Date post: | 29-Mar-2015 |
Category: |
Documents |
Upload: | jimena-rayment |
View: | 224 times |
Download: | 0 times |
Fuel Cells: Basics and Applications&
How do fuel cell cars work?Ajay K. Prasad
Professor, Department of Mechanical Engineering
Director, Center for Fuel Cell Research
University of Delaware
What is a Fuel Cell?
• A fuel cell combines fuel and oxidant electrochemically to produce electricity
• Two to three times more efficient that an internal combustion engine
• Fuel cell stack is quiet, has no moving parts, produces zero emissions
Fuel CellHydrogen Oxygen
WaterElectric power
Heat
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
Voltage = 0.6 V
PEM fuel cell
Cathode Reaction
O2 + 4H+ + 4e- 2H2O
Air
Anode
Cathode
e-
Membrane Electrode Assembly
Gas Diffusion Layer
Gas Diffusion Layer
H2
Bipolar plate
Bipolar plate
Load
H+
Anode Reaction
2H2 4H+ + 4e-
NIST
PlatinumCatalyst
Carbonblack
3kW, 48Vfuelcellstore.com
PEM fuel cell “stack”
A small stack of about 10 cells
NMSEA
NREL
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
GM’s skateboard chassis idea.
Honda FCX Clarity
Automotive fuel cells (PEM)
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
Mercedes-Benz: Citaro fuel cell bus on the streets of London. Engine supplied by Ballard.
European Fuel Cell Bus Project, which saw 30 fuel cell buses operating on the roads of Europe over the past two years.
Toyota: The FCHV-BUS2 is a large, low-floor, fuel-cell hybrid bus.
Since its exhaust is free of NOx (nitrogen oxides) and PM (particulate matter), it can help improve air quality in urban areas.
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
Casio: World's smallest fuel cell for use in laptop PC. The polymer electrolyte fuel can power a typical laptop computer for eight to 16 hours.
Samsung Electronics: 100Wh laptop PC fuel cell using 100cc of methanol solution, enabling continuous usage for more than 10 hours without recharging.
Fuel cells for portable power (DMFC)
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
Fuel cells for stationary power (SOFC)UTC Fuel Cells: 5kW fuel cell power plants for backup power for telecommunications towers, power for small businesses, and residential use.
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
UTC Fuel Cells: (PureCell™ 200) 200kW of electricity and 900,000 BTUs of usable heat. This system provides clean, reliable power at locations including a New York City police station, a major postal facility in Alaska, a credit-card processing system facility in Nebraska, and a science center in Japan.
Pros and Cons of Fuel Cells
Advantages of Fuel Cells
1. Higher efficiency compared to IC engines
2. Zero emissions at the point-of-use
3. No moving parts in the stack, so quieter
Challenges Facing Fuel
Cells
1. Cost (materials, labor, economy of scale)
2. Durability (membrane, catalyst)
3. Lack of H2 Infrastructure: H2 is difficult to produce, transport, and store
Fuel Cell Technology: Basics and Applications © Prof. Ajay K. Prasad University of Delaware
UD Fuel Cell Hybrid Bus ProgramUD Fuel Cell Bus Program: 2005-2011• Phase 1: 22-ft bus, 20 kW stack, Ni-Cad batteries (in operation, 100 students/day)
• Phase 2: 22-ft bus, 40 kW stack, Ni-Cadbatteries (Spring ’09)
• Phase 3: 30-ft bus, 40 kW stack, Li-Ti batteries (2010)
• Phase 4: 30-ft bus, 40 kW stack, Li-Ti batteries (2011)
H2 Refueling station atAir Liquide
• H2 refueling station in Newark since 2007• Two more H2 stations in Wilmington and Dover
How do fuel cell cars work?
Components of a fuel cell car
• Fuel cell stack• Balance of plant: Air compressor, hydrogen recirculating pump, air and hydrogen humidifiers, coolant pump and radiator
• Hydrogen storage tank
• Battery for hybrid operation
• Boost converter and inverter
• Traction motor and transmission
• Computer for control and management
Schematic of direct-hydrogen pressurized FCS
R.K. Ahluwalia et al. / Journal of Power Sources 152 (2005) 233–244
Schematic of electric drive train for FCHEV
R.K. Ahluwalia et al. / Journal of Power Sources 152 (2005) 233–244
Energy Flow within components for FCHEV
Energy flow within the components of FCHEV for FUDS: FCHEV with 65kWe FCS and 55kWe ESS. R.K. Ahluwalia et al. / Journal of Power Sources 152 (2005) 233–244
Requirements for FCHEV
To be competitive with the conventional ICE propulsion system in terms of drivability and performance, the FCS must satisfy the following requirements:
•FCS alone must meet vehicle power demands under all driving conditions: Top sustained speed of 100 mph, and 55 mph at 6.5% grade for 20 min.
•With the assistance of ESS, the FCS must allow 0 to 60 mph in 10 s.
•1 s transient response time for 10–90% power.
•FCS must reach maximum power in 15 s for cold start from 20 ◦C ambient temperature, and in 30 s from −20 ◦C ambient temperature.
Series and Parallel Hybrid Fuel Cell Vehicles
Series Hybrid:•Small fuel cell, large battery bankBattery drives motor at all times•Fuel cell operates continuously and keeps battery charged•Fuel cell is not “load-following”
Parallel Hybrid:•Large fuel cell, small battery bank•Fuel cell drives motor at all times, it is “load-following”•Battery provides boost power as and when required
The Honda FCX Clarity
Engine: 100 kW, 57 liters, 148 lbFuel economy: 74 mpggeRange: 280 milesH2 Storage: 4.1 kg at 5000 psi