Date post: | 18-Jan-2016 |
Category: |
Documents |
Upload: | preston-mccormick |
View: | 219 times |
Download: | 0 times |
Functions In Excel
A Function
• Performs a predefined operation • A function
• Accepts one or more arguments as input
• Performs the indicated calculation• Returns another value as output
Main Functions• Financial Functions• Statistical Functions• DATABASE Functions
Financial Functions
Financial Functions
• NPV• IRR• PMT• IPMT
• Be consistent about the units for specifying rate and nper• Monthly payments on a four-year loan at 12 percent
annual interest, use 12%/12 for rate and 4*12 for nper. • Annual payments on the same loan, use 12% for rate and 4
for nper
Internal Rate of Return (IRR) and
Net Present Value (NPV) Net present value (NPV): the sum of the present values of all cash inflows minus the sum of the present values of all cash outflows. The internal rate of return (IRR): (1) the discount rate that equates the sum of the present values of all cash inflows to the sum of the present values of all cash outflows; (2) the discount rate that sets the net present value equal to zero. The internal rate of return measures the investment yield.
PMT and IPMT
• PMT- This function calculates the payment for a loan based on constant payments and constant interest rate
• IPMT- This function calculates the interest payment based on periodic , constant payments and a constant interest rate
NPV
• NPV(rate,value1,value2,…)• Rate is the rate of discount over the length of
one period• Value1,value2,… must be equally spaced in
time and occur at the end of each period
IRR
• IRR(values,guess)• Values are an array or a reference to cells that
contains numbers for which you want to calculate the internal rate of return
• Guess is a number that you guess is close to the result of IRR
PMT
• PMT(rate,nper,pv,fv,type)• Rate is the interest rte of the loan• Nper is the total number of payments for the
loan• Pv is the present value• Fv is the future value• Type is the number 0 or 1 and indicates when
payments are due
IPMT
• IPMT(rate,per,nper,pv,fv,type)• Rate is the interest rate per period• Per is the period for which you want to find the interest
and must be in the range 1 to nper• Nper is the total number of payment periods in an
annuity• Pv is the present value• Fv is the future value• Type is the number 0 or 1 and indicates when payments
are due
Statistical Functions in
Excel
Statistical functions
Excel has a wide variety of built-in statistics functions that give, the standard and mean deviation of a data sample, and the mean, median and mode of a set of values.
1. Average Function
Returns the average (arithmetic mean) of the arguments.
Syntax ::: AVERAGE(number1,number2,...)Number1, number2, ... are 1 to N numeric arguments forwhich you want the average.
Example ::: Data = 10,7,9,27,2
AVERAGE(A2:A6) Average of the numbers above (11)
AVERAGE(A2:A6, 5) Average of the numbers above and 5 (10)
2 . Median Function Returns the median of the given numbers.
The median is the number in the middle of a set of numbers; that is, half the numbers have values that are greater than the median, and half have values that are less.
Syntax ::: MEDIAN(number1,number2,...)Number1, number2, ... are 1 to N numeric arguments for
which you want the median.
Example ::: Data = 1,2,3,4,5,6
MEDIAN(A2:A6) Median of the first 5 numbers in the list above (3)
MEDIAN(A2:A7) Median of all the numbers above, or the average of 3 and 4 (3.5)
3. AVEDEV Function Returns the average of the absolute
deviations of data points from their mean. AVEDEV is a measure of the variability in a data set.
Syntax ::: AVEDEV(number1,number2,...)Number1, number2, ... are 1 to 30 arguments for which you want the average of the absolute deviations. You can also use a single array or a reference to an array instead of arguments separated by commas. The equation :
Example ::: Data = 4,5,6,7,5,4,3
AVEDEV(A2:A8) Average of the absolute deviations of the numbers above from their mean (1.020408)
4 . STEDEV Function Estimates standard deviation based on a
sample. The standard deviation is a measure of how widely values are dispersed from the standard value.
Syntax ::: STDEV(number1,number2,...)Number1, number2, ... are 1 to 30 number arguments corresponding to a sample of a population. You can also use a single array or a reference to an array instead of arguments separated by commas.
The equation:
5. CORREL Function
Returns the correlation coefficient of the array1 and array2 cell ranges. Use the correlation coefficient to determine the relationship between two properties. For example, you can examine the relationship between a location's average temperature and the use of air conditioners.
Syntax ::: CORREL(array1,array2)Array1 is a cell range of values.Array2 is a second cell range of values.
The equation :
6. RANK Function Returns the rank of a number in a list of
numbers. The rank of a number is its size relative to other values in a list. (If you were to sort the list, the rank of the number would be its position.)
Syntax ::: RANK(number,ref,order)
Number is the number whose rank you want to find.
Ref is an array of, or a reference to, a list of numbers. Nonnumeric values in ref are ignored.
Order is a number specifying how to rank number.
• If order is 0 (zero) or omitted, Microsoft Excel ranks number as if ref were a list sorted in descending order.
• If order is any nonzero value, Microsoft Excel ranks number as if ref were a list sorted in ascending order
Database Functions in
Excel
Introduction
• In this information age, the major challenge for every organization is to keep proper database in order to prosper in the future.
• Databases are store-houses of information.• Provides latest information.• Database is an organized collection of related
information about a particular subject or purpose.• Information in database is stored in rows and
columns• Ms-Excel also contains a good database which is
a collection of information that is organized so that it can easily be accessed, managed, and updated
Computer D a t a Hierarchy pyramid
DB
FILE
TABLE
RECORD
FIELD
DATA
Bits and bytes
Traditional databases are organized by fields, records, and files. A field is a single piece of information; a record is one complete set of fields; and a file is a collection of records.
To access information from a database, you need a database management system (DBMS). This is a collection of programs that enables you to enter, organize, and select data in a database.
The following figure shows the basic layout of a database table:
1. DAVERAGE Function
Averages the values in a column of a list
or database that match conditions you specify.
Syntax ::: DAVERAGE (database,field,criteria)
• Database is the range of cells that makes up the list or database.
• Field indicates which column is used in the function. Field can be given as text with the column label enclosed between double quotation marks, such as “-----” as a number that represents the position of the column within the list
• Criteria is the range of cells that contains the conditions you specify
2. DSUM Function
Adds the numbers in a column of a
list or database that match conditions you specify.
Syntax ::: DSUM (database,field,criteria)
• Database is the range of cells that makes up the list or database.
• Field indicates which column is used in the function. Field can be given as text with the column label enclosed between double quotation marks, such as ”------” or as a number that represents the position of the column within the list
• Criteria is the range of cells that contains the conditions you specify
3. DMAX Function
Returns the largest number in a column
of a list or database that matches conditions
you specify.
Syntax ::: DMAX(database,field,criteria)
• Database is the range of cells that makes up the list or database.
• Field indicates which column is used in the function. Field can be given as text with the column label enclosed between double quotation marks, such as “-----” or as a number that represents the position of the column within the list
• Criteria is the range of cells that contains the conditions you specify
4. DMIN Function
Returns the largest number in a column
of a list or database that matches conditions
you specify.
Syntax ::: DMIN(database,field,criteria)
• Database is the range of cells that makes up the list or database.
• Field indicates which column is used in the function. Field can be given as text with the column label enclosed between double quotation marks, such as “-----” or as a number that represents the position of the column within the list
• Criteria is the range of cells that contains the conditions you specify