9250

3021

012R

EVA

FUZZ FACE DISTORTION

DIRECTIONS• Run a cable from your guitar to

the JHM5’s INPUT jack and run another cable from the JHM5’s OUTPUT jack to your amplifier.

• Start with VOLUME and FUZZ controls at 12 o’clock.

• Turn the effect on by depressing the footswitch.

• Rotate VOLUME knob clockwise to increase overall volume or counterclockwise to decrease it.

• Rotate FUZZ knob clockwise to increase the amount of fuzz or counterclockwise to decrease it.

DUNLOP MANUFACTURING, INC. P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: 1-707-745-2722 FAX: 1-707-745-2658

SPECIFICATIONS

Input Impedance 10kΩ

Output Impedance

Max Volume 2kΩ

Mid Volume 50kΩ

Max Output -6dBV

Max Gain 45dB

Current Draw 3.4mA

Power Requirement 9 volts DC*Drive stage adjusted maximum CW **With all controls at mid position

POWERThe Jimi Hendrix™ Fuzz Face Distortion can be powered by one 9-volt battery (remove bottom plate to install), an adapter such as the ECB003, or the MXR DC Brick™ and Iso-Brick™ power supplies.

FUZZ FACE DISTORTION

The Fuzz Face Distortion was a crucial element to the Jimi Hendrix™ sound throughout his career. This pedal’s circuit is meticulously faithful to the very same unit he employed in the late ’60s, featuring colorful, iconic Hendrix art from legendary rock artist Gered Mankowitz.