Industrial Strength Fume Arms Industrial strength in capturing: • WELDING FUMES • GRINDING DUSTS • DRY DUSTS • SOLDERING DUSTS • POWDERS and many more... REMTECHNOLOGY REMTECHSTROY GROUP Modernization, complex repair and maintenance of heavy industrial equipment. Infrastructure construction and management Bulgaria, Varna 9000 Industrial Zone Str. Studentska 1 TU/UK1 phone: +359 (52)319980 +359 (52)319990 Fax: +359(52)319990 mobile:+359(888)204989 e-mail:[email protected]web:www.remtechnology.eu Overhaul, maintenance, supply and manufacture of components and parts for machinery Plasser&Theurer, Matica and etc. +359(888)265877
Transcript
Indu
stria
l Str
engt
h Fu
me
Arm
s
Industrial strength in capturing:• WeldIng FumeS• grIndIng duStS• dry duStS• SolderIng duStS• PoWderS and many more...
REMTECHNOLOGYREMTECHSTROY GROUP����� ����
Modernization, complex repair and maintenance of heavy industrial equipment. Infrastructure construction and management
Bulgaria, Varna 9000 Industrial Zone Str. Studentska 1 TU/UK104
method for capturing air impurities at their source. The construction of steel tubes, flexible hose at joints and external cast aluminium joints allow the arm to be positioned where needed. REM’s Fume arms come in diameters of 75, 100, 125, 160 and 200mm and lengths up to 4m.
All of REM’s Fume Arm can be easily equipped with a light kit or larger hood diameters. REM’s Fume Arms canbe easily used with REM’s Sliding
Suction Rails, Extension Booms, Fans and Modular Units. For more specific information on REM’s Fume Arms contact your local REM Representative
Welding • Grinding • Polishing • Cutting Soldering • Chemical Fumes and many more!
Applications:
Benefits:
All external Joints and Supports Air diverter and grab Handle all around the Hood
Standard damper
• industrial strength• versatile design• smooth tube contstruction• external joints and supports• hood and tube grab handles• air diverter in the hood• standard damper
Features:
• long lasting life time• user-friendly operation• higher airflow preformance• easy to adjust and maintain• simple positioning• increased capture velocity• damper with-in the price
REM’s Fume Arms are the most versatile, durable and economical
2008 All Rights Reserved w
ww.rem
technoIIogy.eu
ogy.eu/cataog/ em
ail: web@rem
technoI
Iog/or visit our web site at www.remtechnoIogy/cata
Indu
stria
l Str
engt
h Fu
me
Arm
s
hanging version
4
5
6
7
Industrial Strength Construction
SOCKET JOINTRotating swivel with safety stop. All external adjustments. Flexible hose with gear clamps.
1 MIDDLE JOINT All external adjustments. Flexible hose with gear clamps.
2 3HOOD JOINT Hood easy to move forward, backward and sideways. All external adjustments. Flexible hose with gear clamps
8
94
5
6
7
7
4
5
6
8
9600
600
standing version
Comparison
non
- non smooth airflow- higher static pressure- hard to clean- building on joint and compomnents
REM’s Fume Arms are the most versatile, durable and economical method for capturing air impurities at their source. The construction of stainless steel tubes, flexible hose at joints and external cast aluminium joints allow the arm to be positioned where needed. REM’s Fume arms come in diameters of 75, 100, 125, 160 and 200mm and lengths up to 4m.
All of REM’s Fume Arm can be easily equipped with a light kit or larger hood diameters. REM’s Fume Arms canbe easily used with REM’s Sliding Suction Rails, Extension Booms, Fans and Modular Units. For more specific information on REM’s Fume Arms contact your local REM Representative
Welding • Grinding • Polishing • Cutting • Soldering • Chemical Fumes and many more!
Applications:
All external Joints and Supports Air diverter and grab Handle all around the Hood
Standard damper
• industrial strength• versatile design• smooth tube contstruction• external joints and supports• hood and tube grab handles• air diverter in the hood• standard damper
Features:Benefits:
• long lasting life time• user-friendly operation• higher airflow preformance• easy to adjust and maintain• simple positioning• increased capture velocity• damper with-in the price
sSwinging Extension Booms REM’s swinging extension booms are designed to enlarge the reach of REM’s products, such as self supporting arms and vehicle exhaust equipment such as hose reels and flexible hoses. The extension boom helps in reaching areas which aredistant from wall or the mounting point. They also can be used to support items such as feeders or undersling hoses or cables. The swivel section of the boom is made of rolled steel pipe, which is caped at the bottom as standard. The top of the pipe, same as the bottom, is adapted to accept a fan or flanged duct connection. the extension beams are manufactured of heavy gauge square steel tube with bearing swivel. The spiral ducting mounted along the beam can be of 160mm or 200mm diameter. As a standard all units are
supplied with a bracket to mount REM fume arms. Doule pivot type extension booms are divided by a center bearing hinge which allows the user to reach back under the extension boom or just simply to reach around the corner.
Performance Features• Maximum recomended arm sizes
Single pivoting: up to 4m Double pivoting: up to 3m
• No internal construction• No suction loss• 1800 operation area (main pivot)• 1550 operation area (second pivot)• Possibility to undersling hoses or cables
Construction Features • Heavy Duty welded construction• Flexible hoses for ease of move• Ball bearing joints• 2 diameters F160 or F 200• Dual way of mounting exhaust system• Easy mount socket for Fume Arm or hose reel
Construction Features • Heavy Duty welded construction• Additional revolving round table• Built in downdraft exhaust• Two separate dampers (arm & bench)• 0,75kW Motor• Multiple motor voltages available• Thermal overload for motor• Possibility to connect to central filtering system
Performance Features• Arm supplied as standatrd
160mm x 2m• 76dB(a) level @ 1m• Manual dampers allow to control the air flow
Welding Table C-1000/N/L/A C1000 welding table has been designed to exhaust fumes appearing during the welding process. REM’s welding table makes perfect work space featuring fume arm an down draft exhaust which captures dangerous fumes. Supplied arm can be fitted with optional ligth kit and automatic photosensor, which can activate the fan unit, giving you the freedom to work efficiently and effectively. C1000 also features small round revolving table to give flexibility and easy access to the welded elements. Design of the table allows you to connect it to the central filtering system. Welding table can work with most dry dusts and fumes with restrictions to chemically aggressive or explosive gases.
Dimensions Unit
L [in] / [mm] 49.6 / 1260
S [in] / [mm] 33.9 / 860
H [in] / [mm] 33.7 / 855
L1 [in] / [mm] 15.7 / 400
D1 [in] / [mm] 6.3 / 160
D2 [in] / [mm] 13.8 / 350
R max (for 1620P) [ft.] / [m] 6.56 / 2
dimensionsWorking Area
Technical data
CF-1000
Airflow with arm* [cfm] / [m3/h] 600 / 1000
Weight 1 (without arm) [lb] / [kg] 265 / 120
Weight 2 (with arm 1620P) [lb] / [kg] 309 / 140
Motor power supply (voltage) [V] / phase /[Hz] 380 / 3 / 50
Motor power [HP] / [kW] 1 / 0.75
Configurations
C1000 Type Light-kit Exhaust Control
V00-01-C1000N None Manual
V00-01-C1000L Halogen light in the hood Manual
V00-01-C1000A Halogen light in the hood Automatic (photosensor)
Welding Table CF-1000/N/T/L/A CF1000 welding table has been designed to exhaust and filter fumes appearing during the welding process. REM’s welding table makes perfect work space featuring fume arm an down draft exhaust which captures dangerous fumes. CF1000 is fitted with filter unit featuring two stage filtration: spark trap and 2 poliester cartridges with a total filtering area of 12 m2. It is also equipped with compressed air cartridge cleaning system, which depending on the model can be activated manualy or by a timer. Arm can be fitted with optional ligth kit and automatic photosensor, which can activate the filter unit, giving you the freedom to work efficiently and effectively. CF1000 also features small round revolving table to give flexibility and easy access to the welded elements. Filter unit can work with most dry dusts and fumes with restrictions to chemically aggressive or explosive gases.
dimensionsWorking Area
Working area (with arm 1620P).
Technical data
Dimensions Unit
L [in] / [mm] 49.6 / 1260
S [in] / [mm] 33.9 / 860
H [in] / [mm] 33.7 / 855
L1 [in] / [mm] 15.7 / 400
D2 [in] / [mm] 13.8 / 195
R max (for 1620P) [ft.] / [m] 6.56 / 2
1
CF-1000
Airflow with arm* [cfm] / [m3/h] 700 / 1000
Weight 1 (without arm) [lb] / [kg] 309 / 140
Weight 2 (with arm 1620P) [lb] / [kg] 353 / 160
Motor power supply (voltage) [V] / ph/[Hz] 380/3/50
Construction Features • Heavy Duty welded construction• Additional revolving round table• Built in downdraft exhaust• Two separate dampers (arm & bench)• Built in Spark trap• 10l compressed air tank• 1,1kW Motor• Multiple motor voltages available• Thermal overload for motor
CF1000 Type Light-kit Exhaust Control Compressed Air Cleaning
V00-01-CF1000N None Manual Manual
V00-01-CF1000TN None Manual Timer
V00-01-CF1000L Halogen light in the hood Manual Manual
V00-01-CF1000TL Halogen light in the hood Manual Timer
V00-01-CF1000A Halogen light in the hood Automatic (photosensor) Manual
V00-01-CF1000TA Halogen light in the hood Automatic (photosensor) Timer
Performance Features• Arm supplied as standatrd
160mm x 2m• 2 Stage filtration
Stage 1: (1) Metal Mesh FilterStage 2: (1) Polyester Spun Bond Cartridge
RollOutFiltering unit RollOut REM’s Portable Filtering unit RollOut is designed to exhaust and filter dry impurities. A highly efficient filtering cartridge (up to USGC BIA category) makes it possible to use everywhere for processes such as welding, grinding, polishing, cutting of metals and plastics and much more. The RollOut is not designed for filtering the air from corrosive, caustic and explosive gases and dusts. The housing of The RollOut is manufactured of welded steel sheet. It is completely painted with polyester-epoxy powder paint. Inside there is an aluminium mesh (prefilter), which protects the cartridge from sparks and prefilters the air. Next there is main cartridge filter and a finaly carbon after-filter at the outlet. The cartridge filter is cleaned with a compressed air system which is located inside the cabinet (air tank with safety valve, pneumatic pulse valve). Cleaning is started with a palm button (manually controlled cleaning) and should be performed each time the airflow decreases or at the end of a work day (depending on usage). The RollOut filtering unit is also equipped with a heavy duty Electrical on/off switch. Large rear wheels mounted to the rear of the housing and swivel casters mounted to the front of the housing make easy for moving the unit to work area. A self-supporting Fume Arm model 1620P (160mm x 2m) or 1630P (160mm x 3m) can be mounted at the top of the unit.
Performance Features• Recomended optionaly supplied standard arm sizes
Arm Option 1: 160mm x 2m Arm Option 2: 160mm x 3m
• 3 Stage filtrationStage 1: (1) Metal Mesh FilterStage 2: (1) Polyester Spun Bond CartridgeStage 3: (1) Carbon after Filter
Construction Features • Heavy Duty welded construction• Heavy Duty Wheels and Swivel Castors• Full Width handle for ease of movement• Easy access to the filters• Low Center of Gravity to prevent tipping• Built in Spark trap• 10l compressed air tank• 1,5kW Motor• Multiple motor voltages available• Thermal overload for motor
dimensions
Working Area
RollOut
Airflow with arm* [cfm] / [m3/h] 615 / 1000
Weight 1 (without arm) [lb] / [kg] 275 / 125
Weight 2 (with arm 1630P) [lb] / [kg] 320 / 145
Motor power supply (voltage) [V] /ph/ [Hz] 380 / 3 / 50
REM fan units ty WR are equipped with backward inclined blade impeller of closed radial construction. WR units are meant for usage with non-explosive and chemically non-aggressive gases of temperature up to 40oC (313K).
WR units can be used for polluted air and light dusts (up to 0.5 g/m3) but should not be used to transport solid parts. Fans are constructed of powder coated welded sheet iron. They have aluminium impellers which are mounted directly on the motor shaft. The fan inlet has duct connection collar. See technical data table for fan/motor specifications. Noise value is maximal and measurement has been taken in the range of 1M from open fan outlet and with 6M duct connected to the fan inlet. 5dB(A) decrease should be expected when fans are connected to duct installation.
