268 www.federalcorp.com 6 GARMAN CO. INC. (VAPCO)__________________ IPS (WELD-ON)____________________________ Order No. Model No. Description DSR10 DSR-10 10 LB carton DRY SCALE REMOVER Use in cooling tower system, evaporative condensers, boilers--wherever a liquid scale remover might be used. "Tel-Action" pH indicator strips supplied with each container. Order No. Model No. Application Size NS1 NS-1 Will insulate 10 ft of 1" pipe (8 sq ft) with two coats 18 oz. NO SWEAT TM SPRAY-ON PIPE INSULATION Stops sweating and dripping in cold water pipes, refrigeration lines, etc. Easily applied to odd shaped fittings and hard to reach areas. Order No. Size Order No. Size 711-1/2PT Half Pint 725PT Pint 711PT Pint 711QT Quart C65-1/2PT Half Pint 711GAL Gallon C65PT Pint C65QT Quart 705-1/2PT Half Pint C65GAL Gallon 705PT Pint 705QT Quart P70-1/2PT Half Pint P70PT Pint 724PT Pint P70QT Quart P70GAL Gallon 714QT Quart CEMENT, CPVC, ORANGE (medium set to 12" dia) CEMENT, PVC, BLUE, WET'R DRY (fast setting to 6" dia) CLEANER, C-65 (removes surface dirt and grease, for PVC, CPVC, ABS) PRIMER, PURPLE, P-70 (soften surface of PVC & CPVC for proper solvent welding) PVC/CPVC CEMENT, PRIMER & CLEANER CEMENT, PVC, GRAY (medium setting, Sch 80 up to 12" dia) CEMENT, PVC, CLEAR (fast setting, Sch 40 up to 6" dia) CEMENT, CPVC, GRAY (fast setting, to 12" dia) J.C. WHITLAM_____________________________ FURNACE CEMENT Order No. Size HT1 GAL. CAN Asbestos free, temp range 0/2000 o F. Usage includes re-setting and cementing furnaces, stoves, boilers, chimney collars, bedding and cementing fire brick. INDUSTRIAL GRADE PIPE THREAD COMPOUND Order No. Size IG8 1/2 PT IG16 1 PT "Blue Magic" temp. range -- 100/+600 o F, press range 6000 psi liquid, 3000 psi gases. For use on metal or plastic pipe/fittings.
Transcript
268 www.federalcorp.com
6
_______________________SCHAEFER BRUSHESGARMAN CO. INC. (VAPCO)__________________
IPS (WELD-ON)____________________________
Order No. Model No. DescriptionDSR10 DSR-10 10 LB carton
DRY SCALE REMOVERUse in cooling tower system, evaporative condensers, boilers--wherever a liquid scale remover might be used. "Tel-Action" pH indicator strips supplied with each container.
garman scale remover
Order No. Model No. Application SizeNS1 NS-1 Will insulate 10 ft of 1" pipe (8 sq ft) with two coats 18 oz.
NO SWEATTM SPRAY-ON PIPE INSULATIONStops sweating and dripping in cold water pipes, refrigeration lines, etc. Easily applied to odd shaped fittings and hard to reach areas.
P70GAL Gallon714QT QuartCEMENT, CPVC, ORANGE (medium set to 12" dia)
CEMENT, PVC, BLUE, WET'R DRY (fast setting to 6" dia)
CLEANER, C-65 (removes surface dirt and grease, for PVC, CPVC, ABS)
PRIMER, PURPLE, P-70 (soften surface of PVC & CPVC for proper solvent welding)
PVC/CPVC CEMENT, PRIMER & CLEANER
CEMENT, PVC, GRAY (medium setting, Sch 80 up to 12" dia)
CEMENT, PVC, CLEAR (fast setting, Sch 40 up to 6" dia)
CEMENT, CPVC, GRAY (fast setting, to 12" dia)
IPS WeldOn OK SALES cements & cleaners
J.C. WHITLAM_____________________________
FURNACE CEMENT
Order No. SizeHT1 GAL. CAN
Asbestos free, temp range 0/2000oF. Usage includes re-setting and cementing furnaces, stoves, boilers, chimney collars, bedding and cementing fire brick.
whitlam furnace cement 7/21/2008
INDUSTRIAL GRADE PIPE THREAD COMPOUND
Order No. SizeIG8 1/2 PTIG16 1 PT
"Blue Magic" temp. range --100/+600oF, press range 6000 psi liquid, 3000 psi gases. For use on metal or plastic pipe/fittings.
Condenser tube brushes, nylon single spiral, nipple with 12-24 female thread.43716 5/8 OD X 4 NYLON TUBE BRUSHCondenser tube brushes, stainless steel double spiral, nipple with 12-24 female thread.43816 5/8 OD X 4 S.S. TUBE BRUSH43828 7/8 OD X 4 S.S. TUBE BRUSH43407 7/8 OD X 4 X 1/8MPT S.S TUBE BRUSHAccessories for condenser brushes13001 T-Handle, 4" long X 1/2" dia, 12-24 thread, for use with 1300213002 24" alum ext rod, 5/16" dia with 12-24 MXF threadTin handle acid brush, selected horse hair, securely pressed in tin ferrule.10001 3/8" brush, 5" handleAMA00110 (10 pkg) 3/8" tin handle acid brushWooden handle dope brush, selected horse hair, with metal ferrule.10072 3/4" brush, 7" handle (2 per pkg)Copper fitting brush, solid plastic handle, stainless steel double spiral 4-ply wire.AMA924 1/4" O.D. (1/8" ID) brushAMA925 3/8" O.D. (1/4" ID) brushAMA926 1/2" O.D. (3/8" ID) brushAMA927 5/8" O.D. (1/2" ID) brushAMA929 7/8" O.D. (3/4" ID) brushAMA931 1-1/8" O.D. (1" ID) brush
TUBE/ACID/DOPE BRUSHES
SCHAEFER tube brushes
____________________________________LA-CO
Order No. Unit Size08910 10 oz
E-Z BREAK® ANTI SEIZE COMPOUNDLow and high temperatures, copper based, temp to 1800oF. For coating nuts, bolts, valves, flanges, splines, for easy breakout after years of service.
LACO E-Z BREAK COMPOUND
Order No. Size Type Description22104 4 oz can Paste Flux32707 1 lb can 95/5 Flux and Solder
SOLDERING FLUX & SOLDERContains no zinc or other heavy metal chloride, non-acid, non-toxic, lead-free. For use on copper, galvanized iron, sheet lead, zinc, nickel, tin, silver, mild steel, terne plate, malleable iron.
LACO solder flux
GARMAN CO. INC. (VAPCO)__________________
J.C. WHITLAM_____________________________
270 www.federalcorp.com
6
LA-CO____________________________________
Order No. Description Unit Size72405 LIFTER HAND WIPES 72/Bucket
HAND WIPESRemoves dirt, grease, oils, tar, wax, lubricants, adhesives and many other hard to remove materials. Conditions and softens hands, contains germ fighting TricLosan. Smooth side for gentle cleaning, rough side for hard to clean areas. Tear resistant, non-woven towels in 72 count pop-up bucket.
LACO HAND WIPES
Order No. Unit Size11511 10 oz tube
HEAT ABSORBING PASTEAbsorbs surface heat, protects rubber and plastic components during soldering or brazing of dielectric, ball, and solenoid valves. Easy to clean, wipe off with cloth or wash with water.
LACO HEAT ABSORB PASTE
Order No. Unit Size11509 32 oz
COOL-GEL® HEAT DISSIPATING SPRAYHelps prevent heat damage to components and surrounding materials during soldering, brazing, welding. No residue, non-toxic, harmless to skin.
LACO HEAT DISSAP SPRAY
Order No. Model No. ColorMARKERBLACK 96813 BlackMARKERRED 96812 RedMARKERWHITE 96810 WhiteMARKERYELLOW 96811 YellowMARKERBLUE 96815 BlueMARKERGREEN 96816 Green
MARKAL® PAINT MARKERSLead-free, marking range - 50/150oF, ideal for many surfaces, metal, glass, wood, rubber, plastic, cardboard, paper.
LACO PAINT MARKERS
SPECIFICATIONS:Temperatures: 50-500oFPressure: Up to 10,000 psi
Order No. Unit Size Order No. Unit Size42009 1/4 Pint 42013 Quart42019 1/2 Pint 42014 Gallon42029 Pint 42015 5 Gallon
SLIC-TITE® PASTE WITH TEFLONHeavy duty thread sealing compound. Do not use on oxygen. Non toxic--non drying--anti seize. Premium white grade. For water, steam, air, natural gas, gasoline, kerosene, refrigerants, LP gases. Use on steel, aluminum or brass. U.L. Listed.
LACO SLIC-TITE PASTE
NO-DRIP SILICONIZED
Order No. Unit Size12219 1/2 Pint
T-O-T® PIPE JOINT COMPOUND
For water, steam, air, natural gas service. Pressures to 1000 psi, temp -50/350oF. Do not use for oxygen service, chlorine, or other oxidizers. Use on metal threads.
Order No. Unit Size44072 1/2 X 520 Ft44075 3/4 X 520 Ft44078 1 X 520 Ft
TEFLON PIPE TAPEStd grade, low density, suitable for use with solvents, chemicals, oxygen, and on food lines. Thickness - 3 mils. Pressures to 2000 psi. Temp range - 450/550oF.
Order No. Model No. DescpriptionSANDCLOTH10YD 8971 SAND CLOTH 1-1/2 X 10 YD SANDCLOTH25YD MA-90304 SAND CLOTH 1-1/2" X 25 YDWATERPROOF10YD MA-90503 WATERPROOF ABRASIVE 1-1/2" X 10 YDAMA00110 AMA-001-10 3/8" TINHANDLE ACID BRUSH (10 pk)TORCH 15041 TORCH SELF LIGHT MAPP/PROPANEMAPPGAS 3X676 MAPP GAS 16 OZPROPGAS 6Z010 PROPANE GAS 14.1 OZ
MISC COPPER ACCESSORIES 7/18/2008
__MISC. TUBING/PIPE INSUL. & ACCESSORIES
Order No. Unit Size49050 1.69 oz tube49250 8.45 oz tube
LOC® ANAEROBIC PIPE THREAD SEALANTSeals and locks in the absence of air, contains PTFE, ideal for threads in heavy vibration areas. Sealing range 65/400oF.
LACO ANEROBIC PIPE SEAL
PACKING AND GASKET SEALANT
Order No. Unit Size45089 3/32" X 25 Ft45092 7/32" X 10 Ft
SLIC-TITE® SEALANT CORD
Use as packing for faucets, valves, pumps, gasket between flanges. Temp range 450/550oF.
LACO slic tite cord
Order No. Model No. Unit SizeSA1 SA-1 14 OZ. CAN
SPRAY ADHESIVEflexible film. Resists aging and degradation. Excellent for metal, foam, rubber, plastic, etc.
m&m SPRAY ADHESIVE 7/18/2008
Order No. Model No. Unit Size520-1/2PT 520 1/2 PT520PT 520 1 PT
LIQUID ADHESIVEFor use in joining the slit of rubber-type foam insulation
m&m liquid ADHESIVE 7/18/2008
Order No. Model No. SizeCORKTAPE CORK 1/8" X 2" X 30' rollJT030X150 3ASJ 3" X 150' roll
INSULATION TAPESelf adhesive; stops sweating and condensation. For use with steel pipe, copper tubing, fittings, and valves. 3ASJ jacket tape for fiberglass insulation.
m&M insulation tape 7/18/2008
LA-CO____________________________________
272 www.federalcorp.com
6
RADIATOR SPECIALTIES____________________
MISC. TUBING/PIPE INSUL. & ACCESSORIES_
J.W. HARRIS______________________________
RUBBER FOAM PIPE INSULATION -- 6' LENGTHS
Order No. For Copper Tube Size Pipe SizeA-10X-8 5/8" od 3/8"A-12X-8 3/4" od N/AA-14X-8 7/8" od 1/2"A1-1/8X-8 1-1/8" od 3/4"A1-3/8X-8 1-3/8" od 1"A1-5/8X-8 1-5/8" od 1-1/4"A2-1/8X-8 2-1/8" od N/AA2-5/8X-8 2-5/8" od N/A
FIBERGLASS PIPE INSULATION--3' LENGTHS
Order No. For Copper Tube Size Pipe SizeFPC-8X010 7/8" od 1/2"FPC-12X010 1-1/8" od 3/4"FPC010X010 1-3/8" od 1"FPC012X010 1-5/8" od 1-1/4"FPC015X010 N/A 1-1/2"FPC020X010 N/A 2"FPC025X010 N/A 2-1/2"FPC030X010 N/A 3"FPC040X010 N/A 4"
PIPE INSULATION
Used on liquid cooling and heating lines to prevent heat gain, condensation, frost formation on cold lines, and heat flow for liquid heating and dual-temperature piping. Range from 40-220oF. Resistant to moisture vapor and ozone. Available in wall thickness of 3/8", 1/2" and 3/4".
One piece "hinged" rigid fiberglass insulation up to 850oF, with all purpose white aluminum foil jacket. Use adhesive, tape, staples to close the seam. May be painted with a latex paint after installation. Wall thickness 1".
m&M pipe insulation
RUST RAIDER
Order No. Model No. SizeB532 B5-32 QTB540 B5-40 5 GAL
RADIATOR SPECIALTIES RUST RAIDER 7/18/2008
BOILER SEALERS
Order No. Model No. Size TypeB232 B2-32 QT LiquidWARNING: Do not use in systems with water lubricated pumps.
A non-metallic powder that securely seals cracks and leaks in boilers and fittings. For use in either hot water boilers or steam boilers. Forms a tough filling that expands and contracts with heat and resists pressure.
RADIATOR SP BOILER SEAL 7/18/2008
Ideal for copper tubing for potable water.
Order No. Model No. Wire Dia. Unit SizeLFSLDR 16000 1/8" 1# spool
Order No. Model No. SizeFLUX4 40057 4 oz. jarSTAY-SILVFLUX4 40020 4 oz. jar
BRIDGITTM HI TEMP FLUXLead-free, nickel bearing flux stays active to 800oF. Will not burn, reducing the black carbon deposits that can result in voids and leaks in the joint.
Note: Tin-antimony solders are not recommended for use on brass. Lead-bearing solders are not to be used in potable water systems.
jw harris common solder
Order No. Model No. SizeSF1 27035 1 Pound PackSAFETY-SILV45 76339 3 Stick TubeSTAY-SILV15 61035 28 Stick Tube45535 45535 20 Sticks per Package
Self-fluxing, phos-copper brazing alloy designed to braze copper to copper and can be used to braze copper to brass if used with Stay-Silv® White Brazing Flux.
QUICKSILVER SOLDER AND BRAZING ALLOY
jw harris quicksilver solder 7/18/2008
____________________________________E-PRO
EPT ELLIPTICAL MANHOLE/HANDHOLE GASKETS
Order No. Size Order No. SizeCM110140012 11" X 14" X 1-1/4"E CH030045-10 3" X 4-1/2"X 5/8" ECH0250375-10 2-1/2" X 3-3/4" X 5/8"E CH030045-12 3" X 4 1/2" X 3/4"E
Order No. Model No. ID ODNEOPBLRGSK 216790161001 13-1/8" X 3-3/4" 14-5/8" X 6-1/4"
Dimensions
FLANCO NEOPRENE BOILER GASKET 7/21/2008
274 www.federalcorp.com
6
TOPOG-E GASKET CO.______________________
MECHANICAL PACKING_____________________
MONTI & ASSOCIATES______________________
GASKETS_________________________________
SPECIALTY TOOLS AND ACCESSORIESOrder No. Model No. Descpription
MAPBH MA-PBH MAGNETIC BIT HOLDER POCKET TOOLMASM7 MA-SM7 FLAME INSPECTION SS MIRRORMA142MA MA-142MA 2-1/4" MAGNIFIED MIRRORMAZP41 MA-ZP41 4 OZ LUBE OIL W/ZOOM SPOUTMAZP42 MA-ZP42 4 OZ RUST BUSTERMA1109GJ MA-1109GJ 18 OZ GO-JO HAND CLEANER
MONTE SPECIALTY TOOLS 8/28/2008
HAND HOLE AND MAN HOLE GASKETSMolded rubber gaskets. Pressures to 180 psi. Temperature to 380oF.
Order No. Size Order No. SizeHAND HOLE HAND HOLEHH030040-8 3 X 4 X 1/2 elliptical HH035045-10 3-1/2 X 4-1/2 X 5/8 ellipticalHH030040-8OB 3 X 4 X 1/2 obround HH035045-12 3-1/2X4-1/2X3/4 ellipticalHH030040-10 3 X 4 X 5/8 elliptical HH040060-12 4 X 6 X 3/4 ellipticalHH030040-12 3 X 4 X 3/4 elliptical HH2-3/4X3-3/4 2-3/4 X 3-3/4 X 5/8 ellipticalHH030045-10 3 X 4-1/2 X 5/8 elliptical HH030040-80B 3 X 4 X 1/2 obroundHH035045-8 3-1/2 X 4-1/2 X 1/2 elliptical HH032045-90B 3-1/4 X4-1/2X9/16 obround
Order No. Size Order No. SizeMAN HOLE MAN HOLEMH100150014 10 X 15 X 1-3/8 elliptical MH120160012 12 X 16 X 1-1/4 ellipticalMH110150012 11 X 15 X 1-1/4 elliptical
ELLIPTICAL/OBROUND BOILER GASKETS
topog-e eliptical gaskets
FLANGE INSULATING GASKETS SETS
Order No. Model No. Size Order No. Model No. SizeINSGSKSET015 200151520110 1-1/2" INSGSKSET030 200031520110 3"INSGSKSET020 200021520110 2" INSGSKSET040 200041520110 4"INSGSKSET025 200251520110 2-1/2" INSGSKSET060 200061520110 6"
INSGSKSET080 200081520110 8"
Kit for raised face, Class 150# flanges with center phenolic washer, half length bolt sleeves, phenolic bolt washer
FLANGE INSULATING GASKETS 7/21/2008
MECHANICAL PACKINGOrder No. Model No. Description Size
SHEET PACKING711-1 711-36"X 25 SEIGELITE SHEET (36" WIDE)1 1/16"711-1/32 711-36"X 25 SEIGELITE SHEET (36" WIDE)1 1/32"960-2 960-60"X63" NON-ASBESTOS SHEET2 1/8"HIGH TEMPERATURE TAPE (LIMITED TO 1,000oF)G22-1X010 G22 GLASS FIBER WOVEN TAPE W/TEFLON 1/16" X 1" X 100'G22-1X020 G22 GLASS FIBER WOVEN TAPE W/TEFLON 1/16" X 2" X 100'G22-2X010 G22 GLASS FIBER WOVEN TAPE W/TEFLON 1/8" X 1" X 100"
2 Temp. limit 600oF. General purpose gasketing.
1 Temp. limit 250oF. Pressure limited to 500 psi at cold temp. Used for sealing flanges, handling gasoline, benzene, oil, greases and hot or cold water.
Order No. Descpription1212FY 1/2" X 9-3/4"3434FY 3/4" X 11-1/2"1010FY 1" X 13"
MONTE VIBRATION ABSORBERS 7/18/2008
TOPOG-E GASKET CO.______________________
MECHANICAL PACKING_____________________
MONTI & ASSOCIATES______________________
GASKETS_________________________________
276 www.federalcorp.com
6
MISCELLANEOUS__________________________
SOUTHEASTERN HOSE______________________
BOLTS, NUTS, WASHERSOrder No. Size Order No. Size Order No. Size
CAP SCREWS CAP SCREWS CAP SCREWSCS-5X-14 5/16" x 7/8" CS-10X022 5/8" X 2-1/4" CS-12X020 3/4" X 2"CS-6X010 3/8" X 1" CS-10X025 5/8" X 2-1/2" CS-12X022 3/4" X 2-1/4"CS-8X010 1/2" X 1" CS-10X027 5/8" X 2-3/4" CS-12X025 3/4" X 2-1/2"CS-8X012 1/2" X 1-1/4" CS-10X030 5/8" X 3" CS-12X030 3/4" X 3"CS-8X015 1/2" X 1-1/2" CS-10X032 5/8" X 3-1/4" CS-12X032 3/4" X 3-1/4"CS-8X020 1/2" X 2" CS-10X035 5/8" X 3-1/2" CS-12X035 3/4" X 3-1/2"CS-8X022 1/2" X 2-1/4" CS-10X037 5/8" X 3-3/4" CS-12X037 3/4" x 3-3/4"CS-8X025 1/2" X 2-1/2" CS-10X040 5/8" X 4" CS-12X040 3/4" X 4"CS-10X012 5/8" X 1-1/4" CS-10X045 5/8" X 4-1/2" CS-12X045 3/4" X 4-1/2"CS-10X015 5/8" X 1-1/2" CS-10X050 5/8" X 5" CS-12X055 3/4" X 5-1/2"CS-10X017 5/8" X 1-3/4" CS-10X055 5/8" X 5-1/2" CS-14X022 7/8" X 2-1/4"CS-10X020 5/8" X 2" CS-12X017 3/4" X 1-3/4" CS-14X065 7/8" X 6-1/2"
Order No. Size Order No. Size Order No. SizeHEX NUTS HEX NUTS HEX NUTSHN-4 1/4" HN-8 1/2" HN-12 3/4"HN-6 3/8" HN-10 5/8" HN-14 7/8"
Order No. Size Order No. Size Order No. SizeFLAT WASHERS FLAT WASHERS FLAT WASHERSSW-4 1/4" SW-8 1/2" SW-12 3/4"SW-6 3/8" SW-10 5/8" SW-14 7/8"SW-7 7/16"
SCREW PRODUCTS bolts, nuts, washers 7/22/2008
STAINLESS STEEL HOSE CLAMPS9/16" band all stainless steel hose clamps.
Order No. Model No. Min. Max. Order No. Model No. Min. Max.6204 6204 1/4" 5/8" 6824 6824 1" 2"6806 6806 3/8" 7/8" 6828 6828 1-5/16" 2-1/4"6808 6808 7/16" 1-1/8" 6836 6836 7/8" 2-3/4"6812 6812 1/2" 1-1/4" 6840 6840 1-1/8" 3"6816 6816 3/4" 1-1/2" 6844 6844 1-5/16" 3-1/4"6820 6820 3/4" 1-3/4" 68104 68104 4" 7"
Clamp Dia. Clamp Dia.
STAINLESS STEEL HOSE CLAMPS 7/22/2008
FLEXIBLE PUMP CONNECTORS AND BRAIDED CONNECTORSDESIGNED FOR PUMP VIBRATION PLUS 1/8" MISALIGNMENT
Order No. Model No. Size (I.D. X Length) 70oF 250oFSTEEL MALE THREAD CONNECTIONS, SS HOSE, SS BRAIDSECM100 SECM-100 1" X 8" 500 psi 450 psiSECM125 SECM-125 1-1/4" X 8-1/2" 400 psi 360 psiSECM150 SECM-150 1-1/2" X 9" 350 psi 315 psiSECM200 SECM-200 2" X 10-1/2" 350 psi 315 psi150# STEEL FLANGE ENDS, SS HOSE , SS BRAIDSECF200 SECF-200 2" x 9" 200 psi 180 psiSECF250 SECF-250 2-1/2" X 9" 250 psi 225 psiSECF300 SECF-300 3" X 9" 300 psi 270 psiSECF400 SECF-400 4" X 9" 200 psi 180 psiSECF500 SECF-500 5" X 11" 250 psi 225 psiSECF600 SECF-600 6" X 11" 175 psi 155 psi150# STEEL FLANGE ENDS, NITRILE (BUNA N) TUBE, NEOPRENE COVERSEMS250 SEMS-250 2-1/2" X 6" 220 psiSEMS300 SEMS-300 3" X 6" 220 psiSEMS400 SEMS-400 4" X 6" 220 psiSEMS500 SEMS-500 5"X6" 220 psiSEMS600 SEMS-600 6" X 6" 220 psiSEMS800 SEMS-800 8" X 6" 220 psi1 For pulsating pressure, reduce working pressure by 50%.SEMS Rated -140 TO 2400F, 220 psig.
SBR36-1 1/16" X 36" Red Rubber -20/170oFSBR36-2 1/8" X 36" Red Rubber -20/170oF
Syrene Butadiene Rubber sheet packing recommended for low pressure applications such as washers and gaskets for the heating and plumbing trade. An economical, non-oil resistant compound that resist flow under compression.
DUCT TAPEDTBLACK020 2" X 60 YD Black PPW020 2" X 100'DTBLUE020 2" X 60 YD Blue PPW040 4" X 100'DTRED020 2" X 60 YD Red PGPQT Poly Guard Primer qt.DTSILVER020 2" X 60 YD Silver ALUMINUM FOIL TAPE
AFT020 2" X 50 YD
PRIMER/TAPE TO COVER THE EXPOSED PART OF COATED PIPE
2HD 2 gal 3/4" 200 psi 200oF5HD 5 gal 3/4" 200 psi 200oF
ACCESSORIES3138 Valve package for Pot Feeder
Shot feeders designed to provide a rugged and dependable chemical feeder for chilled and hot water systems. (Valve package must be ordered with feeder)
HEATCABLE 2502 Cable per footCONNKITHTCBL 10702 End connector kit
Self-regulating heat cable. 120V, 3 W per foot at 50oF. Maximum exposure temperature 150oF. Braided. Order one connection kit for each application for cable runs up to 50 feet.
easy heat freeze cables
______________________________HONEYWELL
____________________________TEXAS FAIRFAX
Order No.Connection Size & Type Diameter Height Volume
Max. Acceptance
Volume WeightTK30015 ½" NPT Male 8" 12 5/8" 2.0 Gal. 1 Gal 5 lb.TK30030 ½" NPT Male 11" 15 1/2" 4.4 Gal. 2.5 Gal 9 lb.TK30060 ½" NPT Male 11" 23" 7.6 Gal. 2.5 Gal. 14 lb.TK30090 ½" NPT Male 15 3/8" 21" 14 Gal. 11.5 Gal. 23 lb.
TK300 SERIES EXPANSION TANKS - HEATINGTanks designed to absorb hot water expansion in closed heating systems. Equipped with buty diaphragms to separate the air from the system water. The tanks are welded and pre-pressurized at 12 psi.
Brass body, nordel valve core, 250oF temperature
Order No. Model No. DescriptionN76L02 N-76L-02 1/4 " PLUG & CAP W/2" LAGPTB N-76-02 1/4 " PLUG & CAPN7802 N-78-02 1/2 " PLUG & CAPGA8002 GA-80-02 1/4" GAGE ADAPTER W/CASE
Polypropylene liner. 100% non-metallic, non-corrosive water reservoir.
Tank is a welded, pressurized expansion tank with a butyl diaphragm to control excess pressure in potable hot water systems.Heavy duty butyl rubber diaphragm (FDA aproved) isolates water from air
TX SERIES EXPANSION TANKS-DOMESTIC HOT WATER
280 www.federalcorp.com
6
HACKSAWOrder No. Model No. Descpription
HACKSAW12 35975 HACK SAW1232BM 1232BM 12" HIGH SPEED BLADE
ridge HACKSAW 9/11/2008
RIDGE TOOL_______________________________
For steel and other metal pipe.Order No. Model No. Size2A 32820 1/8 - 2"
HEAVY DUTY PIPE CUTTERS
ridgid HEAVY DUTY PIPE CUTTERS
HEAVY DUTY Straight steel pipe wrenchesOrder No. Model No. SizePIPEWREN10 31010 10PIPEWREN12 31015 12PIPEWREN14 31020 14PIPEWREN18 31025 18PIPEWREN24 31030 24
WRENCHES
ridgid pipe wrenches
Order No. Model No. SizeALUMINUM STRAIGHT PIPE WRENCHESALUMWREN18 31100 18ALUMWREN24 31105 24ALUMWREN36 31110 36
STRAP WRENCH
Order No. Model No. SizeHandle Length
Strap Length
Strap Width
Pipe Capacity
Tube Capacity (OD)
R2 31340 2 11-3/4" 17" 1-1/8" 2" 3-1/2"
SPECIALITY WRENCHES
ridgid SPECIALITY pipe wrenches
For copper, brass, aluminum, thin-wall conduit, plastic tubing.
Order No. Model No. Description Capacity104 32985 Midget Cutter 3/16" to 15/16"150 31622 Tubing Cutter 1/8" to 1-1/8"151 31632 Tubing Cutter 1/4" to 1-5/8"152 31642 Tubing Cutter 1/4" to 2"153 36592 Tubing Cutter 1-1/4" to 3-1/2"154 31652 Tubing Cutter 1-7/8" to 4-1/2"
Order No. Model No. Color SizeOILDARKQT 41590 Dark QuartOILDARKGAL 70830 Dark GallonOILCLEARQT 41565 Nu-Clear QuartOILCLEARGAL 70835 Nu-Clear Gallon
THREAD CUTTING OILSThread cutting oils cool while speeding metal removal, producing a smooth finish and preventing chips from welding to dies. Satisfactory for threading stainless steel. Color is a matter of personal preference. The dark is a traditional mineral oil while the clear has been filtered and maintains a working viscosity to -20 oF.
ridgid THREAD CUTTING OIL
Order No. Model No. Nom. Pipe Size Order No. Model No. Nom. Pipe Size
