Full range brochure US

Dynapac Equipment RangeCA / CC / CP / CS / Planer / Paver 2013

2

Vibratory Soil CompactorsSingle Drum Rollers .............................................. 3

Vibratory Asphalt CompactorsTandem Rollers ..................................................... 7

Vibratory Asphalt CompactorsCombi Rollers ..................................................... 10

Pneumatic & Static Compactors .......................... 12

Pavers ................................................................ 13

Compactasphalt® ............................................... 13

Planers ............................................................... 14

Contents

3

CA134 PD CA134 PDBOperating weight (incl. ROPS) (lbs) 10,500 11,000Drum width (inches) 54 54Amplitude (inches) 0.060 0.060 Frequency (vpm) 2,100 2,100Centrifugal force (lb) 20,000 20,000Engine:

Model (John Deere) 5030 TF270 5030 TF270Power (hp) 84 84

Production (cu. yard/hr.) 340 340

CA134PDCA134PDB

CA134 D Operating weight (incl. ROPS) (lbs) 10,100 Drum width (inches) 54 Amplitude (inches) 0.067 Frequency (vpm) 2,100 Centrifugal force (lb) 20,000 Engine:

Model (John Deere) 5030 TF270 Power (hp) 84

Production (cu. yard/hr.) 545

Vibratory Soil CompactorsSingle Drum Rollers

CA134D

4


CA152 DOperating weight (incl. ROPS) (lbs) 16,200Drum width (inches) 66Frequency (vpm)/Amplitude (in.):

@ High Amplitude 1,860/0.066 @ Low Amplitude 2,580/0.033Centrifugal force (lb):

@ High Amplitude 25,650 @ Low Amplitude 24,525Engine: Model (Cummins) QSB 3.3 Power (hp) 99

CA152D

CA152 PD CA152 PDBOperating weight (incl. ROPS) (lbs) 16,980 17,870Drum width (inches) 66 66Frequency (vpm)/Amplitude (in.):

@ High Amplitude 1,860/0.068 1,860/0.068 @ Low Amplitude 2,580/0.034 2,580/0.034Centrifugal force (lb):

@ High Amplitude 32,175 32,175 @ Low Amplitude 30,600 30,600Engine: Model (Cummins) QSB 3.3 QSB 3.3 Power (hp) 99 99

CA152PDCA152PDB

CA150 D CA150 PDOperating weight (incl. ROPS) (lbs) 15,880 16,540Drum width (inches) 66 66Frequency (vpm)/Amplitude (in.):

@ High Amplitude 1,860/0.066 1,860/0.069@ Low Amplitude 2,580/0.033 2,580/0.034Centrifugal force (lb): @ High Amplitude 25,620 32,175 @ Low Amplitude 24,405 30,600

Engine:Model (Cummins) B3.3 B3.3 Power (hp) 80 80

CA150DCA150PD

CA2500D CA2500PDOperating weight (incl. ROPS) (lbs) 22,300 24,300Drum width (inches) 84 84Frequency (vpm)/Amplitude (in.):


@ High Amplitude 56,210 56,210 @ Low Amplitude 29,230 29,230Engine: Model (Cummins) QSB4.5 T4i QSB4.5 T4i Power (hp) 130 130

CA2500DCA2500PD

Unit displayed with optional cab

5




@ High Amplitude 60,750 63,000 @ Low Amplitude 27,000 33,750Engine:Model (Cummins) QSB4.5 T4i QSB4.5 T4iPower (hp) 160 160

CA3500DCA3500PD

CA4000DCA4000PD



@ High Amplitude 60,750 63,000 @ Low Amplitude 27,000 33,750Engine: Model (Cummins) QSB4.5 T4i QSB4.5 T4i Power (hp) 160 160

CA3600DCA3600PD



@ High Amplitude 60,750 63,000 @ Low Amplitude 27,000 33,750Engine: Model (Deutz) TCD6, 1L06 T4i TCD6, 1L06 T4i Power (hp) 173 173

CA5000DCA5000PD

CA5000D CA5000PDOperating weight (incl. Cab) (lbs) 35,700 36,300Drum width (inches) 84 84Frequency (vpm)/Amplitude (in.):







6



@ High Amplitude 1,740/0.083 1,740/0.083 @ Low Amplitude 1,800/0.031 1,800/0.031Centrifugal force (lb): @ High Amplitude 81,000 81,000 @ Low Amplitude 33,750 33,750Engine: Model (Deutz) TCD6, 1L06 T4i TCD6, 1L06 T4i Power (hp) 173 173

CA5500DCA5500PD




CA6000DCA6000PD



CA6500D CA6500PDOperating weight (incl. Cab) (lbs) 46,000 45,700Drum width (inches) 84 84Frequency (vpm)/Amplitude (in.): @ High Amplitude 1,740/0.083 1,740/0.083 @ Low Amplitude 1,800/0.031 1,800/0.031Centrifugal force (lb):


CA6500DCA6500PD


CA702D CA702 PDOperating weight (incl. ROPS) (lbs) 59,415 59,415Drum width (inches) 84 84Frequency (vpm)/Amplitude (in.):


@ High Amplitude 74, 190 71, 210 @ Low Amplitude 57,100 51,945Engine: Model (Cummins) QSB 6.7 T3 QSB 6.7 T3 Power (hp) 220 220Production (cu. yard/hr.) 6,100 6,100

CA702CA702PD


7

Vibratory Asphalt CompactorsTandem Rollers

CC800CC900

CC800 CC900Operating weight (incl. ROPS) (lbs) 3,470 3,530Drum width (inches) 31 35Amplitude (inches) 0.016 0.016 Frequency (vpm) 4,200 4,200Centrifugal force (lb) 3,825 3,825Engine: Model (Perkins) 403D-11 403D-11 T4i Power (hp) 23.5 23.5

CC900GOperating weight (incl. ROPS) (lbs) 2,955Drum width (inches) 35Amplitude (inches) 0.016 Frequency (vpm) 4,200 Centrifugal force (lb) 3,825Engine: Model (Honda) GX620K1QYD Power (hp) 20

CC900G

CC1100Operating weight (incl. ROPS) (lbs) 5,180Drum width (inches) 42Amplitude (inches) 0.020Frequency (vpm) 3,420/3,960Centrifugal force (lb) 5,170/6,840 Engine: Model (Kubota) D1703-M T4i Power (hp) 35Production (tons/hr) 150

CC1100

CC1000 CC1000Operating weight (incl. ROPS) (lbs) 3,715Drum width (inches) 39Amplitude (inches) 0.014 Frequency (vpm) 4,200 Centrifugal force (lb) 3,825Engine: Model (Perkins) 403D-11 T4i Power (hp) 23.5

CC1200Operating weight (incl. ROPS) (lbs) 5,735Drum width (inches) 47Amplitude (inches) 0.020Frequency (vpm) 3,480/4,020 Centrifugal force (lb) 6,075/8,170Engine: Model (Kubota) D1703-M T4i Power (hp) 35Production (tons/hr) 170

CC1200

CC1300Operating weight (incl. ROPS) (lbs) 8,600Drum width (inches) 51Amplitude (inches) 0.020Frequency (vpm) 3,120 Centrifugal force (lb) 7,440Engine: Model (Kubota) V2203-M T4i

Power (hp) 45Production (tons/hr) 185

CC1300

Unit shown with foldable ROPS.






8

CC224HFOperating weight (incl. ROPS) (lbs) 17,000Drum width (inches) 59Frequency (vpm)/Amplitude (in.):


@ High Amplitude 17,540 @ Low Amplitude 15,060Engine: Model (Deutz) TCD3.6 T4i Power (hp) 100Production (tons/hr) 205

CC224HF


CC234HF



@ High Amplitude 16,190 @ Low Amplitude 13,260

Engine: Model (Deutz) TCD3.6 T4i Power (hp) 100Production (tons/hr) 205

CC324HF




CC334HF




CC384HF




Unit shown with optional offset drums





9


CC524 HFOperating weight (incl. ROPS) (lbs) 24,900Drum width (inches) 77Frequency (vpm)/Amplitude (in.): @ High Amplitude 3,060/0.031 @ Low Amplitude 4,020/0.012Centrifugal force (lb):

@ High Amplitude 34,650 @ Low Amplitude 22,720Engine: Model (Cummins) QSB 4.5 T4i


CC524 HF

CC424 HF CC424 HFOperating weight (incl. ROPS) (lbs) 22,500Drum width (inches) 68Frequency (vpm)/Amplitude (in.):


@ High Amplitude 31,280 @ Low Amplitude 20,700Engine: Model (Cummins) QSB 4.5 T4i


CC624 HFOperating weight (incl. ROPS) (lbs) 26,460Drum width (inches) 84Frequency (vpm)/Amplitude (in.):


@ High Amplitude 37,350 @ Low Amplitude 23,850

Engine: Model (Cummins) QSB 4.5 T4i


CC624 HF

CC722Operating weight (incl. ROPS) (lbs) 37,000Drum width (inches) 84Frequency (vpm)/Amplitude (in.):


@ High Amplitude 48,375 @ Low Amplitude 22,950Engine: Model (Cummins) QSB 6.7 T4i Power (hp) 220Production (tons/hr) 300

CC722

Unit shown with optional

intelligent compaction

Unit shown with optional optional drum

cutter/edge press

Unit shown with optional water tanks.

10

CC1200 COperating weight (incl. ROPS) (lbs) 5,400Drum/Wheel width (inches) 47/46Amplitude (inches) 0.02Frequency (vpm) 3,480/4,020 Centrifugal force (lb) 6,075/8,170Engine: Model (Kubota) D1703-M T4i Power (hp) 35Production (tons/hr) 115

CC1200C

Vibratory Asphalt CompactorsCombi Rollers

CC224CHFOperating weight (incl. ROPS) (lbs) 16,300Drum/Wheel width (inches) 59/57Frequency (vpm)/Amplitude (in.):



CC224CHF

CC1300 COperating weight (incl. ROPS) (lbs) 8,300Drum/Wheel width (inches) 51/50Amplitude (inches) 0.02Frequency (vpm) 3,120 Centrifugal force (lb) 7,440Engine: Model (Kubota) V2203-M T4i Power (hp) 45Production (tons/hr) 120

CC1300C

CC1100COperating weight (incl. ROPS) (lbs) 5,100Drum/Wheel width (inches) 42/41Amplitude (inches) 0.02Frequency (vpm) 3,400/3,960 Centrifugal force (lb) 5,175/6,840Engine:

Model (Kubota) D1703-M T4i Power (hp) 35

Production (tons/hr) 115

CC1100C

Unit shown with foldable ROPS



11



@ High Amplitude 16,190 @ Low Amplitude 13,260Engine: Model (Duetz) TCD 3.6 T4i Power (hp) 100Production (tons/hr) 160

CC234CHF




CC324CHF




CC334CHF




CC424CHF




CC524CHF

Unit is equipped with split drum

Unit is equipped with split drum

12

Pneumatic & Static Compactors CP142Max operating weight (incl. ROPS)(lbs) 30,865 (attained with optional 8 solid steel ballast boxes)Compaction width (inches) 69Number of tires (front/rear) 5/4Max. wheel load 3,440 lbs/wheelEngine: Model (Cummins) QSB 3.3 Power (hp) 99Ground contact pressure 65-91 psiProduction (sq. yards/hr) 5,280

CP142

CP224CP274

CS142N

CP224 CP274Max operating weight (incl. ROPS) (lbs) 46,300 59,500Compaction width (inches) 71 91Number of tires (front/rear) 3/4 5/4 Max. wheel load (lbs/wheel) 6,600 6,600Engine: Model (Cummins) QSB 3.3 QSB 4.5 Power (hp) 99 110Ground contact pressure 36-80 psi 36-80 psiProduction (sq. yards/hr) 5,460 7,050

CS142 NOperating weight (incl. ROPS) (lbs) 23,800Compaction width (inches) 83Static linear load, std/max (pli):

Front 280/330 Rear 269/324 Engine: Model (Cummins) QSB 3.3 Power (hp) 99Production (tons/hr) 265

Unit shown with optional 8 solid

steel ballast boxes

13

High Density Paver

SD2500CS

Pavers

F1000T

SD2500CS

F1000W

F1000W

F1000TTractor weight, lbs 35,000 Hopper capacity, ft3 207 Max paving width, ft 26 Max laying thickness, in 12 Paving speed, ft/min 0-240 Engine: Model (Cummins) QSB6.7 T4i Power, hp 230

Suitable screeds: EZIII-10 6,000 lbs EZIV-10 7,000 lbs EZR-10 8,250 lbs

Tractor weight, lbs 33,400Hopper capacity, ft3 207Max paving width, ft 26 Max laying thickness, in 12Paving speed, ft/min 0-285Engine: Model (Cummins) QSB6.7 T4i Power, hp 230

Suitable screeds: EZIII-10 6,000 lbs EZIV-10 7,000 lbs EZR-10 8,250 lbs

Tractor weight, lbs 37,000 Hopper capacity, ft3 230 Basic paving width, ft 8.37Max. paving width, ft 32.8 Max. laying thickness, in 12.6 Paving speed feet/min 90 Engine: Model (Cummins) QSB 6.7 T4i Power, hp 200

Suitable screeds: Dynapac V5100TVE - rear extension 7,500 lbs Dynapac V6000TVE - rear extension 8,500 lbs

14

Planers

PL350TD PL350TD

PL500TPL500T

PL500TD

PL500TDPL500TD

Operating weight, lbs 7,717Working width, in 13,8 Spacing, in 0.5 Number of bits 42Cutting diameter, in 19.4Operating speed, ft/min 0-82Engine: Model (Cummins) B3.3 Power, hp 60

Operating weight, lbs 16,096Working width, in 19.7Spacing, in 0.56 Number of bits 53Cutting diameter, in 27.5Operating speed, ft/min 0-24Engine: Model (Cummins) QSB4.5- C110 Power, hp 110


15


Service ContractsServicing your machines regularly is very important to ensure reliable operation and a long service-life. With pro-active service and preventive maintenance you minimize the risk of high production costs and break-downs. Dynapac have developed service contracts based on experiences from customer feedback, application know-how, field support and product development.

You can select a service contract that meets your requirement of professional service in order to get the outmost of your machine investment.

We offer service contracts in three different levels:Inspection plan - We support youCARE - We do it togetherTotal responsibility plan - We do it for you

Contact your local Dynapac or Dealer representative for more details

Parts & Service Solutions

All in one box kitsAll in one box, tailored to match your Dynapac equipment. The parts you need, when you need them!

All in one box contains all the parts required as part of the equipment’s scheduled maintenance and winter main-tenance program. When installed by a Dynapac certified technician, you keep your downtime to a minimum and your equipment in top condition its entire life.

Easy to obtain & attractively priced, the most effective solution to keep your maintenance budget low.

Find a suitable kit @ www.dynapac.com/kitselector

Dynapac Fluids• The right fluid optimizes machine performance • Simplified selection process, less time spent

on finding right oil • Delivery in a handy can, no need for transfer

from oil-drum• All in one delivery, less time spent on waiting

and dealing with different suppliers• One invoice, less administration

Find a suitable fluid @ www.dynapac.com/fluidselector

3492

006

8 93

a - M

arch

201

3

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, is not guaranteed and contains no warranties of any kind.

The Sustainable Way Sustainability is more than just a concept at Dynapac. It is a core value that is reflected in our corporate conduct, our manufacturing proces-ses and the quality control that goes into every piece of Dynapac equipment. Our commitment to lasting results runs throughout the life cycle of our equipment – from product development, sour-cing and manufacturing processes, to the use of equipment and service and support offerings. Most importantly, it is a promise to our customers and the communities in which we all live and work to continually develop innovative products and solutions that contribute to a strong infrastructure and a more sustainable environment. At Dynapac, a sustainable future begins today.

Create lasting resultsThrough our equipment, expertise and support, we contribute to create lasting results that pays off for our customers and other stakeholders.

Focus on QualityWe strive to do things right from the beginning and prioritize right, putting our resources at work where they can create the biggest benefits and return on investment.

Take responsibilityWe shall be a responsible company in terms of social, environmental, ethical and financial aspects. As a part of the Atlas Copco Group, we share the Group´s objective to do all we can to ensure reliable, lasting results with responsible use of resources; human, natural, and capital.

qq

q

Atlas Copco CMT USA LLC, 3700 E. 68th Avenue, Commerce City, CO 80022, Phone: 800-732-6762, Fax: 303-288-8828

www.dynapac.us

Date post:	22-Feb-2016
Category:	Documents
Upload:	dynapac-compaction-equipment-ab
View:	237 times
Download:	0 times

Full range brochure US

Documents