+ All Categories
Home > Documents > GARBARUK XD-COMPATIBLE CASSETTE · GARBARUK CASSETTE LOCKRING SIZE D MAX 21 mm REAR HUB END CAPS’...

GARBARUK XD-COMPATIBLE CASSETTE · GARBARUK CASSETTE LOCKRING SIZE D MAX 21 mm REAR HUB END CAPS’...

Date post: 18-Oct-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
GARBARUK XD-COMPATIBLE CASSETTE FITTING SPECIFICATION
Transcript
Page 1: GARBARUK XD-COMPATIBLE CASSETTE · GARBARUK CASSETTE LOCKRING SIZE D MAX 21 mm REAR HUB END CAPS’ SIZING Standard end caps' diameter for most rear hubs normally equals 19-20 mm,

GARBARUK XD-COMPATIBLE CASSETTEFITTING SPECIFICATION

Page 2: GARBARUK XD-COMPATIBLE CASSETTE · GARBARUK CASSETTE LOCKRING SIZE D MAX 21 mm REAR HUB END CAPS’ SIZING Standard end caps' diameter for most rear hubs normally equals 19-20 mm,

D = 21,2 mm

Inner diameter of Garbaruk XD-compatible cassette's outer lockring is 21.2 mm.

GARBARUK CASSETTE LOCKRING SIZE

D 21 mmMAX

REAR HUB END CAPS’ SIZING

Standard end caps' diameter for most rear hubs normally equals 19-20 mm, but not all manufacturers follow these standards.

Maximum end cap diameter our cassette can be installed onto equals 21 mm.


Recommended