FWPQ2616 Flat Wire SMD Power Inductor
Features
Electrical
Tolerance: 10%
Test Frequency: 100KHz, 0.1V
Operating Temp: -40ºC ~ +85 ºC
Irms: Current at which the temperature rise willnot exceed 40 ºC above ambient.
Physical
RoHS
ALLIED COMPONENTS INTERNATIONAL949-356-1780 www.alliedcomponents.com
30.0
30.0
28.0
28.0
28.0
28.0
28.0
Irms (A)
FWPQ2616-1R5K-RC
FWPQ2616-2R2K-RC
FWPQ2616-6R8K-RC
FWPQ2616-100K-RC
FWPQ2616-150K-RC
FWPQ2616-220K-RC
FWPQ2616-330K-RC
AlliedPart
Number
INDUCTANCE+/- 10%
10% 30%
DROP
DCRMax.
1.5
2.2
6.8
10
15
22
33
>100
>100
45.0
31.2
21.2
14.0
8.7
100
100
42.0
28.0
18.0
12.0
7.0
>100
>100
45.9
32.1
21.9
15.0
9.6
1.62
1.85
2.85
2.85
2.85
2.85
2.85
20%DROP
28.0
28.0
FWPQ2616-3R3K-RC
FWPQ2616-4R7K-RC
3.3
4.7
92.5
61.2
91.0
59.0
93.6
62.4
2.80
2.85
DROP• Flat Wire SMD Power Choke
• Ultra Low DCR
• High Saturation Current up to 100A
Inductance Range: 1.5uH ~ 33uH
Packaging: 40 per Tray, 280pcs per Carton
Marking: Part number
REVISED 10/08/2015
Max.
• Frequency Range up to 1MHz
Isat: Current at which the inductance will dropby no more than the specified amount from its original Inductance without current.
Isat (A)
(uH)
All specifications subject to change without notice.
(mΩ)