GAC2500 Firmware Release Note - Firmware-...

GRANDSTREAM NETWORKS GAC2500 Release Note Page 1

GAC2500 Firmware Release Note

Table of Content

FIRMWARE VERSION 1.0.3.5 ................................................................... 3

PRODUCT NAME.................................................................................................................................. 3

DATE ..................................................................................................................................................... 3

CHANGES SINCE FIRMWARE VERSION 1.0.1.44 ............................................................................. 3

ENHANCEMENT ............................................................................................................................ 3

BUG FIX ......................................................................................................................................... 7

FIRMWARE VERSION 1.0.1.44 ............................................................... 10

PRODUCT NAME................................................................................................................................ 10

DATE ................................................................................................................................................... 10

CHANGES SINCE FIRMWARE VERSION 1.0.1.40 ........................................................................... 10

ENHANCEMENT .......................................................................................................................... 10

BUG FIX ....................................................................................................................................... 10


PRODUCT NAME................................................................................................................................ 11

DATE ................................................................................................................................................... 11


ENHANCEMENT .......................................................................................................................... 11

BUG FIX ....................................................................................................................................... 11


PRODUCT NAME................................................................................................................................ 12

DATE ................................................................................................................................................... 12


ENHANCEMENT .......................................................................................................................... 12

BUG FIX ....................................................................................................................................... 12


PRODUCT NAME................................................................................................................................ 14

DATE ................................................................................................................................................... 14


ENHANCEMENT .......................................................................................................................... 14

BUG FIX ....................................................................................................................................... 14



PRODUCT NAME................................................................................................................................ 16

DATE ................................................................................................................................................... 16


ENHANCEMENT .......................................................................................................................... 16

BUG FIX ....................................................................................................................................... 16


FIRMWARE VERSION 1.0.3.5

PRODUCT NAME

GAC2500

DATE

11/16/2016

CHANGES SINCE FIRMWARE VERSION 1.0.1.44

ENHANCEMENT

Prompt tips when GAC2500 is connected to wrong GVC USB port.

Supported IPv6.

Supported setting Wi-Fi from web UI -> Maintenance.

Added support for DHCP Option 132 & 133 tunneled through DHCP Option 43.

Added voice mode setting in Settings -> Sound -> Call settings. Users can set 6 different voice mode.

Added “Medium room & Rich voice” and “ Medium Room & Clear Voice” option in web UI -> Advanced

-> Call Features -> Voice Mode.

Supports using dial pad to dial out call in Skype for business app.

Improved audio process performance.

When removing app from GUI Config tool, the GAC2500 will delete it including background service

rather than hiding the app in background only.

Added call detail in calling interface. When in a call, simply choose “More” and “Call Details”.

Added support to disable SSH without reboot.

Added some missing tooltips.

On web UI MPK settings, Multicast Paging does not need to set the account.

Improved the web UI design on IE browser.

Added input inspection of multicast paging on web UI.

Removed “Hide Local Call History” under web UI -> Advanced -> General Settings.

Added contact categories when creating a new conference in web UI -> Contacts -> Schedule -> Add

member icon.

Changed web UI -> Contacts -> LDAP -> Max Hits valid range to 0 - 4000.

Changed LDAP search timeout unit to second.

DUT in a conference with an outgoing call will add all incoming call to conference.

Changed internal storage icon.

Added Virtual Group feature.

In web UI, go to different Account -> Call Settings: set the account to the same group. The phone can

answer any incoming calls to each account in groups. If user makes an outbound call, the phone system

will use the lowest ID account by default.


Added more voice mode in web UI -> Advanced -> Call Features -> Voice Mode: “Medium room &

Rich voice”, “Medium Room & Clear Voice”, “Small room & Denoise”, and “Small & Enhanced

denoise”.

Modify phone type and Email type to English only while importing/exporting Contacts xml file on

Universal Phone Editor.

Added “Hide Vocoder” in web UI -> Account -> Codec Settings. When set to “Yes”, the codec

information in an active call will be hidden.

Added more operation on LCD for GVC320x when GAC2500 is connected to GVC320x via USB.

Added count of calls for call history on LCD.

Improved DUT’s behavior when using option “Use # as Dial Key” to dial out:

1. If input area has a number, DUT will check the account call settings to see if “Use # as Dial Key” is

enabled or not;

2. If input area has no number, DUT will use ‘#’ as redial directly.

Changed the layout of creating new group on web UI -> Contacts page.

Synchronized the mute icon of minimized call interface on web UI.

Improved Broadcast contact search works like local contacts to auto display.

Trimmed the multicast name displaying on web talking interface.

Allowed DUT to display a widget shape even there is no account registered.

Added support for Google Calendar conference schedule features.

Open “Schedule” app, the users will see the “refresh” icon which is used for synchronizing the Google

calendar event. The “g” icon indicates Google account settings and instruction about Google Calendar

settings to sync the info to GAC2500.

Updated tooltip for “Complete upgrade” and “Unregister before new registration”.

Shortened reminding tone for incoming intercom call.

Updated description under Contacts -> LDAP page.


Added Core dump feature under web UI -> Maintenance -> Troubleshooting -> Debug page.

- Enable Core Dump Generation:

Enable device to store core dump file when error occurs. Default is no. P-value is 29611.

- Core Dump List:

Choose an existing core dump file to delete.

- View Core Dump:

To view all the core dump files. User can download them for troubleshooting.

Added “Disable web GUI” in web UI -> Maintenance -> Security settings. P-value is 29605. Default

value is 0.

Added P-value 29606 for fixed slave mode in web UI -> Advanced settings -> General settings ->

Fixed Slave Mode. 0 - No, 1 - Yes.

Added “User Authority Management” for admin under Web UI ->Maintenance->Security Settings. If

checked, admin can choose accessible app via “Configure Permission”.


Added support for Bluetooth A2DP sink role, which means GAC2500 can connect to GVC320x and

mobile devices via Bluetooth to play music files.

Added support for special control character 'T' in dialplan. “T” means dial delay. This is used with “No

key entry timeout (s)”.

For example, if the dialplan is set to {8001T}, when the user opens Phone app and dials 8001, the

phone would not call out immediately, but will wait for the No key entry timeout to dial out.

Added “Intercome barging” in Web UI -> Account -> Call settings.

When "Intercom Barging" is enabled, if the current active call is an intercom call, the incoming

intercom call will be automatically rejected; if the current active call is not an intercom call, the current

active call will be put on hold and the incoming intercom call will be automatically answered. When

"Intercom Barging" is disabled, a prompt will show to indicate the incoming intercom call without

interrupting the current active call. The default setting is disabled.

Added support for dialing multiple members in conf room during a call on web UI.

1. DUT is in a call. Go to web UI -> Call. Click “Add to conf” to start a conference, shown as below.

2. Click “+” to add members. For each member to add, input the number, and check the checkbox in

the front of the number to add a member. In below example, the conference will add 8005 and

8002.


3. The “Add” button at bottom right is to call these members.

Packed new CFG file for new hardware production.

BUG FIX

Fixed weather app does not work issue.

Fixed lock screen pattern error notice position on LCD.

Fixed Contacts app sort result by first name and last name are inverted.

Fixed DUT displays a number on CallHistory and web UI Call History after the number is added to

Blacklist.

Fixed DUT does not have voicemail ringtone when switch to an account with unread voicemail.

Fixed the incoming call notice covers the attended transfer option popup.

Fixed DUT does not show call detail when there are call failed or calling lines in conference.

Fixed DUT gives wrong notice “transfer failed” when press Call Transfer MPK key in idle state.

Fixed DUT cancels speed dial via active account and gives wrong notice “Account is not available”

while there is active accounts.

Fixed slave GAC does not quit cascade interface after unplugging the RJ48 cable when DUT connects

GVC with USB cable.

Fixed slave GAC remains USB connection interface after disconnects PC and master GAC.

Fixed DUT Click2Dial does not work from web page on LCD.

Fixed DUT LCD shows multiple incoming calls when connecting GVC that has an incoming call.

Fixed DUT web UI can run JavaScript code.

Fixed DUT Upload Device Configuration from web UI does not take effect on some account

parameters.

Fixed DUT LCD displays pattern screen lock after DUT upgrades via USB.


Fixed DUT LCD may remain cascade interface after disconnected PC via USB cable.

Fixed DUT does not display name and number of a contact on web UI when the contact calls

anonymously.

Fixed DUT does not lock call mode after entering the number.

Fixed DUT displays a non-contact number twice in calling interface on web UI.

Fixed DUT creates a new contact from Callhistory puts the number in name area by default.

Fixed DUT automatically add the incoming call into conference and answers it when DUT is trying to

call 2 numbers from web UI.

Fixed DUT is having an SRTP call, but no lock icon is displayed on web.

Fixed DUT search icon disappears after select all and unselect all in File Manager.

Fixed DUT tooltip display issue of “Voice Frames Per TX” on web UI.

Fixed DUT “RTCP Destination” allows address without port number.

Fixed DUT speed dial via active account under MPK does not work.

Fixed DUT does not show no schedule reminder after press “Screen off” from status bar

Fixed DUT schedules a conference from web UI but it would not sync to LCD dialpad.

Fixed DUT adding an MPK Multicast Paging to conference does not display “multicast” in member’s

name.

Fixed DUT uploading config file would not take effect on some of settings.

Fixed DUT minimizes a conference on web UI would overlap the last record of call history.

Fixed DUT cannot display existing line in web UI transfer interface.

Fixed some LLDP issue.

Fixed DUT web UI -> Account -> SIP Settings -> OPTIONS Keep Alive Interval (s) has no prompt

when input number is invalid.

Fixed when DUT adds a multicast paging to a conference, there is no “multicast” after the name on

web UI display like that on LCD.

Fixed DUT does not display conference history in auto match when dialing a number.

Fixed DUT can input duplicate number on LCD and dial out.

Fixed DUT incoming call tab on LCD is not in order.

Fixed DUT can create more than one group calls with the same name. Different names are required.

Fixed DUT asks for password after selecting an export directory for a recording in Recorder app.

Fixed DUT prompts “Launcher3 has stopped” after delete the wallpaper which is being used.

Fixed DUT Phone app cannot hold ‘0’ key to dial ‘+’.

Fixed DUT creating a new contact from call history does not put the name in name field.

Fixed DUT only intercepts the first number of a contact if the contact has more than one number.

Fixed DUT editing a contact on LCD prompts “Custom label name” after the contact is created on web

UI with only email.

Fixed DUT does not turn off callforward in some situation.

Fixed DUT does not display full call history for Bluetooth account on LCD.

Fixed DUT would ring account 2 when it initiates an intercom call which includes itself.

Fixed DUT can't establish any call after it sends SUBSCRIBE REGISTER without response.


Fixed DUT enables Conference server and set Auto Mute on Entry to “Auto mute on incoming call”

from web UI -> Advanced Settings -> Call features. DUT answers multiple incoming calls would auto

hold one line and cannot unhold. P-value is 29602.

Fixed DUT sends register to secondary outbound proxy without authentication.

Fixed Option 66 does not take effect when download via http/https.

Fixed DUT removes CA certificate but the related account status is not updated.

Fixed $ symbol is not accepted in the SIP User ID Parameter.

Fixed dialplan takes effect on emergency call when DUT has screen lock.

Fixed DUT message reply cannot use ‘\n’ on web UI.

Fixed Missed call interface won't display name and display name of the searched form LDAP.

Fixed some tooltips that do not match default settings.

Fixed DUT gets silenced when connects and disconnects iPhone 6S.

Fixed DUT shows its own DND icon after getting controlled by GVC.



PRODUCT NAME

GAC2500

DATE

07/12/2016


ENHANCEMENT

(None)

BUG FIX

Fixed Weather app does not update issue.

Fixed DUT still asks for username and password even the address does not need validation.

Fixed DUT LCD displays pattern screen lock after DUT upgrades via USB.

Fixed DUT LCD may remain cascade interface after disconnected PC via USB cable.

Fixed some PMU issues.



PRODUCT NAME

GAC2500

DATE

05/18/2016


ENHANCEMENT

Update rescue, speed up upgrade speed.

BUG FIX

Fixed DUT selects a custom ringtone which is stored in USB from LCD for a specific contact, does not

change back to system ringtone when the USB is disconnected.

Fixed DUT does not give prompt when dialing number does not match dial plan on web UI.

Fixed DUT repeatedly plays notification tone after upgrading.

Fixed DUT cannot end Skype call.

Fixed DUT displays wrong information when using feature code *17.

Fixed DUT displays mute/block for multicast lines on web UI which is different from LCD.

Fixed DUT download status disappears when sliding right twice when downloading apps in GS

Markets.

Added Guest Login option under Advanced Settings -> General Settings must reboot to take effect.

Fixed DUT holds a participant in a conference, then mutes itself but does not change mute status.

Fixed DUT enters MPK and then cannot return to talking interface after locking screen.

Fixed DUT cannot update immediately after contact number is changed.

Fixed DUT dialplan does not work on matching specific numbers.

Hided 'Virtual Account Group' setting since not fulfill at current time.

Removed IPv6 setting since not fulfill at this version.

Fixed DUT does not send request to FW server after receiving server address carried in option 66.

Fixed sometimes audio echo issue.



PRODUCT NAME

GAC2500

DATE

03/28/2016


ENHANCEMENT

Updated tool tips style in web UI

Updated layout of MPK app and MPK widget on LCD

Added a quick access softkey to MPK (Hotkeys) app below the SIP accounts in dial pad

Moved some apps into Tool Folder directory by default

Added Contacts access softkey in MPK app

Added Icon on notification bar when PNP is enabled

Added Option to add a contact to MPK speed dial in Contacts app. Here is the step to use it:

1. Open Contacts app, select a contact.

2. Select a number in the contact.

3. On the upper right, press “Send” icon and check “Send to Speed Dial (Hotkey)”.

4. In MPK app, there would be an icon created for the contact speed dial.

Updated the videos in Tips app according to new firmware’s UI and features

Added Group Call feature in MPK. Here is the step to use it:

1. On LCD, open MPK app and enter the adding MPK page by tapping the icon on the upper right.

2. Select “Group Call” in the key mode.

3. Fill in the Group name, and check “Mute all” if you want to have participants muted when entering the

conference call.

4. In the account list below, users can add up to 6 accounts by filling the numbers, names and selecting

a registered account;

5. Users can also edit this MPK in web UI->Advanced->MPK LCD Settings->Key Mode: Group Call.

BUG FIX

Fixed DUT does not override the ACS URL under TR-069 if there is one in DHCP Option 53

Fixed DUT does not display transferee but transferer info after transferer performs attended transfer

Fixed DUT set “Mute All” or “Block All” in a conference but does not take effect on newly added

attendees

Fixed DUT does not have prompt when attended transferring to a user while the user is calling DUT

Fixed DUT can’t be provisioned successfully for the first time after factory reset


Fixed DUT cannot search Wi-Fi when set to some country code

Fixed DUT web UI will display single call interface first when calling multiple numbers

Fixed LCD lock icon would disappear after resuming a SRTP call on hold

Fixed USB cascade mode would make DUT display Chinese incorrectly

Fixed DUT fails to transfer a number with filtered characters from web UI

Fixed DUT password input from locked screen overlaps notification bar

Fixed The renamed paired Bluetooth device on DUT had the name changed back automatically after

DUT searches for devices again

Fixed DUT “Show account name only" does not apply on some accounts settings

Fixed Mute All/Block All buttons do not work when some member is on hold in a conference

Fixed DUT does not send LLDP package after power cycle

Fixed DUT converts a folder into a file before deleting it

Fixed Lync talking via BT headset does not take effect



PRODUCT NAME

GAC2500

DATE

03/04/2016


ENHANCEMENT

Added option to hold individual participant in conference call

1. During a conference call, tap the participant icon to display 5 softkeys.

2. Select the middle softkey to hold the participant.

3. Tap on the participant icon and then select the left softkey to resume.

Added ability to download audio recording from web UI

1. During a call, tap on “Start recording” to start recording the call, then tap on “Stop recording” to

stop recording. Or create a recording via Recorder app on GAC2500.

2. Go to GAC2500 web UI->Maintenance->Recording page to download the file.

Improved provisioning when GAC2500 is provisioned with Broadsoft server

BUG FIX

Fixed DUT should not be allowed to schedule a conference if no account is registered

Fixed Firmware error message in notification bar is not fully displayed

Fixed The number selected from call history cannot be added to blacklist

Fixed Error pops up when quickly tapping on “Enable password” in Recorder app

Fixed DUT fails in downloading recordings that was renamed from wen UI

Fixed Synchronization issues on slave DUT with master DUT

Fixed Slave DUT can input feature code bypassing master DUT

Fixed Slave DUT displays white screen in calling when master DUT is connected to GVC via Bluetooth

Fixed DUT calling interface does not display name on status bar if the number is from LDAP

Fixed DUT does not display conference interface in multicast paging when Conference server is

enabled

Fixed DUT goes to different page after ending an incoming call during a conference

Fixed DUT account registered on UCM has a wrong option under More in calling page when answering

an incoming call during a conference

Disabled mute icon when the conference is hold

Fixed DUT displays wrong member info in conference after failure to transfer it to others

Fixed DUT does not display “unhold” after pressing “hold” in a conference with unknown number


Fixed Some cascade mode asynchrony issues

Fixed DUT backup restore process freezes on LCD during a call)

Fixed DUT does not disable “More” option in calling page when receiving remote ringtone

Fixed DUT calls crashes when pressing home key in an attended transfer call



PRODUCT NAME

GAC2500

DATE

01/15/2015


ENHANCEMENT

Added option “Show account name only” in SIP account settings

Added option “Tel URI” in SIP account settings

Improved LCD display when the user name is too long

Improved web UI display for certain icons and options

Added feature to not allow new call when the phone is transferring a call

Added option to enable navigation bar arrow under LCD menu->Settings ->Display

Added option to select large room or small room under web UI->Advanced->Call features for the user

to achieve better audio effect in different room sizes

Added recording management page in web UI

Added progress dialog display on LCD when switching to Bluetooth mode

Added ability to add caller to conference when the phone is ringing

Cleared missed call notification in idle screen after user enters the Call History

Moved “Wireless & Network settings” under “Advanced settings” in LCD menu->Settings

Moved Bluetooth settings from “Wireless & networks settings” to “Settings” in LCD menu->Settings

BUG FIX

Fixed Music will be paused if connecting BT headset when playing music

Fixed DUT should not allow deleting soft key when AUX3.5mm is used

Fixed Registered account disappears on the widget after cancelling reboot on LCD

Fixed Hands-free dialing delay for Bluetooth account

Fixed Abnormal LCD display after ending the call

Fixed DUT does not display contact name after call transfer is rejected

Fixed Error is prompted in MPK call transfer process

Fixed DUT display is incorrect after using MPK multicasting in a call and then ending it

Fixed DUT can manually start the scheduled conference when there is already a conference in

progress

Fixed DUT cannot obtain customized file

Fixed The conference reminder shows up after the conference begins


Fixed Audio from DUT has delay after resuming the call on hold

Fixed DUT needs re-enter the menu to see text to speech example change

Fixed Web UI option “Replace by Name” doesn’t take effect when downloading contacts

Fixed DUT will automatically change language after connecting to Wi-Fi by manually entering SSID

and password

Fixed DUT does not have ringback tone after transferring the call using attended transferred and the

remote 3rd party is ringing

Fixed some LDAP configuration issues

Fixed some LCD display issues during conference

Fixed LCD and web UI call status is not synchronized during operations such as adding contacts,

recording, deleting participant during conference and etc

Fixed DUT can add multicast listening without filling in IP address

Fixed In web UI->Account->Call settings, Call Forward time interval format error prompt is not specific

Fixed After DUT uses 3.5mm AUX to connect to a cellphone, the cellphone acts as a member in the

conference but it can be deleted

Fixed DUT connected with a Bluetooth headset has a delay when dialing number

Fixed DUT will change hardware version when recovering a backup obtained from a different

hardware version device

Date post:	15-Apr-2018
Category:	Documents
Upload:	duonglien
View:	241 times
Download:	2 times

GAC2500 Firmware Release Note - Firmware-...

Documents