8 From compound asbestos free and PTFE sheets, our sealing solutions. GASKETS INDEX OF GASKETS SX 2200 10 SX 2201 11 SX 2202 12 SX 2203 13 SX 2204 14 SX 2205 15 SX 2206 16 SX 2207 17 SX 2208 18 SX 2209 19 SX 2210 20 SX 2211 21 SX 2213 22 SX 2214 23 SX 2600 24 SX 2601 25 SX 2602 26 COMPRESSED SYNTHETIC FIBRE JOINTING SHEETS Seal X offers a number of asbestos free synthetic fibre jointing sheets designed for a wide range of applications required for specific sealing solutions. A wide range of grades are available for many different applications. e jointing can be supplied as a sheet or cut gaskets, both supplied in either standard or non-standard dimensions. PTFE PRODUCTS Seal X offers a comprehensive range of modified and expanded PTFE sealing products designed for applications where chemical resistance is paramount or where food safety is a requirement. Our modified PTFE is reinforced with heat resistant filler. e modification of the molecular structure of the polymer and a special production process that determines the isotropic orientation of the components in the plane of the gasket, form the basis of the outstanding mechanical characteristics of this material that combine with the already well- known excellent chemical properties of the PTFE. e seal capacity is excellent at low compression and at elevated temperatures. APPLICATIONS Seal X products are recommended for reducing leakages with chemically aggressive substances. ese products are ideal for the chemical, petro-chemical, paper mill, oil, gas, food, and pharmaceutical applications. We strive to provide customers with leading solutions and high performance products to suit all specific needs. Please contact our Technical Sales Team
Transcript
8
From compound asbestos free and PTFE sheets, our sealing solutions.
COMPRESSED SYNTHETIC FIBRE JOINTING SHEETSSeal X offers a number of asbestos free synthetic fibre jointing sheets designed for a wide range of applications required for specific sealing solutions. A wide range of grades are available for many different applications. The jointing can be supplied as a sheet or cut gaskets, both supplied in either standard or non-standard dimensions.
PTFE PRODUCTSSeal X offers a comprehensive range of modified and expanded PTFE sealing products designed for applications where chemical resistance is paramount or where food safety is a requirement. Our modified PTFE is reinforced with heat resistant filler. The modification of the molecular structure of the polymer and a special production process that determines the isotropic orientation of the components in the plane of the gasket, form the basis of the outstanding mechanical characteristics of this material that combine with the already well-known excellent chemical properties of the PTFE. The seal capacity is excellent at low compression and at elevated temperatures.
APPLICATIONSSeal X products are recommended for reducing leakages with chemically aggressive substances.These products are ideal for the chemical, petro-chemical, paper mill, oil, gas, food, and pharmaceutical applications.
We strive to provide customers with leading solutions and high performance products to suit all specific needs. Please contact our Technical Sales Team
10
SX2200 GASKETS SX2201 GASKETS
SX 2200
Code: wdb20
www.sealxsupply.com
Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010
CHARACTERISTICS Improved compression and wear resistance; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity.
Main applications:It is the most commonly used filler for dynamic seal applications where both rotating and alternating movements are involved, pneumatic, hydraulic and mechanical parts. Bearings; Seals; Gaskets.
Statement on suitability for contact with food:We certify that our ptfe products are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 § 177.1550 (a) (1) and (b)-Perfluorocarbon Resins.
The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item’s technological fitness it is assigned to, may be guaranteed.
Property Method Unit Specification
SX2601 Technical Sheet
SX2601 Compression moulded PTFE
CHARACTERISTICS Excellent resistance to deformation; high recovery; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity.
Main applications:Piping systems, apparatus flanges also with reduced stress or damaged surface, seals, gaskets, valve seats, piston rings.
Statement on suitability for contact with food:We certify that our ptfe products are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 § 177.1550 (a) (1) and (b)-Perfluorocarbon Resins.
The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item’s technological fitness it is assigned to, may be guaranteed.
Property Method Unit Specification
26
SX2602
SX2602 Technical Sheet
SX2602 Compression moulded PTFE
CHARACTERISTICS Excellent resistance to deformation; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity.
Main applications:Bearings, seals, gaskets, moldings, valve seats, piston rings.
Statement on suitability for contact with foodstuff:We certify that our ptfe products, are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 § 177.1550 (a) (1) and (b)-Perfluorocarbon Resins.
The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item’s technoiogical fitness it is assigned to, may be guaranteed.
![Untitled-1 []PTFE, PGA, FEP, PUDF & POLYPRO: Hose & Fittings PFA Encapsulated Fittings Tubing (1/2"-6") Pipe (1/2"-6") Diaphragms TASK-LINE' Gaskets Gaskets Riload' Bearings PTFE Bearinjs](https://static.documents.pub/doc/80x56/5ebb6457aa66ba72592dcdda/untitled-1-ptfe-pga-fep-pudf-polypro-hose-fittings-pfa-encapsulated.jpg)