Date post: | 14-Jul-2018 |
Category: |
Documents |
Upload: | phamkhuong |
View: | 216 times |
Download: | 0 times |
GALMON PLAIN FRAME TOWERMax. Safe Working Load (Tower)750kg - 1,650 lbs
Max. Safe Working Load (Platform)250kg - 550 lbs
GALMON LADDER FRAME TOWER
Lengths2.0m (6’)2.5m (8’)3.0m (10’)
Double Width1.35m (4’4”)
Single Width0.715m (2’4”)
Lengths2.0m (6’)2.5m (8’)3.0m (10’)
Double Width1.35m (4’4”)
Single Width0.715m (2’4”)
Base Double Width3.9m
Base Single Width3.6m
Base
2.0m
= 4
.5m
Bas
e2.
5m =
5.0
m B
ase
3.0m
= 5
.5m
Bas
e
Single Width665mmDouble Width1275mm
5 Ru
ng F
ram
e2.
320m
(7’7
”)4
Rung
Fra
me
1.85
6m (6
’1”)
3 Ru
ng F
ram
e1.
392m
(4’7
”)
FEATURES
• 6ins(150mm)and8ins(200mm)castors• 4ins(100mm)and6ins(150mm)self-aligningbaseplates
• Rolledsquarethreadforincreasedstrengthanddurability
• Fullnutensuresuniformloadingdowntheleg• Legheldinframebycarbonspringsteelretainingspring
• Toughpolyurethanecastorsdonotmarkfloorsandareoilandchemicalresistant
Castors / Adjustable Legs / Baseplates
Plain Frame
Ladder Frame
70º Clip-On Ladder
Self Locking Braces
Platform Hook / Wind Lock Clip
• Framesaredesignedtobeusedasuppers,lowersandguardrailswithoutmodification
• Seamweldedtubeof1.64mmthickness,provideshighstrength,closetolerancecontrol
• Castaluminiumsplinedspigotdesignedforsmoothoperationand“jam-free”fit
• Weldedconstructionforlonglifeandeasyrepair
• TheLadderFrameconstructioncombinesincreasedstrengthanddurabilitywiththesimplicityofaLadder
• TheLadderpositionedwithintheframeprovidesfoolproof,safe,speedyaccesstotheworkingplatform,andincorporatesribbedtubeforimprovedgripanduserconfidence
• ConstructedaccordingtoEN131(European/BritishStandardforLadderDesign,ConstructionandTesting)
• Laddersaremadeofruggedsectionsandsecuredtoframebytwolockingsupportarms
• 5,7and9-stepladderavailable
• Selflockingbracehookswithergonomicallydesignedreleaselatch
• Castingsaremanufacturedfromhighstrengthheattreatedaluminiumalloy
• Seamweldedforreliabilityandrepairability
• Extrawideextrudedhookforstrengthandsecurity
• Boltedconstructionforeaseofreplacement
• Diamondpattern,non-slipphenolfilmplywood
• “Windlock”cliptopreventtippinginwindyconditions,butallowsplatformmovementtoresistoverturning
Corner Strut On Frames
Colour Coded Diagonal and Horizontal beams
Trapdoor PlatformTool Tray
Rubber Swivelling BaseOn Stabilizers
Solid Cast Splined SpigotsOn Frames / Couplers
• Ribbedtubeonhorizontalrungsfornon-slipuse
• Cornerstrutsforadditionalrigidity,preventslozenging
• Selfclosingtoprevenaccidents
• Aluminiumhingesforlonglifeandeasyreplacement
• Trapdoorlatchtolocktrapdoorsafelyinplacewhenclosedorintransit
• Largeopeningforeasyaccess
• LightToolTrayattachmenton1.35mwidthofGalmonAluminiumTower
• Forsmall,lighttoolsupto18kg(39lbs.)evenlydistributed
Size: 1.325m(L)x0.195m(W)x0.95m(Depth) 52”(L)x7.68”(W)x37.4”(Depth)
Weight: 4.0kg(8.8lbs.)
• Fullrangeofstandardandjumbostabilizers(withorwithouttelescopicadjustment)
• Allwithrubberswivellingbasefootgivingfirm,securecontactwithground
• Solidcastsplinedspigot,profileenableseasyfitand“jam-free”operation
• 2ins(50mm)dropforged,zinccouplersfornon-standardapplications
• Allbracesarecolourcodedforeasyidentification
Diagonals: White 2.0m length: Red
Horizontals: Black 2.5m length: Yellow
3.0m length: Blue
GALMON TOWER COMPONENTS
5 Rung D/W FrameRD5 10.332440mm 0/All
4 Rung S/W FrameRS4 6.811976mm 0/All
3 Rung D/WLadder FrameFDL3 8.811487mm 0/All
3 Rung S/W FrameRS3 5.461512mm 0/All
5 Rung S/WLadder FrameFSL5 11.382440mm 0/All
4 Rung S/WLadder FrameFSL4 9.361976mm 0/All
850mm 0/All
665mm CTR
3 Rung S/WLadder FrameFSL3 7.23 1512mm 0/All
5 Rung D/WLadder FrameFDL5 13.732415mm 0/All
4 Rung D/WLadder FrameFDL4 11.391951mm 0/All
4 Rung D/W FrameRD4 8.561976mm 0/All
3 Rung D/W FrameRD3 6.771512mm 0/All
5 Rung S/W FrameRS5 8.052440mm 0/All
PP3 20.29b: 2900mm Hook CtrsPP2 16.88b: 2400mm Hook CtrsPP1 13.22b: 1900mm Hook Ctrs
Toeboard Assembly Double WidthTD3 16.0TD2 14.0TD1 12.0
Toeboard Assembly Single WidthTS3 13.5TS2 11.5TS1 9.5
TP3 21.83b: 2900mm Hook CtrsTP2 17.38b: 2400mm Hook CtrsTP1 13.48b: 1900mm Hook Ctrs
DB1 2.06 2015mm Ctr
HB1 1.93 1900mm Ctr
Castor / BaseplatesCT6 3.65150mm Dia WHEELCT8 4.34200mm Dia WHEELBPS 1.0SWIVEL BASE PLATE100mm x 100mm150mm x 150mm
ASS 2.0900mm
6 Rung Walk Through WT6 13.812904mm
5 Rung Portal FramePF5 8.02440mm
GP3 12.03b: 2900mm CtrGP2 10.93b: 2400mm CtrGP1 9.83b: 1900mm Ctr
400mm
Telescopic StabilizersST3 4.0a: 2475mm + 1050mmb: 2050mm + 2800mmST4 8.0c: 5000mm + 500mmd: 2060mm + 315mm
StabilizersST1 4.02a: 2475mmb: 2050mmST2 7.5c: 5000mmd: 2760mm
OPTIONAL ACCESSORY
Toeboard170mm
20mm
Toeboard170mm
20mm
Component name Weight (kg)
1275mm
665mm
464mm
232mm
Tube50.8mm1.6mm
a: 610mm
a: 610mm
b
b
Plain Platform
Trapdoor Platform
D/W Guar Rail FrameGRD 3.87
S/W Guar Rail FrameGRS 3.09
1275mm CTR
850mm 0/All
Diagonal Braces
Horizontal Braces
DB3 2.65 2945mm Ctr
DB2 2.35 2479mm Ctr
HB3 2.55 2900mm Ctr
HB2 2.24 2400mm Ctr
a
a
b
b
d
d
c
c
2.2m
1.86m
4.68m
2.15
8m
817mm
4.37m
Adjustable Leg Assembly
ALS 1.5650mm
290mm600mm
BB3 8.63
BB2 7.39
BPS 6.54
3125mm
2400mm
1900mm
Bridge Beams
464mm
70˚ Clip-on Ladder
LA9
7.0
6 22
50m
m
LA7
6.0
5 24
00m
m
LA5
5.98 11
50m
m
Goal Post Frame
a: 1850mm Ctr
These new units are another
solution for working at low level
Stepfold Podium 1
Providing platform levels of 1m &
1.2m (Working Heights, 3m & 3.2m)
Stepfold Podium 2
Providing platform levels of 1.2m &
1.45m (Working Heights, 3.2m &
3.45m)
Using a specially designed telescopic
guardrail frame, the user is able to
access the step platforms to gain
easy access to and from the working
platform. Stabilizers
are provided for extra stability.
Stepfold Podium 1 will fit through
standard doorways. This unit has a
folding mechanism that allows it to
fold flat, great for transportation and
storage.
Anti Surf Option...
This unit is available as a mobile
unit complete with 4 Castors, or with
the option of 2 plates as shown to
prevent “surfing”
Stabilizers Included with
every unit
Podium 1
STEP FOLD PODIUMS 1 & 2
Manufactured To a TUV Certified ISO 9001:2008 Quality Control System
Fully Approved & Certified to the PAS250 Standard for LLWP (Low Level Work Platforms)
Folds Flat
Step Fold
Podiums
PAS250
CERTIFICATED
Stepfold Podium 1 Stepfold Podium 2
Platform Height 1m & 1.2m 1.2m & 1.45m
Safe Working Load 150Kg 150Kg
Dimensions 0.6m x 0.65m 0.6m x 0.65m
The Step Fold Podiums
Assembly Instructions Ensure all parts are present and are not damaged before
assembling
Kit List – Podium 1 / 1m & 1.2m 4 x K548 - 5” Castors / SFBP - Base Plates
1 x SFP1 – 1m Podium Base Unit
2 x Stabilizers (SFST/L - Left & SFST/R -Right)
2 x SFGB – Guardrail Horizontal Braces `
2 x SFHB - Ribbed Brace
2 x SFSP - Step Platforms
1 x SFPP - Main Platform
Kit List – Podium 2 / 1.2m & 1.45m 4 x K548 - 5” Castors / SFBP - Base Plates
1 x SFP2 -1.2m Podium Base Unit
2 x Stabilizers (SFST/L - Left & SFST/R -Right)
2 x SFGB – Guardrail Horizontal Braces
3 x SFHB - Ribbed Brace
2 x SFSP - Step Platforms
1 x SFPP - Main Platform
Step by step guide
Always work on the podium with the knuckled gate facing the work area.
When leaving the podium, always descend, facing the knuckled gate.
1. Open the unit on a
firm and level base
lock the folding gate
section.
3. Fit the small
platforms on rung 1 &
2 to form the steps up
to the platform.
5. Fit a ribbed brace on
the rung below the
platform.
6. Fit stabilizers, left
& right.
7. Ascend to the
platform using the step
platforms and ribbed
brace.
8. Once the platform is
accessed, close the gate
behind you; ensure that
the clips are engaged.
9. To extend the unit.
Whilst standing on the
platform, extend the
top frames & Fit 2
horizontal braces.
10. Fit 2 guardrail
braces front and
back by swinging
them into place
11. When descending
from the platform, use
the step platforms
and face the knuckle
frame.
12. Fit the non slip ribbed
brace to the 2nd rung
above the step platform.
(Hooks facing outwards)
The Stepfold Podium 1
would include 1 of these
braces in this position
13. Access the
platform using the
step platforms and
non slip ribbed rung.
14. Once the platform
is accessed, close the
gate & swing the
horizontal brace back
onto its previous
position and begin
work.
Please Note: Stepfold Podium 1 is assembled in the same way as
Stepfold Podium 2, with just 1 less horizontal brace.
Podium 2
SWL 150 Kgs
2. Fit a ribbed brace
above the lowest
collar as shown.
4. Fit the working
platform on the 4th
rung.
Podium 1
STEP FOLD PODIUMS 1 & 2 Manufactured To a TUV Certified ISO 9001:2008 Quality Control System
Fully Approved & Certified to the PAS250 Standard for LLWP (Low Level Work Platforms)
Providing a platform level of 2m
(Working Height of 3m)
Ideal low level access for internal
and external use.
The inclined ladder allows a
gradual ascend to the working
platform.
This unit has a folding mechanism,
great for transportation and
storage.
Includes an extendable guardrail
gated frame to minimize the
amount of components and to clip
back into position for storage
purposes.
Optional Extras
Include:
Anti – Surf Base Plates
Toeboard Assembly
External Tool Tray
Kynol Decked Platform
Step Fold Podium 3
Stabilizers Included
with every unit
STEP FOLD PODIUM 3 Manufactured To a TUV Certified ISO 9001:2008 Quality Control System
Folds Flat
Easy
Access
STEP FOLD PODIUM 3 The Step Fold Podium 3
Assembly Instructions Ensure all parts are present and are not damaged before
assembling
Kit List – Podium 3 4 x K548 - 5” Castors
1 x SFP3 – Stepfold 3 Podium Base Unit
1 x SFSP/3 - Step Platform
1 x SFPP/3 - Main Platform
1 x SFCL – Stepfold 3 Clip in Ladder
2 x SFDB – Stepfold 3 Diagonal Brace
2 x SFST/3 – Stepfold 3 Stabilizers
Stepfold Podium 3
Platform Height 2m
Safe Working Load 150Kg
Dimensions 0.9m x 1.2m
Unit Weight C/W Stabilizers 56Kg
Always work on the podium with the knuckled gate facing the work area.
When leaving the podium, always descend, facing the knuckled gate.
1. Open the unit on a
firm and level base
lock the folding gate
section.
3. Ensure that the
castors are in the braked
position
5. Repeat this process
on the front of the unit
in the opposite direction
as shown.
9. Fit stabilizers 7. Fit the step platform
at the base of the unit
as shown.
8. Fit the ladder 1 rung below
the working platform.
Pivot the rung until the hook
is facing downwards and clip
into place.
10. Access the platform
using the step platforms
and ladder, keeping
contact with the unit at
all times.
11. Once the platform is
accessed, extend the
gate to its full length and
close.
STABILIZERS MUST BE USED AT ALL TIMES
THIS UNIT IS SUPPLIED WITH 4 CASTORS AS STANDARD
Manufactured To a TUV Certified ISO 9001:2008 Quality Control System
2. Fit the main platform on
the 8th rung as shown
4. Fit a diagonal brace
from the 1st to 3
rd rung
of the podium at the
back of the unit.
PLEASE NOTE:
To remove the ladder,
release the bottom catches
and turn the hooks
towards you.
This will enable the top to
be removed.
Step by step guide
12. The gate can be
extended simply by
releasing the button.
Once the gate is in the
designated place the
button will automatically
lock into place.
Gain speedy, easy access with the MINIFOLD UNIT
1 Man Mobile Aluminium Tower System
Euro one, quick assembly, one person aluminum mobile tower Easy to erect and dismantle by one person with the base unit forming a trolley for fast storage and transportation.
Aluminum Toe board set
4 Working heights up to 6.10m
Compact 1.2m x 0.7m base size
Fits through standard doorways
250mm rung pitch
One size frame for an easier build
4 Platform Heights
Tower condenses down to an easily transportable trolley.
SPECIFICATION
PLATFORM HEIGHTS 1.1m, 2.1m, 3.1m, 4.1m TOWER HEIGHTS 2.3m, 3.3m, 4.3m, 5.3m WORKING HEIGHTS 3.1m, 4.1m, 5.1m, 6.1m PLATFORM LENGTH 1.3m PLATFORM WIDTH 0.70m TOWER WEIGHT 130 Kgs SAFE WORKING LOAD 150 Kgs
EURO ONE KIT LIST 1.1m 2.1m 3.1m 4.1m
CASTOR 4 4 4 4
ADJUSTABLE LEG 4 4 4 4
4 RUNG FRAME 4 6 8 10
GUARDRAIL FRAME 3 4 6 7
TRAPDOOR PLATFORM 1 1 2 2
STABILIZER 4 4 4 4
TOEBOARD 1 1 1 1
ASSEMBLY BRACKET 0 1 2 2
Manufactured To a TUV Certified ISO 9001:2008 Quality Control System