Wiring Accessories2009W
iring
Acc
esso
ries
200
9
ZD 028 INT-09
�
From Single Product to Complete System
Hager products continue to provide solutions. When we
started our company over 50 years ago, we set out a
simple tenet, which remains intact to this very day. This
is to make a technological contribution to enhancing
our standard of living, by developing safe, secure,
economical and stylish products. This philosophy has
been applied to our new range of wiring accessories.
This independent status means that we can continue
to make strategic investments within the business, to
ensure we meet the needs of a continuously developing
global market place.
WEST MEETS EAST- SYSTEM 10088Interesting things always happen when different minds relate to each other. New exciting artistic directions are found when we try to get a deep understanding of our neighbors’ work, instead of looking for truth only in our own personal history.
As a European designer I am clearly aware of the design values we have been building up for more than a century in this continent. But I am even more lucky to travel all over this planet. My encounter with Asia and particularly China is a very intensive one. A great ancient Culture looking towards the future. Too many impressions to talk about here.
The design of 10088 is my personal tribute to “West meets East”.
Product Designer:Erwing Van Handenhoven
�
�
Design Awards
Hager sets the highest possible standards for Wiring
Accessories design, engineering and production.
This quality and design excellence is reflected in the
Design Awards hager has received for it’s ranges in
France, Germany, UK & Australia.
Product design award 2007
Australian design award 2006
Trophées innovation award 2006UK Product design award 2008
�
AFAQ Intertek
Certification
In line with the Hager policy of
continuing to listen to the market
and activity support, the needs of the
customer, Hager continues to make
major investments in independent
certification of its products.
With this policy in mind Hager has
made the commitment to have its new
range of wiring accessories tested by
international recognised test houses.
It is through Hager's desire to support
customer needs and take a professional
approach that customers of the new
wiring accessory range can be confident
in the compliance of products to their
respective standards.
NEMKO PSB
�
6
Make the switch
NNNNNNNNN7
Unique design❏ Slim front plate
❏ Combination of gloss and matt fi nish
Shutter❏ All sockets equipped with shutters preventing single object intrusion
❏ Safe for your children
Removal slot❏ No damage to the wall when removing
Blue LED❏ Location or ON indicator
Screws in one direction ❏ Easier for installation
Cover with gold or sliver strip❏ More choice for your decoration
Available in four colours
Glow in dark❏ Grow in dark (4-5 hours)NNNN
�
The large convex rocker switch feature provides a subtle feel when switching.
The product is available in a full range of colours and finishes, which ensures
the compatibility of the switches with the interior design. The changeable
clip on cover enables you to mix and match to create your own product
character.
The unique "Blue Mechanism" represents Hager's Professional products in
order to ensure quality and safety. System 100��* has obtained the British
certificate under the International Third Party Laboratory Nemko UK.
The system 100�� with
large convex rocker
switch is designed for
distinctive appearence
in environments such as
hotels, offices or homes.
System 100��
System 100��
9
Wall switches P.10
Bell switches P.11
Dimmer and control switches P.11
Double pole control switches P.12
32A & 45A double pole control switches P.12
Cooker control unit P.12
Special marked units P.13
Hotel range P.13
Communication & data P.14
13A socket outlets P.15
5A socket outlets P.15
15A and 16A socket outlets P.16
Shaver socket P.16
10A socket outlets P.17
Accommodation plates and modules P.17
Fused connection units P.1�
Connection units P.1�
Others P.19
Mould blank plates P.19
Colour 100�� P.20
Decoration cover P.21
10
Wall switches
Description Pack Cat Qty. Ref.
Large dolly switches with fluorescent strips 10AX1 gang 1 way, large dolly 10 WGL111
1 gang 2 way, large dolly 10 WGL112
1 gang intermediate large dolly 10 WGL101
2 gang 1 way, large dolly 10 WGL121
2 gang 2 way, large dolly 10 WGL122
3 gang 1 way, large dolly 10 WGL131
3 gang 2 way, large dolly 10 WGL132
Large dolly switches with LED 10AX 1 gang 1 way, large dolly 10 WGL111N
1 gang 2 way, large dolly 10 WGL112N
2 gang 1 way, large dolly 10 WGL121N
2 gang 2 way, large dolly 10 WGL122N
3 gang 1 way, large dolly 10 WGL131N
3 gang 2 way, large dolly 10 WGL132N
Large dolly switches with fluorescent strips 20AX 1 gang 1 way, large dolly 10 WGL211
1 gang 2 way, large dolly 10 WGL212
2 gang 1 way, large dolly 10 WGL221
2 gang 2 way, large dolly 10 WGL222
3 gang 1 way, large dolly 10 WGL231
3 gang 2 way, large dolly 10 WGL232
Large dolly switches with LED 20AX 1 gang 1 way, large dolly 10 WGL211N
1 gang 2 way, large dolly 10 WGL212N
2 gang 1 way, large dolly 10 WGL221N
2 gang 2 way, large dolly 10 WGL222N
3 gang 1 way, large dolly 10 WGL231N
3 gang 2 way, large dolly 10 WGL232N
• Complies with BS EN 60669-1, a.c only IEC 60669-1 CB certificate
• 'X' rated - No need to derate for fluorescent loads
• Supplied with M3.5 x 25mm long fixing screws
• Switches available with Blue LED for illuminated identification in a dark environment
• All switches with LED are pre-wired as location indicator
• All switches without LED have glow in the dark fluorescent indicators
• Capacity of each terminal: 3 x 1.5mm2
2 X 2.5mm2
• Two way switches can be
wired either 1 way or 2 way • Terminal markings denote: L1 = one way L2 = two way C = common
• Material: Polycarbonate
WGL121/ 122WGL111/ 112
WGL131/ 132
WGL111/ 112N WGL121/ 122N
WGL131/ 132N
WGL101
WGL231/ 232
WGL221/ 222WGL211/ 212
WGL231/ 232N
WGL221/ 222NWGL211/ 212N
11
Bell switches
• Complies with BS EN 60669-2-1 IEC 60669-2-1 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 1.5mm2 conductors
• Dimmers can control incandescent lamps only
• Material: Polycarbonate
WGLD600
Description Pack Cat Qty. Ref.
Dimmer and fan control switch600W 1 gang, large dolly 10 WGLD600Dimming switch with neon (cycle action)
Description Pack Cat Qty. Ref.
Bell switches single pole 10A
Marked bell large dolly 10 WGL11B
Marked press large dolly 10 WGL11P
• Complies with BS EN 60669-1
• Bell push / press can be wired to make 250V a.c.
• Supplied with M3.5 x 25mm long fixing screws
• With fluorescent strip
• Capacity of each terminal: 3 x 1.5mm2
2 X 2.5mm2
• Material: Polycarbonate
Dimmer and fan cont rol switch
WGL11B
WGL11P
12
Double pole control switches
• Complies with BS EN 60669-1, a.c. only IEC 60669 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 1 x 16mm2
E: 2 x 16mm2
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Double pole control switches20AX 1 gang, large dolly with (RED) neon 10 WGL2D1N
20AX 1 gang, large dolly 10 WGLD2D1WGL2D1N
Description Pack Cat Qty. Ref.
Double pole control switches32A with (RED) neon 10 WGR32D1
45A with (RED) neon 10 WGR45D1
45A DP cooker unit (size 2) 10 WGR45D2WGR45D2
WGR32D1WGR45D1
WGR45CCU
Description Pack Cat Qty. Ref.
Double pole cooker control unit45A cooker control unit (size 2) 5 WGR45CCU
• Complies with BS EN 60669-1, a.c. only IEC 60669-1, CB certificate
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 1 X 16.0mm2
E: 2 X 16.0mm2
• Material: polycarbonate
• Complies with BS 4177, a.c. only
• Combined switch / sockets have double pole 45A main switch & 13A switched socket outlet
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 1 x 16mm2 E: 1 x 10mm2
• Marking on cooker control units: ON, OFF and circuit identification cooker and socket
• Material: Polycarbonate
Cooker control unit
32A and 45A double pole control switches
WGLD2D1
13
Special marked units
Description Pack Cat Qty. Ref.
Double pole control switch with special marking 20AX 1 gang, large dolly with (RED) neon 10 WGL2D1WHmarked "Water Heater"
WGL2D1WH
Special marks Abbreviation"Air Conditioner" - AC"Cooker Hob" - CB"Cooker Hood" - CH"Computer Power" - CP"Dryer" - DR"Dish Washer" - DW"Fridge" - FR"Oven" - OV"Water Heater" - WH"Washing Machine" - WM
Surcharge applies
Hotel range
WGHKT
WGHDC WGHBD
WGHKTCARD
• Complies with BSEN 60669-1 • Supplied with M3.5 x 25mm long fixing screws
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Hotel rangeKey tag switch with key card (time delay 60s) 5 WGHKT
Key card only 5 WGHKTCARD
"DND" & "Please clean up" switches with (RED) neon 10 WGHDC
"DND" & "Please clean up" indication box with door bell switch 10 WGHBD
14
Communication and data
• Supplied with M3.5 x 25mm long fixing screws
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Communication and dataTelephone outlet (BS style master) 10 WGT1M
Telephone outlet (BS style slave) 10 WGT1S
TV co-axial outlet 10 WGTV75
TV/ FM splitter isolator SCV outlet (size 2) 10 WGTVFM2 (blank plate only)
RJ45 data outlet (1 mod) Cat 5e 10 WGT1RJ5
RJ45 data outlet (2 mod) Cat 5e 10 WGT 2RJ5
RJ45 data outlet (1 mod) Cat 6 10 WGT1RJ6
RJ45 data outlet (2 mod) Cat 6 10 WGT2RJ6
RJ11 + RJ45 data outlet 10 WGTD
RJ11 data outlet (1 mod) 10 WGT1RJ
RJ11 data outlet (2 mod) 10 WGT2RJ
RG6 cable TV outlet 10 WGTV75F
Branching terminal 5-pair tel. terminal 10 WGTBT5
WGT1M WGT1S
WGTV75
WGT1RJ5WGT1RJ6
WGT2RJ5WGT2RJ6
WGTD WGT1RJ
WGT2RJ
WGTVFM2
WGTBT5
WGTV75F
15
13A socket outlets
• Complies with BS 1363 Pt 2, a.c. only SS145
• All terminal screws upward facing for ease of installation
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 x 4.0mm2
E: 3 x 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Tough plastic back for durability
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Socket outlets 13A single unswitched 10 WGS113
13A double unswitched (size 2) 5 WGS213
13A single switched 10 WGS113S
13A double switched (size 2) 5 WGS213S
13A single switched with neon 10 WGS113N
13A double switched with neon (size 2) 5 WGS213N
WGS113
WGS213
WGS113S
WGS213S
WGS113N
WGS213N
* Socket are with FREE dust preventive sticker to give additional protection during installation* Sockets with red dolly are also available
Dust preventive sticker
• Complies with BS 546 SS472
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 3 X 2.5mm2
E: 4 X 1.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Socket outlet 5A round pin switched 10 WGS105S
WGS105S
5A socket outlet
16
15A and 16A socket outlets
Description Pack Cat Qty. Ref.
Socket outlets 15A round pin unswitched,with shutter 10 WGS115
15A round pin switched,with shutter 10 WGS115S
German style sockets 16A German style socket (without shutter) 10 WGS116
16A German style socket (with shutter) 10 WGS116S
• Complies with BS 546 SS 472 IEC 60��4 (for WGS116/ 116S)
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 X 4.0mm2
E: 3 X 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
WGS115 WGS115S
WGS116WGS116S
Description Pack Cat Qty. Ref.
Shaver socket 115V /230V [20VA] (size 2) 1 WGS200
• Complies with BS EN 6155�-2-5 IEC 6155�-2-5 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Designed for use in bathrooms and washrooms and incorporates a double wound isolating transformer for an earth free supply.
Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets rating 20VA on either voltage
• Capacity of each terminal: 2 x 2.5mm2
• Primary circuit is protected by a self-resetting thermal overload device. Insertion of shaver plug automatically switches on the transformer, removal automatically switches it off. A positive interlock prevents 2 plugs being inserted simultaneously
• Material: Polycarbonate
WGS200
Shaver socket
17
• Complies with IEC ��4-1 BS 5733 (for WGS10IS)
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 X 4.0mm2
E: 3 X 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Socket outlets 16A 3 pin unswitched universal socket,with shutter 10
10A 2 pin switched universal socket,with shutter 10 WGS10US
16A 3 pin unswitched twin universal socket,with shutter 10 XS9 322P
10A switched multi international socket,with shutter 10 WGS10IS
10A-16A socket outlets
XS9321P
WGS10US
XS9322P
WGS10IS
Description Pack Cat Qty. Ref.
Euro accomodation plates Accommodation plate (for 2 modules) 20 WGVE2
Accommodation plate (for 3 modules) 20 WGVE3
Remarks: 1 module = 22.5mm X 45mm
Modules 10A multi international socket ,with shutter 45mm x 45mm, 10 WGSM10I
16A 2 pin Euro American socket ,with shutter 22.5mm x 45mm 10 WGSM216EA
16A 3 pin Euro American socket ,with shutter 45mm x 45mm 10 WGSM16EA
16A 3 pin Twin Euro American socket ,with shutter 45mm x 67.5mm 10 WGSMT16EA
13A BS socket ,with shutter 45mm x 45mm 10 WGSM113
Accommodation plates and modules
WGVE2 WGVE3
WGSM10I
WGSM216EA
WGSM16EA
WGSMT16EA
WGSM113
WGS10US
XS9 321P
1�
Description Pack Cat Qty. Ref.
Connection unit 25A connection unit with flex outlet 10 WGR25
WGR25
• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws
25A connection unit • Capacity of each terminal: L, N: 2 x 6.0mm2
E: 2 x 6.0mm2
• Material: polycarbonate
Connection unit
Description Pack Cat Qty. Ref.
Fused connection units13A fused with flex outlet 10 WGR13
13A switch fused with flex outlet 10 WGR13S
13A switch fused with neon and flex outlet 10 WGR13SN
• Complies with BS 1363 Pt 4, a.c. only
• Cable clamp accommodates up to 2.5mm2 flexible cord
• Supplied with M3.5 x 25mm long fixing screws
• All switched units are double pole
• Capacity of each terminal: L, N: 3 X 4.0mm2
E: 2 X 4.0mm2
• All units fitted with a 13A fuse link to BS 1362, can be supplied with 2A, 5A fuse link.
• Material: polycarbonate
• Optional flex outlet - for choice of use
WGR13 WGR13S
WGR13SN
Fused connection units
19
Others
WGD001
Description Pack Cat Qty. Ref.
Door chime • Complies with BS EN 60335-1, IEC 60669-1 10 WGD001
• 250V AC or 4.5V DC (AAA x 3)
• Frequency 50 Hz
• With adjustable melody/ ding dong sound
• Supplied with M3.5 x 25mm long fixing screws
Description Pack Cat Qty. Ref.
Blank plates Blank plate (size 1) 20 WGV1
Blank plate (size 2) 10 WGV2
WGV2
• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws
• Material: Polycarbonate
WGV1
Moulded blank plates
20
Description Pack Cat Qty. Ref.
Only sell separately Clip on cover Carbon (size 1) 40 WGC1CA
Clip on cover Carbon (size 2) 20 WGC2CA
Clip on cover Titanium Grey (size 1) 40 WGC1TG
Clip on cover Titanium Grey (size 2) 20 WGC2TG
Clip on cover Mother of Pearl (size 1) 40 WGC1MP
Clip on cover Mother of Pearl (size 2) 20 WGC2MP
Clip on cover with Gold strip (size 1) 40 WGC1-GD
Clip on cover with Gold strip (size 2) 20 WGC2-GD
Clip on cover with Silver strip (size 1) 40 WGC1-SV
Clip on cover with Silver strip (size 2) 20 WGC2-SV
Clip on cover Whtie (size 1) 40 WGC1
Clip on cover White (size 2) 20 WGC2
Decoration cover
WGC1TG
WGC1CA WGC2CA
WGC1-SV WGC2-SV
WGC1-GD WGC2-GD
WGC1 WGC2
WGC2TG
WGC1MP WGC2MP
21
Colour 100��
WGL 111MPWGL111TGWGL111CA
CA: Carbon TG: Titanium Grey MP: Mother of Pearl
WGL111CA
System 100��(A). Colour Code & Reference*** All below colour for System 100�� only.
Item Colour Reference Colour Code 1 Carbon CA2 Titanium Grey TG 3 Mother of Pearl MP
(B). Ordering1. If whole product is in WHITE colour:
Reference Clip on cover ProductEg: WGL111 White White
2. If whole product is colour sprayed:
Eg: Reference Clip on cover Product WGL111CA Carbon Carbon
WGL111
WA Product Ref. Colour Ref.
WG _________ _____
Colour specially for system 100��
22
With System 8000 we have developed a very slim front plate with modern
aesthetically pleasing curves, the fixing screws are concealed by integral
plastic caps, which ensure the product has a very clean look. The front plate
colour is cool white, which provides a shiny clean finish for the modern home
or office design. The very distinctive integral rocker "ON" indication ensures
complete confidence in contact position.
The unique "Blue Mechanism" represents Hager's Professional products in
order to ensure quality and safety. System 8000* has obtained the British
certificate under the International Third Party Laboratory Nemko UK.
System 8000
System 8000
23
Wall switches P.24
Bell switches P.24
Dimmer switches P.25
20A double pole control switches P.25
32A & 45A double pole control switches P.26
Cooker control unit P.26
Special marked units P.26
Communication and data P.27
Mould blank plates P.27
13A socket outlets P.28
5A socket outlets P.29
15A socket outlets P.29
10A socket outlets P.30
Fused connection units P.31
Connection units P.31
Lampholders P.32
Mounting box P.33
24
Wall switches
• Complies with BS EN 60669-1, a.c only IEC 60669-1 CB certificate • 'X' rated - No need to derate for fluorescent loads
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: 3 x 1.5mm2 2 X 2.5mm2
• Two way switches can be wired either 1 way or 2 way
• Terminal markings denote: L1 = one way L2 = two way C = common
• Material: Polycarbonate
• Complies with BS EN 60669-1 IEC 60669-1
• Bell push / press can be wired to make 250V a.c.
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: 3 x 1.5mm2 2 X 2.5mm2
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Bell switches single pole 10A Marked bell 10 XP8910
Marked press 10 XP8911
Bell switches
XP8110/ 8120XP8211/ 8212
XP8001
XP8210/ 8220XP8221/ 8222
XP8310/ 8320XP8231/ 8232
XP8410/ 8420XP8241/ 8242
XP8510/ 8520
XP8910 XP8911
XP8110RED
Description Pack Cat Qty. Ref.
Plate switches 10AX 1 gang 1 way 10 XP8110 1 gang 2 way 10 XP8120
2 gang 1 way 10 XP8210 2 gang 2 way 10 XP8220
3 gang 1 way 10 XP8310
3 gang 2 way 10 XP8320
4 gang 1 way 10 XP8410 4 gang 2 way 10 XP8420
5 gang 1 way 10 XP8510
5 gang 2 way 10 XP8520
1 gang intermediate switch 10 XP8001
Plate switches 20AX 1 gang 1 way 10 XP8211
1 gang 2 way 10 XP8212
2 gang 1 way 10 XP8221
2 gang 2 way 10 XP8222
3 gang 1 way 10 XP8231
3 gang 2 way 10 XP8232
4 gang 1 way 10 XP8241
4 gang 2 way 10 XP8242
*Red dolly series
1 gang 1 way 10 XP8110RED
*Remark: please contact your local sales office for this customised product.
25
Dimmer and fan controller switches
Description Pack Cat Qty. Ref.
Dimmer switches 500W 2 way switched single dimmer 5 XP8515
500W 2 way switched twin dimmer 5 XP8525
Fan controller400VA 2 way switched fan control 5 XP8105
Description Pack Cat Qty. Ref.
Double pole control switches20AX 10 XR8200
20AX with neon 10 XR8206
20AX double pole switch + 10AX single pole switch 10 XR8203
20AX double pole switch + twin 10AX single pole switch 10 XR8204
20AX double pole control switch with optional cable & neon 10 XR8207
20AX double gang with neon 10 XR8222
• Complies with BS EN 60669-2-1, a.c only IEC 60669-1 CB certificate
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: 3 x 1.5mm2 conductors 2 x 2.5mm2 conductors
• Frequency 50Hz
• Rating 500W max
• For incandescent lamps only
• Max 150W for halogen lamps
• Material: Polycarbonate
• Complies with BS EN 60669-1, a.c. only IEC 606691-1 CB certificate
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 2 X 6.0mm2
E: 2 X 4.0mm2
• Material: Polycarbonate
20A double pole control switches
XP8515 XP8525
XP8105
XR8200
XR8203 XR8204
XR8206
XR8222XR8207
26
32A and 45A double pole control switches
Description Pack Cat Qty. Ref.
Double pole control switches32A with neon 10 XR8327
45A with neon 10 XR8457
45A DP cooker control unit on plate (size 2) 10 XR8456
Cooker control unit
XR8327
XR8456XR8457
XR8458
XR8206AC
XR8206WH
XR8327DW
Description Pack Cat Qty. Ref.
Double pole cooker control unit45A cooker control unit (size 2) 5 XR8458
Description Pack Cat Qty. Ref.
Double pole control switch with special marking20AX with neon marked "Air Conditioner" 10 XR8206AC
20AX with neon marked "Water Heater" 10 XR8206WH
32A with neon marked "Dish Washer" 10 XR8327DW
• Complies with BS EN 60669-1, a.c. only IEC 60669-1, CB certificate
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 1 X 16.0mm2
E: 1 X 16.0mm2
• Material: polycarbonate
• Complies with BS 4177, a.c. only
• Combined switch / sockets have double pole 45A main switch & 13A switched socket outlet
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 1 X 16.0mm2
E: 1 X 10.0mm2
• Marking on cooker control units: ON, OFF and circuit identification cooker and socket
• Material: Polycarbonate
Special marked units
Special marks Abbreviation"Air Conditioner" - AC"Cooker Hob" - CB"Cooker Hood" - CH"Computer Power" - CP"Dryer" - DR"Dish Washer" - DW"Fridge" - FR"Oven" - OV"Water Heater" - WH"Washing Machine" - WM
Surcharge applies
27
Description Pack Cat Qty. Ref.
Blank plate (size 1) 20 XV8101
Blank plate (size 2) 10 XV8102XV8101
XV8102
Description Pack Cat Qty. Ref.
Communication and data Telephone outlet (BS style master) 10 XT8001
Telephone outlet (BS style slave) 10 XT8002
TV co-axial outlet 10 XT8004
TV & FM outlet 10 XT8005
RJ 45 data outlet (1 mod) Cat 5e 10 XT8007
RJ 45 data outlet (1 mod) Cat 6 10 XT8607
RJ 11 data outlet (1 mod) 10 XT8010
RG 6 cable TV outlet 10 XT8012
2A telephone socket with shutter 10 XT8014
TV + RG 6 connector without spliter 10 XT8017
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Material: Polycarbonate
• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws and screw caps
• Material: Polycarbonate
XT8001XT8002
XT8004
XT8005 XT8007XT8607
XT8010 XT8012
XT8017XT8014
Communication and data
Moulded blank plates
28
13A socket outlets
• Complies with BS 1363 Pt 2, a.c. only SS145
• All terminal screws upward facing for ease of installation
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 2 X 4.0mm2
E: 3 X 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Tough plastic back for durability
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Socket outlets 13A single unswitched 10 XS8113
13A double unswitched (size 2) 5 XS8213
13A single switched 10 XS8114
13A double switched (size 2) 5 XS8214
13A single switched with neon 10 XS8117
13A double switched with neon (size 2) 5 XS8217
XS8113
XS8213
XS8114
XS8214
XS8117
XS8217
Dust preventive sticker
* Socket are with FREE dust preventive sticker to give additional protection during installation* Sockets with Red dolly switch are also available / Surcharge applies
29
• Complies with BS 546 SS472
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 2 x 2.5mm2
E: 3 x 1.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
• Complies with BS 546 SS472
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 2 x 4.0mm2
E: 3 x 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Socket outlets 5A round pin unswitched 10 XS8905
5A round pin switched 10 XS8906
Description Pack Cat Qty. Ref.
Socket outlets 15A round pin unswitched 10 XS8915
15A round pin switched 10 XS8916
German style sockets 16A German style socket (without shutter) 10 XS8413
16A German style socket (with shutter) 10 XS8414
XS8905
XS8906
XS8915
XS8916
XS8413XS8414
15A socket outlets
5A socket outlets
30
10A socket outlets
• Complies with IEC 884-1
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• Capacity of each terminal: L, N: 2 x 4.0mm2
E: 3 x 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
XS8212P
Description Pack Cat Qty. Ref.
Socket outlets
10A 2 pin unswitched universal socket 10 XS8211P
10A 2 pin switched universal socket 10 XS8212P
10A 2 pin unswitched twin universal socket 10 XS8221P
10A 3 pin multi international socket 10 XS8314
XS8211P
XS8221P
XS8314
31
Description Pack Cat Qty. Ref.
Fused connection units 13A fused with flex outlet 10 XR8130
13A switch fused with flex outlet 10 XR8131
13A switch fused with neon and flex outlet 10 XR8137
13A fused with neon and flex outlet 10 XR8138
Description Pack Cat Qty. Ref.
Connection units 25A connection unit with flex outlet 10 XR8250
45A connection unit with flex outlet 10 XR8450
• Complies with BS 1363 Pt 4, a.c. only
• Cable clamp accommodates up to 2.5mm2 flexible cords
• Supplied with M3.5 x 25mm long fixing screws and screw caps
• All switched units are double pole
• Capacity of each terminal: L, N: 3 x 4.0mm2
E: 2 x 4.0mm2
• All units fitted with a 13 Amp fuse link to BS 1362, can be supplied with 2 Amp, 5 Amp fuse link
• Optional flex outlet - for choice of use
• Material: Polycarbonate
XR8130
XR8131
XR8137
XR8138
XR8250
XR8450
Connection units
• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws and screw caps
25A connection unit • Capacity of each terminal: L, N: 2 x 6.0mm2
E: 2 x 6.0mm2
45A connection unit• Capacity of each terminal: L, N: 2 x 6.0mm2
E: 2 x 6.0mm2
• Material: Polycarbonate
Fused connection units
32
Lampholders
Straight BC batten* • Complies with BS EN 61184:1997
Ceiling rose*• Complies with BS 67
• 2 earth terminals
• Feet on base to add mounting on uneven surfaces
XB8001
XB8002
XB8003
Description Pack Cat Qty. Ref.
Lampholders 3 terminal, home office shield BC batten 10 XB8001(pin type)
3 terminal, home office shield BC batten 10 XB8002 (screw type)
Ceiling rose 10 XB8003
33
XB8351
XB8471
XB8472
XB8352
Mounting boxes
Description Pack Cat Qty. Ref.
Mounting box 35mm depth (size 1) 10 XB8351
Mounting box 47mm depth (size 1) 10 XB8471
Mounting box 35mm depth (size 2) 10 XB8352
Mounting box 47mm depth (size 2) 10 XB8472
• Made to BS5733 standard • Colour and size match to hager 8000, 9000, 9088, 10088 series White WA
• Knockouts are provided on the base and sides for cable entry
• With earth terminal
• Material: PVC
34
System 9000
The clip on cover feature ensures all fixing screws are hidden.
Also during renovation, by removing the cover, it is possible to
ensure that no paint or wall paper will look untidy, as this can be
covered by re-fitting the cover when finished. Our changeable
colour clip on cover is today's electrical fashion device and
aims to suit any interior design theme perfectly. We provide
a complete product range to cover all customer requirements,
including sensor movement detectors, which could upgrade
your lighting system, saving energy and cost.
System 9000
Wall switches P.36
Bell switches P.37
Dimmer and fan control switches P.37
20A double pole control switches P.38
32A & 45A double pole control switches P.38
Cooker control unit P.39
Special marked units P.39
Communication and data P.40
Mould blank plates P.41
Shaver socket P.41
13A socket outlets P.42
5A socket outlets P.42
15A and 16A socket outlets P.43
10A socket outlets P.43
Fused connection units P.44
Connection units P.45
Others P.45
35
36
Wall switches
Description Pack Cat Qty. Ref.
Plate switches 10AX 1 gang 1 way 10 XP9110 1 gang 2 way 10 XP9120
2 gang 1 way 10 XP9210
2 gang 2 way 10 XP9220
3 gang 1 way 10 XP9310
3 gang 2 way 10 XP9320
4 gang 1 way 10 XP9410
4 gang 2 way 10 XP9420
4 gang 1 way (size 2) 5 XP9412
6 gang 1 way (size 2) 5 XP9610
6 gang 2 way (size 2) 5 XP9620
8 gang 1 way (size 2) 5 XP9810
8 gang 2 way (size 2) 5 XP9820
intermediate switch 10 XP9001
Plate switches 20AX 1 gang 1 way 10 XP9211
1 gang 2 way 10 XP9212
2 gang 1 way 10 XP9221
2 gang 2 way 10 XP9222
3 gang 1 way 10 XP9231
3 gang 2 way 10 XP9232
4 gang 1 way 10 XP9241 4 gang 2 way 10 XP9242
• Complies with BS EN 60669-1, a.c only IEC 60669-1 CB certificate
• 'X' rated - No need to derate for fluorescent loads
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 1.5mm2
2 x 2.5mm2
• Two way switches can be wired either 1 way or 2 way
• Terminal markings denote: L1 = one way L2 = two way C = common
• Material: Polycarbonate
XP9110/ 9120XP9211/ 9212
XP9210/ 9120XP9221/ 9222
XP9310/ 9320XP9231/ 9232
XP9410/ 9420XP9241/ 9242
XP9610/ 9620
XP9412
XP9810/ 9820
XP9001
37
Description Pack Cat Qty. Ref.
Bell switches single pole 10A Marked bell 10 XP9910
Marked press 10 XP9911
Description Pack Cat Qty. Ref.
Dimmer and fan control switches 500W 2 way switched single dimmer 5 XP9515
500W 2 way switched twin dimmer 5 XP9525
400VA 2 way switched fan control 5 XP9105
• Complies with BS EN 60669-1 IEC 60669-1
• Bell push / press can be wired to make 250V a.c.
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 1.5mm2
2 x 2.5mm2
• Material: Polycarbonate
Dimmer and fan control switches
XP9910
XP9911
XP9515
XP9525
XP9105
• Complies with BS EN 60669-2-1, a.c only IEC 60669-2-1 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 1.5mm2
2 x 2.5mm2
• Frequency: 50 Hz
• Rating 500W max
• For incandescent lamps and max 150W halogen lamps
• Material: Polycarbonate
Bell switches
38
20A double pole control switches
Description Pack Cat Qty. Ref.
Double pole control switches 20AX 10 XR9200
20AX with neon 10 XR9206
20AX with flex outlet 10 XR9201
20AX with neon and flex outlet 10 XR9207
20AX double gang with neon 10 XR9222
Description Pack Cat Qty. Ref.
Double pole control switches 32A with neon 10 XR9327
45A with neon 10 XR9457
45A double pole cooker control unit on (size 2) 10 XR9456
32A and 45A double pole control switches
• Complies with BS EN 60669-1, a.c. only IEC 60669-1 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 x 6.0mm2
E: 2 x 4.0mm2
• Optional flex outlet - for choice of use
• Material: Polycarbonate
• Complies with BS EN 60669-1, a.c. only IEC 606691 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 1 x 16.0mm2
E: 2 x 16.0mm2
• Material: Polycarbonate
XR9200 XR9206
XR9201 XR9207
XR9222
XR9327
XR9457 XR9456
39
Cooker control unit
Description Pack Cat Qty. Ref.
Double pole cooker control unit45A cooker control unit (size 2) 5 XR9458
Description Pack Cat Qty. Ref.
Double pole control switch with special marking20AX with neon marked "Water Heater" 10 XR9206WH
20AX with flex outlet marked "Air Conditioner" 10 XR9201AC
20AX with neon and flex outlet 10 XR9207ACmarked "Air Conditioner"
20AX with neon and flex outlet 10 XR9207WHmarked "Water Heater"
32A with neon marked "Air Conditioner" 10 XR9327AC
• Complies with BS 4177, a.c. only
• Combined switch / sockets have double pole 45A main switch and 13A switched socket outlet
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 1 x 16mm2
E: 1 x 10mm2
• Marking on cooker control units: ON, OFF and circuit identification cooker and socket
• Material: Polycarbonate
XR9458
XR9206WH
XR9201AC
XR9207AC
XR9207WH
XR9327AC
Special marked units
Special marks Abbreviation"Air Conditioner" - AC"Cooker Hob" - CB"Cooker Hood" - CH"Computer Power" - CP"Dryer" - DR"Dish Washer" - DW"Fridge" - FR"Oven" - OV"Water Heater" - WH"Washing Machine" - WM
Surcharge applies
40
Communication and data
Description Pack Cat Qty. Ref.
Communication and dataTelephone outlet (BS style master) 10 XT9001
Telephone outlet (BS style slave) 10 XT9002
FM co-axial outlet 10 XT9003
TV co-axial outlet 10 XT9004
TV & FM connector 10 XT9005
TV / FM splitter isolator SCV outlet (size 2) 10 XT9025 (blank plate only)
TV / FM outlet with splitter 10 XT9006
RJ45 data outlet (1 mod) Cat 5e 10 XT9007
RJ45 data outlet (2 mod) Cat 5e 10 XT9008
RJ45 data outlet (1 mod) cat 6 10 XT9607
RJ45 data outlet (2 mod) cat 6 10 XT9608
RJ11 + RJ45 data outlet 10 XT9009
RJ11 data outlet (1 mod) 10 XT9010
RJ11 data outlet (2 mod) 10 XT9011
RG6 cable TV outlet 10 XT9012
Branching terminal 5-pair tel. terminal 10 XT9013
2A telephone socket with shutter 10 XT9014
TV/ FM outlet 10 XT9015
TV/ FM outlet slave 10 XT9016
TV/ RG6 connector without splitter 10 XT9017
• Supplied with M3.5 x 25mm long fixing screws
• Material: Polycarbonate
XT9001 XT9002
XT9003 XT9004
XT9005 XT9006
XT9007XT9607
XT9008XT9608
XT9009 XT9010
XT9011 XT9012
XT9014 XT9015
XT9016 XT9017
XT9025
XT9013
41
Moulded blank plates
Description Pack Cat Qty. Ref.
Blank plates Blank plate (size 1) 20 XV9101
Blank plate (size 2) 10 XV9102
Description Pack Cat Qty. Ref.
Shaver socket 115V / 230V [20VA] (size 2) 1 XS9200
Shaver socket
• Complies with BS EN 61558-2-5 IEC 61558-2-5 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Designed for use in bathrooms and washrooms and incorporates a double wound isolating transformer for an earth free supply. Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets rating 20VA on either voltage
• Capacity of each terminal: 2 x 2.5mm2
• Primary circuit is protected by a self-resetting thermal overload device. Insertion of shaver plug automatically switches on the transformer, removal automatically switches it off. A positive interlock prevents 2 plugs being inserted simultaneously
• Material: Polycarbonate
XS9200
XV9101
XV9102
• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws
• Material: Polycarbonate
42
13A socket outlets
Description Pack Cat Qty. Ref.
Socket outlets 13A single unswitched 10 XS9113
13A double unswitched (size 2) 5 XS9213
13A single switched 10 XS9114F
13A double switched (size 2) 5 XS9214F
13A single switched with neon 10 XS9117
13A double switched with neon (size 2) 5 XS9217
• Complies with BS 1363 Pt 2, a.c. only SS145
• All terminal screws upward facing for ease of installation
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 x 4.0mm2
E: 3 x 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Tough plastic back for durability
• Material: Polycarbonate
XS9113
XS9213
XS9114F
XS9214F
XS9117
XS9217
• Complies with BS 546 SS472
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 X 2.5mm2
E: 3 X 1.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
5A socket outlets
Description Pack Cat Qty. Ref.
Socket outlets 5A round pin unswitched 10 XS9905
5A round pin switched 10 XS9906XS9905 XS9906
* Socket are with FREE dust preventive sticker to give additional protection during installation
Dust preventive sticker
43
15A and 16A socket outlets
Description Pack Cat Qty. Ref.
Socket outlets 15A round pin unswitched 10 XS9915
15A round pin switched 10 XS9916
German style sockets 16A German style socket (without shutter) 10 XS9413
16A German style socket (with shutter) 10 XS9414
• Complies with BS 546 SS472
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 X 4.0mm2
E: 3 X 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
XS9915 XS9916
XS9413XS9414
• Complies with IEC 884-1
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 X 4.0mm2
E: 3 X 2.5mm2
• Integral rocker design of switched sockets provide clear red 'on' indication
• Material: Polycarbonate
Description Pack Cat Qty. Ref.
Socket outlets 10A 2 pin unswitched universal socket 10 XS9211P
10A 2 pin switched universal socket 10 XS9212P
10A 2 pin unswitched twin universal socket 10 XS9221P
10A socket outlets
XS9211P
XS9212P
XS9221P
44
Fused connection units
• Complies with BS 1363 Pt 4, a.c. only
• Cable clamp accommodates up to 2.5mm2 flexible cord
• Supplied with M3.5 x 25mm long fixing screws
• All switched units are double pole
• Capacity of each terminal: L, N: 3 X 4.0mm2 E: 2 X 4.0mm2
• All units fitted with a 13A fuse link to BS 1362, can be supplied with 2A, 5A fuse link.
• Material: polycarbonate
• Optional flex outlet - for choice of use
Description Pack Cat Qty. Ref.
Fused connection units13A fused with flex outlet 10 XR9130
13A switch fused with flex outlet 10 XR9131
13A switch fused with neon and flex outlet 10 XR9137
13A fused with neon and flex outlet 10 XR9138
XR9130
XR9131
XR9137
XR9138
45
XC 9001
XC 9002
Connection units
Description Pack Cat Qty. Ref.
Door chime • complies with BSEN 60335-1, IEC 60669-1 10 XD9001• 250V AC or 4.5V DC (AAA x 3) • frequency 50 Hz • with adjustable melody / ding dong sound • supplied with M3.5 x 25mm long fixing screws
WA covers WA Cover for switch 10 XC9001
WA Cover for socket 10 XC9002
XD 9001
Description Pack Cat Qty. Ref.
Connection units 25A connection unit with flex outlet 10 XR9250
45A connection unit with flex outlet 10 XR9450
XR9250
XR9450
• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws
25A connection unit • Capacity of each terminal: L, N: 2 x 6.0mm2
E: 2 x 6.0mm2
45A connection unit• Capacity of each terminal: L, N: 2 x 6.0mm2
E: 2 x 6.0mm2
• Material: Polycarbonate
Others
46
System 9088
System 9088
Wall switches P.48
Bell switches P.49
Dimmer switches P.49
Double pole control switches P.50
Special marked units P.50
Hotel ranges P.51
The large concave rocker switch feature provides a subtle feel
when switching. The product is available in a full range of colours
and finishes, which ensures the compatibility of the switches with
the interior design. The changeable clip on cover enables you to
mix and match to create your own product character.
The unique "Blue Mechanism" represents Hager's Professional
products in order to ensure quality and safety. System 9088* has
obtained the British certificate under the International Third Party
Laboratory Nemko UK.
47
48
Wall switches
Description Pack Cat
Qty. Ref.
Large dolly switches 10AX1 gang 1 way, large dolly 10 XL9110
1 gang 2 way, large dolly 10 XL9120
1 gang Intermediate large dolly 10 XL9001
2 gang 1 way, large dolly 10 XL9210
2 gang 2 way, large dolly 10 XL9220
3 gang 1 way, large dolly 10 XL9310
3 gang 2 way, large dolly 10 XL9320
4 gang 1 way, large dolly (size 2) 10 XL9410
4 gang 2 way, large dolly (size 2) 10 XL9420
Large dolly switches with neon 10AX 1 gang 1 way, large dolly with neon 10 XL9117
1 gang 2 way, large dolly with neon 10 XL9127
2 gang 1 way, large dolly with neon 10 XL9217
2 gang 2 way, large dolly with neon 10 XL9227
3 gang 1 way, large dolly with neon 10 XL9317
3 gang 2 way, large dolly with neon 10 XL9327
Large dolly switches 20AX1 gang 1 way, large dolly 10 XL9211
1 gang 2 way, large dolly 10 XL9212
2 gang 1 way, large dolly 10 XL9221-2
2 gang 2 way, large dolly 10 XL9222-2
3 gang 1 way, large dolly 10 XL9231
3 gang 2 way, large dolly 10 XL9232
4 gang 1 way, large dolly (size 2) 10 XL9241
4 gang 2 way, large dolly (size 2) 10 XL9242
• Complies with BS EN 60669-1, a.c only IEC 60669-1 CB certificate
• 'X' rated - No need to derate for fluorescent loads
• Supplied with M3.5 x 25mm long fixing screws
• Switches with neon for illuminated identification in the dark enviroment
• Capacity of each terminal: 3 x 1.5mm2
2 X 2.5mm2
•Two way switches can be wired either 1 way or 2 way
• Terminal markings denote: L1 = one way L2 = two way C = common
• Material: Polycarbonate
XL9110/ 9120
XL9001
XL9210/ 9220
XL9310/ 9320
XL9410/ 9420
XL9117/ 9127 XL9217/ 9227
XL9317/ 9327
XL9211XL9212
XL9221-2XL9222-2
XL9231XL9232
XL9241XL9242
49
Bell switches
Description Pack Cat Qty. Ref.
Bell switches single pole 10AMarked bell large dolly 10 XL9910
Marked press large dolly 10 XL9911
Without marking large dolly 10 XL9911NM
• Complies with BS EN 60669-1
• Bell push / press can be wired to make 250V a.c.
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 1.5mm2
2 X 2.5mm2
• Material: Polycarbonate
XL9910 XL9911
XL9911NM
• Complies with BS EN 60669-2-1 IEC 60669-2-1 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 1.5mm2 conductors
• For incandescent lamps only
• Material: Polycarbonate
XL9515 XL9525
Description Pack Cat Qty. Ref. Dimmer switches600W 1 gang, large dolly 10 XL9515dimming switch with neon (cycle action)
400W 2 gang, large dolly 10 XL9525dimming switch with neon (cycle action)
Dimmer switches
50
Double pole control switches
Description Pack Cat Qty. Ref.
Double pole control switches with special marking
20AX 1 gang, large dolly with neon 10 XL9206WH
marked "Water Heater"
20AX 2 gang, large dolly with neon 10 XL9222WM
marked "Washing Machine"
XL9206WH
XL9222WM
Special marks Abbreviation
"Air Conditioner" - AC
"Cooker Hob" - CB
"Cooker Hood" - CH
"Computer Power" - CP
"Dryer" - DR
"Dish Washer" - DW
"Fridge" - FR
"Oven" - OV
"Water Heater" - WH
"Washing Machine" - WM
Surcharge applies
Special marked units
Description Pack Cat Qty. Ref.
Double pole control switches
20AX 1 gang, large dolly 10 XL9200
20AX 2 gang, large dolly 10 XL9221
20AX 1 gang, large dolly with neon 10 XL9206
20AX 2 gang, large dolly with neon 10 XL9222
• Complies with BS EN 60669-1, a.c. only IEC 606691 CB certificate
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 1 x 16.0mm2
E: 2 x 16.0mm2
• Material: Polycarbonate
XL9200
XL9206 XL9222
XL9221
51
Hotel ranges
Description Pack Cat Qty. Ref. Hotel rangeKey tag switch with key card (time delay 60s) 5 XH9001
Key card only 5 XH9001CARD
"DND" & "Please clean up" switches with (RED) neon 10 XH9002
"DND" & "Please clean up" indication box with door bell switch 10 XH9003XH9003XH9002
XH9001CARDXH9001
• Complies with BSEN 60669-1 • Supplied with M3.5 x 25mm long fixing screws
• Material: Polycarbonate
Stainless Steel series incorporates double pole switched sockets, fused connection units, communication, connection unit, blank plates.
Brushed Chrome finishing of this range provides stylish appearance to complement
any setting, whether in the office, hotel or at home. The products are highly
scratch resistant with an epoxy lacquer finish, the products will maintain their
appearance for many years.
The unique “Blue Mechanism” represents Hager’s Professional products and in
order to ensure quality and safety. Stainless Steel series* has obtained the British
certificate under the International Third Party Laboratory PSB Corporation.
Stainless steel
52
53
Stainless steel
Wall switches P.54
Bell switches P.54
Dimmer switches P.55
20A double pole control switches P.55
32 & 45A double pole control switches P.55
Communication & data P.56
Moulded blank plates P.56
13A socket outlets P.57
15A socket outlets P.58
Fused connection units P.58
Connection units P.59
54
• Complies with BS EN 60669-1, a.c only SS227 MS616
• 'X' rated - No need to derate for fluorescent loads
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 2 x 2.5mm2 conductors
• Two way switches can be wired either 1 way or 2 way
• Terminal markings denote: L1 = one way L2 = two way
XP120SS
XP001SS
XP220SS
XP320SS
XP910SS
Description Pack Cat Qty. Ref.
Bell switch single pole 10ABell switch 10 XP910SS
• Complies with BS EN 60669-1 SS227 MS616
• Supplied with M3.5 x 25mm long fixing screws
• Bell push / press can be zwired to make 250V a.c.
Description Pack Cat Qty. Ref.
Plate switches 10AX1 gang 2 way 10 XP120SS
2 gang 2 way 10 XP220SS
3 gang 2 way 10 XP320SS
4 gang 2 way (size 2) 5 XP420SS
1 gang intermediate switch 10 XP001SS
XP420SS
Bell switch
Wall switches
55
XP215SS
Description Pack Cat Qty. Ref.
Dimmer switch 40-400W 1 way un-switched dimmer 10 XP215SS
• Complies with BS EN 60669-2-1, a.c only IEC 60669-2-1 CB certificate SS227 MS616
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 1.5mm2 conductors
• Frequency 50/60Hz
• Rating 400W max
20A double pole control switch
32A and 45A double pole control switches
XR206SS
XR327SS
XR457SS
• Complies with BS EN 60669-1, a.c. only SS227 MS616
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 2.5mm2 conductor
• Complies with BS EN 60669-1, a.c. only SS227 MS616
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 1 x 16mm2 conductor 1 x 10mm2 earth conductor
Description Pack Cat Qty. Ref.
Double pole control switch 20A with neon 10 XR206SS
Description Pack Cat Qty. Ref.
Double pole control switches 32A with neon 10 XR327SS
45A with neon 10 XR457SS
Dimmer switch
56
• Supplied with M3.5 x 25mm long fixing screws
Description Pack Cat Qty. Ref.
Blank plate (size 1) 20 XV102SS
Blank plate (size 2) 10 XV202SS
XV202SS
XV102SS
Blank plates
Communication and data
Description Pack Cat Qty. Ref.
Communication and data RJ 45 data outlet (1 mod) 10 XT007SS
RJ 45 data outlet (2 mod) 10 XT008SS
RJ 11 data outlet (1 mod) 10 XT010SS
XT007SS
XT008SS
XT010SS
• Supplied with M3.5 x 25mm long fixing screws
57
• Complies with BS 1363 Pt 2, a.c. only SS145 MS589
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 4 x 2.5mm2 conductors switched; 4 x 2.5mm2 unswitched
• Tough plastic back for durability
• Double pole switching mechanism
Description Pack Cat Qty. Ref.
Socket outlets 13A single unswitched 10 XS113SS
13A double unswitched (size 2) 5 XS213SS
13A single switched 10 XS114SS
13A double switched (size 2) 5 XS214SS
13A single switched with neon 10 XS115SS
13A double switched with neon (size 2) 5 XS215SS
XS114SS
XS115SS
XS113SS
XS214SS
XS215SS
XS213SS
13A socket outlets
58
Fused connection units
• Complies with BS 1363 Pt 4, a.c. only SS403 MS589
• All switched units are double pole
• Supplied with M3.5 x 25mm long fixing screws
• Cable clamp accommodates up to 2.5mm2 flexible cord
• Capacity of each terminal: switched; 4 x 2.5mm2 unswitched; 4 x 2.5mm2 conductors
• All units fitted with a 13 Amp fuse link to BS 1362, can be supplied with 2 Amp, 5 Amp fuse link
• Optional flex outlet - for choice of use
Description Pack Cat Qty. Ref.
Fused connection units13A fused with flex outlet 10 XR130SS
13A double pole switch fused with flex outlet 10 XR131SS
13A double pole switch fused with neon 10 XR134SS
13A double pole switch fused with neon and flex outlet 10 XR137SS
13A fused with neon and flex outlet 10 XR138SS
XR130SS
XR134SS
XR138SS
XR137SS
XR131SS
15A socket outlets
Description Pack Cat Qty. Ref.
Socket outlets 15A round pin switched 10 XS916SS
15A round pin switched with neon 10 XS917SS
XS916SS XS917SS
• Complies with BS 546 SS472 MS589
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: 3 x 2.5mm2 conductors 3 x 2.5mm2 earth conductors
59
Description Pack Cat Qty. Ref.
Connection unit 25A connection unit with flex outlet 10 XR250SS
XR250SS
• Complies with BS573 SS241
• Supplied with M3.5 x 25mm long fixing screws
• Capacity of each terminal: L, N: 2 x 6.0mm2
E: 2 x 6.0mm2
Connection unit
Metal Clad series incorporates double
pole switched sockets, fused connection
units, connection unit, blank plates.
The hard-wearing range of Metal Clad accessories
is designed to withstand the toughest conditions
and heaviest knocks, particularly in industrial
installations. The front plate is coated with a two
layer tough paint finish and will maintain its good
looks through years of hard labour.
Metal Clad series* has obtained the British
certificate under the International Third Party
Laboratory PSB Corporation.
Metal clad
60
61
Metal Clad
Wall switches P.62
20A double pole control switches P.62
32A and 45A double pole control switches P.62
13A socket outlets P.63
15A socket outlets P.63
Fused connection units P.63
62
• Complies with BS EN 60669-1 a.c. only SS227 MS616
• 'X' rated - No need to derated for fluorescent loads
• Supplied with M3.5 x 14mm long fixing screws
• 1, 2, 3 and 4 gang units supplied with a two knockout matching surface box
• Capacity of each terminal: 2 x 2.5mm2 conductors 5 x 1.5mm2 earth terminal (box) • Other switches are available without mounting boxes on request
• Knockouts accept 20mm diameter conduit
• Earth terminal supplied with each box
XP120MC XP220MC
XP320MC XP420MC
Description Pack Cat Qty. Ref.
Single pole plate switches 10AX1 gang 2 way 10 XP120MC
2 gang 2 way 10 XP220MC
3 gang 2 way 10 XP320MC
4 gang 2 way 5 XP420MC
Wall switches
XR206MC
XR457MC
• Complies with BS EN 60669-1, a.c. only SS227 MS61
• Supplied with M3.5 x 14mm long fixing screws
• Capacity of each terminal: 3 x 2.5mm2 conductor
32A and 45A double pole control switches
• Complies with BS EN 60669-1, a.c. only SS227 MS616
• Supplied with M3.5 x 14mm long fixing screws
• Capacity of each terminal: 1 x 16mm2 conductor 1 x 10mm2 earth conductor
Description Pack Cat Qty. Ref.
Double pole control switches 45A with neon 10 XR457MC
Description Pack Cat Qty. Ref.
Double pole control switches 20A with neon 10 XR206MC
20A double pole control switches
63
13A socket outlets
XS115MC
XS916MC
XS214MC
XS215MC
15A socket outlets
• Complies with BS 546 SS472 MS589
• Supplied with M3.5 x 14mm long fixing screws
• Capacity of each terminal: 3 x 2.5mm2 conductors 3 x 2.5mm2 earth conductors
• Complies with BS 1363 Pt 2, a.c. only SS145 MS589
• Supplied with M3.5 x 14mm long fixing screws
• All terminal screws upward facing for ease of installation
• Capacity of each terminal: 4 x 2.5mm2
• Tough plastic back for durability
Description Pack Cat Qty. Ref.
Socket outlets 15A round pin switched 10 XS916MC
Description Pack Cat Qty. Ref.
Socket outlets 13A single switched 10 XS114MC
13A double switched (size 2) 5 XS214MC
13A single switched with neon 10 XS115MC
13A double switched with neon (size 2) 5 XS215MC
XS114MC
• Complies with BS 1363 Pt 4, a.c. only SS403 MS589
• All switched units are double pole
• Supplied with M3.5 x 14mm long fixing screws
• Cable clamp accommodates up to 2.5mm2 flexible cord
• Capacity of each terminal: 4 x 2.5mm2
• All units fitted with a 13 Amp fuse link to BS 1362, can be supplied with 2 Amp, 5 Amp fuse link
• Optional flex outlet - for choice of use -
Description Pack Cat Qty. Ref.
Fused connection units13A double pole switch fused with neon 10 XR134MC
13A double pole switch fused with neon and flex outlet 10 XR137MCXR134MC XR137MC
Fused connection units
64
Floor mounting RCD socket IP55 IP66 IP66 isolator Doorbellsocket
65
Floor mounting RCD socket IP55 IP66 IP66 isolator Doorbellsocket
IP55/66 rangeIP55 Switches P. 66
IP55 Special Function Switches P. 66
IP55 Sockets P. 67
IP66 Sockets P. 68
IP66 isolator P. 68
Independent function itemsRCD socket P. 70
Doorbell P. 70
Floor mounting socket P. 71
66
IP55 Switches
Description Conduit Pack Cat. Entries Qty. Ref.
IP55 switches 10AX Inductive load rated1 gang 1 way 4 x 20 mm 1 XPW5110
1 gang 2 way 4 x 20 mm 1 XPW5120
2 gang 1 way 4 x 20 mm 1 XPW5210
2 gang 2 way 4 x 20 mm 1 XPW5220
3 gang 2 way 4 x 20 mm 1 XPW5320
IP55 Special Function Switches
IP55 Switches
IP55Available in 1, 2 & 3 gang
Complies withBS EN 60529 IP testBS EN 60669-1
Features • Clear Silicon gasket allows operation of switch without lifting cover.
• Clear Silicon gasket is replaceable.
• Large switch rocker allows easy operation.
• Mounting screws locations segregated from the back box by gaskets for improved IP installations.
• 20 mm Conduit entries available on all sides.
• IP rated cable gland included
Technical data • IP55
• 250V 10AX rated (suitable for fluorescent loads)
• 1 way & 2 way models
• Terminals capable of taking 3 x 1.5 mm2 or 2 x 2.5 mm2 cables.
• Earth Terminal mounted in back box.
Description Conduit Pack Cat. Entries Qty. Ref.
IP55 switches 20AX Double pole1 gang 1 way double pole 4 x 20 mm 1 XRW5200
IP55 switches 10AX Bell Press1 gang 1 way bell press 4 x 20 mm 1 XPW5910
XPW5110 XPW5120
XPW5210XPW5220
XPW5320
XPW5910
XRW5200
67
IP55 Sockets
IP55 Sockets
Single & Twin Switched and Un-switched sockets outlets.
Complies withBS EN 60529 IP testBS 1363 Socket outletsSS145MS589
Features • Clear silicon gasket allows visual identification of switch position without lifting cover.
• Clear silicon gasket is replaceable.
• Mounting screws locations segregated from the back box by gaskets for improved IP installations.
• 20 mm Conduit entries available on all sides.
• IP rated cable gland included
Technical data • IP55
• 250V 13A
• Terminals capable of taking 3 x 2.5 mm2 or 2 x 4 mm2 cables.
• Earth Terminal mounted in back box.
Description Conduit Pack Cat. Entries Qty. Ref.
IP55 Un-switched sockets Single socket un-switched 13A 4 x 20 mm 1 XSW5113
Double socket un-switched 13A 8 x 20 mm 1 XSW5213
IP55 Switched sockets Single socket switched 13A 4 x 20 mm 1 XSW5114
Double socket switched 13A 8 x 20 mm 1 XSW521
XSW5113
XSW5114
XSW5213
XSW5214
68
IP66 Sockets
IP66 SocketsSingle Un-switched
Twin Switched & Un-switched
Fuse Connection UnitsBS1363: Part 4 1995 Connection Units
Complies withBS EN 60529 IP testBS 1363 Socket outlets
Features • Soft GEL cable seals to maintain IP66 when plug is inserted.
• Mounting screws locations segregated from the back box by gaskets for improved IP installations.
• 20 mm conduit entries available on all sides.
• IP rated cable gland included
Technical data • IP66
• 250V 13A• Terminals capable of taking 3 x 2.5 mm2 or 2 x 4 mm2 cables.
• Earth terminal mounted in back box.
Description Conduit Pack Cat. Entries Qty. Ref.
IP66 Un-switched sockets Single socket un-switched 13A 4 x 20 mm 1 XSW6113
Double socket un-switched 13A 8 x 20 mm 1 XSW6213
IP 66 Switched sockets Double socket switched 13A 8 x 20 mm 1 XSW6214
IP66 Spur units 13A Fused spur with flex outlet 4 x 20 mm 1 XRW6130
Fused spur with switch 4 x 20 mm 1 XRW6131
XSW6113
XSW6213
XSW6214
XRW6130
XRW6131
69
IP66 isolator
Description Pack Cat Qty. Ref. Rating: AC 22A
2 pole
20A 2 pole IP66 utility isolator 1 JG220U 32A 2 pole IP66 utility isolator 1 JG232U
40A 2 pole IP66 utility isolator 1 JG240U
63A 2 pole IP66 utility isolator 1 JG263U
3 pole
20A 2 pole IP66 utility isolator 1 JG320U 32A 2 pole IP66 utility isolator 1 JG332U 40A 2 pole IP66 utility isolator 1 JG340U
3 pole + switched neutral
20A 2 pole IP66 utility isolator 1 JG420U 32A 2 pole IP66 utility isolator 1 JG432U
40A 2 pole IP66 utility isolator 1 JG440U
63A 2 pole IP66 utility isolator 1 JG463U
Rating: AC23A2 pole
20A 2 pole IP66 isolator 1 JG220I 32A 2 pole IP66 isolator 1 JG232I 40A 2 pole IP66 isolator 1 JG240I
63A 2 pole IP66 isolator 1 JG263I
3 pole 20A 2 pole IP66 isolator 1 JG320I
32A 2 pole IP66 isolator 1 JG332I
40A 2 pole IP66 isolator 1 JG340I
3 pole + switched neutral
20A 2 pole IP66 isolator 1 JG420I
32A 2 pole IP66 isolator 1 JG432I
40A 2 pole IP66 isolator 1 JG440I
63A 2 pole IP66 isolator 1 JG463I
Description:The range of IP66 isolators are designed to be used in outdoor applications with IP66 degree of protection. They are rated at AC22A and AC23A offer options of 2, 3 poles and 4 poles with switched neutral. They are compact and easy to install with 2 screw quick release top cover
Electrical specification:Tested and complies with BSEN 60947-3.
Rated voltage: 250V ~ AC 440V ~ AC
Rating AC22A is for switching of mixed resistive and inductive loads, including moderate overloads.
Rating AC23A is for switching of motor loads or other highly inductive loads.
Mechanical specification:Protection Category: IP66
Material: Polycarbonate – UV grade.
Devices & accessories:DP 20-40ATP & N 20-40A
TP & SW N 20-63A
70
Description Pack Cat Qty. Ref.
Doorbells 220-240V AC 50Hz 1 XC001
4 X 1.5V R14C batteries 1 XC002
XC001
XC002
• Complies with BS EN 61558-1:1998 BS EN 61558-2-8:1999
XC001Dimension:105mm (w) x 168mm (h) x 45mm (d)
Power source: 220-240V AC 50Hz
XC002Dimension:105mm (w) x 168mm (h) x 45mm (d)
Power source: 4 x 1.5V R14C batteries
• Complies with BS7288:1990
• Voltage: 220/240 ac 50Hz
• Rated trip current: 30mA
• RCD section: double pole: breaking capacity 250A on earth fault
• Through fault withstand current: 1500A
• Tripping: less than 40mS at 150mA
Description Pack Cat Qty. Ref.
RCD sockets1 gang latching 10 XS114RCD
2 gang latching 10 XS214RCD
XS114RCD
XS214RCD
RCD Socket
Doorbell
71
Floor mounting socket
Description Pack Cat Qty. Ref.
Floor mounting socket1 gang 13A single floor mounting socket 10 XS113FM
2 gang 13A twin floor mounting socket 5 XS213FM
XS113FM
XS213FM
Floor mounting socketSingle and Twin un-switched sockets outlets
Complies with BS1363 Socket outletsMS589SS145
Technical data• 250V 13A
• Single and Twin
• Terminals capable of taking: 3 x 2.5 mm2 or 2 x 4 mm2 cables
72
Hager products are designed and
manufactured to the relevant IEC
standards and the high level of
quality is made possible by the
use of advanced equipment and
a quality assurance system man-
aged by a team of highly qualified
men and women.
Technical information
73
Product standard page 74 - 76
CE marking page 77
Ingress Protection page 78
Circuit diagram page 79 - 84
IP product - dimension page 85
IP65 / 66 isolatior page 86
Index page 87 - 88
74
Product standards
Compliance with standards
Regulation 511-01-01 of BS 7671 : Requirements for Electrical
Installations, IEE Wiring Regulations Sixteenth Edition is of particular
importance to specifiers and installers with respect to product stan-
dards.
Regulation 511-01-01 requires every item of equipment to comply
with the relevant requirements of the applicable British Standard, or
Harmonised Standard appropriate to the intended use of the equip-
ment.
British Standards (BS)
The BSI (British Standards Institution) was the first national
standards body in the world. There are now more than 100 simi-
lar organisations which belong to the International Organisation
for Standardisation (ISO) and the International Electrotechnical
Commission (IEC).
British Standards are drawn up by all those who have a particular
interest in the subject i.e. manufacturers, users, research
organisations, government departments and consumers. This work
is co-ordinated by BSI staff, acting as secretaries to the
committees where the work is done. All standards are made
available for public comment before they are published.
Harmonised standards
A Harmonised standard is a European standard formally presented
by CENELEC, to the European Commission and published in the
commission’s official journal. CENELEC is the Comite European
de Normalisation Electrotechnique i.e. European Committee for
Electrotechnical Standardisation.
BS 7671 part 2 defines a harmonised standard as a standard which
has been drawn up by common agreement between national stan-
dards bodies notified to the European Commission by all member
states and published under national procedures. The UK national
standards body is the British Standards Institution. In the UK a har-
monised standard will normally be published as a British Standard
European Norm i.e. BS EN.
British Standard European Norm (BS EN)
CENELEC European standards are pre-fixed EN (European Norm).
Adoption of the European Standard within the EC is mandatory
and member countries of CENELEC are obliged to publish them
unchanged. In the UK such standards are further endorsed with
the additional prefix ‘BS’, for example BS EN 60669-1 : 1996 is the
British Standard European Norm for Switches for household and
similar fixed electrical installations.
Whilst a European Standard can be a direct replica of an IEC
standard, discussions within CENELEC may result in the
formulation of a standard which includes commonly agreed
variations and Special National Conditions.
International Electrotechnical Commission (IEC)
Founded in 1906 the International Electrotechnical Commission (IEC)
is the world organisation that prepares and publishes
international standards for all electrical, electronic and related
technologies. The membership consists of 60 participating
countries, including all the worlds major trading nations and a grow-
ing number of industrialising countries.
Foreign national standards based on IEC standards are permitted
to be used by BS 7671. However the specifier must verify that any
differences between the foreign standard and the corresponding
British Standard or Harmonised Standard does not result in any
lesser degree of safety than that afforded by compliance with the
British Standard. This assessment would probably need to be made
by specialists.
Conclusion
BS 7671 (IEE Wiring Regulations) recognises equipment which com-
plies with a British Standard or Harmonised Standard
appropriate to the intended use of the equipment without the need
for further qualification.
Hager products have always been designed and
manufactured to a high standard to ensure compliance with the cur-
rent British or Harmonised Standard. See the table below for further
information.Modiam in utetuero commolumsan vullamet nonulput
luptat nim ipit nit nit irit, voloreet velit, quam do estrud modoles
equatet veliscilit in ulputpat. Dui tatisse quisi.
75
Product description BS number Description
Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations
Indicators BS 5733 : 1995 General requirements for Electrical Accessories
Fused connection unit, cord outlets BS 5733 : 1995 Switches for household and similar fixed electrical installations
with particular requirements for timedelay switches (TDS)
Dimmers BS EN 60669-2-3: 2006 Switches for household and similar fixed electrical installations
with particular requirements for timedelay switches (TDS)
Frames and plates BS 5733 : 1995 Switches for household and similar fixed electrical installations
with particular requirements for timedelay switches (TDS)
Boxes BS 4662 : 1980 or Specification for boxes for the enclosure of electrical accessories
BS 5733 : 1995
Product standards
76
Product standards
Product description BS number Description
10 Amp Wall switch BS EN 60669-1: 2000 Switches for household and similar fixed electrical installations
IEC 60669-1 Ed.3.2b:2007
CB certificate
Dimmer switches BS EN 60669-2-1: 2004 Electronic variable control switches (dimmer switches) for tungsten
IEC 60669-2-1 Ed.4.0b: 2002 filament lighting
CB certificate
13 Amp Socket Outlets BS 1363 : Part 2 : 1995 13A plugs, socket-outlets, adaptors and connection units
15 Amp Switched Socket BS 546 : 1950 (1988) Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-
outlet adaptors
20 Amp D.P. Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations
IEC 60669-1 Ed.3.2b: 2007
13 Amp Fused Connection Unit BS 1363 : Part 4 : 1995 Specification for 13A fused connection units switched and unswitched
45 Amp D.P. Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations
BS 3676 : 1 : 2000
45 Amp Cooker Control Unit BS 4177 : 1992 Cooker control units
IEC 60669-1
CB certificate
Shaver Socket Outlet BS EN 61558-2-5: 1998 General Requirements Isolating transformers and safety isolating
transformers
IEC 61558-2-5: 1997 Electromagnetic compatibility, immunity requirements for household
CB certificate appliances tools and similar apparatus.
25 Amp/ Amp Flex Outlet Plate BS 5733: 1995 General Requirements for Electrical Accessories
BS Batten BS EN 61184:1997 Home office shield are T2 rated
Ceiling rose BS 67
77
CE marking
Objective of CE marking.
CE marking is a “technical passport” which indicates that a
product conforms to all relevant directives which require CE
marking, thus enabling the product to travel within the E.U.
A directive is a piece of mandatory European Legislation
implemented by regulations in all member countries. Its purpose is
to allow free movement of goods that are safe and fit for use into
and within the European Union.
CE marking is not a quality mark and it does not indicate that any
testing or certification has been carried out.
The marking.
CE marking is a statement by the manufacturer that the product
complies with the essential requirements of all relevant Directives,
notably in the area of technical safety and conformity assessment.
CE marking can appear on the product or packaging or
documentation or combination thereof dependant upon which
directive it has to comply with.
CE marking is a very specific graphical symbol and must be clearly
separated from other marks.
Directives.
It is the responsibility of the manufacturer or his authorised
representative who places the product onto the EC market to decide
which Directive(s) apply and to ensure the CE marking is affixed by
the dates stated in the relevant directive(s)
For the majority of Hager products only one directive is applicable
this is referred to as the Low Voltage Directive. Where some
products incorporate electronic devices the Low voltage Directive
and the Electromagnetic Compatibility Directive are applicable.
The Low Voltage Directive.
EC directives are requirements adopted by the European Council and
published in the Official Journal of the European Communities and
are addressed to the member states.
European Council Directive 73/23/EEC with an amendment 93/68/
EEC is known as the Low Voltage Directive.
The Low Voltage Directive has been implemented into UK law by the
“ Electrical Equipment (Safety) Regulations 1994” and apply to all
electrical / electronic equipment operating at a voltage of
50-1000 V a.c. or 75-1500 V d.c.. They do not apply to plugs,
socket outlets and adapters which are covered by the Plugs and
Sockets (Safety) Regulations 1994.
Relationship between the Electrical Equipment (Safety)
Regulations, Harmonised standards and the IEE Wiring
Regulations Sixteenth Edition.
The Electrical Equipment (Safety) Regulations requires electrical
equipment to be safe. Electrical equipment which satisfies the safety
provisions of Harmonised standards shall be taken to comply with
this requirement, unless there are reasonable grounds for suspecting
that the equipment does not so comply.
Regulation 511-01-01 of BS 7671 Requirements for Electrical
Installations, IEE Wiring Regulations Sixteenth Edition requires every
item of equipment to comply with the relevant requirements of the
applicable British Standard, or Harmonised Standard appropriate to
the intended use of the equipment.
78
Ingress protection
IP Test Short Definition Description0 Non - protected No special protection
1 Protected against A large surface of solid objects the body, such as a greater than hand (but no protection ∅ 50mm 50mm against deliberate access) solid objects exceeding 50mm in diameter.
2 Protected against Fingers or similar objects solid objects not exceeding 80mm in greater than length; solid objects ∅ 12.5mm 12,5mm exceeding 12,5mm in diameter
3 Protected against Tools, wires, etc...., of solid objects diameter or thickness greater than greater than 2,5 mm; ∅ 2.5mm 2,5 mm solid objects exceeding 2,5 mm in diameter
4 Protected against Wires or strips of solid objects thickness greater than greater than 1,0 mm; solid objects 1,0 mm exceeding 1,0 mm in diameter
5 Dust-protected Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment
6 Dust - light No ingress of dust
Thefirstcharacternumeralindicates the degree of protection provided by the enclosure with respect to persons and solid objects, also to the equipment inside the enclosure.
Thesecondcharacternumeralindicates the degree of protection provided by the enclosure with respect to harmful ingress of water; a third character may be used to indicate mechanical strength. An x signifies that no test has been carried out.
Thefirstcharacternumeralprotection against solid substances
Thesecondcharacternumeralprotection against liquid substances
IP Test Short Definition Description0 Non - protected No special protection
1 Protected a gainst Dripping water (vertically) dripping water falling drops) shall have no harmful effect
2 Protected against Vertically dripping water dripping water shall have no harmful when titled up effect when the enclosure to 15° is titled at any angle up to 15° from its normal position
3 Protected against Water falling as a spray at spraying water an angle up to 60° from greater than 60° the vertical shall have no harmful effect
4 Protected against Water splashed against splashing water the enclosure from any direction shall have no harmful effect
5 Protected against Water projected by a water jets nozzle against the enclosure from any direction shall have no harmful effect
6 Protected against Water from heavy seas heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities
7 Protected against Ingress of water in a the effect of harmful quantity shall not immersion be possible when the enclosure is immersed in water under defined conditions of pressure and time
8 Protected against The equipment is suitable submersion for continuous submersion in water under conditions which shall be specified by the manufacturer
15 cm
m
79
Circuit diagram
One way switch Two way switch
Marked Bell Switch
Intermediate Switch
Marked Press Switch
Dimmer Switch
Fan Control
80
Circuit diagram
Double Pole Control Switch Double Pole Control Switch with Neon
Double Pole Control Switch 20AX with Neon + 10AX
Double Pole Control Switch 20AX without Neon + 20AX with Neon
81
Circuit diagram
One way Large Dolly Switch with LED1. LED as location indicator 2. LEDas ON indicator
Two way Large Dolly Switch with LED1. LED as location indicator 2. LEDas ON indicator
3. LED as location indicator
600W 1 Gang Large Dolly DimmingSwitch with Neon(cycle Action)
400W 2 Gang Large Dolly DimmingSwitch with Neon(cycle Action)
82
Circuit diagram
83
Circuit diagram
Jack pin A B
1 White/Green White/Orange
2 Green/White Orange/White
3 White/Orange White/Green
4 Blue/White Blue/White
5 White/Blue White/Blue
6 Orange/White Green/White
7 White/Brown White/Brown
8 Brown/White Brown/White
Jack pin A B
1 White/Green White/Orange
2 Green/White Orange/White
3 White/Orange White/Green
4 Blue/White Blue/White
5 White/Blue White/Blue
6 Orange/White Green/White
7 White/Brown White/Brown
8 Brown/White Brown/White
84
Circuit diagram
HOTEL RANGE"DND" & PLS CLEAN UP" INDICATION BOX WITH DOOR BELL
DimensionSize 1 Size 2 Dimension: 87mm x 87mm Dimension: 87mm x 147mm Mounting: 60.3mm Mounting: 120.6mm
87mm
87mm
60.3mm87mm
147mm
120.6mm
Dimension
85
IP product dimension
Reference ProductRange IPRating Height Width DepthNo. mm mm mm
XPW5110 1G 1 Way Switch 10 AX IP55 91.0 84.0 67.5
XPW5120 1G 2 Way Switch 10 AX IP55 91.0 84.0 67.5
XPW5910 1G 10AX Bell Switch IP55 91.0 84.0 67.5
XRW5200 1G DP Switch 20 AX IP55 91.0 84.0 67.5
XPW5210 2G 1 Way Switch 10 AX IP55 91.0 84.0 67.5
XPW5220 2G 2 Way Switch 10 AX IP55 91.0 84.0 67.5
XPW5310 3G 1 Way Switch 10 AX IP55 91.5 110.0 67.5
XPW5320 3G 1 Way Switch 10 AX IP55 91.5 110.0 67.5
XSW5113 1G Socket Un-switched 13 A IP55 91.0 84.0 67.5
XSW5114 1G Socket Switched 13 A IP55 91.5 110.0 67.5
XSW5213 2G Socket Un-switched 13 A IP55 91.0 151.0 67.5
XSW5214 2G Socket Switched 13 A IP55 91.0 151.0 67.5
XSW6113 1G Socket Un-switched 13 A IP66 120.5 110.0 81.5
XSW6213 2G Socket Un-switched 13 A IP66 128.0 150.5 82.5
XSW6214 2G Socket Switched 13 A IP66 128.0 150.5 82.5
XRW6131 Switched Fused Spur 13 A IP66 120.5 110.0 81.5
XRW6130 Fused Spur with Flex outlet 13 A IP66 120.5 110.0 81.5
hager
IP55
W
H
D
hagerIP66
W
H
D
IP55 IP66
8686
hager
OFF
ON
IP 65 isolator
IP 66 isolator
2 pole
Reference Current H W D
JG220U 20 A 170 84 87
JG232U 32 A 170 84 87
JG240U 40 A 170 84 87
JG220U 63 A 170 84 87
• All dimensions are in mm
3 pole
Reference Current H W D
JG320U 20 A 170 84 87
JG332U 32 A 170 84 87
JG340U 40 A 170 84 87
• All dimensions are in mm
3 pole + switched neutral
Reference Current H W D
JG420U 20 A 170 84 87
JG432U 32 A 170 84 87
JG440U 40 A 170 84 87
JG420U 63 A 170 84 87
• All dimensions are in mm
2 pole
Reference Current H W D
JG220I 20 A 170 84 87
JG232I 32 A 170 84 87
JG240I 40 A 170 84 87
JG220I 63 A 170 84 87
• All dimensions are in mm
3 pole
Reference Current H W D
JG320I 20 A 170 84 87
JG332I 32 A 170 84 87
JG340I 40 A 170 84 87
• All dimensions are in mm
3 pole + switched neutral
Reference Current H W D
JG420I 20 A 170 84 87
JG432I 32 A 170 84 87
JG440I 40 A 170 84 87
JG420I 63 A 170 84 87
• All dimensions are in mm
hager
OFF
ON
87
Index
JGJG220I 69JG220U 69JG232I 69JG232U 69JG240I 69JG240U 69JG263I 69JG263U 69JG320I 69JG320U 69JG332I 69JG332U 69JG340I 69JG340U 69JG420I 69JG420U 69JG432I 69JG432U 69JG440I 69JG440U 69JG463I 69JG463U 69
WGCWGC1 20WGC1CA 20WGC1GD 20WGC1MP 20 WGC1SV 20WGC1TG 20WGC2 20WGC2CA 20WGC2GD 20WGC2MP 20WGC2SV 20WGC2TG 20
WGDWGD001 19
WGHWGHBD 13WGHDC 13WGHKT 13WGHKTCARD 13
WGLWGL101 10WGL111 10WGL111N 10WGL112 10WGL112N 10WGL11B 11
WGL11P 11WGL121 10WGL121N 10WGL122 10WGL122N 10WGL131 10WGL131N 10WGL132 10WGL132N 10WGL211 10WGL211N 10WGL212 10WGL212N 10WGL221 10WGL221N 10WGL222 10WGL222N 10WGL231 10WGL231N 10WGL232 10WGL232N 10WGL2D1N 12WGL2D1WH 13WGLD2D1 12
WGPWGP1D600 11
WGR WGR13 18WGR13S 18WGR13SN 18WGR25 18WGR32D1 12WGR45D1 12WGR45D2 12WGRCCU 12
WGSWGS105S 15WGS10IS 17WGS10U 17WGS10U2 17WGS10US 17WGS113 15WGS113N 15WGS113S 15WGS115 16WGS115S 16WGS116 16WGS116S 16WGS164M 17WGS167M 17WGS200 16
WGS213 15WGS213N 15WGS213S 15WGS267M 17
WGT WGT1M 14WGT1RJ 14WGT1RJ5 14WGT1RJ6 14WGT1S 14WGT2RJ 14WGT2RJ5 14WGT2RJ6 14WGTBT5 14WGTD 14WGTFM2 14WGTV75 14WGTV75F 14
WGV WGV1 19WGV2 19WGVE2 17WGVE3 17
XBXB8001 32XB8002 32XB8003 32XB8351 33XB8352 33XB8471 33XB8472 33
XC XC001 70XC002 70XC9001 45XC9002 45
XDXD9001 45
XHXH9001 51XH9001CARD 51XH9002 51XH9003 51
XL XL9001 48XL9110 48XL9117 48XL9120 48XL9127 48XL9200 50XL9206 50XL9206WH 50XL9210 48XL9211 48XL9212 48XL9217 48XL9220 48XL9221 50XL9221-2 48XL9222 50XL9222-2 48XL9222WM 50XL9227 48XL9231 48XL9232 48XL9241 48XL9242 48XL9310 48XL9317 48XL9320 48XL9327 48XL9410 48XL9420 48XL9515 49XL9525 49XL9910 49XL9911 49XL9911NM 49
XPXP001SS 54XP120MC 62XP120SS 54XP215SS 55XP220MC 62XP220SS 54XP320MC 62XP320SS 54XP420MC 62XP420SS 54XP8001 24XP8105 25XP8110 24XP8110RED 24XP8120 24XP8210 24XP8211 24XP8212 24XP8220 24
Ref. pageno. no.
Ref. pageno. no.
Ref. pageno. no.
Ref. pageno. no.
88
XRWXRW5200 66XRW5910 66XRW6130 68XRW6131 68
XS XS113FM 71XS113SS 57XS114MC 63XS114RCD 70XS114SS 57XS115MC 63XS115SS 57XS213FM 71XS213SS 57XS214MC 63XS214RCD 70XS214SS 57XS215MC 63XS215SS 57XS8113 28XS8114 28XS8117 28XS8211P 30XS8212P 30XS8213 28XS8214 28XS8217 28XS8221P 30XS8311P 30XS8314 30XS8413 29XS8414 29XS8905 29XS8906 29XS8915 29XS8916 29XS9113 42XS9114F 42XS9117 42XS916MC 63XS916SS 58XS917SS 58XS9200 41XS9211P 43XS9212P 43XS9213 42XS9214F 42XS9217 42XS9221P 43XS9413 43XS9414 43XS9905 42XS9906 42XS9915 43XS9916 43
XSWXSW5113 67XSW5114 67XSW5213 67XSW5214 67XSW6113 68XSW6213 68XSW6214 68
XT XT007SS 56XT008SS 56XT010SS 56XT8001 27XT8002 27XT8004 27XT8005 27XT8007 27XT8010 27XT8012 27XT8014 27XT8017 27XT8607 27XT9001 40XT9002 40XT9003 40XT9004 40XT9005 40XT9006 40XT9007 40XT9008 40XT9009 40XT9010 40XT9011 40XT9012 40XT9013 40XT9014 40XT9015 40XT9016 40XT9017 40XT9025 40XT9025 40
XVXV9101 41XV102SS 56XV202SS 56XV8101 27XV8102 27XV9102 41
Ref. pageno. no.
Index
XP8221 24XP8222 24XP8231 24XP8232 24XP8241 24XP8242 24XP8310 24XP8320 24XP8410 24XP8420 24XP8510 24XP8515 25XP8520 24XP8525 25XP8910 24XP8911 24XP9001 36XP9105 37XP910SS 54XP9110 36XP9120 36XP9210 36XP9211 36XP9212 36XP9220 36XP9221 36XP9222 36XP9231 36XP9232 36XP9241 36XP9242 36XP9310 36XP9320 36XP9410 36XP9412 36XP9420 36XP9515 37XP9525 37XP9610 36XP9620 36XP9810 36XP9820 36XP9910 37XP9911 37
XPWXPW5110 66XPW5120 66XPW5210 66XPW5220 66XPW5320 66
XRXR130SS 58XR131SS 58XR132MC 63XR134MC 63XR134SS 58XR137MC 63XR137SS 58XR138SS 58XR206MC 62XR206SS 55XR250SS 59XR327SS 55XR457MC 62XR457SS 55XR8130 31XR8131 31XR8137 31XR8138 31XR8200 25XR8203 25XR8204 25XR8206 25XR8206AC 26XR8206WH 26XR8207 25XR8222 25XR8250 31XR8327 26XR8327DW 26XR8450 31XR8456 26XR8457 26XR8458 26XR9130 44XR9131 44XR9137 44XR9138 44XR9200 38XR9201 38XR9201AC 39XR9206 38XR9206WH 39XR9207 38XR9207AC 39XR9207WH 39XR9222 38XR9250 45XR9327 38XR9327AC 39XR9450 45XR9456 38XR9457 38XR9458 39
Ref. pageno. no.
Ref. pageno. no.
Ref. pageno. no.
Wiri
ng A
cces
sorie
s 2
009
Hager Electro S.A.S132, Boulevard d'Europe67210 ObernaiFrance Tel: + 33 (0) 88 49 50 50Fax: + 33 (0) 88 49 51 44Email: [email protected]: www.hagergroup.net
Hager Electro LimitedSuite 310, Chinachem Golden Plaza77 Mody Road, TST East, KowloonHong Kong Tel: + (852) 2688 0228Fax: + (852) 2688 0336Email: [email protected]: www.hager.hk
Hager Electro Systems Pte Ltd23 New Industrial Road #01-03/04Century Industrial BuildingSingapore 536209 Tel : + (65) 6383 1030Fax : + (65) 6383 0230Email: [email protected]: www.hager.com.sg
Hager Engineering (M) Sdn, Bhd.Level 5, Lot 8, Jalan Astaka U8/84Seksyen U8, Bukit Jelutong40150 Shah AlamSelangor Darul EhsanMalaysia
Tel: + (60) 3 7859 1935Fax: + (60) 3 7859 1945Email: [email protected]: www.hager.com.my
Hager (VN) Electro Ltd82 Nguyen Ba Tuyen Street,War 12, Tan Binh District, Ho Chi Minh City, Vietnam
Tel: + (84) 8 3811 3548/ 49/ 50/ 51Fax: + (84) 8 3811 3552Email: [email protected]: www.hager.hk