FULL CUTOFF ARCHITECTURAL LED WALLPACK
INDUCTIONCFLHID LED
LEDFLUORESCENT
C O M P L I A N TDARK SKY
ArcLume
RoHSC O M P L I A N T
700 Ramona Ave. • Philadelphia, Pennsylvania 19120 • 800 523-3602 • www.simkar.com
FULL CUTOFF ARCHITECTURAL LED WALLPACK
Save energy, money, and the environment.
Replace a 175W metal halide wallpack with a 58W ArcLume LED wallpack and realize savings of up to $263 over a fi ve-year period, with the cost of the LED fi xture being offset in under two years.
ArcLume wallpacks also help protect the environment by producing more light from less energy, reducing the amount of fossil fuels burned and carbon dioxide emitted during power generation.
Product Input Watts Operating Hours Energy Cost kW hr Operating Cost
175W MH 190 18,250 $0.12 $416
58W LED 58 18,250 $0.12 $127
5-year savings per fi xture $289
ArcLume, a family of DLC-listed, full cutoff LED wallpacks, is designed specifically to optimize the performance and maximize longevity of LED light sources in an elegant form factor that blends seamlessly into any architectural environment. The ArcLume LED wall packs are designed to replace 100W to 250W metal halide wall mounted fixtures while providing up to 70% in energy savings and operating for up to 50,000 hours. That’s a service life of up to 13 years of nighttime use.Powered by high performance, energy-efficient, chip-on-board LEDs, the ArcLume LED wallpacks produce brighter, longer lasting illumination, reducing shadows and creating a safer nighttime environment while lowering utility and maintenance costs.
These energy efficient, maintenance free outdoor LED lighting products are also listed with the DesignLights Consortium and may qualify for significant utility rebates.
• Energy effi cient - up to 70% energy savings compared to HID
• Long lasting light source; LED operating life 50,000 hours L70
• Available in 3 lumen packages; 1900 (30W), 3800 (58W), and 5800 lumens (85W)
• Uniform, shadow-free, bright white light, 4000K color temperature, >80 CRI
• Thermally effi cient, die-cast aluminum housing for longer LED life
• Gasketed, high impact, clear polycarbonate lens
• Superior sealing - moisture and dust-proof; UL Listed Wet Location
• Refl ector designed for increased forward throw
• Optional lens insert increases diffusion
• 120V-277V operation, high power factor (>0.9)
• LEDs and power supply are replaceable
• 5-year warranty
Features
TM
ArcLume LED wallpack PerformanceModel Input Power Light Output* Mounting Height Equivalent HID**
ARCL30U1 30W 1900 lumens Up to 10’ 100W MHARCL58U1 58W 3900 lumens Up to 14’ 175W MHARCL85U1 85W 5800 lumens Up to 24’ 250W MH
* Delivered lumens**Consult an application engineer for specific light levels
ARCL58U1
FULL CUTOFF ARCHITECTURAL LED WALLPACK
HID LEDUp to 50%
light loss due tointernal refl ection
Effi cient,direct light
The ArcLume LED wallpack eliminates HID lamp maintenance, replacement, and disposal costs.Save $210 on HID lamps and the labor needed to change them over 50,000 hours.
ArcLume LED wallpacks eliminate lamp maintenance costs.
$0
$30
ArcLume
HIDWallpack
$0
$210*
Zero relampings needed over 50,000 hour operating life
7 relampings needed over 50,000 hour operating life1
$302
$303
$304
$30 $30 $305 6 7
50,000 hours / 13 years
*With $80 per hour labor rate, 15 minutes per fi xture, 175W MH lamp cost $10, relamping @ 6,000 hours.
ArcLume LED wallpacks deliver the lumens.HID wallpacks lose a high percentage of light to internal refl ection and the structure inside the fi xture – in some cases, up to 50% of the light generated by the lamp.
In contrast, ArcLume LED wallpacks deliver effi cient, directlight out of the fi xture, effectively illuminating your applicationwhile using signifi cantly less energy than HID wallpacks.
175W HID Wallpack 58W ArcLume LED Wallpack 14,000 In i t i a l L i gh t Sou r c e Lumens 6,000 5,000 De l i v e r ed F i x t u r e Lumens 5,800 HIGHER LIGHT OUTPUT
70% ENERGY SAVINGS
ARCL30U1
700 Ramona Ave. • Philadelphia, Pennsylvania 19120 • 800 523-3602 • www.simkar.com
60 YEARS
PHILADELPHIA• PENNSYLVANIA
1952 2012
ARCLUME 03102014INDUCTIONCFLHID LED
LEDFLUORESCENT
WET LOCATIONRoHSC O M P L I A N T
HOUSING / LENS / OPTICS Die-cast aluminum housing in bronze finish with clear polycarbonate lens. Thermally efficient LED-specific housing with integrated heat sink fins provides for cooler operation and maximum LED operating life. Weatherproof silicone gasketing around lens and between backplate and housing seals out contaminants. Optional diffuser insert (ADI) available for applications requiring greater diffuse light.
1.75” deep back plate DBS (standard 85W; optional on 30W and 58W units) provides an additional 1/2” top/bottom NPT as well as back knockout.
Angled LED mounting surface combined with integral 95% reflective MIRO 4™ reflector provides significantly more forward throw illumination than typical full cutoff LED wallpacks. Distribution is NEMA Type IV short.
LED Available in 3 light levels; 1900 lumens (30W), 3900 lumens (58W), and 5800 lumens (85W) at 4000K CCT; >80 CRI. LED operating life 50,000 hours L70. Light engines consist of 1, 2, or 3 chip-on-board arrays mounted direct to thermally efficient aluminum housing.
ELECTRICAL 120-277 VAC power supply with surge protection. Power factor is >0.9. Power supply is mounted in direct contact with aluminum housing for cooler operation and longer life. Drive current is 700 mA. 30W units use one power supply; 58W units use two, and 85W units use three.
ACCESS / WIRING Housing includes 1/2” top/bottom NPT. Specify option DBS (standard on 85W units) for a 1.75” deep die cast back plate with 1/2” top/bottom NPT and back center knockout for conduit feed or sensors.
MOUNTING Standard backplate for mounting over a 4” recessed junction box. Backplates and housing utilize installed brackets to hold fixture during wiring. Back plate includes center knock out for conduit access and drill points. The recommended wall mounting height of the of the ARCL LED wallpack is 10 ft. to 24 ft. Fixture is designed to be installed in the downward facing position only.
LISTINGS UL Listed wet location, Designlights™ Consortium listed.
WARRANTY 5 years
8.33
5 ”
0.81
5”
0.815”
7.52
”
5.59
3”2.
22”
7.52”
11.00”
2.22
”
1.7” 7.52”
With Standard Backplate
9.22
”1.
7”
7.52
”
With Optional Backplate DBS
5.59
3”
11.00”
FULL CUTOFF ARCHITECTURAL LED WALLPACK
C O M P L I A N TDARK SKY
ARCL85U1
ArcLume LED Wallpack Ordering Information
Series Input Power Voltage Options Accessories
ARCL 30 = 30W58 = 58W 85 = 85W
U1 = 120-277V DBS = Deep backplate with top and bottom 1/2" NPT. Standard on 85W units.(x)B = Button Photocell, designate voltage 1=120V; 2=277
ADI = ArcLume Diffuser insert