8/11/2019 Gama de Produse_UK

http://slidepdf.com/reader/full/gama-de-produseuk 1/2

Standardproductrange

SCHMOLZ + BICKENBACH Group

Eupener Straße 70

D-40549 Düsseldorf / Germany

www.schmolz-bickenbach.com

8/11/2019 Gama de Produse_UK

http://slidepdf.com/reader/full/gama-de-produseuk 2/2

0.8 – 130 mm

2 – 60 mm

2 – 60 mm

2 – 18 mm

10 x 3 – 100 x 40 mm

Stainless and heat-resistant steel

Tool steel

Engineering steel

 Aerospace materials AusteniticDuplex steelsFerriticMartensitic

 Alloyed / unalloyed

Cold-work tool steelsHigh-speed steelsHot-work tool steelsPlastic mould steels

 Alloyed / unalloyed

Case hardening steelsCreep-resistantstructural steelsFree cutting steelsHigh-grade steelsNitriding steelsQuenched andtempered steelsWear-resistant steels

Drill collarsdiameter up to 280 mm(round)length up to 10 m

Pre-machinedrotationally symmetricalforgings forged to shape

Pre-machined rotationallysymmetrical forgingsforged to shape

WeldedOutside diameter: 10.2 – 711 mmWall thickness: 1.4 – 32 mm

SeamlessOutside diameter: 17.2 – 660 mmWall thickness: 4.5 – 100 mm

0.8 – 130 mm

2 – 22 mm

2 – 18 mm

0.8 –250 mm

Dra wn : u p to 100 m mGround bright: 110 – 150 mm

7 – 100 mm

2 – 60 mm

6 x 3 mm – 500 x 40 mm

Width: up to 2000 mm Thickness: 2 – 205 mm

Width: up to 2000 mm Thickness: 0.5 – 50 mmLength: up to 6000 mm

Wire rod5 – 32 mm

12,4 – 28 mm

Drawn wire0.013 – 22 mmCoils, spools,baskets, reels

Profiles1 – 60 mm2

Coils, reels,straightened products

Wire rod5.5 – 27 mm

Wire rod5.5 – 27 mm

Ingots0.6 – 40 t

Continuous casting

138, 150, 265 mm

475 x 340 mm

Semi-finished products

50 – 320 mm,rising in 1 mm increments

Ingots1 – 40 t

Continuous casting

138, 150, 265 mm

475 x 340 mm

Semi-finished products

50 – 320 mm,rising in 1 mm increments

Ingots1 – 40 t

Continuous casting

138, 150, 205, 265 mm

475 x 340 mm

Semi-finished products

50 – 320 mm,rising in 1 mm increments

7 – 250 mm

50 – 160 mm

Wid th : 80 – 510 m m Thickness: 24 – 160 mmWidth/thicknessratio 10:1 max.

Open-die forgings,rotationally symmetricalforgings forged to shapeon request up to 50 tsingle-piece weight

65 – 700 mm

50 – 750 mm

Single-piece weightup to 23 t

Open-die forgings, rotationallysymmetrical forgings forgedto shape on request up to50 t single-piece weight

65 – 900 mm

50 – 750 mm

Single-piece weightup to 23 t

Open-die forgings,rotationally symmetricalforgings forged to shapeon request up to 50 tsingle-piece weight

65 – 900 mm

50 – 750 mm

Single-piece weightup to 23 t

Pre-machined parts, turnedparts, pre-machined moulds,dies and frames to customerspecification

Cold rolls20 – 750 mm diameter

Mandrels diameterup to 280 mm (round)length up to 28 m

Pre-machining Tu besForged products / Extruded aluminiumproducts

Bright steelHot barsrolled

Wire rod / Drawn wire

Sheet steelIngotsContinuous castingSemi-finished products

Standard product range

Steel

7 – 250 mm

3 – 60 mm

50 – 160 mm

Wid th : 80 – 510 m m Thickness: 24 – 160 mmWidth/thicknessratio 10:1 max.

7 – 250 mm

50 – 160 mm

Wid th : 80 – 510 m m Thickness: 24 – 160 mmWidth/thickness ratio 10:1 max.

Ferro-Titanit ®

 Various sizes according tocustomer requirements

Round bars(cold-drawn, extruded)10 – 500 mm

Profiles(squares, hexagons,on request according tocustomer drawings)

Wid th : u p to 800 m m Thickness: 4 – 10 mmLength: up to 2000 mm

40 x 5 mm – 180 x 20 mm(cold-drawn, extruded)

 Aluminium

Cut-to-size plates6 – 150 mmsizes from 15 x 15 mm

Standard sheets rolled Thickness: 0.5 – 5 mm Sizes: 1000 x 2000 mm, 1250 x 2500 mm, 1500 x 3000 mm

Plates rolled Thickness: 5 – 150 mm Sizes: 1000 x 2000 mm, 1250 x 2500 mm, 1500 x 3000 mm

Chequer plates rolled  (duett - 2 bar, quintett - 5 bar) Thickness: 2.5 / 4 mm – 5 / 6.5 mmSizes: 1000 x 2000 mm, 1250 x 2500 mm, 1500 x 3000 mm

Individual specifications and dimensions supplied on request. Depending on the material used, dimensional restrictions are possible.General note (liability): All statements regarding the properties or utilization of the materials or products mentioned are for the purpose of description only. Guarantees regarding the existence of certain properties or a certain utilization are only ever valid if agreed upon in writing.

6 x 1 mm – 88.9 x 5 mmwelded process tubes annealed

6 x 1 mm – 609.6 x 5 mmwelded process tubes not annealed

8 x 1 mm – 129 x 2 mmwelded construction and decoration tubes

13 x 1 mm – 204 x 2 mmwelded dairy tubes

10 x 10 x 1 mm – 200 x 200 x 10 mm20 x 10 x 1 mm – 300 x 100 x 8 mmwelded square and rectangular tubes

40 x 10 x 1.5 mm – 80 x 20 x 2 mmSpeciality: flat profile tubes

Speciality: thick-wall tubes for steelconstruction incl. 10 mm wall(150 x 150 x 10 mm)