pipe have a typical test range of up to 50 meters in each direction along the pipe.Guided wave technology is now widely accepted and used to inspect pipes in inaccessible areas such as road and river crossings, power plant tubing, risers, offshore topside pipework, jetty lines and refinery pipework.
Remote Visual Inspection Services (CCTV):
Visual Inspection with the use of hi-tech video camera systems, of confined spaces or hazardous locations where human entry is impractical, physically impossible or unsafe. Remote visual inspection has a lot of applications and is ideal for preventive maintenance checks.
Advanced Radiography Techniques:
Computed Radiography (CR):
CR uses an imaging plate (IP) to create the image, which contains critical and precise details far greater than film. The digital image can then be viewed and enhanced using software that has functions very similar to other conventional digital image-processing software, such as contrast, brightness, filtration and zoom CR is capable of measuring thickness and lengths of parts and defects accurately electronically.
Digital Radiography (DR):
DR – the application of radiography where the radiographic film is replaced by a sensor that provides an immediate digital image of the radiograph. However, DR is also some-times used as a more generic term which relates to the use of digital technology in radiography inspection. In such instances, it can refer to both the use of digital sensors and the scanning, ie digitization, of radiograph-ic film.
Real Time Radiography (RTR):
The RTR process begins by emitting radiation at the object to be tested. The rays then pass through the object. On the other side of the object, there is either a phosphor screen or a flat panel with microelectronic sensors. The rays hit that screen which then gives off light. It’s this light which creates a digital image of the part in real time, including the internals of the part.
3D L
ASE
R SC
AN
NIN
GSU
RVEY
TEC
HN
OLO
GY
3D Laser Scanning Survey Technology
3D Data Capture
FCI offers comprehensive 3D Laser Scanning services for the efficient, detailed, and accurate collection of 3D data.
3D Laser Scanning is a method of capturing a real-world environment or structure in three dimensions. Using this technology, we are able to capture the full external or internal detail of any structure, of any size. 3D Laser Scanning is a safe and cost-effective solution for capturing data in congested, detailed or hostile environments, or where direct access is not possible.
The resulting 3D information – a point cloud of millions of surveyed points – can then be used to create a number of different deliverables, across a variety of applications, in multiple industries.
Possible Applications
• Site Survey & Clash Detection • Building Measurement • Volume-metrics • Digital Scene Documentation • Heritage Sites • Floor Flatness Reports • Urban Planning • Development Approval • Tank Calibration
Deliverables
• Site Survey & Clash Detection • Building Measurement • Volume-metrics • Digital Scene Documentation • Heritage Sites • Floor Flatness Reports • Urban Planning • Development Approval • Tank Calibration
Benefits
• Real word status of any object • Fast & Effective • Detailed & Accurate – down to the millimeter! • Capturing of Complex Environments • Reduce Construction Risk & Costs – human error eliminated • Remote Surveying where Direct Access not possible
3D L
ASE
R SC
AN
NIN
GSU
RVEY
TEC
HN
OLO
GY
3D Modeling
FCI offers in-house 3D Modelling. Using 3D Modelling software, we can create a real-life model of any structure. The 3D Models we create can also be incorporated into our 3D Point Cloud models from laser scanning. Using 3D Model-ling Software for detailing we can detect clashes and verify exact measurements of a model against the as-built site.
Building Information Modelling (BIM)
Building Information Modelling (BIM) is the process of creating & manag-ing building data during the lifetime of a project. Our team at FCI can do this for you.
Using BIM, we can give you the insight and tools to plan, design, construct & manage your projects. It can act as a shared knowledge source for all stakeholders. An example of this? We can combine contrac-tor models, checking for constructability & clashes, to reduce construc-tion risk and costs.
A FCI team member will collaborate with your project team to ensure all levels of detail are accurately surveyed and modeled.
Use 3D Construction Modelling to Save Money and Improve Your Work
Any time you have an architectural project or renovation, you can use 3D construction modelling to assemble a clear plan of action. This potent technology replaces a tremendous amount of painstaking and potentially inaccurate manual work with a rapid and highly effective digital solution. Let 3D Holovision give you incomparable assistance during your next project.
What You Can Expect from FCI Regarding 3D Modelling in Construction
We’re committed to satisfying each of our clients. Not only do we believe in the quality of our work, but we also have several ways that we live out that commitment on each job:
1. Our team will help you both gather the data you need and help you process it into an understandable format. After all, even if you have the right information, it doesn’t do you any good if it’s not understandable to your team.
2. We use cutting-edge technology that generates the most accurate information possible. Our 3D modelling for construction companies is a genuine reproduction of the actual facilities, so you can use the precise information that we gather to complete your designs and construction work.
3. We put your work first and foremost as we complete the task. From the first time you contact us to the moment that you receive the 3D model and get the assistance you need to work with it, we’ll be there for you.
Deliverables • 3D Model • Shop Drawings • IFC Files • Animation • Hologram • Clash Detection
Benifits • Visualization • Communication • Planning • Risk Management & Project Control
Benifits • Collaboration & Visualization • Project Management from Start-Finish • Improved Communication • Risk Reduction • Project Control • Cost Savings
OH
S TR
AIN
ING
S
OHS Training
Module 1 – Introducing Managing SafelyKey Learning points: • Why is it important to manage safely? • What is your role in influencing managing safely?
Module 2 – Assessing RiskKey Learning points: • What is risk? • What is a risk assessment? • How are risk assessment carried out?
Module 3 – Controlling RiskKey Learning points: • How do you reduce risk? • How do you decide which risk control to use?
Module 4 – Understanding Responsibilities Key Learning points: • What does the law require you to do • How does the law work? • What are the key parts of a health & safety management system
Module 5 – Understanding Hazards Key Learning points: • What are the common hazards? • What can you do about common hazards?
Module 6 – Investigating Incidents Key Learning points: • Why investigate incidents • How do incidents happen? • How do you carry out an investigation?
Module 7 – Measuring Performance Key Learning points: • What’s performance measurement about? • How do you measure health and safety performance? • What is auditing?
IOSH Managing Safely
The market-leading health and safety course for line managers is tried, tested and trusted. Designed to provide all managers with the confidence and enthusiasm to apply knowl-edge to the workplace, this course is unlike any other.
OH
S TR
AIN
ING
S
IOSH Working Safely
This course is for anyone at any level, in any sector worldwide, who need a grounding in the essentials of safety and health. It gives everyone at work an understanding of why they must ‘work safely’.
Part 1 – Introducing Working SafelyKey Learning point: • Why is it important to work safely?
Part 2 – Defining Hazard and RiskKey Learning points: • What kind of things can cause you or others harm? • What is risk? • How risks can be controlled • How do you decide what to do about risks?
Part 3 – Identifying Common Hazard Key Learning points: • What are some common hazards? • What can you do about commons hazards?
Part 4 – Improving Safety Performance Key Learning points: • What are your organization’s responsibilities? • What are your responsibilities? • How is safety improved?
FITN
ESS
FOR
SERV
ICES
Fitness For Services (FFS)For Onshore & Offshore Installations
Pressure equipment is assessed using fitness-for-service evaluations to check them for a wide variety of flaws. The pressure equipment that can be evaluated includes storage tanks, boilers, heat exchangers, piping, pressure vessels, etc. Following are some common flaws for which FFS evaluations are performed:
• Fire Damage • Generalized Corrosion • Cracks • Dents • Localized Corrosion/ Corrosion under insulation • Bulging • Blisters and Laminations • Pitting Corrosion • Fire Damage
FCI's FFS Methodology:
The fitness-for-service (FFS) evaluations performed by FCI include evaluations on piping, storage tanks, boilers, heat exchangers, pressure vessels, and other specialized equipment. The purpose of these evaluations is to ensure the equipment’s structural integrity for the intended design parameters which typically include level-1, 2, and 3.
The evaluation is performed as per API-579-1 /IASME FFS-1 (fitness for service) and other standards, codes, and specifications that apply. The fixed equipment’s assessment helps to improve the reliability of the plant, saving time and money.
A Full Range of the FFS Experience
All types of damage that can take place in the petro-chemical and refining industries are evaluated by FCI. The evaluation is performed on a wide variety of the following:
• Heat exchangers • Pressure vessels • Storage tanks • Process piping • Heaters (casing, tubes, and stacks) • Transmission pipelines • Mechanical components of specialized equipment
FITN
ESS
FOR
SERV
ICES
Why to Choose FCI for FFS?
FCI is experienced in the assessment of the following damage mechanisms:
• Hot tap thermal analysis • Brittle fracture, including tank hydrotest exemption • Blast loading and other dynamic effects • General and locally corroded areas, including pitting • Mechanical vibration • Laminations and blisters, HIC and SOHIC damage • Wind-induced vibration of towers, stacks, and pipelines • Bulges and out-of-roundness • Modeling of weld residual stresses and incorporation into crack-like flaw assessment • Crack-like flaws, including stress corrosion and fatigue crack growth • Local PWHT of weld repairs • Dents, gouges, and dent-gouge combinations • Tank shell and edge settlement • Evaluation of hot spots • Ring joint flange cracking • Heater tube remaining life • Fatigue evaluation of welded joints • Evaluation of high-temperature equipment for creep and creep-fatigue damage • Thermal and mechanical fatigue • High-Temperature Hydrogen Attack (HTHA) • Fire damage
Focus on your profitability
Recognized Leader
Practical Experience
Sophisticated Servicing
Technical Excellence
PIPE
MIL
L SU
RVEI
LLA
NCE
A
ND
STEE
L M
ILL
INSP
ECTI
ON
AN
D ST
EEL
MIL
L IN
SPEC
TIO
NA
ND
STEE
L M
ILL
INSP
ECTI
ONPipe Mill Surveillance &
Steel Mill Inspection
The Mill Surveillance of FCI ensures that the pipe or steel needed by clients is available on time for their projects. More importantly, we ensure the pipe or steel complies with the required specification, code, or standard.
In addition to the above, our base of associate experts spread across the globe applies their extensive knowledge throughout the seamless and welded manufacturing process. Our services are not limited to steel production and line-pipe. These services include Oil Country Tubular Goods (OCTG) such as drill pipe and specialized casings as well.
From random surveillance to a full inspection team, FCI offers a full range of options to clients. The inspection team may include local personnel, expatriate personnel, or both to meet the requirements of the project. Addition-ally, the inspection process may include coating, load out inspection, inspection supervision, final bench inspec-tors, hydro-test inspection, etc.
While monitoring production, the personnel of FCI either use the mill’s own internal system or their own tracking and reporting documentation to verify the activities of that system. Defect rates and the actions taken for rejected items can be tracked in the system.
The following services offered worldwide are where the experience and knowledge of FCI are evident:
• Coating Inspection • Material Receiving Inspection • Thread Gauging (including specialist thread geometries) • Material Control Evaluation • Safety Inspection • Procedure Verification • Claim Evaluation and Inspection • Production Surveillance • Traceability Surveillance • Transportation Inspections and Evaluations (Truck, Rail &Vessel) • Laboratory Material Testing Surveillance • Identification Inspection • Non-Destructive Testing Surveillance (UT, MT, PT, RT, and VT) • Visual & Dimensional Inspection • Hydrostatic Testing Surveillance
PIPE
MIL
L SU
RVEI
LLA
NCE
PIPE
MIL
L SU
RVEI
LLA
NCE
A
ND
STEE
L M
ILL
INSP
ECTI
ON
Coating Surveillance
The Coating Surveillance of FCI ensures that the coating systems of our clients are applied as per the required standard, code, or specification. FCI is experienced in the inspection and application of several different types of industrial coatings and paint systems including:
• Epoxy coatings • Weight coatings such as tape coating, concrete, and bitumastic coating
The experience and knowledge of FCI are offered worldwide in the following coating services:
• Anode Inspection • Internal Lining Inspection • Laboratory Testing Surveillance • Weight/Concrete Coating Inspection • External Coatings Inspection
Steel Manufacturing
The Steel Manufacturing services of FCI provide clients with steel that complies with the latest specification, code, or standards. In the surveil-lance and inspection of slabs, coils, billets, and place manufacturing process, the experience of FCI is extensive. Additionally, the company is accredited to endorse the certificate in accordance with EN standards if you require an Independent Inspection Authority to verify the test results during production.
The experience and knowledge of FCI are offered worldwide in the following steel manufacturing services:
• Inventory Inspection & Control • Material Verification & Inspection • Coil & Plate Production Inspection
PIPE
MIL
L SU
RVEI
LLA
NCE
TAN
K IN
SPEC
TIO
N
AN
D CA
LIBR
ATIO
N
Tank Inspection and Calibration
FCI has a team of highly experienced engineers equipped with on-field technical expertise supported by comput-er-aided mathematical volume analysis which meets international standards. Having the edge with constant technological innovation and upgradation to solve intricate problems.
To meet both statutory and Client requirements, FCI provides the services on internal and external Tank calibra-tion by latest Electro Optical method in accordance with the current API MPMS and ISO 7507 Standards.
Technical Competence
Whether it is an inclined horizontal tank which volume increases exponentially, a tank with uneven bottom, dished ends, blades and heating coils inside, complicated bottom shell arrangement, a floating roof tank with liquid displacement, a pressurized Horton sphere or a horizontal bullet; we are always a step ahead of any critical assign-ment. Our engineering capability is evident through unique correlated physical, mathematical and error-free computer-aided volumetric solution Software.
Measurements include detailed assessments of wall verticality roundness and shape, along with roof & floor profiles. Tank calibrations are conducted to the exacting requirements of the appropriate international standards published by the International Standards Organisation (ISO) or by the American Petroleum Institute (API). Detailed volumetric tables are compiled for each tank and can be formatted according to the client’s requirements. Comprehensive tables can incorporate any standard units of measure for size, volume or both.
We provide both onshore and offshore services combining state of the art automated equipment, diagnostic expertise capabilities and our network of hands on expertise to provide bespoke solutions.
TAN
K IN
SPEC
TIO
N
AN
D CA
LIBR
ATIO
N
Our Tank Calibration and Strapping Chart Capabilities Include:
• Above and Underground Storage Tanks • Horizontal Tanks • Spherical Tanks • Cylindrical Tanks • Metered Calibration of Tank Bottoms • Metered Calibration of Floating Roof Zones • Ultrasonic Plate Thickness Determination • Bottom Zone Surveys
VEN
DOR
INSP
ECTI
ON
&EX
PEDI
TIN
G S
ERVI
CES
Vendor Inspection and Expediting Services
No project purchasing activities are complete without Vendor Inspection, Quality Control, and Expediting. With this in mind, FCI provides a whole range of services involving engineering inspection at the vendor’s works. From pre-shipment inspection for a letter of credit purposes to stage inspections in accordance with the Quality Control Plan, the scope of the inspection can vary. Spread across the globe, the vendor expediting services of FCI allow clients to minimize delays in equipment and materials delivery. This ensures that that projects stay on schedule. FCI also assists clients in the assessment and selection of vendors by providing vendor assessment and techni-cal capability audits. Our clients can rest assured that the equipment they buy will be delivered on time and as specified. This applies to both new construction and on-going maintenance.
Three key project purchasing activities include Vendor inspection, Quality Control and expediting. At FCI, we offer a host of services that take care of the following:
• Complete quality control of plate and tubular steel mills • Engineering inspection of mechanical and electrical equipment at the vendor’s work • Expediting at vendor’s work • Pre-shipment inspection for letter-of-credit purposes • Technical capability audits
With our services, our clients can be confident of getting their equipment on time and in accordance with the applicable specification. This is regardless of whether they need to equipment for new construction or ongoing maintenance.
Inspection
Often called Third-Party Inspection or Source Inspection, Vendor Inspec-tion covers activities performed at manufacturer’s work. This includes all types of electronic, mechanical, instrumentation, and electrical equip-ment bought for the Oil and Gas, Mining, Pharmaceutical, and Petro-chemical industries.
Whether one request is made or multiple, we can accommodate all requests made during the project. The requirements of the client determine the inspection’s scope or level which is typically controlled by a Quality Plan. The scope can range from the final inspection to a rigorous inspection arrangement that goes through the following steps:
• Pre-production meeting • Thorough identification and inspection of all raw materials • Witnessing of all tests • Inspections at all prescribed hold-point stages • Verification of all documentation and certificates • Final release inspection
We use our global network of associates and resource base of field engineers to perform the inspection. We induct all field engineers according to our Quality Management System. Additionally, we assess them on a continuing basis for competency and capability. This directly impacts the quality of our inspection services in a positive way.
VEN
DOR
INSP
ECTI
ON
&EX
PEDI
TIN
G S
ERVI
CES
Field and Desk Expediting
A key part of the procurement process today is expediting. Previously, it was thought of as a corrective function rather than a preventive one. However, expediting should become part of the project planning right from the beginning since both the project schedule and pricing are increasingly critical. This will help to ensure timely delivery.
A continuous process, expediting helps to achieve the final delivery to the job site in the quickest time possible. It is important to implement an expediting service that is independent of inspection activities. More importantly, the service should be performed by experienced field expeditors.
Depending on client requirements, expediting services may be required at different stages of a project. The stages where expediting services may apply include rectification work, shipment and packing, fabrication and assembly, submission of documentation, material deficit, and failure on test or inspection.
Technical Capability Audits
Activities performed by our Quality Assurance Engineers include:
• Supplier Evaluations • Pre-Contract Award Surveys • Vendor Surveillance • Third-Party Quality Assurance Audits
FCI performs pre-contract award surveys using highly-qualified QA Engineers who have experience of working with these manufacturers. This is highly recommended for clients who want to place orders with unfamiliar vendors or vendors they have reservations about.
Additionally, it may be useful to get a full assessment of a manufacturer as part of a ‘lessons learned’ exercise once an order with issues has been completed. The Supplier Evaluation includes, but is not limited to, the vendor’s:
• Current workload • Capacity • Quality system • Affiliations • Traceability • Number of personnel and their qualifications • Manpower • History/Client base
WEL
DIN
G C
ERTI
FICA
TIO
NA
ND
MAT
ERIA
L SE
RVIC
ES
Welding Certification & Material Services
Independent Welder Approvals and Welder Procedure Qualification are required to fulfill both statutory and client requirements. The accreditation of FCI for procedure approvals covers all types of permanent jointing to ASME, AWS and EN ISO standards. Additionally, we offer approval for other processes and codes such as brazing and different plastic joining methods like solvent welding.
Following is involved in the process:
• The procedure’s review and provisional approval • Weld procedure approval (and welder if appropriate) • Test piece production on-site surveillance against written procedures • Review of any non-destructive or other test results • Witnessing laboratory of the test pieces
The procedure requirements will determine the number of test pieces. A range of material types and sizes are covered by several procedures. The applicable code defines the requirements for laboratory testing which vary from application to application.
Welder Approval
On approval of a procedure, individual welders can be evaluated against it, using the same process. A welder approval is typically valid for two years (three for braziers). However, the welder must use the defined process regularly to keep the approval valid. Also, the welder can prolong the approval by continually meeting the criteria set.
WEL
DIN
G C
ERTI
FICA
TIO
NA
ND
MAT
ERIA
L SE
RVIC
ES
WEL
DIN
G C
ERTI
FICA
TIO
NA
ND
MAT
ERIA
L SE
RVIC
ES
Material Services
Pressure Equipment Directive (PED) and other similar EC Directives have made it mandatory for materials to prove that they fulfill their chemical and mechanical properties’ parameters. The result of this is material certificate requirements authentication. Whether you need surveillance at the mill or require subjecting material samples to a rigorous laborato-ry testing process, FCI can meet your requirements.
FCI’s material certification assessment and endorsement fulfills the requirement of a 3.2 certificate as defined in EN 10204 ‘Metallic Products-Types of inspection document’. Additionally, it covers assessment of the plastic material that is to be shortly incorporated into the above specification.
The need for full material traceability has been one outcome of the introduction of European Directives like PED. The makes it mandatory for all materials to be fully documented and traceable, from the mill to the pressure equipment manu-facturer, or the repair of such equipment.
FCI team can oversee and validate the transfer of material as well as the material certificates. The practical outcome of this is that material certificates for cut pieces can now be issued by material stockists with the same authenticity as the original certificate. Things to be supervised and recorded by FCI include:
• Heat or cast number • Cutting of the piece • Endorsement of the copy of the original certificate with an endorsement stamp • The transfer of identification
In additional to the above, FCI can validate any of your valuable material in stock that has lost traceability with mechanical and chemical testing at a recognized laboratory. This is followed by the use of a valid material in the manufac-ture of pressure equipment.
WEL
DIN
G C
ERTI
FICA
TIO
NW
ELDI
NG
CER
TIFI
CATI
ON
AN
D M
ATER
IAL
SERV
ICES
Project Name
Call-Off For Inspection and Engineering Support Services at Dukhan
Certified Lead Auditor Training Course ISO 45001:2017 - HR 2019 T 006 S
On-Call Inspection Services at Various Factories and Locations within State of Qatar for Strategic Food Security Facilities Project (SFSF)
On-Call Third Party Inspections Services for Non-Destructive Test (NDT) for Stainless Steel Welding Works for Strategic Food Security Facilities Project (SFSF)
Third Party Inspection Services for Fifth Precinct Stadium (Al Thuma-ma Stadium)
Third Party Inspections Services for Remote Transfer Project Facility
Provision of Third Party Services (NDT & TPI) for Major Station (Education City) Project
Provision of Third Party Services (NDT, Radiography, Welding and TPI))
Provision of Third Party Inspection & Certification of Equipment Services
Provision of Lifting Equipment Inspector
Provision of Management System Certification Services for IMS ISO 900:2015, ISO 14001: 2015 & 45001: 2018
Contractor
M/s. Frontier Certification International
M/s. Frontier Certification International
M/s. AlJaber Engineering
M/s. AlJaber Engineering
M/s. AlJaber- Tekfen JV
M/s. AlJaber Engineering
M/s. Redco International
M/s. Qatar Gas Group
M/s. JH Construction
M/s. TUV Rheinland
-
Client
M/s. Qatar Petroleum (QP)
M/s. Public Works Authority (ASHGHAL)
M/s. Hamad Port Project (HPP)
M/s. Hamad Port Project (HPP)
M/s. Supreme Committee for Delivery & Legacy
M/s. Hamad International Airport (HIA)
M/s. Qatar Railways Compa-ny (Qatar Rail) - Green Line
M/s. Qatar Gas Group
M/s. Public Works Authority (ASHGHAL)
M/s. Qatar Petroleum (QP)
M/s. Essex Lloyd Enterprises WLL
Status
Ongoing
Ongoing
Ongoing
Ongoing
Ongoing
Ongoing
Completed
Ongoing
Ongoing
Ongoing
Ongoing
Contact Person
Mr. Saifulla Chekku ([email protected])
Mr. Saif Ali ([email protected])
Mr. Edakkalathur Glisson([email protected])
Mr. Aly Abdalla ([email protected])
Mr. Fayaz Lone ([email protected])
Mr. Olcay Ural ([email protected])
Mr. Hadfield([email protected] )
Eng. Abd Salam([email protected] )
Mr. Sapkota([email protected])
Mr. Isson Jose ([email protected])
Mrs. Abharna P([email protected] )
SL
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
ProjectPortfolio
Project Name
Provision of QMS Transfer Certifi-cation Services (ISO 900:2015)
Third Party Services for Inspection of Lifting Equipment , Earth moving equipment & Training/ Assessment of Operators and Supply of NDT Inspector
Third Party Services for Inspection of Lifting Equipment's
Provision of Lifting and HSE Related Trainings
Provision of Lifting Inspections & Welding Services
Provision Third Party Inspection for mast climber , Third Party Inspection for Chain Blocks, Mast climber Erector Assessment
Provision of Third Party Inspection and NDT Services
Provision of Lifting Certification of Training for operators
Provision of Third Party Services for Inspection of Lifting , Earth moving equipment's & Training/ Assessment of operators
Provision of Provision of Third Party Services at Lusail Stadium
Provision of Third Party Services Full Body Harness
Provision of Third Party Services for Training & Inspection of Equipment
Provision of the Supply of Techni-cian(s) with a all the required equipment's and consumables to carry out MPI or DPT Inspection on call basis respectively
Contractor
-
M/s. Al Wataniya Concrete
M/s. Insulation Engineer-ing Company
-
M/s. Al Jaber Trading & Contracting Co. W.L.L.
M/s. Frijns Steel Construc-tion Middle East W.L.L.
-
M/s. Active Contracting & Import Co. W.L.L.
-
M/. Doha Engineering Services Co. WLL
-
-
-
Client
M/s. Arabian Specialized Materials
M/s. Public Works Authority (ASHGHAL)
M/s. Manco International
Various Govern-ment and Private Entities
Various Govern-ment and Private Entities
M/s. SEEF Limited & M/s. Redco Internation-al
M/s. Doppelmayr Services WLL
Various Govern-ment and Private Entities
M/s. Confident Equipment & Transportation Co. WLL
M/s. Supreme Committee for Delivery & Legacy
M/s. Consolidat-ed Supplies Co., WLL (CSC)
M/s. DHL Global Forwarding Qatar WLL
M/s. Electro Industries
Status
Ongoing
On-Call
On-Call
On-Call
On-Call
On-Call
On-Call
On-Call
On-Call
On-Call
On-Call
On-Call
On-Call
Contact Person
Mr. Suhaad ([email protected])
Mr. Arnold Lambarte([email protected])
Mr. Kumar([email protected])
Ms. Elvie Reyes([email protected])
Mr. Atef ([email protected])
Mr. Nash Jacob([email protected])
Mr. Manaf Cherukun-ninakath([email protected])
Mr. Souhaeil([email protected])
Mr. Mohamed Shiyas([email protected]
Mr. Mohammed Adil Khan([email protected])
Mr. Thanveer([email protected])
Mr. Sumeen Mohammed([email protected])
Mr. Ramesh Bogati([email protected])
SL
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Project Name
Provision of Third Party Services for Material Inspection, dimension-al Inspection, Fit Up & Weld Visual Inspection, Painting & Coating Inspection, Review & endorsement of coating certificates and report.
Provision of Third Party Services for Procedure Qualification/Weld-er Qualification & Renewal of Welder Certificate
Provision of Third Party Services for Lifting Inspection & MPI Testing
Provision of Third Party Services for lifting Inspection & Operator Assessment
Provision of Third Party Services for Lifting Inspection & Operator Assessment
Provision of Third Party Services for Heavy Equipment Operator Assessment & Concrete Boom Placer Machine
Provision of Third Party Services for Full Body Harness
Proposal for the Provision of Lifting Inspection Services
Provision of Third Party Services Inspection & Certification for pressure testing consoles, the scope of Inspection
Provision of Third Party Services for Welder Qualification & Renewal & Supply of Technician(s)
Provision of Third Party Inspection - Welder Qualification
Contractor
-
-
-
-
-
-
-
-
-
-
-
Client
M/s. New Center Trading & Engineering Services (NCTES)
M/s. Athab Qatar Engineering & Contracting Co, WLL
M/s. Stork Cooperation
M/s. Gunak
M/s. Great Talent Trading & Contracting
M/s. Tremix Qatar
M/s. Arabian Supply Center WLL
M/s. Yuanda Qatar
M/s. Delta Corporation
M/s. Qatar Factory
M/s. Debbas Enterprise Qatar
Status
On-Call
On-Call
On-Call
On-Call
On-Call
Completed
Completed
Completed
Completed
Completed
Contact Person
Mr. Dineshan Paleri([email protected])
Mr. Santhos Kumar([email protected])
Mr. Michael Poblete([email protected])
Mr. Omer Haciis-mailoglu([email protected])
Mr. Shihab([email protected] )
Mr. Bhaskaran(bhaskaran@-tremixqatar)
Mr. Jolly Johnson([email protected])
Mr. Henry Xiao([email protected])
Mr. Enrique W. Mag - Asin([email protected])
Mr. Nourthene Bagdadi(nourhene.bagdadi @qatarfactory.qa)
Mr. Shiek Udiman([email protected] )
SL
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Project Name
Provision of QMS Transfer Certifi-cation Services (ISO 900:2015)
Third Party Services for Inspection of Lifting Equipment , Earth moving equipment & Training/ Assessment of Operators and Supply of NDT Inspector
Third Party Services for Inspection of Lifting Equipment's
Provision of Lifting and HSE Related Trainings
Provision of Lifting Inspections & Welding Services
Provision Third Party Inspection for mast climber , Third Party Inspection for Chain Blocks, Mast climber Erector Assessment
Provision of Third Party Inspection and NDT Services
Provision of Lifting Certification of Training for operators
Provision of Third Party Services for Inspection of Lifting , Earth moving equipment's & Training/ Assessment of operators
Provision of Provision of Third Party Services at Lusail Stadium
Provision of Third Party Services Full Body Harness
Provision of Third Party Services for Training & Inspection of Equipment
Provision of the Supply of Techni-cian(s) with a all the required equipment's and consumables to carry out MPI or DPT Inspection on call basis respectively
SL
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Project Name
Provision of Third party inspection & certification for boiler for three years 2019, 2020 & 2021
Provision of Supply of Techni-cian(s) with all the requirement's and consumables to carry out alloy analysis by handheld XRF (PMI) Inspection on call basis respectively
Provision of Witness of Welder/Blazer Qualification Test, Interpretation of RT Films, Witness of Mechanical Test for Brazer Qualification Test, Review & Endorsement of Welder's Certifi-cate and Renewal of Welder Certificate
Provision of Third Party Services Lifting Inspection of Elevator
Provision of Third Party Services for Lifting Inspection of Full Body Harness
Provision of Third Party Services for Lifting Inspection of Chain Block
Provision of Third Party Services for Full Body Harness
Provision of TPI Services for Welder Certification & Renewals
Provision of Third party Services for Inspection Concrete Pumping Machine & Air Compressor, the scope of inspection
Contractor
-
-
-
-
-
-
-
-
-
Client
M/s. Keppel Seghers Engineer-ing Singapore Pte. Ltd.
M/s. Derby Oilfields Technical Services
M/s. Trags Electrical Engineering & Air Conditioning Company WLL
M/s. Hyundai Elevator
M/s. Al Jaber Electro Mechani-cal
M/s. Fibrex
M/s. Inspiron Qatar
M/s. Al Nasr Construction Dynamics WLL
M/s. Constreite Qatar for Construction Maintenance & Trading W.L.L.
Status
Completed
Completed
Completed
Completed
Completed
Completed
Completed
Completed
Completed
Contact Person
Mr. Christopher Paul Manuntag([email protected])
Mr. Sarah Joven([email protected])
Mr. Ani Thomas([email protected])
Mr. Ahmad([email protected] )
Mr. Martin Wairugi Muthoni([email protected])
Mr. Abdul Muqtad-er([email protected])
Mr. Febin Ahmed([email protected] )
Mr. Rayees Kadavath([email protected] )
Mr. Sheik Rauf([email protected])
SL
36.
37.
38.
39.
40.
41.
42.
43.
44.
Copyright @ FCI. All rights reserved.
T: (974) 4450-4339F: (974) 4478-1269E: [email protected]: www.fci-qatar.com
When it comes to Asset Integrity and Quality Solutions, a well-known name in the industry is FCI, offering a suite of professional services. These include Engineering Services, Project Verification and Certification, Supply of Highly-quali-fied Professional & Technical Personnel, Training, Quality Control and Certification, and Asset Integrity. A company with of one the largest inspection and certification scopes in the region, FCI offers both independent services and services fused in an interchangeable approach. This is to allow customers to customize solutions as per their requirements. FCI is accredited for ISO 17020: 2012 by A2LA and for ISO 17021: 2015 by IAS. Additionally, FCI is a full member of the Lifting Equipment Engineers Association (LEEA).
MSCB-191
