G H Raisoni College of Engineering Department of Mechanical Engineering July 2017 Volume: 02 Dr. P. V. Walke Head of Department Mr. Skumar S. Kumbhalkar Mr. Aman Agrahari In-charge Dept. News Letter Editor Mr. Sajid Sayyad Student Member, Dept. News Letter Our Vision To be recognized internationally for quality education and research in mechanical engineering with excellence in the fields of design, manufacturing and thermal sciences Our Mission • To impart quality and value based education to raise satisfaction level of all stake holders. • To promote research and development activities in the field of mechanical engineering and allied areas. • To create competent mechanical engineering professionals who are trained in the fields of design, manufacturing and thermal sciences
Transcript
G H Raisoni College of Engineering
Department of Mechanical Engineering
July 2017 Volume: 02
Dr. P. V. Walke
Head of Department
Mr. Skumar S. Kumbhalkar Mr. Aman Agrahari
In-charge Dept. News Letter Editor
Mr. Sajid Sayyad
Student Member, Dept. News Letter
Our Vision
To be recognized internationally for quality education and research in mechanical engineering with
excellence in the fields of design, manufacturing and thermal sciences
Our Mission
• To impart quality and value based education to raise satisfaction level of all stake holders.
• To promote research and development activities in the field of mechanical engineering and
allied areas.
• To create competent mechanical engineering professionals who are trained in the fields of
design, manufacturing and thermal sciences
Programme Educational Objectives of Department (PEOs)
The educational objectives of the Mechanical Engineering programme are designed to produce competent
engineers who are ready to contribute effectively to the advancement of Mechanical Engineering causes
and to accommodate the needs of the profession. The Mechanical Engineering Department is dedicated to
graduating mechanical engineers who:
1. Shall practice Mechanical Engineering in the general disciplines of design, thermal and manufacturing
engineering in industry and establishments in government and private sectors.
2. Shall apply fundamental technical knowledge and skills to find workable solutions to technological
challenges and problems in various areas of Mechanical Engineering.
3. Shall pursue advanced education, research and development, and other creative efforts in science
and technology.
4. Shall conduct themselves in a responsible, professional and ethical manner for the benefit of the
industry and society.
Program Outcomes Engineering Graduates will be able to:
1. Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering
specialization to the solution of complex engineering problems.
2. Identify, formulate, review research literature, and analyze complex engineering problems reaching
substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
3. Design solutions for complex engineering problems and design system components or processes that
meet the specified needs with appropriate consideration for the public health and safety, and the cultural,
societal, and environmental considerations.
4. Use research-based knowledge and research
methods including design of experiments, analysis and interpretation of data, and synthesis of the
information to provide valid conclusions.
5. Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools
including prediction and modeling to complex engineering activities with an understanding of the
limitations.
6. Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and
cultural issues and the consequent responsibilities relevant to the professional engineering practice.
7. Understand the impact of the professional engineering solutions in societal and environmental contexts,
and demonstrate the knowledge of, and need for sustainable development.
8. Apply ethical principles and commit to professional ethics and responsibilities and norms of the
engineering practice.
9. Function effectively as an individual, and as a member or leader in diverse teams, and in
multidisciplinary settings.
10. Communicate effectively on complex engineering activities with the engineering community and with
society at large, such as, being able to comprehend and write effective reports and design documentation,
make effective presentations, and give and receive clear instructions.
11. Demonstrate knowledge and understanding of the engineering and management principles and apply
these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary
environments.
12. Recognize the need for, and have the preparation and ability to engage in independent and life-long
learning in the broadest context of technological change.
Programme Specific outcomes Outcomes (PSOs) for UG Programme
Engineering Graduates shall
1. Demonstrate industrial practices learned through internship and solve the industrial problem using
technical knowhow acquired.
2. Apply skill in multi disciplinary area of renewable energy, automotive, agricultural & heat transfer
3. Utilize skill in developing innovative prototype concepts enabling to protect intellectual property
rights
Dear Students,
This is a very pleasure for me to interact with you all through this monthly news portal. This is a
platform where anyone can express him or herself freely and can share their ideas with others. Be
with this consistently and try to contribute always. This must lead you to be thought provoking and
mindfulness. So must try to explore you. I am wishing you well for that.
Regarding academics, I really appreciate your efforts for the studies. As one month has passed after
commencement of the new session, now we have to strictly focus on our activities and study as
well. Like past years, this year also we have to keep the same spirit of organization of events and
various activities. New forum members and their duty regarding particular field is the most desired
parameter. We have to organize both technical and non-technical events throughout the year. For
that well planned schedule, your cooperation and coordination in work is the first requirements, then
and then we will be successful to keep the consistency in our achievement and first position of our
department. All the faculties and department personnel are with you to help and guide you for
various activities and all that. So maintain the continuity in the work and activities.
Looking back to the results and achievements of the previous year, definitely we have done well in
most of the areas. We got the success and many achievements and now we have to keep the same
momentum so we can do better than that. I hope you have that much potential and really, you have,
just boost up yourself and go ahead. Also, be in touch of study regularly because academics are the
first preference for all that and along with that, other things to be done. Now in this August, we will
have to do many events and have to participate in various activities. Prepare for that, participate in
various activities. . Make you prepare and go ahead. I wish you all the best. All the best! Happy
wishes for Independence Day!
Dr. P. V. Walke
HoD, Department of Mechanical Engineering, GHRCE, Nagpur
Head of Department From the
Desk
of.….
BEST
DEPARTMENT
OF
THE
YEAR
2016-17
WORKSHOP
S
TECHNICAL CULTURAL
NON
TECHNICAL
ACHIEVEMENT
PROJETCS
ACADEMICS
AWARDS
Departmental Forum Body Formation.
For the department forum committee, the
interview was held for different post and the
committee is formed on date 04/07/2017. Mr.
Ankush Ingle V-Sem. Sec.B and Mr. Omkar
Gupta were selected for the post of President and
vice president respectively.
Interview of Forum body selection
Forum Body Committee office bearer with faculty
members
For the interview Dr. P.V.Walke, HOD, Prof.
Skumar S. Kumbhalkar, Forum Incharge, Prof.
N.P.Awate, Prof. V.N.Kshirgagar and Prof.
K.S.Chaudhari Forum Co Inchagre were present.
The Office bearer of Departmental Forum 2017-
2018 have been selected the list of Office bearer
for session2017-2018 are as follow:
Post: Name of Students
President: Ankush D Ingale
Vice president : Omkar Gupta
Organizing Secretary: Bhushan Dwarkewasi
Joint Secretary : Shivam Singh
Cultural Secretary:Trunal Bhagat
Treasurer: 1. Pravin Belkhode
2. Raksha Bhonde
Sports President:Mayank Jaiswal
Sport Vice President:Prashant Raghuwanshi
Sports vice President(Girls):Tejaswini Alone
Discipline Incharge: Prajwal Rathod
Discipline Co-incharge:Akshay Bodi, Tejas
Vikhe
Discipline Incharge (girls):Trishala Adyalkar
Movie and Technical head: Yash Tichkule
News Editor: 1.Aman Agrahari
News Editor :2. Sajid Sayyad
Report on Guest Lecture
A guest lecture was organized for V B for subject
Energy Conversion-I and Power Plant
Engineering, on 4/7/2017, from 10:30 AM to
11:30 AM. Nearly 70 students attended the guest
lecture. The guest lecture title was “Technologies
used in Power Plant”. The eminent personality for
delivering lecture was Mr. Dhruv Bevapurkar
(Manager, Material Handling Department, Voltas
Nagpur ).
Mr. Dhruv was keen in making the session
interactive & he did it successfully. The students
interacted & shared their views with the guest.
The guest focused on importance of working
safety in Power plant & various energy
conversion devices like condenser, boiler, cooling
tower etc.
The guest created curiosity amongst the students
to think whether why they want to go in Power
Plant. He focused on complete working of Power
plant. The guest lecture was conducted in the
presence of Prof. K.S.Chaudhari subject teacher
of Energy conversion-I, Power Plant engineering
and Prof. S. Kumbhalkar (Class In charge of V-
B).
SAE COLLEGIATE CLUB GHRCE
participated in VIRTUAL BAJA-2017
at Chitkara university Chandigarh.
SAE Collegiate Club Student team member at
Chitkara Univercity , Chandhigarh
SAE Collegiate Club of Department of Mechanical
Engineering GHRCE Nagpur is Affiliated with SAE
INDIA .West Region Pune have been participated in
National level All Terrain Vehicle( ATV) design
competition SAE INDIA BAJA-2018. For the
selection in final BAJA event SAE INDIA organized
VIRTUAL BAJA for the evaluation of student CAR
design work and action plan of actual BAJA vehicle
and development . This year VIRTUL BAJA -2017
eveny of SAE INDIA was held at Chitkar University ,
Chandigarh , from 13/07/2017 to
15/7/2017. In this event SAE collegiate club GHRCE
Team Die Kriegers of 25student members have been
participated . For theSAE INDIA Virtual BAJA team
members of Team Die Kriegers Miss Tejaswini
Alone,and Mr. Pranay Bhadel Design section,
Raksha Bonde, Brake section, Sudhanshu Thakur,
Steering section , Ajinkya Sawarkar and Aman
Agrahari Transmission section , and Mr. Swapnil
umredkar suspension section have been represent
GHRCE car design in front of jury. In this national
level ATV CAR design competition all over INDIA
350 colleges have been participated . On the basis of
VIRTUAL BAJA-2017 final scoring team of
respective college will be qualify for final SAE
BAJA-2018 competition at NaTRIP Track
Prithampur.
Team member of Team Die Kriegers GHRCE Nagpur
and SAE Collegiate Club GHRCE Nagpur, have given
credit of success to represent GHRCE car design in
this mega event to Hon’ble Dr. P. R. Bajaj , Director,
GHRCE, Dr. P. V. Walke Head of Department,
Mechanical Engineering , Prof. V. S .Khangar , Dean
IIP Cell GHRCE Nagpur, Prof. Nilesh Awate, Faculty
Advisor SAE Collegiate Club GHRCE Nagpur, and
Prof. Amol Pitale, Additional, Faculty Advisor SAE
Collegiate Club GHRCE Nagpur
Search It if You Can
An event organized under forum of Mechanical
Department
`Search it if you can‘ a fun, yet learning event
organized by the Mechanical Department of GH
Raisoni College Of Engineering was held at college
campus on 13thJuly 2017. This event was inaugurated
by HOD of mechanical department, Dr P.V.Walke and
Dr A. K. Mahale. The faculty in charge to supervise
the event was Prof. S Kumar S. Kumbhalkar, Fourm
Inchagre and Prof. Karan S. Chaudhary Co-inchagre
Mechanical Dept. The students of forum committee
organized and planned this event which was carried
out in full discipline. A total of 90 groups with 3
members in each group participated, which was an
overwhelming response by the students from all the
departments.
This competition had three different levels - the first
one was aptitude test which was completed by 10
groups who then reached to the second level where
there were clues in the form of riddles. The final stage
was finding the clue in which four groups, who were
the finalists, competed. Ritik Verma and group (third
year mechanical department students) emerged as the
winner of this engaging competition. The event
concluded with certificates distribution.
Alumni Activity
Mr. Abhijeet Linge, CEO, Datta Enterprises guiding students
Department of Mechanical Engineering has organized
the expert talk on 15-07/2017 by Mr. Abhijeet Linge,
CEO, Datta Enterprises and modular kitchen,
Hingna MIDC, Nagpur for the students of V
semester Section B. He is the alumni of 2005
batch. He has guided the students regarding
entrepreneurship skills and the modular industries.
The activity is carried out under the guidance of
Dr S R Karale and Mr Laukik P. Raut, T and
Incharge, department of Mechanical Engineering.
.
Surprise visit to Electric loco shed Ajni,
Nagpur
Seventh semester students are currently doing their six
months industry internship in Electric loco shed Ajani.
Prof. V S Khangar, Prof. V M Wankar, Prof. L P Raut
have visited on dated 16th July 2017 to monitor
performance of intern students. These students are
supervised by Mr. Bele, Sr. section engineer.
During the visit all three students were present and
discussed about project work with faculties and their
company supervisor. The failure of spring can be one
of the project was suggested by Mr. Bele. Faculties
interacted with Mr. Bele, to check the
performance of student in industry on the parameter
like daily attendance, nature of behavior, problem
solving technique, etc.
Industrial Visit to “Mahalaxmi Dhatu Udyog
pvt. Ltd., Nagpur” organized by Mech. Engg.
Dept., GHRCE, Nagpur
The Department of Mechanical Engineering of G. H.
Raisoni College of Engineering Nagpur has organized
Industrial Visit at Mahalaxmi Dhatu Udyog pvt. Ltd.
MIDC, Nagpur, for B.E. Third semester Section –B
students on 27/07/2017.
Mr. M.L. Rathi, Plant in-charge helped us for
organizing this industrial visit & has given brief
information about the company. Mr. Rahul, plant
engineer taken care for the plant visit. Mahalaxmi
Dhatu Udyog pvt. Ltd., Nagpur, basically Factory
produces angles of mild steel and high tensile steels.
The student of III semester Section –B along with
Prof. Swapnil B. Soni and Prof Akshay S. Wagh
visited the company at 11.00 AM. Mr. Rahul took
students into the factory and briefed the processes of
steels. The students entered into shop floor with the
personnel of industry. There they saw the raw material
(Mild steel and High Tensile steel) sampling for
chemical testing followed by hot rolling process for
the formation of angle shaped final products. The raw
material is purchased from Rashtriya Ispat Nigam
Limited and coal comes from WCL. The raw billets
are heated upto the temperature of 1300oC. Then is it
sent for hot rolling process. The finished products are
tested on UTM and Charpy & Izod machine. The final
products after testing and straightening are packed for
dispatch.
The credit for the success of visit goes to Dr. P. V.
Walke (HoD), Prof. K. S. Rambhad, Prof. Swapnil B.
Soni and Prof Akshaya S. Wagh and all faculties and
student participants.
Installation of SAE Collegiate Club
GHRCE Nagpur
SAE Collegiate Club office bearer with faculty
members
Department of Mechanical engineering GHRCE
Nagpur have been conducting installation program of
Student professional Society SAE INDIA for
session2017-2018 . This installation program was on
25/5/2017 in presence of Dr P.V. Walke Head of
Department he SAE Collegiate Club of Department of
Mechanical Engineering GHRCE Nagpur For session
2017-2018 SAE Collegiate Club have been register
first slot of student member of with 266 and 4 faculty
