Two Concourse Parkway, Suite 800, Atlanta, GA 30328 © Elavon Incorporated 2015. All Rights Reserved
Fusebox User Setup Administration Guide
July, 2015
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 i
Copyright
Copyright © 2015 Elavon Incorporated. All rights reserved. No part of this publication may be reproduced or distributed without the prior consent of Elavon Inc., Two Concourse Parkway, Suite 800, Atlanta, GA 30328.
Disclaimer
Elavon Inc. provides this publication as is without warranty of any kind, either expressed or implied. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These changes will be incorporated in new editions of the publication. Elavon Inc. may make improvement and/or changes in the product(s) and/or programs(s) described in this publication at any time.
Trademarks
Fusebox is a registered trademark of Elavon Inc. All other brand and product names are trademarks or registered trademarks of their respective companies.
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 ii
Preface This document describes step by step procedures on how to use your User Setup Guide including:
• User Setup Overview
• Setting Up a New User
• Editing User Information
• Profile and Entitlement Options
This document is intended for all users of the Fusebox User Setup product and contains the information necessary for you to be able to use all the features of the product effectively.
Typographical Conventions
Throughout this guide, you will see words and phrases that appear in different fonts and formats. The following list describes the typographical conventions used in this guide.
• Bold text Indicates a menu option, a window title, buttons, and so on that you can use to identify a part of the user interface.
Example:
Print or Save As dialog box
• Menu selection sequences Indicates a series of menu options that you need to select in a particular sequence and listed in one step. Each menu option is separated by a pipe ( | ).
1. Choose File | Save As | File Name and enter the name of the document.
• Courier text Indicate examples of software code. Usually this type of text is encapsulated in a code box as illustrated below.
Begin Header
<head> <title>Batch Import</title>
</head> End Header
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 iii
• Bold courier text Indicates a command that you would type into a command prompt window as illustrated below.
cd c:\users\
• Italicized text Indicates that the word or phrase is:
• Emphasized for clarification as illustrated below.
You do not need to select Apply.
• The word is replacement text, such as a variable for a piece of code that you need to enter the appropriate value for your implementation as illustrated below.
<xml>
<country_code>Country Code</country_code>
</xml>
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 iv
Revision History
The following table provides a description of the changes made to this document from its origination to the current release.
Revision Date Revision Notes
First Edition - Orig
AUG-2010 Original
Second Edition – A
NOV-2010 Added Quick View and Quick Edit
Third Edition – B
AUG-2012 Fusebox 8.4 Release
Fourth Edition – C
NOV-2012 Fusebox 8.5 Release
Fifth Edition – A
JUL-2013 The document numbering has changed in this revision. The previous document number FUS-01-082012 is now replaced with FSB-0027-A.
Sixth Edition – B
OCT-2013 Updated for changes in November 2013 release.
Seventh Edition – C
FEB-2014 Updated for February 2014, 9.0 release
Eighth Edition – D
APR-2014 Updated for April 2014, 9.1 release:
PR-14561 – Reset password messages PR-14776 – Clone User
Ninth Edition – E
APR-2015 New template.
Tenth Edition – F
JULY-2015 PR-14928 Clone User Enhancement and Allowing E-mail Address Updates.
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 v
Table of Contents Title Chapter 1: User Setup Overview ........................................................................................................ 1
External Administrators ....................................................................................................................... 1
User Profiles and Entitlements ............................................................................................................. 2
Chapter 2: Setting Up a New User ...................................................................................................... 3
How to Add a New User ....................................................................................................................... 3
Add User Information ...................................................................................................................... 4
Assign Profiles and Entitlements ...................................................................................................... 8
Assign User Hierarchies ..................................................................................................................... 12
Hierarchy Search using Property Search ......................................................................................... 13
Hierarchy Search using Navigate Tree ............................................................................................ 14
Confirm and Save User ................................................................................................................... 17
Miscellaneous Hierarchy Information ................................................................................................ 20
Select the Hierarchy View .............................................................................................................. 20
Track Hierarchy Nodes ................................................................................................................... 20
Chapter 3: Editing User Information................................................................................................. 22
How to Modify User Information ....................................................................................................... 23
How to Clone User ............................................................................................................................. 26
How to Conduct a New Search ........................................................................................................... 30
To See a Quick View ....................................................................................................................... 30
To Do a Quick Edit.......................................................................................................................... 31
How to Edit User Profile .................................................................................................................... 32
How to Edit Account Status ............................................................................................................ 34
How to Deactivate an Existing User ................................................................................................ 35
How to Activate an Existing User .................................................................................................... 38
How to Reset a User Password ....................................................................................................... 39
Password Resets ............................................................................................................................ 40
How to Update External User E-mail Address ................................................................................. 42
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 vi
Chapter 4: Profile and Entitlement Options...................................................................................... 44
General Tab Profile Options ............................................................................................................... 45
General Tab Profile Grantor Options - Grant ...................................................................................... 46
Case Management Profile Options ..................................................................................................... 47
Grant Management Grantor Profile Options - Grant .......................................................................... 47
Batch and Transaction Management Profile Options ......................................................................... 48
Batch Management Grantor Profile Options ...................................................................................... 49
BMUI Ships Profile Options ................................................................................................................ 49
Reporting Profile Options .................................................................................................................. 50
File-based Activities Profile Options ................................................................................................... 51
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 1
Chapter 1: User Setup Overview
This chapter provides an overview of key information you need to know in order to add new users to the Fusebox system as well as how to manage user profiles and permissions. You will also find instructions on how the administrator uses the User Setup application to manage users in the Fusebox portal.
Topics in this chapter include:
• External Administrators
• User Profiles and Entitlements
External Administrators
An external administrator is created by a Fusebox technical support representative who has the entitlements to set up new administrators. This is done by completing the User Access Request
Form – External and submitting it to the Fusebox Technical Support Desk or by contacting the Fusebox representative.
Customers must establish their own Fusebox administrator. The external administrator can assign other users to be the external administrator role, if desired. The external administrators can:
• Create a new user
• Assign or change the hierarchy, entity and/or site for obtaining the information the user needs
• Modify an existing user
• Deactivate a user
• Reactivate a user
• Reset a user’s password
The user login is tied to the role the user performs at their job. The administrator assigns users the correct entitlements to work with the Fusebox application and which hierarchy they need to access to perform various functions and access specific applications within the portal.
Fusebox User Setup Administration Guide FSB-0027-F
© Elavon, Incorporated 2015 2
Once the administrator creates the user, two system-generated e-mails are sent to the new user. The first e-mail notifies the new user of their User ID and contains instructions on how to access the system. The second e-mail contains the user’s temporary password. If the user does not have an e-mail, the external administrator contacts the user individually to give them the user name and temporary password.
An administrator can see the temporary password for the user without an e-mail address, but they cannot see a temporary password for a new user that has an e-mail address. No one has access to an individual’s personal password that they created.
User Profiles and Entitlements
This chapter provides the system functions and technical details that administrators need to do the following:
• Set up and configure system users
• Deactivate users to remove access to the system
• Unlock users who have been locked out of the system due to exceeding the number of failed login attempts
• Modify user preferences
The Fusebox portal is designed to handle a variety of tasks, requiring different users to perform various functions within the system. A user’s ability to perform specific functions or view certain information is based on access permissions tied to each user profile.
Entitlements are grouped as a set of privileges, and the administrator assigns users a group of entitlements or a profile set. Users will only see data pertaining to the hierarchy node that they are assigned and the sites associated with that hierarchy level. If a user needs access to different entitlements than those available in one set, they are assigned another profile which includes the entitlements needed.
When the user logs into Fusebox, the system recognizes their entitlements and hierarchies through the user profile. Entitlements are used by the UI and web services to show or hide user actions and hierarchy information.
• When referring to this document, be aware that you may not have access to every feature application or profile described because access is restricted by your user role and entitlements
• There are two parts to a user’s profile, including the applications for which they have access rights and the data for the entity or site the application uses
• Users may also grant application access to another user even if they do not have access themselves
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 3
Chapter 2: Setting Up a New User This chapter provides instructions on how to set up a new user in Fusebox. It also describes the features and configuration options in the User Setup application to manage users in the Fusebox portal.
Topics include:
How to Add a New User
• Add User Information
• Assign Profiles and Entitlements
• Add User Hierarchies
• Confirm and Save User
Miscellaneous Hierarchy Information
• Select the Hierarchy View
• Track Hierarchy Nodes
How to Add a New User
To add a new user to Fusebox, the administrator does the following:
1. Enter user information.
Add the user to the system including their user name, name, and contact information.
2. Assign profiles to user account. Profiles contain groups of entitlements to the system.
3. Assign hierarchy nodes. Assign specific levels of the merchant hierarchy the user can view in the system.
4. Confirm the user account setup.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 4
Add User Information
To add a new user, do the following:
1. On the Fusebox portal, click User Setup.
The Add New User window opens and the User Information tab appears.
2. Complete the form, adding user information.
Note: Fields with an asterisk (*) are required.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 5
Field Characters Requirements
User Name (*) (alphanumeric)
You cannot edit the user name once saved.
Must be between 7 and 30 characters
May include the following characters:
• Period (.)
• Exclamation mark (!)
• Number sign (#)
• Dollar sign ($)
• Percent sign (%)
• Apostrophe (‘)
• Asterisk (*)
• Hyphen (-)
• Question mark (?)
• Caret (^)
• Underscore (_)
• Grave accent (')
• Left curly brace ({)
• Vertical bar (|)
• Right curly brace (})
• Tilde (~)
First Name Cannot exceed 30 characters
Last Name Cannot exceed 30 characters
Address Line 1 (*)
alphanumeric
Cannot exceed 100 characters
May include the following characters:
• Comma (,)
• Period (.)
• Apostrophe (‘)Hyphen (-)
• Underscore (_)
City (*) Cannot exceed 100 characters
Country (*) United States or Canada Text cannot be typed into the text box. State / Province (*) Appropriate choices for State/Province appear
in the drop-down selection box, after you select Country Code.
Postal Code (*) Cannot exceed 100 characters
United States
Postal Code (or Zip Code) is 5-digit number. Expanded ZIP code, Zip+4, is allowed by adding the dash before the extension digits.
Canada
Postal code is 6-digit number. Format is six alphanumeric characters in the ANA-NAN sequence where “A” represents an alphabetic character and “N” represents a number from 0 to 9, example, K1A-0B1.
Time Zone (*) Select from the drop-down list.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 6
Field Characters Requirements
Business E-mail (*) alphanumeric
Cannot exceed 50 characters
May include the following characters:
• Period (.)
• Exclamation mark (!)
• Number sign (#)
• Dollar sign ($)
• Percent sign (%)
• Apostrophe (‘)
• Asterisk (*)
• Hyphen (-)
• Question mark (?)
• Caret (^)
• Underscore (_)
• Grave accent (')
• Left curly brace ({)
• Vertical bar (|)
• Right curly brace (})
• Tilde (~)
Below business e-mail, message displays suggesting that each user have a unique e-mail address.
Shared e-mail address:
If user does not want others to have access to their e-mail (which contains user names and passwords), select the check box if user does not have an e-mail address. By selecting this option, the business e-mail is no longer a required field and you are able to continue to the next step in the setup process. When the last step of the setup process is complete, a window displays showing the user’s new credentials.
If check box if user does not have a unique e-
mail address is checked, the following applies:
Business e-mail appears without the asterisk symbol (*). Notification appears at the end of the setup process warning you that the new user’s credentials won’t be provided again. For more info, refer to Confirm and Save User in this document.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 7
Field Characters Requirements
Business Phone (*)Numeric
Must be between 10 and 20 characters
May include the following characters:
• Period (.)
• Dash (-)
• Opening parenthesis (
• Closing parenthesis )
• No hyphen is needed when inputting the phone number.
Business (Ext.) not required; numeric
Cannot exceed 10 characters
Business Fax – Numeric May include the following characters:
• Period (.)
• Dash (-)
• Opening parenthesis (
• Closing parenthesis )
• Must be between 10 and 20 characters
• No dash is needed when inputting the phone number.
3. Review the information for accuracy. You cannot edit the user name once the profile is created.
4. Click Next.
The Profiles and Entitlements | General tab appears.
If the user name is already in the system, you will receive an error message to select another user name.
5. Add a new user name to the User Name field.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 8
Assign Profiles and Entitlements
To set up a new user’s profiles and entitlements, perform the following steps:
Note: Make sure you are on the Profiles & Entitlements tab.
1. Select the entitlements for the new user on each tab.
Note: Each tab represents a different application in Fusebox.
In the following example, the applications available include General, Case Mgmt, Batch Mgmt, Reporting and File Based Activities.
To view the entitlements for each profile of the application (tab), click on the profile name. The entitlements associated with that profile appear under the entitlements section.
Note: You can hover over the profile name and the entitlements specific to that profile. You will also see information relevant to each tab you select as circled in red on the General tab.
2. Click on the tab of the application to which you want to add user profiles and entitlements.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 9
3. Click on the text of the profile name to view the entitlements associated with the profile.
The entitlements for the selected profile appear to the right.
4. Select the profile check box to assign to user.
For a list of available profiles and entitlements for each tab, refer to the Profile Options section of this document. Profiles include the following:
• General Profile Options
• General Profile Options - Grantor
• Case Mgmt Profile Options
• Case Mgmt Profile Options - Grantor
• Batch Mgmt Profile Options1
• Batch Mgmt Profile Options – Grantor
• Reporting Profile Options
• Batch Mgmt Ships Profile
• File-Based Activity Profile Options 1 Batch Management Profile Options include profile options for both Batch Management and Transaction Management.
Note: If you need to create other users that grant profiles, you must be assigned the Universal Grantor Profile.
5. Select the check box next to the profile you wish to assign from each application tab. You can assign more than one profile to a single user. Users always have more than one profile.
You must assign at least one of the following profiles to a user. These profiles appear in bold text on the user interface.
• Portal User No Home Page or Docs from Processor
• Portal User No Home Tab
• Portal User with Home Tab
If you have not chosen one of the three required profiles, you will receive the following message: “Please select a profile that includes reset own password.”
Each profile has specific entitlements. If the entitlements you select for a profile are not correct you will receive a screen message that explains the options for that entitlement. To remind you of the differences between the grant and non-grant profiles, the following message appears on each application tab:
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 10
“Grant Profiles give this user the ability to give this access to another user. To create a user that can give grant profiles, select the appropriate grant and the Universal Grant profile.”
6. Click Next.
The Hierarchies | Property Search tab appears.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 11
You must have at least one hierarchy node assigned to the user or you will receive an error message.
Note: Click Next to navigate through the tabs when adding a new user. Navigation cannot be accomplished by clicking User Information, Profiles & Entitlements, Hierarchies, Confirmation tabs.
If you will be setting up or maintaining merchant users, you must have the required accesses for each of the external grant profiles that you will need to assign. If you have not been assigned to an external grant profile, the profile will not appear as an option when administering other external user accounts.
Note: Some profiles are never assigned to a specific type of user. For example, BMUI users will never be given “Portal User – No Home Page” profile because it will cause problems in using the BMUI application.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 12
After you have completely setup the new user you a Confirmation window displays showing User Information, Profiles & Entitlements, and Hierarchies for the new user.
7. Click Save to save the new user information.
You will receive the following message.
8. Click OK.
Assign User Hierarchies
After each profile and entitlement is assigned to the new user, the next step is to add the hierarchy nodes to which you want the user to have access.
The selected hierarchy defines the level of customer data access and allows the user to view information in the system pertaining to the selected hierarchy level. The user can only see data pertaining to the hierarchy node they are assigned and the sites associated with that level.
Note: At least one hierarchy node must be assigned to add a new user.
To locate the hierarchy to assign to the user, look up the desired level in the merchant hierarchy by providing criteria for a search in the Property Search tab, or navigate to the hierarchy level using the Navigate Tree tab.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 13
Note: Property Search displays results in a grid format. Navigate Tree displays results in a tree format.
Hierarchy Search using Property Search
1. On the Hierarchies tab, select Property Search.
2. Select the user Hierarchy Name from the drop-down list or type the name in the free text field.
For merchants configured to see different views of their Property IDs, click the Hierarchy View list and select from the merchant-specific view options. The default setting is System, which shows the Fusebox standard system-assigned IDs. Other views are Alternate Client and System and can be used by some clients for unique identifiers.
Options include:
• Entity Name
• Entity ID
• Site ID
• Inn Code
• MCC Code
• City
• State
• Zip Code
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 14
• Store/Facility ID
3. Click Search.
The Hierarchies available appear in a grid format within the search results.
4. Select the check box next to the desired hierarchies.
5. Click Next.
The Confirmation tab displays.
6. To confirm and save, refer to Confirm and Save User in this document.
Hierarchy Search using Navigate Tree
To perform a hierarchy search using Navigate Tree, do the following:
1. Select the Navigate Tree tab to display results in a tree format.
2. From the Hierarchies tab, click the Navigate Tree tab.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 15
The Tree Search window appears.
3. Enter the Hierarchy Name.
The window expands to allow search criteria filters for Site ID and Entity ID.
4. Click Show in Tree.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 16
The Hierarchies meeting your request appear.
Note: A plus sign (+) next to the Hierarchy name indicates it can be expanded to show more hierarchies. Use the minus sign (-) to close the hierarchy tree. A node without a +/- sign denotes a site, representing a node at the lowest part of the tree. Records are sorted in ascending order to make it easier to find an individual record.
5. Select the check box next to the desired hierarchies.
6. Click Next.
The Confirmation tab displays.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 17
7. To confirm and save your choices, refer to Confirm and Save User in this document.
Confirm and Save User
After you have assigned profiles / entitlements, and hierarchies to the new user, perform the following steps:
1. From the Confirmation tab, review the User Information, Profiles & Entitlements and Hierarchies for accuracy.
2. If any information is incorrect, click Back to navigate to the window where a change is needed.
3. If all information is correct, click Save. The user is saved in the system.
4. A message appears that the user has been sent a password. Click OK.
The new user will receive two e-mails similar to the following.
The first e-mail gives the user the Fusebox site location and their user name.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 18
Dear Joe Smith:
You have been enrolled as a user for Fusebox, our robust payments gateway. Fusebox provides fast, convenient and secure access to help you manage your electronic payments activity. To access the Fusebox site, simply click on https://fusebox.elavon.net. You'll also want to add it to your favorites.
Your Username is JohnSmith3. For security reasons, your password will be sent in a separate e-mail.
If you are in need of product training please go to http://gatewaytraining.elavon.com.
Sincerely,
Elavon Gateway Registration Services
The second e-mail gives the user a temporary password for initial log on.
Dear Joe Smith:
You have been enrolled as a user for Fusebox, or the password you currently use to access Fusebox has been reset. Fusebox provides fast, convenient and secure access to help you manage your electronic payments activity. To access the Fusebox site, please go to https://fusebox.elavon.net . You'll also want to add it to your favorites.
Your Password is GB3nptXLp#hx You will be prompted to change your password upon initial login. If you are a new user, your Username will be sent in a separate e-mail for security reasons.
If you are in need of product training please go to http://gatewaytraining.elavon.com .
Sincerely,
Elavon
Gateway Registration Services
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 19
If the new user does not have an e-mail address, the user credentials appear in the message window.
Note: Once the window showing the user credentials is closed, the user name and password can no longer be viewed or retrieved. If the user forgets the password, the reset password process must begin again. For more information, refer to How to Reset a User Password in this document.
Follow your merchant procedures to notify the user of their user ID and temporary password. The Fusebox Administrator may verbally provide the user name and temporary password to the user.
5. Click Save.
The User has been saved message appears.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 20
Miscellaneous Hierarchy Information
User preferences can be changed to specify how you want the label on the hierarchies to appear. This section explains:
• Select the Hierarchy View
• Track Hierarchy Nodes
Select the Hierarchy View
1. Select the Hierarchy View from Welcome to Elavon Global Gateway.
By changing your user preferences, you can specify how you want the label on hierarchies to appear. The choices include:
• Hierarchy Type and Node Name
• Hierarchy Type and System ID
• Hierarchy Type and System ID and Node Name
2. To change how the labels of hierarchy choices appear, go to Welcome to Elavon Global Gateway | Manage Your Account | Preferences | User Setup | Hierarchy Node Label and change your User Setup preferences.
Track Hierarchy Nodes
You can use the Track Hierarchy Node button when you are assigning multiple hierarchies to a user and you want to keep track of which hierarchies you have assigned.
Chapter 2: Setting Up a New User FSB-0027-F
© Elavon, Incorporated 2015 21
The Hierarchy Nodes selected appear in the Selected Hierarchy Node window. This feature allows you to keep track of the hierarchies you are assigning as you select them.
1. In the Property Search view or the Navigate Tree view, select the hierarchies you want to assign to the user.
2. Click on Track Hierarchy Nodes.
The Hierarchy names appear in the Selected Hierarchy Nodes window in the format you have chosen in your account preferences.
3. To see the relationship of the selected hierarchy nodes, select the hierarchy name in the Selected Hierarchy Nodes window.
4. Click Find Hierarchy.
The Hierarchy page refreshes to show the relationship of the selected hierarchy. If the hierarchy is at the property level the item is highlighted in the list after the page is refreshed.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 22
Chapter 3: Editing User Information As a Fusebox administrator, you can edit information about an existing Fusebox user. You can make edits to the following:
• The user’s general account information
• The user’s assigned profiles
• The user’s assigned hierarchy nodes
Note: If you want to change a user name, you must remove it by deactivating the user and then set up the user with a new user name. You cannot change the user name.
Topics in this chapter include:
• How to Modify User Information
• How to Clone User
• How to Deactivate an Existing User
• How to Activate an Existing User
• How to Reset a User Password
• How to Update External User E-mail Address
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 23
How to Modify User Information
To search for and edit an existing user, do the following:
1. Click the User Setup tab.
The Add New User | User Information tab appears.
2. Click Search/Edit User.
The Search/Edit User page appears, showing the available search parameters.
3. Enter or select your search criteria. Search fields are not case sensitive.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 24
Search Options include:
• User Status – select either Active, Inactive, or Both
• User Name
• First Name
• Last Name
• Business Phone
• Business Fax
• Hierarchy Node (*)
Asterisk means required field
4. Select one of the following search procedures to select the hierarchy node:
Search at my hierarchy level and below (Gateway only)
5. In the Hierarchy Node drop-down list, select a hierarchy.
6. Click Search.
Search at specific nodes and below (Acquiring and Gateway)
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 25
7. Click Select Nodes.
The Hierarchy Search window appears.
8. Perform a search using Property Search or Navigate Tree.
If no records match your search criteria, a blank results page displays.
Note: Wildcard searches are supported. With wildcard queries use an asterisk (*) to represent characters. For example, to search for a last name that starts with a T, type T*. The result will list all users whose name begins with the letter T.
9. Click Search.
The list of results appears.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 26
A blank results page appears if there are no records that match your search criteria.
10. Select the row for the user from the list of results.
11. Depending upon what you need to edit, click on one of the buttons.
How to Clone User
When a new user is set up with the same profiles and entitlements as another user, the existing user can be cloned.
Complete the following steps to clone a new user from an existing user:
1. Go to the Search/Edit User tab.
2. Enter the search criteria for the user you wish to clone. Required fields are indicated by an asterisk (*).
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 27
3. Click Search.
The Results screen displays.
4. Highlight the row of the user you wish to clone.
5. Click Clone User.
Validating Clone User progress bar displays. The Search/Edit Clone User screen displays with information in some of the fields completed. The User Information, Hierarchies, and Confirmation tabs show as options.
6. Replace the information for the existing user with that of the new user, as necessary. The profile and entitlements for this new user will be set up based on the user being cloned.
7. Click Submit.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 28
Loading profiles and entitlements progress bar displays.
The Hierarchies screen displays.
Note: The user may change hierarchy (upon cloning) and the steps are exactly the same as creating a new user.
Confirmation page displays.
8. Click Save.
The Saving user progress bar displays.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 29
Popup window displays.
9. Click OK.
Popup window displays.
10. Click OK.
Note: You will be able to view the cloned user the next time you login by clicking Search/Edit User and conducting a search.
11. Click Clone another user to clone another user, or click OK to exit.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 30
How to Conduct a New Search
You can conduct a new search on the Search/Edit User tab or when you receive the results of your search. Click New Search in the Results screen.
To See a Quick View
You can see a quick view of a profile from the search Results tab.
1. Click Quick View in the Results screen.
The Profile Quick View window appears displaying User Information, Profiles, Hierarchies, and Preferences.
2. Click Esc or the Close button to close the window.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 31
To Do a Quick Edit
1. On the Search/Edit User tab, click Quick Edit to change the user’s general information.
2. Make updates.
3. Click Save. Submit User Profile.
The user’s information is updated in the system. The Search/Edit User page refreshes to show the “User has been saved” confirmation message.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 32
How to Edit User Profile
1. Click Edit User Profile to update the user’s contact information, profile selections, and merchant hierarchy access.
The page updates to display the selections already associated with the user.
2. Make the required updates on the User Information, Profiles & Entitlements or Hierarchies tabs.
3. To navigate to each tab, click Next.
Note: You cannot click the Profiles & Entitlements, Hierarchies or Confirmation tabs individually. You must navigate through the tabs by clicking Next until you reach your desired tab for edits.
4. When you are finished updating the user, continue to click Next until you have cycled through all tabs.
Note: Each previously assigned profile appears for the user in the Profiles & Entitlements tabs.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 33
In situations where the administrator does not have grantable entitlements for an existing user's profile, those profiles appear without a check box next to it, allowing the administrator to view the profile, but not to add or remove it.
The Confirmation tab appears, listing your selections.
5. Click Save.
The user’s information is updated in the system.
The Search/Edit User page refreshes to show the “User has been saved” confirmation message.
Note: Each previously assigned profile appears for the user in the Profiles & Entitlements tab.
In situations where the administrator does not have the grantable entitlements for the user’s profile, the profile still appears but there isn’t a check box next to the profile. This allows the administrator to view the profile (although they cannot change it).
The profile Grant Portal User No Home Page or Docs from Processor appears in the Profiles listing, but it cannot be assigned by this user. A check box is not available next to the profile name.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 34
How to Edit Account Status
The Results display on the Search/Edit User tab shows you the Account Status.
The columns for Active and Locked have a Y (Yes) or N (No) for Active and Locked user status in the Results table.
When an account is Inactive or Locked, the user will receive the message, Your account has been
locked for security reasons. Please call 1-866-265-6225 and one of our Customer Services
representatives will assist you with your login credentials, error displays.
To edit an account, go to the Search/Edit User tab and do the following:
1. Click on the User Information tab under Search/Edit User.
In the Account Status section, the profile information for Active Status and Locked Status are displayed. There are Unlocked and Locked buttons under Account Status.
2. Unlock the user by clicking on Unlock.
Note: You cannot lock a user through this function. If your account is in the Unlocked state, the Locked button is disabled.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 35
3. Click on Reset Password to reset the account password.
How to Deactivate an Existing User
Deactivating a user removes their ability to access Fusebox. Once deactivated, a user can no longer log in to the Fusebox portal. Each user has either an “Active” or “Inactive” user status. When searching for users in the system, you can search on both active and inactive users and they will appear in a list of results.
To search for and deactivate an existing user, perform the following steps.
1. Click User Setup tab.
The Add New User | User Information tab appears.
2. Click on the Search/Edit User tab.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 36
The Search/Edit User page appears, showing the available search parameters.
The User Status option buttons allow you to select an active user, an inactive user or both active/inactive users.
3. Enter or select your search criteria.
4. Click Search.
A list of results appears.
5. Select the row for the user from the list of results.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 37
6. Click Edit User Profile.
The Search/Edit User | User Information page appears auto-populated with the existing information for the user.
7. From the User Status area, select Inactive.
A confirmation window appears asking if you want to deactivate the user immediately.
8. In the Confirmation window, click Yes.
9. The Search/Edit User | User Information page refreshes to show the User Status as Inactive.
Administrators can still view and search for inactive users on the Search/Edit User page. Users who have been deactivated will show an N in the Active column of the Search/Edit User page. Active Status displays Y (yes, active) or N (no, inactive).
User has been saved confirmation message appears.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 38
How to Activate an Existing User
Administrators can edit a user’s profile to update the user status to “Inactive.” Administrators can also reactivate a user that has been deactivated, by searching for the inactive user account and updating the user’s status to “Active.”
To search for and activate an existing user, perform the following steps.
1. Click User Setup.
The Add New User | User Information tab appears.
2. Click Search/Edit User.
The Search/Edit User page appears, showing the available search parameters.
The User Status option allows you to select an active user, an inactive user or both active/inactive users.
3. Enter or select your search criteria.
4. Click Search.
A list of results appears.
Select the row for the user from the list of results.
5. Click Edit User Profile.
The Search | Edit User | User Information page appears auto-populated with the existing information for the user.
6. From the User Status area, select Active.
A confirmation window appears asking if you want to activate the user immediately.
7. In the Confirmation window, click Yes.
The Search/Edit User | User Information page refreshes to show the User Status as Active.
Users who have been activated will show a Y in the Active column of the Search/Edit User page.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 39
8. Click Next to proceed to the Profiles & Entitlements page.
9. Click Next to proceed to the Hierarchies page.
10. Click Next to proceed to the Confirmation page.
11. Click Save.
The User has been saved and a confirmation message appears.
How to Reset a User Password
If a user is denied access to Fusebox, an administrator may have to reset the password. Reasons why a user may not have access include:
Users have the ability to reset their own passwords by correctly answering a security question.
Users will not be able to log on to Fusebox if:
• There have been five failed login attempts (consecutive or not)
• Failure to correctly answer the security questions when changing their password
• User has not logged into Fusebox for over 90 days
• Deactivated by a Fusebox Administrator
• If the password has expired
Note: User passwords can also be changed by the user themselves by going to Manage Your Account | Change Password.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 40
Password Resets
You will receive the following password reset message:
To reset a user’s password, perform the following steps.
1. Click User Setup tab.
2. Click Search/Edit User.
The Search/Edit User tab appears.
3. In the User Status option area, select Active, Inactive or Both.
4. Enter or select your search criteria.
5. Click Search.
A list of results appears.
6. Select the row for the user from the list of results.
7. Click Edit User Profile.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 41
The Search/Edit User | User Information page appears auto-populated with the existing information for the user.
8. From the User Status area, select Change User’s Password.
A confirmation window appears asking if you want to proceed with changing the password for the user.
9. Click Proceed.
A message window appears which contains the user’s User Name and temporary password.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 42
Users with a valid e-mail account receive a notification e-mail message similar to the following example.
Dear John Smith:
This notice is to confirm your recent password reset.
Your Password is PsHMX9-jqGfx
You will be prompted to change your password upon initial login.
If you have any questions regarding this e-mail, please contact a gateway services
representative at 877-421-6249.
Sincerely,
Elavon
Gateway Registration Services
For users without a valid e-mail address, the Fusebox administrator must verbally provide the temporary password to the user. The next time the user logs in to the Fusebox portal using the temporary password verbally provided by the Fusebox administrator, they are prompted to change their password.
10. Click OK.
The confirmation pop-up appears.
How to Update External User Email Address
1. Go to the Manage Your Account menu option located in upper right of Home page.
Chapter 3: Editing User Information FSB-0027-F
© Elavon, Incorporated 2015 43
2. Select Update Email Address from drop-down.
Update Email Address popup displays.
3. Enter your new Email in the New Email field.
4. Re-enter your password in the Please re-enter your password field.
5. Click Submit.
Please wait progress bar displays.
Email Address Changed Successfully popup displays.
6. Click Continue to proceed with your work.
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 44
Chapter 4: Profile and Entitlement Options
This chapter illustrates the profiles available in each application or tab within Fusebox. With each profile, the entitlements associated with that profile are listed so you can choose the appropriate access to a user. The tables below identify the profiles available on each tab and the entitlements you can choose to set up a user.
• General Tab Profile Options
• Case Management Profile Options
• Batch and Transaction Management Profile Options
• Batch Management Grantor Profile Options
• BMUI Ships Profile Options
• Reporting Profile Options
• File-based Activities Profile Options
Note: Users that need to create other users with grant profiles will need the Universal Grantor profile.
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 45
General Tab Profile Options
The following profiles and entitlements are accessible from the General tab in User Setup.
General Tab Ac
tivat
e ex
tern
al u
ser
Add
exte
rnal
use
r
Deac
tivat
e ex
tern
al u
ser
Lock
/Unl
ock
exte
rnal
use
r
Mod
ify e
xter
nal u
ser
Qui
ck E
dit E
xter
nal
Qui
ck V
iew
Ext
erna
l
Rese
t oth
er u
sers
pas
swor
d
User
-set
up u
ser
Rese
t ow
n us
er p
assw
ord
Upda
te o
wn
user
pre
fere
nces
info
rmat
ion
View
Hom
e Pa
ge
View
Mes
sage
s
Hide
Doc
umen
ts fr
om P
roce
ssor
Toke
n Co
nver
sion
Brow
ser
Clea
r Car
d Ac
cess
Portal User No Home Page or Docs from Processor
Portal User No Home Tab
Portal User with Home Tab
Clear Card Access External Administrator Token Conversion Browser User Mgmt. – External Read Only
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 46
General Tab Profile Grantor Options - Grant
General Tab Grantor Gr
ant A
ctiv
ate
exte
rnal
use
r
Gran
t Add
ext
erna
l use
r
Gran
t Dea
ctiv
ate
exte
rnal
use
r
Gran
t Loc
k/Un
lock
ext
erna
l use
r
Gran
t Mod
ify e
xter
nal u
ser
Gran
t Res
et o
ther
s use
r pas
swor
d
Gran
t Edi
t Vie
w E
xter
nal
Gran
t Qui
ck V
iew
Ext
erna
l
Gran
t Use
r Set
up E
xter
nal
Gran
t Res
et o
wn
user
pas
swor
d
Gran
t Upd
ate
own
user
pre
fere
nces
inf
orm
atio
n
Gran
t Vie
w H
ome
Page
Gran
t Vie
w M
essa
ges
Gran
t Tok
en C
onve
rsio
n Br
owse
r
Gran
t Cle
ar C
ard
Acce
ss
Gran
t Q
uick
Edi
t Ext
erna
l
Gran
t Use
r-se
tup
user
Gran
t Hid
e Do
cum
ents
from
Pro
cess
or
Gran
t Tok
en C
onve
rsio
n Br
owse
r
Gran
t Use
r-se
tup
user
Grant Clear Card Access Grant External Administrator Grant Portal User No Home Tab Grant Portal User No Home Page or Docs from Processor
Grant Portal User with Home Tab Grant Token Conversion Browser Grant User Mgmt. – External Read Only
Universal Grantor *
Note: * Universal Grantor Profile – if you need to create other users with grant profiles, you must have the Universal Grantor Profile.
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 47
Case Management Profile Options
The following profiles and entitlements are accessible from the Case Management tab in User Setup.
Case Management Profile Options - Access
Case Management As
sign
Case
s to
Exte
rnal
Par
tner
Use
r
Assis
ted
Resp
onse
Man
agem
ent
Case
Act
ions
- Ac
cept
Case
Act
ions
- Ad
d N
otes
Case
Act
ions
- As
sign
Case
Act
ions
- Ch
ange
Sta
tus
Case
Act
ions
- M
ark
As D
uplic
ate
Case
Act
ions
- Re
spon
d
Case
Act
ions
- St
atus
chan
ge
Exte
rnal
or T
hird
Par
ty U
ser
Folio
imag
e se
arch
& a
cces
s
Man
ual I
mag
e M
atch
ing
Not
ifica
tion
OCM
Use
r
Que
ue M
anag
emen
t
Reas
sign
Case
s
Repo
rtin
g M
odul
e - A
udit
& P
rodu
ctiv
ity
Repo
rtin
g M
odul
e - C
ase
Anal
ysis
Repo
rtin
g M
odul
e - C
harg
ebac
k
Repo
rtin
g M
odul
e - R
etrie
val
View
Res
pons
e Te
mpl
ate
Man
agem
ent
View
Ass
isted
Res
pons
e M
anag
emen
t
View
Cas
e De
tails
View
Cas
e Im
ages
from
Pro
cess
or
View
Que
ue M
anag
emen
t
View
Res
pons
e Te
mpl
ate
Man
agem
ent
Basic (Disputes Only)
Case Management - General
Case Management - Manager
External Partner or Third Party
Grant Management Grantor Profile Options - Grant
Case Management Grantor
Gran
t Ass
ign
Case
s to
Exte
rnal
Par
ty U
ser
Gran
t Ass
isted
Res
pons
e M
anag
emen
t
Gran
t Cas
e Ac
tions
– A
ccep
t
Gran
t Cas
e Ac
tions
– A
dd N
otes
Gran
t Cas
e Ac
tions
- As
sign
Gran
t Cas
e Ac
tions
– C
hang
e St
atus
Gran
t Cas
e Ac
tions
– M
ark
As D
uplic
ate
Gran
t Cas
e Ac
tions
- Re
spon
d
Gran
t Cas
e Ac
tions
– S
tatu
s Cha
nge
Gran
t Ext
erna
l or T
hird
Par
ty U
ser
Gran
t Fol
io im
age
sear
ch a
nd a
cces
s
Gran
t Man
ual I
mag
e M
atch
ing
Gran
t Not
ifica
tion
Gran
t OCM
Use
r
Gran
t Que
ue M
anag
emen
t
Gran
t Rea
ssig
n Ca
ses
Gran
t Rep
ortin
g M
odul
e - A
udit
& P
rodu
ctiv
ity
Gran
t Rep
ortin
g M
odul
e - C
ase
Anal
ysis
Gran
t Rep
ortin
g M
odul
e - C
harg
ebac
k
Gran
t Rep
ortin
g M
odul
e - R
etrie
val
Gran
t Vie
w A
ssist
ed R
espo
nse
Man
agem
ent
Gran
t Res
pons
e Te
mpl
ate
Man
agem
ent
Gran
t Vie
w C
ase
Deta
ils
Gran
t Vie
w C
ase
Imag
es fr
om P
roce
ssor
Gran
t Vie
w Q
ueue
Man
agem
ent
Gran
t Vie
w R
espo
nse
Tem
plat
e M
anag
emen
t
Grant Basic (Disputes Only)
Grant Case Management - General
Grant Case Management - Manager
Grant External Partner or Third Party
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 48
Batch and Transaction Management Profile Options
The following profiles and entitlements are accessible from the Batch Management tab in User Setup.
Note: Both Batch Management and Transaction Management users are set up on the Batch Management tab in the User Setup application.
Batch Management
Add
Tran
sact
ion
Not
es
Assig
n/M
ove
tran
sact
ions
with
in U
ser D
efin
ed
Batc
hes
Batc
h M
anag
emen
t Use
r
Batc
h m
gmt -
Add
Bat
ch N
otes
Batc
h m
gmt -
Cre
ate
a Ba
tch
Batc
h m
gmt.
- Rec
eive
ale
rts
Batc
h m
gmt.
- Vie
w B
atch
Not
es
Crea
te a
Ret
urn
Crat
e An
y N
ew T
rans
actio
n
Crea
te a
Pen
ding
Bat
ch
Dele
te a
Bat
ch
Edit
Tran
sact
ion
Sear
ch B
atch
/ V
iew
Res
ults
Sear
ch T
rans
actio
n / V
iew
Res
ults
Sett
le a
Bat
ch
Tran
sact
ion
mgm
t. - C
reat
e a
Batc
h
Tran
s mgm
t. - R
ecei
ve a
lert
s
Tran
sact
ion
Man
agem
ent U
ser
Tran
sact
ion
expo
rt
View
Tra
nsac
tion
/ Life
cyc
le D
etai
l
View
Tra
nsac
tion
Not
es
Void
Tra
nsac
tion
External User Admin
External User Deposit – Checker
External User Deposit – Maker
External User - Full Deposit External User - Full Deposit + Admin External User Research & Correction External User View Only
External User View and Add Notes
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 49
Batch Management Grantor Profile Options
The following profiles and entitlements are accessible from the Batch Management tab in User Setup.
Batch Management – Grantor Gr
ant A
dd T
rans
actio
n N
otes
Gran
t Ass
ign/
Mov
e tr
ansa
ctio
ns w
ithin
Use
r Def
ined
Bat
ches
Gran
t Bat
ch M
anag
emen
t Use
r
Gran
t Bat
ch m
gmt.
- Add
Bat
ch N
otes
Gran
t Bat
ch m
gmt.
- Cre
ate
a Ba
tch
Gran
t Bat
ch m
gmt -
Rec
eive
ale
rts
Gran
t Bat
ch m
gmt -
Vie
w B
atch
Not
es
Gran
t Cre
ate
a Re
turn
Gran
t Cre
ate
Any
New
Tra
nsac
tion
Gran
t Cre
ate
a Pe
ndin
g Ba
tch
Gran
t Del
ete
a Ba
tch
Gran
t Edi
t Tra
nsac
tion
Gran
t Sea
rch
Batc
h /
View
Res
ults
Gran
t Sea
rch
Tran
sact
ion
/ Vie
w R
esul
ts
Gran
t Set
tle a
Bat
ch
Gran
t Tra
nsac
tion
mgm
t - C
reat
e a
Batc
h
Gran
t Tra
nsac
tion
mgm
t - R
ecei
ve a
lert
s
Gran
t Tra
nsac
tion
Man
agem
ent U
ser
Gran
t Tra
nsac
tion
expo
rt
Gran
t Vie
w T
rans
actio
n / L
ife C
ycle
Det
ail
Gran
t Vie
w T
rans
actio
n N
otes
Gran
t Voi
d Tr
ansa
ctio
n
Grant External User Admin
Grant External User Deposit - Checker
Grant External User Deposit - Maker
Grant External User - Full Deposit Grant External User - Full Deposit + Admin
Grant External User Research & Correction
Grant External User - View Only
Grant External User View and Add Notes
BMUI Ships Profile Options
BMUI Ships G
rant
AD
MIN
- Cr
eate
Voy
age
Gra
nt A
DM
IN -
Edit
Voya
ge
Gra
nt A
DM
IN -
Sear
ch V
oyag
e
Gra
nt A
ctiv
ity M
onito
r
Gra
nt E
dit R
efer
ral I
nfor
mat
ion
Gra
nt E
nter
refe
rral
info
rmat
ion
Gra
nt S
HIP
USE
R
ADM
IN -
Crea
te V
oyag
e
ADM
IN -
Edit
Voya
ge
ADM
IN -
Sear
ch V
oyag
e
Activ
ity M
onito
r
Edit
Refe
rral
Info
rmat
ion
Ent
er re
ferr
al in
form
atio
n
Gra
nt S
HIP
USE
R
Grant Ships External User
Ships External User
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 50
Reporting Profile Options
The following profiles and entitlements are accessible from the Reporting tab in User Setup.
Reporting W
ebFo
cus U
ser
Acco
untin
g an
d Re
con
Repo
rts
Adm
inist
rato
r Rep
orts
Crui
se Li
ne C
usto
m R
epor
ts
Exte
rnal
Use
r/Au
dit R
epor
t
Gran
t Acc
ount
ing
@&
Rec
on R
epor
ts
Gran
t Adm
inist
rato
r Rep
orts
Gran
t Cru
ise Li
ne C
usto
m R
epor
ts
Gran
t Ext
erna
l Use
r/Au
dit R
epor
ts
Gran
t Man
agem
ent V
iew
Rep
orts
Gran
t Res
earc
h &
Sup
port
Rep
orts
Gran
t SFT
P Sc
hedu
ling
Acce
ss
Gran
t Set
tle &
Bat
ch M
gmt R
epor
ts
Man
agem
ent V
iew
Rep
orts
Rese
arch
& S
uppo
rt R
epor
ts
SFTP
Sch
edul
ing
Acce
ss
Sett
le a
nd B
atch
Mgm
t Rep
orts
Gran
t Saf
e T
Suite
Accounting & Recon Administrator
Cruise Line Custom
External User / Audit
Grant Accounting & Recon
Grant Administrator Grant Cruise Line Custom Grant Management View Grant Research & Support
Grant SFTP Access
Grant Safe T Suite Grant Settle & Batch Mgmt
Management View
Research & Support SFTP Access Safe T Suite
Settle & Batch Mgmt
Chapter 4: Profile and Entitlement Options FSB-0027-F
© Elavon, Incorporated 2015 51
File-based Activities Profile Options
The following profiles and entitlements are accessible from the File Based Activities in the User Setup application.
File Based Activities U
ploa
d Fi
les
Addi
ng N
otes
to a
File
Dow
nloa
d Fi
les
File
Man
agem
ent U
ser
Gra
nt U
ploa
d Fi
les
Gra
nt A
ddin
g N
otes
to a
File
Gra
nt D
ownl
oad
File
s
Gra
nt F
ile M
anag
emen
t Use
r
File Management External User Grant File Management External User