+ All Categories
Home > Documents > FRT 18 A1 - Lidl Service Website · FRT 18 A1 ¨ Cordless Grass Trimmer Translation of original...

FRT 18 A1 - Lidl Service Website · FRT 18 A1 ¨ Cordless Grass Trimmer Translation of original...

Date post: 21-Jun-2018
Category:
Upload: vokhanh
View: 251 times
Download: 1 times
Share this document with a friend
22
FRT 18 A1 Cordless Grass Trimmer Translation of original operation manual 6
Transcript

 FRT 18 A1¨

Cordless Grass Trimmer Translation of original operation manual

661265_flo_Akku-Rasentrimmer_Cover_LB6.indd 14 14.12.10 12:17

GB / IE Translation of original operation manual Page 5

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

61265_flo_Akku-Rasentrimmer_Cover_LB6.indd 15 14.12.10 12:17

123

4

5

6

7

8

9

1011

13

1214

15

16

16

17

21

2016 19

1920

18

1716

14

2412

13

10

5

45

22

23

23

9

5

8

9

15

6

7

11

5

GB IE

Content

Safety instructions ................................5Symbols and icons ............................5General safety instructions ................6

Use ..........................................................9General description .............................10

Survey .............................................10Functional description .....................10Extent of the delivery .......................10

Charging the battery ...........................10Removing / inserting the battery .....10Recharging the battery ....................11Used batteries .................................11

Assembling instructions .....................11Operation ............................................12

Turning on and off ...........................12Checking the battery charge level ...12Trimmer settings ............................... 12

Manner of operation ............................13Cutting grass ...................................13Vertical cut / lawn edge trimming ....13

Cleaning and maintenance .................14Cleaning ..........................................14General maintenance ......................14Replacing the cutting insert .............14

Storage .................................................14Disposal and protection of the environment .........................................14Replacement parts ..............................15Technical data ......................................15Guarantee .............................................16Trouble shooting .................................17CE declaration of conformity .............18Exploded Diagram ...............................19Grizzly Service-Center ........................21

Before first using the machine, please read this instruction manual carefully, for your own safety and for the safety of others. Keep the manual in a safe place and pass it on to any subsequent owner to en-sure that the information contained therein is available at all times.

Safety instructions

Ensure that the safety instructions are ob-served when operating the trimmer.

Symbols and icons

Symbols on the trimmer

WARNING!

Carefully read these Operating In-structions.

Wear goggles and ear defenders.

After turning off the appli-ance, the cutting disk will keep revolving for a couple of seconds. Keep away from your hand and feet.

Do not expose the trimmer to moisture. Do not work when it is raining and do not cut wet grass.

Keep by-standers well away. They could be in-jured by flung out objects.

Remove the battery prior to serv-icing the appliance.

6

GB IE

Symbols in the manual

Warning symbols with informa-tion on damage and injury pre-vention.

Instruction symbols (the instruc-tion is explained at the place of the exclamation mark) with information on preventing damage.

Help symbols with information on improving tool handling.

General safety instructions

Ensure that you are completely familiar with all the operating parts before you start working with the trimmer. Ask an experienced user or expert to explain all its functions, manner of operation and working techniques, and practise operating the trimmer. Ensure that you can instantly turn off the trimmer in the event of an emergency. Incorrect use of the trimmer can result in very serious injuries.

Caution! When operating electri-cal appliances, the following basic safety precautions must be taken to protect yourself against the risks of electric shock, injury and fire:

Working with the appliance:• The appliance must not be used by

children and persons who have but incomplete knowledge of the operating instructions. Acts and local regulations may demand a minimum age for op-eration.

dB

LWA Noise level rating LWA in dB

Electrical appliances must not be disposed of with the domestic waste.

Cutting circle

Symbols on the battery

Do not dispose of batteries in house-hold waste, fire or water.

max. 60°C

Do not subject the battery to strong sunlight over long periods and do not leave it on a heater (max. 60°C).

Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner.

Symbols on the recharger

WARNING!

Before using for the first time, care-fully read through the user manual

The recharger is for indoor use only.

130°C Protective temperature limiter

Protection class II

Electrical appliances must not be disposed of with the domestic waste.

7

GB IE

• Keep the appliance away from humans - mainly from children - and pets. Sus-pend your work when humans or pets are nearby. Always keep a safety clear-ance of 15 m in all directions. The ap-pliance may fling out stones and gravel which might cause injuries.

• Wear suitable working clothes and personal protection equipment! Always wear goggles or other eye protection, ear protection, boots or shoes with non-slip soles and sturdy long trousers as well as gloves. This will reduce the risk of injury.

Do not wear long clothing or jewellery because these might be caught by moving parts. Do not operate the ap-pliance bare-footed or when wearing open sandals.

• Maintain a firm stand during operation. Be particularly careful when working down a slope. This will help you better control the appliance in unanticipated situations.

• Do not operate the appliance when you are tired or after drinking alcohol or taking tablets. Have regular breaks.

Make sure the light is good during op-eration.

• Do not work in the rain, bad weather or in wet environments. Water penetrating the appliance will increase the risk of electric shock.

• The safety device and your personal protection equipment protect your-self and the health of others and will ensure that the appliance is working properly:

Do not operate a damaged or incom-plete appliance or an appliance that has been manipulated without the manufacturer’s permission. Never operate the appliance if the safety de-

vices are defective. Prior to operation, check that the appliance is in a safe state taking specific care to check the mains lead, the switch and the protec-tive cover.

• When turning on the appliance and when the motor is running, keep the trimming assembly away from all parts of your body and mainly from your hands and feet. Risk of injury!

• Do not start the appliance when it is upside down or not in working position. Risk of injury!

• Turn off the appliance and remove the battery when: - leaving the appliance unattended, - cleaning or servicing the appliance, - replacing the trimming assembly. This precaution will prevent the ap-

pliance from starting unintentionally.• When starting or working with the ap-

pliance, make sure that the cutting disk does not contact stones, gravel, wire or other foreign bodies.

• Take care not to provoke injuries on each device used for cutting the string lengths. After pulling out a new string, always hold the machine in its normal working position before switching it on.

• After turning off the appliance, the trim-ming assembly will keep revolving for a couple of seconds:

Never try to stop the trimming assem-bly by hand. Always wait until it has stopped on its own. Risk of injury!

• Only use OEM cutting inserts. You are not allowed to use a metal insert in-stead of the plastic insert. Metal inserts may cause accidents.

• Do not use the appliance to cut grass not growing on the ground such as grass growing on walls, rocks, etc.

• Do not cross gravel walks or streets

8

GB IE

with the appliance still running. Risk of injury by flung-out stones!

• Do not operate the appliance near inflammable liquids or gases. Non-compliance causes a risk of fire or explosion.

• In the area of operation, the operator is liable for damages caused others as a result of operating the appliance.

• Check that the ventilation slots are not clogged up.

• Keep the appliance in a dry place and out of the reach of children.

• Only use spares and accessories deliv-ered and recommended by the manu-facturer. This will ensure safe operation of the appliance in the long term.

• Do not try to repair the appliance yourself. Work not described in this in-struction manual must only be done by customer service centres authorised by us.

Diligent handling and operation of bat-tery-operated tools:• To recharge the batteries, only use

chargers recommended by the manu-facturer. Battery chargers designed for a specific type of battery may catch fire if used with other types of batteries.

• Only operate the electric tools on the batteries specified. The use of other batteries causes a risk of injury and fire.

• If not in use, keep the battery away from paper clips, coins, keys, nails, screws and other small metal objects that may jumper the contacts. A short circuit between the battery contacts may cause burns or fire.

• Inappropriate use of the battery may cause liquid to escape from it. Avoid any contact with this liquid. If you do

get into contact with it wash the af-fected part with water. Also consult a doctor if the liquid gets into your eyes. Battery liquid may irritate your skin or cause burns.

• Before inserting the battery, check that the appliance is turned off. Inserting a battery in a turned-on electric tool may cause accidents.

• Recharge the batteries indoors only because the battery charger is de-signed for indoor use only.

• To reduce the electric shock hazard, unplug the battery charger from the mains before cleaning the charger.

• Do not expose the battery to strong sunlight for longer periods of time and do not deposit it on radiators. Heat will damage the battery and cause a risk of explosion.

• Allow the battery to cool down before you recharge it.

• Do not open the battery and avoid me-chanical damage to the battery. There is a risk of short circuit and the escape of vapours that will irritate the respira-tory system. Let in fresh air and consult a doctor if you are feeling physical symptoms.

• Do not use non-rechargeable batteries!

Correct handling of the battery charger• This appliance is not intended for op-

eration by persons (including children) with reduced physical, sensory or men-tal capabilities, or lacking experience and/or knowledge; unless they are under the supervision of or have been instructed on how to use the appli-ance by a person responsible for their safety.

• Children should be supervised to pre-vent them from playing with the appli-

9

GB IE

ance.• To charge the battery, use only the

charger supplied. Risk of fire and ex-plosion.

• Before each use, check the charger, cable and plug and have them repaired by qualified professionals and only with original parts. Do not use a defective charger and do not open it up yourself. This ensures that the safety of the de-vice is maintained.

• Ensure that the mains voltage matches the specifications on the charger rating plate. Risk of electric shock.

• Disconnect the charger from the mains before closing or opening connection to the battery / power tool / device.

• Keep the charger clean and away from wet and rain. Do not use the charger outdoors. Dirt and the entry of water increase the risk of electric shock.

• Operate the charger only with the ap-propriate original batteries. Charging other batteries may result in injuries and risk of fire.

• Avoid mechanical damage to the charger. This can result in internal short circuits.

• Do not operate the charger on a com-bustible surface (e.g. paper, textiles. Risk of fire due to heating during charging.

• If the power cable for this equipment is damaged, it must be replaced by the manufacturer, a customer service agent of the same or a similarly quali-fied person in order to prevent haz-ards.

• The battery of the appliance is not fully charged at the time of delivery. It therefore needs to be fully recharged before you use it for the first time. For the first recharge cycle we recommend

that you charge the battery for about 1 hour. Slot the battery into the base and plug the battery charger into a mains outlet.

• When the battery is fully charged, un-plug the charger from the mains and from the appliance. Charging time is approx. 1 hour.

• Do not charge the battery continuously since this may damage the battery cells. Note: Repeatedly charging small capacities may damage the battery cells. Recharge the battery only if the appliance is becoming slow.

• Do not use the charger to charge non-rechargeable batteries.

Use

The appliance is solely intended for cut-ting grass and weeds in the garden and for edge trimming. Any other use that is not specifically approved in these Instruc-tions can result in damage to the trimmer and give rise to serious danger for the user. Do not use the appliance to trim hedges or bushes. The appliance must only be used by adults. Young people aged 16 and over may only use the trim-mer under adult supervision.The user or operator is responsible for ac-cidents causing injury to other people or damage to property.The manufacturer cannot be held liable for damage when the trimmer is not used in conformity with its intended purpose or due to incorrect operation.

10

GB IE

General description

The illustrations are on the front fold-out page.

Survey

1 Top handle 2 On/Off switch 3 Switch lock 4 Box for cutting inserts (not vis-

ible) 5 Auxiliary handle 6 Handle rod 7 Lock of handle rod adjustment 8 Threaded bush for length adjust-

ment 9 Telescopic shaft 10 Motor head 11 Spacer bow (flower guard) 12 Cutting disk 13 Cutting insert 14 Protective cover 15 Pedal for tilt angle adjustment 16 Battery 17 Battery release button 18 Battery charge state indicator 19 Battery charger operation indica-

tor 20 Battery charger

Functional description

The trimming assembly of the manually controlled, portable, battery-operated lawn trimmer consists of a system of plastic knife/cutting insert. The appliance also features a pivoting mo-tor head, adjustable aluminium telescopic shaft, and a spacer bow.A hood covering the cutting device pro-tects the user.The following describes the functions of the operating parts.

Extent of the delivery

Carefully unpack the trimmer and check that it is complete:- Battery-operated lawn trimmer- Protective cover - Auxiliary handle- 20 Cutting inserts- Battery charger- Battery

Charging the battery

Do not expose the battery to extreme conditions such as heat or impact. Risk of injury from escaping electrolytic solution!

Prior to charging the battery, check

that its outer surface is clean and dry.

• The battery of the appliance is not fully charged at the time of delivery. It therefore needs to be fully recharged before you use it for the first time.

• Recharge the battery when you notice that the appliance is becoming slower.

• Do not keep charging the battery continuously and avoid it becoming entirely discharged since this may damage the battery cells.

The warranty excludes all defects caused by improper handling.

Removing / inserting the bat-tery

1. To remove the battery (16) from the appliance, press the release button (17) on the battery and pull out the battery.

2. To insert the battery (16), place it on the guide track (21) and push

11

GB IE

it back into the appliance. It will audibly snap in.

Do not insert the battery until the appliance is fully assembled. Risk of injury!

Recharging the battery

Overheating protection allows the battery to be charged only from a certain battery temperature. If the battery is too warm after the equip-ment has been used, it cannot be charged immediately (charge indi-cator red).

After a cooling period of a few min-utes, the charging process starts automatically (charge indicator green).

1. Remove the battery (16) from the appliance, as necessary.

2. Inser the battery (16) in the charging compartment of the battery charger (20). It will audi-bly snap in.

3. Plug the battery charger (20) into a mains outlet.

The charging indicator lamp (19) lights up:

Flashing red: fault(see “Troubleshooting”).Permanent red light: charg-ing current applied.Flashing green: charging.Permanent green light: charging complete.

Recommended charging time is approx. 1 hour.

4. When the battery is fully re-charged unplug the battery charger (20) from the mains.

5. Press the release button ( 17)

on the battery (16) and pull the battery out of the battery charger (20).

Used batteries

• If a fully recharged battery lasts for considerably shorter operating times, the battery is used up and needs to be replaced. Only use an OEM battery pack replacement available from our Customer Service.

• Always take heed of the applicable safety instructions as well as the envi-ronmental protection regulations and information (see “Cleaning and Main-tenance”).

Assembling instructions

Do not insert the battery until the appliance is fully assembled. Risk of injury!

To put on the protective cover: 1. Place the protective cover (14)

on the motor head (10) and screw it down with the 3 Phillips screws.

To put on the auxiliary handle: 2. Pull the ends of the auxiliary

handle (5) to extend the han-dle and slide it over the handle holder (22).

3. Screw down the screw (23) in the auxiliary handle (5).

To install the cutting insert: 4. Place the cutting insert (13) on

the pin (24) on the cutting disk (12) and pull out the insert until it snaps in.

12

GB IE

Spare cutting inserts are kept in the box (4) on the auxiliary handle (5).

To insert the battery: 5. To insert the battery (16), place it

on the guide track (21) and push it into the appliance. It will audi-bly snap in.

Operation

Caution: risk of injury! Do not operate the appliance without the protective cover. To oper-ate the appliance, wear suitable clothing, eye and ear protection.

Prior to every use, check that the appliance is operative. Do not block the On/Off switch or the switch lock. They must reli-ably turn off the motor when you release the switch. Do not oper-ate the appliance if one of the switches is damaged.

Please observe local regulations concerning noise protection.

Turning on and off

Maintain a firm stand and hold the appliance well with both hands and at some distance away from your body. Before turning on the appli-ance, check that it will not touch any objects.

1. Check that the battery (16) is in (see “Assembly instructions - In-serting the battery”).

2. To turn on, use your thumb to actuate the switch lock (3), then

press the On/Off switch (2). Re-lease the switch lock.

3. To turn off, release the On/Off switch (2). There is no continu-ous operation mode.

After turning off the appliance,

the trimming assembly will keep revolving for some time. Allow the trimming assembly to come to a standstill. Neither touch nor slow down the moving cutting insert. Risk of injury!

Checking the battery charge level

The battery’s ( 16) charge level is in-dicated by the charge state indicator ( 18).

Press the PRESS button on the battery.The LEDs indicate the battery’s charge level.

Recharge the battery if the red or yellow LED lights up.

Trimmer settings

To adjust the auxiliary handle:The auxiliary handle can be set to various positions. Adjust the handle such that the cutting disk slightly tilts forward in your working position.

� Loosen the screw (23) in the handle and move the auxiliary handle (5) to your favourite position. Tighten the screw in the handle.

13

GB IE

To adjust the height:The telescopic shaft allows you to adjust the appliance to your personal size.

� Loosen the threaded bush (8). Adjust the telescopic shaft (9) to the correct length and tighten the threaded bush.

To adjust the cutting angle:Changing the cutting angle lets you trim grass at places that a difficult to reach, e.g. under benches or wall offsets.

� Tread on the pedal (15) on the motor housing and tilt the telescopic shaft (9). There are 4 preset tilt angles (see “Work instructions”).

To adjust the handle rod:The handle rod can be turned by 90° and 180° (see “Work instructions”).

� Push down the lock (7) and turn the handle rod 0° 90° 180° (6) until it snaps into your favourite position.

To adjust the spacer bow (flower guard):The spacer bow keeps the trimming as-sembly away from plants and trunks not to be cut.

� Flap the spacer bow (11) down. When the spacer bow is not in use you can tip it back up into its parking position.

Manner of operation

WARNING. Danger of injury! • Do not cut moist or wet grass. • Prior to starting the appliance,

check that the cutting disk does not contact stones, gravel or other foreign bodies.

• Switch on the trimmer before you approach the grass that is to be cut.

• Do not overload the trimmer dur-ing operation.

• Avoid contact with obstacles (stones, walls, fences, etc.) as this will rapidly wear out the lines.

Cutting grass

Cut the grass by swaying the trimmer sideways to the right and left. Cut slowly while the trimmer is tilted forwards by approx. 30°.Cut tall grass by a

series of levels from top to bottom.

Vertical cut / lawn edge trim-ming

Be particularly careful and at-tentive when holding the cutting disk vertically. To avoid injuries, keep enough distance to the trimming assembly.

Setup for vertical trimming: Move the appliance to the right

and left in a slow swinging motion to trim slopes and steep inclines.

• Handle rod: 180° (see �) • Cutting angle: 0° (see �) • Spacer bow in parking position

Setup for edge trimming: To trim lawn edges, slowly move

the appliance along the lawn edges. • Handle rod: 90° (see �) • Cutting angle: 90° (see �) • Spacer bow in parking position

14

GB IE

disk are tight. • Check covers and safety devices for

damages and correct installation. Re-place as necessary.

Replacing the cutting insert

1. Slide the cutting insert (13) in-ward and push it out of the pin (24) on the cutting disk (12).

2. Place the new cutting insert (13) on the pin (24) and pull out the insert until it snaps in.

Storage

• Store the trimmer in a dry place well out of reach of children.

• Do not stand the trimmer on its pro-tective cover. Suspend it by its upper handle in such a manner that the protective cover does not come into contact with other objects. This is be-cause the protective cover could be-come deformed, thereby changing its dimensions and its safety properties.

• In order to keep the battery well charged, avoid exposing the appli-ance to extreme heat or cold in stor-age.

• Remove the battery before storing the unit for longer periods of time.

Disposal and protection of the environmentRemove the battery from the device and take the device, battery, accessories and packaging for environmentally friendly recycling.

Machines do not belong with domes-tic waste.

Cleaning and maintenance

Contact our Service Centre about repairs and servicing not described in this manual. Only use OEM parts. Risk of injury!

Turn off the appliance and, before doing any servicing, remove the battery.

The following cleaning and servicing should be done regularly. This will ensure a long and reliable service life.

Cleaning

Do not spray the appliance with water and do not immerse it in water. Electric shock hazard!

• Keep clean the ventilation slots, motor housing and handles of the appliance. Use a damp cloth or a brush.

Do not use cleaning agents or sol-vents. You may otherwise irreparably damage the appliance.

• After every trimming session, remove grass and soil from the protective cover and the trimming assembly.

• To thoroughly clean the trimming as-sembly, remove the cutting insert ( 13) (see “Replacing the cutting insert”) and use a sharp knife to clean the pin ( 24).

General maintenance

• Prior to every use, check the appli-ance for obvious defects such as loose, worn or damaged parts.

Check that the screws in the cutting

15

GB IE

Do not dispose of batteries in household waste, fire (risk of ex-plosion) or water. Damaged batter-ies may damage the environment and your health if toxic fumes or liquids leak out.

• Return the unit to a recycling centre. The plastics and metals in the unit can be sorted and appropriately recycled. Ask our Service Centre for details.

• Dispose of batteries in discharged condition. We recommend covering the pole with adhesive tape to prevent a short circuit. Do not open up the battery.

• Dispose of batteries in accordance with the local regulations. Take batteries to an old battery collection point where they will be recycled in an environ-mentally friendly manner. For informa-tion about this, ask your local waste management company or our service centre.

• Defective units returned to us will be disposed of for free.

• Throw the cut grass on the compost. Do not throw it in the normal household waste.

Replacement parts

The following spares are available from Grizzly Service-Center (see P. 21 for the address). Please indicate the machine type and the number of the spare part with your order.

Cutting inserts (pack of 20)....... 91094326Battery ...................................... 91094308Battery charger ......................... 91094285

If further spare parts should be necessary, please find the part number on the exploded drawing.

Technical data

ApplianceMotor voltage .............................18 V Idling speed ................. 8000 min-1 (rpm)Protection Class ................................. IIIRuntime ............................ max. 50 min*Cutting circle ................................25 cmWeight (without battery charger) .. 2.24 kgSound pressure level

(LpA) ........... 67.3 dB(A), KpA=2.63 dB(A)Sound power level (LwA)

guaranteed........................... 92 dB(A)measured .. 86.2 dB(A); KwA=2.63 dB(A)

Vibration (an)upper handle ........ 1.9 m/s2, K=1.5 m/s2

additional handle .. 2.2 m/s2, K=1.5 m/s2

Battery (NiMH)Nominal voltage .........................18 VCapacity ...................................... 1.7 AhCharging time ...................... approx. 1 h

Recharger ...................................18MC01Uptake voltage ........ 230-240V~50/60HzNominal consumption....................67 WVoltage output ............................18 VRecharging curren....................... 1.95 AProtection class .............................. IIProtection category ........................ IP20

* The actual runtime under load of a fully char-ged battery depends on how you work and on the load put on the trimmer during operation.

Noise and vibration values have been de-termined according to the standards and regulations mentioned in the declaration of conformity.Technical and optical changes may be undertaken in the course of further de-velopment without notice. All dimensions, references and information in this instruc-tion manual are therefore not guaranteed. Legal claims made on the basis of the

16

GB IE

instruction manual can therefore not be considered as valid.

Guarantee

• This appliance has a 36-month guar-antee; a shorter 12-month guarantee applies if the appliance is to be used for commercial purposes or for re-placement appliances according to statutory regulations. Justified guarantee claims should be reported to our Service Centre (see page 21 for telephone & fax no.s, and email address). Our Service Team will tell you more about our complaints handling procedure.

• Damage due to natural wear and tear, overload or incorrect use is excluded from the guarantee. Certain compo-nents are subject to normal wear and tear and are excluded from the guaran-tee. This specifically applies to the cut-ting insert and battery, unless the com-plaints are based on material defects.

• Furthermore, the prerequisite for guar-antee services is that the references indicated in the operating instructions regarding cleaning and maintenance have been adhered to.

• Damage, which has been caused from material or manufacturing faults, will be made good free of charge, by replacement delivery or repair.

This requires that the appliance is returned to our service center undis-mantled and with proof of purchase and guarantee.

• Repairs, which are not covered by the guarantee, can be carried out for charge by our service center. Our service center will be glad to provide you with a cost estimate.

We can only process devices which have been packaged sufficiently and which have been dispatched with cor-rect stamping.

• Note: In case of complaint or service, please deliver your device cleaned, and with an indication of the defect, to our service address.

Devices sent in freight collect - by bulk freight, express or with other special freight - are not accepted.

• Defective units returned to us will be disposed of for free.

17

GB IE

Trouble shooting

Problem Possible cause Corrective action

Appliance won‘t start

Battery discharged Recharge battery (see „Charging“)

Battery not in Insert battery (see „Operation“)

On/Off switch defectiveSend in to Service Centre for repair

Motor defective

Intermittent opera-tion

Internal loose contactSend in to Service Centre for repair

On/Off switch defective

Much vibration

Loud noise

Cutting insert broken Replace cutting insert (see „Cleaning and servicing“)

Trimming assembly dirty Clean trimming assembly (see „Clean-ing and servicing“)

Motor defective Send in to Service Centre for repair

Bad trim

Cutting insert broken Replace cutting insert (see „Cleaning and servicing“)

Trimming assembly dirty Clean trimming assembly (see „Clean-ing and servicing“)

Battery not fully charged Recharge battery (see „Charging“)

Charging not pos-sible. (Red light flashing on the battery char-ger)

Battery too warm Allow the battery to cool

Battery not placed in bat-tery charger properly Insert battery correctly (see „Charging“)

Battery charger not plugged into mains prop-erly

Plug into mains outlet correctly

Battery contacts dirty Clean contacts

Battery defective Replace battery (see „Spares“)

Battery charger defective Replace battery charger (see „Spares“)

18

GB IE

Andreas Gröschl (Technical Manager and Documentation Representative)

CE declaration of conformity

We hereby confirm that the battery-operated lawn trimmermodel FRT 18 A1(Serial number 201012000001 - 201101057400)

conforms with the following applicable relevant version of the EU guidelines:

2006/42/EC • 2004/108/EC • 2000/14/EC

In order to guarantee consistency, the following harmonised standards as well as na-tional standards and stipulations have been applied:

EN 60335-1/A13:2008 • EN 60335-2-91:2003 • EN 62233:2008 EN 55014-1:2006 • EN 55014-2/A1:2001

EN 61000-3-2:2006 • EN 61000-3-3/A2:2005 • EN 60335-2-29:2004

We additionally confirm the following in accordance with the 2000/14/EC emissions guide-line: Sound power levelguaranteed: 92 dB(A)measured: 86.2 dB(A)Compliance evaluation process carried out in accordance with Appendix VI / 2000/14/ECRegistered Office: TÜV Süd, NB 0036

Grizzly Gartengeräte GmbH & Co. KG Am Gewerbepark 2 64823 Groß-Umstadt 16.3.2011

19

GB IE

Exploded Diagram

informative

20

GB IE

21

GB IE

Grizzly Service-Center

DES UK Ltd.Unit B7Oxford Street Industrial ParkVulcan RoadBilston, West Midlands WV14 7LFTel: 0870 787 6177Tel from Ireland: 0044 870 787 6177Fax: 0870 7876168Fax from Ireland: 0044 870 787 6168Email: [email protected]

2010-12-22_rev02_gs

IAN 61265 Grizzly Gartengeräte GmbH & Co. KG Am Gewerbepark 2 D-64823 Groß-Umstadt Last Information Update: 12 / 2010 Ident.-No.: 72035010122010 - 6 6

61265_flo_Akku-Rasentrimmer_Cover_LB6.indd 13 14.12.10 12:17


Recommended