FS 800 1000 1200

High spin, freestanding washer extractors

Product Sales Guide Version: 3.1

Range - overview

FS 800 FS 1000 FS 1200

Capacity 80 kg 100 kg 120 kg

180 lbs 220 lbs 265 lbs

Drum volume (l) 807 1003 1180

RPM 750 720 695

G-factor 350 350 350

Overview

Programmer

XControl Plus

Door

Door handle

Service panel

Soap box

USB plug

Door plate for easy loading & unloading

Cabinet: Stainless steel identity

• Panels are easy to remove: easy access to all parts - Service friendly

STANDARD high quality stainless steel

Side panels

• High quality stainless steel

• Side panels can be removed:

- Easy access to all parts

- It can be removed in parts

(3 panels – electrical switchboard side)

(3 panels – soap hopper side FS800)

(2 panels – soap hopper side FS1000/1200)

Frame

• High quality steel

• Sand blasted and degreased

• Powder painted

Shaft

• Special black steel: Optimal strength

• Shaft is connected to drum

• Oversized diameters

Outer tub

• High quality stainless steel interspace inside of the outer drum

• Outer drum made from black steel

stainless steel

black steel

Seal

• Radial inox plate and 2 Viton lip seals on drum plate + 1 radial seal on front of bearing

• Viton resists to almost all laundry chemicals

• Radial seal have 2 functions: - Keeps out humidity and water from the bearings - Keeps the grease in the bearings

Bearing house

Advantage: cost efficient, long life span

• Bearing house in cast iron out of 1 piece: No bolts or welds

• Sandblasted and degreased

• Black painted

• 1+1 bearings per model

Drive

FS 800 FS 1000 FS 1200

Motor power (kW) 11 15 18.5

Wash speed (rpm) 36 33 32

Spin speed (rpm) 750 720 695

G factor 350 350 350

Pulleys

• High quality cast steel for long life span

• Easy to remove for efficient service

V-belts

• Easy to remove

• Tension is regulated by motor shift

• A correct belt tension guarantees a long life span of a belt

• Easy to adjust

Advantage:

• 6 V-belts (FS 800)

• 5 V-belts (FS 1000/1200)

Suspension

• Freestanding machines: Low installation cost

• The washing unit is suspended on shock absorbers and springs

• Vibrations damped by shock absorbers

• Due to this suspension the machine runs very smoothly

Spring Lateral shock absorbers

Springs Lat. shock absorbers

FS 800 6 6

FS 1000 6 8

FS 1200 6 8

Heating

Electrical heating

• Positioned bellow drum in the heating chamber at the side of the drum

• Easy access for quick service

• Short washing programs

heating elements

FS 800 FS 1000 FS 1200

Heating (kW) 67,5 -- --

Heating

Steam heating

• Direct steam

• Required number of bars: 3 - 8 bar

• Positioned bellow drum in the heating chamber at the side of the machine

• Steam inlet 1“ Input of steam

Soap box

• Soapbox in standard execution

• Mounted on the right side: Easy access

• 5 plastic removable compartments

• Plastic cups of 1 liter each

Water inlets

• Standard three high volume inlet valves

• Standard cool down

• 1 ½“ inlet pneumatic valves

Liquid soap connection

• Liquid soap connection: 1x ½“ as a standard

Option:

Manifold – system for mixing water and liquid soaps for external dosing of detergents (up

to 6 detergents can be connected to 1 Manifold).

FS800 FS1000/1200

Inner drum

• High quality of stainless steel

• 6 lifting ribs for ideal mechanical action

• Lifting ribs are perforated: PowerWash®

- more mechanical action - lower water consumption

FS 800 FS 1000 FS 1200

Drum volume (l) 807 1003 1180

Drum diameter (mm) 1110 1200 1300

Drum depth (mm) 838 860 870

Perforation (mm) 5

Door

• Very strong door glass resistant to high temperatures

• Very large door openings for easy loading and unloading

• Stainless steel door frame

FS 800 FS 1000 FS 1200

Door opening Ø 530 mm 530 mm 650 mm

Door lock and handle

• Safety

• Strong overdimensioned

• Easy opening

Door hinges

• Extra strong door hinges

• Combination of stainless steel and plastic rings for long life span

• Door opening FS800 – 146°

FS1000/1200 – 150°

XControl Plus programmer

• 20 pre-set programs (up to 99)

• 23 languages

• Free programable

• Factory pre-set settings:

• 5x Intensive

• 4x Standard

• 4x Eco

• 2x Extraction

• 5x Special (Sport, Mops, Jeans,..)

• Extra wash / drain steps:

- Spray - Static drain

- Cool down - Reverse drain

- Soak

• Semi-automatic weighing system -

Drain valves

• Attached to the frame directly under the tub: => Lower water consumption

• Standard 2x 103 drain valves: small objects are removed

• 90°drainvalve: Auto-rinsing effect behind the valve

• Standard 2 drain valves per model for fast evacuation: Short cycles

• Water recuperation is possible

Unbalance switch

• 1 per machine, is positioned in front of the tub

• Steel spring is activated during high unbalances

• Is positioned in the factory

• With extreme unbalances: The machine will repeat maximum 10 times (is not changeable)

• Activated when unbalances occurduring:

- low spin - high spin

Note: During installation & service always check if the unbalance switches are well positioned

USB

• Connection on the left side panel

• Export programmes from the machine

• Import* programmes to the machine

• Copy of the machine settings from machine (machine parametres)

• Import machine settings and programmes to the machine (created in TraceTech)

• Simple firmware update

Bumper

• Material: Rubber

• Protect against scratches from trolleys

• Optimum height allows stand trolley straight

by the machine´s door

Safety

• FS machines correspond to all CE and EMC directives

• Noise level below 74 dB

• Standard: Emergency button

• One mainswitch

• Buzzer at the end of the cycle

Voltages

Phase Voltage (V)

Frequency (Hz)

3 208-240 50/60

3 380-480 50/60

Option: Tilting (int. version)

• For easy loading and unloading

• Pneumatic tilting option: forward only

forward and backward

• Tilting angle is 13°

• Tilting device is connected with washer and can be operated either by XControl Plus control or by external wired control.

• Additional mounting is possible => retrofit

Option: Optiload®

• Optiload® allows automatic adjustment of water levels, heating times and liquid detergent consumption depending on the weight of linen

• Informations about weight of the load are shown on the washer display

• Feet with weighing sensors are attached on the bottom of washer frame

• Weighing cells could work in combination with the tilting option

Sensors position Foot with weighing sensor

Option: Warning light & horn

• A warning light & horn will be activated when program is finished

Transport

Net weight Gross weight Dimensions

(HxWxD)

Transport dimensions (HxWxD*)

Volume

(kg) (kg) (mm) (mm) (m3)

FS 800 2640 2830 1985x1495x1940 2200x1690x1950 7.25 FS 800

FS 1000 3170 3410 2060x1790x2005 2345x1865x2125 9.29 FS 1000

FS 1200 3480 3710 2085x1855x2085 2340x2000x2170 10.16 FS 1200

Markets

1. Robust construction Overdimensioned frame, shaft, springs and shock absorbers for smooth operation

2. Easy loading and unloading of the linen FS800/1000: 53cm FS1200: 65cm

3. Tilting & OptiloadTM available Tilting can be in combination with the weighing system Retrofit possible

4. Easy access to vital parts Easy to remove side & rear panels

5. XControl+TM

Optimal position of the programmer for easy operation Free programmable timer by USB, laptop or controller

6. Drain Standard two drain valves (2x 4“)

Top benefits

This is a non-binding and indicative tool made available to Primus distributors for internal use only. Proprietary rights with regard to this tool belong to Alliance CE s.r.o. No guarantee can be given that its results are up-to-date and accurate and it should therefore be used with particular circumspection. This tool should by no means be transmitted to any third party or otherwise made public. Please inform Primus’ marketing team of any remark you have in respect of this tool. © 2015 Alliance CE s.r.o. All rights reserved.

Visit our Primus channels: