Date post: | 23-Jul-2016 |
Category: |
Documents |
Upload: | cl-tool-centre-pty-ltd |
View: | 222 times |
Download: | 0 times |
New Products page 2
Air Tools page 10
Clean-Up Tools page 18
Air Tools Accessories page 19
Hand Tools page 26
Engineering Equipment page 31
LIQUIDATION SALE! page 34
3/8 Stainless Steel Burr 3 Piece Set• New design burr optimised specially
for stainless steel.
Shank Dia: 1/4”PN: CBSET3INOX
$129.00See full range on page 22.
See full range on page 11.
NEW!
1” Super Duty Impact Wrench• Muffled Exhaust
• Muli Position Handle
Free Speed: 5,000 RPM Max. Torque: 1,800 Ft/Ibs Length: 275 MM Weight: 7.10 Kg
PN: KP1838A-P
$1,100.00
NEW!
NEW RANGE!
P R O F E S S I O N A L S P R A Y G U N S
2.6 mm Mini Quick Release Handle
• Handle only 100 MM long • Holds all 2.6 MM Ø Deburring Blades.
PN: GDMC1
$14.00Heavy Duty Air Scaling Hammer
PN: KP4733
699.00
Heavy Duty Coil Nailers
HVLP Gravity & Suction Feed Spray Guns
®
®
200 mm Coolant Proof IP54 Dual Scale Digital Caliper
PN: AC-111-008-11
$140.00
See full range on page 2.
See full range on page 29.
NEW HVLP RANGE!
NEW!
NEW!
See full range on page 7.
See full range on page 16.
See full range on page 16.
• Optional Side Handle Included
Impact Rate: 2,400 BPM Piston Stroke: 26 MM Length: 550 MM Weight: 4.0 Kg
• Highly accurate glass scale • USB data output • Meet DIN862 Standard
HVLP Gravity feed spray guns are now available in 1.3 mm, 1.4 mm & 1.8 mm nozzle sizes.
HVLP Suction feed spray guns are now available in 1.8 mm & 2.0 mm nozzle sizes.
$299 EA
Heavy Duty 15° Coil NailerNail Shank: 2.1-2.8 MM Fastener Length: 32-65 MM Angle: 15 Degrees Capacity: 200-400 nails Weight: 2.0 Kg
PN: BC2865D1
$599.00
Heavy Duty 0° Coil NailerNail Shank: 2.03-2.8 MM Fastener Length: 32-65 MM Angle: Flat 0 Degrees Capacity: 200-400 nails Weight: 2.3 Kg
PN: BC2865F1
$599.00
Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.
USB DATA OUTPUT
Quickly and accurately acquire data points via Mini USB cable. Data can be transfered directly into Excel with no additional software required.
Metric Dial Calipers Dual Scale Economical Digital Calipers
150 mm Plastic Dial Caliper PN: AC-117-006-11
$30.00
Coolant Proof IP67 Dual Scale Digital Calipers
Coolant Proof IP54 Dual Scale Digital Calipers
• Shockproof Measures: Inside, Outside & Depth
Functions: zero point, mm/inch Measures: Inside, Outside & Depth • USB data output • Meet DIN862
Functions: mm/in, zero point Measures: Inside, Outside • Made of hard plastic
• IP67 protection level Measures: Inside, Outside & Depth Functions: zero point, mm/inch
Functions: zero point, mm/in, ABS Measures: Inside, Outside & Depth • Highly accurate glass scale • USB data output • Meet DIN862 Standard
Functions: zero point, mm/inch, ABS, data preset Measures: Inside, Outside• USB data output
150 mm Metric Dial CaliperRange: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16.5 mm Ext. Jaw Reach: 40 mm
200 mm Metric Dial CaliperRange: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
300 mm Metric Dial CaliperRange: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Int. Jaw Reach: 25 mm Ext. Jaw Reach: 64 mm
PN: AC-101-006-11
$102.00PN: AC-101-008-11
$128.00PN: AC-101-012-11
$220.00
150 mm Dual Scale Digital CaliperRange: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm
200 mm Dual Scale Digital CaliperRange: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
300 mm Dual Scale Digital CaliperRange: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm
PN: AC-111-006-12
$79.00PN: AC-111-008-12
$115.00PN: AC-111-012-12
$180.00
Range: 0-150mm/0-6” Resolution: 0.01mm/0.0005” Accuracy: ±0.1mm
150 mm Dual Scale Coolant Proof Digital CaliperRange: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm
200 mm Dual Scale Coolant Proof Digital CaliperRange: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
300 mm Dual Scale Coolant Proof Digital CaliperRange: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm
PN: AC-112-006-12
$249.00PN: AC-112-008-12
$335.00PN: AC-112-012-12
$479.00
150 mm Dual Scale IP54 Digital CaliperRange: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm
200 mm Dual Scale Digital CaliperRange: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
300 mm Dual Scale Digital CaliperRange: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm
PN: AC-111-006-11
$110.00PN: AC-111-008-11
$140.00PN: AC-111-012-11
$215.00
600 mm Dual Scale Digital CaliperRange: Outside 0-620 mm/0-24.5” Inside 20-600 mm/0-24” Resolution: 0.01 mm/0.005” Accuracy: ±0.05 mm/0.002” Jaw Reach: 100 mm
1000 mm Dual Scale Digital CaliperRange: Outside 0-1020 mm/0-40.2” Inside 20-1000 mm/0-40” Resolution: 0.01 mm/0.005” Accuracy: ±0.08 mm/0.003” Jaw Reach: 150 mm
PN: AC-118-024-11
$549.00PN: AC-118-040-11
$1,125.00
USB DATA OUTPUT
USB DATA OUTPUT
USB DATA OUTPUT
USB DATA OUTPUT
Caliper Depth Base Attachment
PN: AC-179-000-00
$35.00
For calipers to increase the stability of depth measurementFor all calipers which range are 150 mm and 200 mm (beam width is 16 mm)Made of stainless steel
AB•S All ACCUD digital measuring devices utilize an Absolute Scale encoding system. This system ensures quick, accurate and reliable measurements in all working environments.
Page 2 - New Products
Dual Scale Vernier Calipers
Measures: Inside, Outside & Depth • Meet DIN862 Standard• Stain chrome plated reading surface • Made of stainless steel
Measures: Inside, Outside • With fine adjustment • Stain chrome reading surface
Measures: Inside, Outside • Meets DIN862 Standard
150 mm Metric Vernier CaliperRange: 0-150 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 15.5 mm Ext. Jaw Reach: 40 mm
200 mm Metric Vernier CaliperRange: 0-200 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm
300 mm Metric Vernier CaliperRange: 0-300 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.04/0.002” Int. Jaw Reach: 22 mm Ext. Jaw Reach: 64 mm
PN: AC-120-006-12
$56.00PN: AC-120-008-12
$84.00PN: AC-120-012-12
$138.00
600 mm Metric Vernier Long Jaw CaliperRange: Outside 0-620 mm/0-24.5” Inside 20-600 mm/0-24” Graduation: 0.002 mm/0.001” Accuracy: ±0.08 mm/0.003” Ext. Jaw Reach: 250 mm Int. Jaw Reach: 24 mm
Available in
2016
600 mm Metric Vernier CaliperRange: Outside 0-620 mm Inside 20-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm/0.002” External Jaw Reach: 100 mm Int. Jaw Reach: 18 mm
1000 mm Metric Vernier CaliperRange: Outside 0-1020 mm Inside 20-1000 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.08 mm/0.003” External Jaw Reach: 140 mm Int. Jaw Reach: 24 mm
2000 mm Metric Vernier CaliperRange: Outside 0-2020 mm Inside 20-2000 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.14 mm/0.006” External Jaw Reach: 200 mm Int. Jaw Reach: 24 mm
PN: AC-127-024-11
$315.00PN: AC-127-040-11
$899.00Available in
2016Dial Indicator & Micrometers Stands
Dial Test Indicator Centering HolderDial Test Indicator Centering Holder. For centering of cylinders or holes.
PN: AC-269-060-01
$29.00
Magnetic Indicator Stand with Fine adjustmentØ8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf Fine adjustment.
Magnetic Indicator StandØ8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf
PN: AC-281-060-01
$45.00PN: AC-281-060-02
$40.00
Magnetic 10 mm Dial Gauge Base KitMagnetic 10 mm Dial Gauge base kit
100 mm Micrometer StandMicrometer Stand suits micrometers that measure up to 100 mm.
PN: AC-280-000-02
$119.00
PN: AC-381-000-00
$39.00
Metric Dial & Dual Scale Digital Indicators
Metric Dial Test Indicators & Stands
PN: AC-261-008-11
$110.00
Functions: zero point, Invert measuring, inch/mm direction, data preset, ABS • USB data output • Supplied with flat and lug back
• 0.01 mm Graduations • Jeweled bearing• Carbide stylus• Double scale spacing• Anti-magnetic copper body • 4 mm & 8 mm Dia clamps.
• Limit hands• Jeweled bearing• 1 mm range per dial revolution• Lug back
Dual Scale Digital IndicatorRange: 12.7 mm/0.5” Resolution: 0.01 mm/0.0005” Accuracy: 20 μm
Jeweled Bearing Metric Dial IndicatorRange: 10 mm Accuracy: 20 μm
PN: AC-212-010-11
$245.00PN: AC-222-010-11
$380.00
Range: 0.8 mm Graduation: 0.01 mm Accuracy: ±13 μm
USB DATA OUTPUT
150 mm Metric Depth Micrometer
PN: AC-391-006-01
$245.00
Micrometer head accuracy: ±3μm Rod accuracy: ±(2+L/75)μm, L is the measuring range in mm Supplied with rods Ratchet stop
Range: 0-150mm Accuracy: ±31μm Base Span: 101.5 mm Base Width: 17 mm
Page 3 - New Products
Metric Micrometer Sets
Metric Outside Micrometers
Combination Square Set
PN: AC-817-180-02
$199.00
50-600 mm Metric Tubular Inside Micrometer
PN: AC-352-024-01
$375.00
• Carbide measuring faces • Ratchet stop
Supplied with setting standards Carbide measuring faces
75 mm Metric Micrometer 3 Piece SetSet consists of 3 Micrometers Range: 0-75 mm Graduation: 0.01 mm Accuracy: 5 μm
150 mm Metric Micrometer 6 Piece SetSet consists of 6 Micrometers Range: 0-150 mm Graduation: 0.01 mm Accuracy: 5 μm
PN: AC-321-003-03
$185.00PN: AC-321-006-06
$380.00
25 mm Metric Outside MicrometerRange: 0-25 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 29 mm
25-50 mm Metric Outside MicrometerRange: 25-50 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 39 mm
PN: AC-321-001-01
$45.00PN: AC-321-002-01
$50.00
50-75 mm Metric Outside MicrometerRange: 50-75 mm Graduation: 0.01 mm Accuracy: 5 μm Jaw Reach: 53 mm
75-100 mm Metric Outside MicrometerRange: 75-100 mm Graduation: 0.01 mm Accuracy: 5 μm Jaw Reach: 65 mm
PN: AC-321-003-01
$59.00PN: AC-321-004-01
$64.00
Protractor: Used to set or make an angle measurement, Range: 0-180° Accuracy: ±7’Square: Used as 90° or 45° square 90° square accuracy: ±8’, 45° square accuracy: ±10’Rule: Used as rule, range: 300 mm/12” Center finder: Used to find the cylinder center, Accuracy: ±0.15 mm
Set consists of 13, 25, 50, 100, 150 & 200 mm Extension Rods. Micrometer Head Travel: 13 mm Range: 50-600 mm Graduation: 0.01 mm Accuracy: (3+n+L/50) μm, n=number of rods, L=max. measuring length
25 mm Coolant Proof Dual Scale Digital Micrometer
PN: AC-313-001-01
$215.00
Functions: mm/inch, origin, zero point, ABS, hold, data export • IP65 protection level • Carbide measuring faces • Ratchet stop.
Range: 0-25 mm/0-1” Resolution: 0.001 mm/0.00005” Accuracy: 2 μm Jaw Reach: 24 mm
USB DATA OUTPUT
Metric Dial Bore Gauges
• Meets DIN862 Standard
50-160 mm Metric Dial Bore GaugeRange: 50-160 mm Graduation: 0.01 mm Accuracy: ±0.018 mm Length: 141 mm
PN: AC-251-160-11
$225.00
18-160 mm Metric Dial Bore Gauge SetSet consists of 18-35 mm, 35-60 mm & 50-160 mm Bore Gauges & Dial IndicatorDial indicator Range: 10 mm
Graduation: 0.01 mm
PN: AC-251-346-13
$579.00
Dual Scale Vernier Height Gauges
• Move main scale to set zero with adjustable scale• Carbide tipped scriber• Satin chrome plated scale• Vernier magnifier
300 mm Metric Vernier Height GaugeRange: 0-300 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.04 mm Slide Rail Width: 28 mm Length: 545 mm
PN: AC-186-012-11
$349.00
600 mm Metric Vernier Height GaugeRange: 0-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm Slide Rail Width: 35 mm Length: 870 mm
PN: AC-186-024-11
$479.00
Page 4 - New Products
Page 5 - New Products
Suprabeam warrants its products to be free from defects in materials and workmanship. Any product or part which is found to be defective under normal use will be repaired or replaced.
Miniature Torch
PN: SBQ1MINI
$55.00
The Ultimate Miniature
PN: SBQ2
$85.00
Compact & Powerful
PN: SBQ3
$85.00
Tactical Extreme Power
PN: SBQ7C
$129.00
3 Hour battery life 1 x AAA
Beam: Spot 5° Flood 65°
Body: Double Anodized Aluminium Brightness: 80 Lumens Beam: Focus by rotating Weight: 38 G Size: 98 MM x Ø15 MM
6 Hour battery life 1 x AA or NiMh
Beam: Spot 5° Flood 60°
Body: Double Anodized Aluminium Brightness: 120 Lumens Beam: Hyperfocus by sliding Weight: 80 G (inc batteries) Size: 116 MM x Ø26 MM Complete with durable pouch
10 Hour battery life 3 x AAA
Beam: Spot 5° Flood 60°
Body: Double Anodized Aluminium Brightness: 280 Lumens Beam: Hyperfocus by sliding Weight: 99 G Size: 115 MM x Ø26 MM Complete with durable pouch
8 Hour battery life 4 x AAA or NiMh
Beam: Spot 5° Flood 70°
Body: Double Anodized Aluminium Brightness: 350 Lumens Beam: Hyperfocus by sliding Weight: 196 G (inc batteries) Size: 134 MM x Ø39 MM Complete with durable pouch
120 Lumens
280 Lumens
350 Lumens
80 Lumens
Light Weight Headlamp
PN: SBV3AIR
$89.00
Rechargeable & Compact
PN: SBQ3R
$225.00
Rechargeable & Powerful
PN: SBQ4XR
$279.00
Rechargeable & Powerful
PN: SBQ7XR
$339.0020 Hour battery life Spot 5° Flood 60° 3 x AAA
Body: Anodized Aluminium/Plastic Brightness: 250(Boost) 15-150 (Dimmer) Beam: Hyperfocus by sliding floodlight spotlight to 220m range Headband: fits 50-70 cm Battery: 3 x AAA: 20h life Weight: 140 G inc battery
3-6 Hour battery life Beam: Spot 5° Flood 60°
Li Ion 18650 Rechargeable (spare battery included)
Body: Double Anodized Aluminium Brightness: 400 Lumens (on Boost) 250 Lumens (on high) 50 Lumens / Low and Strobe Beam: Hyperfocus by sliding Weight: 139 G inc battery Size: 127.7 MM x Ø26.5 MM
3-6 Hour battery life Beam: Spot 5° Flood 60°
Li Ion 18650 Rechargeable (spare battery included)
Body: Double Anodized Aluminium Brightness: 680 Lumens (on Boost) 350 Lumens (on high) 50 Lumens / Low and Strobe Beam: Focus by sliding Weight: 132 G inc battery Size: 134 MM x Ø32 MM
2-9 Hour battery life Beam: Spot 6° Flood 70°
Li Ion 26650 Rechargeable (spare battery included)
Body: Double Anodized Aluminium Brightness: 900 Lumens (on Boost) 400 Lumens (on high) 170 Lumens / Low and Strobe Beam: Focus by sliding Weight: 307 G inc battery Size: 150 MM x Ø46 MM
250 Lumens
400 Lumens
900 Lumens
680 Lumens
20 Hour battery life Spot 5°
Flood 60° 4 x AAA
Body: Anodized Aluminium/plastic Lumens: 320(high) 30 (reduced) Beam: Hyperfocus by sliding floodlight - spotlight to 180 m range Headband: fits 50-70cm Battery: 3 x AAA: 20h life Weight: 160 G inc battery
C/W durable pouch, washable headband
20 Hour battery life Spot 6°
Flood 60° Li-ion Rechargeable
Body: Anodized Aluminium/plastic Brightness: 400 Lumens (on boost) 200 Lumens (on high) 20 Lumens (reduced) Beam: Hyperfocus by sliding floodlight - spotlight to 180 m range Headband: Fits 50-70cm Battery: LI-ion: 20h life Weight: 184 G (Including battery)
C/W durable pouch, washable headband
Head Light PN: SBV3
$119.00Rechargeable Head Light
PN: SBV3R
$239.00
Bike AttachmentSuits for the Q3 torch
Traffic Wand PN: SBQ3W
The Q3 Traffic Wand for those unexpected emergencies.
Flood Light AttachmentConvert your torch or head torch into a compact flood light for workshop, car or camping. Suits SBQ3, SBQ3R, SBV3 & SBV3R
Q3 / V3 Colour FiltersIncludes Blue, Red, Green & Yellow filters.
PN: SBBIKEHOLDER
$22.00
PN: SBQ3W
$15.00
PN: SBCAMPINGBULB
$22.00
PN: SB3CF
$49.00
Suprabeam Accessories
320 Lumens
400 Lumens
FREE FLOOD LIGHT ATTACHMENT
FREE FLOOD LIGHT ATTACHMENT
K320 Gravity Feed 1.2 MM Spray Gun
Nozzle: 1.2 MM S-Steel Pattern Width: 140 MM Air Cons.: 3.2 cfm Fluid Output: 100 ML
PN: K320M12
Page 6 - New Products
NEW!Working Pressure: 30-45 PSI Fluid Capacity: 125 CC Fluid Feed: Gravity Fluid Inlet: M15 Weight: 280 G
• Chrome & Nickel-plated aluminum body.
• High grade stainless steel nozzle & needle.
• Teflon seals & packing.• Suitable for both oil and
water-based painting.
P R O F E S S I O N A L S P R A Y G U N S
K320 Mini Gravity Feed Spray Guns
K818 Gravity Feed Spray Guns
K818 Suction Feed Spray Guns
Short fluid passages offer quicker cleaning and maintenance.Gravity feed requires less air pressure to drive fluid feed, resulting in a higher quality finish across a wide fluid viscosity range.
Suction provides a mild agitating action to the fluid as the gun is being used. Suction Feed Spray Guns can carry larger amounts of paint while retaining gun stability.The configuration of the fluid pot offers access to tighter working spaces. Achieves quality finishes with light viscosity paints or stains.Suitable for adhesive coatings, specialised coatings or textured finishes.
Working Pressure: 30-45 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: M14 × 1.0P Weight: 514 G
• Forged aluminum body with smooth anodised finish for easy cleaning.
• Suitable for low viscosity oil and water-based painting.
• High grade stainless steel nozzle & needle for easy cleaning & long service life.
• Complies to CE standards• Teflon seals & packing.
Working Pressure: 30-45 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M14 × 1.0P Weight: 280 G
• Exceptional fluid atomization.• Forged aluminum body with
smooth anodised finish for corrosion resistance & easy cleaning.
• Teflon seals & packing.• Suitable for both oil and
water-based painting.• High grade stainless steel
nozzle & needle for easy cleaning & long service life.
• Complies to CE standards.
K320 Gravity Feed 0.8 MM Spray Gun
Nozzle: 0.8 MM S-Steel Pattern Width: 140 MM Air Cons.: 3.2 cfm Fluid Output: 80 ML
PN: K320M08$179 EA
K818 Gravity Feed 1.3 MM Spray Gun
Applications: 2-Pack, Metallics, Enamel, Stain
Nozzle: 1.3 MM S-Steel Pattern Width: 305 MM Air Cons.: 7.5 cfm Fluid Output: 210 ML
PN: K818M13
K818 Gravity Feed 1.4 MM Spray Gun
Applications: 2-Pack, Metallics, Enamel, Stain
Nozzle: 1.4 MM S-Steel Pattern Width: 310 MM Air Cons.: 7.5 cfm Fluid Output: 220 ML
PN: K818M14
K818 Gravity Feed 1.8 MM Spray Gun
Applications: 2-Pack, Metallics, Acrylic, Enamels, Primer, Stains.
Nozzle: 1.8 MM S-Steel Pattern Width: 330 MM Air Cons.: 7.8 cfm Fluid Output: 300 ML
PN: K818M18
K818 Gravity Feed 2.5 MM Spray Gun
Applications: Heavy viscosity fluids, Glue, Spray Putty.
Nozzle: 2.5 MM S-Steel Pattern Width: 350 MM Air Cons.: 7.8 cfm Fluid Output: 380 ML
PN: K818M25
K818 Suction Feed 1.3 MM Spray Gun
Applications: 2-Pack, Metallics, Enamels, Polyurethanes.
Nozzle: 1.3 MM S-Steel Pattern Width: 305 MM Air Cons.: 7.5 cfm Fluid Output: 200 ML
PN: K818S13
K818 Suction Feed 2.0 MM Spray Gun
Applications: Heavy viscosity fluids, Acrylics, Enamels, Primer, Glue, Stains.
Nozzle: 2.0 MM S-Steel Pattern Width: 340 MM Air Cons.: 7.8 cfm Fluid Output: 340 ML
PN: K818S20
K818 Suction Feed 2.5 MM Spray Gun
Applications: Heavy viscosity fluids, Glue, Spray Putty.
Nozzle: 2.5 MM S-Steel Pattern Width: 350 MM Air Cons.: 7.8 cfm Fluid Output: 380 ML
PN: K818S25
$259 EA
$259 EA
Page 7 - New Products
Applications: Acrylics, Enamels, Stains.
• Side mount adjustable fluid pot.• Chrome-plated metal body for
easy cleaning.• Suitable for both oil and water-
based painting.
SG420 Gravity Feed Air Brush
KH818 Gravity Feed HVLP Spray Guns
KH818 Suction Feed HVLP Spray Guns
The combination of HVLP technology and gravity feed spray guns offers many benefits. High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The benefit of this technology is a more efficient transfer of paint, while consuming less air. The configuration of gravity feed spray guns provide a constant supply of fluid pressure to the spray cap, offering the ability to work with both light and heavy viscosity fluids.
The main advantage of Suction Feed Spray Guns is that they can carry larger amounts of paint while retaining gun stability. Suction Feed Spray Guns are suitable for adhesive coatings, specialised coatings or textured finishes. High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The configuration of suction feed pots provide a mild agitating action to the fluid as the gun is being used.
SG420A air brush is suitable for fine touch-up and custom detailing applications. All metal parts with high quality stainless steel nozzle and needle for easy cleaning. Achieve high levels of control with this fully adjustable gravity feed air brush.
SG420A Gravity Feed Air BrushNozzle: 0.3 MM Working Pressure: 14-50 PSI Air inlet: 1/8” Fluid Output: 7 CC Fluid Capacity: 7 CC Fluid Feed: Gravity Weight: 280 G
PN: SG420A
$110.00
KH818 Suction Feed 1.8 MM Spray Gun
Applications: Acrylics, enamels, polyurethanes, Metallics, Lacquers.
Nozzle: 1.8 MM S-Steel Pattern Width: 310 MM Air Cons.: 7.8 cfm Fluid Output: 180 ML
PN: KH818S18
KH818 Suction Feed 2.0 MM Spray Gun
Applications: Acrylics, Glue, enamels, polyurethanes, Metallics, Lacquers, Primer.
Nozzle: 2.0 MM S-Steel Pattern Width: 320 MM Air Cons.: 7.8 cfm Fluid Output: 210 ML
PN: KH818S20
KH818 Gravity Feed 1.3 MM Spray Gun
Applications: 2 Pack, stains, enamels, polyurethanes
Nozzle: 1.3 MM S-Steel Pattern Width: 300 MM Air Cons.: 9.6 cfm Fluid Output: 140 ML
PN: KH818M13
KH818 Gravity Feed 1.4 MM Spray Gun
Applications: 2 Pack, stains, enamels, polyurethanes
Nozzle: 1.4 MM S-Steel Pattern Width: 310 MM Air Cons.: 9.6 cfm Fluid Output: 150 ML
PN: KH818M14
KH818 Gravity Feed 1.8 MM Spray Gun
Applications: Acrylics, enamels, Metallics, Lacquers
Nozzle: 1.8 MM S-Steel Pattern Width: 320 MM Air Cons.: 9.9 cfm Fluid Output: 200 ML
PN: KH818M18
$299 EA
$299 EA
Working Pressure: 20~28 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M16 Weight: 514 G
• Exceptional fluid atomization.• Forged aluminum body with
smooth anodised finish for corrosion resistance & easy cleaning.
• Teflon seals & packing.• Includes mini air regulator
• Suitable for both oil and water-based painting.
• High grade stainless steel nozzle & needle for easy cleaning & long service life.
• Complies to CE standards.
Working Pressure: 20-28 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: 3/8” Weight: 514 G
• Forged aluminum body with smooth anodised finish for easy cleaning.
• Includes mini air regulator• Suitable for low viscosity oil
and water-based painting.
• High grade stainless steel nozzle & needle for easy cleaning & long service life.
• Complies to CE standards• Teflon seals & packing.
NEW HVLP RANGE!
NEW HVLP RANGE!
Suction provides a mild agitating action to the fluid as the gun is being used. Suction Feed Spray Guns can carry larger amounts of paint while retaining gun stability.The configuration of the fluid pot offers access to tighter working spaces. Achieves quality finishes with light viscosity paints or stains.Suitable for adhesive coatings, specialised coatings or textured finishes.
• High grade stainless steel nozzle & needle for easy cleaning & long service life.
• Complies to CE standards• Teflon seals & packing.
NEW PRODUCTS NEW PRODUCTSP R O F E S S I O N A L S P R A Y G U N S
Page 8 - New Products
Pressure Feed Spray Gun SystemsSpray large quantities of fluid without the need to refill a smaller gun-mounted pot. Another benefit of pressure feed systems is a lighter and easier to handle spray gun. Pressure Feed Spray Gun Systems includes fluid tank, hose and Prowin K818 Spray Gun with your choice of 1.2, 1.5, 1.8, 2.0 or 2.5 MM nozzle. See spray gun specications at the bottom of the page.
Features:• Tank Pressure Regulator• Air release valve• Safety release valve• Tank handle/hanger• Complies to CE standards
Features:• 3 meter hose • Tank Pressure Regulator• Air release valve• Safety release valve• Tank handle/hanger• Complies to CE standards
2 Litre Pressure Feed TankHose: 8 MM ID x 3 M (PU+Nylon)Tank dimensions: 130L MM x 130W MM x 445H MM
Capacity: 2 LitreTank: AluminiumMax. pressure: 60 PSI
Weight total: 2.15 Kg
10 Litre Pressure Feed TankHose: 8 MM ID x 3 M (PU+Nylon)Tank dimensions: 315L MM x 315W MM x 485H MM
Capacity: 10 LitreTank: AluminiumMax. pressure: 60 PSI
Weight total: 10.1 Kg
2 Litre Pressure Feed Spray Gun System
$499 EA
Pressure Feed Spray Guns
10 Litre Pressure Feed Spray Gun System
$695 EA
20 Litre Pressure Feed Spray Tank SystemThe design of a pressure feed spray system offers a lighter and easier to handle spray gun and the ability to spray large quantity of fluid without the need to refill a smaller gun-mounted pot. The 20 Litre Pressure Feed Spray Tank System includes a Prowin K818 1.8 MM Spray Gun, 20 litre fluid tank with manual agitation and 10 Meter supply hose.
$1395 EA
Features:• 10 meter hose• Stainless Steel Liner • Tank Pressure Regulator• Air release valve• Safety release valve• Manual Agitation• Complies to CE standards
K818 Pressure Feed 20 Litre Pressure Feed TankHose: 8 MM ID x 10 M (PU+Nylon)Tank dimensions: 400L MM x 400W MM x 780H MM
Capacity: 20 LitreTank: AluminiumMax. pressure: 60 PSI
Weight total: 26 Kg
K818 Pressure Feed 1.2 MM Spray Gun
Nozzle: 1.2 MM S-SteelWorking Pressure: 30-45 PSI
Pattern Width: 300 MM
Air Cons.: 7.5 CFM
Fluid Output: 170 ML
Fluid Inlet: 3/8”
K818 Pressure Feed 1.5 MM Spray Gun
Nozzle: 1.5 MM S-SteelWorking Pressure: 30-45 PSI
Pattern Width: 315 MM
Air Cons.: 7.5 CFM
Fluid Output: 240 ML
Fluid Inlet: 3/8”
K818 Pressure Feed 1.8 MM Spray Gun
Nozzle: 1.8 MM S-SteelWorking Pressure: 30-45 PSI
Pattern Width: 330 MM
Air Cons.: 7.8 CFM
Fluid Output: 300 ML
Fluid Inlet: 3/8”
K818 Pressure Feed 2.0 MM Spray Gun
Nozzle: 2.0 MM S-SteelWorking Pressure: 30-45 PSI
Pattern Width: 340 MM
Air Cons.: 7.8 CFM
Fluid Output: 340 ML
Fluid Inlet: 3/8”
K818 Pressure Feed 2.5 MM Spray Gun
Nozzle: 2.5 MM S-SteelWorking Pressure: 30-45 PSI
Pattern Width: 350 MM
Air Cons.: 7.8 CFM
Fluid Output: 380 ML
Fluid Inlet: 3/8”
1.3 mm Nozzle PN: PW10LTRK121.5 mm Nozzle PN: PW10LTRK151.8 mm Nozzle PN: PW10LTRK182.0 mm Nozzle PN: PW10LTRK202.5 mm Nozzle PN: PW10LTRK25
1.3 mm Nozzle PN: PW20LTRK121.5 mm Nozzle PN: PW20LTRK151.8 mm Nozzle PN: PW20LTRK182.0 mm Nozzle PN: PW20LTRK202.5 mm Nozzle PN: PW20LTRK25
1.3 mm Nozzle PN: PW2LTRK121.5 mm Nozzle PN: PW2LTRK151.8 mm Nozzle PN: PW2LTRK182.0 mm Nozzle PN: PW2LTRK202.5 mm Nozzle PN: PW2LTRK25
NEW PRODUCTS NEW PRODUCTS
Page 9 - New Products
50 mm Quick-Lock Sanding Discs
$9.00 EA
50 mm Quick-Lock Mini Flap Discs $22.00 EA
75 mm Quick-Lock Sanding Discs $14.00 EA
75 mm Quick-Lock Mini Flap Discs $33.00 EA
4”″Rubber Tipped Blow Gun
• Integrated metal inlet thread
• Rubber Tip
Length: 110 MM Inlet: Japanese Compatible Fitting Material: POM/Steel
PN: GP1562
$15.00
Extendible Blow Gun• Adjustable nozzle length.
• 360° adjustable nozzle angle.
• Locking ring.
• Integrated metal inlet thread
Length: 270 to 390 MM
Inlet: Japanese Compatible Fitting
Material: POM/Steel
PN: GP1562E
$24.00
Pocket Blow Gun• Rubber Tip • Roll Throttle
Length: 115 MM Inlet: Japanese Compatible Fitting Material: Aluminium/POM PN: PBGN
$13.00
50 mm Velcro Backing PadAttaches velcro pads to tool. Backing Pad: 50 MM Shank Dia.: 1/4”
75 mm Velcro Backing PadAttaches velcro pads to tool. Backing Pad: 75 MM Shank Dia.: 1/4”
PN: GPA50
$28.00PN: GPA75
$36.00
2” Quick-Lock Preparation Kit7 Piece kit includes 1 of each: 1/4” shank, 2” backing pad, 24 Grit 2” disc, 36 Grit 2” disc, 50 Grit 2” disc, Brown (Coarse) surface prep 2” disc & Maroon (Medium) surface prep 2” disc.
3” Quick-Lock Preparation Kit7 Piece kit includes 1 of each: 1/4” shank, 3” backing pad, 24 Grit 3” disc, 36 Grit 3” disc, 50 Grit 3” disc, Brown (Coarse) surface prep 3” disc & Maroon (Medium) surface prep 3” disc.
PN: GPK2
$29.00PN: GPK3
$39.00
36 Grit Sanding Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012S36
60 Grit Sanding Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012S60
80 Grit Sanding Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012S80
120 Grit Sanding Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012S120
40 Grit Mini Flap Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012F40
60 Grit Mini Flap Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012F60
80 Grit Mini Flap Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012F80
120 Grit Mini Flap Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012F120
36 Grit Sanding Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013S36
80 Grit Sanding Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013S80
40 Grit Mini Flap Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013F40
60 Grit Mini Flap Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013F60
80 Grit Mini Flap Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013F80
120 Grit Mini Flap Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013F120
Pack of 5.
Pack of 5.
Pack of 5.
Pack of 5.
TRADE QUALITYPneumatic Tools & Fasteners
Page 10 - Air Tools12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.
CUTTING, GRINDING & HAMMING TOOLS
IMPACT WRENCHES RATCHET WRENCHES
For Heavy automotive and truck work, such as tyre changing, shock, spring work and front end work where extra powerful tools are needed.
Spring RetainerSuits most Air Hammers Packet of 2.
PN: GPA70X2
$12.00
1/2’’ Impact Wrench with 2’’ Extended AnvilMax Torque: 490 Ft/lbs Free Speed: 7,500 RPM Weight: 2.87 Kg Length: 236 MM
PN: BIT242-2
$259.00
1/2” Ratchet WrenchMax Torque: 70 Ft/lbs Length: 306 MM Weight:1.3 Kg
PN: BRP207B1
$189.00
1/2” Impact WrenchFree Speed: 7,500 RPM Max Torque: 500 Ft/lbs Weight: 2.57 Kg Length: 197 MM
PN: BIT242
$239.00
1/4” Mini Ratchet WrenchMax Torque: 30 Ft/lbs Length: 182 MM Weight: 0.63 Kg
PN: BRP003B1
$169.00
1/2” Twin Hammer Impact WrenchMax Torque: 685 Ft/lb Weight: 1.94 Kg
PN: BIT260M1
$299.00
3/4” Twin Hammer Impact WrenchMax Torque: 1,100 Ft/lbs Free Speed: 5,500 RPM Weight: 5.72 Kg Length: 227 MM
PN: BIT3110
$599.00
1/4” 115° Angle Die Grinder
PN: BG230RA1
$189.00
3/8” Butterfly ImpactMax Torque: 70 Ft/lbs Free speed: 160 RPM Length: 306 MM Weight: 1.3 Kg
PN: BIK107A1
$169.00
1/4” 5” Extended Die GrinderCollet Size: 1/4" Free Speed: 21,000 RPM Length: 280 MM Weight: 0.80 Kg
PN: BG215RA1
$189.00
3/8” Impact WrenchFree Speed: 10,000 RPM Max Torque: 190 Ft/lbs Weight: 1.23 Kg Length: 158 MM
PN: BIP114A1
$199.00
1/4” Angle Die Grinder
PN: BG220RA1
$189.00
1/4” Medium Die Grinder
PN: BG210R
$159.00
2” Angle Grinder
PN: BG222RA1
$189.00
3” Cut Off Tool
PN: BCTA1
$139.00
3” Cut Off Discs pkt 5Discs only 0.8 mm thick. Ø75 x 0.8 x Ø9.53 mm Speed Rated to 25,000 RPM
PN: CO007K
$16.00
50 Mm (2”) Angle Grinder DiscSuits BG222RA1 Rated Speed: 23,000 RPM Size: 50 x 4 x 9.53 mm
PN: 3510232
$8.50
Air Hammer KitAir Hammer Kit includes: 5 chisels and quick change spring retainer Impact Rate: 2,900 BPM
PN: BHA67A1
$229.00
HUGE POWER!
Free Speed: 15,000 RPM Length: 188 MM Weight: 0.8 Kg
Free Speed: 21,000 RPM Length: 195 MM Weight: 0.8 Kg
Collet Size: 1/4" Free Speed: 20,000 RPM Length: 178 MM Weight: 0.75 Kg
Collet Size: 1/4" Free Speed: 20,000 RPM Weight: 0.55 Kg
Collet Size: 1/4" Free Speed: 18,000 RPM Length: 178 MM Weight: 0.80 Kg
TRADE QUALITYPneumatic Tools & Fasteners
Page 11 - Air ToolsPage 10 - Air Tools 12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.
50 MM C1 BradderNail Shank: 1.00 MM x 1.25 MM Nail Length: 16-50 MM Capacity: 100 Nails Weight: 1.50 Kg
PN: B1850A1
$249.00Medium Duty 80 Series StaplerStaple Crown: 12.8 MM (80 Series) Staple Length: 6-16 MM Capacity: 100 Staples Weight: 0.90 Kg
PN: BN8016E
$169.00Standard 97 Series StaplerStaple Crown: 4.5 MM (97 Series) Staple Length: 10-25 MM Capacity: 142 Staples Weight: 1.2 Kg
PN: BS9725B1
$185.00
2.2 MM T-NailerNail Shank: 2.2 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg
PN: BT2264A1
$399.002.5 MM T-NailerNail Shank: 2.5 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg
PN: BT2564A1
$399.0034° DA NailerNail Shank: 1.8 MM Fastener Length: 25-64 MM Angle: 34° Capacity: 100 Nails Weight: 1.90 Kg
PN: BA3464A1
$389.00
32 MM C1 BradderNail Shank: 1.00 x 1.25 MM Nail Length: 10-32 MM Capacity: 100 Nails Weight: 0.60 Kg
PN: B1832PA2
$159.00Light Duty Stapler 6000/L Series StaplerStaple Crown: 5.8 MM (6000/L Series) Length: 13-25 MM Capacity: 100 Staples Weight: 0.60 Kg
PN: BS9025PA2
$169.00Medium Duty 6000/L Series StaplerStaple Crown: 5.8 MM (6000/L Series) Staple Length: 13-40 MM Capacity: 100 Staples Weight: 1.18 Kg
PN: BS9040LA1
$259.00
Heavy Duty C-Brad StaplerNail Shank: 1.4 MM x 1.6 MM Fastener Length: 19-50 MM Capacity: 100 Weight: 2.00 Kg
PN: B1650B1
$339.00 Medium Duty C-Brad NailerNail Shank: 1.4-1.6 MM Fastener Length: 19-50 MM Capacity: 100 Nails Weight : 1.50 Kg
PN: B1650LA1
$259.00
SANDERS
NAIL & STAPLER GUNS
NAIL GUN OILBasso Nail Gun Oil 250 ML
Basso Nail Gun Oil 1 Liter
PN: BO250
$9.50
PN: BO1000
$17
6” Random Orbital SanderDisc Size: 6" Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg
PN: BOS156A1
$229.00
6” Random Orbital Self Generating Dust Free SanderDisc Size: 6"Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg
PN: BOS156SA1
$249.00
8” Geared Central Vac Sander (non self generating) Free Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.05 Kg
PN: BOS258GRC-D1
$439.00
8” Geared SanderFree Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.00 Kg
PN: BOS258GR-D1
$429.00
Heavy Duty StaplerStaple Crown: 5.8 MM (6000/L Series) Staple Length: 13 MM - 40 MM Capacity: 160 Staples Weight: 1.70 Kg
PN: B9040A1
$359.00
AIR TOOLS 12 Months Factory Warranty
Page 12 - Air Tools
Air Hammer KitKit includes 5 Chisels, Oiler, Spring Retainer and Case.
Shank Size: 10.2 MM (round) Stroke Length: 19.05 MM Free Speed: 3,000 BPM Weight: 1.70 Kg PN: GP102KD
$98.00
NEEDLE SCALERS
Needle Scaler AttachmentFits most Air Hammers
PN: GP60012
$79.00
Straight Needle ScalerFree Speed: 4000 BPM
PN: GP201
$289.00
SURFACE PREP TOOL & ACCESSORIES5” Disc Sanderc/w 3”, 4” & 5” Discs. 50 MM Surface Pads and Adapter Free Speed: 16,000 RPM
PN: GP1204R
$118.00
50 mm Backing PadAttach abrasive pads to tool. Includes 1/4” shank adapter.
75 mm Backing PadAttach abrasive pads to tool. Includes 1/4” shank adapter.
PN: GPA1523K
$15.00PN: GPA1524K
$19.00
50 mm Abrasive PadsBlue 50 mm Fine Abrasive Pad Packet of 10 PN: GPA1527X10
Maroon 50 mm Medium Abrasive Pad Packet of 10 PN: GPA1528X10
Brown 50 mm Coarse Abrasive Pad Packet of 10 PN: GPA1526X10
75 mm Abrasive Pads Brown 75 mm Coarse Abrasive Pad Packet of 10 PN: GPA1529X10
Blue 75 mm Fine Abrasive Pad Packet of 10 PN: GPA1530X10
$28.00 EA
$49.00 EA
SANDERS
Air Needle Scaler & Flux Chipper Kit
• Combo Tool Kit includes blow mold case, 1 x Moil Point, 1 x 20 MM Flat Chisel 1 x 35 MM Bent Chisel, 1 x Needle Attachment.
PN: GP268K
$379.00
8 Piece Flap Wheel KitKit includes: 25 mm x 12 mm, 120 Grit, x 1 25 mm x 25 mm, 40 Grit, x 1 25 mm x 25 mm, 80 Grit, x 1 40 mm x 25 mm, 60 Grit, x 1 40 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 60 Grit, x 2
PN: GFWK
$49.00
6” Random Orbital Sander
Straight Line SanderTakes 70 x 445 MM clip on paper. Suits flat automotive panel work. Pad Size: 397 x 68 MM Free Speed: 2,500 RPM Weight: 2.5 Kg
PN: GP1203
$179.00
Pad Size: 6” (velcro) Orbit Diameter: 7 MM Free Speed: 9,000 RPM Weight: 2.0 Kg
PN: GP1205
$129.00
50 mm Q/Change Felt Polishing Pad
75 mm Q/Change Felt Polishing Pad
PN: GPA1525
$8.00PN: GPA1575
$12.00
Taper Spindle1/4” Round Shank
Calico Polish MopSuits TS12 Taper Spindle 50 MM Diameter
PN: TS12
$39.00PN: PMC50
$28.00
Spring Retainer For Air HammersHeavy Duty Quick Change
PN: GPA2311
$45.00
Air Caulking Gun
PN: GPA1352A-3
$74.00
Takes 300 G Cartridges Recommended air pressure 15-40 PSI
SANDBLASTERIdeal for spot and rust removal9 Oz capacity
PN: GPASB100
$55.00
AIR TOOLS 12 Months Factory Warranty
Page 13 - Air Tools
7” SANDERS & POLISHERS
7” Disc SanderSpindle: Male 5/8-11UNCFree Speed: 4,500 RPM
Weight: 2.6 Kg
Avg Air Cons.: 12 cfm
7” Angle PolisherSpindle: Male 5/8-11UNCFree Speed: 2,500 RPM
Weight: 2.6 Kg
Avg Air Cons.: 12 cfm
PN: GP1206A
$255.00PN: GP1206P
$255.00
BELT SANDERS10 mm Belt SanderBelt Size: 10 x 330 MM
PN: GP1264A
$219.00
SANDING ACCESSORIES6”(150 mm) Velcro Pad 5/16” External Thread
6” (150 mm) Velcro Dust Free Pad 5/16” External Thread • Dust Free
PN: F6505
$32.00PN: F6565
$35.00
150 mm Velcro PadM14 x 2 Int. Thread
100 mm Nylon PadM10 x 1.5 Int. Thread Includes Lock Nut
125 mm Nylon PadM14 x 2 Int. Thread Includes Lock Nut
178 mm Nylon PadM14 x 2 Int. Thread Includes Lock Nut
5” Rubber Turbo Backing Pad5/8 x 11” Internal Thread.
PN: GTP162258
M14 int thread
PN: GTP162214
7” Rubber Turbo Backing Pad5/8 x 11” Internal Thread. PN: GTP1736
M14 int thread PN: GTP1737
PN: FP36155
$49.00
PN: FP20020
$19.00
PN: FP20210
$21.00
PN: FP20410
$39.00
$25.00 EA
$49.00 EA
100% Merino sheep skin wool pile with tie cord.
Max. speed: 2,500 RPm Thickness: 32 mm
5" (125 mm) Merino Wool Sheep Skin Polishing Bonnet.
7" (180 mm) Merino Wool Sheep Skin Polishing Bonnet.
PN: FP40005
$26.00PN: FP40015
$32.00
Versatile support handle can be set to any position within it’s 180 ° range.
Kit includes: Spare disc hub, five 105 mm (4 inch) stripping wheels & carry case.
PN: GP2001A
$559.00
Grinding Wheels to suit GP2001A
Air Rust & Paint Removal Tool Kit (Non-vacuum)
$45.00 EA
Hooked Wire Disc 0.5 mm gauge PN: GPA2001A-1
H-Duty Hooked Straight Wire Wheel 0.7 mm gauge PN: GPA2001A-3
Wire Disc 0.55 mm gauge PN: GPA2001A-2
Stripping Disc PN: GPA2001A-5
Rubber Disc PN: GPA2001A-4
40 Grit 10 MM x 330 MM Pack of 10 PN: SIP10MMXP40
60 Grit 10 MM x 330 MM Pack of 10 PN: SIP10MMXP60
80 Grit 10 MM x 330 MM Pack of 10 PN: SIP10MMXP80
100 Grit 10 MM x 330 MM Pack of 10 PN: SIP10MMXP100
120 Grit 10 MM x 330 MM Pack of 10 PN: SIP10MMXP120
$25.00 Pkt
10 mm BELTS
20 mm BELTS 40 Grit 20 MM x 520 MM Pack of 10 PN: SIP20MMXP40
60 Grit 20 MM x 520 MM Pack of 10 PN: SIP20MMXP60
80 Grit 20 MM x 520 MM Pack of 10 PN: SIP20MMXP80
100 Grit 20 MM x 520 MM Pack of 10 PN: SIP20MMXP100
120 Grit 20 MM x 520 MM Pack of 10 PN: SIP20MMXP120
$38.00 Pkt
20 mm Belt SanderBelt Size: 20 x 520 MM
PN: GP1265A
$319.00
AIR TOOLS 12 Months Factory Warranty
Page 14 - Air Tools
AIR ENGRAVERAir Engraving StylusIncludes medium stylus
PN: GP110
$229.00
Fine Point Stylus to suit GP110
Medium Point Stylus to suit GP110
Wide Point Stylus to suit GP110 67.85 EA
PN: GP110-16
PN: GP110-17
PN: GP110-18
DRILLS3/8” Reversible Keyed Drill
Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg
3/8” Reversible Keyless Drill
Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg
1/2” Reversible Keyed Drill
Free Speed: 800 RPM Chuck Size: 1/2” (12.7 mm) Drilling Capacity: 13 mm (1/2”) Spindle Size: 3/8 x 24 UNF Weight: 1.76 Kg
3/8” Angle Reversible Drill
Free Speed: 1500 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.02 Kg
PN: GP41013
$135.00
PN: GP4201F1
$135.00
PN: GP4204
$189.00
PN: GP4209
$225.00
METAL CUTTING TOOLS
Air Nibbler (push type)
Air Body Saw
9.5 MM Stroke Length Cuts 1.6 MM mild steel
PN: GP9301
$185.00
Metal Shear Pistol GripFree Speed: 2500 SPM
Cuts 1.6 MM Mild Steel
PN: GP8201
$169.00
Punch and Flange ToolPunches 5 MM diameter hole
PN: GP9201
$185.00Cuts 1.2-1.6 MM mild steel
PN: GP9101
$159.00
1/4” Medium Die Grinder
Collet Size: 1/4” Free Speed: 22,000 RPM Weight: 0.675 Kg
1/4” Compact Die Grinder Kit Free Speed 22,000 RPM c/w Stones in polymer Case
PN: GP2202
$69.00
PN: GP2201K
$69.00
GRINDERS
3” Cut Off Grinder
Free Speed: 22,000 RPM Weight: 0.75 Kg
PN: GP3201
$98.00
1/4” Right Angle Die Grinder
Collet Size: 1/4” Free Speed: 18,000 RPM Weight: 0.833 Kg
1/8” Micro Die Grinder Kit
Free Speed: 55,000 RPM c/w Stones in polymer Case
PN: GP2203R
$138.00
PN: GP2204K
$169.00
Quality Bi-metal Metal Blades
18 TPI of 5 Pack
24 TPI of 5 Pack
32 TPI of 5 Pack
$25.00 Pkt
PT301A18
PT301A24
PT301A32
3”Inline Cut-off Grinder
PN: GP3203
$169.00
Includes one cut-off disc. Free Speed: 18,000 RPM Length: 225 MM
AIR TOOLS 12 Months Factory Warranty
Page 15 - Air Tools
HYDRAULIC RIVETERS3/16” Air / Hydraulic Riveter Gun Kit PN: GP1121D
$229.00
Heavy Duty Air/Hydraulic Riveter
Sizes: 9/32”, 1/4”, 3/16” & 5/32”
PN: GP6304
$599.00
GREASE GUN
Air and manual grease gun
Takes standard 500 CC cannisters
PN: GP1081D
$115.00
VACUUM GUN KITWonder Gun Kit
c/w Bag, Hose and Extra Nozzles. Blows and Sucks
PN: GPA0206KB
$69.00
3/8” Ratchet Wrench Heavy Duty Max Torque: 75 Ft/lbs
1/2” Ratchet Wrench Heavy DutyMax Torque: 75 Ft/lbs
PN: GP5203
$138.00PN: GP5204
$138.00
1/2” Impact Wrench Kit Max Torque: 260 Ft/lbs Includes 5-1/4 Inch Extension, Tool Oiler, 9, 10, 11, 13, 14, 17, 19, 22, 24, 27 MM sockets.
PN: GP504K
$139.00
WRENCHES
ANGLE GRINDERS4” Compact Angle Grinder Disc Size: 4” (100 MM) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.6 Kg
4” Heavy Duty Disc Size: 4” (100 MM) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.95 Kg
5” Heavy Duty Disc Size: 5” (125 MM) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.82 Kg
PN: GP8101
$149.00
PN: GP8102
$229.00
PN: GP31003
$259.00
1/2” Impact WrenchMax Torque: 500 Ft/lbs Nett Weight: 2.0 Kg
3/4” Impact WrenchMax Torque: 1100 Ft/lbs Nett Weight: 3.48 Kg
PN: GP260T
$279.00PN: GP3125
$499.00
Compact Tyre Gauge• All metal Construction
Range: 0-160 PSI. Metering: Analog Units: PSI, KPA Inlet: 1/4 Male Output: Schrader valve
PN: GPATPG
$30.00
TYRE INFLATORS
Tyre Chuck with Flexible Hose
PN: GPATC2
$14.00
Deluxe Tyre InflaterMeasuring range: 0-160 PSI Units: PSI, KPA Output: Schrader valve
PN: GPA6200
$129.00
Digital Tyre Inflater
PN: GP1558-4
$199.00
Straight Dual Access Tyre Chuck• Internal serration
to grip tread
PN: GPA1570
$23.00
Dual Straight Tyre Water Chuck• Standard 15 MM garden hose fitting• Features internal serrations
to grip valve thread• Perfect for water inflation
of tractor tyres
PN: GPA1570W
$28.00NEW!
Page 16 - Air Tools
12 Months Factory Warranty
Air Chipping Hammer
®
1” HD Impact Wrench
Needle Scaler
Impact Wrenches
AIR TOOLS
Heavy Duty Chipping Hammer with Side Exhaust Stroke: 102 MM Blows/Min: 1500 BPM Length: 350 MM Weight: 9 Kg
PN: KP4735S3H
$699.00
CHISELS
25 MM Flat Chisel to suit KP4735SH for scraping, peeling spot welds etc. Shank Diameter: 14.5 MM AF Hex Length: 260 MM
25 MM Moil Point Chisel to suit KP4735SH for breaking up concrete. Shank Diameter: 14.5 MM AF Hex Length: 260 MM
PN: KPAC10021AH
$55.00
PN: KPAC10022AH
$55.00
Grease GunManual Grease Gun Capacity: 80 CC
PN: KPAC050
$29.00
HEAVY DUTY NEEDLE SCALERBlows / Min: 3,700 BPM Overall Length: 350 mm 19 Needles Ø3 x 180 mm
PN: KP4722P
$325.00
Heavy Duty Air Caulking Gun
PN: KP4613
$219.00
Takes standard 400, 500, 600, 800 ml (50 MM) sachets. Recommended air pressure: 45-90 PSI Length: 550 MM Weight: 0.9 Kg
1/2” Compact Impact WrenchFree Speed: 10,000 RPM Max Torque: 200 Ft/lbs Nett Weight: 1.35 Kg
Super Compact 1/2” Impact Wrench Length: 120 mm Free Speed: 10,000 RPm Max Torque: 450 ft/lbs Nett Weight: 1.55 Kg
1/2” Impact WrenchImpact Wrench Free Speed: 6,800 RPM Max Torque: 500 Ft/lbs Nett Weight: 2.80 Kg
1/2” Super Duty Angle Impact
Jumbo Single Hammer Free Speed: 8,000 RPm Max Torque: 200 ft/lbs Nett Weight: 1.90 Kg Overall Length: 342 mm
3/4” Heavy Duty Impact WrenchFree Speed: 5,500 RPm Max Torque: 1100 ft/lbs Nett Weight: 5.6 Kg
3/4” Heavy Duty Impact Wrench
Free Speed: 6,500 RPM Max Torque: 750 Ft/lbs Nett Weight: 4.55 Kg
1” Super Duty Impact WrenchFree Speed: 5,000 RPm Max. Torque: 1,800 Ft/Ibs Weight: 7.10 Kg
1” Super Duty Impact Wrench
1” Sq Drive SUPER DUTY Twin Hammer - High Torque Max Torque: 1400 Ft/lbs Length: 315 mm Nett Weight: 6.0 Kg
PN: KP1012J
$199.00
PN: KP1469
$296.00
PN: KP1018
$299.00
PN: KP1475
$389.00
PN: KP1030
$799.00
PN: KP1023
$550.00
PN: KP1838A-P
$1,100.00
PN: KP1835
$1,050.00
6” Extended
Anvils Available.
6” Extended
Anvils Available.
Free Speed: 3,000 RPM Max Torque: 2500 Ft/lbs Nett Weight: 15.8kg
PN: KP1045K
$1,849.00
Purchase a 1” Heavy Duty Impact Wrench and receive a FREE set of 1” Metric or Imperial Sockets Valued at $339!
FREE SOCKET SET!
Valued at $339!
RUNOUT PRICE!
Heavy Duty Air Hydraulic RiveterIncludes 5/16”, 1/4”, 7/32”, 3/16” anvils & tie Rods.
Pulling Power: 1723 Kg Stroke: 22.5 MM Air Inlet: 1/4” Weight: 1.88 Kg
PN: KP4210VK
$655.00
Air Hydraulic Nutsert GunPulls up to M12 in stainless Rivet Cap: M3, 4, 5, 6, 8, 10, 12 Pulling Power: 4800 lbs Length: 278 MM Nett Weight: 1.8 Kg
PN: KP4251MK
$1,799.00
NEW!
See page 19 for metric and imperial socket sets.
Page 17 - Air Tools
Double Ended Punches
Prick punch PN: ST32R00-1
For slight accurate spot mark for layout and measuring. Centre Punch for deep indentation in most materials.
1/32” & 2/32 Combo Punch PN: ST32R12-1
For countersinking or setting finish nails.
2/32” Nail Starter and Nail Set Combo. PN: ST32R42-1
Designed to start & guide nails or wire brads into any surface. Ideal for tight spaces where a hammer wouldn’t fit
Single Ended Punches
High Speed Steel Centre Punch PN: ST28R45-1
Designed to mark Ultra Hard materials. The tip can be sharpened without losing its RC65 Hardness.
5/16” Self Centering Centre Punch PN: ST38R04-1
Creates perfectly centered holes in brackets, hinges and other beveled surfaces.
Two Speed Drill3/8” Super Duty Two Speed DrillFree Speed: 2,800 RPM Nett Weight: 0.84 Kg
PN: KP5302
$169.00
® AIR TOOLS 12 Months Factory Warranty
1/4” Through Ratchet Kit
PN: KP2219
$259.00
Complete with 10 Sockets, 3/8” square adapter & blow mound case.
Max Torque: 30 ft/lb Nett Weight: 0.6 Kg
Dual Action Mini Sander3” Pistol Grip Mini Sander 2 Speed c/w Velcro Pad Weight: 0.50 Kg
Two Speed Air Sander c/w 50 MM & 75 MM Backing Pad Free Speed: 15,000 RPM Weight: 0.45 Kg
PN: KP6628
$189.00 PN: KP6712
$148.00
Disc Sanders
Grinders1/4” Mini Die Grinder Free Speed: 30,000 RPM Nett Weight: 0.52 Kg
2 1/2” Super Duty Grinder Free Speed: 14,000 RPM Nett Weight: 1.40 Kg
PN: KP6226
$169.00
PN: KP6970SL
$392.00
SPRING 5 PIECE AUTOMOTIVE SET5 Assorted Punches and Chisel for automotive applications
Includes: HSS Centre Punch, Prick and Centre Punch,Self Centering Centre Punch, Cold Chisel Ping Dent Hammer & Carry Case
SPRING 4 PIECE MEDIUM PUNCH SET4 Medium Pin Punches for removing drift pins, roll pins, clevis pins, spring pins, dowel pins and more. Includes carry case.
Punch Sizes: Tip Dia.: 1/16”, 3/32”, 1/8” & 5/32” Tip Length: 1 3/8”
PN: ST50X08
$89.00
PN: STPPM503
$78.00
Ideal for easy centre punching steel, counter sinking nails or for removing drift pins, roll pins and more. This professional range of spring tools generate 3500 lbs of striking impact and are about the size of a ballpoint pen. MADE IN THE
MADE IN THE U.S.A.
$24.00 EA
$24.00 EA
2 PIECE PAINT PRO SET2 Piece Paint Pro Set painters kit for precise countersinking of nails. Also includes door pin removal tool (also knocks door pins back in).
Includes: • Hammerless Combination 1/32” and 2/32” Nail Set • Hammerless door pin removal tool
PN: STPM407
$29.00
Rubber Grips to suit spring tools (Spring Tool not included)
PN: STGRIPS
$2.00 EA
Sizes: Metric 8, 10, 12, 13, and 14 MM Imperial 5/16, 3/8, 7/16, 9/16 & 1/2”
1” Super Duty Impact WrenchFree Speed: 5,000 RPm Max. Torque: 1,800 Ft/Ibs Weight: 7.10 Kg
1” Super Duty Impact Wrench
1” Sq Drive SUPER DUTY Twin Hammer - High Torque Max Torque: 1400 Ft/lbs Length: 315 mm Nett Weight: 6.0 Kg
PN: KP1838A-P
$1,100.00
PN: KP1835
$1,050.00
CLEAN UP TOOLS
Page 18 - Clean Up Tools
Air Engine Cleaner(Kero Gun)
PN: GPA034
$69.00
Engine CleanerSuction Type c/w Hose
PN: GPA1565
$39.00
Magnetic Round Tray150 MM Diameter Rubber Backed to prevent scratching. A great way to keep small parts together while working.
PN: MRT001
$16.00
MAGNETIC BROOMMagnetic Broom. Great for picking up small metal objects from the workshop floor. The broom also has a quick slide release on the telescopic handle.
Lifts up to 9 Kg (20 lbs) Width: 377 MM
PN: MB001
$119.00
PICK UP WANDTelescopic Magnetic Pick Up Wand Length: 168 MM to 900 MM Capacity: 4.50 Kg PN: MTP001
$14.00
CLEAN UP WANDMagnetic Clean up Wand Lifting Capacity: 6.30 Kg Length 400 MM Weight 0.470 Kg
PN: MW001
$75.00
HAAGA 400 Series SweepersTwice the sweeping capability in one pass
The Haaga 477 & 497 models have an additional fine particle roller brush that is mounted behind the circular brushes.
Very low dust through intelligent air flowBoth machines are also equipped with two special fine particle filters. The dusty air is cleaned by these filters and returned to the sweeping circuit.
HAAGA 200 Series SweepersOne of a kind brush system
Unlike other sweeping brush devices the Haaga 225 sweeper relies on it’s patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. Coarse or fine debris are not run over or pushed around in front of the sweeper.
400 Series Commercial Sweeper Cleaning Width: 770 MM Performance: 2,900 M2/h Capacity: 50 Liters Weight: 13 Kg (empty)
PN: HG477
$899.00
200 Series Commercial Sweeper Cleaning Width: 550 MM Performance: 1600 M2/h Capacity: 25 Liters Weight: 6 Kg (empty)
PN: HG255
$449.00
Effortlessly sweep up fine and coarse dirt, from sand to cans, wet leaves, be it dry or wet.
The disc brushes, which protrude on both sides ensure even greater sweeping performance
Easy operation & long service, life thanks to it’s belt-less drive system.
Additional guide rollers for easy sweeping along curbs and walls.
The infinitely variable height adjustment ensures optimal performance on various types of surfaces.
Space-saving storage, store vertically without losing any of the collected material.
Features an automatic height adjustment 400 Series Commercial Sweeper Cleaning Width: 970 MM Performance: 3,600 M2/h Capacity: 50 Liters Weight: 15 Kg (empty)
PN: HG497
$1090.00
Ideal cleaning solution for workshops, warehouses, factories and parking areas.
A one of a kind brush systemUnlike other sweeping brush devices, Haaga sweepers rely on there patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. The coarse or fine debris is not run over or pushed around in front of the sweeper.
1 YEARC O M M E R C I A LW A R R A N T Y
2 YEARD O M E S T I CW A R R A N T Y
AIR ACCESSORIES
Page 19 - Clean Up Tools
IMPACT UNIV. JOINTS3/8” Drive Universal Joint Overall Length 50 mm
1/2” Drive Universal Joint Overall Length 63 mm
3/4” Drive Universal Joint Overall Length 90 mm
PN: GX38U
$19.00
PN: GX12U
$22.00
PN: GX34U
$39.00
5 PIECE ADAPTER SETS
5 Piece Std Adapter Set Chrome Vanadium
1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male
5 Piece IMPACT Adapter Set Chrome Molybdenum
1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male
PN: GX5AS
$23.00PN: GXIA5
$35.00
WOBBLE IMPACTING BAR SETS1/4” Wobble Extension Bar Set 4 Piece Includes: 3”, 6”, 10” & 12” bars
3/8” Wobble Extension Bar Set 4 Piece Includes: 3”, 6”, 10” & 18” bars
1/2” Wobble Extension Bar Set 4 Piece Includes: 3”, 5”, 10” & 18” bars
PN: GXWEBS14
$43.00
PN: GXWEBS38
$49.00
PN: GXWEBS12
$59.00
Made from Chrome Molybdenum Steel CR-MO.
3/8” DRIVE
3/8” 8 Piece Metric Socket Set Sizes: 8, 10, 11, 12, 13, 15, 17, 19 mm
3/8” 8 Piece Imperial Socket Set Sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”
1/2” DRIVE
1/2” 13 Piece Metric Socket Set Sizes: 10, 12, 13, 14, 15, 17, 18, 19, 21, 22, 24, 27 and 30 mm
1/2” 13 Piece Imperial Socket Set Sizes 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,15/16, 1, 1-1/16, 1-1/8, 1-1/4”
3/4” DRIVE
3/4” 8 Piece Metric Socket Set Sizes: 26, 27, 29, 30, 32, 35, 36 and 38 MM
3/4” 8 Piece Imperial Socket Set Sizes 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 and 1-1/2”
PN: GX838SSM
$59.00
PN: GX838SSI
$59.00
PN: GX1312SSM
$129.00
PN: GX1312SSI
$129.00
PN: GX834SSM
$159.00
PN: GX834SSI
$159.00
1” DRIVE
1” 9 Piece Metric Socket Set Sizes 24, 27 ,30, 32, 33, 36, 38, 41 and 46 mm
1” 9 Piece Imperial Socket Set Sizes 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8 and 2”
PN: GX91SSM
$339.00
PN: GX91SSI
$339.00
SOCKET SETS
1/2” DRIVE HEX BIT SET
Made from SNCM 8660 Steel which allows 20% more torque than CR-MO.
1/2” 8 Piece Imperial Hex Bit Socket Length 60 mm Sizes: H5, H6, H8, H10, H12, H14, H17, H19 mm
1/2” 8 Piece Imperial Hex Bit Socket Length 78 mm Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”
PN: GX12HBSM
$69.00
PN: GX12HBSI
$69.00
SPIN EXTENSIONSThe ergonomic roller-bearing grab handle protects your hand from friction burns, burs and”glove grab”. It’s use also helps to balance heavy impact tools. The aluminum alloy handle is permanently mounted on the CrMo extension.
1/2” Spin Extension Length 8”
3/4” Spin Extension Length 10”
PN: GX12SE
$39.00
PN: GX34SE
$69.00
Made from Chrome Molybdenum Steel CR-MO.
Molybdenum Steel CR-MO.
Meet or exceed DIN & ANSI standards.
AIR ACCESSORIES
Page 20 - Clean Up Tools
IN-LINE REGULATORS1/4” Male to 1/4” Female
1/4” NPT Male to 1/4” NPT Female
1/4” External Thread.
Japanese Compatible Coupling
1/4” Internal Thread
Japanese Compatible Coupling
PN: GPA1010
$14.00
PN: GPA1011
$14.00
PN: GPA1012
$14.00
Swivel Connector
1/4” NPT Male to 1/4” NPT Female
PN: GPA9100A
$22.00
INLINE WATER SEPARATOR1/4” Inline Water Separator is an ideal solution for maintaining quality control when painting 2-Pack or oil based paints.
PN: GPA1512
$24.00
IN-LINE REGULATORS
FILTER REGULATOR & LUBRICATOR
DESCRIPTION PART NUMBER PRICE
1/4” mini control unit THBC202 $59.00
1/4” control unit THBFLR802 $85.00
3/8” control unit THBFLR803 $85.00
1/2” control unit THBFLR804 $85.00
FILTER REGULATOR
DESCRIPTION PART NUMBER PRICE
1/4” mini filter reg THBFR212 $59.00
1/4” filter regulator THBFR802 $55.00
3/8” filter regulator THBFR803 $55.00
1/2” filter regulator THBFR804 $55.00
1/4” Regulatorc/w gauge (No Filter)
PN: THBR202
$39.00
Spare parts are available for all Geiger filter regulators.
FILTER REGULATORS
3/4” Filter RegulatorIntegrated Auto Drain
1” Filter RegulatorIntegrated Auto Drain
PN: THBFR926A
$229.00
PN: THBFR928A
$229.00
Premium Compressor Oil 1 LitreProtect your compressor and extend service life with Geiger Premium Compressor Oil.
PN: COMPOIL1
$19.00
3/8” Air Hose Reel• Brass swivel points• Polyurethane braided hose• Sheet metal housing• Wall MountableHose Size: 12 Metre x 11 mm ID
PN: GPHR1012
$269.00
Manual Hose Reel• High quality Polyurethane braided hose• Space Saving Foldable Handle• 360 degree swivel baseIncludes wall hanging bracket.Hose Size: 20 Metre x 11 mm ID
PN: GPHR1220
$269.00
ROTARY COUPLINGS1/4” Male Rotary CouplingRange: 22 °
3/8” Male Rotary CouplingRange: 22 °
PN: B05
PN: B07 $14.00 EA
1/2” Filter(No Regulator or Gauge)
PN: THBF804
$45.00
AIR ACCESSORIES
Page 21 - Clean Up Tools
MANIFOLDS
2 Way Cluster Quick Coupler
3 Way Cluster Quick Coupler
PN: GPA1513
$24.00PN: GPA1514
$28.00
4 Way Inline Manifold Bare
3 Way Inline Manifold Bare
2 Way In-line Manifold Bare
PN: GPATA4
$13.00
PN: GPATA3
$12.00
PN: GPATA2
$11.00
2 Way Cluster Manifold Bare
3 Way Cluster Manifold Bare
PN: GPAYA2
$11.00PN: GPAYA3
$12.00
2 Way In-line Quick Coupler
3 Way In-line Quick Coupler
4 Way In-line Quick Coupler
PN: GPA1515
$24.00PN: GPA1516
$28.00PN: GPA1517
$32.00
AIR BLOW GUN & DUSTERS
Air blower gunFeatures integrated 2 metre air hose.
PN: GPB90K
$49.00
Pocket Blow GunRoll Throttle (on - off) Nitto Compatible Length: 114 mm
PN: PBG-N
$13.00
3/8” High Flow Blow Gun Kit (All Metal)Japanese compatible fitting.
Kit includes:
• High Flow Duster• Easily Adjustable High
Flow Nozzle.• Heavy Duty High
Flow Nozzle• Standard Nozzle.
PN: GHF60AS
$46.00
10 mm FITTED AIR HOSE AIR HOSE CONNECTION KIT
10 mm One Touch Coupling Fittings for Air HoseIncludes 2 x hose clamps
12 mm One Touch Coupling Fittings for Air HoseIncludes 2 x hose clamps
PN: AHPACK
$22.00PN: AHPACK12
$27.00
10 mm RECOIL HOSE 2 Metre Recoil Hose
5 Metre Recoil Hose
6 Metre Recoil Hose
8 Metre Recoil Hose
PN: GPH1003LBHL
$45.00
PN: GPH1006LBHL
$49.00
PN: GPH1008LBHL
$55.00
PN: GPH1010LBHL
$59.00
5 Metre Recoil Hose
6 Metre Recoil Hose
8 Metre Recoil Hose
10 Metre Recoil Hose
PN: GPH1206LBHL
$55.00
PN: GPH1208LBHL
$59.00
PN: GPH1210LBHL
$69.00
PN: GPH1212LBHL
$79.00
12 mm RECOIL HOSE
6.5 mm ID/10 mm OD c/w Japanese compatible One Touch couplings.
8 mm ID/12 mm OD c/w Japanese compatible One Touch couplings.
20 Metre Fitted Air HoseAir Hose Size: 10 mm ID c/w Japanese compatible One Touch couplings.
30 Metre Fitted Air HoseAir Hose Size: 10 mm ID c/w Japanese compatible One Touch couplings.
PN: AH1020F
$49.00PN: AH1030F
$69.00
12 mm FITTED AIR HOSE
20 Metre Fitted Air HoseAir Hose Size: 12 mm ID c/w Japanese compatible One Touch couplings.
30 Metre Fitted Air HoseAir Hose Size: 12 mm ID c/w Japanese compatible One Touch couplings.
PN: AH1220F
$79.00PN: AH1230F
$105.00
For over 50 years Morrisflex has provided optimum solutions for aerospace, automotive, shipbuilding, metal fabrication & welding sectors worldwide. Morrisflex has been committed to providing our customers with high performance products that maximise productivity and reduce costs. Morris Flex is accredited to ISO9001: 2008 and is equipped with the latest CNC technology delivering product of unrivaled quality and consistency.
Standard & Special Carbide Burrs
Made in Europe.
Oval ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 3/8” 2” CBSE1 $30.00
3 3/8” 5/8” 2 3/8” CBSE3 $39.00
5 1/2” 7/8” 2 5/8” CBSE5 $55.00
Ball Nosed Tree ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSF1 $30.00
3 3/8” 3/4” 2 1/2” CBSF3 $29.00
5 1/2” 1” 2 3/4” CBSF5 $55.00
Pointed Tree ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSG1 $30.00
3 3/8” 3/4” 2 1/2” CBSG3 $46.00
5 1/2” 1” 2 3/4” CBSG5 $55.00
Cylinder ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSA1 $30.00
3 3/8” 3/4” 2 1/2” CBSA3 $39.00
5 1/2” 1” 2 3/4” CBSA5 $55.00
Cylinder Shape with End CutHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSB1 $30.00
3 3/8” 3/4” 2 1/2” CBSB3 $39.00
5 1/2” 1” 2 3/4” CBSB5 $55.00
Radius Ended Cylinder ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSC1 $30.00
3 3/8” 3/4” 2 1/2” CBSC3 $39.00
5 1/2” 1” 2 3/4” CBSC5 $55.00
Ball ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 3/16” 2” CBSD1 $30.00
3 3/8” 5/16” 2 1/8” CBSD3 $39.00
5 1/2” 7/16” 2 1/4” CBSD5 $55.00
Flame ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 9/16” 2 3/4” CBSH1 $30.00
3 3/8” 3/4” 2 1/2” CBSH3 $49.00
5 1/2” 1 1/4” 3” CBSH5 $72.00
Ball Nosed Cone ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSL1 $30.00
3 3/8” 1 3/16” 3” CBSL3 $46.00
5 1/2” 1 1/4” 3” CBSL4 $55.00
Cone ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 1/2” 1 7/8” CBSM1 $30.00
3 3/8” 5/8” 2 1/2” CBSM4 $55.00
5 1/2” 7/8” 2 3/4” CBSM5 $55.00
Inverted Cone ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 5/16” 2” CBSN1 $30.00
3 3/8” 3/8” 2 1/8” CBSN3 $46.00
5 1/2” 1/2” 2 1/4” CBSN5 $55.00
60° Countersink ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 3/16” 2” CBSJ1 $30.00
3 3/8” 5/16” 2 1/4” CBSJ3 $39.00
5 1/2” 7/16” 2 3/8” CBSJ5 $55.00
90° Countersink ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 1/8” 2” CBSK1 $30.00
3 3/8” 3/16” 2 1/8” CBSK3 $39.00
5 1/2” 1/4” 2 1/8” CBSK5 $55.00
Standard 1/4” Shank Carbide Burrs
Standard & Non-ferrous 1/4” Shank Carbide Burrs are available in three head diameters.
Page 22 - Air Tool Accessories
Size 1
Size 3
Size 5
1/4”
3/8”
1/2”
Page 23 - Air Tool Accessories
NF Cylinder ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSA1NF $46.00
3 3/8” 3/4” 2 1/2” CBSA3NF $46.00
5 1/2” 1” 2 3/4” CBSA5NF $72.00
NF Pointed Tree ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSG1NF $46.00
3 3/8” 3/4” 2 1/2” CBSG3NF $55.00
5 1/2” 1” 2 3/4” CBSG5NF $72.00
NF Cone ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
3 3/8” 5/8” 2 1/2” CBSM4NF $72.00
NF Ball ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 5/16” 2” CBSD1NF $46.00
3 3/8” 5/16” 2 1/8” CBSD3NF $75.00
5 1/2” 7/16” 2 1/4” CBSD5NF $72.00
NF Radius Ended Cylinder ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSC1NF $46.00
3 3/8” 3/4” 2 1/2” CBSC3NF $45.00
5 1/2” 1” 2 3/4” CBSC5NF $72.00
NF Ball Nosed Tree ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSF1NF $46.00
3 3/8” 3/4” 2 1/2” CBSF3NF $55.00
5 1/2” 1” 2 3/4” CBSF5NF $72.00
NF Ball Nosed Cone ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 11/16” 2” CBSL1NF $46.00
3 3/8” 1 3/16” 2 1/2” CBSL3NF $55.00
5 1/2” 1 1/4” 2 1/2” CBSL4NF $72.00
NF Oval ShapeHead S ize
Head Dia
Head Length
Overal l Length PN Price
1 1/4” 3/8” 2” CBSE1NF $46.00
3 3/8” 5/8” 2 3/8” CBSE3NF $55.00
5 1/2” 7/8” 2 5/8” CBSE5NF $72.00
1/4” Extended Shank Burrs
Non-ferrous 1/4” Shank Carbide Burrs
Carbide Burr Sets
Ball Nosed Tree ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6 3/4”
PN: CBSF3L6 $59.00
Pointed Tree ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6 3/4”
PN: CBSG3L6 $59.00
Ball Nosed Cone ShapeHead Dia: 3/8”Head Length: 1 1/5”Overall Length: 6”
PN: CBSL3L6 $59.00
F G L
1/8” Head Carbide Burr 10 Piece Set
Shank Dia: 1/8”
3/8” Head Carbide Burr 3 Piece Set
Shank Dia: 1/4”
1/4” & 3/8” Head Burr 8 Piece Set
Shank Dia: 1/4”
1/2” Head Carbide Burr 5 Piece Set
Shank Dia: 1/4”
3/8” Head Non-ferrous Burr 3 Piece Set
Shank Dia: 1/4”
3/8” Head Stainless Burr 3 Piece Set
Shank Dia: 1/4”
PN: CBSET10
$139.00PN: CBSET3
$110.00PN: CBSET8
$229.00PN: CBSET5
$255.00PN: CBSET3NF
$135.00PN: CBSET3INOX
$129.00
Cylinder ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6 3/4”
PN: CBSA3L6 $59.00
Cylinder Shape with End CutHead Dia: 3/8”Head Length: 3/4”Overall Length: 6”
PN: CBSB3L6 $59.00
Radius Ended Cylinder ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6”
PN: CBSC3L6 $59.00
Ball ShapeHead Dia: 3/8”Head Length: 1/3”Overall Length: 6”
PN: CBSD3L6 $59.00
Oval ShapeHead Dia: 3/8”Head Length: 5/8”Overall Length: 6 5/8”
PN: CBSE3L6 $59.00
A B C D E
F
G
LE
B
C
D
A
NEW!
Page 24 - Air Tool Accessories
HB Small Short Bin105W mm x 137D mm x 76H mm
PN: HB210B PN: HB210R
HB Small Bin105W mm x 187D mm x 76H mm
PN: HB220B PN: HB220R
$3.95 EA
$4.35 EA
HB Medium Bin140W mm x 276D mm x 127H mm
PN: HB230B PN: HB230R
HB Medium Duplex BinC/W C’Board 279W mm x 276D mm x 127H mm
PN: HB235B PN: HB235R
$9.00 ea
$13.00 ea
HB Large Short Bin210W mm x 273D mm x 178H mm
PN: HB239B PN: HB239R
HB Large Duplex BinC/W C’Board 420W mm x 375D mm x 178H mm
PN: HB250B PN: HB250R
$14.00 ea
$23.00 ea
New HB Series Heavy Duty Storage Bins are a versatile solution that adapts to your changing storage requirements. HB bins can be used as free standing bench storage, wall mounted storage units or on a mobile storage cart. The new design can take very high load when stacked (100 plus kilograms). Each HB bin comes with 4 Legs included.
Now you can make your HB bins mobile with this hanging display unit. With caster wheels (2 with brakes). This is an excellent time and space saver for any workshop.
Take only what you need to the job, while keep items oganised. HB Bins are easily detached from the to cart.
Model - MS20020K
MOBILE STORAGE CART
Heavy Duty Display Kit Galvanised Steel
Overall Size: 740W mm x 560D mm x 1460H mm
C/W: 72 x HB220B / HB220R 32 x HB230B / HB230R
$799.00
Hanging Panels (set of 2) C/W screws & wall plugs 605W mm x 455H mm x 8D mm
Hanging Panel Kit Set of Hanging Panels, 40 x HB210 Bins C/W Screws and wall plugs.
SERIOUS STORAGESYSTEMS
Model - HD530HD 30 Drawer Steel Parts Cabinet880W mm x 400D mm x 880H mmDrawer size: 160W mm x 110H mm x 410D mm
Model - HD318HD 18 Drawer Steel Parts Cabinet550W x 400D x 880H mm
Drawer Size: 160W mm x 110H mm x 410D mm
Model - HD515HD 15 Drawer Steel Parts Cabinet880W x 400D x 440H mmDrawer size: 160W mm x 110H mm x 410D mm
$599.00
$499.00
$455.00
HD Steel Parts CabinetsHD cabinets take up to 100 kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant. The front face of each drawer features a window which makes it easy to identify the contents.The 60 drawer NHD560 takes
up to 600 Kg total weight and up to 100 Kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant. The window front makes it easy to identify the contents.
410 MM
160 MM
110 MM
HD Drawer size:
Model - NHD560HD 60 Drawer Steel Parts Cabinet880W x 400D x 1725H mm
$1295.00
HD Steel Parts Cabinets
HB Series Heavy Duty Multi-Function Storage Bins
PN: HP1KITB HP1KITR
$169.00 EA
PN: HP1
$59.00
HB Mobile Storage Cart
HB Storage Bin Hanging Panels
Page 25 - Air Tool Accessories
Model - DU118MLockable Steel Door Storage Cabinet1180W mm x 400D mm x 880H mm
$599.00 Model - DU118GLockable Glass Door Display Cabinet1180W mm x 400D mm x 880H mm
$599.00
Lockable CabinetsPerfect for the showroom or where lockable storage is required.
Create more display areas in the showroom by adding a Glass Door Display Cabinet or a Steel Door Storage Cabinet.
Both cabinets feature key & combination pin lock, sliding doors for easy access in confined spaces and 2 adjustable shelves. Stack both cabinets together to raise the display cabinet to eye level.
Contents of cabinet not included.
Model - THD2SHeavy Duty Steel Lockable 3 Shelf Cabinet.880W mm x 400D mm x 880H mm
$799.00
Model - NHD53030 Drawer Parts Cabinet980W mm x 400D mm x 1010H mm(Including handle and caster wheels)
$869.00
Mobile Parts Cabinets
Model - A533636 Drawer A5 Parts Cabinet586W mm x 290D mm x 937H mm
Model - A532424 Drawer A5 Parts Cabinet586W mm x 290D mm x 640H mm
Model - A6330H30 Drawer A6 Parts Cabinet533W mm x 265D mm x 937H mm
Model - A6212H12 Drawer A6 Parts Cabinet362W x mm 265D mm x 571H mm
Model - A744848 Drawer A7 Parts Cabinet586W mm x 222D mm x 937H mm
Model - A732424 Drawer A7 Parts Cabinet444W mm x 222D mm x 642H mm
$499.00
$389.00
$459.00
$279.00
$499.00
$310.00
Model - A856060 Drawer A8 Parts Cabinet586W mm x 222D mm x 937H mm
Model - A843232 Drawer A8 Parts Cabinet466W mm x 222D mm x 642H mm
Model - ST246060 Drawer ST2 Parts Cabinet586W mm x 222D mm x 937H mmDrawer Size:120W mm x 210D mm x 55H mm
$499.00
$349.00
$499.00
Heavy Duty Parts Cabinets
A great range of professional parts cabinets for the workshop.The all metal frame is constructed from 0.8 mm galvanized steel.The moulded drawers are acid and oil resistant. All drawers come with 1 removable divider.
A7A6A5
A8ST2
LOCKABLE DOORS
Model - A7448DA7 Lockable 48 Drawer Parts Cabinet586W mm x 270D mm x 970H mm
Model - A7324DA7 Lockable 24 Drawer Parts Cabinet444W mm x 270D mm x 677H mm
699.00
525.00
HEAVY DUTY PARTS CABINETS
Hand Tools
3 Piece T-Handle Set1/4”, 3/8” and 1/2” Drive Chrome Vanadium
PN: GXTH3
$129.00
Page 26 - Hand Tools
HAND TOOLSSCREWDRIVER SETS42 Piece Precision Screwdriver SetSet Includes: Handle (20 teeth) & Flexible Extension
10 BIT ANGLE DRIVER SET
PN: GSDS
$49.00
PN: GPA1600
$29.00
21 Piece Magnetic Drive Guide SetIncludes: Phillips head (2 x #0, 1, 2) Hex Head (2 x #3,4,5) Flat head (1 x #5, 2) and Star head (2 x #0, 1, 2)
PN: GBS21
$12.00
49 Piece Bit Set.Set includes: Flat Head, Hex Head, Phillips Head, Star Head, Small Socket Set 5 MM to 11 MM, Magnetic Drive Unit and 5 x combination bits.
PN: GBS49
$19.00
Metric 9 Piece Ball Point Hex Key Wrench SetSizes: 1.5, 2, 2.5, 3, 4, 5, 6,8 & 10 mm
Imperial (SAE) 13 Piece Ball Point Hex Key Wrench SetSizes: 0.05”,1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, & 3/8”
Tamperproof 13 Piece Star Key Wrench SetSizes: T6H, T7H, T8H, T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H
Non Tamperproof 13 Piece Star Key Wrench SetSizes: T6H, T7H, T8H,T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H
PN: GXHK9M
$38.00
PN: GXHK13I
$38.00
PN: GXTP13
$45.00
PN: GXTX13
$45.00
4 Piece Hook &
Pick Set 61/4”Includes 1 x straight, 1 x 90°, 1 x Offset & 1 x Hook
PN: GXHP4
$29.00
14 Piece Gasket Punch SetSizes 1/4, 5/16, 3/8, 7/16 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 3/8, 1 1/2”
PN: GGPS
$65.00
Jumbo Metric 13 Piece Ball Point Hex Key Set
Set includes: 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14, 17, 19 MM Keys
Jumbo Imperial 13 Piece Ball Point Hex Key Set
Set includes: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4" Keys
$99.00 EAPN: GXHK34I
PN: GXHK19M
Made from Chrome Vanadium SteelSOCKET SETS1/4”43 Piece Chrome Vanadium Socket Set• 1/4” Drive Sockets: 4, 4.5, 5, 5.5, 6,
7, 8, 9, 10, 11, 12, 13 & 14 mm
• 1/4” Ratchet Handle 72 Gears• 1/4” Extension Bars 2” & 6”• 1/4” Spinner Handle• 1/4” Universal Joint• 3 Way Adapter• 1/4” Flexible Extension Bar• 1/4” Bit Socket (23 Pieces Torx T8,
T9, T10, T15, T20, T25, T27, T30, T40 PH 1, 2, 3 Slotted 4, 5.5, 6.5 Pozi 1, 2, 3 Hex H3, H4, H5, H6, H8
• Blow Mold Case
1/2” 56 Piece Chrome Vanadium Socket Set• 1/2” Drive Sockets sizes: 8, 10, 11,
12, 13,14, 15, 17, 18, 19, 22, 24, 27, 30, 32 mm
• 1/2” Ratchet Handle 72 Gears• 1/2” Extension Bars 5” & 10”• 1/2” Park Plug Socket 16 & 21 mm • 1/2” 3 Way Adapter• 1/2” Coupler x 10 mm Hex• 1/2” Bit Sockets 3 Piece
T50, T55, T60• 1/2” Bit Sockets: 31 Piece Torx bits:
T10, T15, T20, T25, T27, T30 PH 1, 2, 3, 4, Slotted 6.5, 8, 10, 12 Pozi 1, 2, 3, 4 Hex 4, 5, 6, 8, 10 TP T10, T15, T20, T25, T27, T30, T40, T45
• Blow Mold Case
PN: GP1599-5
$69.00 PN: GP1599-8
$119.00
Made from Chrome Vanadium Steel
Lang Tools represents hand tools that professional technicians and handymen have used for over 80 years, which assures that you are dealing with performance proven consumer preferred, professional high quality products. MADE IN THE
U.S.A.
Page 27 - Hand Tools
Quick Switch Ratchet Pliers with Automatic Lock and Tip Kit. Automatic ratchet lock feature keeps rings open or closed for easy installation and removal.
Ring Size Range
Metric Imperial
Internal 46 mm – 102 mm 1-13/16˝ – 4˝
External 32 mm – 102 mm 1-1/2˝ – 4˝
Tip Sizes
Metric SAE(Inch)
Bent 15° 2.3 mm, 2.7 mm, 3.0 mm 0.090˝, 0.108˝, 0.120˝
Bent 70° 2.3 mm, 2.7 mm, 3.0 mm 0.090˝, 0.108˝, 0.120˝
2 Piece Quick Switch Pliers with Automatic Lock and Tip Kits. Contains 1ea of L1421 and L1434 models c/w 5 prs of colour coded interchangeable tips and hex key for each.
Ring Size Range
Metric Imperial
Internal7 mm – 26 mm (L1421) 10 mm – 51 mm (L1434)
1/4” – 1” 3/8” – 2”
External3 mm: 26 mm (L1421) 7 mm – 51 mm (L1434)
1/8” – 1” 1/4˝ – 2˝
Tip Sizes L1421
Metric SAE(Inch)
L1421Straight 0.6 mm, 1.0 mm, 1.2 mm 0.023˝, 0.039˝, 0.047˝
Bent 90° 1.0 mm, 1.2 mm 0.039˝, 0.047˝
L1434Straight 1.0 mm 1.2 mm, 1.9 mm 0.039˝, 0.047˝, 0.074˝
Bent 90° 1.0 mm, 1.2 mm 0.039˝, 0.047˝
PN: L75
$119.00PN: L1450
$135.00
$139.00 EA
Retaining Ring PliersSpring ratchet locking mechanism securely holds against snap ring tension
Internal Retaining Ring PliersPN: L1485
Ring Sizes: 78 mm to 159 mm (3-1/16” to 6-1/4”) Tip size: Straight 3 mm (.120”)
External Retaining Ring PliersPN: L1486
Ring Sizes: 89 mm to 165 mm (3-1/2” to 6-1/2”) Tip size: Straight 3 mm (.120”)
PN: L279
$129.00
Features:
• Four Tools in One• Works on various single,
dual & quad piston callipers• Centrally distributes
force
• Compact design• 360 degrees ratchet
swing allows access at any angle
Working range: 40 mm - 64 mm
Length: 235 mm
Brake Calliper Ratchet Press
Spare Tips to Suit Ext. & Int. Ring PliersSpare tips available to suit (L1486) External and Internal (L1485) Ring Pliers:
Straight Tips to suit L1485/6 PN: L88600
45 Degree Tips to suit L1485/6 PN: L88645
90 Degree Tips to suit L1485/6 PN: L88690
$35.00 EA
12 PIECE COMBINATION INTERNAL / EXTERNAL SNAP RING PLIERS SET Slim profile tips for tight applications.
• Pliers are convertible for use on internal and external snap rings with cushioned grip handles
• Pliers have a knurled centre screw with spring for easy changing and secure hold
• Sets are packaged in a plastic blow molded case for protection and easy use
PN: L3495
$249.00
CONVERTIBLE RETAINING RING PLIERS• Convert between internal and external with a quick
flip of a switch• Eliminates the jaw aligning push-pin process• Double-dipped custom grip made of low-temp,
high-impact material
SET OF 2 SWITCHABLE RETAINING RING PLIERS• Spring return handles• Each pliers includes a tip kit containing durable alloy,
colour-coded interchangeable tips and hex key, all stored in a handy pouch
TIP SETSStrong and durable alloy steel tips. Includes 6 pairs of colour-coded, interchangeable tips, set screws and Hex.
TIP SET to suit L1421Pliers
TIP SET to suit L1434 Pliers
TIP SET to suit L75 Pliers
PN: L12
$35.00PN: L14
$35.00PN: L651590
$39.00
THE TAIL BONE
THE BONESTER
ROUGH RIDER
creepers & stools
One YearFACTORYWARRANTY
Made in the
U.S.A.
160 KGCAPACITY
180 KGCAPACITY
180 KGCAPACITY
180 KGCAPACITY
140 KGCAPACITY
160 MM PROFILE
191 MM PROFILE
114 MM PROFILE
The Tail Bone is a totally new approach to creeper seats, easier to use, more comfortable and rolls effortlessly over air hoses, drop cords, shop clutter and rough surfaces. The uniquely designed tripod base is a naturally stable working platform even on uneven floors and surfaces. The super comfortable bucket seat is shaped and sized for real-world people.
Mechanics Stool Ribbed Body740L x 800W MM
300 MM Seat HeightLoad Capacity: 160 Kg
Huge 130 MM Easy Rider Tyres20 MM Ground ClearanceWeight: 7 Kg
Rough Rider Mechanics Stool Ribbed Body740L x 800W MM
330 MM Seat HeightLoad Capacity: 180 Kg
Huge 130 MM Ø Rough Rider Tyres44 MM Ground ClearanceWeight: 7.5 Kg
PN: BONE5031
$299.00PN: BONE5131
$369.00
Mechanics Creeper1194L x 648W x 191H MM
Wheels: Ø130 MM x 33 MM widthRough Rider Rider Tyres73 MM Ground ClearanceWeight: 9.1 Kg
PN: BONE7031
$399.00
SUPER LOW PROFILEThe deep, smoothly molded structural ribs add incredible strength and durability without adding bulk & weight; providing welcome ventilation for those hot muggy days. Two inlayed hand-holds make it easy to carry and easy to secure against theft or serial tool borrowers.
Mechanics Creeper1092L x 594W x 114H MM
Wheels: Ø75 MM x 22 MM widthLoad Capacity: 180 Kg
Easy Rider Tyres38 MM Ground ClearanceWeight: 6 Kg
PN: BONE4031
$239.00
THE BONELOW PROFILE
Mechanics Creeper1194L x 648W x 160H MM
Wheels: Ø130 MM x 25 MM widthLoad Capacity: 180 Kg
Wide Easy Rider Tyres45 MM Ground ClearanceWeight: 8 Kg
PN: BONE6031
$349.00
The Bone™ and Bonester™ feature a uniquely shaped body which cradles the user between the wheels only an inch or so above the ground. The big, easy rolling wheels are positioned outboard to provide a strong, stable working platform that can’t tip or fl ip the user. The large diameter wheels roll easily over all sorts of obstacles such as cords and air lines.
The Rough Rider Wheels are designed for use on grass, gravel and dirt or anywhere the going is tough
ROUGH RIDER
The Easy Rider Wheels have soft tyres that grab and roll over frustrating shop clutter.
EASY RIDER
Page 28 - Hand Tools
HIGH PERFORMANCE DEBURRING TOOLS
Page 29 - Hand Tools
Telescopic Multifunction Deburring ToolMulti-Component Handle (GDSTSDMK) & blade holder Standard Deburring blades: GDSC10, GDSC15, GDSC20, GDSC30, GDSC35
Deburring Tool with 3 MC 3.2 mm blade3.2 mm Standard Quick Release Handle (GDSDSDMK) with Multi‑cutting Edge Deburring blades: GDSMC10, GDSMC20, GDSMC101
6 mm Heavy Duty Quick Release Deburrer
6 mm Heavy Duty Quick Release Handle (GDSRSDMK) with 6 mm General Purpose Blade (GDSR10S).
PN: GD38325
$38.00
PN: GDSRSDMKK
$30.00
Ergonomic Deburring Tool & Blade SetPromotional Quick Release Handle Set with 10 assorted 3.2 mm blades.Set Includes: 3.2 mm Standard Quick Release Handle (GDSDSDMK) Standard 3.2 mm Deburring blades: 2 x GDSC10, 2 x GDSC101, 2 x GDSC15, 2 x GDSC20, 1 x GDSC30, 1 x GDSC35
PN: GD88040
$34.00
24 Piece Deburring SetSet of Multi-Component and Quick Release Handles including a comprehensive range of accessories.
PN: GD88030
$220.00
Set includes: 3 Multi-Component Handles (GDSTSDMK) Heavy Duty 6 mm Quick Release Handle (GDSRSDMK),Micro Deburring blades: GDSP1, GDSP2, GDSP3Standard Deburring blades: GDSC10, GDSC101, GDSC15 GDSC20, GDSC30, GDSC35Heavy Duty Deburring blades: GDSR10S, GDSR15S
Telescopic Blade Holders GDSDTP, GDSDTC, GDSVT, GDSCSLONG, GDSKWDeburring Blades & Scrapers GDSV4, GDSKW9, GDSKW16 GDSCSLONG, GDSSCR6, GDSV2, GDSC12 blade holders 2 mm Hex Key
Double DeburrerDeburrs both sides of workpiece at same time. Double Deburrer features underneath safety guard.
PN: GDDB
$19.00
PN: GD38333
$29.00
Pack of 5 Hex handle Deburring ToolsSet of 5 3/8" Hex Handle Deburring Tools A/F Hex. Aluminium body handle with replaceable GDSC10 blades.
Pack of 10 Hex Handle Pocket DeburrersSet of 10 Hex Handle Pocket Deburrers. 8 mm Hex Aluminium body handle with Pocket clip & C-10 blade. Blade cannot be replaced.
PN: GD86060
$56.00PN: GD86110
$56.00
Double Deburrer blade setPN: GN80
$11.95
Hand Tools
Page 30 - Hand Tools
Bearing Separator
S45C Drop Forged hardened Bearing Separator.
Working Range: 0-370 mm Jaw Range: 75-105 mm
Gear Puller
Working Range: 0-185 mm
Set includes: Twin & Triple Leg Heads Hydraulic Ram (12 Ton capacity) Carbon Steel Beam 200 mm, 150 mm, & 100 mm arms 85 mm, 35 mm, Spacers 25 mm Centre Adapter
Multi-Hydraulic Gear Puller Kit
PN: GHPK
$499.00
Gear & Bearing Splitting Combination SetSmall Bearing Separator
Jaw Range: 30-50 mm Working Range: 0-135 mm
Large Bearing Separator
Jaw Range: 50-75 mm Working Range: 0-180 mm
Includes Centre Adapter.
S45C Drop Forged hardened Main Beam and Bearing Separators.
PN: GBTK
$189.00
Made in Japan.RIVETING TOOLS
Heavy Duty Air/Hydraulic Nutsert Tool This heavy duty tool is suitable for setting aluminium, steel and stainless steel nutserts from 4 mm to 10 mm. Manual nutsert release spindle.Includes: M4, M5, M6, M8, M10 mandrels, Weight: 1.5 kg
PN: SNAN800
$959.00
Heavy Duty Hand RiveterRiveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.
PN: SNPRO3000
$49.00
Aluminium & steel nutserts available in packs of 50.
Hand Operated Nutsert SetSet includes aluminium M4, M5, M6 & Steel M6 nutserts,M4, M5, M6 Mandrels and instructions.
Extra nutserts available in packs of 50
PN: SNSC456
$169.00Heavy Duty Long Nose 2-way Hand Riveter SN10000
$115.00
Lazy Tongs Heavy Duty Hand RiveterExtended Length: 860 mm Contracted Length: 310 mm Riveting sizes: 3.2, 4.0, 4.8 mm
SNSC50
$195.00
Long Handled Nutsert Tool• Sets nutserts into Aluminium & SteelIncludes: M4, M5, M6, M8, M10 Mandrels Weight: 1.5 kg
PN: SNHN096
$295.00
Riveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.
ENGINEERING EQUIPMENT
DIVIDERS & CALIPERS8” Divider
8” Inside Caliper
8” Outside Caliper
Spring Divider 12”
Inside Caliper 12”
Outside Caliper 12”
PN: FM0218
$24.00
PN: FM0238
$24.00
PN: FM0228
$24.00
PN: FM0912
$25.00
PN: FM1012
$25.00
PN: FM1112
$25.00
HOLLOW PUNCH SET6 Piece Hollow Punch Set Set includes: 5 MM, 6 MM, 8 MM, 9 MM, 11 MM, & 13 MM. PN: YC516
$25.00
Heavy Duty Parts Trolley
1.6 mm steel uprights. Max Load: 150 Kg 410W x 760D x 885H mm
Heavy Duty 3 Shelf Parts Trolley
3 Shelves, side container and drawer 1.6 mm steel uprights 470W x 785D x 825H mm
Heavy Duty Parts Trolley
Max Load: 200 Kg 500W x 873D x 880H mm
5 PIECE PIN PUNCH SETLength: 200 MM Sizes: 3.2, 4.8, 6.4, 8, 9.5 MM
PN: GPP5
$28.00
HEAVY DUTY TROLLEYS
PN: GT3S
$239.00PN: GT3SD
$279.00PN: CTH5086
$445.00
Takes Up To
100 Kg Per Shelf!Max Load
150 Kg!
Max Load
150 Kg!
Page 31 - Engineering Equipment
SCREW PITCH GAUGES
Metric & Whitworth Pitch GaugeRange: Whitworth 60° 4-62, Metric 55° 0.25-6 52 Leaves
Unified 60° Pitch GaugeRange: Metric 60° 4-42 TPI 30 Leaves
Unified 60° Pitch GaugeRange: Metric 60° 0.25-2.5 mm 28 Leaves
PN: FT163
$48.00PN: FT006
$38.00PN: FT156
$38.00
RADIUS GAUGESRange: 0.75 to 5 mm Increments: 0.25 mm
Range: 5.5 to 13 mm Increments: 0.5 mm
PN: FT272MA
$39.00
PN: FT272MB
$49.00
Pocket Depth GaugeRange: 0-50 mm
Welding Gauge MetricRange: 0-50 mm
PN: FTPDG50
$69.00
PN: FTNWG94
$94.00
MADE IN JAPAN
FEELER GAUGES 150 mm Feeler Gauge Set20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm
200 mm Feeler Gauge Set20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm
300 mm Feeler Gauge Set20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm
PN: GFG150
$22.00 PN: GFG200
$25.00PN: GFG300
$35.00
ENGINEERING EQUIPMENT
Page 32 - Engineering Equipment
NUMBER & LETTER PUNCHESEach set packed in a ABS-red strong plastic case. Made from S 55C High carbon steel, HRC 58~60 Degrees.
Kit includes: One Piece Type Holder, hexagon wrench, Steel types* 100 piece (A-Z, 0-9 ,& ,/ ,- , blank space). The holder can accommodate 9 pieces of our 3 MM steel types.
3 mm Punch Holder Set
6 mm Punch Holder Set
PN: GYC610-3
$399.00PN: GYC610-6
$499.00
36 Piece/4 mm Letter & Number Punch SetOTHER SIZES AVAILABLE
9 Piece/6 mm Number Punch SetOTHER SIZES AVAILABLE
PN: GYC607-4
$55.00
PN: GYC602-6
$32.00
WORK LAMPS
90 LED Magnifier Work Lamp90 Super Bright LED’s (Ø290 MM Array) Glass Lens 3 x Magnification (Ø120 MM) All metal frame construction 240V mains power (2 Metre Cord) Bench mounted up to 55 MM thickness.
PN: ML90
$169.00 VICESDrill Press Vice 4” Drill Press Vice 6” Drill Press Vice
ROUND VICEMachine Vice. Holds round workpieces. Reversible mount for smaller bar diameters.
ANGLE VICES60 MM Opening Welders Angle Vice
100 MM Opening Welders Angle Vice
8 Drill Press Vice
PN: TV102-4
$38.00PN: TV102-6
$68.00
PN: GVSR
$299.00
PN: TV274
$129.00PN: TV275
$179.00
PN: TV122-8
$299.00
4” Cross Vice 6” Cross Vice
PN: TV144-4
$110.00PN: TV144-6
$195.00
Halogen Lamp Medium Arm24 Volt/70W PN: AL101B
$139.00
240V to 24V TransformerTo Suit AL Halogen Lights (Safety Approved No. N16803) PN: AL24024
$79.00
Compact Halogen Lamp Halogen Lamp no arm 24 Volt/70W
PN: AL101C
$129.00
Halogen Lamp Medium Arm24 Volt/70W
PN: AL101A
$149.00
150 mm Plate ShearCuts up to 5 MM Mild Steel
PN: PS6
$235.00
ENGINEERING EQUIPMENT
Centre Drill Set5 Piece Centre
Drill SetSizes 1 to 5
3 Piece Double Spiral Step Drill Set4-12 MM, 4-20 MM, 4-32 MM HSS Tinite Coated
PN: GCDS
$32.00PN: G3SD
$139.00
Page 33 - Engineering Equipment
J6 MOUNT KEYLESS CHUCKSJ6 Mount Keyless 13 mm Drill Chuck.Range: 0 MM-13 MM.
J6 Mount Keyless 16 mm Drill Chuck.
Range: 3 MM-16 MM.
KEYLESS CHUCKS SPANNERSSpanner to suit a VKD102 Keyless Chuck J6 Mount.
Spanner to suit a VKD104 Keyless Chuck J6 Mount.
DRILL CHUCK ARBORDrill Chuck Arbor MT2 x J6
Drill Chuck Arbor MT3 x J6
Drill Chuck Arbor MT4 x J6
PN: VKD102
$110.00
PN: VKD104
$129.00
$16.00 EA
PN: VKD102SPANNER
PN: VKD104SPANNER
PN: DCAMT2J6
$19.00
PN: DCAMT3J6
$23.00
PN: DCAMT4J6
$32.00
KEYED CHUCKS
KEYED CHUCKS
J6 Mount Keyed 13 mm Drill ChuckCapacity: 2.5 MM-13 MM. Includes Key
J6 Mount Keyed 16 mm Drill ChuckCapacity: 2.5 MM-16 MM. Includes Key
PN: PORA13J6
$55.00
PN: PORAP16J6
$95.00
3/8” Mount LD 10 mm Keyless Drill Chuck
Capacity: 1.5-10 MM Mount: 3/8” x 24 TPI
1/2” Mount LD 10 mm Keyless Drill Chuck
Capacity: 1.5-10 MM Mount: 1/2” x 20 TPI
$59.00 EA
PN: PORLDP10F38R
PN: PORLDP10F12R
3/8” Mount LD 13 mm Keyless Drill Chuck
Capacity: 2-13 MM Mount: 3/8” x 24 TPI
1/2” Mount LD 13 mm Keyless Drill Chuck
Capacity: 2-13 MM Mount: 1/2” x 20 TPI
$74.75 EA
PN: PORLDP13F38R
PN: PORLDP13F12R
Made in Italy.SOLUBLE CUTTING OIL
1 Litre Soluble Cutting OilMix with water 1:10
5 Litre Soluble Cutting OilMix with water 1:10
SOLOIL1
$19.00
SOLOIL5
$69.00
STAINLESS HARDENED RULES150 mm Stainless Hardened Dual Scale Rule
300 mm Stainless Hardened Dual Scale Rule
PN: AS1015
$6.90
PN: AS1030
$13.80
HSS Cross Hole Countersink BitsMachined from High Speed Steel.
Size: 25-30 mm / 90° Shank Dia: 15 mm
Size: 30-35 mm / 90° Shank Dia: 15 mm
Size: 35-40 mm / 90° Shank Dia: 15 mm
Size: 40-50 mm / 90° Shank Dia: 18 mm
PN: GCS2530
$59.00
PN: GCS3035
$65.00
PN: GCS3540
$89.00
PN: GCS4050
$199.00
5 Piece HSS Cross Hole Style Countersink SetSizes include: 2-5, 5-10, 10-15, 15-20, 20-25 mm / 90°
PN: GCS5S
$129.0
HSS Counter Sink Set
3 Flute HSS Countersinking Bit SetTinite coated 12 Piece Set Sizes include: 2-25 mm / 90°
PN: GCS3F12
$169.00
LAST CHANCE LIQUIDATION SALE! LAST CHANCE LIQUIDATION SALE!
Page 34 - Engineering Equipment
PRICED TOMOVE!
35 mm Dial Bore GaugeRange: 18-35 mm Accuracy: ±0.01 mm
160 mm Dial Bore GaugeRange: 50-160 mm Accuracy: ±0.01 mm
250 mm Dial Bore GaugeRange: 160-250 mm Accuracy: ±0.01 mm
450 mm Dial Bore GaugeRange: 250-450 mm Accuracy: ±0.01 mm
1.5” Dial Bore GaugeRange: 0.7-1.5” Accuracy: ±0.0001”
6” Dial Bore GaugeRange: 2-6” Accuracy: ±0.0001”
16” Dial Bore GaugeRange: 10-16” Accuracy: ±0.0001”
RRP $89
Now $79 LOW STOCK!
PN: DBORGA18
RRP $149
Now $79 LOW STOCK!
PN: DBORGA50
RRP $189
Now $79 LOW STOCK!
PN: DBORGA160
RRP $189
Now $99 LOW STOCK!
PN: DBORGA250450
RRP $149
Now $79 LOW STOCK!
PN: DBORGA07
RRP $189
Now $79 LOW STOCK!
PN: DBORGA26
RRP $189
Now $79 LOW STOCK!
PN: DBORGA1016
150 mm Depth VernierRange: 0-150 mm Increments: 0.02 mm
200 mm Depth VernierRange: 0-200 mm Increments: 0.02 mm
300 mm Depth VernierRange: 0-300 mm Increments: 0.02 mm
6” Depth VernierRange: 0-6” Increments: 1/1000”
8” Depth VernierRange: 0-8” Increments: 0.001”
12” Depth VernierRange: 0-12” Increments: 0.001”
RRP $39
Now $25 LOW STOCK!
PN: DEPVER150
RRP $44
Now $25 PN: DEPVER200
RRP $55
Now $29 LOW STOCK!
PN: DEPVER300
RRP $39
Now $25 LOW STOCK!
PN: DEPVER6
RRP $44
Now $25 LOW STOCK!
PN: DEPVER8
RRP $55
Now $29 LOW STOCK!
PN: DEPVER12
DEPTH VERNIERS
COMBINATION SET SQUAREIncludes Square Head, Centre Head, Ruler and Protractor Head
RRP $110
Now $79 PN: MSETCOMB
DIGITAL DUAL SCALE VERNIER
1000 mm Dual Scale Digital Vernier0-1000 mm / 0-40” Graduations 0.01 mm / 0.001”
RRP $799
Now $489 LOW STOCK!
PN: DIGVER40
PRECISION LEVELAccuracy: 250/0.2 mm per 1000 mm
RRP $149
Now $99 PN: GPL250
BORE DIAL GAUGES
VERNIER PROTRACTOR
Set includes: Protractor, Aux. Arm, 150 mm, 200 mm, 295 mm arms
Range: 0-360° Increments: 5 amin
RRP $65
Now $39 PN: UBPVER
UNIVERSAL BEVEL PROTRACTORRange: 0-320° Increments: 2 amin
RRP $119
Now $69 PN: UNIVBEV
Telescopic Gauge SetSix Piece Set Range: 8-150 mm
RRP $54
Now $35 PN: TELCHIN
Micrometer Stand with Fine adjustment• Magnetic base
with switch
• V-block base
RRP $45
Now $29 PN: MAGSTAND
LAST CHANCE LIQUIDATION SALE! LAST CHANCE LIQUIDATION SALE!
Page 35 - Engineering Equipment
PRICED TOMOVE!
250 mm Tubular MicrometerAccuracy: ±0.01 mm Range: 50-250 mm
RRP $195
Now $110 PN: MICTUB3” Micrometer
Range: 2-3” Increments: 0.0001”
4” MicrometerRange: 3-4” Increments: 0.0001”
4-5” MicrometerRange: 4-5” Increments: 0.0001”
6” MicrometerRange: 5-6” Increments: 0.0001”
7” MicrometerRange: 6-7” Increments: 0.0001”
8” MicrometerRange: 7-8” Increments: 0.0001”
9” MicrometerRange: 8-9” Increments: 0.0001”
10” MicrometerRange: 9-10” Increments: 0.0001”
11” MicrometerRange: 10-11” Increments: 0.0001”
12” MicrometerRange: 11-12” Increments: 0.0001”
16” MicrometerRange: 12-16” Increments: 0.0001”
20” MicrometerRange: 16-20” Increments: 0.0001”
RRP $49
Now $35 LOW STOCK!
PN: MIC23
RRP $65
Now $39 LOW STOCK!
PN: MIC34
RRP $89
Now $55 PN: MIC45
RRP $95
Now $65 LOW STOCK!
PN: MIC56
RRP $110
Now $65 LOW STOCK!
PN: MIC67
RRP $125
Now $65 LOW STOCK!
PN: MIC78
RRP $139
Now $69 LOW STOCK!
PN: MIC89
RRP $155
Now $69 LOW STOCK!
PN: MIC910
RRP $169
Now $69 LOW STOCK!
PN: MIC1011
RRP $185
Now $69 LOW STOCK!
PN: MIC1112
RRP $339
Now $159 LOW STOCK!
PN: MIC1216
RRP $369
Now $159 LOW STOCK!
PN: MIC1620
6-12” Micrometer SetSet includes 6 Micrometers
RRP $569
Now $299 LOW STOCK!
PN: MICSET612
100 mm MicrometerRange: 75-100 mm Increments: 0.02 mm
175 mm MicrometerRange: 150-175 mm Increments: 0.02 mm
200 mm MicrometerRange: 175-200 mm Increments: 0.02 mm
225 mm MicrometerRange: 200-225 mm Increments: 0.02 mm
250 mm MicrometerRange: 225-250 mm Increments: 0.02 mm
275 mm MicrometerRange: 250-275 mm Increments: 0.02 mm
300 mm MicrometerRange: 275-300 mm Increments: 0.2 mm
500 mm MicrometerRange: 400-500 mm Increments: 0.02 mm
600 mm MicrometerRange: 500-600 mm Increments: 0.02 mm
800 mm MicrometerRange: 700-800 mm Increments: 0.02 mm
RRP $65
Now $39 PN: MIC75100
RRP $110
Now $65 LOW STOCK!
PN: MIC150175
RRP $125
Now $65 LOW STOCK!
PN: MIC175200
RRP $139
Now $69 LOW STOCK!
PN: MIC200225
RRP $155
Now $69 LOW STOCK!
PN: MIC225250
RRP $169
Now $69 LOW STOCK!
PN: MIC250275
RRP $185
Now $69 LOW STOCK!
PN: MIC275300
RRP $369
Now $259 LOW STOCK!
PN: MIC400500
RRP $455
Now $279 LOW STOCK!
PN: MIC500600
RRP $755
Now $599 LOW STOCK!
PN: MIC700800
OUTSIDE IMPERIAL MICROMETERS
OUTSIDE MICROMETERS SETS INSIDE MICROMETERS4” Inside MicrometerRange: 3-4”
RRP $110
Now $65 LOW STOCK!
PN: MICIN34
OUTSIDE METRIC MICROMETERS
25 mm Depth MicrometerIncrements: 0.01 mm Range: 0-25 mm
RRP $98
Now $62 LOW STOCK!
PN: MICDEP025
1” Dial Indicator & Point SetsMetric Dial GaugePN: DGAI1K
Range: 0-25 mm Increments: 0.01 mm
Includes Dial Indicator, 22 Piece Contact Points Set and blow-mold case.
Imperial Dial GaugePN: DGAM25K
Range: 0-1” Increments: 0.001”
Includes Dial Indicator, 22 Piece Contact Points Set and blow-mold case.
$39.00 EA
100 mm Tubular Micrometer Extension
RRP $65
Now $35 PN: MICTUBEXT
FREE Points Set &
Blow‑Mold Case!
Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at time of printing. M. Gamer Pty. Ltd. and National Tool Distributors will do everything possible within reason to maintain stocks of products. M. Gamer Pty Ltd and National Tool Distributors reserves the right to change prices without notice. ALL PRICES QUOTED INCLUDE GST.
360° Keyless 10 mm Drill AttachmentChuck Capacity. 1.5-10 MM Angle Range: 360° / 16 increments Max. speed: 3500 RPM Max torque: 35 Nm Drive: 6 MM Hex Weight: 465 G
PN: PORRADAV360CL
$249.00• Fits all standard power tools and screwdrivers.
• Includes T handle locking wrench.
• Metal Body, Hard Nylon chuckMade in Italy.
See full range on page 24.
See full range on page 9.
3” Quick-Lock Preparation Kit7 Piece kit includes 1 of each: 1/4” shank, 3” backing pad, 24 Grit 3” disc, 36 Grit 3” disc, 50 Grit 3” disc, Brown (Coarse) surface prep 3” disc & Maroon (Medium) surface prep 3” disc.
PN: GPK3
$39.00
5 Compartment Pivot Drawer Set.Wall mountable
600W MM x 103D MM x 150H MM
PN: FO605
$34.00
MOBILE SORTING CARTSMobile Tip Out Sorting CartC/W 2 x FO308, 2 x FO306, 2 x FO605 and 2 x FO604600W MM x 1200h MM
Double Sided Mobile Tip Out Sorting Cart
C/W 4 x FO308, 4 x FO306, 4 x FO605 and 4 x FO604
600W MM x 1200h MM
PN: MSFO4568
$489.00
PN: MSFO4568X2
$644.00
6 Compartment Pivot Drawer Set.Wall mountable
300W x 86D MM x 250H MM
PN: FO306
$24.00
4 Compartment Pivot Drawer Set.Wall mountable
600W MM x 140D MM x 200H MM
PN: FO604
$42.00
PIVOT DRAWERS
NEW!
NEW!
SURFACE PREP ACCESSORIES
8 Compartment Pivot Drawer Set. Wall mountable
300W x 67D mm x 200H mm
PN: FO308
$24.00
75 mm Quick-Lock Sanding Discs
$14.00 EA
50 mm Quick-Lock Mini Flap Discs
$22.00 EA
36 Grit Sanding Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013S36
80 Grit Sanding Discs 75 MM Quick-Lock (Pack of 5) PN: AB22013S80
60 Grit Mini Flap Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012F60
80 Grit Mini Flap Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012F80
NEW!
NEW!Pack of 5.
Pack of 5.
Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.
Distributed by: