Fuse, Disconnect & Test Terminal Blocks

100% spring clamp technology. The safe alternative.

Innovations for Even Greater Safety

TOPJOB®S disconnect terminal block in 2- and 4-conductor and double-deck design

TOPJOB®S double-deck disconnect terminal block

Product ProfileTOPJOB®S 2- and 4-conductor fuse disconnect (pivot) terminal blocks (with and without indication)

TOPJOB®S 2- and 4-conductor blade-type fuse terminal block

TOPJOB®S 2- and 4-conductor carrier terminal blocks for fuse plug (with and without indication)

Terminal block width: 5.2 mm6.2 mm includes end plate for fuse disconnect (pivot style)Cross-section range: 22-12 AWG(14 AWG max with ferrule)Rated Voltage/Current: Depen-dent upon fuse or indicator

Product ProfileTOPJOB®S 2- and 4-conductor and double deck disconnect terminal blocks, Series 2002Terminal block width: 5.2 mmCross-section range: 22-12 AWG(14 AWG max with ferrule)Rated voltage: 300 VRated current: 15 A

TOPJOB®S pivot style fuse terminal block

TOPJOB®S blade-type fuse terminal block

TOPJOB®S fuse plug carrier terminal block

NEW

NEW

Advantages and safety-related features:•Automatic short-circuiting of the transformer secondary winding•Jumper position at bottom of terminal block for preparing to short-circuit transformer•Latching switch lock prevents accidental opening/disconnec- tion in both switch positions•Simultaneousswitchingofupto4terminalblocksbymeans of transparent cover clipped to disconnect link•Jumperpositionontransformersideforcircuit-relatedcross- bridging•TouchprooftestsocketsforØ4mmtestplugs•OneCAGECLAMP® connection on the transformer side, two on the measuring side

Short-circuit jumper position

P

B

A

P

12

P

B

P

12 ~

P

B

P

12

P

B

P

12

Normal Operation

Transformer Short-Circuit

MeasurementTesting

Relay Testing

Automatically and Safely Shorted Longitudinal Disconnect Terminal Blocks for Current Transformer CircuitsWith these disconnect and test terminal blocks for current transformer circuits, the transformer secondary winding is automatically short-circuited when the screwless, pivoting disconnect link is switched over. There are no undefined intermediate positions. The terminal blocks are prepared for short-circuiting the transformer by the single action of plugging in a short-circuit jumper.

Switchable rail-mounted terminal blocks for current transformer secondary circuits

The advantages in detail:•Captive storage of short-circuit jumper in pre-latching position•IntegralinsulatedtestsocketsforØ4mmtestplugs on the transformer and measuring side•Couplingdeviceforsimultaneousoperationof several switch levers•Recessedswitchleverpreventsaccidentaloperation•Switchlocksafeguardsthecurrentswitchingstate•Threemarkingoptions•Dimensions:only8x46.5x98mm(WxHxD)

Jumpers

Transformer test circuits (reference measurement, transformer short-circuit and relay testing) can be implemented particularly in a cost-effective way with just two longi-tudinal disconnect terminal blocks - without loss of clarity and safety.

Compact and Economic Longitudinal Disconnect Terminal Blocks for Current Transformer Circuits

Normal Operation

Transformer Short-Circuit

MeasurementTesting

Relay Testing

Switchable rail-mounted terminal blocks for current transformer secondary circuits

•Insulated circuit jumpers for linking several termi- nal blocks depending on circuit requirements•Recessedswitchleverpreventsaccidentalope- ration•IntegralinsulatedtestsocketsforØ4mmtest plugs on the transformer side•Couplingdeviceforsimultaneousoperationof several switch levers•Threemarkingoptions•Dimensions:8x37.5x89mm(WxHxD)

Normal Operation

Transformer Short-Circuit

MeasurementTesting

Functional and Safe Transverse Disconnect Terminal Blocks for Current Transformer Circuits

Short-circuit jumper

Withadepthofonly89mm,thetransverse disconnect terminal block is currently the most com-pact screwless terminal block of its kind. It provides clear and cost-effective short-circuiting of current transformers.

Type Series Description Details

280 280-870280-874 5 mm wide28-12AWG 15 A/600 V

281 281-6248mmwide28-12AWG 10 A/600 V

282 282-6978mmwide 24-10 AWG 30 A/600 V

742 742-101742-151742-1535mm/5.08mmwide28-12AWG 10 A/300 V

2002 2002-16712002-18712002-29512002-29582002-2971 5.2 mm wide28-12AWG 15 A/300 V

2006 2006-16717.5mmwide20-8AWG 30 A/600 V*

282 282-860282-870282-821282-8118mmwide 24-10 AWG 30 A/600 V

280/281 280-912280-683280-836280-685281-912281-683281-659

5/6 mm wide28-12AWG 15 A/300 V

280 280-622280-612 5 mm wide28-12AWG 15 A/300 V

280 280-521280-522280-563280-566280-573280-576 5 mm wide28-12AWG 10 A/300 V

280/281 280-829280-649280-627281-666

5/6 mm wide28-12AWG 15 A/300 V

769 769-232769-222769-212769-202769-242 5 mm wide28-12AWG 10 A/300 V (5 A/600 V)

DisconnectTerminalBlocksforTestandMeasurementDi

scon

nect

Tab

Knife

Disc

onne

ct

Plug-in wiring to disconnect terminal blocks

Disconnect link removable by hand

Test, measurement and disconnect PCB block

Staggered jumpers for sophi-sticated circuit requirements

Female pluggable connector with jum-per slots , since jumpers do not fit in terminal blocks with disconnect tab

The use of WAGO disconnect terminal blocks or disconnect/test terminal blocks gives you the following advantages:

Connection: •CAGECLAMP® connection for solid and stranded conductors up to 10 AWG•CAGECLAMP®S connection Series 2002 for solid and stranded conductors up to 12AWGandSeries2006upto8AWGenablesdirectinsertionofsolidandstranded conductors with ferrules•Multi-conductorblocksforcircuitmultiplicationwithoutjumpersoradditionalterminal blocksFunction: •Screwless disconnect mechanism, easy-to-use pivoting knife disconnect or pull disconnect tab•ClearswitchingstateindicatorDesigns: •Disconnect/test terminal blocks for printed circuit boards, i.e. the transposition of rail-mounted terminal block functions to the printed circuit board•Disconnectfunctionalsoincludedinmulti-level,rail-mountedterminalblocksandterminal blocks for sensors and actuators•WAGOX-COM-SYSTEMdisconnectpluggbleterminalblocksenaablemodulestobe pre-assembled with plug-in wiring•Savespaceinthelengthwisedirection:TOPJOB®S double-deck disconnect terminal blocks Extras: •Disconnectors available in different colors, e.g. to differentiate between different signal groups•Thesameshapeascorrespondingthroughterminalblocksprovideclarityandeaseof inspection•Permanenttestsocketsoroptionaltestmodules•Numerousjumpersystemsforcommoningontheinputand/oroutputsideforsafeand cost-effective implementation of sophisticated circuit requirements

Two disconnect terminal blocks with different voltages in a width of only 5.2 mm

*UL Pending (ratings subject to change)

Type Series Description Details

280 280-870280-874 5 mm wide28-12AWG 15 A/600 V

281 281-6248mmwide28-12AWG 10 A/600 V

282 282-6978mmwide 24-10 AWG 30 A/600 V

742 742-101742-151742-1535mm/5.08mmwide28-12AWG 10 A/300 V

2002 2002-16712002-18712002-29512002-29582002-2971 5.2 mm wide28-12AWG 15 A/300 V

2006 2006-16717.5mmwide20-8AWG 30 A/600 V*

282 282-860282-870282-821282-8118mmwide 24-10 AWG 30 A/600 V

280/281 280-912280-683280-836280-685281-912281-683281-659

5/6 mm wide28-12AWG 15 A/300 V

280 280-622280-612 5 mm wide28-12AWG 15 A/300 V

280 280-521280-522280-563280-566280-573280-576 5 mm wide28-12AWG 10 A/300 V

280/281 280-829280-649280-627281-666

5/6 mm wide28-12AWG 15 A/300 V

769 769-232769-222769-212769-202769-242 5 mm wide28-12AWG 10 A/300 V (5 A/600 V)

DisconnectTerminalBlocksforTestandMeasurement

Type Series Description Details

281281-611**(5x20mm)281-613**(1/4”x1”)281-612**281-623**(1/4”x11/4”)281-622**

8/10mmwide28-12AWG 10 A/600 V (1)

2002 2002-1611**(5x20mm)2002-1811**(5x20mm) 6.2 mm wide 22-12 AWG 6.3 A/250 V (1)

20062006-1611**(5x20mm)2006-1631/099-000**(1/4x11/4;2.5W) 2006-1621** (5x30mm)2006-1631**(1/4x11/4;1.6W)

7.5mmwide20-8AWG 20 A/600 V* (1)

280 280-850**(250mAFF),280-852**(500mAFF),280-854**(1AFF),280-856**(2AFF) 5 mm wide 5 A/125 V (1)

281 281-511,281-512** 6 mm wide (2) 6.3 A/250 V (1)

280 280-616280-606280-916280-610280-686280-816 5 mm wide (2)28-12AWG(1)

281 281-916281-610281-656 6 mm wide28-12AWG(1)

280 280-531280-532280-510 5 mm wide (2)28-12AWG(1)

280 280-565280-575280-588280-561280-571 5 mm wide (2)28-12AWG(1)

769 769-161769-181769-191 5 mm wide (2)28-12AWG(1)

2004 2004-911**(5x20mm) 6.1 mm wide (2) 6.3 A/250 V (1)

2002 2002-16612002-1861 5.2 mm wide (2) 22-12 AWG (1)

2006 2006-911**(5x20mm);2006-931**(1/4x11/4;1/6W)2006-921**(5x30mm);2006-931/099-000**(1/4x11/4;2.5W)

7.5mmwide 10 A/600 V* (1)

2006 2006-16617.5mmwide(2)20-8AWG(1)

Fuse

Disc

onne

ct (P

ivot)

Term

inal

Blo

ckFu

se P

lug

Mod

ule

Carri

er Te

rmin

al B

lock

s fo

r280

/281

Plu

gsTO

PJO

B®S

Fuse

Plu

g an

d Ca

rrier

Blo

cks

* UL Pending (ratings subject to change)**Availablewithindication;contactfactoryforpartnumbersuffix.(1) The electrical data is defined by the fuse and blown fuse indication respectively.(2) 6 mm wide fuse plug modules may be used with 5 mm wide carrier terminal blocks when the terminal block is used with an end plate.

Fuse Terminal BlocksWAGO fuse terminal blocks are distinguished by the following product features/advantages:

Fuse disconnect terminal blocks with pivoting fuse holder:•Fuse holder with or without blown fuse indication•Sparefusestoragefacilityinthecaseoffuseholderswithoutblownfuseindication•Varioustestoptions•“Touchproof“protectioninallpositionsofthefuseholderFuse plugs for carrier terminal blocks:•Fuse plugs with or without blown fuse indication•Noriskoftouchinglivepartswhenchangingfuses•Fuseplugscanberetainedbyservicepersonnelduringmaintenancework avoiding unintentional restarting•Twotestslots•Canalsobeusedasadisconnectplugwithshort-circuitjumper•Fuseplugwithsolderedminiaturefuseonly5mmwide–enableshighpacking densityFuse terminal blocks for mini-automative blade-type fuses (shown on next page):•For currents up to 30 A•Withorwithoutblownfuseindication•Separatetestslotsfortouchcontacttesting•AlsosuitableforthermalautomotivecircuitbreakersFuse terminal blocks for printed circuit boards:•Transposition of rail-mounted terminal block functions to the printed circuit board•2-and3-conductorterminalblocksforcircuitmultiplicationwithoutjumpersand additional terminal blocks•Separatetestslots

Testing fuse terminal blocks

As a general principle, all WAGO fuse terminal blocks are fitted with CAGE CLAMP®orCAGECLAMP®S connection for solid, stranded and ferruled conduc-tors.Multi-conductorterminalblocksorplug-injumpersystemsenableinputpathsto be distributed between several individual fused circuits. Through terminal blocks with the same shape create order and clarity. In addition to fuse plugs, carrier ter-minal blocks may also be use with plug-in diodes, indicator modules and multi-pole interface modules.

Type Series Description Details

281281-611**(5x20mm)281-613**(1/4”x1”)281-612**281-623**(1/4”x11/4”)281-622**

8/10mmwide28-12AWG 10 A/600 V (1)

2002 2002-1611**(5x20mm)2002-1811**(5x20mm) 6.2 mm wide 22-12 AWG 6.3 A/250 V (1)

20062006-1611**(5x20mm)2006-1631/099-000**(1/4x11/4;2.5W) 2006-1621** (5x30mm)2006-1631**(1/4x11/4;1.6W)

7.5mmwide20-8AWG 20 A/600 V* (1)

280 280-850**(250mAFF),280-852**(500mAFF),280-854**(1AFF),280-856**(2AFF) 5 mm wide 5 A/125 V (1)

281 281-511,281-512** 6 mm wide (2) 6.3 A/250 V (1)

280 280-616280-606280-916280-610280-686280-816 5 mm wide (2)28-12AWG(1)

281 281-916281-610281-656 6 mm wide28-12AWG(1)

280 280-531280-532280-510 5 mm wide (2)28-12AWG(1)

280 280-565280-575280-588280-561280-571 5 mm wide (2)28-12AWG(1)

769 769-161769-181769-191 5 mm wide (2)28-12AWG(1)

2004 2004-911**(5x20mm) 6.1 mm wide (2) 6.3 A/250 V (1)

2002 2002-16612002-1861 5.2 mm wide (2) 22-12 AWG (1)

2006 2006-911**(5x20mm);2006-931**(1/4x11/4;1/6W)2006-921**(5x30mm);2006-931/099-000**(1/4x11/4;2.5W)

7.5mmwide 10 A/600 V* (1)

2006 2006-16617.5mmwide(2)20-8AWG(1)

Type Series Description Details

282 282-696**8mmwide* 24-10 AWG 30 A/600 V (1)

2006 2006-1681**7.5mmwide*20-8AWG 30 A/600 V UL Pending (1)

2002 2002-16812002-1881 5.2 mm wide 22-12 AWG 10 A/300 V (1)

742(PCB)

742-111742-161742-1635/5.08mmwide28AWG 10 A/300 V (1)

DINRailMountPluggableThermalCircuit Breakers DIN rail mount pluggable miniature thermal circuit breakers are used for pro-tection of power distribution systems, automation systems, and process control applications. These wide variety of circuit breakers have unique characteristics that tailor to the needs and performance of many different applications.

TheWAGOcircuitbreakerterminalblockusesCAGECLAMP® connection tech-nology that reduces wiring time and provides a connection that is corrosion-resis-tant, temperature cycling resistant and maintenance-free. An excellent alternative to traditional fusing methods.

Item Pack.-unit No. pcs

Description

0.10 A AC 250 V DC 65 V0.25 A AC 250 V DC 65 V0.5 A AC 250 V DC 65 V1.0 A AC 250 V DC 65 V2.0 A AC 250 V DC 65 V3.0 A AC 250 V DC 65 V4.0 A AC 250 V DC 65 V5.0 A AC 250 V DC 65 V 6.0 A AC 250 V DC 65 V7.0A AC250V DC65V8.0A AC250V DC65V10.0 A AC 250 V DC 65 V

Thermal circuit breaker, plug-in type, on-off switch, switching duty rated

Typical time/current characteristics at +23°C/+73.4° F

Voltagerating:AC250V;DC65VCurrent ratings: 0.1...10 ATypical life: 3,000 operations at 1 x IN (low-resistive) 500 operations at 2 x IN (inductive)Ambient temperature: -20...+60°C (T 60) -4...+140°FInsulation co-ordination: Rated impulse Pollution(IEC 60664 and 60664A) withstand voltage degree 2.5 kV 2 reinforced insulation in operating areaInsulationresistance:>100MΩ (DC 500 V)

Technical Data

Interrupting capacity: AC 250 V: 2,000 A(UL1077) DC 65 V: 200 AVibration:5g(57-500Hz)±0.38mm(10-57Hz)toIEC60068-2-6,testFc, 10 frequency cycles/axisShock: 25 g (11 ms) toIEC60068-2-27,testEaCorrosion:96hoursat5%saltmist, to IEC60068-2-11,testKaHumidity:240hoursat95%RH toIEC60068-2-3,testCa

51216518 151012494 151012495 151012496 151012497 151012498 151012499 151012500 151012501 151014523 151012502 151012503 1

Auto

mot

ive

Fuse

or C

ircui

t Br

eake

r

*Mayrequireendplateforusewithpluggablecircuitbreakers.(Takenoteofterminalblockwidthandcircuitbreakerwidth.)**Availablewithindication;contactfactoryforpartnumbersuffix.(1) The electrical data is defined by the fuse and blown fuse indication respectively.

ProductWidth:8.2mm

Min

i-Au

tom

otive

Fu

se

Item No. Description Pack. Unit Color

51220026 2A, 32VDC 100 Grey

51220027 3A, 32VDC 100 Violet

51220028 4A, 32VDC 100 Pink

51220029 5A, 32VDC 100 Tan

51220030 7.5A,32VDC 100 Brown

51220031 10A, 32VDC 100 Red

Automotive and Mini-Automotive FusesItem No. Description Pack. Unit Color

51220014 1A, 32VDC 100 Black

51220015 2A, 32VDC 100 Grey

51220016 3A, 32VDC 100 Violet

51220017 4A, 32VDC 100 Pink

51220018 5A, 32VDC 100 Tan

51220019 7.5A,32VDC 100 Brown

51220020 10A, 32VDC 100 Red

51220021 15A, 32VDC 100 Blue

51220022 20A, 32VDC 100 Yellow

51220023 25A, 32VDC 100 Natural

51220024 30A, 32VDC 100 Green

51014338 151014339 151014340 1

51014689 1

Item Pack.-unit No. pcs

Description

Miniaturizedthermalautomotivecircuitbreaker,colorcoded, manual release15ADC28V20ADC28V25ADC28VMiniaturizedthermalautomotivecircuitbreaker,on-offswitch15ADC28V

Typical time/current characteristics at +23°C/+73.4° FVoltagerating:DC28VCurrent ratings: 3...25 A (30 A upon request)Typical life: 6,000 operations at IN

3,000 operations at 2 x IN ≤ 20 A 1,000 operations at 2 x IN 25 A Ambient temperature: -30...+60°C (-22...140°F)Interrupting capacity ICN: 3...15 A 200 A 3...15 A 400 A 20...25 A 400 A

Technical Data

Vibration3or4A:8g(57-500Hz)±0.65mm(10-57Hz)5...25A: 10g(57-500Hz)±0.76mm(10-57Hz),toIEC60068-2-6,testFc, 10 frequency cycles/axisShock 3 or 4 A: 35 g (11 ms) 5...25 A: 50 g (11 ms)toIEC60068-2-27,testEACorrosion: 96hoursat5%saltmist,to IEC60068-2-11,testKaHumidity:240hoursat95%RHto IEC60068-2-3,testCa

51016020 151014617 151014618 151014619 1

Item Pack.-unit No. pcs

Description

Thermal automotive circuit breaker, color coded housing, standard fuseblock mounting 15ADC28V20ADC28V25ADC28V30ADC28V

Typical time/current characteristic curve

Voltage rating: DC 32 VCurrent ratings: 6...30 AService short-circuit breaking capacity: 300 operations at ≤ 50 A Ambient temperature: -30...+60°C (-22...140°F)Ultimate short-circuit breaking capacity: ≥ 3 break operations at 150 A, or ≥ 1 break operation at 2,000 A

Technical Data

Vibration:5g(57-500Hz)±0.38mm(10-57Hz)(with mounting socket 12)toIEC60068-2-6,TestFc, 10 frequency cycles/axisShock: 25 g (11 ms)(with mounting socket 12) toIEC60068-2-27,TestEaCorrosion:96hoursat5%salt.mist,to IEC60068-2-11,testKaHumidity: 240hoursat95%RHto IEC60068-2-3,testCa

Fast Acting Mini-Auto Fuse

Fast Acting Auto Fuse

ProductWidth:9.8mm

Product Width: 6 mm

WAGO CorporationN120W19129FreistadtRoadGermantown, Wisconsin 53022Telephone:800/DINRail(346-7245)Fax: 262 / 255-3232info.us@wago.comwww.wago.us

5123

5484

088

8-08

32/0

000-

0206

Prin

ted

in th

e U

nite

d St

ates

GermanyWAGO KontakttechnikMindenTel.++49/571/887/0 Fax++49/571/887/169

Austria WAGO Kontakttechnik Wien Tel. ++43/1/615/07/80 Fax ++43/1/615/07/75

Belgium WAGO Kontakttechnik Zaventem Tel. ++32/2/7/17/90/90 Fax ++32/2/7/17/90/99

China WAGO ELECTRONIC Co. Ltd. Tianjin Tel++86/22/59617688 Fax ++86/22/59617668

England WAGO, Ltd. Rugby Tel. ++44/1788/568008 Fax ++44/1788/568050

France WAGO CONTACT S.A. Paris Tel. ++33/148172590 Fax ++33/148632520

ItalyWAGO ELETTRONICA SRLCasalecchio di Reno (BO)Tel. ++39/051/6132112Fax ++39/051/6272174

Japan WAGO Co. of JAPAN Ltd. Tokyo Tel. ++81/3/5627/2050 Fax ++81/3/5627/2055

Poland WAGOELWAGsp.zo.o. Wroclaw Tel. ++48/71/3604670/78 Fax ++48/71/3604699

Singapore WAGO Electronic Pte. Ltd. Singapore Tel. ++65/62866776 Fax ++65/62842425

Switzerland WAGO CONTACT SA Domdidier Tel. ++41/26/676/75/86 Fax ++65/26/676/75/01

MexicoWAGO CorporationQueretaroTel. 001/800/309/5975 +52/442/221/5946Fax + 52/442/221/5063

CanadaWAGO CorporationTel.800/DINRail(346-7245)Fax 262/255-3232

WAGO Service Worldwide