Date post: | 11-May-2015 |
Category: |
Education |
Upload: | computer55 |
View: | 1,482 times |
Download: | 0 times |
OUTLINES CHROMATOGRAPHY HISTORY GAS CHROMATOGRAPHY GAS CHROMATOGRAPH MAIN COMPONENTS WORKING PRINCIPLE OF GC PROCEDURE OF GC FACTORS AFFECTING GC
Chromatography
•Greek word “CHROMA” and “Graphein”.•Process of separation and
analyzation of complex mixture
How it works
It works on the basis of rate at which the types of components flow. As the mixture of various components enter the chromatograph we will observe that the different components of a mixture move/flow at different rate. This different rate of flowing is responsible for the separation of their components.
TYPES OF CHROMATOGRAPHY
•GAS CHROMATOGRAPHY
•LIQUID CHROMATOGRAPHY
•ION EXCHANGE CHROMATOGRAPHY
•AFFINITY CHROMATOGRAPHY
Mikhail TswettRussian Botanist
(1872-1919)
HISTORY
•RUSSIAN SCIENTIST MIKHAIL SEMENVOICH TSWETT • INVENTED CHROMATOGRAPHY IN 1901
•GERMAN GRADUATE STUDENT FRITZ PRIOR •DEVELOPED THE SOLID STAE GAS CHROMATOGRAPHY IN 1947
•ARCHER JOHN PORTER MARTIN•DEVELOPED THE LIQUID-LIQUID CHROMATOGRAPHY IN 1941
FRITZ PRIORLATER ON HE DEVELOPED THE GAS CHROMAATOGRAPHY IN 1950
John MartinBritish chemist1910-2002
Gas Chromatography Gas chromatography is separation method.
Gas chromatography is a chromatographic technique that can be used to separate volatile organic compounds.Gas Chromatography consists of two phases. Mobile Phase Stationary phase
GAS CHROMATOGRAPH MAIN COMPONENETS:
Carrier GasInjection PortColumnOvenDetectorSample
CARRIER GAS
This is the mobile phase and should be inert gas(he, ar etc)INJECTION PORT
The injection port consist of rubber septum through which a syringe needle is inserted to inject the sample.
COLUMN
Column is the most important component where separation takes place.OVEN
Oven is also an important component in which column is fitted.
DETECTOR
Detector is to indicate the presence and measure the amount of component eluted out from the column.
SAMPLE
The mixture of components which is to be analyzed.
WORKING PRINCIPLE OF GC It works on the principle that the organic compounds are separated due to differences in their partitioning behavior between Mobile phase and Stationary phase. The mobile phase is comprised of inert gas.The stationary phase consists of packed column.
PROCEDURE OF GC Sample is injected in
column. Oven heats the system to vaporize the sample and speed its passage through the column. The different components of the sample will be separated by the column because each of the components “sticks” to the liquid coating that on the column packing differently.
When a substance leaves the column, it is sensed by a detector. The detector generates the voltage that is proportional to the amount of the substance. Chromatogram
FACTORS AFFECTING GC
Temperature: T he higher the temperature, the more of the compound is in the gas phase.Carrier gas flow: If the carrier gas flow is high, the molecules do not have a chance to interact with the stationary phase. Column length: The longer the column is the better the separation usually is.
Amount of material injected: The injection of too much sample causes poor separation.
Conclusion: High temperatures and high flow rates decrease the retention time, but also deteriorate the quality of the separation.
PRESENTED BY:
ALLAH WARAYO (12PG41) NOOR MUHAMMAD (12PG37)ABDUL KARIM (12PG34)
Question or any Queries
?