45
Gas and Telemetry Module Ordering Guide Revision Z06 October 2013
Gas and Telemetry Module Ordering Guide Revision Z06 October 2013
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 2 (800) 635-5461 www.itron.com Rev. Z06
Gas Module Ordering Guide Contents Residential ERT® module: 100G Datalogging FN Elster American Meter .................................................................................................. 3 Residential ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell) 11-Tooth ....................................................... 4 Residential ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell) 16-Tooth ....................................................... 5 Residential ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell) 18-Tooth ....................................................... 6 Residential ERT® module: 100G Datalogging FN Itron (Sprague, Schlumberger, Actaris) ......................................................................... 7 Residential ERT® module: 100G Datalogging FN Sprague 175RM ............................................................................................................ 8 Residential ERT® module: 100G Datalogging FN National (Lancaster) ...................................................................................................... 9 Commercial ERT® module: 100G Datalogging FN Elster American Meter ............................................................................................... 10 Commercial ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell, EMCO) ...................................................... 11 Remote ERT® module: 100G Datalogging FN Remote with Encoder Cable ............................................................................................ 12 Remote ERT® module: 100G Datalogging FN Volume Corrector Remote ............................................................................................... 13 Remote ERT® module: 100G Datalogging FN Rotary Remote for meters and instruments with factory-installed pulse outputs .............. 14 Remote ERT® module: 100G Datalogging FN Remote for GE Oil & Gas/Dresser Meters IMC/W2 or MC2, Electronic TC, ETC, or ES3, D800/D1000 Rotary Meter ........................................................................................................................................................... 15 Residential ERT® module: 100G DLS Datalogging Elster American Meter .............................................................................................. 16 Residential ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell) 11-Tooth .................................................. 17 Residential ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell) 16-Tooth .................................................. 18 Residential ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell) 18-Tooth .................................................. 19 Residential ERT® module: 100G DLS Datalogging Itron (Sprague, Schlumberger, Actaris) .................................................................... 20 Residential ERT® module: 100G DLS Datalogging Sprague 175RM ........................................................................................................ 21 Residential ERT® module: 100G DLS Datalogging National (Lancaster) ................................................................................................. 22 Commercial ERT® module: 100G DLS Datalogging Elster American Meter ............................................................................................. 23 Commercial ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell, EMCO).................................................... 24 Remote ERT® module: 100G DLS Datalogging Remote with Encoder Cable .......................................................................................... 25 Remote ERT® module: 100G DLS Datalogging Volume Corrector Remote ............................................................................................. 26 Remote ERT® module: 100G DLS Datalogging Rotary Remote for meters and instruments with factory-installed pulse outputs ............ 27 Remote ERT® module: 100G DLS Datalogging Remote for GE Oil & Gas/Dresser Meters IMC/W2 or MC2, Electronic TC, ETC, or ES3, D800/D1000 Rotary Meter ........................................................................................................................................................... 28 Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Elster American Meter ............................................................................ 29 Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 ................................................................................................................ 30 Sensus (Invensys, Equimeter, Rockwell) 11-Tooth .................................................................................................................................. 30 Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sensus (Invensys, Equimeter, Rockwell) 16-Tooth ................................ 31 Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sensus (Invensys, Equimeter, Rockwell) 18-Tooth ................................ 32 Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Itron (Sprague, Schlumberger, Actaris) .................................................. 33 Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sprague 175RM ..................................................................................... 34 Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 National (Lancaster) ............................................................................... 35 Commercial gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Elster American .................................................................................... 36 Commercial gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sensus (Invensys, Equimeter, Rockwell) .............................................. 37 Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Remote with Encoder Cable ........................................................................ 38 Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Volume Corrector Remote .......................................................................... 39 Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Rotary Remote for meters or instruments with factory-installed pulse outputs ............................................................................................................................................................................................ 40 Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Remote for Honeywell Mercury Instrument Temperature Compensated Index (TCI) ................................................................................................................................................................................................ 41 Range extender: 2.4ZR OpenWay®, Smart Energy 1.0 ............................................................................................................................ 42 Battery Replacement Kit for use on all 40 Series Gas ERT® Modules...................................................................................................... 43 Telemetry module: 100T-HON Honeywell Telemetry Module ................................................................................................................... 44 Telemetry module: 100T-CP Cathodic Protection Telemetry Module ....................................................................................................... 45
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 3 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G Datalogging FN Elster American Meter Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-001
For factory programmed modules, order as ERG-5003-001P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Index Cover MLD-0200-002 1 cover required per module Covers sold in box quantity of 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 4 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell) 11-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-002 For factory programmed modules, order as ERG-5003-002P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 5 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell) 16-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-003
For factory programmed modules, order as ERG-5003-003P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 6 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell) 18-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Item Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-004 For factory programmed modules, order as ERG-5003-004P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag of quantity 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 7 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G Datalogging FN Itron (Sprague, Schlumberger, Actaris) Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-005 For factory programmed modules, order as ERG-5003-005P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-014 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
1A Adapter Plate Kit (for flat-faced meters) CFG-0015-001
One kit required per flat-faced meter Kit includes: Adapter shim plate (1) Index cover mounting screws (4) Drive dog (2) Adapter plate mounting screws (3)
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 8 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G Datalogging FN Sprague 175RM Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-009
For factory programmed modules, order as ERG-5003-009P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-2400-004 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Mounting Screws SCR-0175-002 4 screws required per module Screws sold in bag quantity of 100
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 9 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G Datalogging FN National (Lancaster) Order in multiples of 20 (box quantity), tamper seals and hardware included.
Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-006
For factory programmed modules, order as ERG-5003-006P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Part
Item Description Itron Part Number Notes
Index Cover MLD-0200-019 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Index Mounting Screws (for index mounting plate with “legs”)
SCR-0017-001 2 screws required per module Screws sold in bag quantity of 44
Index Mounting Screws (for index back plates with through-holes)
SCR-0037-001 2 screws required per module Screws sold in bag quantity of 22
Mounting Screws SCR-0014-004 2 screws required per module
Screws sold in bag quantity of 22
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 10 (800) 635-5461 www.itron.com Rev. Z06
Commercial ERT® module: 100G Datalogging FN Elster American Meter Order in multiples of 10 (box quantity), tamper seals and hardware included. Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-007 For factory programmed modules, order as ERG-5003-007P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index cover tamper seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Mounting plate tamper seals OPT-0004-001 4 seals required per module
Seals sold in bag quantity of 40
Mounting Screws (3.35” length) with tamper holes
SCR-0062-001 4 screws required per module Screws sold in individual quantities.
Internal Tooth Lock Washers (used with metal mounting plate)
WSH-0003-006 4 washers required per module Washer sold in bag quantity of 40
Accessories
Hardware Kit CFG-5002-007
One kit accommodates ten modules. Kit includes: 40 mounting screws 40 internal tooth washers 40 mounting plate tamper seals 20 index cover tamper seals
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 11 (800) 635-5461 www.itron.com Rev. Z06
Commercial ERT® module: 100G Datalogging FN Sensus (Invensys, Equimeter, Rockwell, EMCO) Order in multiples of 10 (box quantity), tamper seals and hardware included. Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Direct Mount
ERG-5003-008 For factory programmed modules, order as ERG-5003-008P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Mounting Screws (2.94” length) SCR-0062-003 2 screws required per ERT module
Screws sold in bag quantity of 20
Module Mounting Screws with tamper holes (3.63” length) SCR-0062-002 2 screws required per ERT module
Screws sold in bag quantity of 20
Internal Tooth Lock Washers WSH-0003-006 4 washers required per module Washers sold in bag quantity of 40
Steel Flat Washer WSH-0020-005 2 washers required per module
Washers sold in bag quantity of 20
Cork Flat Washer WSH-0032-001 2 required per module
Washers sold in bag quantity of 20
Accessories
Hardware Kit CFG-5002-008
One kit accommodates ten modules. Kit includes: 20 Mounting screws 20 Mounting screws 40 Internal tooth washers 20 flat washers 20 cork washers
100G Series ERT Module Installation Guide, Direct Mount TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 12 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G Datalogging FN Remote with Encoder Cable Meter: See Compatibility List (Itron part number PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Remote Mount
ERG-5003-501: 2.5’ cable with encoder For factory programmed modules, order as ERG-5003-501P. A customer-generated configuration file must accompany factory programmed module orders. (NOTE: CFG-0081-001 kit and 013-1723-112 spacing tool required)
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Remote Installation Kit for encoder CFG-0081-001
One kit accommodates one module. Kit includes: 1 Acetone applicator stick (A) 1 Magnet hub spacer (E) 1 Magnet hub (F) 3 Screws to mount module to flat vertical surface (D) 2 Tamper seals (B) 3 Cable ties (C) (Note 2 different sizes)
Acetone Applicator Stick MSC-0020-002 Acetone sticks sold in bag quantity of 30.
Installation Kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes:
2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band Clamps (Note 2 different sizes)
Encoder Spacing Tool 013-1723-112
Required for proper placement of encoder to index. Encoder spacing tool may be used for multiple installations. Encoder spacing tool sold in individual quantities.
Splice Kit, DBR Tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, 3 gel connectors (CON-0023-001), and 1 instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-001.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 13 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G Datalogging FN Volume Corrector Remote Instrument or Meter: See Compatibility List (Itron part number PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number
100G Datalogging FN ERT Module (100G DLN), Remote Mount
ERG-5003-502: 5’ cable For factory programmed modules, order as ERG-5003-502P. A customer-generated configuration file must accompany factory programmed module orders. Customer has the option to receive direct shipments or drop ship modules from Itron to meter or instrument manufacturer.
Replacement Parts
Item Description Itron Part Number Notes
Tamper Seals
OPT-0002-003
2 seals required per module Seals sold in bag quantity of 20
Accessories
Installation Kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical
surface 1 Pipe bracket 1 Adapter plates 2 Screws to attach adapter plate to pipe
bracket 2 Screws to attach module to adapter
plate 2 Band clamps (Note 2 different sizes)
Splice Kit, DBR Tube
OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, three gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-001.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 14 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G Datalogging FN Rotary Remote for meters and instruments with factory-installed pulse outputs Meter or Instrument: See Meter Compatibility List (Itron part number: PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number Notes
100G Datalogging FN ERT Module (100G DLN), Remote Mount
ERG-5003-503 (with lead wires)
Customer has the option to receive direct shipments or drop ship modules from Itron to GE Dresser, Sensus, or Romet for connection to new meters. Customer must order ERT-to-meter cable directly from the meter manufacturer. When purchasing modules for GE Dresser meters, the GE Dresser pulser must be version 17 or later to be compatible with the module. For factory programmed modules, order as ERG-5003-503P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item
Description Itron Part Number Notes
Tamper seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Installation kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical
surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe
bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Splice kit, DBR tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, 3 gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-001.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 15 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G Datalogging FN Remote for GE Oil & Gas/ Dresser Meters IMC/W2 or MC2, Electronic TC, ETC, or ES3, D800/D1000 Rotary Meter See Meter Compatibility List (Itron part number: PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number Notes
100G Datalogging FN ERT Module (100G DLN), Remote Mount
ERG-5003-505 (with lead wires)
Customer has the option to receive direct shipments or drop ship modules from Itron to Dresser for connection to new meters or instruments. Customer must order cable directly from the meter or instrument manufacturer. For factory programmed modules, order as ERG-5003-505P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts
Item
Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Installation Kit (for wall or pipe mount) CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Splice Kit, DBR Tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, three gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size = 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-001.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 16 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G DLS Datalogging Elster American Meter Order in multiples of 20 (box quantity), tamper seals included.
Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-001 For factory programmed modules, order as ERG-5006-001P. A customer-generated configuration file must accompany all factory programmed module orders. When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Index Cover MLD-0200-002 1 cover required per module Covers sold in box quantity of 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 17 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell) 11-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-002 For factory programmed modules, order as ERG-5006-002P. A customer-generated configuration file must accompany all factory programmed module orders. When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Cover sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 18 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell) 16-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-003 For factory programmed modules, order as ERG-5006-003P. A customer-generated configuration file must accompany all factory programmed module orders. When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module Seals sold in bag quantity of 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 19 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell) 18-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-004 For factory programmed modules, order as ERG-5006-004P. A customer-generated configuration file must accompany all factory programmed module orders. When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module Seals sold in bag quantity of 20
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 20 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G DLS Datalogging Itron (Sprague, Schlumberger, Actaris) Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-005 For factory programmed modules, order as ERG-5006-005P. A customer-generated configuration file must accompany factory programmed module orders. When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-014 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
1A Adapter Plate Kit (for flat-faced meters) CFG-0015-001
One kit required per flat-faced meter Kit includes: Adapter shim plate (1) Index cover mounting screws (4) Drive dog (2) Adapter plate mounting screws (3)
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 21 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G DLS Datalogging Sprague 175RM Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-009 For factory programmed modules, order as ERG-5006-009P. A customer-generated configuration file must accompany factory programmed module orders.
When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Module Description Itron Part Number Notes
Index Cover MLD-2400-004 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Mounting Screws SCR-0175-002 4 screws required per module Screws sold in bag quantity of 100
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 22 (800) 635-5461 www.itron.com Rev. Z06
Residential ERT® module: 100G DLS Datalogging National (Lancaster) Order in multiples of 20 (box quantity), tamper seals and hardware included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-006
For factory programmed modules, order as ERG-5006-006P. A customer-generated configuration file must accompany factory programmed module orders.
When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts
Item Description Itron Part Number Notes
Index Cover MLD-0200-019 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Index Mounting Screws (for index mounting plate with “legs”)
SCR-0017-001 2 screws required per module Screws sold in bag quantity of 44
Index Mounting Screws (for index back plates with through-holes)
SCR-0037-001 2 screws required per module Screws sold in bag quantity of 22
Mounting Screws SCR-0014-004 2 screws required per module
Screws sold in bag quantity of 22
Accessories
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 23 (800) 635-5461 www.itron.com Rev. Z06
Commercial ERT® module: 100G DLS Datalogging Elster American Meter Order in multiples of 10 (box quantity), tamper seals and hardware included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-007 For factory programmed modules, order as ERG-5006-007P. A customer-generated configuration file must accompany factory programmed module orders.
When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Item Description Itron Part Number Notes
Index cover tamper seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Mounting plate tamper seals OPT-0004-001 4 seals required per module
Seals sold in bag quantity of 44
Mounting Screws (3.35” length) with tamper holes SCR-0062-001 4 screws required per module
Screws sold in individual quantities
Internal Tooth Lock Washers (used with metal mounting plate) WSH-0003-006 4 washers required per module
Washers sold in bag quantity of 44
Accessories
Hardware Kit CFG-5002-007
One kit accommodates ten modules. Kit includes: 40 mounting screws 40 internal tooth washers 40 mounting plate tamper seals 20 index cover tamper seals
100G Series ERT Module Installation Guide, Direct Mount TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 24 (800) 635-5461 www.itron.com Rev. Z06
Commercial ERT® module: 100G DLS Datalogging Sensus (Invensys, Equimeter, Rockwell, EMCO) Order in multiples of 10 (box quantity), tamper seals and hardware included. Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Direct Mount
ERG-5006-008 For factory programmed modules, order as ERG-5006-008P. A customer-generated configuration file must accompany factory programmed module orders.
When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts Item Description Itron Part Number Notes
Index Mounting Screws (2.94” length) SCR-0062-003 2 screws required per ERT module
Screws sold in bag quantity of 20
Module Mounting Screws with tamper holes (3.63” length)
SCR-0062-002 2 screws required per ERT module Screws sold in bag quantity of 20
Internal Tooth Lock Washers WSH-0003-006 4 washers required per module
Washers sold in bag quantity of 20
Steel Flat Washer WSH-0020-005 2 washers required per module
Washers sold in bag quantity of 20
Cork Flat Washer WSH-0032-001 2 washers required per module
Washers sold in bag quantity of 20
Accessories
Hardware Kit CFG-5002-008
One kit accommodates ten modules. Kit includes: 20 Mounting screws 20 Mounting screws 40 Internal tooth washers 20 flat washers 20 cork washers
100G Series ERT Module Installation Guide, Direct Mount
TDC-0823-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 25 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G DLS Datalogging Remote with Encoder Cable Meter: See Compatibility List (Itron part number PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Remote Mount
ERG-5006-501: 2.5’ cable with encoder For factory programmed modules, order as ERG-5006-501P. A customer-generated configuration file must accompany factory programmed module orders. (NOTE: CFG-0081-001 kit and 013-1723-112 spacing tool required)
Replacement Parts
Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Remote Installation Kit for encoder CFG-0081-001
One kit accommodates one module. Kit includes: 1 Acetone applicator stick (A) 1 Magnet hub spacer (E) 1 Magnet hub (F) 3 Screws to mount module to flat vertical surface (D) 2 Tamper seals (B) 3 Cable ties (C) (Note 2 different sizes)
Acetone Applicator Stick MSC-0020-002 Acetone sticks sold in bag quantity of 30.
Installation Kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes:
2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band Clamps (Note 2 different sizes)
Encoder Spacing Tool 013-1723-112
Required for proper placement of encoder to index. Encoder spacing tool may be used for multiple installations. Encoder spacing tool sold in individual quantities.
Splice Kit, DBR Tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, 3 gel connectors (CON-0023-001), and 1 instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-003.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 26 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G DLS Datalogging Volume Corrector Remote Instrument or Meter: See Compatibility List (Itron part number PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number
100G DLS Datalogging ERT Module (100G DLS), Remote Mount
ERG-5006-502: 5’ cable For factory programmed modules, order as ERG-5006-502P. A customer-generated configuration file must accompany factory programmed module orders. Customer has the option to receive direct shipments or drop ship modules from Itron to meter or instrument manufacturer.
Replacement Parts
Item Description Itron Part Number Notes
Tamper Seals
OPT-0002-003
2 seals required per module Seals sold in bag quantity of 20
Accessories
Installation Kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical
surface 1 Pipe bracket 1 Adapter plates 2 Screws to attach adapter plate to pipe
bracket 2 Screws to attach module to adapter
plate 2 Band clamps (Note 2 different sizes)
Splice Kit, DBR Tube
OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, three gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-003.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 27 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G DLS Datalogging Rotary Remote for meters and instruments with factory-installed pulse outputs Meter or Instrument: See Meter Compatibility List (Itron part number: PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number Notes
100G DLS Datalogging ERT Module (100G DLN), Remote Mount
ERG-5006-503 (with lead wires)
Customer has the option to receive direct shipments or drop ship modules from Itron to GE Dresser, Sensus, or Romet for connection to new meters. Customer must order ERT-to-meter cable directly from the meter manufacturer. When purchasing modules for GE Dresser meters, the GE Dresser pulser must be version 17 or later to be compatible with the module. For factory programmed modules, order as ERG-5006-503P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item
Description Itron Part Number Notes
Tamper seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Pipe Installation kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical
surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe
bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Splice kit, DBR tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, 3 gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-003.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 28 (800) 635-5461 www.itron.com Rev. Z06
Remote ERT® module: 100G DLS Datalogging Remote for GE Oil & Gas/ Dresser Meters IMC/W2 or MC2, Electronic TC, ETC, or ES3, D800/D1000 Rotary Meter See Meter Compatibility List (Itron part number: PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number Notes
100G DLS Datalogging ERT Module (100G DLS), Remote Mount
ERG-5006-505 (with lead wires)
Customer has the option to receive direct shipments or drop ship modules from Itron to GE Dresser for connection to new meters or instruments. Customer must order cable directly from the meter or instrument manufacturer. For factory programmed modules, order as ERG-5006-505P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts
Item
Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Installation Kit (for wall or pipe mount) CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Splice Kit, DBR Tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, three gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size = 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number TDC-0978-003.
100G Series ERT Module Installation Guide, Remote Mount
TDC-0824-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 29 (800) 635-5461 www.itron.com Rev. Z06
Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Elster American Meter Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Direct Mount
OWG-5002-001 Note: MSE-0159-003 magnet is required to program the 2.4GZ. For factory programmed modules, order as OWG-5002-001P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Index Cover MLD-0200-002 1 cover required per module Covers sold in box quantity of 20
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 30 (800) 635-5461 www.itron.com Rev. Z06
Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sensus (Invensys, Equimeter, Rockwell) 11-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Direct Mount
OWG-5002-002 Note: MSE-0159-003 magnet is required to program the 2.4GZ. For factory programmed modules, order as OWG-5002-002P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 31 (800) 635-5461 www.itron.com Rev. Z06
Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sensus (Invensys, Equimeter, Rockwell) 16-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Direct Mount
OWG-5002-003 Note: MSE-0159-003 magnet is required to program the 2.4GZ. For factory programmed modules, order as OWG-5002-003P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 32 (800) 635-5461 www.itron.com Rev. Z06
Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sensus (Invensys, Equimeter, Rockwell) 18-Tooth Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Direct Mount
OWG-5002-004 Note: MSE-0159-003 magnet is required to program the 2.4GZ. For factory programmed modules, order as OWG-5002-004P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-006 1 cover required per module Sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module Tamper seals sold in bag quantity of 20
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 33 (800) 635-5461 www.itron.com Rev. Z06
Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Itron (Sprague, Schlumberger, Actaris) Order in multiples of 20 (box quantity), tamper seals included. Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Direct Mount
OWG-5002-005 Note: MSE-0159-003 magnet is required to program the 2.4GZ. For factory programmed modules, order as OWG-5002-005P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-014 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
1A Adapter Plate Kit (for flat-faced meters) CFG-0015-001
One kit required per flat-faced meter Kit includes: Adapter shim plate (1) Index cover mounting screws (4) Drive dog (2) Adapter plate mounting screws (3)
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 34 (800) 635-5461 www.itron.com Rev. Z06
Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sprague 175RM Order in multiples of 20 (box quantity), tamper seals and hardware included.
Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Direct Mount
OWG-5002-009 Note: MSE-0159-003 magnet is required to program the 2.4GZ.
For factory programmed modules, order as OWG-5002-009P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts
Item Description Itron Part Number Notes
Index Cover MLD-2400-004 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Mounting screws SCR-0175-002 4 screws required per module Screws sold in bag quantity of 100
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 35 (800) 635-5461 www.itron.com Rev. Z06
Residential gas module: 2.4GZ OpenWay®, Smart Energy 1.0 National (Lancaster) Order in multiples of 20 (box quantity), tamper seals and hardware included.
Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Direct Mount
OWG-5002-006 Note: MSE-0159-003 magnet is required to program the 2.4GZ.
For factory programmed modules, order as OWG-5002-006P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Cover MLD-0200-019 1 cover required per module Covers sold in box quantity of 20
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Index Mounting Screws (for index mounting plate with “legs”)
SCR-0017-001 2 screws required per module Screws sold in bag quantity of 44
Index Mounting Screws (for index back plates with through-holes)
SCR-0037-001 2 screws required per module Screws sold in bag quantity of 22
Mounting Screws SCR-0014-004 2 screws required per module
Screws sold in bag of quantity 22
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 36 (800) 635-5461 www.itron.com Rev. Z06
Commercial gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Elster American Order in multiples of 10 (box quantity), tamper seals and hardware included.
Module Description Itron Part Number
2.4GZ OpenWay Gas Module Commercial Smart Energy 1.0, Direct Mount
OWG-5002-007 Note: MSE-0159-003 magnet is required to program the 2.4GZ. For factory programmed modules, order as OWG-5002-007P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index cover tamper seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Mounting plate tamper seals OPT-0004-001 4 seals required per module
Seals sold in bag quantity of 40
Mounting Screws (3.25” length) with tamper holes
SCR-0062-001 4 screws required per module Screws sold in individual quantities.
Internal Tooth Lock Washers (used with metal mounting plate)
WSH-0003-006 4 washers required per module Washers sold in bag quantity of 40
Accessories
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
Hardware Kit CFG-5002-007
One kit accommodates ten modules. Kit includes: 40 mounting screws 40 internal tooth washers 40 mounting plate tamper seals 20 index cover tamper seals
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 37 (800) 635-5461 www.itron.com Rev. Z06
Commercial gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Sensus (Invensys, Equimeter, Rockwell) Order in multiples of 10 (box quantity), tamper seals and hardware included. Module Description Itron Part Number
2.4GZ OpenWay Gas Module Commercial Smart Energy 1.0, Direct Mount
OWG-5002-008 Note: MSE-0159-003 magnet is required to program the 2.4GZ. For factory programmed modules, order as OWG-5002-008P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Index Mounting Screws (2.94” length) SCR-0062-003 2 screws required per module
Screws sold in bag quantity of 20
Module Mounting Screws with tamper holes (3.63” length)
SCR-0062-002 2 screws required per module Screws sold in bag quantity of 20
Internal Tooth Lock Washers WSH-0003-006 4 washers required per module
Washer sold in bag quantity of 40
Steel Flat Washer WSH-0020-005 2 washers required per module
Washer sold in bag quantity of 20
Cork Flat Washer WSH-0032-001 2 washers required per module
Washers sold in bag quantity of 20
Accessories
Hardware Kit CFG-5002-008
One kit accommodates ten modules. Kit includes: 20 Mounting screws 20 Mounting screws 40 Internal tooth washers 20 flat washers 20 cork washers
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4GZ OpenWay Gas Module Installation Guide, Direct Mount
TDC-0816-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 38 (800) 635-5461 www.itron.com Rev. Z06
Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Remote with Encoder Cable Meter: See Compatibility List (Itron part number PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Remote Mount
OWG-5002-601: 2.5’ cable with encoder For factory programmed modules, order as OWG-5002-601P. A customer-generated configuration file must accompany factory programmed module orders. (Note CFG-0081-001 kit and 013-1723-112 spacing tool required)
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module Seals sold in bag quantity of 20
Accessories
Acetone Applicator Stick MSC-0020-002 Acetone sticks sold in bag quantity of 30
Installation Kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band Clamps (Note 2 different sizes)
Encoder Spacing Tool 013-1723-112
Required for proper placement of encoder to index. Encoder spacing tool may be used for multiple installations. Encoder spacing tool sold in individual quantities.
Remote Installation Kit for encoder CFG-0081-001
One kit accommodates one module. Kit includes: 1 Acetone applicator stick (A) 1 Magnet hub spacer (E) 1 Magnet hub (F) 3 Screws to mount module to flat vertical surface (D) 2 Tamper seals (B) 3 Cable ties (C) (Note 2 different sizes)
Itron Magnet MSE-0159-003 Required for programming. Magnet may be used for
multiple installations. Magnet sold in individual quantities
Curb Meter Kit CFG-2400-501
Required for Elster American AC-425 and AC-630 curb meters. One kit per meter quantity of 20 index covers, 40 tamper seals per box.
Splice Kit, DBR Tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, 3 gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number ENG-2400-500.
2.4GZ OpenWay Gas Module Installation Guide, Remote Mount
TDC-0838-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 39 (800) 635-5461 www.itron.com Rev. Z06
Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Volume Corrector Remote Instrument or Meter: See Compatibility List (Itron part number PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Remote Mount
OWG-5002-602: 5’ cable For factory programmed modules, order as OWG-5002-602P.
A customer-generated configuration file must accompany factory programmed module orders.
Customer has the option to receive direct shipments or drop ship modules from Itron to meter or instrument manufacturer.
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals
OPT-0002-003
2 seals required per module Seals sold in bag quantity of 20
Accessories
Installation Kit (for wall or pipe mount) CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Itron Magnet MSE-0159-003
Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
Splice Kit, DBR Tube
OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, three gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number ENG-2400-500.
2.4GZ OpenWay Gas Module Installation Guide, Remote Mount
TDC-0838-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 40 (800) 635-5461 www.itron.com Rev. Z06
Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Rotary Remote for meters or instruments with factory-installed pulse outputs Meter or Instrument: See Meter Compatibility List (Itron part number: PUB-0117-002) Order in multiples of 20 (box quantity) Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Remote Mount
OWG-5002-603 (with lead wires) Customer has the option to receive direct shipments or drop ship modules from Itron to Dresser, Sensus, or Romet for connection to new meters. When purchasing modules for GE Oil & Gas Dresser meters, the Dresser pulser must be version 17 or later to be compatible with the module. For factory programmed modules, order as OWG-5002-603P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Installation Kit (for wall or pipe mount) CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Itron Magnet MSE-0159-003
Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
Splice Kit, DBR Tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; max. cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, three gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number ENG-2400-500.
2.4GZ OpenWay Gas Module Installation Guide, Remote Mount
TDC-0838-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 41 (800) 635-5461 www.itron.com Rev. Z06
Remote gas module: 2.4GZ OpenWay®, Smart Energy 1.0 Remote for Honeywell Mercury Instrument Temperature Compensated Index (TCI) Order in multiples of 20 (box quantity) Module Description Itron Part Number
2.4GZ OpenWay Gas Module Smart Energy 1.0, Remote Mount
OWG-5002-604 (with lead wires) Customer has the option to receive direct shipments or drop ship modules from Itron to Mercury Instrument for connection to new instruments. For factory programmed modules, order as OWG-5002-604P. A customer-generated configuration file must accompany factory programmed module orders.
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 seals required per module
Seals sold in bag quantity of 20
Accessories
Installation Kit (for wall or pipe mount) CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Itron Magnet MSE-0159-003
Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
Splice Kit, DBR Tube OEM-0034-002
For use with gas remote modules. Splicing a cable requires this kit; maximum cable length should not exceed 300 feet. Minimum order is 10 kits. Kit includes DBR tube, 3 gel connectors (CON-0023-001), and one instruction sheet (MAN-0022-001).
Extension cable CBA-0067-001
Typical roll size is 1000 feet. Maximum cable length per module can be up to 300 feet including cable extending out of the device. For detailed information on additional cabling to specific module, reference Itron Entity Parameter document, part number ENG-2400-500.
2.4GZ OpenWay Gas Module Installation Guide, Remote Mount
TDC-0838-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 42 (800) 635-5461 www.itron.com Rev. Z06
Range extender: 2.4ZR OpenWay®, Smart Energy 1.0
Order in multiples of 20 (box quantity) Module Description Itron Part Number
2.4ZR OpenWay Range Extender SEP, Battery Operated
OWR-1001-001 Includes two tamper seals and three mounting screws. Compatible with Itron Private Profile (IPP) 2.4GZ OpenWay gas modules.
Replacement Parts Item Description Itron Part Number Notes
Tamper Seals OPT-0002-003 2 required per module
Sold in bag quantity of 40
Accessories
Pipe Installation Kit (for wall or pipe mount) CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
Itron Magnet MSE-0159-003
Required for programming. Magnet may be used for multiple installations. Magnet sold in individual quantities.
2.4ZR OpenWay Range Extender Installation Guide
TDC-0832-00X
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 43 (800) 635-5461 www.itron.com Rev. Z06
Battery Replacement Kit for use on all 40 Series Gas ERT® Modules
Battery replacement kit is for use with 40G and 40GB ERT modules. Kit must be ordered separately and is sold in quantities of 60. Kit includes:
Item Description Itron Part Number Notes
Replacement Battery with foam spacer Replacement Battery Replacement Battery
CFG-0070-001 CFG-0070-002 CFG-0070-003
All modules except Elster American commercial and remote. Remote module Elster American Commercial module
3M Gel Connector CON-0023-001
120 connectors provided per battery replacement kit. Sold in bag quantity of 30.
40G/GB Instruction Guide for Battery Replacement PUB-0119-001
Required Accessories. All items must be ordered separately for your specific application. Item Description Itron Part Number Notes
Battery Replacement Tool Commercial Battery Replacement Tool
OEM-0036-001*
FAB-0150-001*
For all modules except Elster American commercial. Elster American commercial module only.
Cork replacement gaskets (can only be used on ERTs with cork gaskets)
FAB-0012-001 National/Lancaster FAB-0012-002 Elster American FAB-0012-003 Sensus/Rockwell FAB-0012-004 Itron/Sprague
Gasket not applicable to 5 metric residential, commercial, or remote modules.
Index cover tamper seals OPT-0002-003
All modules except Elster American commercial. Each module requires two seals. Seals sold in bag quantity of 20
Mounting plate tamper seals OPT-0004-001
Elster American commercial module. Each module requires 4 seals. Seals sold in bag quantity of 40.
Crimping Tool HWR-0254-001* Used to crimp gel connectors
*One tool must be ordered with initial 60 piece kit order. Order the appropriate battery replacement tool for your application. Additional tools may be ordered as desired.
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 44 (800) 635-5461 www.itron.com Rev. Z06
Telemetry module: 100T-HON Honeywell Telemetry Module Application: See Compatibility List (Itron part number PUB-0117-002)
Order in multiples of 20 (box quantity) Item Description Itron Part Number
100T-HON Honeywell Telemetry Module
TEL-1000-002: 5’ cable
Customer must order RS232 adapter kit (Honeywell part number 22-2718-kit) directly from Honeywell.
When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Replacement Parts
Item Description Itron Part Number Notes
Tamper Seals
OPT-0002-003
2 seals required per module Seals sold in bag quantity of 20.
Accessories
Pipe Installation Kit (for wall or pipe mount)
CFG-0005-003
One kit accommodates one module. Kit includes: 2 Cable ties 2 Tamper plugs 3 Screws to attach module to flat vertical
surface 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe
bracket 2 Screws to attach module to adapter plate 2 Band clamps (Note 2 different sizes)
100T-HON Honeywell Telemetry Module Installation Guide
TDC-1346-XXX
Itron Inc. PUB-0117-001 2111 N. Molter Rd. Liberty Lake, WA 99019 Proprietary and Confidential Page 45 (800) 635-5461 www.itron.com Rev. Z06
Telemetry module: 100T-CP Cathodic Protection Telemetry Module Application: See Compatibility List (Itron part number PUB-0117-002)
Order in multiples of 10 (box quantity) Item Description Itron Part Number
100T-CP Cathodic Protection Telemetry Module
TEL-1000-003: 2’ cable For factory programmed modules, order as TEL-1000-003P. A customer-generated configuration file must accompany factory programmed module orders. When purchasing security keys for enhanced security, also order part number SEC-0000-001.
Hardware Kit (for pipe mount) CFG-5006-701
One kit accompanies each 100T-CP module. Kit includes: 2 Tamper plugs 1 Pipe bracket 1 Adapter plate 2 Screws to attach adapter plate to pipe
bracket 2 Screws to attach module to adapter plate Band clamp Lightning Suppressor Kit
Electrical Contact Grease MSC-0050-001
One tube provided in each shipping box (one tube per 10 modules).
Replacement Parts
Item Description Itron Part Number Notes
Tamper Seals
OPT-0002-003
2 seals required per module Seals sold in bag quantity of 20.
Lightning Suppressor Kit
CFG-5006-710
Kit includes: Lightning suppressor 2 gel connectors
Accessories
100T-CP Cathodic Protection Telemetry Module Installation Guide
TDC-1344-XXX
