To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.
For more product details, please visit GIGABYTE's website.
GA-A320M-H
User's ManualRev. 1001
Copyright© 2018 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
DisclaimerInformation in this manual is protected by copyright laws and is the property of GIGABYTE.
ChangestothespecificationsandfeaturesinthismanualmaybemadebyGIGABYTEwithoutpriornotice.No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or
by any means without GIGABYTE's prior written permission.
� In order to assist in the use of this product, carefully read the User's Manual.
� For product-related information, check on our website at: https://www.gigabyte.com
Identifying Your Motherboard RevisionThe revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means
the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard
BIOS, drivers, or when looking for technical information.
Example:
Motherboard
GA-A320M-H
Sept. 7, 2018
Sept. 7, 2018
Motherboard
GA-A320M-H
- 3 -
Table of Contents
GA-A320M-H Motherboard Layout ..................................................................................4
Chapter 1 Hardware Installation .....................................................................................5
1-1 Installation Precautions .................................................................................... 5
1-2 ProductSpecifications ...................................................................................... 6
1-3 Installing the CPU ............................................................................................ 9
1-4 Installing the Memory ....................................................................................... 9
1-5 Installing an Expansion Card ......................................................................... 10
1-6 Back Panel Connectors .................................................................................. 10
1-7 Internal Connectors ........................................................................................ 12
Chapter 2 BIOS Setup ..................................................................................................20
2-1 Startup Screen ............................................................................................... 20
2-2 M.I.T. .............................................................................................................. 21
2-3 System ........................................................................................................... 25
2-4 BIOS ............................................................................................................... 26
2-5 Peripherals ..................................................................................................... 29
2-6 Chipset ........................................................................................................... 30
2-7 Power ............................................................................................................. 32
2-8 Save & Exit ..................................................................................................... 34
Chapter 3 Appendix ......................................................................................................35
3-1 ConfiguringaRAIDSet .................................................................................. 35
3-2 DriversInstallation .......................................................................................... 37
RegulatoryStatements .............................................................................................. 38
Contact Us ................................................................................................................ 40
- 4 -
GA-A320M-H Motherboard Layout
* The box contents above are for reference only and the actual items shall depend on the product package you obtain.
The box contents are subject to change without notice.
Box Contents
5 GA-A320M-H motherboard 5 Two SATA cables
5 Motherboard driver disk 5 I/O Shield
5 User's Manual
KB_MSCPU_FAN
SYS_FAN1
ATX
GA-A320M-H
AUDIO DDR4
_2
DDR4
_1
BAT
ATX_12V
AMDA320
R_USB30_1
HDMI
CODEC
M_BIOS
DVI
PCIEX16
PCIEX1_1
PCIEX1_2 iTE® Super I/O
Realtek® GbE LAN
F_USB30CI
SPEAKER
F_USB1 F_PANELF_USB2SPDIF_O
SATA3
01
2
USB_LAN
Socket AM4
R_USB30_2
3
CLR_CMOSTPM
F_AUDIO
M2F_32G80 60 42110
SATA3
Chapter 1 Hardware Installation
1-1 Installation PrecautionsThe motherboard contains numerous delicate electronic circuits and components which can become
damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser'smanual and follow these procedures:
• Prior to installation, make sure the chassis is suitable for the motherboard.
• Prior to installation, donot removeor breakmotherboardS/N (SerialNumber) sticker orwarranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best towear an electrostatic discharge (ESD)wrist strapwhen handling electroniccomponentssuchasamotherboard,CPUormemory.IfyoudonothaveanESDwriststrap,keepyourhandsdryandfirsttouchametalobjecttoeliminatestaticelectricity.
• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before connecting or unplugging the power supply cable from the motherboard, make sure
the power supply has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Donotplacethecomputersystemonanunevensurface. • Donotplacethecomputersysteminahigh-temperatureorwetenvironment. • Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertifiedcomputertechnician. • If you use an adapter, extension power cable, or power strip, ensure to consult with its installation
and/or grounding instructions.
- 5 -
1-2 ProductSpecificationsCPU � AM4 Socket:
- AMDRyzen™ processor
- AMD7thGenerationA-series/Athlon™ processors
(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)
Chipset � AMDA320
Memory � 2xDDR4DIMMsocketssupportingupto32GBofsystemmemory � Dualchannelmemoryarchitecture � SupportforDDR42667(Note1)/2400/2133MHzmemorymodules � Support forECCUn-bufferedDIMM1Rx8/2Rx8memorymodules (operate in
non-ECCmode) � Supportfornon-ECCUn-bufferedDIMM1Rx8/2Rx8/1Rx16memorymodules � SupportforExtremeMemoryProfile(XMP)memorymodules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)Onboard
Graphics
� Integrated Graphics Processor:
- 1xDVI-Dport,supportingamaximumresolutionof1920x1200@60Hz* TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.
- 1xHDMIport,supportingamaximumresolutionof4096x2160@24Hz* SupportforHDMI1.4version.
� Maximum shared memory of 2 GB
Audio � Realtek® ALC887 codec
� HighDefinitionAudio � 2/4/5.1/7.1-channel
* Toconfigure7.1-channelaudio,youhavetouseanHDfrontpanelaudiomoduleand enable the multi-channel audio feature through the audio driver.
� SupportforS/PDIFOut
LAN � Realtek®GbELANchip(10/100/1000Mbit)
Expansion Slots � 1 x PCI Express x16 slot, running at x16 (Note1)
(ThePCIEX16slotconformstoPCIExpress3.0standard.) � 2 x PCI Express x1 slots
(ThePCIExpressx1slotsconformtoPCIExpress2.0standard.)Storage Interface � 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe
x4/x2 (Note2)SSDsupport) � 4 x SATA 6Gb/s connectors
� SupportforRAID0,RAID1,andRAID10* Referto"1-7InternalConnectors,"fortheinstallationnoticesfortheM.2connector.
USB � Chipset:
- 2 x USB 3.1 Gen 1 ports available through the internal USB header
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
theinternalUSBheaders) � CPU:
- 4 x USB 3.1 Gen 1 ports on the back panel
(Note1) ActualsupportmayvarybyCPU.(Note2) SupportsonlyM.2SATASSDswhenusinganAMD7thGenerationA-seriesorAthlon™ processor.
- 6 -
Internal
Connectors
� 1 x 24-pin ATX main power connector
� 1 x 8-pin ATX 12V power connector
� 1 x CPU fan header
� 1 x system fan header
� 1 x M.2 Socket 3 connector
� 4 x SATA 6Gb/s connectors
� 1 x front panel header
� 1 x front panel audio header
� 1xS/PDIFOutheader � 1 x USB 3.1 Gen 1 header
� 2 x USB 2.0/1.1 headers
� 1xTrustedPlatformModule(TPM)header(2x10pin,fortheGC-TPM2.0moduleonly) � 1 x speaker header
� 1 x Clear CMOS jumper
� 1 x chassis intrusion header
Back Panel
Connectors
� 1 x PS/2 keyboard port
� 1 x PS/2 mouse port
� 1xDVI-Dport � 1xHDMIport � 4 x USB 3.1 Gen 1 ports
� 2 x USB 2.0/1.1 ports
� 1xRJ-45port � 3 x audio jacks
I/O Controller � iTE® I/O Controller Chip
Hardware
Monitor
� Voltage detection
� Temperature detection
� Fan speed detection
� Overheating warning
� Fan fail warning
� Fan speed control* Whether the fan speed control function is supported will depend on the cooler you
install.
BIOS � 1x128Mbitflash � Use of licensed AMI UEFI BIOS
� PnP1.0a,DMI2.7,WfM2.0,SMBIOS2.7,ACPI5.0
- 7 -
Unique Features � Support for APP Center* Available applications in APP Center may vary by motherboard model. Supported
functionsofeachapplicationmayalsovarydependingonmotherboardspecifications.- @BIOS- 3DOSD- AutoGreen
- Cloud Station
- EasyTune
- Fast Boot
- Game Boost
- ON/OFF Charge
- Smart Backup
- Smart Keyboard
- Smart TimeLock
- System Information Viewer
- USB Blocker
� Support for Q-Flash
� Support for Xpress Install
Bundled
Software
� Norton®InternetSecurity(OEMversion) � cFosSpeed
Operating
System
� Support for Windows 10 64-bit
� Support for Windows 7 64-bit* Pleasedownloadthe"WindowsUSBInstallationTool" fromGIGABYTE'swebsite
and install it before installing Windows 7.
Form Factor � Micro ATX Form Factor; 24.4cm x 19.5cm
* GIGABYTEreservestherighttomakeanychangestotheproductspecificationsandproduct-relatedinformationwithoutprior notice.
Please visit GIGABYTE's website
for support lists of CPU, memory
modules,SSDs,andM.2devices.
Please visit the Support\Utility List
page on GIGABYTE's website to
download the latest version of apps.
- 8 -
1-3 Installing the CPU
ReadthefollowingguidelinesbeforeyoubegintoinstalltheCPU: • Make sure that the motherboard supports the CPU.
(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.) • Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.
• Apply an even and thin layer of thermal grease on the surface of the CPU.
• DonotturnonthecomputeriftheCPUcoolerisnotinstalled,otherwiseoverheatinganddamageof the CPU may occur.
• SettheCPUhostfrequencyinaccordancewiththeCPUspecifications.Itisnotrecommendedthatthesystembusfrequencybesetbeyondhardwarespecificationssinceitdoesnotmeetthestandard requirements for the peripherals. If you wish to set the frequency beyond the standard
specifications,pleasedosoaccordingtoyourhardwarespecificationsincludingtheCPU,graphicscard, memory, hard drive, etc.
Installing the CPULocatethepinone(denotedbyasmalltriangle)oftheCPUsocketandtheCPU.
AM4 Socket
A Small Triangle MarkingDenotesPin
One of the Socket AM4 CPU
A Small Triangle MarkingDenotes
CPU Pin One
1-4 Installing the MemoryReadthefollowingguidelinesbeforeyoubegintoinstallthememory: • Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemorymodules.) • Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
• Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
Please visit GIGABYTE's website for details on hardware installation.
- 9 -
1-5 Installing an Expansion CardReadthefollowingguidelinesbeforeyoubegintoinstallanexpansioncard: • Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
• Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
1-6 Back Panel Connectors
PS/2 Keyboard and PS/2 Mouse Port
Usetheupperport(green)toconnectaPS/2mouseandthelowerport(purple)toconnectaPS/2keyboard.
DVI-D Port (Note)
TheDVI-DportconformstotheDVI-Dspecificationandsupportsamaximumresolutionof1920x1200@60Hz(theactualresolutionssupporteddependonthemonitorbeingused).ConnectamonitorthatsupportsDVI-Dconnectiontothisport.HDMI Port
TheHDMIport isHDCPcompliantandsupportsDolbyTrueHDandDTSHDMasterAudio formats. It also supports up to 192KHz/24bit 8-channel LPCM
audiooutput.YoucanusethisporttoconnectyourHDMI-supportedmonitor.Themaximumsupportedresolution is 4096x2160@24Hz, but theactual resolutions supportedaredependent on themonitorbeing used.
AfterinstallingtheHDMIdevice,makesuretosetthedefaultsoundplaybackdevicetoHDMI.(Theitemnamemaydifferdependingonyouroperatingsystem.)
(Note) TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.
DualChannelMemoryConfigurationThismotherboardprovidestwomemorysocketsandsupportsDualChannelTechnology.After thememoryisinstalled,theBIOSwillautomaticallydetectthespecificationsandcapacityofthememory.EnablingDualChannel memory mode will double the original memory bandwidth.
ThetwoDDR4memorysocketsaredividedintotwochannelsandeachchannelhasonememorysocketasfollowing:
�ChannelA:DDR4_2 �ChannelB:DDR4_1
DuetoCPUlimitations,readthefollowingguidelinesbeforeinstallingthememoryinDualChannelmode.1. DualChannelmodecannotbeenabledifonlyonememorymoduleisinstalled.2. WhenenablingDualChannelmodewithtwomemorymodules,itisrecommendedthatmemoryof
the same capacity, brand, speed, and chips be used.
- 10 -
USB 2.0/1.1 Port
TheUSBportsupportstheUSB2.0/1.1specification.UsethisportforUSBdevices.Line In/Rear Speaker Out (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack.
Mic In/Center/Subwoofer Speaker Out (Pink)
The Mic in jack.
Toconfigure7.1-channelaudio,youhavetouseanHDfrontpanelaudiomoduleandenablethemulti-channel audio feature through the audio driver.
• Whenremovingthecableconnectedtoabackpanelconnector,firstremovethecablefromyourdevice and then remove it from the motherboard.
• Whenremovingthecable,pull itstraightoutfromtheconnector.Donotrockitsidetosidetoprevent an electrical short inside the cable connector.
ActivityLEDConnection/SpeedLED
LAN Port
ActivityLED:Connection/SpeedLED:State DescriptionOrange 1 Gbps data rate
Green 100 Mbps data rate
Off 10 Mbps data rate
State DescriptionBlinking DatatransmissionorreceivingisoccurringOff No data transmission or receiving is occurring
USB 3.1 Gen 1 Port
TheUSB3.1Gen1portsupports theUSB3.1Gen1specificationand iscompatible to theUSB2.0specification.UsethisportforUSBdevices.RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describesthestatesoftheLANportLEDs.
AudioJackConfigurations:
Jacks Headphone/
2-channel4-channel 5.1-channel 7.1-channel
LineIn/RearSpeakerOut a a a
Line Out/Front Speaker Out a a a a
Mic In/Center/Subwoofer Speaker Out a a
Front Panel Line Out/Side Speaker Out a
PleasevisitGIGABYTE'swebsitefordetailsonconfiguringtheaudiosoftware.
- 11 -
1-7 Internal Connectors
Readthefollowingguidelinesbeforeconnectingexternaldevices: • First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1) ATX_12V
2) ATX
3) CPU_FAN
4) SYS_FAN1
5) SATA3 0/1/2/3
6) M2F_32G
7) SPDIF_O
8) F_PANEL
9) F_AUDIO
10) SPEAKER
11) F_USB30
12) F_USB1/F_USB2
13) TPM
14) BAT
15) CI
16) CLR_CMOS
1
2
3
11
14
7 129 13
6
4
5
8 101615
- 12 -
131
2412
ATX
1/2) ATX_12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components
onthemotherboard.Beforeconnectingthepowerconnector,firstmakesurethepowersupplyisturnedoff and all devices are properly installed. The power connector possesses a foolproof design. Connect the
power supply cable to the power connector in the correct orientation.
The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,
the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high
powerconsumptionbeused(500Worgreater).Ifapowersupplyisusedthatdoesnotprovidetherequired power, the result can lead to an unstable or unbootable system.
ATX:
Pin No. Definition Pin No. Definition1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND4 +5V 16 PS_ON(softOn/Off)5 GND 17 GND6 +5V 18 GND7 GND 19 GND8 Power Good 20 NC
9 5VSB(standby+5V) 21 +5V
10 +12V 22 +5V
11 +12V (Only for 2x12-pin
ATX)23 +5V(Onlyfor2x12-pinATX)
12 3.3V (Only for 2x12-pin
ATX)24 GND(Onlyfor2x12-pinATX)
ATX_12V:
Pin No. Definition Pin No. Definition1 GND(Onlyfor2x4-pin12V) 5 +12V(Onlyfor2x4-pin12V)2 GND(Onlyfor2x4-pin12V) 6 +12V(Onlyfor2x4-pin12V)3 GND 7 +12V
4 GND 8 +12VATX_12V
58
14
- 13 -
5) SATA3 0/1/2/3 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support
RAID0,RAID1,andRAID10.RefertoChapter3,"ConfiguringaRAIDSet,"forinstructionsonconfiguringaRAIDarray.
Pin No. Definition1 GND2 TXP
3 TXN
4 GND5 RXN6 RXP7 GND
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
• Thesefanheadersarenotconfigurationjumperblocks.Donotplaceajumpercapontheheaders.
3/4) CPU_FAN/SYS_FAN1 (Fan Headers) All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.
When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire
isthegroundwire).ThemotherboardsupportsCPUfanspeedcontrol,whichrequirestheuseofaCPUfan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be
installed inside the chassis.
CPU_FAN
1
SYS_FAN1
1
SATA3
2
1
0
Pin No. Definition1 GND2 Voltage Speed Control
3 Sense
4 PWM Speed Control
71
71
71
71
3
- 14 -
6) M2F_32G (M.2 Socket 3 Connector) TheM.2connectorsupportsM.2SATASSDsorM.2PCIeSSDsandsupportsSATARAIDconfiguration.
PleasenotethatanM.2PCIeSSDcannotbeusedtocreateaRAIDarray.RefertoChapter3,"ConfiguringaRAIDSet,"forinstructionsonconfiguringaRAIDarray.
FollowthestepsbelowtocorrectlyinstallanM.2SSDintheM.2connector.Step 1:
Use a screw driver to unfasten the screw and standoff from the motherboard. Locate the proper mounting
holefortheM.2SSDtobeinstalledandthenscrewthestandofffirst.Step 2:
SlidetheM.2SSDintotheconnectoratanangle.Step 3:
PresstheM.2SSDdownandthensecureitwiththescrew.
SelecttheproperholefortheM.2SSDtobeinstalledandrefastenthescrewandstandoff.
80110 60 42
7) SPDIF_O (S/PDIF Out Header) ThisheadersupportsdigitalS/PDIFOutandconnectsaS/PDIFdigitalaudiocable(providedbyexpansion
cards)fordigitalaudiooutputfromyourmotherboardtocertainexpansioncardslikegraphicscardsandsoundcards.Forexample,somegraphicscardsmayrequireyoutouseaS/PDIFdigitalaudiocablefordigitalaudiooutputfromyourmotherboardtoyourgraphicscardifyouwishtoconnectanHDMIdisplaytothegraphicscardandhavedigitalaudiooutputfromtheHDMIdisplayatthesametime.ForinformationaboutconnectingtheS/PDIFdigitalaudiocable,carefullyreadthemanualforyourexpansioncard.
Pin No. Definition1 SPDIFO2 GND1
Installation Notices for the M.2 Connector:SupportsonlyM.2SATASSDswhenusinganAMD7thGenerationA-seriesorAthlon™processor.Referto the following table for details.
M.2PCIeSSD M.2SATASSD
Ryzen™ processor a a
7th Generation A-series/Athlon™ processors r a
a: Available, r: Not available
CPUTypeofM.2SSD
- 15 -
9) F_AUDIO (Front Panel Audio Header) ThefrontpanelaudioheadersupportsHighDefinitionaudio(HD).Youmayconnectyourchassisfront
panel audio module to this header. Make sure the wire assignments of the module connector match the
pin assignments of the motherboard header. Incorrect connection between the module connector and the
motherboard header will make the device unable to work or even damage it.
Some chassis provide a front panel audio module that has separated connectors on each wire
instead of a single plug. For information about connecting the front panel audio module that has
different wire assignments, please contact the chassis manufacturer.
Pin No. Definition Pin No. Definition1 MIC2_L 6 Sense
2 GND 7 FAUDIO_JD3 MIC2_R 8 No Pin
4 NC 9 LINE2_L
5 LINE2_R 10 Sense
1
2
9
10
8) F_PANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according
to the pin assignments below. Note the positive and negative pins before connecting the cables.
• PW(PowerSwitch): Connectstothepowerswitchonthechassisfrontpanel.Youmayconfigure
the way to turn off your system using the power switch (refer to Chapter
2,"BIOSSetup,""Power,"formoreinformation). • HD(HardDriveActivityLED): ConnectstotheharddriveactivityLEDonthechassisfrontpanel.The
LEDisonwhentheharddriveisreadingorwritingdata. • RES(ResetSwitch):
Connects to the reset switch on the chassis front panel. Press the reset
switchtorestartthecomputerifthecomputerfreezesandfailstoperforma normal restart.
• NC: No connection.
• PLED(PowerLED):System Status LEDS0 On
S3/S4/S5 Off
Connects to the power status indicator on the
chassis front panel.TheLED is onwhen thesystem isoperating.TheLED isoffwhen thesystem is in S3/S4 sleep state or powered
off(S5).
The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch,
powerLED,harddriveactivityLEDandetc.Whenconnectingyourchassisfrontpanelmoduletothisheader,make sure the wire assignments and the pin assignments are matched correctly.
1
2
9
10
NC
PLED
-
PW
-
PLED
+
PW
+HD
-
RES+
HD+
RES-
PowerLED Power Switch
HardDriveActivityLED
ResetSwitch
- 16 -
Pin No. Definition Pin No. Definition1 VBUS 11 D2+2 SSRX1- 12 D2-3 SSRX1+ 13 GND4 GND 14 SSTX2+
5 SSTX1- 15 SSTX2-
6 SSTX1+ 16 GND7 GND 17 SSRX2+8 D1- 18 SSRX2-9 D1+ 19 VBUS
10 NC 20 No Pin
11) F_USB30 (USB 3.1 Gen 1 Header) TheheaderconformstoUSB3.1Gen1andUSB2.0specificationandcanprovidetwoUSBports.For
purchasingtheoptional3.5"frontpanelthatprovidestwoUSB3.1Gen1ports,pleasecontactthelocaldealer.
10
11
1
20
10) SPEAKER (Speaker Header) Connects to the speaker on the chassis front panel. The system reports system startup status by issuing
a beep code. One single short beep will be heard if no problem is detected at system startup.
Pin No. Definition1 VCC
2 NC
3 NC
4 SPK-
1
Prior to installing the USB front panel, be sure to turn off your computer and unplug the power cord
from the power outlet to prevent damage to the USB front panel.
12) F_USB1/F_USB2 (USB 2.0/1.1 Headers) TheheadersconformtoUSB2.0/1.1specification.EachUSBheadercanprovidetwoUSBportsviaan
optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
Pin No. Definition Pin No. Definition1 Power(5V) 6 USBDY+2 Power(5V) 7 GND3 USBDX- 8 GND4 USBDY- 9 No Pin
5 USBDX+ 10 NC
• DonotplugtheIEEE1394bracket(2x5-pin)cableintotheUSB2.0/1.1header. • Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord
from the power outlet to prevent damage to the USB bracket.
10
9
2
1
- 17 -
13) TPM (Trusted Platform Module Header) YoumayconnectaTPM(TrustedPlatformModule)tothisheader.
20
19
2
1
Pin No. Definition Pin No. Definition1 LCLK 11 LAD02 GND 12 GND3 LFRAME 13 NC
4 No Pin 14 NC
5 LRESET 15 SB3V
6 NC 16 SERIRQ7 LAD3 17 GND8 LAD2 18 NC
9 VCC3 19 NC
10 LAD1 20 NC
14) BAT (Battery) Thebatteryprovidespowertokeepthevalues(suchasBIOSconfigurations,date,andtimeinformation)
intheCMOSwhenthecomputeristurnedoff.Replacethebatterywhenthebatteryvoltagedropstoalowlevel, or the CMOS values may not be accurate or may be lost.
You may clear the CMOS values by removing the battery:
1. Turn off your computer and unplug the power cord.
2. Gently remove the battery from the battery holder and wait for one minute. (Or
use a metal object like a screwdriver to touch the positive and negative terminals
ofthebatteryholder,makingthemshortfor5seconds.)3. Replacethebattery.4. Plug in the power cord and restart your computer.
• Always turn off your computer and unplug the power cord before replacing the battery.
• Replacethebatterywithanequivalentone.Damagetoyourdevicesmayoccurifthebatteryisreplaced with an incorrect model.
• Contact the place of purchase or local dealer if you are not able to replace the battery by yourself
or uncertain about the battery model.
• Wheninstallingthebattery,notetheorientationofthepositiveside(+)andthenegativeside(-)ofthebattery(thepositivesideshouldfaceup).
• Used batteries must be handled in accordance with local environmental regulations.
- 18 -
16) CLR_CMOS (Clear CMOS Jumper) UsethisjumpertocleartheBIOSconfigurationandresettheCMOSvaluestofactorydefaults.Toclear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
• Aftersystemrestart,gotoBIOSSetuptoloadfactorydefaults(selectLoadOptimizedDefaults)ormanuallyconfiguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOSconfigurations).
Open: Normal
Short: Clear CMOS Values
15) CI (Chassis Intrusion Header) This motherboard provides a chassis detection feature that detects if the chassis cover has been removed.
This function requires a chassis with chassis intrusion detection design.
1
Pin No. Definition1 Signal
2 GND
- 19 -
Chapter 2 BIOS Setup
BIOS (Basic Input andOutputSystem) records hardware parameters of the system in theCMOSon themotherboard.ItsmajorfunctionsincludeconductingthePower-OnSelf-Test(POST)duringsystemstartup,saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows
theusertomodifybasicsystemconfigurationsettingsortoactivatecertainsystemfeatures.When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to
keeptheconfigurationvaluesintheCMOS.ToaccesstheBIOSSetupprogram,pressthe<Delete>keyduringthePOSTwhenthepoweristurnedon.ToupgradetheBIOS,useeithertheGIGABYTEQ-Flashor@BIOSutility. • Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.
• @BIOSisaWindows-basedutilitythatsearchesanddownloadsthelatestversionofBIOSfromtheInternetand updates the BIOS.
• BecauseBIOSflashingispotentiallyrisky,ifyoudonotencounterproblemsusingthecurrentversionofBIOS,itisrecommendedthatyounotflashtheBIOS.ToflashtheBIOS,doitwithcaution.InadequateBIOSflashingmay result in system malfunction.
• Itisrecommendedthatyounotalterthedefaultsettings(unlessyouneedto)topreventsysteminstabilityorotherunexpected results. Inadequately altering the settings may result in system's failure to boot. If this occurs, try to
cleartheCMOSvaluesandresettheboardtodefaultvalues.(Refertothe"LoadOptimizedDefaults"sectioninthischapterorintroductionsofthebattery/clearCMOSjumperinChapter1forhowtocleartheCMOSvalues.)
2-1 Startup ScreenThe following startup Logo screen will appear when the computer boots.
(SampleBIOSVersion:F10d)
• When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults.
• The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.
Function Keys
TherearetwodifferentBIOSmodesasfollowsandyoucanusethe<F2>keytoswitchbetweenthetwomodes.The Classic Setup mode provides detailed BIOS settings. You can press the arrow keys on your keyboard to move
amongtheitemsandpress<Enter>toacceptorenterasub-menu.Oryoucanuseyourmousetoselecttheitem you want. Easy Mode allows users to quickly view their current system information or to make adjustments
foroptimumperformance.InEasyMode,youcanuseyourmousetomovethroughconfigurationitems.
- 20 -
2-2 M.I.T.
Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall
systemconfigurations.Incorrectlydoingoverclock/overvoltagemayresultindamagetoCPU,chipset,ormemoryand reduce the useful life of these components. This page is for advanced users only and we recommend you not to
alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings
mayresultinsystem'sfailuretoboot.Ifthisoccurs,cleartheCMOSvaluesandresettheboardtodefaultvalues.)
` Advanced Frequency Settings
& Host Clock Value DisplaysthecurrentoperatingHostClockfrequency.
& CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
& CPU Frequency DisplaysthecurrentoperatingCPUfrequency.
` Advanced CPU Core Settings
& CPU Clock Ratio, CPU Frequency The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Core Performance Boost (Note)
Allows you to determinewhether to enable theCorePerformanceBoost (CPB) technology, aCPUperformance-boosttechnology.(Default:Auto)
& Core Performance Boost Ratio (Note)
Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed.
(Default:Auto) & Turbo Performance Boost Ratio (Note)
AllowsyoutodeterminewhethertoimproveCPUperformance.(Default:Disabled)
(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.
- 21 -
(Note1) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.(Note2) ThisitemispresentonlywhenyouinstallaCPUandamemorymodulethatsupportthisfeature.
& AMD Cool&Quiet function �Enabled LetstheAMDCool'n'QuietdriverdynamicallyadjusttheCPUclockandVIDto
reduceheatoutputfromyourcomputeranditspowerconsumption.(Default) �Disabled Disablesthisfunction.
& SVM Mode VirtualizationenhancedbyVirtualizationTechnologywillallowaplatformtorunmultipleoperatingsystems
andapplicationsinindependentpartitions.Withvirtualization,onecomputersystemcanfunctionasmultiplevirtualsystems.(Default:Disabled)
& C6 Mode (Note 1)
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
stateisamoreenhancedpower-savingstatethanC1.(Default:Enabled) & Global C-state Control (Note 1)
Allows you to determine whether to let the CPU enter C states. When enabled, the CPU core frequency
willbereducedduringsystemhaltstatetodecreasepowerconsumption.(Default:Enabled) & Power Supply Idle Control
Enables or disables Package C6 State.
�TypicalCurrentIdle Disablesthisfunction. �Low Current Idle Enables this function.
�Auto LetstheBIOSautomaticallyconfigurethissetting. (Default) & Opcache Control (Note 1)
Enables or disables Opcache. AutoletstheBIOSautomaticallyconfigurethissetting.(Default:Auto) & Downcore Control (Note 1)
AllowsyoutoselectthenumberofCPUcorestoenable(thenumberofCPUcoresmayvarybyCPU).AutoletstheBIOSautomaticallyconfigurethissetting.(Default:Auto)
& SMT Mode (Note 1)
Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. This feature only works
for operating systems that support multi-processor mode. AutoletstheBIOSautomaticallyconfigurethissetting.(Default:Auto)
& ExtremeMemoryProfile(X.M.P.)(Note 2)
AllowstheBIOStoreadtheSPDdataonXMPmemorymodule(s)toenhancememoryperformancewhenenabled.
�Disabled Disablesthisfunction.(Default) �Profile1 UsesProfile1settings. �Profile2(Note2) UsesProfile2settings.
& System Memory Multiplier Allows you to set the system memory multiplier. Auto setsmemorymultiplieraccordingtomemorySPD
data.(Default:Auto) & Memory Frequency (MHz)
Thefirstmemoryfrequencyvalueisthenormaloperatingfrequencyofthememorybeingused;thesecondis the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
- 22 -
` Advanced Memory Settings & ExtremeMemoryProfile(X.M.P.)(Note 2), System Memory Multiplier, Memory Frequency(Mhz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Memory Timing Mode Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing
settingsbelowtobeconfigurable.Optionsare:Auto(default),Manual,AdvancedManual. & ProfileDDRVoltage
When using a non-XMP memory module or ExtremeMemoryProfile(X.M.P.) is set to Disabled, the value
isdisplayedaccordingtoyourmemoryspecification.WhenExtremeMemoryProfile(X.M.P.) is set to
Profile1 or Profile2,thevalueisdisplayedaccordingtotheSPDdataontheXMPmemory. ` Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus
DriveStrength,DataBusConfiguration Thesesectionsprovidememorytimingsettings.Therespectivetimingsettingscreensareconfigurable
only when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loadingoptimizeddefaultsorclearingtheCMOSvalues.
` Advanced Voltage Settings This sub-menu allows you to set CPU, chipset and memory voltages.
` PC Health Status
& Reset Case Open Status �Disabled Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default) �Enabled Clears the record of previous chassis intrusion status and the Case Openfieldwill
show"No"atnextboot. & Case Open
Displays thedetectionstatusof thechassis intrusiondetectiondeviceattachedto themotherboardCIheader.Ifthesystemchassiscoverisremoved,thisfieldwillshow"Yes",otherwiseitwillshow"No".Toclear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/VCORE SOC Displaysthecurrentsystemvoltages.
` Miscellaneous Settings
& PCIeSlotConfiguration Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
modeissubjecttothehardwarespecificationofeachslot.AutoletstheBIOSautomaticallyconfigurethissetting.(Default:Auto)
& 3DMark01 Enhancement Allowsyoutodeterminewhethertoenhancesomelegacybenchmarkperformance.(Default:Disabled)
- 23 -
` Smart Fan 5 Settings
& Monitor Allowsyoutoselectatargettomonitorandtomakefurtheradjustment.(Default:CPUFAN)
& Fan Speed Control Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
�Normal Allows the fan to run at different speeds according to the temperature. You can adjust
the fan speed with System Information Viewer based on your system requirements.
(Default) �Silent Allows the fan to run at slow speeds.
�Manual Allows you to control the fan speed in the curve graph.
�Full Speed Allows the fan to run at full speeds.
& Fan Control Use Temperature Input Allows you to select the reference temperature for fan speed control.
& Temperature Interval Allows you to select the temperature interval for fan speed change.
& Fan Control Mode �Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control
mode.(Default) �Voltage Voltage mode is recommended for a 3-pin fan.
�PWM PWM mode is recommended for a 4-pin fan.
& Temperature Displaysthecurrenttemperatureoftheselectedtargetarea.
& Fan Speed Displayscurrentfanspeeds.
& Flow Rate Displaystheflowrateofyourwatercoolingsystem.
& Temperature Warning Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit
warningsound.Optionsare:Disabled(default),60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.
& Fan Fail Warning Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connectionwhenthisoccurs.(Default:Disabled)
- 24 -
2-3 System
This section provides information on your motherboard model and BIOS version. You can also select the default
language used by the BIOS and manually set the system time.
& System Language Selects the default language used by the BIOS.
& System Date Setsthesystemdate.Thedateformatisweek(read-only),month,date,andyear.Use<Enter>toswitch
betweentheMonth,Date,andYearfieldsandusethe<PageUp>or<PageDown>keytosetthedesiredvalue.
& System Time Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:00:00. Use
<Enter>toswitchbetweentheHour,Minute,andSecondfieldsandusethe<PageUp>or<PageDown>key to set the desired value.
& Access Level Displaysthecurrentaccessleveldependingonthetypeofpasswordprotectionused.(Ifnopasswordis
set, the default will display as Administrator.)TheAdministratorlevelallowsyoutomakechangestoallBIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.
- 25 -
& Boot Option Priorities Specifiestheoverallbootorderfromtheavailabledevices.RemovablestoragedevicesthatsupportGPT
formatwillbeprefixedwith"UEFI:"stringonthebootdevicelist.TobootfromanoperatingsystemthatsupportsGPTpartitioning,selectthedeviceprefixedwith"UEFI:"string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit,
selecttheopticaldrivethatcontainstheWindows1064-bitinstallationdiskandisprefixedwith"UEFI:"string.
& Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities Specifiesthebootorderforaspecificdevicetype,suchasharddrives,opticaldrives,floppydiskdrives,
anddevicesthatsupportBootfromLANfunction,etc.Press<Enter>onthisitemtoenterthesubmenuthatpresents the devices of the same type that are connected. This item is present only if at least one device
for this type is installed.
& Bootup NumLock State EnablesordisablesNumlockfeatureonthenumerickeypadofthekeyboardafterthePOST.(Default:On)
& Security Option Specifieswhetherapasswordisrequiredeverytimethesystemboots,oronlywhenyouenterBIOSSetup.
Afterconfiguringthisitem,setthepassword(s)undertheAdministrator Password/User Password item.
�Setup A password is only required for entering the BIOS Setup program.
�System A password is required for booting the system and for entering the BIOS Setup
program.(Default) & Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTELogowhenthesystemstartsup.(Default:Enabled)
2-4 BIOS
- 26 -
& Fast Boot Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup
speed.(Default:Disabled) & SATA Support
�AllSataDevices AllSATAdevicesarefunctionalintheoperatingsystemandduringthePOST. �LastBootHDDOnly Exceptforthepreviousbootdrive,allSATAdevicesaredisabledbeforetheOS
bootprocesscompletes.(Default) ThisitemisconfigurableonlywhenFast Boot is set to Enabled or Ultra Fast.
& VGA Support Allows you to select which type of operating system to boot.
�Auto EnableslegacyoptionROMonly. �EFIDriver EnablesEFIoptionROM.(Default)
ThisitemisconfigurableonlywhenFast Boot is set to Enabled or Ultra Fast.
& USB Support �Disabled AllUSBdevicesaredisabledbeforetheOSbootprocesscompletes. �Full Initial All USB devices are functional in the operating system and during the POST.
(Default) �Partial Initial Part of the USB devices are disabled before the OS boot process completes.
ThisitemisconfigurableonlywhenFast Boot is set to Enabled. This function is disabled when Fast Boot
is set to Ultra Fast.
& PS2 Devices Support �Disabled AllPS/2devicesaredisabledbeforetheOSbootprocesscompletes. �Enabled All PS/2 devices are functional in the operating system and during the POST.
(Default) ThisitemisconfigurableonlywhenFast Boot is set to Enabled. This function is disabled when Fast Boot
is set to Ultra Fast.
& NetWork Stack Driver Support �Disabled Disablesbootingfromthenetwork.(Default) �Enabled Enables booting from the network.
ThisitemisconfigurableonlywhenFast Boot is set to Enabled or Ultra Fast.
& CSM Support EnablesordisablesUEFICSM(CompatibilitySupportModule)tosupportalegacyPCbootprocess.
�Enabled EnablesUEFICSM.(Default) �Disabled DisablesUEFICSMandsupportsUEFIBIOSbootprocessonly.
& LAN PXE Boot Option ROM AllowsyoutoselectwhethertoenablethelegacyoptionROMfortheLANcontroller.(Default:Disabled) ThisitemisconfigurableonlywhenCSM Support is set to Enabled.
& Storage Boot Option Control AllowsyoutoselectwhethertoenabletheUEFIorlegacyoptionROMforthestoragedevicecontroller.
�Disabled DisablesoptionROM. �UEFIOnly EnablesUEFIoptionROMonly. �LegacyOnly EnableslegacyoptionROMonly.(Default)
ThisitemisconfigurableonlywhenCSM Support is set to Enabled.
- 27 -
& Other PCI Device ROM Priority AllowsyoutoselectwhethertoenabletheUEFIorLegacyoptionROMforthePCIdevicecontrollerother
than the LAN, storage device, and graphics controllers.
�Disabled DisablesoptionROM. �UEFIOnly EnablesUEFIoptionROMonly.(Default) �LegacyOnly EnableslegacyoptionROMonly.
ThisitemisconfigurableonlywhenCSM Support is set to Enabled.
& Network Stack DisablesorenablesbootingfromthenetworktoinstallaGPTformatOS,suchasinstallingtheOSfrom
theWindowsDeploymentServicesserver.(Default:Disabled) & Ipv4 PXE Support
EnablesordisablesIPv4PXESupport.ThisitemisconfigurableonlywhenNetwork Stack is enabled.
& Ipv4 HTTP Support EnablesordisablesHTTPbootsupportforIPv4.ThisitemisconfigurableonlywhenNetwork Stack is
enabled.
& Ipv6 PXE Support EnablesordisablesIPv6PXESupport.ThisitemisconfigurableonlywhenNetwork Stack is enabled.
& Ipv6 HTTP Support EnablesordisablesHTTPbootsupportforIPv6.ThisitemisconfigurableonlywhenNetwork Stack is
enabled.
& IPSECCertificate Enablesordisables InternetProtocolSecurity.This item is configurableonlywhenNetwork Stack is
enabled.
& Administrator Password Allowsyoutoconfigureanadministratorpassword.Press<Enter>onthisitem,typethepassword,and
thenpress<Enter>.Youwillberequestedtoconfirmthepassword.Typethepasswordagainandpress<Enter>.Youmustentertheadministratorpassword(oruserpassword)atsystemstartupandwhenenteringBIOSSetup.Differingfromtheuserpassword,theadministratorpasswordallowsyoutomakechangestoall BIOS settings.
& User Password Allowsyoutoconfigureauserpassword.Press<Enter>onthisitem,typethepassword,andthenpress
<Enter>.Youwillberequestedtoconfirmthepassword.Typethepasswordagainandpress<Enter>.Youmustentertheadministratorpassword(oruserpassword)atsystemstartupandwhenenteringBIOSSetup. However, the user password only allows you to make changes to certain BIOS settings but not all.
Tocancelthepassword,press<Enter>onthepassworditemandwhenrequestedforthepassword,enterthecorrectonefirst.Whenpromptedforanewpassword,press<Enter>withoutenteringanypassword.Press<Enter>againwhenpromptedtoconfirm.
NOTE:BeforesettingtheUserPassword,besuretosettheAdministratorPasswordfirst. & Secure Boot
AllowsyoutoenableordisableSecureBootandconfigurerelatedsettings.Thisitemisconfigurableonlywhen CSM Support is set to Disabled.
- 28 -
2-5 Peripherals
& AMD CPU fTPM EnablesordisablestheTPM2.0functionintegratedintheAMDCPU.(Default:Disabled)
& Initial Display Output (Note)
SpecifiesthefirstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboardgraphics.
�IGDVideo Setstheonboardgraphicsasthefirstdisplay. �PCIe1Slot SetsthegraphicscardonthePCIEX16slotasthefirstdisplay.(Default)
& Legacy USB Support AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)
& XHCI Hand-off Determineswhether to enableXHCIHand-off feature for anoperating systemwithoutXHCIHand-off
support.(Default:Enabled) & EHCI Hand-off
Determineswhether to enableEHCIHand-off feature for anoperating systemwithoutEHCIHand-offsupport.(Default:Disabled)
& Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
forUSBkeyboards/miceinMS-DOSorinoperatingsystemthatdoesnotnativelysupportUSBdevices.(Default:Disabled)
& USB Mass Storage Driver Support EnablesordisablessupportforUSBstoragedevices.(Default:Enabled)
& USB Storage Devices DisplaysalistofconnectedUSBmassstoragedevices.ThisitemappearsonlywhenaUSBstoragedevice
is installed.
(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.
- 29 -
& HD Audio Controller Enablesordisablestheonboardaudiofunction.(Default:Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Above 4G Decoding Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system
supports64-bitPCIdecoding).SettoEnabledifmorethanoneadvancedgraphicscardareinstalledandtheir drivers are not able to be launched when entering the operating system (because of the limited 4 GB
memoryaddressspace).(Default:Disabled)
` Trusted Computing EnablesordisablesTrustedPlatformModule(TPM).
` AMD CBS Thissub-menuprovidesAMDCBS-relatedconfigurationoptions.
` Realtek PCIe GBE Family Controller Thissub-menuprovidesinformationonLANconfigurationandrelatedconfigurationoptions.
2-6 Chipset
& IOMMU EnablesordisablesAMDIOMMUsupport.(Default:Auto)
& Integrated Graphics (Note)
Enables or disables the onboard graphics function.
�Auto The BIOS will automatically enable or disable the onboard graphics depending on the
graphicscardbeinginstalled.(Default) �Disabled Disablestheonboardgraphics.
(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.
- 30 -
(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.
& UMA Frame Buffer Size (Note)
Framebuffersizeisthetotalamountofsystemmemoryallocatedsolelyfortheonboardgraphicscontroller.MS-DOS,forexample,willuseonlythismemoryfordisplay.Optionsare:Auto(default),32M,64M,128M,256M, 512M, 1G, 2G.
& SATA Mode EnablesordisablesRAIDfortheSATAcontrollersintegratedintheChipsetorconfigurestheSATAcontrollers
to AHCI mode.
�RAID EnablesRAIDfortheSATAcontroller. �AHCI ConfigurestheSATAcontrollerstoAHCImode.AdvancedHostController Interface
(AHCI)isaninterfacespecificationthatallowsthestoragedrivertoenableadvancedSerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& NVMe RAID mode (M2F_32G Connector) AllowsyoutodeterminewhethertouseyourM.2NVMePCIeSSDstoconfigureRAID.(Default:Disabled)
& APU SATA Port Enable (M2F_32G Connector) EnablesordisablestheSATAcontrollerintegratedintheCPU.(Default:Enabled)
& Chipset SATA Port Enable (SATA3 0, 1, 2, 3 Connectors) EnablesordisablestheSATAcontrollerintegratedintheChipset.(Default:Enabled)
& APU SATA Port 0 (M2F_32G Connector) DisplaystheinformationoftheconnectedM.2SATAdevice.TheinformationappearsonlywhenanM.2
SATA device is installed.
& Chipset SATA Port 0/1/2/3 (SATA3 0, 1, 2, 3 Connectors) DisplaystheinformationoftheconnectedSATAdevice(s).
- 31 -
& AC BACK DeterminesthestateofthesystemafterthereturnofpowerfromanACpowerloss.
�Memory The system returns to its last known awake state upon the return of the AC power.
�Always On The system is turned on upon the return of the AC power.
�AlwaysOff ThesystemstaysoffuponthereturnoftheACpower.(Default) & Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
�Disabled Disablesthisfunction.(Default) �Password Set a password with 1~5 characters to turn on the system.
�Keyboard98 PressPOWERbuttonontheWindows98keyboardtoturnonthesystem. �Any key Press any key to turn on the system.
& Power On Password Set the password when Power On By Keyboard is set to Password.
Press<Enter>onthisitemandsetapasswordwithupto5charactersandthenpress<Enter>toaccept.Toturnonthesystem,enterthepasswordandpress<Enter>.
Note:Tocancelthepassword,press<Enter>onthisitem.Whenpromptedforthepassword,press<Enter>again without entering the password to clear the password settings.
& Power On By Mouse Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
�Disabled Disablesthisfunction.(Default) �Move Move the mouse to turn on the system.
�DoubleClick Doubleclickonleftbuttononthemousetoturnonthesystem.
2-7 Power
- 32 -
& ErP DetermineswhethertoletthesystemconsumeleastpowerinS5(shutdown)state.Note:Whenthisitem
is set to Enabled,thefollowingfunctionswillbecomeunavailable:ResumebyAlarm,poweronbymouse,and power on by keyboard.
& Soft-Off by PWR-BTTN ConfiguresthewaytoturnoffthecomputerinMS-DOSmodeusingthepowerbutton.
�Instant-Off Pressthepowerbuttonandthenthesystemwillbeturnedoffinstantly.(Default) �Delay4Sec. Pressandholdthepowerbuttonfor4secondstoturnoff thesystem.If thepower
button is pressed for less than 4 seconds, the system will enter suspend mode.
& Resume by Alarm Determineswhethertopoweronthesystematadesiredtime.(Default:Disabled) If enabled, set the date and time as following:
�Wakeupday:Turnonthesystemataspecifictimeoneachdayoronaspecificdayinamonth. �Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& Wake on LAN EnablesordisablesthewakeonLANfunction.(Default:Enabled)
& High Precision Event Timer EnablesordisablesHighPrecisionEventTimer(HPET)intheoperatingsystem.(Default:Enabled)
& CEC 2019 Ready Allows you to select whether to allow the system to adjust power consumption when it is in shutdown, idle,
orstandbystateinordertocomplywiththeCEC(CaliforniaEnergyCommission)2019Standards.(Default:Disabled)
- 33 -
2-8 Save & Exit
& Save & Exit Setup Press<Enter>onthisitemandselectYes. This saves the changes to the CMOS and exits the BIOS Setup
program. Select Noorpress<Esc>toreturntotheBIOSSetupMainMenu. & Exit Without Saving
Press<Enter>onthisitemandselectYes. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select Noorpress<Esc>toreturntotheBIOSSetupMainMenu. & Load Optimized Defaults
Press<Enter>onthisitemandselectYes to load the optimal BIOS default settings. The BIOS defaults
settingshelpthesystemtooperateinoptimumstate.AlwaysloadtheOptimizeddefaultsafterupdatingthe BIOS or after clearing the CMOS values.
& Boot Override Allowsyoutoselectadevicetobootimmediately.Press<Enter>onthedeviceyouselectandselectYes
toconfirm.Yoursystemwillrestartautomaticallyandbootfromthatdevice. & SaveProfiles
ThisfunctionallowsyoutosavethecurrentBIOSsettingstoaprofile.Youcancreateupto8profilesandsaveasSetupProfile1~SetupProfile8.Press<Enter>tocomplete.OryoucanselectSelect File in
HDD/FDD/USBtosavetheprofiletoyourstoragedevice. & LoadProfiles
If your system becomes unstable and you have loaded the BIOS default settings, you can use this function
to load theBIOSsettings fromaprofilecreatedbefore,without thehasslesof reconfiguring theBIOSsettings.Firstselecttheprofileyouwishtoloadandthenpress<Enter>tocomplete.YoucanselectSelect
File in HDD/FDD/USBtoinputtheprofilepreviouslycreatedfromyourstoragedeviceorloadtheprofileautomatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked
properly(lastknowngoodrecord).
- 34 -
Chapter 3 Appendix
3-1 ConfiguringaRAIDSetRAID Levels
Before you begin, please prepare the following items: • AtleasttwoSATAharddrivesorM.2SATASSDs.(Toensureoptimalperformance,itisrecommendedthatyouusetwoharddriveswithidenticalmodelandcapacity).
• Windows setup disk.
• Motherboard driver disk.
• A USB thumb drive.
ConfiguringtheOnboardSATAControllerA. Installing SATA hard drive(s) in your computerInstalltheharddrives/SSDsintheSATA/M.2connectorsonthemotherboard.Thenconnectthepowerconnectorsfrom your power supply to the hard drives.
B.ConfiguringSATAcontrollermodeinBIOSSetupMakesuretoconfiguretheSATAcontrollermodecorrectlyinsystemBIOSSetup.Steps:
1. Turnonyourcomputerandpress<Delete>toenterBIOSSetupduringthePOST(Power-OnSelf-Test).Under Chipset, ensure APU SATA Port Enable and Chipset SATA Port Enable are enabled. Set SATA
Mode to RAID. Then save the settings and restart your computer.
2. Ifyouwant toconfigureUEFIRAID, followthesteps in"C-1."Toenter the legacyRAIDROM,savethesettingsandexitBIOSSetup.Referto"C-2"formoreinformation.
The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.
The actual BIOS Setup menu options you will see shall depend on the motherboard you have and
the BIOS version.
RAID 0 RAID 1 RAID 10
Minimum Number of HardDrives ≥2 2 4
Array CapacityNumber of hard drives * Sizeofthesmallestdrive Sizeofthesmallestdrive (Numberofharddrives/2)*
SizeofthesmallestdriveFault Tolerance No Yes Yes
C-1.UEFIRAIDConfigurationOnlyWindows1064-bitsupportsUEFIRAIDconfiguration.Steps:
1. In BIOS Setup, go to BIOS and set CSM Support to Disabled. Save the changes and exit BIOS Setup.
2. After the system reboot, enter BIOS Setup again. Then enter the Peripherals\RAIDXpert2ConfigurationUtility sub-menu.
3. On the RAIDXpert2ConfigurationUtilityscreen,press<Enter>on Array Management to enter the Create
Array screen. Then, select a RAID level.RAIDlevelssupportedincludeRAID0(Stripe),RAID1(Mirror),andRAID10(theselectionsavailabledependonthenumberoftheharddrivesbeinginstalled).Next,press<Enter>onSelect Physical Disks to enter the Select Physical Disks screen.
- 35 -
C-2.ConfiguringLegacyRAIDROMEnterthelegacyRAIDBIOSsetuputilitytoconfigureaRAIDarray.SkipthisstepandproceedwiththeinstallationofWindowsoperatingsystemforanon-RAIDconfiguration.Steps:
1. After the POST memory test begins and before the operating system boot begins, look for a message which
says"Press<Ctrl-F>toenterRAIDOptionROMUtility".Press<Ctrl>+<R>toentertheRAIDBIOSsetuputility.2. Tocreateanewarray,press<Enter>ontheCreateArrayoption.3. The selection bar will move to the Disks section on the right of the screen. Select the hard drives to be
includedintheRAIDarray.Usetheupordownarrowkeytoselectaharddriveandpress<Insert>.Theselectedharddrivewillbeshowningreen.Tousealloftheharddrives,simplypress<A>toselectall.Thenpress<Enter>andtheselectionbarwillmovetotheUser Input section on the left bottom of the screen.
4. First,selectaRAIDmodeandpress<Enter>.Theselectionsavailabledependonthenumberoftheharddrivesbeinginstalled.Thenfollowtheon-screeninstructionstospecifythearraysize.YoucanselectAll available
spacetousethemaximumsizeallowedorusetheupordownarrowkeytoadjustthesizeandpress<Enter>.5. Selectacachingmode.OptionsincludeRead/Write,ReadOnly,andNone.Thenpress<Enter>toproceed.6. Finally,amessagewhichsays"ConfirmCreationofArray"willappear.Press<C>toconfirmor<Esc>to
return to the previous screen.
7. Whencompleted,youwillseethenewarrayonthemainscreen.ToexittheRAIDBIOSutility,press<Esc>andthenpress<C>toconfirm.
Installing the SATA RAID/AHCI Driver and Operating SystemWith the correct BIOS settings, you are ready to install the operating system.
Installing the Operating SystemAssomeoperatingsystemsalreadyincludeSATARAID/AHCIdriver,youdonotneedtoinstallseparateRAID/AHCI driver during the Windows installation process. After the operating system is installed, we recommend
thatyouinstallallrequireddriversfromthemotherboarddriverdiskusing"XpressInstall"toensuresystemperformance and compatibility. If the operating system to be installed requires that you provide additional SATA
RAID/AHCIdriverduringtheOSinstallationprocess,pleaserefertothestepsbelow:1. Copy the Hw10 folder under the \Boot folder in the driver disk to your USB thumb drive.
2. Boot from the Windows setup disk and perform standard OS installation steps. When the screen requesting
you to load the driver appears, select Browse.
3. Insert the USB thumb drive and then browse to the location of the driver. The location of the driver is as
follows:
\Hw10\RAID\x644. Select AMD-RAID Bottom DevicefirstandclickNext to load the driver. Then select AMD-RAID Controller
and click Next to load the driver. Finally, continue the OS installation.
PleasevisitGIGABYTE'swebsitefordetailsonconfiguringaRAIDarray.
4. On the Select Physical Disksscreen,selecttheharddrivestobeincludedintheRAIDarrayandsetthemto Enabled. Next, use the down arrow key to move to Apply Changesandpress<Enter>.Thenreturntothe previous screen and set the Array Size, Array Size Unit, Read Cache Policy and Write Cache Policy.
5. After setting the capacity, move to Create Arrayandpress<Enter>tobegin.6. After completing, you'll be brought back to the Array Management screen. Under Manage Array Properties
youcanseethenewRAIDvolumeandinformationonRAIDlevel,arrayname,arraycapacity,etc.
- 36 -
Please visit GIGABYTE's website for
more software information.
• Before installing the drivers, first install the operating system. (The following instructions useWindows10astheexampleoperatingsystem.)
• After installing the operating system, insert the motherboard driver disk into your optical drive. Click
onthemessage"Taptochoosewhathappenswiththisdisc"onthetop-rightcornerofthescreenandselect"RunRun.exe."(OrgotoMyComputer,double-clicktheopticaldriveandexecutetheRun.exeprogram.)
3-2 Drivers Installation
"XpressInstall"willautomaticallyscanyoursystemandthenlistallofthedriversthatarerecommendedtoinstall. You can click the Xpress Installbuttonand"XpressInstall"willinstallalloftheselecteddrivers.Orclickthe arrow icon to individually install the drivers you need.
Please visit GIGABYTE's website for
more troubleshooting information.
- 37 -
Regulatory Statements
Regulatory NoticesThis document must not be copied without our written permission, and the contents there of must not be imparted to a
thirdpartynorbeusedforanyunauthorizedpurpose.Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the
time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note
that the information in this document is subject to change without notice and should not be construed as a commitment
by GIGABYTE.
Our Commitment to Preserving the EnvironmentInadditiontohigh-efficiencyperformance,allGIGABYTEmotherboardsfulfillEuropeanUnionregulationsforRoHS(RestrictionofCertainHazardousSubstancesinElectricalandElectronicEquipment)andWEEE(WasteElectricalandElectronicEquipment)environmentaldirectives,aswellasmostmajorworldwidesafetyrequirements.Topreventreleasesofharmfulsubstancesintotheenvironmentandtomaximizetheuseofournaturalresources,GIGABYTEprovidesthefollowinginformationonhowyoucanresponsiblyrecycleorreusemostofthematerialsinyour"endoflife"product.
Restriction of Hazardous Substances (RoHS) Directive StatementGIGABYTEproductshavenotintendedtoaddandsafefromhazardoussubstances(Cd,Pb,Hg,Cr+6,PBDEandPBB).ThepartsandcomponentshavebeencarefullyselectedtomeetRoHSrequirement.Moreover,weatGIGABYTEare continuing our efforts to develop products that do not use internationally banned toxic chemicals.
Waste Electrical & Electronic Equipment (WEEE) Directive StatementGIGABYTEwill fulfill thenational lawsasinterpretedfromthe2002/96/ECWEEE(WasteElectricalandElectronicEquipment)directive.TheWEEEDirectivespecifiesthetreatment,collection,recyclinganddisposalofelectricandelectronicdevicesandtheircomponents.UndertheDirective,usedequipmentmustbemarked,collectedseparately,and disposed of properly.
WEEE Symbol StatementThe symbol shown below is on the product or on its packaging, which indicates that this product must
not be disposed of with other waste. Instead, the device should be taken to the waste collection centers
for activation of the treatment, collection, recycling and disposal procedure. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more information about where you
candropoffyourwasteequipmentforrecycling,pleasecontactyourlocalgovernmentoffice,yourhouseholdwastedisposal service or where you purchased the product for details of environmentally safe recycling.
� Whenyourelectricalorelectronicequipmentisnolongerusefultoyou,"takeitback"toyourlocalorregionalwastecollection administration for recycling.
� Ifyouneedfurtherassistanceinrecycling,reusinginyour"endoflife"product,youmaycontactusattheCustomerCare number listed in your product's user's manual and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving
featuresofthisproduct(whereapplicable),recyclingtheinnerandouterpackaging(includingshippingcontainers)thisproduct was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the
amountofnaturalresourcesneededtoproduceelectricalandelectronicequipment,minimizetheuseoflandfillsforthedisposalof"endoflife"products,andgenerallyimproveourqualityoflifebyensuringthatpotentiallyhazardoussubstances are not released into the environment and are disposed of properly.
Battery InformationEuropeanUnion—DisposalandrecyclinginformationGIGABYTERecyclingProgram(availableinsomeregions)
This symbol indicates that this product and/or battery should not be disposed of with household waste. You must use
the public collection system to return, recycle, or treat them in compliance with the local regulations.
- 38 -
FCC Notice (U.S.A. Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencein a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
� Reorientorrelocatethereceivingantenna. � Increase the separation between the equipment and receiver.
� Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
� Consult a dealer or experienced TV/radio technician for help.
Canada, Industry Canada (IC) Notices / Canada, avis d'Industry Canada (IC)
� ThisClassBdigitalapparatuscomplieswithCanadianICES-003andRSS-210. � Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)this
device must accept any interference, including interference that may cause undesired operation of the device.
� CetappareilnumériquedeclasseBestconformeauxnormescanadiennesICES-003etRSS-210. � Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causerd'interférenceet(2)cetappareildoitacceptertouteinterférence,notammentlesinterférencesquipeuventaffecter son fonctionnement.
- 39 -
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD.
Address:No.6,BaoqiangRd.,XindianDist.,NewTaipeiCity231,TaiwanTEL: +886-2-8912-4000, FAX: +886-2-8912-4005
Tech.andNon-Tech.Support(Sales/Marketing):https://esupport.gigabyte.comWEBaddress(English):https://www.gigabyte.comWEBaddress(Chinese):https://www.gigabyte.com/tw
• GIGABYTE eSupport
Tosubmitatechnicalornon-technical(Sales/Marketing)question,pleaselinkto:https://esupport.gigabyte.com
- 40 -
