FULTON ARMORY 5.56/.223 UPR RIFLE» Slick Side Upper Receiver with Side Cocking» 16.5” Chrome-Moly Chrome-Lined HBAR Barrel» Ergo Grip, Command Arms CAR Stock» Vortex Flash Suppressor» Yankee Hill Flip-Up Rear Sight» 1-7’ Rail, 3-2” Rails» Sling Swivel For Rail» Length 33.5”-37.25”, Weight 7.5 lbs.
FULTON ARMORY .308 Titan UPR» Titan Slick Side Upper Receiver
with Side Cocking» 20” Barrel with Target Grey Finish» Bennie Cooley Compensator» SPR Grip, Magpul PRS Stock» 1-12” Rail, 2-4” Rails» Troy Flip-Up Front and Rear Sights» Harris Bipod on Sling Swivel Stud» Length 41.25”-42.25”» Weight 11.60 lbs.
Price as Shown: 2599.95
2
The New Fulton Armory FAR.308s set a new standard in .308/7.62-MM Rifles!Every Titan is a beautifully proportioned custom weapon built just for you.
Titan Rifles, Carbines and Upper Receiver Assemblies come standard with a Criterion by Krieger 16”, 18.5” 20” or 22” Stainless Steel 4 groove (Carbine:Medium Weight; Rifle: Heavy Weight) Barrel, Heavy-Duty Titan Gas Block with compression fit (no set screws, can’t work loose!), Titan A2 Flash Suppressor (USGIVortex Direct Connect Flash Suppressor or Bennie Cooley JP Muzzle Brake optional), hard chrome bolt carrier, Titan Float Tube with optional multiple-positionmultiple-length (2” to 12”) rails for all four sides and steel locking ring, and a slick-side no-snag upper of 6066T6 aluminum, both hard coat anodized and blackteflon coated for superlative wear resistance. The Picatinny receiver rail co-registers with the optional float tube upper rails, providing for optional detachablefront and rear iron sights. Titan upper receiver assemblies are 100% compatible with DPMS and .308 Remington AR-type Lower Receivers. Guaranteed under1 MOA, or your Money Back!
Titan Lower Receiver Assemblies are precision-crafted from 6061T6 forged billets, hard coat anodized and black teflon coated for superlative wear resistance.Titan lower receiver assemblies come standard with a Fulton Armory-tuned, ppolished and lapped military trigger, with a non-adjustable two stage match or thefully adjustablestate-of-the-art Geissele “fast action” trigger optional. The optional full-bodied Titan SPR pistol grip gently distributes the felt recoil of this robust.308 evenly across the hand. The standard A2 buttstock can be optionally supplanted by the Magpul Titan UBR, PRS or CTR Stock for a personally tailored fit. Thebolt stop is a new heavy-duty design for long-lasting, reliable function. The Titan lower receiver accepts DPMS or SR-25 magazines and DPMS or Remington .308AR-type Upper Receivers.
Titan Rifles and Carbines combine the Titan Upper and Lower Assemblies to create a rifle or carbine with all the performance, reliability and durability you’vecome to expect from Fulton Armory’s Peerless quality. You can pay more for a precision .308, but you’ll get less; we guarantee it, or your money back!
Standard Features (See Options Right)Lower Receiver Group
» Fulton Armory .308 Titan Lower Receiver» Milled from Solid Billet of 6061-T6 Aluminum» Hard Coat Black Anodized per Mil Spec & Teflon Coated» Hand-Tuned Military Trigger» A1, A2 or CAR Stock & A2 Grip» Your Choice of 4-, 9- or 19-Round Magazine» .308 Titan Manual» Fits .308 DPMS & Remington Uppers. FFL Required
Upper Receiver Group» Fulton Armory .308 Titan Slick Side Upper Receiver» Machined from 6066-T6 Extruded Aluminum Alloy» Thick Walled for Strength, Rigidity and Accuracy» Clean No Snag Design» No Ejection Port Cover, No Forward Assist or Case Deflector» Hard Coat Black Anodized per Mil Spec & Teflon Coated» Fits DPMS and Remington .308 AR-type Lowers
Barrel Group» Fulton Armory .308 Titan 16.5" or 18.5" Stainless
Medium Weight Contour for Reduced Weight, or 20" or 22"Stainless Heavy Weight Contour for Rigidity and Accuracy
» Legendary Fulton Armory Accuracy & Quality» Chambered for .308 Win AND 7.62X51 NATO» 1X10 Twist, 4 Grooves, Button Rifled and Lapped» Criterion by Krieger» Rifle Length Gas Tube for Reliability and Durability» 5/8” x 24 Threaded Muzzle with A2 Flash Suppressor» .936" Gas Block Diameter with Titan Gas Block, No Set Screws,
Compression Fit, Won’t Shoot Loose
Handguard Free Float Tube—3 Piece, .308 Titan UPR Float Tube—Customize It the Way YOU Want, When You Want—Strong, Light Weight Aluminum Design—Rifle Length Allows for Plenty of Room for Hand & Rails—Steel Locking Ring—3 Piece Design is Fully Index Able—Front Handguard Stud w/Sling Swivel—Predrilled for Optional Handguard Rails—Put Rails Where You Want, and Not Where You Don’t—Rails from 2"-12" Available
Group Options—Add for Command Arms CAR 6 Position Stock .................... 20.00—Add for Magpul UBR/PRS/CTR Stock ......... 220.00/225.00/50.00—Add for Hand Tuned, Polished and Installed,
2 Stage Non Adjustable NM Trigger ................................. 125.00—Add for Hand Tuned, Polished and Installed
Geissele Adjustable 2 Stage NM Trigger;Specify DCM Service or DMR ........................................... 295.00
—Add for Ergo Grip .............................................................. 18.00—Add for Titan SPR Grip ....................................................... 23.00
Upper Receiver Group .............................................. 999.95
Upper Receiver Options—Add for Side Cock Modification (Slick Side Only) ............... 100.00 —Add for .308 Titan A4 Upper Receiver .............................. 75.00
» Includes Forward Assist, Port Cover and Case Deflector—Add for Tactical Charging Handle Latch ............................ 20.00—Add For Rear Sight, Flip Up, for Flat Top
Yankee Hill ................................................................... 90.00Troy Industries, Black or Flat Dark Earth ........................ 140.00
—Add For Front Sight, Flip Up, for Handguard Rail (Requires Rail)Yankee Hill ................................................................... 80.00Troy Industries, Black or Flat Dark Earth ........................ 120.00
—Add for Sling Swivel for Rail (Requires Rail) ...................... 18.00
Barrel Group Options—Add for 6.5 Creedmoor 26” Krieger Single Point Cut
Stainless Heavy Match Barrel ..................................... 450.00—Add for Non-Reflective Target Grey Finish ........................ 35.00—Add for Muzzle Brake, JP, Bennie Cooley, .308 Titan,
(not available on 6.5 Creedmore Heavy Barrel) ............. 100.00» Best In Class» 5/8 x 24 Thread, Stainless» Beautiful With Standard or Target Gray Finish
—Add for for Flash Suppressor, Vortex, .308 Titan ............... 90.00
Handguard Free Float Tube Options—Add for Harris Bipod ......................................................... 80.00—Add for Handguard Free Float Tube Rails
2”, 3" and 4"/7”/12” .................................. 20.00/27.00/40.00
FULFULFULFULFULTON ARMORY .308 TITTON ARMORY .308 TITTON ARMORY .308 TITTON ARMORY .308 TITTON ARMORY .308 TITAN—THE NEW STAN—THE NEW STAN—THE NEW STAN—THE NEW STAN—THE NEW STANDANDANDANDANDARD IN .308 ARARD IN .308 ARARD IN .308 ARARD IN .308 ARARD IN .308 AR-----TYPE RIFLESTYPE RIFLESTYPE RIFLESTYPE RIFLESTYPE RIFLES
FULFULFULFULFULTON ARMORY .308 TITTON ARMORY .308 TITTON ARMORY .308 TITTON ARMORY .308 TITTON ARMORY .308 TITAN—THE NEW STAN—THE NEW STAN—THE NEW STAN—THE NEW STAN—THE NEW STANDANDANDANDANDARD IN .308 ARARD IN .308 ARARD IN .308 ARARD IN .308 ARARD IN .308 AR-----TYPE RIFLESTYPE RIFLESTYPE RIFLESTYPE RIFLESTYPE RIFLES
Price as ShownRifle: ................................... 1699.95Upper Receiver Assembly (compatible
with .308 DPMS & Remington): . 999.95
FULTON ARMORY .308 Titan A4 UPR» Titan A4 Tactical Upper Receiver» Tactical Charging Handle Latch» 18” Barrel» Vortex Flash Suppressor» Yankee Hill Flip Front Sight for Rail» Yankee Hill Flip Rear Sight for Flattop» Titan Ergo Grip, Magpul CTR Stock» 1-12” Rail, 3-4” Rails, Sling Swivel for Rail» Length 36.5”-39.75”, Weight 9.55 lbs.
Price as ShownRifle: .......................................... 2240.95Upper Rceiver Assembly (compatible with
.308 DPMS & Remington): .............. 1540.95
FULTON ARMORY .308 Titan UPR» Slick Side Upper Receiver with Side Cocking» 22” Barrel with Target Grey Finish» Bennie Cooley Muzzle Brake» Titan SPR Pistol Grip, Magpul UBR Stock» Harris Bipod» Length 41”-43.75”, Weight 11 lbs.
Price as ShownRifle: ...................................... 2257.95Upper Rceiver Assembly (compatible with
.308 DPMS & Remington) ........... 1214.95
4
FULTON ARMORY 5.56/.223 Universal Battle Rifle (UBR)Fulton Armory 5.56/.223 UBR, Complete ................ 999.95Standard Features (See Options Right)Lower Receiver Group
» Fulton Armory 5.56 Lower Receiver» Forged and Milled by Military Contractor» Hard Coat Black Anodized per Mil Spec & Teflon Coated» “US RIFLE”-marked» Hand-Tuned Military Trigger» GI-Contractor Parts» CAR Stock on Carbine, A2 Stock on Rifle, & A2 Grip» 5- or 10- or 20- or 30-Round Magazine » Sling » Manual» Compatible with all Mil-Spec-Conforming Uppers. FFL Required
Upper Receiver Group» Fulton Armory A4 Flattop Upper Receiver with Numbered Rails» Forged and Hard-Coat Anodized per Mil-Spec» A2 Rear Sight on A2, Numbered Rails on Flattop» Includes Bolt and Bolt Carrier» GI Contractor Parts» Compatible with all Mil-Spec-Conforming Lowers
Barrel Group» Fulton Armory Criterion by Krieger» Legendary Fulton Armory Accuracy & Quality» Chambered for .223 Remington AND 5.56 x 45 NATO» 1x9 Twist, 4 Grooves, Button Rifled and Lapped
Group Options—Add for Hand Tuned, Polished and Installed 2 Stage
Non Adjustable NM Trigger ................................................... 125.00—Add for Hand Tuned, Polished and Installed
Geissele Adjustable 2 Stage NM Trigger;Specify DCM Service or DMR ................................................. 295.00
—Add for Command Arms CAR 6 Position Stock .......................... 20.00—Add for Magpul UBR/PRS/CTR Stock .................. 220.00/225.00/50.00—Add for Ergo Grip ..................................................................... 18.00—Add for SPR Grip ...................................................................... 23.00—Add for Magpul MIAD Grip ...................................................... 23.00
Upper Receiver Group ......................................................599.95
Upper Receiver Options—Add for A2 Upper Receiver with A2 Rear Sight ......................... 25.00—Add for Tactical Charging Handle Latch ................................. 20.00—Add For Rear Sight, Flip Up, for Flat Top (requires flattop upper)
Yankee Hill .......................................................................... 90.00Troy Industries, Black or Flat Dark Earth .............................. 140.00
—Add for Chrome-Lined Barrel and Chamber .......................... 50.00—Add for 16.5” M4-Contour Chrome-Lined Barrel ................... 50.00—Add for 18” Chrome-Lined HBAR ........................................... 50.00—Add for Vortex Flash Suppressor ............................................... 55.00—Add for JP Bennie Cooley Compensator ................................. 90.00—Add for Vortex Flash Suppressor ............................................... 55.00—Add for Yankee Windage Adjustable Flip Front Sight Gas Block 50.00
Handguard Options—Add for UBR Light Weight Four Rail Float Tube System
For 16.5” Carbine Barrels .................................................. 80.00for 18” or 20” Rifle Barrels ............................................... 120.00
Fulton Armory 5.56/.223 UPR, Complete ..............1099.95Standard Features (See Options Right)Lower Receiver Group
» Fulton Armory 5.56 Lower Receiver» Forged and Milled by Military Contractor, “US RIFLE” marked» Hard Coat Black Anodized per Mil Spec & Teflon Coated» Hand-Tuned Military Trigger» GI-Contractor Parts» CAR Stock on Carbine, A1 or A2 Stock on Rifle, & A2 Grip» 5- or 10- or 20- or 30-Round Magazine » Sling » Manual» Compatible with all Mil-Spec-Conforming Uppers. FFL Required
Upper Receiver Group» Fulton Armory Flattop Upper Receiver» Forged and Hard-Coat Anodized per Mil-Spec» A4 Military w/Numbered Rails, Ejection Port Cover and Forward Assist, or» Slick Side, Projection- and Snag-Free» Includes Bolt and Bolt Carrier» GI Contractor Parts» Compatible with all Mil-Spec-Conforming Lowers
Barrel Group» Fulton Armory Criterion by Krieger» Legendary Fulton Armory Accuracy & Quality» Chambered for .223 Remington AND 5.56 x 45 NATO» 1x9 Twist, 4 Grooves, Button Rifled and Lapped
» Forged Gas Block with Yankee-Hill Flip-Up Front Sight» ½” x 28 tpi Mil Standard Muzzle Threads with A2 Flash Suppressor» Guaranteed 1 MOA or Better, or Your Money Back!
Handguard Free Float Tube—Customize It the Way YOU Want, When You Want—Strong, Light Weight Aluminum Design with Steel Locking Ring—Rifle Length Allows for Plenty of Room for Hand & Rails—Front Handguard Stud w/Sling Swivel—Predrilled for Optional 2” to 12” Handguard Rails, Put Rails Where ...
Group Options—Add for Hand Tuned, Polished and Installed
2 Stage Non Adjustable NM Trigger ...................................... 125.00—Add for Hand Tuned, Polished and Installed
Geissele Adjustable 2 Stage NM Trigger;Specify DCM Service or DMR ................................................. 295.00
—Add for Command Arms CAR 6 Position Stock .......................... 20.00—Add for Magpul UBR/PRS/CTR Stock .................. 220.00/225.00/50.00—Add for Ergo Grip ..................................................................... 18.00—Add for SPR Grip ..................................................................... 23.00—Add for Magpul MIAD Grip ...................................................... 23.00
UPR Upper Receiver Group ...............................................699.95
Upper Receiver Options—Add for Side Cocking (Requires Slick Side Upper) ................... 100.00—Add for Tactical Charging Handle Latch ................................. 20.00—Add For Rear Sight, Flip Up, for Flat Top
Yankee Hill .......................................................................... 90.00Troy Industries, Black or Flat Dark Earth .............................. 140.00
Barrel Options—Add for Chrome-Lined Barrel and Chamber .......................... 50.00—Add for 16.5” M4-Contour Chrome-Lined Barrel ................... 50.00—Add for 18” Chrome-Lined HBAR ........................................... 50.00—Add for Kreiger 20” SS HBAR 1x7.75 or 1/13 twist barrel ......... 300.00—Add for Non-Reflective Target Grey Finish on Krieger ........... 35.00—Add for JP Bennie Cooley Compensator ................................. 90.00—Add for Vortex Flash Suppressor ............................................... 55.00
Handguard Free Float Tube Options—Add for Harris Bipod ............................................................... 80.00—Add for Handguard Free Float Tube Rails
2”, 3" and 4"/7”/12” ............................................. 20.00/27.00/40.00—Add for Sling Swivel for Rail (Requires Rail) .............................. 18.00
FULTON ARMORY 5.56/.223 Universal Precision Rifle (UPR)FULFULFULFULFULTON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICE
5
FULFULFULFULFULTON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICETON ARMORY 5.56/.223 RIFLES AND CARBINES—THE PROFESSIONALS’ CHOICE
The UBR brings that classic military look and configuration of the M16 and M4 into the 21st Century in semiauto form. Whether you prefer a rifleor carbine as close to authentic military as the law allows, or want a rifle or carbine that brings the classic AR-15/M16 into the self-defence, tactical andlaw enforcement world of today, you can configure a Fulton Armory 5.56/.223 UBR to meet your needs! With Fulton Armory you get those extra qualitytouches, such as our Criterion by Krieger barrels (Guaranteed under 1 MOA or your money back!) and our hand-polished and tuned triggers. EveryFulton Armory trigger installation, even our standard military trigger, is carefully performed by a skilled armorer to give you a crisp, light trigger pull. Youwon’t get that from the mass-produced production-line manufacturers! Let us help you design the UBR configuration that meets your wants and needs!
Don’t settle for a “one size fits nothing”; the Fulton Armory Universal Precision Rifle (UPR) is a dedicated precision rifle carefully configured to satisfy themost demanding precision shooter. The UPR is filled with Fulton Armory’s thoughtful custom touches. The UPR’s Slick Side Upper Receiver isreinforced to give the barrel a solid foundation with a clean, no-snag design. Our barrels are Criterion by Krieger, the finest production barrel available.The Side Cocking Option allows bolt cycling without breaking position and makes bolt charging effortless even with optics. The UPR’s standard militarytrigger is hand-polished and tuned, not just “dropped in on a wing and a prayer.” Every Fulton Armory trigger installation is carefully performed by askilled armorer to give you a crisp, light trigger pull. The UPR is designed to meet the needs of the Precision Shooter; rather than a collection of “tacticalleftovers.” The UPR is built by craftsmen who know what the Precision rifleman/rifewoman needs, and delivers the quality and performance you expectfrom Fulton Armory.
Guaranteed under 1 MOA, or your money back!
FULTON ARMORY 5.56/.223 UPR RIFLE» Slick Side Upper Receiver with Side Cocking» 18” Chrome-Moly Chrome-Lined HBAR Barrel» Ergo Grip, Magpul UBR Stock» Bernie Cooley Chrome Moly Compensator» Troy Flip-Up Rear Sight» Harris Bipod» Length 35.5”-38.25”, Weight 9.6 lbs.
Lower Receiver Group» Fulton Armory 5.56 Lower Receiver» Forged and Milled by Military Contractor, “US RIFLE” marked» Hard Coat Black Anodized per Mil Spec & Teflon Coated» Hand-Tuned, Polished and Lapped Military Trigger» GI-Contractor Parts» A1 or A2 Stock & A2 Grip» 5- or 10- or 20- or 30-Round Magazine » Sling » Manual» Compatible with all Mil-Spec-Conforming Uppers. FFL Required
Upper Receiver Group» Slick Side Flattop Upper Receiver, Projection- and Snag-Free» Thick Walled for Strength, Rigidity and Accuracy» Forged and Hard-Coat Anodized per Mil-Spec» Includes Bolt and Bolt Carrier» GI Contractor Parts» Compatible with all Mil-Spec-Conforming Lowers
Barrel Group» Legendary Fulton Armory Accuracy & Quality» Chambered for 5.56 and .223 Remington» 1x12 Twist, 4 Grooves, Button Rifled and Lapped
PVR Light:» 20” 1 x 12 Stainless Steel HBAR Barrel» .750” Gas Block, No Set Screws, Compression Fit, Won’t Shoot Loose» ½” x 28 tpi Mil Standard Muzzle Threads with A2 Flash Suppressor
PVR Heavy:» 24” 1 x 12 Stainless Steel Bull Barrel, Non-Threaded Target Muzzle» .936” Gas Block, No Set Screws, Compression Fit, Won’t Shoot Loose» Guaranteed ¾ MOA or Better, or Your Money Back!
—Add for Hand Tuned, Polished and Installed2 Stage Non Adjustable NM Trigger ...................................... 125.00
—Add for Hand Tuned, Polished and InstalledGeissele Adjustable 2 Stage NM Trigger;Specify DCM Service or DMR ........................................... 295.00
—Add for Command Arms CAR 6 Position Stock .................... 20.00—Add for Magpul UBR/PRS/CTR Stock ......... 220.00/225.00/50.00—Add for SPR Butt Plate Adjustable for Cant and Drop
A1 or A2 Stock ................................................................. 45.00—Add for Ergo Grip .............................................................. 18.00—Add for SPR Grip ............................................................... 23.00—Add for Magpul MIAD Grip ................................................. 23.00
PVR Light Upper Receiver Group ............................. 599.95PVR Heavy Upper Receiver Group ........................... 624.95
Upper Receiver Options—Add for Side Cocking ....................................................... 100.00—Add for Tactical Charging Handle Latch ............................ 20.00
Barrel Options—Add for Krieger 20” 1 x 13 Single Point Cut Barrel ........ 300.00—Add for Non-Reflective Target Grey Finish ........................ 35.00—Add for JP Bennie Cooley Compensator (PVR Light) .......... 90.00—Add for Vortex Flashh Suppressor (PVR Light) ....................... 55.00
Handguard Free Float Tube Options—Add for Harris Bipod ......................................................... 80.00
FULFULFULFULFULTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VARMINT/MAARMINT/MAARMINT/MAARMINT/MAARMINT/MATTTTTCH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!
FULTON ARMORY 5.56/.223 DCM/CMP NM RifleMilitary A2 Upper receiver allows rock solid fitting and full elevation adjustment for the finest installed NMA2 sights available anywhere-unlike
detachable carry handle sights.Fulton Armory 1x8 CM HBAR match barrel, (legendary Fulton Armory accuracy), Criterion by KriegerHybrid chamber geometry (like all Fulton Armory rifles) allows use of .223 rem and 5.56 NATO.Windage adjustable forged front sight base, not simply pinned-allows you to get your best windage zeroes.Northern competition ¼ x ¼ NMA2 milled rear sight assembly w/.036 aperture, accepts lenses. The Northern Competition service rifle match sight
is the only unit built as a true ¼ x ¼ match quality sight. The Northern Competition sight is not a collection of re-machined add-ons to a standard A2/E2rear sight. It’s built from bar stock, using 12L14 steel. This steel is known for its fine machining characteristics, critical for holding tolerance. Thetolerances, design and quality result in a system that will allow AR-15s to have a true and dependable rear sight with no additional money spent onfitting, parts replacement, or accessories. The Northern Competition is fully engraved and fully finished. The threads and screw shoulders are preciselysized to reduce play. These are true click values that are expressed as inches at 100 yards (not minutes of angle). This ¼ inch rear sight will movegroup center ¼ inch at 100 yards. If it doesn’t say Northern Competition on it—it’s not.
Fulton Armory precision NMA2 rear sight pillar system installed standard-rock solid-not floppy-sits straight-not crooked with ghosting like most-for arazor sharp sight picture
Metal butt plate door assembly not plastic-will not fall apart with practice or when using lead weights; metal butt stock spacer-won’t compress andloosen butt stock hold.
Fiberglass USGI A2 handguards, not inferior commercial injected plastic. Won’t warp, melt or break.Gas tube painstakingly adjusted for perfect fit and optimum accuracy over the heating heating/cooling cycle.Front sight post locked solid with set screw from below-sight cannot bob, turn or cant.Full hammer ramp on bolt carrier for superlative durability and smoothness.Heavy Duty extractor spring for durability and reliability.Each rifle is handcrafted one at a time on a bench. No assembly lines, or assembly workers.Guaranteed sub .75 MOA, or your money back.Comes with standard mil trigger group for those that already have a trigger they like/use;
add 125.00 for 2 stage non-adjustable match trigger, or, 295.00 for 2 stage adjustable Geissele, match trigger.Our match trigger installations are painstakingly lapped, stoned, polished and perfectly adjusted for “glass rod” performance. Set to lift 4.5
pounds.
Rifle, 1274.95with two USGI 20-rnd mags (or commercial 10-rnds where legally required), Silent Sling, User’s Manual, includes Federal Excise Tax; FFL Required
Upper: 899.95
7
FULTON ARMORY .223 PVR HEAVY RIFLE» Slick Side Upper Receiver» 24” 1 x 12 Stainless Steel Bull Barrel» Target Muzzle—No Threads» A2 Pistol Grip, A2 Stock» Sling Swivel Stud and Swivel» Length 42.5”, Weight 9.2 lbs.
Price As Shown: 1049.95 (FFL Required)Upper Price As Shown: ..........624.95
FULFULFULFULFULTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VTON ARMORY 5.56/.223 VARMINT/MAARMINT/MAARMINT/MAARMINT/MAARMINT/MATTTTTCH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!CH RIFLES—DEMAND THE BEST!—WINNER, GUN TESTS PRECISION AR-15 SHOOTOFF—
Don’t settle for a “one size fits nothing; the Fulton Armory Predator Varmint Rifle is a dedicated precision rifle carefully configured to fulfill the mostdemanding accuracy needs.
The PVR’s Slick Side Upper Receiver is reinforced to give the barrel a solid foundation with a clean, no-snag design.The Side Cocking Option allows bolt cycling without breaking position and makes bolt charging effortless even with optics.The PVR’s barrels are rifled with 1 x 12” twist, hard to find but perfect for the medium and light weight bullets needed for varmint shooting.The PVR’s Standard Military Trigger is hand-polished and tuned, not just ‘dropped in with a wing and a prayer.” Every Fulton Armory trigger
installation is carefully performed by a sklled armorer to give you a crisp, light trigger pull.The PVR is designed to meet the needs of the Varmint and Precision Shooter; rather than a collection of “tactical leftovers,” the PVR is built by
craftsmen who know what the Varmint and Precision rifleman/rifewoman needs, and delivers the quality and performance you expect from Fulton Armory.Guaranteed under ¾ MOA, or your money back!
FULTON ARMORY .223 PVR HEAVY RIFLE» Slick Side Upper Receiver with Side Cocking» 24” 1 x 12 Stainless Steel Bull Barrel» Target Muzzle—No Threads» SPR Grip, Magpul UBR Stock» Length 39.5”-42.25”, Weight 9.6 lbs.
Price As Shown: 1392.95 (FFL Required)Upper Price As Shown: .......... 724.95
FULTON ARMORY .223 PVR LIGHT RIFLE» Slick Side Upper Receiver with Side Cocking» 20” 1 x 12 Stainless Steel HBAR Barrel» Target Grey Finish» Ergo Grip, A1 Stock with SPR Adjustable Butt Plate» Bernie Cooley Chrome Moly Compensator» Harris Bipod» Length 40”-43”, Weight 9.5 lbs.
Price As Shown: 1367.95 (FFL Required)Upper Price As Shown: .......... 824.95
Standard Configuration!Price As Shown: 1274.95 (FFL Required)Upper Price As Shown: ......... 899..95
8
M14 AUTHENTIC SERVICE RIFLE—As Close to the Original as You Can GetFULTON ARMORY M14 SERVICE RIFLE—As Close to the Original as You Can Get!—Call for Availability FFL Required .......... 2499.95• Fulton Armory M14 Receiver• Fulton Armory GI Contour Walnut Stock• 22” or 18.5” 1x12 NM-Quality Barrel, Chrome-Lined!• USGI and True Mil-Spec Parts• Twenty-Round Magazine • Manual • Sling• Lovingly Built One at a Time• 30 Day Money Back Guarantee• Call for Options & Delivery
M14 PEERLESS RIFLE—Match/Target Rifle Perfection!
Built on Our Fulton Armory Threaded Rear Lug Receiver, with Fulton Armory Medium Weight 1 in 10 Stainless Steel Barrel• Rear Lug is Bolted to the Stock! Don’t settle for rifles without a threaded, bolted receiver lug.• New Fulton Armory NM Walnut Stock with Flawless Glass Bedding, Front End Mod and Handguard Mod• Fulton Armory NM MW SS Barrel—add 35 for Target Gray Finish • Includes .062 NM Front Sight and .052 or .0595 (Specify) NM Aperture• NM Trigger Modification • NM Flash suppressor • NM Gas System • NM Op Rod Spring Guide • Ten-Round Magazine• NM Front Swivel • Manual • 30 Day Money Back Guarantee • Lovingly Built One at a Time • Call for Options & Delivery
M14 SOCOM RIFLES
M14 RIFLES—Built on Our Fulton Armory M14 Receiver
—21st Century M14! FFL Required ................................. 3554.95• Black with Black Furniture, or Flat Dark Earth with Tan Furniture• Fulton Armory M14 Receiver• Fulton Armory NM-Quality 18.5” or 22” 1x12 Barrel, Chrome-Lined!• Fulton ARmory SOPMOD Stock Chassis (Troy MCS)• Magpul PRS Fully Adjustable (comb height & length of pull) Stock• Magpul MIAD Pistol Grip System• True Vortex® DC Flash Suppressor• USGI and True Mil-Spec Parts• Ten-Round Magazine • Manual• Lovingly Built One at a Time • 30 Day Money Back GuaranteeOptions Include:• Add for Flip-up Detachable Front/Rear Sights
—Troy, Black or Flat Dark Earth, 120/140—Yankee Hill, Black, 80/90
• Add for Harris Bipod w/ARMS QD Rail Mount, 190• Add for Magpul Grip Insert, f/2 AA/AAA or 2 CR123 Batteries, 20• Add for QD Sling Swivel for Stock Side Swivel Sockets, ea., 15Rifle Weights:• Fulton Armory M14 SASS Rifle w/18.5” Barrel: 11.45 lbs• Fulton Armory M14 CQB Rifle w/18.5” Barrel: 10.65 lbs• Fulton Armory M14 DMR Rifle w/22” Medium Weight Barrel: 12 lbs
FULTON ARMORY M14 SOCOMDesignated Marksman Rifle—FFL Required ........................ 3369.95• As CQB, but with A2 Stock and PIstol GripOptions Include:• Add for CVT Adjustable Cheek Piece, 75• Sight, Bipod & Swivel Options same as SASS
FULTON ARMORY M14SOCOM CQB RIFLE—FFL Required ....................... 3394.95• Black w/Black Furniture, or Flat Dark Earth
w/Tan Furniture• Fulton Armory M14 Receiver• FA NM 18.5” or 22” 1x12 Barrel,
Chrome-Lined!• Fulton Armory SOPMOD Stock Chassis (Troy MCS)• Command Arms CBST Collapsible Ambi Stock• Magpul MIAD Pistol Grip SystemOptions Include:• Optional Command Arms Ambidextrous Adjustable Cheek Piece, 30• Other Features and Options same as SASS
Shown w/CVTCheek Piece
Shown w/CAACheek Piece
FULTON ARMORY M14 SOCOM RIFLES: SASS, CQB and DMR• Outward M16 appearance, not seen as a high priority target • Stock in-line with muzzle, significant reduction of felt recoil & muzzle rise• Full length top rail, easily & properly mounts any optic, including ACOGs • Field strips via standard M16 rear pushpin, no tools needed• 49" of top, bottom side rails, accepts all M1913 rail accessories including M203 • Proprietary mechanical bedding, no fiberglass bedding• Integrated QD Side Sling Swivel Mounts, no need to purchase sling swivel rail mounts
FULTON ARMORY M14 PEERLESS MATCH/TARGET RIFLE—Uncompromsing Beauty and Performance—Call for Availability
Shown in Flat Dark Earth with optional Troy folding front & rear sightsand optional 20-round magazine
9
M1 GARAND RIFLES
Fulton Armory M1 Service Rifle, .270, .308 or .30-'06—Winner of the Gun Tests Garand Shoot-out! FFL REQ'D! ....................1699.95• USGI Receiver, New Fulton Armory Military Contour Barrel and GI Parts—specify .270 .308 or .30-’06,• New Walnut Stock and Handguards Options:• Clip —Add 55 for Chrome Bore and Chamber• Manual —Add 350 for Krieger Military-Contour Barrel• Sling —Add 750 for Complete M1C setup with G&H Mount and 1” Rings• Lovingly Built and Finished by Hand —Add 65 for National Match Trigger Modification• 30 Day Money Back Guarantee;• Call for Options and Delivery Time
Fulton Armory M1 “Tanker Garand,” .270, .308 or .30-'06, FFL REQ'D! ................................................................................1799.95• USGI Receiver, New Fulton Armory “Tanker” Barrel and GI Parts—specify .270 .308 or .30-’06,• New Walnut Stock and Handguards Options:• Clip • Manual • Sling —Add 55 for Chrome Bore and Chamber• Lovingly Built and Finished by Hand —Add 65 for National Match Trigger Modification• 30 Day Money Back Guarantee • Call for Options and Delivery Time
Fulton Armory M1 Peerless NM Rifle, .308, or .30-'06, FFL REQ'D! ........................................................................................2199.95• Built with USGI Receiver, Fulton Armory Military Contour Standard Weight National Match Barrel and GI Parts—specify .308 or .30-’06• New Walnut Stock and Handguards Options:• NM .062 Front & Rear .0520 or .0595 Aperture (Specify) —Add 350 for Krieger Military Contour National Match Barrel• Flawless Glass Bedding with NM Front End Modification —Add 750 for Complete M1C Setup with G&H Mount and 1” Rings• National Match Trigger Mod• Clip • Manual • Sling• Lovingly Built & Finished by Hand • 30 Day Money Back Guarantee • Call for Options and Delivery Time
M1 CARBINE RIFLES
Fulton Armory Service Grade M1 Carbine, FFL REQ'D! Cal. .30 Carbine ............................................................................... 1199.95Out of the time machine!! Built with Original USGI Receiver, New Fulton Armory barrel and GI Parts, Beautifully FinishedNew Walnut Stock & Handguard; One fifteen-round magazine, Sling & Oiler, ManualLovingly Built & Finished by Hand, 30 Day Money Back Guarantee; Call for Options and Delivery Time
Carbine Match Legal! Winner of the Gun Tests Carbine Shootoff!
ACTION-PACKED US MILITARY DVDs!M1 and M2 Carbine
26 min/b&w—“The M1 Carbine & the M2 Carbine” wasfilmed in the 1950’s in black & white and was producedby the US ARMY as a instructional video on the basicworking operation of both the M1 and M2 carbine. It isfilled with fascinating instructional scenes of how theserifles work. Using a giant-sized replica, an Armyinstructor shows all the inner workings of the M1 andM2.
US Army Small Arms Weapons in WWII40 min/b&w—The Fundamentals of Small ArmsWeapons, filmed in the 1950’s; it is an instructionalvideo on the basic working operation of a M1 Garandrifle. The video covers many other types of small armsincluding the BAR., M3, .45 pistol, and .50 calibermachine gun. This is a fascinating instructional videoon how a gun really works. Using a giant-sized replica,an Army instructor shows the inner workings of theseguns.
More than entertainment, these official training films from WWII and the Vietnam era are true pieces of history, filled with information you can use.
Any one video, 24.95; Any two videos, save ten bucks! Only 39.95
10
LOWER RECEIVER ASSEMBLIES
Our Parts Are Compatible with DPMS and Remington .308 AR RiflesLower Receiver, Stripped, Fulton Armory .308, Milled from Solid Billet of
6061-T6 Aluminum, Hard Coat Black Anodized per Mil Spec & TeflonCoated. (Fits DPMS & Remington .308 Uppers) FFL Required ...... 349.95As Above in Quantities of 10 or more ........................................ 299.95
Lower Receiver Parts Kit for Fulton Armory .308 Receiver (Fits DPMS &Remington .308’s) ...................................................................... 79.95—Includes Heavy Duty Bolt Catch, Hammer, Trigger, Disconnector,
Safety Selector, Front Pivot Pin, Rear Takedown Pin, Mag Catch, BufferRetainer, all Pins, Springs & DetentsAs Above in Quantities of 10 or more ...................................... 64.95
Lower Receiver Parts Kit as aboveLess Hammer, Trigger, and Disconnector ..................................... 39.95
As Above in Quantities of 10 or More .............................................. 34.95—Add for Rock River 2 Stage Non Adjustable Trigger Kit ............. 130.00—Add for Geissele Fully Adjustable 2 Stage DMR
or DCM Trigger Kit ................................................................ 300.00Lower Receiver Stock Group Kit, A1, for Fulton Armory .308 (Fits DPMS &
Remington .308’s) ...................................................................... 99.95—Includes New Design A1 Butt Stock (5/8" Shorter Than A2), A1 Butt
—Add for MagPul PRS Stock ...................................................... 230.00Lower Receiver Stock Group Kit, CAR, for Fulton Armory .308 (Fits DPMS &
Remington .308’s) ...................................................................... 99.95—Includes 6 Position Collapsible CAR Stock, Buffer Tube, .308 Titan
Carbine Buffer & Spring—Add for Command Arms CAR 6 Position Stock ...................... 20.00—Add for MagPul CTR Stock .................................................... 80.00—Add for MagPul UBR Stock .................................................. 225.00
Lower Receiver Group Complete, Fulton Armory .308,with Military Trigger .................................................................. 574.95—A1, A2 or CAR Stock & A2 Grip Fully Assembled & Tested By
Fulton Armory. Fits DPMS & Remington Uppers. FFL Required—Add for Command Arms CAR 6 Position Stock .......................... 20.00—Add for Magpul UBR Stock ..................................................... 220.00—Add for Magpul PRS Stock ...................................................... 225.00—Add for Hand Tuned, Polished and Installed 2 Stage
Non Adjustable NM Trigger ................................................... 125.00—Add for Hand Tuned, Polished and InstalledGeissele Adjustable 2 Stage
NM Trigger; Specify DCM Service or DMR .............................. 295.00For Above Stock Groups:—Add for Titan SPR Grip ......................................................... 23.00
LOWER RECEIVER PARTSOur Parts Are Compatible with DPMS and Remington .308 AR RiflesBolt Catch, .308 Titan, Heavy Duty .................................................. 14.95Bolt Catch Buffer ............................................................................... 1.95Bolt Catch Screw, .308 Titan ............................................................. 5.95Bolt Catch Spring ................................................................................ .50Buffer, .308 Titan Rifle, for A1/A2-Dimension Buffer Tube ................ 24.95Buffer, .308 Titan Carbine, for CAR-Dimension Buffer Tube ............... 34.95Buffer Retainer and Spring ................................................................. 1.95Buffer Spring, .308 Titan Rifle, for A1/A2-Dimension Buffer Tube ........ 9.95Buffer Spring, .308 Titan Carbine, for CAR-Dimension Buffer Tube ...... 9.95Buffer Tube, Rifle ............................................................................ 19.95Buffer Tube, Carbine, 6 Position, Commercial Dimension ................. 26.95Buffer Tube, Carbine, 6 Position, Mil-Spec Dimension ....................... 49.95Buffer Tube Lock Ring, Carbine .......................................................... 4.95Buffer Tube Lock Plate ....................................................................... 4.95Butt Plate, A1/ Butt Plate, A2 .................................................... 4.95/3.95Butt Plate Door Assembly w/Hinge & Pin, Metal Not Plastic ............... 19.95Butt Stock, New Style A1, 5/8" Shorter Than A2, Stripped ................. 24.95Butt Stock, A2, Stripped ................................................................... 19.95Butt Stock Screw, A1, Lower/Upper ........................................... 2.95/2.95Butt Stock Screw, A2, Lower/Upper ........................................... 2.95/2.95Butt Stock Spacer, A2, Aluminum Not Plastic ...................................... 4.95
Butt Stock Assembly Group, .308 Titan MagPul UBR ....................... 324.95—Includes .308 Titan CAR Buffer & .308 Buffer Spring
Disconnector/Disconnector Spring ..............................................5.95/.95Front Pivot Pin, .308 Titan ................................................................. 6.95Front Pivot Pin Detent and Spring ....................................................... 1.95Hammer, Standard/Hammer Pin/Hammer Spring ........... 19.95/.95/1.50Lower Receiver, Stripped, Fulton Armory .308 Titan ....................... 349.95
—Milled from Solid Billet of 6061-T6 Aluminum, Hard Coat BlackAnodized per Mil Spec & Teflon Coated. (Fits DPMS & Remington.308 Uppers) FFL Required
Magazine Catch/Button/Spring ......................................... 4.95/2.95/.95Pistol Grip, A2/Pistol Grip Screw with Washer .............................. 5.95/.95Pistol Grip, .308 Titan SPR .............................................................. 24.95Rear Takedown Pin, .308 Titan ......................................................... 6.95Rear Takedown Pin Detent and Spring ............................................... 1.95Safety Selector/Safety Selector Detent and Spring ...................... 9.95/1.95Trigger, Standard/Trigger Pin/Trigger Spring ...................... 14.95/.95/.75Trigger, Rock River, Two Stage, Non Adjustable ............................... 129.95Trigger, Geissele, Fully Adjustable, Two-Stage Match Trigger .......... 299.95
—Specify DCM Service Rifle (3.0 to 5.0 lbs) or DMR Rifle (1.8 to 4.0 lbs)
UPPER RECEIVER PARTSOur Parts Are Compatible with DPMS and Remington .308 AR RiflesUpper Receiver, Fulton Armory .308 Titan Slick Side, Stripped ........ 129.95
—Machined from 6066-T6 Extruded Aluminum Alloy—Thick Walled for Strength, Rigidity and Accuracy—No Ejection Port Cover—No Forward Assist—No Case Deflector—Clean No Snag Design—Hard Coat Black Anodized per Mil Spec & Teflon Coated.—Fits DPMS & Rem .308 Lowers
Upper Receiver, as Above, Slotted for Side Cocking ........................ 204.95—Requires Fulton Armory .308 Titan Side Cock Carrier:—Add for Stripped .308 Side Cock Chrome Bolt Carrier
with Steel Handle & Screw ...................................................... 224.95—Add for above with Gas Key Installed ..................................... 234.95—Add for Above with .308 Complete Bolt Carrier Group ............ 324.95—Everyone Loves Our Side Cocking Mod, Including Gun Tests!
Upper Receiver, Fulton Armory .308 Titan Tactical A3, Stripped ...... 159.95—Machined from 6066-T6 Extruded Aluminum Alloy—Thick Walled for Strength, Rigidity and Accuracy—Accepts Forward Assist, Port Cover and has Case Deflector—Hard Coat Black Anodized per Mil Spec & Teflon Coated
Barrel, Fulton Armory .308 Titan 16.5" or 18.5" Stainless .............. 299.95—Add for Target Gray Finish ....................................................... 35.00—Legendary Fulton Armory Accuracy & Quality—Medium Weight Contour for Reduced Weight—Uses Rifle Length Gas Tube Design for Reliability, Accuracy & Durability—5/8X24 Threaded Muzzle—.936" Gas Block Diameter—1X10 Twist, 4 Grooves, Button Rifled and Lapped—Includes Barrel Extension—Criterion by Krieger—Chambered for .308 Win AND 7.62X51 NATO .................................—Weights: 16.5”, 2.7 lbs.; 18.5”, 3.0 lbs.
11
Barrel, Fulton Armory .308 Titan 20" or 22" Stainless ..................... 319.95—Add for Target Gray Finish on Titan Barrels ............................... 35.00—Legendary Fulton Armory Accuracy & Quality—Heavy Weight Contour for Rigidity and Accuracy—Uses Rifle Length Gas Tube Design for Reliability, Accuracy & Durability—5/8X24 Threaded Muzzle—.936" Gas Block Diameter—1X10 Twist, 4 Grooves, Button Rifled and Lapped—Includes Barrel Extension—Criterion by Krieger—Chambered for .308 Win AND 7.62X51 NATO—Weights: 20”, 3.7 lbs.; 22”, 4.0 lbs.
Barrel, Fulton Armory .308 Titan, 18.5", Chrome Bore ................... 319.95—Perhaps THE Perfect Barrel for Most Users—Legendary Fulton Armory Accuracy & Quality—No Accuracy Loss with our Chroming Process—Light Weight Contour for Lowest Possible Weight—Chrome Moly Steel for Strength and Durability—Manganese Mil Spec Phosphate Finish—Uses Rifle Length Gas Tube Design for Reliability, Accuracy & Durability—.750" Gas Block Diameter—5/8"X24 Threaded Muzzle—1X10 Twist, 4 Grooves, Button Rifled and Lapped—Includes Barrel Extension—Criterion by Krieger—Chambered for .308 Win AND 7.62X51 NATO—Weight: 2.5 lbs.
Barrel, Fulton Armory 6.5 Creedmore, 26", Stainless ..................... 649.95—Legendary Fulton Armory Performance—Heavy Contour 26" Length for Long Range Precision—Full Target Crown, No Muzzle Thread—1x7.75 Twist, 4 Grooves, Single Point Cut Rifling—Includes Barrel Extension—.936" Gas Block Diameter—.920” Muzzle Diameter, Accepts All the Best
Match AR-15 Gas Blocks, Fron t Sight Bases and Bloop Tubes—Made for Fulton Armory by Krieger Barrels—Weight: 5.25 lbs.
Barrel Extension, Fulton Armory .308 Titan ...................................... 49.95Bolt, Stripped, .308 Titan ................................................................ 99.95Bolt, Complete, .308 Titan ............................................................ 139.95Bolt Cam Pin .................................................................................... 9.95Bolt Carrier, .308 Titan, Stripped, Hard Chromed ........................... 159.95Bolt Carrier Group, .308 Titan, Complete with Bolt ........................ 259.95Bolt Carrier Key with Screws ............................................................. 9.95Bolt Gas Ring, .308 Titan, Each ......................................................... 2.95Charging Handle Assembly, .308 Titan ........................................... 49.95Charging Handle Latch, Ambidextrous ............................................. 18.95Charging Handle Tactical Latch ....................................................... 19.95Ejection Port Cover, .308 Titan Tactical A3 Upper ............................. 19.95Ejection Port Cover Pin, .308 Titan Tactical A3 Upper ......................... 1.95Ejection Port Cover Spring ................................................................. 1.00Ejection Port Cover Snap Ring ............................................................. .50Ejector with Spring, .308 Titan .......................................................... 4.95Ejector Roll Pin, .308 Titan .................................................................. .95Extractor, .308 Titan ....................................................................... 39.95Extractor Pin, .308 Titan ................................................................... 1.95Extractor Spring Assembly, .308 Titan ............................................... 2.95Firing Pin, Chrome, .308 Titan ....................................................... 14.95Firing Pin Retainer, Chrome, .308 Titan ............................................. 5.95Flash Suppressor, .308 Titan A2, 5/8X24 Thread ............................ 19.95Flash Suppressor Crush Washer, 5/8", .308 Titan .............................. 4.95Flash Suppressor, Vortex. 308 Titan, 5/8X24 Thread ....................... 99.95Forward Assist Assembly, Includes Pin & Spring ............................... 10.95Front Sight, Folding with Integral Gas Block, .308 Titan, Steel, .750 . 99.95Front Sight, Folding, for Handguard Rail, Yankee Hill ........................ 79.95Front Sight, Folding, for Handguard Rail, Troy Industries .................. 119.95Gas Block, .750, Compression Fit .................................................. 49.95Gas Block, .936, Compression Fit .................................................. 49.95Gas Tube, Rifle Length .................................................................... 12.95Gas Tube Pin .................................................................................... .50
—Customize It the Way YOU Want, When You Want—Strong, Light Weight Aluminum Design—Rifle Length Allows for Plenty of Room for Hand & Rails—Steel Locking Ring—3 Piece Design is Fully Index Able—Predrilled for Optional Handguard Rails—Put Rails Where You Want, and Not Where You Don’t—Rails from 3"-12" Available—Weight: 1.0 lb.
Rear Sight, Flip Up, for Flat Top, Yankee Hill .................................... 89.95Rear Sight, Flip Up, for Flat Top, Troy ............................................. 139.95Sling Swivel, QD Push Button, Heavy Duty, Large for 1.25" Sling ......... 9.95Sling Swivel, Bolt On, for Rail .......................................................... 19.95
TITAN ACCESSORIES & TOOLSAccuwedge ...................................................................................... 5.95Bipod, Harris, 1A2-L, No Mount ...................................................... 79.95Bipod Mount for Rail, Synthetic, Requires Bottom Rail ........................ 29.95Bipod Mount for Rail, Aluminum, Requires Bottom Rail ...................... 39.95Bipod Mount for Rail, ARMS QD, Requires Bottom Rail ..................... 109.95Bore Brush ....................................................................................... 1.95Case Deflector ............................................................................... 19.95Chamber Cleaning Brush, Titan ........................................................ 5.95Chamber Cleaning Tool, Titan, Includes Chamber Brush .................. 17.95Chamber Cleaning Kit, Titan, Includes Tool and Chamber Brush ....... 39.95Cleaning Patches, Tetra ProSmith, 300 .............................................. 7.95Cleaning Rod, Tetra ProSmith, 29"/36" ................................. 23.95/24.95Cleaning Rod Breech Guide, Titan ................................................... 29.95Gas Key Mops, 17", Pack of 20 ......................................................... 5.95Magazine, .308 Titan, 4, 9 or 19 Round .......................................... 39.95
—Compatible with DPMS, Remington & Knight .308’s!Scope Ring Reducers, 30mm to 1", Steel ......................................... 39.95Vertical Front Grip, Twist Lock QD ................................................... 24.95
TITAN and AR-15 BOOKS
The Titan FAR.308 User’s Guide ................................................... 4.95—Provides the Titan owner with the basic information needed to safely &
properly operate and maintain Titan Rifles.—This is the User’s Guide supplied with every new Titan Rifle
The AR-15 Complete Owner’s Guide, by Kuleck & Duff ............... 22.95—Provides the new or experienced AR-15® owner with the needed in-
depth knowledge to configure, select, operate, maintain andtroubleshoot AR Type Rifles.
The AR-15 Complete Assembly Guide, by Kuleck & McKee .......... 19.95—The key to servicing your AR Type Rifle! Goes far beyond the military
manuals in depth & scope, using words & 600 pictures to clearly guideyou through every operation required to service and maintain your AR-Type Rifle.
Handloading for Competition, by Zediker .................................... 31.95—THE must read book for handloaders.—Details common errors that can kill you!
—Incredible Lock Time! Specify Service or Match Rifle ............. 299.95Trigger, Mil. Spec., Not Chinese .................................................... 12.95Trigger, Large Hole f/Colt, Mil. Spec., Not Chinese ......................... 24.95Trigger Pin, Small/Large, for Colt .............................................. .95/4.95Trigger Pin, Small, slightly oversize for worn receivers ...................... 4.95Trigger Spring .................................................................................. .95Trigger Guard Assembly, Aluminum, w/Pin ..................................... 6.95Trigger Guard Assembly, Winter, Aluminum, Very Cool! ................. 12.95Trigger Guard Pin ............................................................................. .50
Barrel, Douglas, 16” NM, 1x9 CM, .920 Bull Barrel, Plain Muzzle . 349.95Barrel, Krieger, 20” NM Heavy Contour, SS, 1x7.75 or 1x13,
Specify Threaded or Plain Muzzle ............................................ 499.95—24” .812” 1x7.75 SS, or 26” .920” 1x7.75 SS Bull ................. 549.95—Add 35.00 to any Stainless Steel Barrel for Target Gray Finish
Specify .812 or .920 ................................................................ 79.95Bolt, Complete, USGI/with HD Extractor Spring ................... 49.95/54.95Bolt Cam Pin .................................................................................. 4.95Bolt Carrier, M16, GI, Stripped ...................................................... 59.95Bolt Carrier, AR-15, GI, Stripped .................................................... 59.95Bolt Carrier, AR-15 “Slick Side,” no Forward Assist notches,
Parkerized, Stripped/Hard Chrome Plated, Stripped ....... 69.95/89.95Bolt Carrier, AR-15, GI, Stripped, Modified for side cocking,
includes bolt handle ................................................................ 109.95Bolt Carrier Group Complete, GI, w/Bolt, Complete ..................... 129.95
—Add for HD Extractor Spring ..................................................... 5.00Bolt Carrier Group Complete, w/Bolt, Complete
Slick Side Carrier, Parkerized/Hard Chromed Carrier .. 149.95/169.95—Add for HD Extractor Spring ..................................................... 5.00
Bolt Carrier Key w/Screws .............................................................. 9.95Bolt Gas Rings, Set of 3 ................................................................... 1.95
AR-15 PARTS, ACCESSORIES & TOOLSLower Receiver GroupLower Receiver, Stripped, Fulton Armory, Forged by GI Contractor,
Lower Receiver Parts Kit ................................................................ 59.95Bolt Catch ...................................................................................... 6.95Bolt Catch, Extended, Delrin ......................................................... 22.95Bolt Catch, Extended, Aluminum .................................................. 34.95Bolt Catch, Special, for Accutron Only ............................................ 69.95Bolt Catch Buffer/Pin/Spring ............................................... 1.95/.50/.50Buffer, Specify for Rifle or CAR ....................................................... 14.95Buffer, CAR, M4, Extra Heavy, Tungsten .......................................... 44.95Buffer Retainer w/Spring ................................................................. 1.95Buffer Spring, Specify for Rifle or CAR .............................................. 4.95Buffer Tube................................................................................... 19.95Butt Plate, A1/Butt Plate Door Assembly, A2 .......................... 6.95/19.95Butt Plate, A2/Butt Plate Door Assembly, A2 .......................... 4.95/19.95Butt Plate, Guardian, Adjustable Length of Pull, Cant & Drop ................ 59.95Butt Stock, A1, New, Stripped, Black or Tan .................................... 19.95Butt Stock Assembly, A1, New, Black or Tan ................................... 49.95Butt Stock Assembly Group, A1, New, Complete, Black or Tan,
Includes Buffer Tube & Parts ...................................................... 79.95Butt Stock, A2, New, Stripped, Black or Olive Drab ......................... 19.95Butt Stock Assembly, A2, New, Black or Olive Drab ....................... 49.95Butt Stock, Magpul PRS, uses A2 buffer tube ................................. 249.95Butt Stock Assembly Group, A2, New, Complete, Black or Olive Drab,
Includes Buffer Tube & Parts .......................................................... 84.95Butt Stock, Arched Skeleton, w/ambi QD swivel sockets, SPECIAL ......... 69.95Butt Stock Assembly Group, CAR, fixed .............................................. 69.95Butt Stock Assembly Group, M4, 6-Position, Black, OD or Tan .............. 69.95Buttstock Assy. Group, Command Arms 6-Position, Ambi, Black or Tan .. 89.95
—Adjustable Cheekpiece, Ambi, for CA stock ................................. 29.95Butt Stock Extender w/ambi QD swivel sockets, adds 2” SPECIAL ... 34.95Butt Stock Screw, A1, Upper/Lower ......................................... 2.95/2.95Butt Stock Screw, A2, Upper/Lower ......................................... 2.95/1.95Butt Stock Spacer, Aluminum........................................................... 6.95Butt Swivel ..................................................................................... 4.95Disconnector, small hole/Large Hole f/Colt ............................. 5.95/9.95Disconnector Spring ......................................................................... .75Front Pivot Pin/Detent w/Spring ............................................. 3.95/1.95Front Pivot Pin Installation Tool, Stainless Steel ................................. 6.95Front Pivot Pin, w/detent, f/Colt, Specify Large or Small .................... 6.95Front Offset Pin, f/Colt large-hole lower & small-hole upper ............. 5.95Front Offset Bushing, f/Colt large-hole upper & small-hole lower ...... 4.95Hammer, Mil. Spec, not Chinese ................................................... 19.95Hammer, Large Hole, f/Colt, Mil. Spec., not Chinese ...................... 29.95Hammer Pin, Small/Large for Colt ............................................ .95/4.95Hammer Pin, Small, slightly oversize for worn receivers ................... 4.95Hammer Spring ............................................................................. 1.50Magazine Catch, Ambidextrous, Norgon, Simply Awesome! ........... 89.95Magazine Catch Assy. ..................................................................... 7.95
—Magazine Catch ...................................................................... 4.95—Magazine Catch Button, Alum, not Plastic ................................. 2.95—Magazine Catch Spring .............................................................. .95
Magazine Catch Button, Oversized ................................................ 14.95Pin Kit/Spring Kit ................................................................. 14.95/9.95Pistol Grip, A1, Used, Excellent ....................................................... 5.95Pistol Grip, A2, Black/OD Green/Tan ............................................. 6.95Pistol Grip, A2, with Hinged Door & Stowaway Compartment ......... 11.95Pistol Grip, Accutron, w/Thumbrest, SPR ........................................ 19.95Pistol Grip, Phantom/Liberator Tactical, RH, Black, OD or Tan ......... 19.95
—Ambi, Black .......................................................................... 19.95Pistol Grip, Predator, by Royal Arms ............................................... 59.95Pistol Grip System, Magpul MIAD, with Storage Compartment and
Interchangeable Front & Back Straps; Make the Grip Fit Your Hand! .. 34.95—Core Insert for 2 AA/AAA Batteries or 2 CR123 Batteries (Specify) . 19.95
Pistol Grip Filler, “The Gapper” ....................................................... 4.95Pistol Grip Plug, Makes Grip a Storage Compartment
—for A2 Grips ........................................................................... 5.95—for Phantom/Liberator & Ergo Grips, Black, OD or Tan .............. 5.95
13
Bolt Gas Ring, One-Piece McFarland ............................................... 3.95Carry Handle, Detachable, for Flattop ............................................ 99.95Charging Handle Assembly .......................................................... 19.95Charging Handle Tactical Latch/Pin ...................................... 19.95/1.00Charging Handle Tactical Latch, for Either Hand/Pin .............. 14.95/1.00D-Fender Extractor Enhancer ......................................................... 12.95Ejection Port Cover ......................................................................... 5.95Ejection Port Cover Assy (Cover, Pin, Snap Ring & Spring) .................. 7.95Ejection Port Cover Pin/Pin Snap Ring/Spring ...................... 1.25/.50/.95Ejector w/Spring/Ejector Pin ...................................................... 2.95/.50Extractor, GI/Extractor Pin/Spring Assy ........................... 14.95/.95/1.95Extractor Spring, Fulton Armory Heavy Duty, w/Buffer Assy ............... 5.95Extractor Enhancer, D-Fender ........................................................ 12.95Firing Pin, Chromed ....................................................................... 6.95Firing Pin Retainer ............................................................................ .95Flash Suppressor, 3 Prong/A1 or A2 ....................................... 7.95/6.95Flash Suppressor, National Match ................................................. 14.95Flash Suppressor, Phantom, Closed Bottom
for Compensator Effect, Includes Crush Washer .......................... 29.95Flash Suppressor, Phantom, Closed End ............................................ 29.95Flash Suppressor, Vortex® ............................................................ 59.95Flash Suppressor, Compensator (Muzzle Brake), Smith Enterprises .. 59.95Flash Suppressor Lock Washer, f/A1 & 3-Prong Suppressors ............... .50Flash Suppressor Peel Washer, f/A2 Suppressor ............................... 1.95Flash Suppressor Crush Washer, Replaces Peel Washer! ................... 2.95Forward Assist, Round .................................................................... 9.95Forward Assist Assembly, Round, Includes Pin and Spring ............... 10.95Front Sight Base, GI Forged, specify with or without bayo lug ................. 34.95Front Sight Base, GI Forged, w/setscrews, Windage-Adjustable,
specify with or without bayonet lug ............................................. 59.95Front Sight Base, for Match Rifle, Adjustable, Steel, Lipski
—Specify 812” or .920” / with Bubble, .920” Only .... 119.95/144.95Front Sight Base Taper Pin, GI ......................................................... 1.95Front Sight Post, A1 (Round)/A2 (Square) ................................ 4.95/4.95Front Sight Post NM/2A .052 Blade ............................................... 12.95Front Sight Post, A2, plastic, set of five colors SPECIAL ...................... 1.95Front Sight Post Detent/Detent Spring .......................................... .95/.50Front Sight, Folding, for FourRail Steel Gas Block ........................... 74.95Front Sight, Folding, for Rail Handguards, Fulto n Armory ............... 74.95Front Sight, Folding, for Rail Handguards, Troy, Black or FDE ......... 119.95Front Sight, Folding, with Integral Gas Block, with Bayonet Lug ............. 79.95Front Sling Swivel with Rivet ............................................................ 2.95Front Sight Tower Ambi QD Swivel Base ........................................ 29.95
—QD Swivel, push button, 1¾” for above .................................. 12.95Front Vertical Grip, Twist-Lock QD ................................................ 24.95Gas Block, with Top Rail, .750” SPECIAL ....................................... 19.95Gas Block, Steel, FourRail, Four Rails and
Ambi QD Swivel Mounts, Fulton Armory Exclusive! SPECIAL ....... 49.95—Folding Steel Front Sight f/ FourRail Gas Block ....................... 74.95
Gas Block, f/Varmint or Match Rifle, .750 ...................................... 29.95Gas Block, f/Varmint or Match Rifle, Compression Fit, .936 ............ 49.95Gas Tube, Specify for Rifle or CAR ................................................. 11.95Gas Tube Pin ................................................................................... .50Handguards, Triangular M16, Used, Excellent, 20” ........................ 24.95Handguards, Round, Black, 20” A2/16” CAR ...................... 22.95/19.95Handguards, Round, 20” A2/16” CAR, OD Green or Tan ... 22.95/19.95Handguards, GI M4 w/double heat shields .................................... 49.95Handguards, Polymer, Swan/Weaver rails top & bottom,
includes covers, for Carbine ...................................................... 84.95Handguards, Polymer, Swan/Weaver rails All Four Sides
includes covers, for Rifle .......................................................... 119.95Handguards, Aluminum, Swan/Weaver rails
All Four Sides, Fulton Armory Exclusive Ambi QDSling Swivel Sockets, Rifle/Carbine ............................. 179.95/129.95
Handguard Accessory Rail, 6”, for A2 and CAR Handguards ........... 24.95Handguard Cap, Specify Round or Triangular ................................... 4.95Handguard Delta Ring (Aluminum) .................................................. 6.95Handguard Snap Ring/Weld Spring ............................................ .95/4.95
Handguard Float Tubes, with steel locking rings!:—16 in., Round ....................................................................... 69.95—Accutron, Match Rifle, slotted for handstop 20+” ........................ 79.95—UBR, Light weight Four Rail, black
Laser Mount, Std, Bolt-On, For Rail ................................................ 14.95Light Mount, Std, Bolt-On, For Rail ................................................. 14.95Light Mount, Guardian QD, Specify 1” or 25mm, For Rail ............... 29.95Muzzle Brake, Smith Enterprise ..................................................... 59.95Rear Sight Assy, Flip-up, for Flattop, Yankee Hill, Steel .................... 89.95Rear Sight Assy, Flip-up, for Flattop, Troy Industries,, Black or FDE . 139.95Rear Sight Assy, Flip-up, for Flattop, ARMS #40 .............................. 99.95Rear Sight Assy, A2 Detachable ..................................................... 79.95Rear Sight Assembly A1, Complete/A2 Complete ............... 18.95/39.95Rear Sight Assembly NM/2A ½ Minute Windage &
½ or ¼ Minute Elevation, .040 & .046 Apertures ....................... 89.95Rear Sight Assembly, NM/2A Northern Competition, ¼ Minute
Windage and Elevation, .038 Aperture, Will Accept Lenses ....... 129.95Rear Sight Hooded Aperture NM, Steel, ½ Minute w/.040 Peep ...... 11.95Rear Sight Base for Micrometer Match Rear Sight, Adjustable,
Steel, Lipski, specify for RPA or Universal .................................... 79.95Sight Protector Set, A2, Hard Plastic, Fulton Armory ........................ 16.95Sights, Tritium Night, Steel Front and Rear ..................................... 79.95Sling Swivel, Heavy Duty QD Push Button, 1¾” .............................. 14.95Sling Swivel, Front, For Rail ........................................................... 19.95
Accessories & ToolsAccuWedge .................................................................................... 5.95Action Block for Upper Receiver, w/insert ....................................... 29.95Action Block for Lower Receiver ..................................................... 14.95Action Block Combo Kit, for Upper and Lower Receiver ................... 39.95Adjustable Cheek Piece, for AR-15, CVTL ...................................... 74.95Adjustable Comb Piece, for Scoped Rifles, Black or Brown .............. 59.95Armorer’s Multi-Wrench, Steel ...................................................... 29.95Bandolier, New GI, Incl. 12 stripper clips, cardboards
and 1 stripper clip guide ............................................................. 7.95Barrel Erosion Gauge, GI Spec SPECIAL ........................................ 29.95Barrel Extension Wrench ............................................................... 54.95Barrel Vise Jaws ........................................................................... 19.95Bayonet, M7, USGI, w/M8A1 Scabbard, Used, Excellent ................. 29.95Bayonet Lug Rail ........................................................................... 39.95Bipod, Harris, 1A2-L ..................................................................... 79.95Bipod Adaptor, for A2 Handguard, Harris #5 .................................. 15.95Bipod Adaptor, for Rail, Synthetic/Aluminum. ...................... 29.95/39.95Bipod Mount, QD, for Rail, ARMS #32, for Harris Bipod ................ 109.95Bolt Assembly/Disassembly Tool, The Best One! ............................ 39.95Bolt Carrier Carbon Scraper .......................................................... 29.95Bolt Carrier Gas Key Mops, Pack of 20 ............................................ 5.95Bore Brush ..................................................................................... 1.95Brass Catcher, Fits A1, A2 & Flattop! ............................................. 39.95Butt Stock Lead Weight .................................................................. 27.95Butt Stock Side Sling Ring Mnt, fits bet Lower Recvr & Front of Buttstock;
—A1 or A2/CAR Collapsible Buttstock ............................ 32.95/14.95Butt Stock Side Sling Ambi QD Mount for CAR,
mounts to Rear of Buttstock, Knight Industries ............................. 39.95Butt Stock Extender w/ambi QD swivel, adds 2” SPECIAL ............... 34.95Carry Handle, Detachable, for Flattop ............................................ 99.95CAR Stock Wrench .......................................................................... 4.95Case Deflector, specify for flattop or A2 upper receiver ................... 19.95Chamber Brush .............................................................................. 2.95Chamber Cleaning Tool, with brush, Dewey .................................. 14.95Chamber Cleaning Tool Kit, with brush & mops, Dewey .................. 34.95Cleaning Hold-Open Device. Aluminum not Plastic! ...................... 17.95Cleaning Kit, Complete for Buttstock ............................................. 14.95Cleaning Patches, .22 Cal., ProSmith, Cotton—800 pcs. .................. 7.95Cleaning Rod, Tetra ProSmith 1 Piece TufCoatTM Coated,
specify 29-, 36- or 44-inch ................................. 23.95/24.95/26.95Cleaning Rod Breech Guide, Dewey .............................................. 24.95Cleaning Rod Muzzle Guide ............................................................ 9.95
MORE AR-15 PARTS, ACCESSORIES & TOOLS
14
Cleaning Rod Thread Adaptor,Adapts Military Brushes to Commercial Cleaning Rods ................. 4.95
Detachable Carry Handle, for Flattop ............................................. 99.95Dry Fire Device, AR-15 ................................................................. 16.95Front Sight Adj Tool, A2/Combo A1-A2 .................................. 5.95/6.95Front Sight Tower Ambi QD Swivel Base ........................................ 29.95
—QD Swivel, push button, 1¾” for above .................................. 12.95Gas Tube Mops, 17”, Pack of 20 ..................................................... 5.95Handguard Installation Tool .......................................................... 19.95Handguard Lead Weight ............................................................... 34.95Headspace Gauge for Cartridge, critical for reloaders! ................... 59.95Headspace Gauge Set for Chamber
Go, No Go & Field/RARE! GI Field Reject ....................... 59.95/49.95Laser Barrel Mount, Clamps to Barrel ............................................ 19.95Laser Mount, Std, Bolt-On, For Rail ................................................ 14.95Light, TACM III, Includes Momentary Pressure Switch
and A2 Handguard Mount ....................................................... 149.95Light, TACM III, No Mount, specify Pressure or Pushbutton Switch .......... 89.95Light, TACM III, Replacement Lamp Assembly ................................ 24.95Light Mount, for Standard AR Round Handguards ............................ 54.95Light Mount, Std, Bolt-On, For Rail ................................................. 14.95Light Mount, Guardian QD, Specify 1” or 25mm, For Rail ............... 29.95MagCinch, Holds 2/30 Round GI Mags ......................................... 19.95Magazine, 30 Round, GI, New/Used, Excellent ................... 19.95/17.95Magazine, 30 Round, Orlite, New/Used, Good ..................... 19.95/4.95Magazine, 20 Round, GI, New ...................................................... 19.95Magazine, 20 Round, GI, Used, Excellent, Pre-Ban! ........................ 34.95Magazine, 5 or 10 Round Commercial Plastic ............................... 12.95Magazine Rebuild Kit, Specify for 20 or 30 Round ............................ 5.95Magazine Follower, Green for 30-Round Mag .................................. 1.95Magazine Follower, for Single Loading, Snap-in Plastic ..................... 9.95Magazine Follower, for Single Loading, Aluminum ......................... 16.95Magazine, Single Loading, Delrin, “Space Gun” or “Service” length ....... 39.95Muzzle Dust Cap, 2 pcs. ................................................................. 1.00Pistol Grip Plug, for A2 only, Make a Storage Compartment ............. 5.95Pistol Grip Plug, for Ergo Grip, Black, Olive Drab or Tan,
Make a Storage Compartment .................................................... 5.95Pivot Pin Installation Tool, Stainless Steel ......................................... 6.95
MORE AR-15 PARTS, ACCESSORIES & TOOLSRail for Bayonet Lug ...................................................................... 39.95Rear Sight Installation Tool ............................................................ 29.95Rear Sight Assy, Flip-up, for Flattop, Fulton Armory Steel ................. 79.95Rear Sight Assy, Flip-up, for Flattop, Troy Industries,, Black or FDE . 149.95Rear Sight Assy, Flip-up, for Flattop, ARMS #40 .............................. 99.95Rear Sight Assy, A2 Detachable ..................................................... 79.95Ruptured Case Extractor ............................................................... 16.95Safety Flag ..................................................................................... 1.95Scope Mnt, A2 Carry Handle, ARMS #2, The Best!/Import ........ 59.95/19.95Scope Mount, A2 Carry Handle, ARMS #39, Scout Mount ............. 139.95Scope Mount, QD, for ACOG, ARMS #19A ACOG ...................... 159.95Scope Mount, QD, for Swan/Weaver Bases, ARMS #19A .............. 159.95Scope Mount, QD, for Aimpoint, ARMS 22M68 ............................ 109.95
—Modular Spacer, for flattop/Extended Modular Spacer ........ 12.95/29.95Scope Mount, A2 Handle, for Aimpoint, ARMS #16A ...................... 69.95Scope Mount, A2 Handle, for Trijicon, ARMS #16T ......................... 69.95Scope Mount, QD, AN/PVS-4, ARMS #20 for flattop or rail ........... 174.95Scope Mount, ARMS #5 Multibase ................................................. 69.95Scope Mount Riser, for Flattop, w/iron sight seethrough .................. 24.95Scope Rings, ARMS #22, QD, L, M, H, 30mm ............................. 119.95Scope Ring Reducers, ARMS #37, 30mm to 1” .............................. 39.95Shipping Box, for Rifle, Heavy-Duty, Doesn’t Scream, “Rifle Inside, Steal Me!”
Reusable Many Times .................................................. Postpaid 35.00Sight Adjustment Tool, A1 ............................................................... 6.95Sight Protectors, Fulton Armory Front & Rear, Hard Plastic ............... 16.95Sling, Nylon, Silent, New, 72” ....................................................... 14.95Sling, Web, Black .......................................................................... 14.95Sling, Web, Extra Long, Olive Drab ................................................ 19.95Sling, Black or Tan Leather, NM, 48" Front, USGI Type .................... 29.95Sling, Leather, NM, 54" Front, Turner Saddlery, Black or Tan ............ 59.95Sling, All Weather Synthetic, NM, 54” Front, NRA Approved,
Turner Saddlery, Shrugs off water, Choose Black or Brown ................. 59.95Stripper Clips, 20 pcs/Stripper Clip Guide .............................. 5.00/1.95Swan Sleeve, ARMS #36-8 8” Flattop Extension ............................ 89.95
with flip-up rear sight .............................................................. 189.95Vertical Front Grip, Twist Lock QD ................................................. 24.95
The AR-15 Complete Owner’s Guide, by Kuleck & Duff provides theprospective, new or experienced AR-15® owner with the in-depthknowledge he or she needs to configure, select, operate, maintain andtroubleshoot his or her rifle. Colt Model Number and pre-/post-ban serialnumber information is included. ................................................... 22.95
The AR-15 Complete Assembly Guide, by Kuleck & McKee. The key toservicing your AR! Goes far beyond the military manuals in depth & scope,using words & 600 pictures to clearly guide you through every operationrequired to service your AR. You’ll learn the best and easiest ways toupgrade, enhance, disassemble and assemble your AR.This book will make you a more knowledgeable owner! ............... 19.95
AR-15 BOOKS & DVDThe Competitive AR-15, by Zediker ......................................29.95Handloading for Competition, by Zediker ..............................31.95Reading The Wind & Coaching Techniques by Jim Owens ...... 11.95Sight Alignment, Trigger Control & the Big Lie by Owens ...... 11.95Leather Sling and Shooting Positions by Jim Owens ................. 11.95Care, Cleaning & Sportmanship by Jim Owens ........................ 11.95US Infantry Weapons in Vietnam .....................................24.9522 min/color—”Weapons of the Infantry,” filmed in the 1960s was produced by the US
Army and Marine Corps as a training film for their soldiers. This instructional videocovers the rifles: M14, the M14A1 and the M16A1.
15
Rear Sight, Folding, ARMS 40L, Low Profile, Black, for SOPMOD .. 109.95Rear Sight, Folding, Troy Ind., Black or FDE, for SOPMOD ............ 139.95Receiver, Stripped, Fulton Armory Semiauto M14, FFL REQ’D
—Standard, Stripped, FFL REQ’D .............. Call for Availability 475.00(Compared to others, you can add our Bolt, Complete and
have money left over!)Receiver, Stripped, Fulton Armory Semiauto M14, with Stripped Bolt Fitted
and Headspaced to Fulton Armory 18.5” or 22” Chrome-Lined BarrelInstalled, FFL REQ’D ............................................................. 1099.95
Shipping Box, for Rifle, Heavy-Duty, Doesn’t Scream, “Rifle Inside, Steal Me!”Reusable Many Times ............................................... Postpaid 35.00
Safety/Safety Spring ......................................................... 24.95/2.95Selector Switch, Replica, Steel, Rotates, Looks Real!
Fill that stock cutout .............................................................. 49.95Spindle Valve/Valve Pin/Valve Spring ............................... 8.95/1.00/2.95Spring Kit, New, incl. op rod spring, spindle valve spring, extractor spring &
plunger, ejector spring & plunger, safety spring, hammer spring, magcatch spring ......................................................................... 34.95
Stock Ferrule/Stock Ferrule NM .................................... 14.95/24.95Stock Liner and Screws/Screws only ea. ........................... 19.95/5.95Stock, GI, Fiberglass, Like New, w/All Metal ........................... 149.95Stock, GI, Birch, Excellent, w/All Metal .................................... 149.95Stock, GI, Walnut, Excellent, w/All Metal ................................. 199.95Stock, New Walnut, Original Light Weight USGI Pattern,
Our Exclusive! Specify w/ or w/o Selector Cut, No Metal .......... 149.95Stock, New Walnut, No Selector Cut, No Metal
—Standard Weight/NM Heavy Weight ....................... 119.95/129.95Stock, New Brown Laminated Birch, No Selector Cut, No Metal
—Sandard Weight/NM Heavy Weight ........................ 139.95/149.95Stock, McMillan Synthetic, “M1A” NM, Black, Woodland or Desert
No Selector Cutout, No Metal .............................................. 469.95Stock, McMillan Synthetic, “M2A” NM, Black, Woodland or Desert, Adj.
Cheek Piece, Adj. LOP Buttplate, No Selector Cutout, No Metal 689.95Stock, McMillan Synthetic,“M3A” NM, Black, Woodland, or Desert, Adj.
Cheek Piece, Adj. LOP Buttplate, No Selector Cutout, No Metal 689.95Stock, Sage Tactical, Complete (no clip guide mount) ............... 719.95
specify f/(2) AA or AAA, or (2) CR123 Batteries ..................... 19.95Troy Flip-Up Front Sight, Black or FDE ................................... 119.95Troy Flip-Up Rear Sight, Black or FDE .................................... 139.95
PartsBarrel, FA, GI Contour, NM Quality, 22” or 18.5” “Bush Barrel” ....... 274.95
—for Chrome Bore on above barrels, add ................................ 55.00Barrel, Fulton Armory, Medium Weight SS NM............................ 249.95Barrel, Krieger Medium Weight DMR, SS ................................... 449.95Barrel, Krieger Heavy Weight, NM, Specify CM or SS ................... 449.95
—Target Gray Finish on SS Barrels ......................................... 35.00Bolt, Stripped with Roller/Bolt Complete ........................ 225.00/305.00Bolt Roller with Clip .................................................................. 19.95Bolt Stop/Bolt Stop Pin/Pin Spring ............................... 24.95/1.00/1.95Bolt Stop, Extended ................................................................... 59.95Butt Plate Assembly .................................................................. 49.95Butt Plate, Rubber Recoil Pad ..................................................... 19.95Butt Swivel ................................................................................ 5.95Butt Plate Screw, Lower .............................................................. 2.95Butt Plate Screw, Upper, for Wood Stock ...................................... 2.95Cartridge Clip Guide/Cartridge Clip Guide Pin .................... 19.95/1.00Clip Guide Scope Mount Base, Sage ........................................... 69.95Compensator, California-Mandatory, w/o bayo lug .......................... 149.95Compensator, California-Mandatory, Vortex DC ................................ 99.95Connector Lock/Lock Pin ..................................................... 4.95/1.00Ejector w/Spring ........................................................................ 8.95Extractor/Extractor Spring with Plunger ................................ 34.95/5.95Firing Pin, Forged & Milled ........................................................ 29.95Flash Suppressor, NM, FA, w/ or w/o bayo lug ............................. 69.95Flash Suppressor, Vortex® DC/Classic ............................ 99.95/149.95Flash Suppressor Lock Nut/Lock Nut Set Screw ...................... 6.95/2.95Flash Suppressor Lock (Castle) Nut Pliers ........................................ 24.95Front Band .............................................................................. 14.95Front Sight/Front Sight Screw............................................. 19.95/1.00Front Sight, NM, .062, Milled, Not Cast Repro ............................. 29.95Front Sight, Night Sight, Specify for 18” or 22” Barrel .................... 62.95Front Sight, Folding, Yankee Hill, Black, For SOPMOD .................. 79.95Front Sight, Folding, Troy Ind., Black or FDE, for SOPMOD ........... 119.95Front Stock Swivel with Rail ....................................................... 59.95Front Stock Swivel with steel cap screws ...................................... 14.95Front Stock Swivel, NM, with steel cap screws .............................. 22.95Gas Cylinder, .......................................................................... 99.95Gas Cylinder, NM, with Welded & Modified Front Band ................ 199.95Gas Cylinder Lock/Gas Cylinder Plug ............................... 19.95/14.95Gas Cylinder Lock w/Front Sight & HK-Style Round Sight Protector ....... 49.95Gas Cylinder Lock w/Dovetail for Front Sight ............................... 99.95Gas Cylinder Shim Set, Stainless, One ea..005”, .010” & .015” .......... 9.95Gas Piston, New/NM, Polished ........................................ 29.95/39.95Hammer ................................................................................ 39.95Hammer Pin .............................................................................. 2.95Hammer Spring/Hammer Spring Housing ............................ 2.95/8.95Hammer Spring Plunger ............................................................... 5.95Handguard, Super Scout Rail for Military Contour Barrels ............. 249.95
—For SOCOM and Other Non-Mil-Contour Std Wt Bbls .......... 249.95—Accessory Rail for Super Scout Handguard, each .................... 19.95
Handguard, New, Solid Fiberglass, Fulton Armory, w/or w/o clip—Black or Brown without clip/with clip .......................... 14.95/19.95
Handguard Retaining Clip ........................................................... 5.95Magazine Catch ........................................................................ 16.95Magazine Catch Pin/Catch Spring ........................................ 1.00/2.95Magazine, 20 Round, Rebuild Kit ................................................ 14.95Operating Rod, New, Milled, Fulton Armory, Perfection! .............. 224.95Operating Rod Guide, Milled/Op Rod Guide Pin .................. 14.95/1.00Operating Rod Spring/Pack of 10 ....................................... 6.95/50.00Operating Rod Spring Guide/NM, Fulton Armory ............... 19.95/29.95Rear Sight Aperture .................................................................. 19.95Rear Sight Aperture, NM, .0520 or .0595 ................................... 39.95Rear Sight Base ........................................................................ 29.95Rear Sight Elevation Serration Repair Disk ................................... 16.95Rear Sight Elevation Knob.......................................................... 49.95Rear Sight Spring Cover .............................................................. 6.95Rear Sight Windage Knob .......................................................... 29.95Rear Sight, Complete ............................................................. 134.95Rear Sight, Folding, Yankee Hill, Black, for SOPMOD.................... 89.95
Go, No Go & Field, .308 ......................................................... 59.95Laser Mount, Std, Bolt-On, For Rail
MORE M14 FULTON ARMORY CERTIFIED PARTS, ACCESSORIES & TOOLS
M14 BOOKS, PRINTS and DVDs
The M14 Owner’s Guide by Scott Duff & John Miller ................ 19.95M14/M1 Garand Shop Manual by Jerry Kuhnhausen .............. 44.95Reading The Wind & Coaching Techniques by Jim Owens .... 11.95Sight Alignment, Trigger Control & the Big Lie by Owens .... 11.95Leather Sling and Shooting Positions by Jim Owens ............... 11.95Care, Cleaning & Sportmanship by Jim Owens ...................... 11.95Handloading for Competition, by Zediker ............................ 31.95US Infantry Weapons in Vietnam DVD
22 min/color—”Weapons of the Infantry,” filmedin the 1960s was produced by the US Army andMarine Corps as a training film for their soldiers.This instructional video covers the rifles: M14,the M14A1 and the M16A1. Also included arethe M79 grenade launcher, 90 and 106mmrecoiless rifles, 50 caliber spotting guns, and81mm and 4.2 inch mortars. This video is filledwith fascinating instructional scenes of how allthese famous guns and mortars work.
US Infantry Weapons in Vietnam .................................. 24.95See Page 20 for more videos
Any two videos, save ten bucks! ................................... 39.95Set of all five classic videos, save forty-five bucks! ....... 79.95
Light, TACM III, No Mount, specify Pressure or Pushbutton Switch .......... 89.95Light, TACM III, Replacement Lamp Assembly ................................ 24.95Light Mount, Std, Bolt-On, For Rail ................................................. 14.95Light Mount, QD, Specify 1” or 25mm, For Rail .............................. 29.95Magazine, New Commercial
—5 Round Flush/10 Round ..................................................... 34.95Magazine, 20 Round, New, Mil-Spec ........................................... 39.95Magazine, 20 Round, USGI, New, Pre-Ban, ‘70’s Manufacture .... 74.95Magazine 20 Round Rebuild Kit, w/USGI Mag Follower .................. 14.95Muzzle Wear Gauge for .300 - .303 bores .................................. 34.95Night Front Sight, Specify for 18” or 22” Barrel ............................ 62.95Print, M14 Exploded View, 16” x 20”, Worth Framing! .................. 19.95Rear Sight Protector ................................................................... 4.95Recoil Buffer by Buffer Technologies ............................................ 14.95Rifle Case, Canvas, WWII type, Unlined/Fleece Lined .......... 24.95/39.95Ruptured Case Extractor, .308 and 7.62...................................... 16.95Safety Flag, Required at Most Ranges & All Competition .................. 1.95Scope Mount Base, Sage Clip Guide ........................................... 69.95Scope Mount, w/ Weaver Rail, Alum, no Gunsmithing ................... 69.95Scope Mount, ARMS #18, Steel, USGI & SpecOps .......................... CALLScope Mount, US Tactical, Steel,
3 Point Attachment, the Professionals’ Choice .................... 199.95Scope Rings, ARMS #22 QD, 30mm, Low/Med/High ................. 119.95Scope Ring Reducers, ARMS #37, 30mm to 1 inch ....................... 39.95Selector Switch, Replica, Steel, Rotates, Looks Real!
Fill that stock cutout .............................................................. 49.95Shipping Box, for Rifle, Heavy-Duty, Doesn’t Scream, “Rifle Inside, Steal Me!”
Reusable Many Times ............................................... Postpaid 35.00Sling Swivel, Heavy Duty QD Push Button, 1¾” ............................ 14.95Sling Swivel, Front, For Rail ....................................................... 19.95Sling, Web, New, Black or OD ................................................... 14.95Sling, Leather, M1907, GI Type, Steel Hardware, Black or Tan ........ 34.95Sling, Leather, M1907, GI Type, Brass Hardware, Tan ................... 29.95Sling, Leather, NM, 54" Front, Turner Saddlery, Black or Tan ........... 59.95Sling, All Weather Synthetic, NM, 54” Front, NRA Approved,
Turner Saddlery, Shrugs off water, Choose Black or Brown ................ 59.95Stabilizer Assembly, M14E2, Milled ............................................ 59.95Stock Liner Screw Tool ............................................................. 14.95Stock Rail with Swivel ............................................................... 59.95Stripper Clips, 10 pack ............................................................... 7.95Stripper Clip Guide, for Magazine Loading via Clips ........................ 4.95Throat Erosion Gauge, GI Design & Spec, .308/7.62MM ................. 79.95Vertical Front Grip, Twist Lock QD, for SOPMOD ......................... 24.95Winter Trigger, New GI Paddle Type, Just Slides Over Trigger Guard 14.95
NEW! The M14 Complete Assembly Guideby Walt Kuleck & Clint McKeeThe key to servicing your M14! Goes far beyond themilitary manuals in depth & scope, using words andover 600 pictures to clearly guide you through everyoperation required to service your M14 rifle. You’lllearn the best and easiest ways to upgrade, enhance,disassemble and assemble your M14. Included aredetailed instructions for the NM trigger mod andfitting the NM rear aperture. The Norinco/Polytech“upgrade” is extensively covered. This book willmake you a more knowledgeable owner! ... 24.95
NEW! M14 Exploded View PrintDetailed print showing all thecomponents of the M14 Rifle. Full color,16” x 20” on coated stock, suitable forframing. Shipped rolled in heavy tube.19.95
17
PartsBarrel, Fulton Armory, Military Contour, 1x10
.270 Win, .308 Win or .30-’06 ............................................... 274.95Barrel, Fulton Armory, Military Contour, 1x10
Chrome Chamber & Bore, .308 Win or .30-’06 ....................... 324.95Barrel, Krieger Standard Weight NM, GI Contour, CM, 1x10
Solid Old Style/w Poppet Valve New Style ...................... 12.95/14.95Gas Cylinder Plug, with adjustable jets .......................................... 39.95Gas Cylinder, used, Good on Gauge, USGI ................................... 99.95Gas Cylinder, NEW .................................................................... 199.95Gas Cylinder Wrench for M1 ........................................................... 9.95Hammer/Hammer Pin ........................................................ 39.95/2.95Hammer Spring/Spring Housing/Spring Plunger ............ 2.95/8.95/5.95Handguard, Front, New Walnut, No Metal ...................................... 29.95Handguard, Front, Tanker, New Walnut, No Metal .......................... 39.95Handguard, Rear Super Scout Rail ............................................... 129.95
—Accessory Rail for Super Scout Handguard, each ..................... 19.95Handguard, Rear, New Walnut, No Metal ....................................... 29.95Handguard, Rear, M1D, New Walnut ............................................. 34.95Handguard, Rear, Retaining Clip ...................................................... 5.95Lower Band/Lower Band, Tanker ........................................ 19.95/44.95
Lower Band Pin .............................................................................. 1.00Muzzle Brake, Smith Enterprises, Really Cool! .............................. 149.95Operating Rod/Operating Rod, Tanker ........................... 229.95/299.95Operating Rod Spring, New/Pack of 10 ................................ 6.95/50.00Operating Rod Spring, Tanker ....................................................... 14.95Operating Rod Catch ....................................................................... CallRear Handguard Retaining Clip ....................................................... 5.95Rear Sight Aperture ...................................................................... 19.95Rear Sight Aperture, NM, .0520 or .0595 ..................................... 39.95Rear Sight Base ............................................................................ 29.95Rear Sight Elevation Serration Repair Disk ...................................... 16.95Rear Sight Elevation Knob ............................................................. 49.95Rear Sight Spring Cover .................................................................. 5.95Rear Sight Windage Knob ............................................................. 24.95Rear Sight, Complete .................................................................. 134.95Safety .......................................................................................... 24.95Screw, Gas Cylinder Lock Solid/w Poppet Valve .................. 12.95/14.95Spring Kit, Includes HD Clip Latch Spring ....................................... 29.95Stacking Swivel/Stacking Swivel Screw ................................. 14.95/2.95Stock Ferrule, Stripped, New/Screw, New/Swivel, New .14.95/4.95/4.95Stock Ferrule with Swivel, New ..................................................... 19.95Stock Set, Brown Plastic with Handguards, No Metal ....................... 69.95Stock, New Walnut, Updated “Korean” Contour, No Metal .............. 89.95Stock Set, New Walnut, Updated Korean, w/Handguards, No Metal . 129.95Trigger & Sear Assembly/Trigger Pin .................................... 19.95/2.95Trigger, Winter .............................................................................. 14.95Trigger Group, Complete, Milled/Stamped Guard ............. 159.95/154.95
—Add for NM Trigger Mod to above Trigger Group ..................... 65.00Trigger Guard, Milled/Stamped .......................................... 29.95/24.95Trigger Housing ............................................................................ 39.95Accessories & ToolsBayonet Grips, New Black Plastic, w/Screw, for M1905 & M1 Bayos ... 29.95Bayonet, M5A1 (6½”), new, with used scabbard, GI ....................... 49.95Bayonet, M1 (10”), for Garand and M1903 Springfield, no Scabbard
Chrome, Excellent Cond/Good Condition ..................... 149.95/99.95Blank Firing Adaptor, works w/ New Gov’t Crimped Blanks! ............ 9.95Blank Firing Adaptor, Danish, The Best BFA By Far,
works with old blanks and new crimped blanks .......................... 19.95Bolt Assembly-Disassembly Tool, GI Design .................................. 69.95Bore Brush, .30 Cal., for Garand, M1 Carbine & M14 ...................... 1.95Box, Shipping, Sturdy, the one we use! Postpaid ............................. 35.00Cartridge Belt, M1923, holds 10 loaded 8-round clips,
Incredible Reproduction, Identical to Original. Not Indian! ............... 29.95Case, Carrying, Canvas, WWII type ............................................... 24.95
M1 GARAND BOOKS, POSTERS & DVDsM1 Garand BooksThe M1 Garand Complete Assembly Guide by Walt Kuleck with Clint
McKee. The key to servicing your Garand! Goes far beyond the militarymanuals in depth & scope, using words & pictures to clearly guide youthrough the best ways to maintain, enhance, disassemble and assemble yourGarand, including John Garand Match prep. .................................. 22.95
The M1 Garand Owner’s Guide by Scott Duff. Everything youneed to shoot & maintain your Garand. Goes far beyond themilitary manuals with information you can use! ..................... 19.95
US Infantry Weapons in Combat: Personal Stories ............... 23.50The M1 Does My Talking (book): The M1 in pictures ............ 12.95The M1 Garand: WWII by Scott Duff. The Classic Reference to the
development and manufacture of the Garand to the end of WWII.A must for that restoration project or just to evaluate how originalyour WWII Garand is. ............................................................. 34.95
The M1 Garand: Post-WWII by Scott Duff. Takes up where “The M1Garand: WWII” leaves off. Covers postwar storage and manufactureby Springfield Armory, and manufacture by International Harvesterand Harrington & Richardson .................................................. 21.95
The M1 Garand Serial Numbers and Data Sheets by Duff. Anindespensible pocket reference for gun shop & gun show crawling! .. 9.95
M1 Exploded View Color, 16” x 20”, suitable for framing! ............ 14.95The M1 Does My Talking” (Print): The Classic WWII Poster .......... 4.95
Arms for the Nation: Springfield Armory History .............................. 9.95
M1 Rifle Marksmanship Part 1 DVD70 min/b&w—“Rifle Marksmanship with the M1 Rifle,Preparatory Training,” filmed in the 1940’s. This videois in black & white and was produced by the US ARMYas a instructional video on basic marksmanship withthe M1. The video is over an hour long and coversevery aspect of accurately shooting these famousWWII weapons. This video was digitally transferredfrom a 16mm film to video. The quality is outstanding!
M1 Rifle Marksmanship Part 2 DVD75 min/b&w—“Rifle Marksmanship with the M1 Rifle, Preparatory Training: Elevation andWindage,” filmed in the 1940s. This is a continuation of the original M1 BasicMarksmanship series. It focuses on “elevation and windage” and the correct calculationsfor setting the M1’s sights. This video is in black & white and was produced by the USARMY as a instructional video on advanced marksmanship with the M1. The video is anhour long and covers every aspect of sighting these famous WWII weapons.
US Army Small Arms Weapons in WWII DVD40 min/b&w—The Fundamentals of Small Arms Weapons; filmed in the 1950’s, itis an instructional video on the basic working operation of a M1 Garand rifle. Thevideo covers many other types of small arms including the BAR, M3, .45 pistol,and .50 caliber machine gun. This is a fascinating instructional video on how agun really works. Using a giant-sized replica, an Army instructor shows the innerworkings of these guns.Any one video ...............................................................24.95Any two videos, save ten bucks! ...................................39.95Set of all five classic videos, save forty-five bucks! .......79.95
18
Cleaning Patches, .30 Cal., All Cotton, ProSmith—300 pcs ............. 7.95Cleaning Kit with Pouch ............................................................ 19.95Cleaning Rod, 2 Piece with Belt Case, GI ..................................... 19.95Cleaning Rod, Tetra ProSmith 1 Piece Nylon Coated, 29” .............. 23.95Flash Hider, M3 ....................................................................... 59.95Front Sight Removal Tool/Installation Tool ......................... 34.95/39.95Handguard, Flattop, w Swan/Weaver (Picatinny) Rail ..................... 89.95Headspace Gauge Set for Chamber
Go, No Go & Field ............................................................... 74.95Magazine, 5 Round/10 Round/ ........................................ 10.95/10.95Magazine, 15 Round, new Fulton Armory, Made in USA
Each/10 Pack .......................................................... 19.95/150.00Magazine, 15 Round/30 Round, New GI, Some Rust .......... 24.95/24.95Magazine, 30 Round ................................................................ 29.95Magazine Jungle Clip, for 2-30-rnd mags ..................................... 7.95Magazine Dust Cap, package of 5 ................................................ 5.00Mag Belt Pouch, New GI, for 2 15 rnd mags ................................ 14.95Magazine Stock Pouch, WWII-type, holds two 15-rnd mags ............ 29.95Muzzle Brake, M1 .................................................................... 69.95Muzzle Wear Gauge ................................................................. 34.95Oiler ....................................................................................... 6.95Piston Nut Wrench ................................................................... 19.95Safety Flag—required for competition! .......................................... 1.95Rifle Case, Carrying, Canvas, WWII type ...................................... 24.95Rifle Case, Carrying, Canvas, WWII type, Fleece Lined .................. 39.95Scope Mount, locks into rear sight dovetail, solid! ......................... 24.95
—Scope Mount Rings, 1”, Aluminum, pair ............................... 14.95Shipping Box, Postpaid .............................................................. 35.00Sling, New GI ......................................................................... 19.95Sling, Cotton Web, New Production, O.D. or Tan ........................... 14.95Trigger Spring Tool ..................................................................... 9.95
Carbine Caliber ................................................................. 169.95Barrel, New, Winchester, stripped, cut between gas block and front sight,
Sold AS IS. At this price, no returns, please. ............................. 24.95Barrel Band with Bayonet Lug/Barrel Band Retaining Spring .... 22.95/4.95Bolt, M1, Flat, Stripped/Complete .................................... 69.95/99.95Bolt, M2, Round, Stripped/Complete, NEW! ....................... 69.95/99.95Butt Plate, New/Used GI/Butt Plate Screw ................... 19.95/9.95/2.95Ejector with Spring ..................................................................... 5.95Extractor/Extractor Spring with Plunger ................................ 19.95/4.95Firing Pin ................................................................................ 14.95Flash Hider, M3 ....................................................................... 59.95Front Sight, New/Front Sight Key/Front Sight Pin .......... 14.95/4.95/1.95Gas Piston/Gas Piston Nut .................................................. 8.95/9.95Hammer, M1/M2 .......................................................... 16.95/24.95Hammer Pin/Spring/Plunger ....................................... 2.95/2.95/4.95Handguard, GI, Good Condition/New Walnut with Metal ..... 14.95/29.95Handguard, Metal, Ventilated ..................................................... 14.95Handguard, Super Scout, w Swan/Weaver (Picatinny) Rail ............. 89.95Magazine Catch, M1/M2, for 30 Round Mags ................... 14.95/14.95Mag Catch Spring & Plunger ........................................................ 4.95Rear Sight, Adjustable ............................................................... 49.95Recoil Plate/Recoil Plate Screw/Recoil Plate Nut ............. 6.95/1.95/4.95Recoil Spring, New, GI/Recoil Spring Guide ........................... 4.95/5.95Safety, Flip/Safety Spring with Plungers ................................. 5.95/4.95Sear, M1/M2/Sear Spring ....................................... 14.95/14.95/2.95Slide, M1/M2 .............................................................. 99.95/149.95Slide Stop/Slide Stop Spring .................................................. 3.95/.95Stock, Used, with Metal, Birch Only, Special! ................................ 49.95Stock, New Birch, No Metal, may need some rework, Special! ........... 29.95Stock, New Walnut, No Metal .................................................... 99.95Stock, Choate Folding ............................................................... 99.95Trigger/Trigger Pin/Trigger Spring .............................. 14.95/1.95/2.95Trigger Housing Group, Complete ............................................ 149.95Trigger Housing/Trigger Housing Pin .................................. 49.95/2.95Trigger Housing Pin .................................................................... 2.95
Accessories & ToolsAction Wrench and Barrel Block Tool Set ...................................... 79.95Bayonet, M4, New w/Scabbard, GI, Plastic Grip ............................... 69.95Bayonet, M4, Orig GI w/Scab, Plastic Grip, Good/Exc ........... 39.95/59.95Bolt Assembly-Disassembly Tool ................................................ 39.95Bore Brush, .30 Cal., for M1 Carbine, M1 Garand & M14 ................ 1.95
M1 CARBINE PARTS, ACCESSORIES, TOOLS & BOOKS
M1 CARBINE BOOKS & DVDsThe M1 Carbine Owner’s Guide, by Ruth & Duff ....................... 21.95M1 Carbine Shop Manual by Jerry Kuhnhausen ....................... 29.95US M1 Carbine: Wartime Production by Reisch.
A Great Collector’s Guide .................................................... 16.95M1 and M2 Carbine DVD 26 min/b&w—“The M1 Carbine & the M2 Carbine”
was filmed in the 1950’s in black & white and was produced by the US ARMY as ainstructional video on the basic working operation of both the M1 and M2 carbine. It isfilled with fascinating instructional scenes of how these rifles work. Using a giant-sizedreplica, an Army instructor shows all the inner workings of the M1 and M2. .. 24.95
Arms for the Nation History of the Springfield Armory ................. 9.95
Headspace Gauge for Cartridge, specify .30-’06 or .308 .............. 59.95Headspace Gauge Set for Chamber
Go, No Go & Field, specify .30-’06 or .308 ............................... 59.95Leather Cheek Piece, USGI Type ................................................... 24.95Muzzle Brake, Smith Enterprises, Really Cool! .............................. 149.95Muzzle Wear Gauge for .300-.303 bores ...................................... 34.95Poster, M1 Exploded View, Color, 16” x 20”, Worth Framing! ......... 14.95Rear Sight Protector ........................................................................ 4.95Rifle Case, Carrying, Canvas, WWII type ........................................ 24.95Rifle Case, Carrying, Canvas, WWII type, Fleece Lined ................... 39.95Ruptured Case Extractor, .30-’06 or .308 ...................................... 16.95Safety Flag, Required for Competition .............................................. 1.95Scope Mount w/Weaver Base (no rings), The Best! .......................... 99.95Scope Mount w/1" Rings, The Best! .............................................. 109.95Scope Mount, Rail, Replacement for Rear Handguard .................... 129.95Shipping Box, for Rifle, Heavy-Duty, Doesn’t Scream, “Rifle Inside, Steal Me!”
Reusable Many Times .................................................. Postpaid 35.00Sling, Web, New Black or Olive Drab ............................................ 14.95Sling, Leather, M1907, GI Type, w/Brass Hardware, Tan ................. 29.95Sling, Leather, NM, 54" Front, Turner Saddlery, Black or Tan ............ 59.95Sling, Biothane, NM, , 54" Front, Turner, Black or Tan ...................... 59.95Spacer Block f/.308 cal. f/Mag Well, Steel ..................................... 24.95Throat Erosion Gauge, specify .30-’06 or .308, GI Spec ................. 79.95Timing Block, Steel, USGI Spec ..................................................... 99.95Winter Trigger .............................................................................. 14.95
FAR-15, AR-15-TYPE (and AR-15®) RIFLE SERVICESWe start with our acclaimed & exclusive Complete Tech Inspection when your rifle arrives—where we completely disassemble, inspect, and gauge each component, consult with you on any work to be done, then clean, assemble, lubricate andtest fire your rifle. The TI is the foundation for all the work we’ll do on your rifle. The TI ensures the function and safety of your rifle upon its return to you.Include a daytime phone number so we may discuss our findings with you .................................................................. 49.95 (plus return shipping)
Rifle Upgrades to the Complete Technical Inspection .............................................................................................................. 49.95 TI plus...
For Target Gray Matte Finish on SS barrel .................................................................................................................... Add 35.00Install Krieger SS 20" National Match Service Rifle barrel
For Target Gray Matte Finish on SS barrel .................................................................................................................... Add 35.00
Customer-Supplied BarrelsTo Be Determined on inspection .................................................................................................................................................... —TBD—
Barrel ModificationsShorten Barrel and/or Thread barrel muzzle ........................................................................................................................ Not AvailableBlacken SS barrel and/or Chrome-line unlined barrel .......................................................................................................... Not Available
National Match ModificationsPolish, tune and refine standard “military” trigger .............................................................................................................................. Add 50.00Supply, fit, install and tune non-adjustable two-stage NM trigger ...................................................................................................... Add 180.00Supply, fit, install and tune adjustable Geissele two-stage NM trigger—unsurpassed lock time! ....................................................... Add 350.00Supply, fit, and install NM hidden handguard float tube
—Legal for CMP/NRA Service Rifle Match competition—Includes handguard and front sight base modifications ......................................................................................................... Add 175.00
Return Shipping for Complete Technical Inspection and UpgradesIncludes packing and insurance ....................................................................................................................................................... plus 45.00
We start with our acclaimed & exclusive Complete Tech Inspection when your rifle arrives—where we completely disassemble, inspect, and gauge each component, consult with you on any work to be done, then clean, assemble, lubricate andtest fire your rifle. The TI is the foundation for all the work we’ll do on your rifle. The TI ensures the function and safety of your rifle upon its return to you.Include a daytime phone number so we may discuss our findings with you .................................................................... 49.95 (plus return shipping)
Rifle Upgrades to the Complete Technical Inspection .............................................................................................................. 49.95 TI plus...
BarrelsFulton Armory Barrels
Install Fulton Armory .308 Titan 16.5" or 18.5" Stainless Baarrel .......................................................................................... Add 350.00Install Fulton Armory .308 Titan 20" or 22" Stainless Barrel ..................................................................................................... Add 370.00Install Krieger 6.5 Creedmore Single Point Cut 26" Stainless Barrel ....................................................................................... Add 700.00
For Target Gray Matte Finish on SS barrel ........................................................................................................................... Add 35.00Install Fulton Armory .308 Titan, 18.5", Chrome-Moly Chrome Bore Barrel ............................................................................. Add 370.00
“National Match” Trigger UpgradesPolish, tune and refine standard “military” trigger ...................................................................................................................... Add 50.00Supply, fit, install and tune Rock River two-stage NM trigger ..................................................................................................... Add 150.00Supply, fit, install and tune Geissele two-stage NM trigger—unsurpassed lock time! ................................................................ Add 300.00
Return Shipping for Complete Technical Inspection and UpgradesIncludes packing and insurance ....................................................................................................................................................... plus 45.00
.308 TITAN, DPMS LR-SERIES AND REMINGTON .308 AR-TYPE SERVICES
20
M14 and M14-TYPE (INCLUDING M1A®) RIFLE SERVICESWe start with our acclaimed & exclusive Complete Tech Inspection when your rifle arrives—where we completely disassemble, inspect, and gauge each component, consult with you on any work to be done, then clean, assemble, lubricate andtest fire your rifle. The TI is the foundation for all the work we’ll do on your rifle. The TI ensures the function and safety of your rifle upon its return to you. Include a daytime phone number so we may discuss our findings with you ................................................................. 79.95 (plus return shipping)
Rifle Upgrades to the Complete Technical Inspection .............................................................................................................. 79.95 TI plus...
Install Fulton Armory Chrome-Moly Military Contour Barrel18.5” Bush or 22" Service Barrel (includes barrel) ............................................................................................................... Add 50.0018.5” Bush or 22" Service Barrel with Chrome-Lined Bore & Chamber (includes barrel) ................................................... Add 405.00
Install Fulton Armory 22” Stainless Steel National Match Medium Weight barrel (includes barrel) ............................................ Add 350.00Install Krieger 22” Stainless Steel DMR barrel .......................................................................................................................... Add 575.00
Install Krieger 22” Stainless Steel or Chrome-Moly National Match Heavy Weight barrel ......................................................... Add 550.00
For Target Gray Matte Finish on SS barrel ........................................................................................................................... Add 35.00
Barrel ModificationsRecrown Muzzle ................................................................................................................................................................................ 45.00Pull barrel, polish chamber and feed ramps, precisely re-index and reinstall ........................................................................ 100.00
Modify Chinese Receiver to Accept GI-spec BoltAdd to barrel installation to modify receiver and fit and lap customer bolt ................................................................................ Add 150.00
StocksFulton Armory Stocks
Supply, fit, sand, hand rub w/linseed oil and install new Fulton Armory M14 stock with customer-supplied hardware—Includes stock, no hardware, no bedding
Lightweight GI Contour or Standard Weight walnut stock ................................................................................................... Add 250.00M14 Medium Weight laminated stock ............................................................................................................................... Add 280.00
Add for standard hardware ......................................................................................................................................... Add 110.00350 for glass bed see below
Install Fulton Armory SOCOM DMR, CQB or SASS Stock, with stock purchase, ........................................................................... —FREE!—(Plus the cost of the stock: DMR, 780.00; CQB, 825.00; SASS, 985.00)—For Troy Folding Front and Rear Sights in Black or Flat Dark Earth ................................................................................. Add 260.00
—For Yankee Hill Folding Front and Rear Sights in Black .................................................................................................. Add 170.00—For Harris Bipod on ARMS QD Mount ............................................................................................................................ Add 190.00
Supply, fit, sand hand rub w/linseed oil and install new Fulton Armory NM Heavy Contour M14 stock—includes glass bedding, NM stock hardware, handguard mod, front end stock mod and stock ferrule mod
Supply, Fit and Install Front StockSwivel with Rail ........................................................................................................................................... 90.00Supply, Fit and Install Selector Switch to your USGI Wood Stock .................................................................................................................... 100.00
National Match Performance ModificationsSupply, fit and install NM rear sight aperture ...................................................................................................................................... Add 50.00Supply, Fit and install NM Front Sight ................................................................................................................................................. Add 30.00Supply, Fit and Install Fulton Armory NM Operating Rod Spring Guide .............................................................................................. Add 30.00Supply, Fit and Install Fulton Armory NM Polished Gas Piston ........................................................................................................... Add 40.00Supply, Fit and Install NM Gas Cylinder with Unitized and Modified Front Band ............................................................................... Add 200.00NM trigger modification to customer trigger group (any needed parts additional as required) ............................................................. Add 65.00
Scope Mount InstallationSupply, fit and install US Tactical extended scope mount, The Professionals’ Choice ......................................................................... Add 235.00
Return Shipping for Complete Technical Inspection and UpgradesIncludes packing and insurance ....................................................................................................................................................... plus 45.00
Perform National Match Modification on Your Trigger Group(trigger group only, plus return shipping)—Send in only your trigger group, include a daytime phone number; parts replacement as required ........................................................ 65.00
M1 Rifle Marksmanship Part 170 min/b&w—“Rifle Marksmanship with the M1 Rifle,Preparatory Training,” filmed in the 1940’s. This video is inblack & white and was produced by the US ARMY as ainstructional video on basic marksmanship with the M1. Thevideo is over an hour long and covers every aspect ofaccurately shooting these famous WWII weapons. This videowas digitally transferred from a 16mm film to video. Thequality is outstanding!
M1 Rifle Marksmanship Part 275 min/b&w—“Rifle Marksmanship with the M1 Rifle, PreparatoryTraining: Elevation and Windage,” filmed in the 1940s. This is acontinuation of the original M1 Basic Marksmanship series. Itfocuses on “elevation and windage” and the correct calculationsfor setting the M1’s sights. This video is in black & white and wasproduced by the US ARMY as a instructional video on advancedmarksmanship with the M1. The video is an hour long and coversevery aspect of sighting these famous WWII weapons.
Any one video ................................................................ 24.95Any two videos, save ten bucks! .................................... 39.95
21
M1 CARBINE RIFLE SERVICESWe start with our acclaimed & exclusive Complete Tech Inspection when your rifle arrives—where we completely disassemble, inspect, and gauge each component, consult with you on any work to be done, then clean, assemble, lubricateand test fire your rifle. The TI is the foundation for all the work we’ll do on your rifle. The TI ensures the function and safety of your rifle upon itsreturn to you. Include a daytime phone number so we may discuss our findings with you ................................................................. 74.95 (plus return shipping)
Rifle Upgrades to the Complete Technical Inspection .............................................................................................................. 74.95 TI plus...
Supply, fit, sand, hand rub and install new M1 Carbine walnut stock and handguard with customer-supplied hardware—Includes stock and handguard, no hardware ................................................................................................................................ 250.00
Return Shipping for Complete Technical Inspection and UpgradesIncludes packing and insurance ....................................................................................................................................................... plus 45.00
M1 GARAND RIFLE SERVICESWe start with our acclaimed & exclusive Complete Tech Inspection when your rifle arrives—where we completely disassemble, inspect, and gauge each component, consult with you on any work to be done, then clean, assemble, lubricate andtest fire your rifle. The TI is the foundation for all the work we’ll do on your rifle. The TI ensures the function and safety of your rifle upon its return to you. Include a daytime phone number so we may discuss our findings with you ................................................................. 79.95 (plus return shipping)
Rifle Upgrades to the Complete Technical Inspection .............................................................................................................. 79.95 TI plus...
Install Fulton Armory Chrome-Moly Military Contour BarrelSpecify .270, .308 or .30-’06 (includes barrel) ................................................................................................................. Add 350.00
Install Fulton Armory Chrome-Moly Military Contour Barrel with Chrome-Lined bore and chamberSpecify .308 or .30-’06 (includes barrel) ........................................................................................................................... Add 405.00
Install Krieger Chrome-Moly National Match Military Contour Barrel (includes barrel)Specify .30-’06 (only .30-’06 is Garand-Match-Legal) or .308 (includes barrel) ................................................................ Add 525.00
For Magazine Filler Block for .308 Barrel Installations ............................................................................................................... Add 25.00
Customer-Supplied BarrelsTo Be Determined on inspection .................................................................................................................................................... —TBD—
StocksFulton Armory Stocks
Supply, fit, sand, hand rub w/linseed oil and install new M1 Garand stock & handguards w/ customer-supplied hardware—Includes stock and handguards, no hardware, no bedding
Walnut stock and handguards ............................................................................................................................................ Add 229.00Add for new stock hardware, installed ................................................................................................................................. 85.00
Add for glass bedding, 350 with handguard modes and front end mod (requires stock, handguard and stock hardware) .......... 350.00
National Match ModificationsSupply, fit and install NM rear sight aperture ...................................................................................................................................... Add 50.00NM trigger modification to customer trigger group (any needed parts additional as required) ............................................................. Add 65.00
Return Shipping for Complete Technical Inspection and UpgradesIncludes packing and insurance ....................................................................................................................................................... plus 45.00
Perform National Match Modification on Your Trigger Group(trigger group only, plus return shipping)—Send in only your trigger group, include a daytime phone number; parts replacement as required ........................................................ 65.00
—recreates theWWII Garand Sniper!(Sling and Customer-Supplied Weaver K4Scope not included)
Fulton Armory Super Scout Rail Handguard
22
New Black Hills Ammunition Box Case.32 H&R Magnum85 Gr. Jacketed Hollow Point—Box/50 Case/500 .... 30.65 299.95
380 Auto90 Gr. Jacketed Hollow Point—Box/50 Case/1000 .. 27.50 534.9595 Gr. Full Metal Jacket—Box/50 Case 1000 ........... 25.25 439.95
.38 Special125 Gr. JHP +P—Box/50 Case/1000 ...................... 29.50 574.95
.357 Magnum125 Gr. Jacketed Hollow Point—Box/50 Case/1000 31.95 624.95158 Gr. Jacketed Hollow Point—Box/50 Case/1000 31.95 624.95
9mm Luger115 Gr. Full Metal Jacket—Box/50 Case/1000........ 22.95 449.95115 Gr. JHP Extra Power (EXP)—Box/50 Case/1000 27.50 536.95115 Gr. JHP+P—Box/50 Case/1000 ....................... 29.95 586.95124 Gr. Jacketed Hollow Point—Box/50 Case/1000 27.50 536.95124 Gr. JHP+P—Box/50 Case/1000 ....................... 29.95 586.95147 Gr. JHP—Box/50 Case/1000 ............................ 27.50 536.95
.40 Smith & Wesson155 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 32.95 324.95180 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 32.95 324.95
.44 Magnum240 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 41.95 412.95300 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 44.75 436.95
.45 ACP185 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 36.95 361.95200 Gr. Match Semi Wadcutter—Box/50 Case/500 . 32.95 324.95230 Gr. Full Metal Jacket—Box/50 Case/500 .......... 34.50 336.95230 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 38.25 374.95
.223 Remington40 Gr. Hornady V-Max®—Box/50 Case/1000 ......... 38.95 761.9550 Gr. Hornady V-Max—Box/50 Case/1000 ............ 38.95 761.9552 Gr. Match HP—Box/50 Case/1000 ..................... 34.50 674.9560 Gr. Hornady V-Max—Box/50 Case/1000 ............ 38.95 761.9568 Gr. “Heavy” Match HP—Box/50 Case/1000 ....... 35.75 699.9569 Gr. Sierra MatchKing—Box/50 Case/1000 ......... 41.95 824.9575 Gr. “Heavy” Match HP—Box/50 Case/1000 ....... 35.75 699.9577 Gr. Sierra MatchKing—Box/50 Case/1000 ......... 45.40 886.95
.308 Winchester168 Gr. Match HP—Box/20 Case/500 ..................... 23.95 586.95175 Gr. Match HP—Box/20 Case/500 ..................... 25.55 624.95
30-’06 Springfield (Black Hills Gold)168 Gr. Hornady Match BTHP—Box/20 Case/100 ... 27.95 136.95
300 Win. Mag.190 Gr. Match HP—Box/20 Case/500 ..................... 34.75 849.95
Remanufactured Black Hills Ammunition Box Case9mm Luger115 Gr. Full Metal Jacket—Box/50 Case/1000........ 16.60 324.95115 Gr. Jacketed Hollow Point—Box/50 Case/100017.905 349.95124 Gr. Full Metal Jacket—Box/50 Case/1000........ 17.90 349.95147 Gr. FMJ Subsonic—Box/50 Case/1000 ............. 17.90 349.95
.38 Special125 Gr. JHP—Box/50 Case/1000 ............................ 19.20 374.95148 Gr. Match Hollow Base WC—Box/50 Case/100017.90 349.95158 Gr. Semi Wadcutter—Box/50 Case/1000 ......... 17.90 349.95
.40 Smith & Wesson165 Gr. Full Metal Jacket—Box/50 Case/500 .......... 20.40 199.95180 Gr. Full Metal Jacket—Box/50 Case/500 .......... 20.40 199.95180 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 22.95 224.95
.45 ACP185 Gr. Jacketed Hollow Point—Box/50 Case/500 .. 25.55 249.95200 Gr. Match Semi Wadcutter—Box/50 Case/500 . 22.95 224.95230 Gr. Round Nose Lead—Box/50 Case/500 ......... 22.95 224.95230 Gr. Full Metal Jacket—Box/50 Case/500 .......... 24.25 235.95
BLACK HILLS AMMUNITION HORNADY AMMUNITIONNew Hornady Ammunition Box Case12 Gauge Shotgun00 Buckshot TAP FPD™, Box/5 Case/50 ..................... 7.50 65.00
.223 Remington40 gr V-MAX, Box/20 Case/200 ..................................... 17.55 160.0055 gr V-MAX, Box/20 Case/200 .................................... 17.55 160.0053 gr HP w/ Cannelure, Box/20 Case/200 .............. 17.25 155.0055 gr TAP FPD™, Box/20 Case/200 ......................... 19.75 177.0060 gr TAP FPD™, Box/20 Case/200 ......................... 19.75 177.0075 gr TAP FPD™, Box/20 Case/200 ......................... 19.75 177.0075 gr BTHP Match, Box/20 Case/200....................... 17.25 155.00
6.5 Creedmoor120 gr A-MAX MATCH, Box/20 Case/200 ................ 24.00 210.00140 gr A-MAX MATCH, Box/20 Case/200 ................ 24.10 211.00
.303 British150 gr SP Interlock, Box/20 Case/200 ..................... 25.25 225.00
.308 Winchester150 gr SST Interlock, Box/20 Case/200 ................... 24.00 20500110 gr TAP FPD™, Box/20 Case 200 ....................... 28.50 255.00155 gr TAP FPD™, Box/20 Case 200 ....................... 28.50 255.00165 gr SST Interlock, Box/20 Case 200 ................... 24.95 220.00168 gr TAP FPD™, Box/20 Case 200 ....................... 28.50 255.00168 gr A-MAX MATCH, Box/20 Case 200 ................ 26.00 235.00168 gr BTHP MATCH, Box/20 Case 200 .................. 23.75 209.00
.30-’06 Springfield150 gr SST Interlock, Box/20 Case/200 ................... 24.25 216.00165 gr SST Interlock, Box of 20 ................................. 24.50 215.00168 gr A-MAX MATCH, Box/20 Case/200 ................ 29.95 270.00
168 gr A-MAX MATCH, Developed Specifically for M1 Garands!
.338 Lapua250 gr BTHP MATCH, Box/20 Case/200 .................. 75.50 675.00
.40 S&W155 gr TAP FPD™, Box/20, Case/200 ...................... 16.00 145.00180 gr TAP FPD™, Box/20, Case/200 ...................... 16.00 145.00
.45 ACP +P200 gr TAP FPD™ +P, Box/20 Case/200 .................. 17.00 150.00230 gr TAP FPD™ +P, Box/20 Case/200 .................. 17.00 150.00
9mm Luger124 gr TAP FPD™, Box/25 Case/250 ....................... 19.65 175.25147 gr TAP FPD™ Box/25 Case/250 ....................... 19.65 175.25
Hornady TAP FPD™ — For Personal Defense
Personal defense demands superior ammunition.
Exceptionally accurate and consistent, TAP FPD™ rifle ammo offersenhanced terminal performance with rapid expansion andfragmentation resulting in dramatic wound cavities and a reducedrisk of over-penetration.The black nickel-coated cases helpeliminate corrosion and improve feeding in all firearms.
TAP FPD™ handgun ammunition is built around our proven XTP(Extreme Terminal Performance) bullet that offers precise accuracyand reliable expansion. Add to it the very best brass, powders andprimers precisely matched to each load and you have the finesthandgun ammunition ever made.
Loaded specifically to ensure proper functioning in semi-auto andpump shotguns, Hornady’s TAP FPD™ Buckshot delivers the tightestpatterns of any buckshot load on the market.
23
Credit Card Type: (circle one)
Number:
__ __ __ __/__ __ __ __/__ __ __ __/__ __ __
Expiration: ____/____
MAIL YOUR ORDER:FULTON ARMORY8725 Bollman Place, #1Savage, MD 20763
SHIPPING & HANDLING CHARGES:
Parts:Add $ 8.00 for orders up to ........... $30Add $10.00 for orders up to .......... $150Add $15.00 for orders up to .......... $250Add $ 20.00 for orders up to ......... $400Add $ 25.00 for orders up to ......... $500Add $ 35.00 for orders of $500 and overAdd $ 45.00/$ 35.00 for rifles/uppers
Ammo Case Lots Plus Actual Shipping ChargesAK, HI, PR and GU, US Mail only;
charges may vary.
VISA, MasterCard, Discover & AMEXaccepted, no additional fee.
Personal and businesschecks delay shipping.No C.O.D.s accepted
Maryland residents add 6% sales tax.F.F.L. required for rifles/receivers
SECURE WEB SITE:http://www.fulton-armory.com
CALL(301) 490-9485
FAX YOUR ORDER:(301) 490-9547
ORDER FORMORDERED BY: SHIP TO (street address only, no PO/APO/FPO
boxes, please!):Name: Name:
Address: Address:
City/State/Zip: City/State/Zip:
Phone ( ) Phone ( )
SUBTOTAL
MD RESIDENTS ADD 6% SALES TAX
SHIPPING
TOTAL
QTY. PRODUCT DESCRIPTION PRICE TOTAL
Notice:Fulton Armory strives diligently to keep prices as lowas possible consistent with quality. If the cost to us ofa component rises, we refuse to substitute a lowerquality product; we are then forced to raise our pricecorrespondingly. Fortunately, the necessity to raiseprices has occured only infrequently.Thanks for your understanding.
(LE & Dealers: call for quantity purchases.)
FULTON ARMORY
Four Great Ways to Order!1
Fulton Armory Ships only to USA AddressesNo PO/APO/FPO Boxes, please!
Orders may be picked up Fridays 1-4PM Only
2 3 4
Fulton Armory Warranty and Return PrivilegeAny damage or shortage must be reported to Fulton Armory within 7 days of receipt.
RETURNS: You may return any product for refund, less shipping, within 30 days of purchase. You must include a copy of the original invoice! Returned items must beunaltered, in their original condition and packaging and with the original documentation (if applicable) in which you received them. In other words, the product must beresaleable. After 30 days from purchase, no refunds or credits are possible.LIMITED WARRANTY: All Fulton Armory products carry a twelve month or 12,000 round (whichever comes first) materials and workmanship warranty to the originalowner with the original invoice only. During that period should a product fail under normal use (expected wear and tear excepted, of course) we will repair or replacethat product as appropriate.Transportation to and from our repair facilities, damage caused by failure to perform normal maintenance, damage due to use of high velocity, high pressure, reloadedor other non-standard ammunition, or any unauthorized repair, modification, misuse, abuse, or alteration of the product are not covered by our LIMITED WARRANTY.
It is the responsibility of the customer (or end user) to comply with All Federal, Local and State Regulations!Be certain to safeguard your original invoice!
24
8725 Bollman Place, #1Savage, MD 20763
We offer the finest AR-15, M1 Garand, M14/M1A and M1 Carbine stuff on earth!Brash, brazen, bold, you say?
We prove it with our 30-day money back guarantee, even on custom rifles!
1-301-490-9485
FULTON ARMORY
Order Line
Our technical knowledge is unsurpassed in the industry and freely given to our customers. Ourparts and services are always competitively priced and often the lowest by far, when all is said anddone. Compare what we have to offer with the rest, and then decide who's earned your business.
Order on-line: www.fulton-armory.comor phone: 301-490-9485
