Date post: | 25-Apr-2018 |
Category: |
Documents |
Upload: | nguyentuyen |
View: | 220 times |
Download: | 4 times |
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice
Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]
Product information Galvanised steel helical dead-end
Medium spans 100m – 250m
Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters).
They consist of 4 armour rods installed as a direct protection on the cable and a spiral dead-end used as an
anchor and installed on the armour rod protection.
Each helical dead-end set is including:
- 4 armour rods
- 1 helical dead-end
In addition to this helical dead-end, different accessories should be ordered depending on the pole structure and
configuration:
- 1 thimble
- 1 extension link or 1 turnbuckle
- 1 pole bracket
- 1 fixing method for the bracket to the pole (bolt, pole banding)
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice
Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]
Product information Galvanised steel helical dead-end
Medium spans 100m – 250m
Helical dead-end Armour rod Designation Capacity Wire Ø Qty of Length mm Wire Ø Qty of Length mm Weight
mm mm wires L L1 mm wires L M kg
GSDE AR 1050 white
10,5-11,3 3,25 5 820 533 2,18 (3x3)+5 = 14
1015 330 1,530
GSDE AR 1150 yellow
11,5-12,6 3,25 5 820 533 2,18 (3x4)+3 = 15
1015 330 1,570
GSDE AR 1250 black
12,5-13,6 3,25 5 820 533 2,18 4x4 = 16
1015 330 1,610
GSDE AR 1290
green 12,9-14,6 3,25 5 820 533 2,18
4x4 = 16
1015 330 1,625
GSDE AR 1350
blue 13,5-14,5 3,25 5 820 533 2,18
(3x4)+5 = 17
1015 330 1,655
GSDE AR 1420
red 14,2-15,2 3,25 5 820 533 2,18
(3x5)+3 = 18
1015 330 1,665
GSDE AR 1530 brown
15,3-16,6 3,25 5 820 533 2,18 (3x5)+3 = 18
1015 330 1,685
Hot dip galvanised steel.
Packaged in pairs of sets (1 set = 1 helical dead-end + 4 armour rods secured together with black plastic ties).
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice
Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]
Thimble: To be ordered separately.
Product information Galvanised steel helical dead-end
Medium spans 100m – 250m
Associated products: Thimbles
Thimble type A
U shaped thimble with pin bolt
Hot dip galvanised steel
Weight : 0.32 kg
Can be used with any extension link
Thimble type B
C shaped thimble
Hot dip galvanised steel
Weight : 0.12 kg
Can be used with any extension link
Thimble type C
Aluminium thimble with pin bolt
Aluminium
Weight : 0.35 kg
Can be used with any extension link
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice
Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]
Product information Galvanised steel helical dead-end
Medium spans 100m – 250m
Associated products: Extension links
Turnbuckle M12 30/04
Eye Ø : 20mm
Length between eyes : 230 – 310mm
Min. breaking load : 3000 daN
Hot dip galvanised steel
Packaging : carton of 50 units
Weight : 0.5 kg
Turnbuckle M16
Eye Ø : 25mm
Length between eyes : 290 – 380mm
Supplied with 2 nuts
Min. breaking load : 5000 daN
Hot dip galvanised steel
Packaging : carton of 25 units
Weight : 0.85 kg
Extension link xxx mm
Length between securing points : 300mm
Hot dip galvanised steel
Packaging : bag of 10 units
Weight : 1.25 kg
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice
Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]
Product information Galvanised steel helical dead-end
Medium spans 100m – 250m
Associated products: Shackles
The shackle is used for securing the extension link or turnbuckle on any fixing point on the pole.
Shackle M10 SH600
Min. breaking load : 1800 daN
Hot dip galvanised steel
Packaging : carton of 50 units
Weight : 0.12 kg
Shackle M12 with safety pin
Min. breaking load : 6000 daN
Hot dip galvanised steel
Packaging : carton of 25 units
Weight : 0.36 kg
Shackle M16 with safety pin
Min. breaking load : 9750 daN
Hot dip galvanised steel
Packaging : carton of 25 units
Weight : 0.36 kg
Manille M16 avec goupille
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice
Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]
Product information Galvanised steel helical dead-end
Medium spans 100m – 250m
Associated products: Pole brackets
Pin type bracket 7/05
Securing with 2 pole bands.
Min. breaking load : 2000 daN
Hot dip galvanised steel
Packaging : bags of 25 units
Weight : 0.35 kg
Universal pole bracket UPB
Securing with 2 pole bands or 1 bolt Ø 14 or 16mm.
Min. breaking load : 3000 daN
High strength aluminium alloy
Packaging : carton boxes of 30 units
Weight : 0.2 kg
Pole collar 7/00
Direct fixing on round poles with Ø around 110mm
Min. breaking load : 5000 daN
Supplied unassembled
Hot dip galvanised steel
Packaging : 10 units
Weight : 2.42 kg
Pole collar 7/01
Direct fixing on round poles with Ø around 135mm
Min. breaking load : 5000 daN
Hot dip galvanised steel
Packaging : 10 units
Weight : 3.52 kg
01/08 Non contractual photos. TELENCO reserves the right to modify characteristics without prior notice
Tel : +33 (0)476 35 00 15 Fax : +33 (0)476 35 01 79 E-mail : [email protected]
Product information Galvanised steel helical dead-end
Medium spans 100m – 250m
Associated products: Securing on poles
Bolts
Bolt BH14x225/145
Ø 14mm – Total / Threaded lengths : 225mm / 145mm
Supplied with 1 nut and 1 curved washer 70x35x5mm
Hexagonal head
Hot dip galvanised steel
Packaging : bags of 50 units
Weight : 0.38 kg
Bolt BH16x300/100
Ø 16mm - Total / Threaded lengths : 300mm / 100mm
Supplied with 1 nut, 1 flat washer 50x50x5mm and
1 flat washer 75x50x5mm
Hexagonal head
Hot dip galvanised steel
Packaging : bags of 25 units
Weight : 0.68 kg
Banding
Pole banding 20x0.7mm SB207
20x0.7mm band - 50m roll
Supplied in plastic dispenser
Stainless steel AISI304
Packaging : carton of 5 rolls
Weight : 5.1 kg
Heavy type buckle 20mm BIB20
Heavy type buckle adapted to 20mm pole band
Stainless steel AISI304
Packaging : bag of 100 units
Weight : 1 kg (per bag)
Band installation tool BTS
Screw type
Protected steel
Packaging : unit
Weight : 2 kg