Date post: | 08-Aug-2018 |
Category: |
Documents |
Upload: | haroldbhie |
View: | 230 times |
Download: | 0 times |
of 4
8/22/2019 Frost Fighter
1/4
8/22/2019 Frost Fighter
2/4
Tent HeatingUnlike a direct red heater,
the Frost Fighter contains
a heat exchanger, which
allows the umes and
products o combustion to
be vented away rom the
area being heated. Indirect
heat eliminates combustion
products, which can cause
dizziness, burning eyes
and nausea. The unit can
be kept a sae distance
away rom party tents by
connecting ducts to the
ront cap outlets.
ConcreteCuringIndirect Fired heat is the
best way to cure concrete
and nish drywall there
is no excess moisture or
contaminants. Drywall will
not yellow and concrete
will set at the proper
temperature. (A remote
thermostat allows the
user to set desired
temperature levels.)
TemporaryHeatPeople and equipment
work in comortable, clean,
breathable air without umes
and exhaust contaminants.
Flexible ducts can be easily
connected to existing
ducting work while the
heater remains outside
no intererence to valuable
work space.
EquipmentPreheatingWith a barrier rom a direct
fame, expensive equipment
can be easily thawed
without damage or the risk
o re.
is safetyClean, safe, reliable portable heatwherever you need it - indoors or
8/22/2019 Frost Fighter
3/4
Railroad CarDrying Recondition rail cars
Decrease drying time after cleaning
railway cars
Clean air prevents grains and other
ragile cargo rom contamination
HazardousConditionsPipelines, Oil Patch, MinesAn indirect red unit can be used in
applications where the job site has
potentially dangerous and combustible
umes and dust. The heat exchanger
provides a barrier rom an open fame,
making it saer than other units.
Indirect red units meet the necessary
saety and environmental standards.
Industrial Painting& SandblastingIndirect heaters provide clean,
dry heat essential requirements
or accelerated drying and curing
applications.
Drying and curing concrete, plaster
and paint
Shipyards repair and maintain ships
Preheat aircraft and equipment
Tent heating and special events
Road and freeway construction
Curing and baking epoxies for tank
cleaning and industrial painting
Hoarding and temporary spot heating
Moisture control
Meets OSHA Standards. No Open Flame!
is versatility
8/22/2019 Frost Fighter
4/4
is performance
Oil Fired IndirectModel IDF 200 OIL IDF 350 OIL IDF 500 OIL
Max Capacity 210,000 BTU 350,000 BTU 500,000 BTU
Heated Air 2,800 CFM 2,800 CFM 3,100 CFM
Discharge Temp.* 150F 200F 220F
Tank Capacity 24 IMP/29 US Gal 35 IMP/40 US Gal 35 IMP/40 US Gal
Burner Motor 1/7 HP 1/4 HP 1/4 HP
Fan Motor 1/2 HP 1/4 HP 1 HP
Shipping DimensionsCrated (LxWxH) 83 X 37.5 X 52.5 83 X 37.5 X 52.5 83 X 37.5 X 52.5
Shipping weight 405lbs 575lbs 575lbs
Approved ETL CSA CSA
Propane/Natural Gas
Model IDF 200 LP/NG IDF 350 LP/NG IDF 500 LP/NGMax Capacity 210,000 BTU 350,000 BTU 420,000 BTU
Heated Air*(w/o duct) 2,800 CFM 2,8w00 CFM 3,100 CFM
Discharge Temp. 150F 200F 210F
Manifold Pressure LP/NG 1.1w.c. LP/NG 1.8w.c. LP/NG 2.8w.c.
Burner Motor 1/4HP 1/4HP 1/4HP
Fan Motor 1/2HP 1/2HP 1HP
Shipping DimensionsCrated (LxWxH) 83 X 37.5 X 52.5 83 X 37.5 X 52.5 83 X 37.5 X 52.5
Shipping Weight 405lbs 550lbs 550lbs
Approved ETL ETL ETL
*Discharge Temp. (@50F ambient)