Page 1
3” Hygienic Butterfly Valve
3” Concentric Disc Butterfly Valve
Optional extras
- inlet/outletconnections available include 3”BSP, 3”RJT, 3”Camlock,flanged and weld prepared. Single hand operation withTIR facility. Contact parts manufactured in 316 stainlesssteel fitted with silicon seal (FDAapproved).
- Other seal materials available onrequest. Other connections available on request.
BUTT002 REV00-22.04.99
* Part numbers dependant upon valve specification.
Item Description Part No.
1 M10 lock nut 5112-002
2 Handle assembly 358/2010
3 Top flange 358/1605
4 Spring washer (4) 5113-003
5 M8 nut (4) 5112-001
6/6a Body half See note*
7 Main seal 5005-58*
8 Lower bearing support 358/3024
9 M8 hex screw (4) 5111-038
10 Vane 358/3020
11 Guide bush 358/3023
Data
TM
Parts drawing
Inlet Outlet Part No.
3” RJT 3” RJT 358/1600
3” RJT 3” BSP 358/1700
3” BSTD 3” RJT 358/1100
3” BSTD 3” BSP 358/0000
TW 80 3” BSP 358/120S
DIN 80 3” Camlock 358/3950#
Range
Description Part No.
3” BSP blank cap 10303PS
3” RJT blank cap 358/0675
3” Camlock cap 90/DC300
Associated Parts
Weight 6 Kg (*see note)Design Pressure (MAWP) 4 Bar (58 PSI)Test Pressure 6 Bar (87 PSI)Design Temperature 150°C (302°F)
* Valve weight, dimensions and body assemblypart number will vary according to inlet/outletSpecification.
N.B.
Fitting Details
Example shown : 358/1600
Specification
© Fort Vale Engineering Ltd. 2006
7
1
42
6
6a
8
9
10
11 5
3
Ø 136.7 (5.38")
107.2
(4.2
2")
316 ST ST
FORT VALE
164.1 (6.46")
90.4 (3.56")
Ø78.0
(2.8
7”)
45.2 (1.78”)
Page 2
Page 3
Page 4
Page 5
Parts drawing
Data3” Clamped PneumaticWiddop Butterfly Valve
TM
BUTT028 REV00-22.07.03
SEAL KITPart number contains all parts marked368/00SKA
Item Description Part No.
1 Spring return actuator 5127-115
2 Drive adaptor assembly 368/2824
3 Bridge assembly 368/2820
4 M8 flat section spring washer (6) 5113-003
5 M8 x 20mm hex head bolt (4) 5111-046
6 Stuffing clamp bush 368/0301
7 PTFE O ring (2) 20363
8 Viton O ring 20361
9 Spindle 368/0200
10 PTFE spindle seat 368/0009
11 Closure plate 368/0400
12 Main seal 368/0002
13 Nitrile O ring 5005-342
14 Seal clamp plate 368/0045
15 Bottom bush 368/0035
16 Bottom spindle 368/0036
17 Body 368/0150
18 M8 full nut (2) 5112-001
19 M8 plain washer (2) 5113-005
20 M8 x 25mm socket capscrew (2) 5111-148
A detailed step-by-step repair manual is available for our range of discharge butterfly valves. Please contact ourSales team for further information.
© Fort Vale Engineering Ltd. 2006
2
3
4
5
6
7
8
9
7
10
11
12
13
14
15
16
17
18
4
19
20
1
Page 6
Page 7
Parts drawing
Data3” Flanged Widdop
Butterfly ValveTM
BUTT015 REV01-06.01.03
REPAIR KITPart number contains all parts marked368/316RKA
SEAL KITPart number contains all parts marked368/00SKA
SELF ADHESIVE DECAL - PART NO. 368/0300Text in English, German and French
A detailed step-by-step repair manual is available for our range of discharge butterfly valves. Please contact ourSales team for further information.
Item Description Part No.
1 Countersunk setscrew 5111-030
2 Washer 20370
3 Split ring 368/0011
4 Operating lever 368/9837
5 Handle 368/0050
6 Handle location spring 368/0012
7 Handle location pin 368/0010
8 Sockethead capscrew (2) 5111-010
9 Plain washer (2) 5113-005
10 Stuffing clamp 368/0040
11 PTFE stuffing clamp bush 368/0301
12 PTFE O ring (2) 20363
13 Viton O ring 20361
14 Spindle 368/0200
15 PTFE spindle seat 368/0009
16 Body 368/9141
17 Full nut (2) 5112-001
18 Bottom spindle 368/0036
19 PTFE bottom bush 368/0035
20 Closure plate 368/0400
21 PTFE main seal 368/0002
22 Nitrile O ring 5005-342
23 Seal clamp plate 368/9148
© Fort Vale Engineering Ltd. 2006
1
2
3
4
5
6
7
8
9
10
11
12
13
14
12
15
16
17
18 19 2021
2223
Page 8
Page 9
Data
TM
Parts drawing
Item Description Part No.
1 M6 socket head set screw 5111-030
2 Washer 20370
3 Handle assembly 368/0075
4 Electrical continuity spring 368/0014
5 M8 socket head cap screw (2) 5111-148
6 M8 plain washer (2) 5113-005
7 Stuffing plate 368/0040
8 Stuffing clamp bush 368/0301
9 PTFE O Ring 20363
10 Viton O ring 20361
11 Spindle 368/0200
12 Perfluoroelastomer O Ring 5005-586
13 PTFE spindle seat 368/0009
14 M12 full nut (4) 5112-006
15 M12 spring washer (4) 5113-010
16 M12 hex head set screw (4) 5111-023
Item Description Part No.
17 Inlet adaptor *see note 368/9410
18 CNAF/PTFE inlet gasket 5005-707
19 Nitrile O ring 5005-342
20 Seal clamp 368/9148
21 PTFE main seal 368/0002
22 Closure plate 368/0400
23 3/8 Taper plug *see note 5128-0XX
24 Bottom spindle 368/0036
25 Bottom spindle bush 368/0035
26 M10 socket head cap screw (4) 5111-053
27 M10 spring washer (4) 5113-002
28 3” BSP outlet *see note 368/9430
29 PTFE outlet seal 5005-706
30 Body (non-vented) *see note 368/9420A
31 M8 full nut (2) 5112-001
32 M8 spring washer (2) 5113-003
33 Key 368/4625
NB Part number varies according to specification
BUTT007 REV02-15.11.05
SEAL KIT part number 368/94SK contains all partsmarked
3” Tank-Pro RoadTanker Butterfly Valve
© Fort Vale Engineering Ltd. 2006
3
4
5
6
7
8
9
10
14
15
16
17
18
1920
21
22
2324
25
26
27
28
2930
3132
33
11
13
12
1
2
Page 10
Page 11
Page 12
Page 13
Page 14
Associated Parts
Fitting Details
Assembly Details
Specification Range
BUTT016 REV03-19.10.04
Data
TM
4” Clamped WiddopButterfly Valve
4” Clamped Butterfly Valve
Options
- left hand operated with TIR tohandle and padlock facility. Contact parts manufacturedin 316 stainless steel with PTFE main seal.
- lockable handle. “Congealing cargo” versionwith semi-spherical closure plate. Range of 2” and 3”clamped valves.
Weight 4 KgDesign Pressure (MAWP) 6 Bar (87 PSI)Test Pressure 10 Bar (145 PSI)Design Temperature Range -20°C to 200°C
(-4°F to 392°F)
M16 bolts torque setting 80 NM (60 LBF FT)
Design approval by Lloyds Register of Shipping.
Part No. Description
468/7000B Left hand standard butterfly valve
468/7500B Left hand with semi-spherical closure plate
Associated Parts Part No.
CNAF/PTFE inlet gasket 5005-468
CNAF/PTFE outlet gasket 5005-469
Bolting kit (8 x bolts, nuts, washers) 468/1100
4” BSP outlet flange 468/8047
4” BSP blank cap with PTFE washer 10304PSC
4” NPT outlet flange 468/8049
4” NPT blank cap with PTFE washer 425/4000
Example Assembly IMPORTANT NOTE
CLOSED
BUTTERFLY VALVE MUST BE ASSEMBLED TO THEFOOTVALVE/TANK OUTLET PIPEWORK WHILST INTHE POSITION.
© Fort Vale Engineering Ltd. 2006
201.7 (7.94”)
173.9
(6.8
5”)
Ø101.6
(4.0
0”)
Ø114.3
(4.5
0”)
Ø136.1 (5.36”)
Ø152.4 (6.00”)STD SERRATIONS
Ø163.1 (6.42”)
47.3
(1.8
6”)
INLET
5005-468 468/7000B 5005-469 468/8047 10304PSC
468/1100Page 15
Data4” Clamped Widdop
Butterfly ValveTM
Parts drawing
BUTT017 REV01-18.11.03
SELF ADHESIVE DECAL - PART NO. 326/0300Text in English, German and French
A detailed step-by-step repair manual is now available for our range of discharge butterfly valves. Please contactour Sales team for further information.
Item Description Part No.
1 Split ring 368/0011
2 Sockethead setscrew 5111-030
3 Washer 20370
4 Operating lever 368/9837
5 Handle 368/0050
6 Handle location spring 368/0012
7 Handle location pin 368/0010
8 Sockethead capscrew (2) 5111-148
9 Plain washer (2) 5113-005
10 Stuffing clamp 368/0040
11 PTFE stuffing clamp bush 368/0301
12 PTFE O ring (2) 20363
13 Viton O ring 20361
14 Spindle 368/0200
15 PTFE spindle seat 368/0009
16 Closure plate 468/0400
17 Lower spindle 368/0036
18 PTFE lower spindle bush 368/0035
19 Spring washer (2) 5113-003
20 Full nut (2) 5112-001
21 Body 468/0150
22 PTFE main seal 468/0002
23 Nitrile O ring 5005-357
24 Seal clamp plate 468/5505
SEAL KITPart number contains all parts marked468/00SKB
© Fort Vale Engineering Ltd. 2006
1
2
3
4
5
6
7
8
9
10
11
12
13
14
12
15
16
17
18
1920
21
22
23
24
Page 16
DET SOM ÄR SPECIAL FÖR ANDRA,ÄR STANDARD FÖR OSS.
Åskvädersgatan 1, 418 34 Göteborg | Tel. 031-53 03 25 | Fax. 031-54 36 65 | [email protected] | www.slangflex.se