Full Opening SwingCHECK VALVE - API 6D
TABLE OF CONTENTSManufacturing range
CV values
Key features & benefits
Extended warranty
Cross sectional drawings
Engineering data
Common reference standards
Ordering information
Contact information and locations
2
2
3 & 4
3
5 & 6
7-10
11
11
Back cover
1 The data provided in this document is subject to change without notice.
† Wolseley Industrial Products Group Inc. o/a Meridian
TECHNICAL EXPERTISE, QUALITY AND SERVICE WHEN AND WHERE YOU NEED IT
Industrial Valves Meridian† is a leader in valve supply in Canada and has achieved exclusive, master or preferred distributor status with manufacturers of recognized, high quality products. Meridian is ISO 9001:2008 certified and stocks an industry leading inventory of both commodity and specific application valves in a wide range of sizes, materials and pressure classes.
Specific Application ValvesMeridian also stocks valves designed with specific features and proper metallurgy to provide proven solutions for tough applications. Applications include: SAGD, steam, molten sulphur, acid gas/tail gas service, pulp mill liquor service, pump and compressor discharge, high temperature/abrasive applications, pipeline pigging, cryogenic applications, high pressure steam and hot water applications, autoclave operations and other difficult services.
Valve ActuationMeridian provides rapid turn-around valve actuation solutions and will customize its industry leading valve product range to meet its customers’ actuation needs. Actuation products include electric actuators, pneumatic and hydraulic actuators, and control accessories.
Valve InnovationMeridian works in partnership with its customers and manufacturers to develop unique solutions to problems. A combination of experience, resources and broad technical knowledge gives Meridian an advantage reflected in our unique product offering and strong customer relationships. Examples include Meridian’s back pressure valve, low-bleed wellhead pressure control package and Forum choke package.
Valve ServicesIn addition to product sales and distribution, Meridian provides valve servicing capabilities in the field (selected areas); Meridian’s technicians offer various on-site and in-shop services that ensure lower operating costs, reduced down-time and increased valve life and reliability.
Pipe, Flanges and FittingsMeridian sources PFF products from reputable, well established global sources. Our quality assurance criteria for qualifying vendors is rigorous and extensive, focused on the vendor’s quality programs and
compliance to industry standards, manufacturing standards and ability to provide a dependable source of supply.
Major Project ManagementMeridian has established an experienced Project Management Team which has successfully completed both international and domestic projects. Special care is taken in sourcing products that meet the customer’s requirements commercially, technically, legally, operationally (including expediting, reporting and documentation) while adhering to the project schedule.
FB-CCP ®
FB-CCP® process leverages “critical control point” data to provide a quality control mechanism. Key components of the FB-CCP® process include:
A. Database links FB-CCP input to specific valve serial number.B. Visual review and/or inspection and sign-off at each stage in the processC. Check-list/traveler for each valve in production that tracks its progress from raw material to finished product.
2 The data provided in this document is subject to change without notice.
CV VALUES
900# 1500# 2500#600#SIZE 150# 300#
1077 993 79512568 1507 1507
1686 1555 1244196710 2360 2360
2431 2242 1794283612 3403 3403
65 60 482 91 91 76
110 102 822 5. 154 154 129
151 139 1113 211 211 176
272 2012514 380 380 317
408 377 3015 571 571 476
604 4465576 845 854 704
MERIDIANTM API 6D CHECK VALVEMANUFACTURING RANGE
(Size in inches)
Size2346810121416182024303640424850545660
ASME 150 ASME 300 ASME 600 ASME 900 ASME 1500 ASME 2500
Notes: 1. Larger size data available on request.2. Flow coefficient Cv is the volume (in US gallons) of water at 60°F that will flow per minute through a valve with a pressure drop of 1 psi across the valve.
“ ” denotes MeridianTM’s standard design.
“ ” denotes larger sizes that are available on request, please contact Meridian for details.
3 The data provided in this document is subject to change without notice.
GENERAL FEATURES• Firesafe design
• Standard valves meet NACE
• Full-port piggable
• In-line repairable
• Bleed Plug on cover
• Support feet on 6” and larger
• Lifting eye bolts on 4” and larger
• Suitable for horizontal and vertical (flow-up) installation. Engineering review of process conditions required for vertical installation.
• Boss provided for drain plug
• Standard document package ISO / EN 10104.3.1
• All o-rings are AED (anti-explosion decompression design)
COVER FEATURES• Independent dual cover seals (non-pressure seal
design)
• Pressure seal cover standard for larger/high pressure valves
• 10” and larger ASME 1500
• 8” and larger ASME 2500
OPTIONAL FEATURES• External lever arm and weight (design changes
apply, additional information available on request)
• Tapped drain plug
SEAT DESIGN FEATURES • Full stainless steel seat (ASTM A182 F316)
• Forged steel disc with 316 overlay on sealing area
• Replaceable O-ring in seat (see image “B” on next page) located to protect from flow
• Dovetail seat seal groove
CERTIFICATION & TESTING Design Standard: API 6D-2008
CSA Z245.15-09
Face to Face: ASME B16.10-2009
Flange: ASME B16.5-2009
Marking: MSS SP-25-2008
Inspection: API 598-2009
Pressure & Temp.: ASME B16.34-2009
Quality: MSS SP-55-2011
Fire Safe Design: ISO 10497
Sour: NACE MR 0175-2009
ISO 15156-2009
Region 3
Pressure Testing: API 6D-2008
MERIDIANTM KEY FEATURES AND BENEFITS
Meridian stands behind the products it sells and provides an industry leading warranty of 48 months from date of shipment or 24 months from the date of start-up (whichever is sooner) for all MeridianTM brand API 6D check valves, flanged or buttweld trunnion ball valves, and floating ball valves.
MERIDIANTM EXTENDED WARRANTY
INDUSTRY
LEADING
WARRANTY
4 The data provided in this document is subject to change without notice.
CROSS SECTIONAL DRAWING
INDEPENDENT DUAL COVER SEALSFor valves not using a pressure seal design, the primary seal is an o-ring supported by a firesafe 316 SS spiral wound graphite gasket (150# - 600# ASME) or a metal seal ring.
SS SEAT WITH O-RINGSeat is full stainless steel with an o-ring tucked out of the flow. Forged steel disc has a 316 SS weld overlay on the sealing area.
BLEED PLUG
BOSSFor optional drain plug.
SEAT DISC
SEAT O-RING
B
5 The data provided in this document is subject to change without notice.
DESCRIPTIONSBODYSEATSEAT O-RINGDISCROCKER ARMCOTTER PINNUT
ITEM1234567
DESCRIPTIONSWASHERHINGE PINROCKER ARM HANGERNUTSTUDSPIRAL WOUND GASKET/METAL SEAL RING
ITEM8910111213
DESCRIPTIONS SPRING WASHERROCKER ARM HANGER BOLTEYE BOLTPLUG (NPT)COVERO-RING
ITEM141516171819
CROSS SECTIONAL DRAWING
API 6D Check ValveBolted Bonnet Design
6 The data provided in this document is subject to change without notice.
DESCRIPTIONSBODYSEATSEAT O-RINGDISCDISC RETAINERDISC RETAINER SCREWROCKER ARM
ITEM1234567
DESCRIPTIONSHINGE PINPRESSURE SEAL COVERSEAL RINGSEGMENT RINGBONNETSTUDNUT
ITEM891011121314
DESCRIPTIONSEYEBOLTPLUG (NPT)GLANDPACKINGSTUDNUTWARNING TAG / RIVET
ITEM15161718192023/24
CROSS SECTIONAL DRAWING
API 6D Check ValvePressure Seal Bonnet Design
Range: 10” & Larger ASME 1500 8” & Larger ASME 2500
7 The data provided in this document is subject to change without notice.
ENGINEERING DATA
Note: Please contact Meridian for current pdf drawings.
8 The data provided in this document is subject to change without notice.
ENGINEERING DATA
* Contact the factory as required.
* Contact the factory as required.
Note: Please contact Meridian for current pdf drawings.
9 The data provided in this document is subject to change without notice.
ENGINEERING DATA
* Contact the factory as required.
* Contact the factory as required.
Note: Please contact Meridian for current pdf drawings.
10 The data provided in this document is subject to change without notice.
ENGINEERING DATA
* Contact the factory as required.
* Contact the factory as required.
* Contact the factory as required.
Note: Please contact Meridian for current pdf drawings.
11 The data provided in this document is subject to change without notice.
ORDERING INFORMATION
API - AMERICAN PETROLEUM INSTITUTE API 598 Valve inspection and testing API Q1 Specification for quality programs API 6D Specification for pipeline valves API 607 Fire test for quarter turn valves with non- metallic seats
ASME - AMERICAN SOCIETY OF MECHANICAL ENGINEERS B16.5 Pipe flanges and flanged fittings B16.10 Face to Face and end to end dimensions of valves B16.25 Butt welding ends B16.34 Valves - flanged, threaded and welding ends B16.47 Large diameter steel flanges
MSS - Manufactures Standardization Society MSS SP - 25 Standard marking system for valves, flanges, fittings and unions MSS SP - 44 Steel pipeline flanges MSS SP - 54 Quality standard for steel castings for valves, radiographic examination method MSS SP - 55 Quality standard for steel castings for valves, visual method
BS - BRITISH STANDARD BS EN ISO 10204 Metallic products - inspection documents
CSA - CANADIAN STANDARDS ASSOCIATION CSA B51 Boiler, pressure vessel and pressure piping code CSA Z245.15 Steel valves CSA Z662-11 Oil and gas pipeline systems
ISO - INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ISO 9001 Quality management systems ISO TS 29001 Specification for quality programs ISO 15156 (All) Sulphide stress cracking resistant metallic materials for oil field equipment ISO 14313 Pipeline transportation systems - pipeline valves ISO 5208 Pressure testing of metallic valves ISO 10497 Fire type testing of valves NACE - NACE INTERNATIONAL, THE CORROSION SOCIETY MR0175 Sulphide stress cracking resistant metallic materials for oilfield equipment MR0103 Sulphide stress cracking resistant metallic materials for petroleum refining
COMMON REFERENCE STANDARDS
DO
C 1
893
02/0
6
Size Pressure Class End Connection Service Body Material Clapper Material Seal Material Seat Type
2 - 2” 3 - 3”4 - 4”6 - 6”8 - 8”
10 - 10”12 - 12”16 - 16”
Etc.
1 = 150 3 = 3006 = 6009 = 90015 = 150025 =2500A2 = 2000 APIA3 = 3000 APIA5 = 5000 API
B = BW J = RTJR = RFX = Special
L = Low Temp. NACEN = Regular Temp. NACEB = Standard (sweet)X = Special
C = A352 LCCA = A216 WCBE = A351 CF8MX = Special
E = A182 F316C = A350 LF2 with 316 SS seal areaB = A105 with 316 SS seal area X = Special overlay
A = HNBR/ Graphite (150-600#)B = HNBR/ A182 F316 (900-2500#)V = Viton GFLT/ GraphiteX = Special
B = Integral
2
SF*
3 R L C E A B
+
+ + + + + + +
Example valve figure number: SF23RLCEABThis code represents a swing check, full bore, 2” 300# ASME, raised face end connection, low temp. NACE valve with a A352 LCC body, A182 F316 clapper, HNBR/Graphite seals and an integral seat type.
*Note: Please add the SF, for “swing type, full bore” to the front of the figure number.
Meridian/Maverick locations identified with “ ”.
Head Office3780 - 98 StreetEdmonton, AB
T6E 6B4Phone: 1.800.661.6997
Fax: 1.800.263.8298
HannaPh: 403.854.4960 Fax: 403.854.4967
OldsPh: 403.556.1990Fax: 403.556.2731
OyenPh: 403.664.2100 Fax: 403.664.3050
PonokaPh: 403.783.4405Fax: 403.783.2855
RimbeyPh: 403.843.2661 Fax: 403.843.3775
EdmontonPh: 780.468.7161 Fax: 780.469.2655
CalgaryPh: 403.243.3001 Fax: 403.243.0492
RichmondPh: 604.278.4640Fax: 604.278.7515
Fort St. JohnPh: 250.785.9643Fax: 250.785.9651
Grande PrairiePh: 780.532.4208 Fax: 780.532.4264
BurlingtonPh: 905.331.2180Fax: 905.331.3218
SarniaPh: 519.336.0014Fax: 519.336.6899
SudburyPh: 705.682.9779Fax: 705.682.9780
MontrealPh: 514.343.5400Fax: 514.343.8625
R18
93 0
7 08
13