Date post: | 14-Jul-2015 |
Category: |
Business |
Upload: | e-direct-division-of-endresshauser |
View: | 70 times |
Download: | 0 times |
Products Solutions Services
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Technical DatasheetTD 00028E/24/EN/01.13
• Simple operation• Proven principle• Slip clutch
Complete product information:www.e-direct.us/fte31
Specs at a glance:
•Product: Bulk solids ≤ 50 mm (1.97”) grain size
•Process pressure: 7 to +26 psi (0.5 to +1.8 bar abs.)
•Approval: Dust-Ex-Zone 10 and 20
•Product temperature: -4 to +176 °F (-20 to +80 °C)
Paddle point level switch for solids
SoliswitchFTE31
$ 311.00
41 42 43
41 42 43
SoliswitchFTE31 2
Overview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Application / Function
Application The Soliswitch FTE31 is a paddle point level switch used as a full, empty and demand alarm on silos containing solids. Its construction and materials make the unit suitable for use in the food industry. Certification to dust Zone 10 and dust Zone 20 provides more application possibilities.
ApplicationexampleFunction A reduction gear and synchronous motor rotate the shaft and paddle. If the paddle is stopped by material covering it, the hinged motor in the housing moves from the rest position to the switch position. This movement operates two switch contacts - the first is for external level indication and the second switches the power off to the motor. When the medium level falls below the paddle, the hinged motor returns to its rest position, the two contacts switch to normal operation, and the paddle starts to rotate. Intermittent loads that operate against or even in the same direction of rotation are evened out by using a slip clutch.
Level measurement changeover contact
SoliswitchFTE31 3
Application / FunctionOverview
Electrical connection Price table ContactGo to shop
DimensionsTechnical data
Technicaldata Installation Dimensions(ininches)
The installation area must be vibration-freeDimensions in inch
Correct installation:a) Vertically from top of silob) Angled from the topc) From the sided) With protective cover against falling solids Incorrect installation:e) In direction of solids flowf) Installation coupling too longg) Horizontally with shaft length > 300 mm; not valid for version with
strengthened shafth) Angled from below
Power supplySupply voltage 230 V AC (relay 250 V AC)
20 to 28 V DC (relay 250 V AC)Cable entry PG 13.5
Operating conditionsMechanical load Max. 60 N on the shaft;
Max. 1500 N on strengthened shaftLoad in the rope Max. 1500 NOperating pressure 7 to 26 psi (0.5 to 1.8 bar)Ambient tempersture -4 to +140 °F (-20 to +60 °C)Degree of protection IP 65 with closed lid; IP 20 with open lidVibration protection IEC 654-3, dimensions V.S.1
(v < 3 mm/s, 1 < f < 150 Hz)Process temperature -4 to +176 °F (-20 to +80 °C)Solids weight 100 g/lGrain size Up to 50 mm (1.97”)
Mechanical constructionMaterial Housing: Plastic with 30 % fiber glass;
shaft: Stainless steel 1.4305;paddle: Stainless steel 1.4305;O-ring seal: NBR;shaft seal: NBR Perbunan;rope extension: Stainless steel 1.4401 withstainless steel 1.4305 weight;hinged paddle: Stainless steel 1.4435;protection tube/cover: Stainless steel1.4301
Shaft bearing High power friction bearing, maintenance-free
Shaft resolution Approx. 1 rotation per minuteProcess connection Threaded boss - thread G 1½" BSPElectrical connection Plug-in screw terminals 2.5 mm² solid core,
1.5 mm² core with ferrule
ApprovalsEx approval Dust Ex Zone 10/20
~9.84 ~7.87
~7.87d)
c)
b)
a) a)
e)
g)
h)
f)
4.33
3.15
Installation according to instruction manual.
4.65
2.95
1.4
0.9
8
SoliswitchFTE31 4
Application / FunctionOverview Technical data Dimensions
ContactGo to shopPrice tableElectrical connection
Pricetable
Moreproductstocompleteyourmeasuringpoint…
Soliswitch FTE31, thread NPT Order no. Price/pcs. in USDExecution Power Supply 1 to 5 6 to 10 11 to 35Shaft 75 mm; compact 115 V AC, relay 250 V AC, 100 mA -10 A FTE31-B2A111 353.00 328.00 311.00Prices valid until 09.30.2013 in U.S. dollars per unit (not including shipping and applicable sales tax).See Endress+Hauser, Inc. Terms and Conditions of Sale for shipping, tax, and payment terms.
Complete product information:www.e-direct.us/fte31
Electricalconnection
PE: Earth (Ground) connectionN (AC), - (DC): Power connectionL (AC), + (DC): Power connection41: Normally closed contact42: Common43: Normally open contact
43
42
41
43
42
41
PEGround
L1
N
L1
N
+
–DCAC
Vibroniclimitswitch Soliphant T FTM20
RTDthermometer Omnigrad T TST187
DigitalindicatorRIA46
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Contact
E-directEndress+Hauser, Inc.2350 Endress PlaceGreenwood, IN 46143
Direct order
Internet www.e-direct.usby phone 888- EH-DIRECT
(343-4732)per Fax 317-535-8498E-Mail [email protected]