Gate ValveIsolation Service

‘FM’ Bi-directional Gate Valves are used for isolation services in

Oil & Gas, Petrochemical, Fossil Fuel and Nuclear Power, Steel,

Chemical, Fertilizer, Mining and Solar sectors offering excellent

shut-off features and minimal pressure loss through the valve.

‘FM’ Gate Valves are also built versatile for Pneumatic, Gas,

Electrical and Electronically controlled actuator, serving a host of

process lines. Two wire control system with logic and

programmability resulting in direct reduction of cable cost,

simplified engineering, faster and easier commissioning can also

be provided.

Gate Valves

2

Forbes Marshall is a leader in the area of process efficiency and energy conservation for the process industry. We have

sixty years of experience building steam engineering and control instrumentation solutions with focussed investments

in manufacturing and research and development. We deliver quality solutions in 18 countries. Forbes Marshall is

unique in having extensive expertise in both steam and control instrumentation. This dual expertise has allowed us to

engineer industry specific systems that focus on energy efficiency, environment and process efficiency for diverse

sectors.

Our technical teams are staffed by highly competent engineers. These highly trained professionals have developed

innovative solutions and saved thousands of dollars in process costs for our clients. Our business practices and

processes have combined into a singular philosophy of being trusted partners who provide innovative solutions. It's a

philosophy we are proud to live up to.

We have long standing partnerships with some of the best names in the control instrumentation industry such as Arca,

Codel, Krohne and Shinkawa, to develop, design and supply innovative solutions for measurement and monitoring of

process parameters. With a combination of specialist knowledge and the latest technology, we provide products and

solutions to achieve optimum efficiency. Our products are a unique combination of hardware and software that make

them reliable and accurate.

Cast Steel Bolted Bonnet

• Outside screw and yoke construction

• Flanged end or buttwelding end

• Valves provided with back seating arrangement

• Solid, flexible, spilt wedge, double disc and parallel slide are available

• Specially designed die formed graphite packings, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions. Meet 100 ppm maximum fugitive emission levels.

• Renewable seal welded seat ring or integral seat (cast S.S. only) available

• Deep stuffing box with Lantern ring optional

• Self aligning two piece gland

• Anti-friction ball thrust bearing in yoke sleeve for higher sizes and classes

• Locking arrangement optional

• Bi-directional shut off

• Optional gear, electric or pneumatic actuator.

• Meets design requirement of ASME B16.34 / API 600 / API 603 / API 6D / IBRand testing requirement of API 598 / B S EN 12266-1 / API 6D

• Flanged end dimensions conform to ASME B16.5 / API 605 / BS 3293

• Ring joint facings available in higher classes

• Buttwelding end dimensions conform to ASME B16.25

• Face to Face dimensions conform to ASME B16.10 / BS 2080

• Meets requirement of NACE MR-01-75

Features

Materials

DETAIL - RENEWABLESEALWELDED SEAT

DETAIL - A

1

7

6

8

5

3

2

9

4

13

10

11

14

12

15

16

17

18

19

Part Name WCB LCB WC6 WC9

05 Stud and Nut A 193 Gr B7/A194 Gr2H A320 Gr L7/A194 Gr4 A93 Gr B16/A 194 Gr 4/7 A93 Gr B16/ A194 Gr 4/7

04 Gland packing GRAFOIL GRAFOIL GRAFOIL GRAFOIL

03 Gasket Spiral Wound / Soft Iron Spiral Wound / Soft Iron Spiral Wound /SS304 Spiral Wound / SS 304

02 Bonnet A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9

01 Body A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217Gr WC9

Part Name C5 C12 CF8 CF8M

05 Stud and Nut A193 Gr B16/A194 Gr 4/7 A193 Gr/A194 Gr 4/7 A193 Gr B7/A194 Gr 2H A93 Gr B7/ A194 Gr 2H

04 Gland Packing GRAFOIL GRAFOIL GRAFOIL GRAFOIL

03 Gasket Spiral Wound / Soft Iron Spiral Wound / Soft Iron Spiral Wound / SS 304 Spiral Wound / SS 316

02 Bonnet A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M

01 Body A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M

Part Name Material

19 Grease Nipple Carbon Steel

18 Grub Screw Carbon Steel

17 Hand Wheel Nut Carbon Steel

16 Hand Wheel Malleable Iron / Cast Steel / Ductile Iron / Fabricated Steel

15 Yoke Nut Carbon Steel / SS 304

14 Eye Bolt and Nut Forged Carbon Steel

13 Cross Bolt and Nut Forged Carbon Steel

12 Yoke Sleeve A 439-D2 / Al, Bronze, BS 1400, AB2C

11 Gland Flange Carbon Steel / Equivalent to Body Material

10 Gland Bush

09 Back Seat

08 Spindle See page 5

07 Seat Ring Trim and Surface Material

06 Gate

3

Cast Steel Pressure Seal Bonnet

• Outside screw and yoke construction

• Flanged end or buttwelding end

• Valves provided with back seating arrangement

• Solid, flexible, spilt wedge, double disc and parallel slide are available

• Specially designed die formed graphite packings, controlled clearance between stem gland and bonnet bushing for guaranteed low emissions. Meet 100 ppm maximum fugitive emission levels.

• Renewable seal welded seat ring or integral seat (cast S.S. only) available

• Deep stuffing box with Lantern ring optional

• Self aligning two piece gland

• Anti-friction ball thrust bearing in yoke sleeve for higher sizes and classes

• Locking arrangement optional

• Bi-directional shut off

• Optional gear, electric or pneumatic actuator available

• Meets design requirement of ASME B16.34 / API 600 / API 603 / API 6D / BS EN 10434 and testing requirement of API 598 / BS EN 12266-1 / API 6D

• Gasket design ensures self sealing under pressure

• Flanged end dimensions conform to ASME B16.5 / API 605 / BS 3293

• Ring joint facings available in higher classes

• Buttwelding end dimensions conform to ASME B16.10

• Face to Face dimensions conform to ASME B16.10 / BS 2080

• Meets requirement of NACE MR-01-75

Features

Materials

Part Name Material23 Grease Nipple Carbon Steel

22 Grub Screw Carbon Steel

21 Hand Wheel Nut Carbon Steel

20 Hand Wheel Malleable Iron / Cast Steel / Ductile Iron / Fabricated Steel

19 Yoke Nut Carbon Steel / SS 304

18 Eye Bolt and Nut Forged Carbon Steel

17 Cross Bolt and Nut Forged Carbon Steel

16 Yoke Sleeve A 439-D2 / Al, Bronze, BS 1400, AB2C

15 Gland Flange Carbon Steel / Equivalent to Body Material

14 Gland Bush

13 Clamp

12 Back Seat

11 Spindle See page 5

10 Seat Ring Trim and Surface Material

09 Gate / Wedge

Part Name WCB LCB WC6 WC908 Stud and Nut A 193 Gr B7/A194 Gr2H A320 Gr L7/A194 Gr4 A93 Gr B16/A 194 Gr 4/7 A93 Gr B16/ A194 Gr 4/7

07 Gland packing GRAFOIL GRAFOIL GRAFOIL GRAFOIL

06 Gasket Soft Iron Soft Iron SS304 SS 304

05 Bonnet A217 Gr CA15 A351 Gr CF8 A217 Gr CA15 A217 Gr CA15

04 Back Up Ring A217 Gr CA15 A351 Gr CF8 A217 Gr CA15 A217 Gr CA15

03 Yoke A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9

02 Bonnet A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9

01 Body A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9

Part Name C5 C12 CF8 CF8M08 Stud and Nut A193 Gr B16/A194 Gr 4/7 A193 Gr/A194 Gr 4/7 A193 Gr B7/A194 Gr 2H A93 Gr B7/ A194 Gr 2H

07 Gland Packing GRAFOIL GRAFOIL GRAFOIL GRAFOIL

06 Gasket SS304 SS304 SS304 SS316

05 Thrust Ring A217 Gr CA15 A217 Gr CA15 A351 Gr CF8 A351 Gr CF8M

04 Back Up Ring A217 Gr CA15 A217 Gr CA15 A351 Gr CF8 A351 Gr CF8M

03 Yoke A217 Gr CS A217 Gr C12 A351 Gr CF8 A351 Gr CF8M

02 Bonnet A217 Gr CS A217 Gr C12 A351 Gr CF8 A351 Gr CF8M

01 Body A217 Gr CS A217 Gr C12 A351 Gr CF8 A351 Gr CF8M

A Back Up Ring : Absorbs thrust applied by internal pressure

B Thrust Ring : Protects the Soft Metallic gasket from deformation

C Gasket : Unique angular design provides superior sealing

16

10

12

65

8

17

14

19

21

18

20

22

23

15

13

7

3

4

2

11

1

9

4

Nominal Seating Surface Materials

Cr = Chromium, Ni = Nickel, Co = Cobalt, Cu = Copper (F) Case hardened by Nitriding to a thickness of 0.13 mm (0.005 inch) minimum.(A) HB (formerly BHN) is the symbol for Brinell hardness number as per

ASMTM E 10. (G) This classification includes such trademarked material as Stellite 6 TM, Colmonoy TM, Stoody 6T TM and Wallex 6 TM.(B) Free machining grade of 13Cr are prohibited

(H) Manufacturers Standard hardfacing with a maximum iron content(C) Body and gate seat surfaces should be 250 HB minimum with a 50 HBof 2.5 percent.minimum differential between the body and gate seat surfaces.

(I) Hardness differential between the body and gate seat surface shall be the (D) Manufacturers standard hardness.Manufacturers standard.

(E) Differential hardness between the body and gate seat surface is not required.(J) Manufacturers standard with 30 Ni minimum.

Seat Surface Typical Specification (Grade)Trim Nominal Hardness MaterialNo. Trim (HB, A Minimum) Type Cast Forged Welded

1 F6 C 13Cr ASTM A217 (CA15) ASTM A105 (F6a) AWS A5.9 ER410

2 304 D 18Cr-8Ni ASTM A351 (CF8) ASTM A182 (F304) AWS A5.9 ER308

3 F310 D 25Cr-20Ni ASTM A182 (F310) AWS A5.9 ER310

4 Hard F6 750 (E) Hard 13Cr F

5 Hardfaced 350 (E) Co-Cr A (G) AWS A5.13 E or R CoCr-A

5A Hardfaced 350 (E) Ni-Cr H

6 F6 and 250 (I) and 13Cr and ASTM A217 (CA15) ASTM A182 (F6a) AWS A5.9 ER410Cu-Ni 175 (I) Cu-Ni J

7 F6 and 250 (I) and 13Cr and ASTM A217 (CA15) ASTM A182 (F6a) AWS A5.9 ER410Hard F6 750 (I) Hard 13Cr F

8 F6 and 250 (I) and 13Cr and ASTM A217 (CA15) ASTM A182 (F6a) AWS A5.9 ER410 /Hardfaced 350 (I) Co-Cr A (G) AWS A5.13 E or R CoCr-A

8A F6 and 250 (I) and 13Cr and ASTM A217 (CA15) ASTM A182 (F6a) AWS A5.9 ER410Hardened 350 (I) Ni-Cr H

9 Monel D Ni-Cu Alloy FM Standard

10 316 D 18Cr-8Ni ASTM A351 (CF8M) ASTM A182 (F316) AWS A5.9 ER316

11 Monel and Hardfaced D and 350 (I) Ni-Cu alloy and Trim 5 or 5A FM Standard See Trim 5 or 5A

12 316 and Hardfaced D and 350 (I) 18Cr-8Ni-Mo Trim 5 and 5A ASTM A351 (CF8M) ASTM A182 (F316) AWS A5.9 ER316 See Trim 5 or 5A

13 Alloy 20 D 19Cr-29Ni ASTM A351 (CN7M) ASTM B 473 AWS A15.9 ER320

14 Alloy 20 and Hardfaced D and 350 (I) 19Cr-29Ni and Trim 5 and 5A ASTM A351 (CN7M) ASTM B 473 AWS A5.9 ER320 /See Trim 5 or 5A

5

Range of Shell Material and MaterialRecommended Trim

and Temperature Low Pressure High Pressure

Carbon Steel A216 Gr. WCB Non corrosive water, oil and gas30ºC to 430ºC (86ºF to 806ºF)

Low Temperature Service Cryogenic Service Low Temperature

Carbon Steel A352 Gr. LCB -46ºC to 343ºC (-50ºF to 650ºF) 2 / 12 12 / 5

A352 Gr. LC2 -73ºC to 343ºC (-100ºF to 650ºF)

A352 Gr. LC3 -101ºC to 343ºC (-150ºF to 650ºF)

Alloy Steel A217 Gr. WC1 Non corrosive water, oil and gas and steam -29ºC to 425ºC (-20ºF to 800ºF)

1 1/4% Cr - 1/2% Mo A217 Gr. WC6 Non corrosive water, oil and gas 1 / 5 5

2 1/4% Cr - 1% Mo A217 Gr. WC9 -10º to 593ºC (14ºF to 1100ºF)

5% Cr - 1/2% Mo A217 Gr. C5 Corrosive water, oil and gas 8 / 5 5

9% Cr - 1% Mo A217 Gr. C12 -10º to 649ºC (14ºF t0 1200ºF)

Cast Stainless Steel Corrosive high temperature service 10 / 12 5

18% Cr - 8% Ni A351 Gr. CF8 -10º to 816ºC (14ºF to 1500ºF)

17% Cr - 8% Ni A351 Gr. CF3 -10º to 427ºC (14ºF to 800ºF)

18% Cr - 9% Ni - 2% Mo A351 Gr. CF8M -10º to 649ºC (14ºF to 1200ºF)

17% Cr - 9% Ni - 2% Mo A351 Gr. CF3M -10º to 454ºC (14ºF to 850ºF)

18% Cr - 9% Ni-cb A351 Gr. CF8C -10º to 816ºC (14ºF to 1500ºF)

25% Cr - 5Ni - Mo - Cu (Duplex 1A) A890 CD4MCu -80º to 300ºC (-112ºF to 572ºF) Duplex 1A Duplex 1A

24% Cr - 10Ni - Mo - N (Duplex 2A) A890 CE8MN -80º to 300ºC (-112ºF to 572ºF) Duplex 2A Duplex 2A

25% Cr - 5Ni - Mo - N (Duplex 3A) A890 CD6MN -80º to 300ºC (-112ºF to 572ºF) Duplex 3A Duplex 3A

22% Cr - 5Ni - Mo - N (Duplex 4A) A890 CD3MN -80º to 300ºC (-112ºF to 572ºF) Duplex 4A Duplex 4A

25% Cr - 7Ni - Mo - N (Duplex 5A) A890 CE3MN -80º to 300ºC (-112ºF to 572ºF) Duplex 5A Duplex 5A

25% Cr - 7Ni - Mo - N (Duplex 6A) A890 CD3MWCuN -80º to 300ºC (-112ºF to 572ºF) Duplex 6A Duplex 6A

INCONEL 625 A494 CW6MC -157º to 982ºC (-250ºF to 1800ºF) INCONEL 625 INCONEL 625

INCOLOY 825 A494 CU5MCuC -253º to 540ºC (-424ºF to 1000ºF) INCOLOY 825 INCOLOY 825

Material Type ASTM / BS Service Condition Recommended Trim

Dimensions

Cast Steel Bolted Bonnet (Imperial Units)

Class 150

Size

L-RF inch 7.0 7.5 8.0 9.0 10.0 10.5 11.5 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0

L1-BW inch 8.5 9.5 11.1 12.0 15.0 15.9 16.5 18.0 19.8 22.5 24.0 26.0 28.0 32.0 34.0 36.0 36.0

H inch 16.7 17.1 21.1 23.6 27.8 31.5 39.8 49.2 54.5 62.0 71.9 76.8 81.9 95.5 108.3 111.2 125.0

K inch 7.9 7.9 9.8 9.8 11.0 11.8 13.8 17.7 19.7 13.8 13.8 13.8 15.7 15.7 17.7 17.7 19.7

Wt. (approx) lbs 49 64 82 124 172 185 304 463 683 992 1246 1631 2044 2480 3142 3417 4299

inch 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30

Class 300

Size

L, L1-RF, BW inch 8.5 9.5 11.1 12.0 15.0 15.9 16.5 18.0 19.8 30.0 33.0 36.0 39.0 45.0 49.0

H inch 16.9 18.7 21.1 23.8 28.1 33.3 42.3 49.6 56.1 62.4 72.6 78.5 85.6 104.3 112.2

K inch 7.9 7.9 9.8 11.8 11.8 13.8 17.7 19.7 19.7 13.8 15.7 17.7 17.7 19.7 19.7

Wt. (approx) lbs 62 88 117 176 276 335 540 794 1173 1598 2094 2976 3633 5181 5512

inch 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26

Class 600

Size

L, L1-RF, BW inch 11.5 13.0 14.0 17.0 20.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0

H inch 17.3 19.7 21.5 28.3 28.7 33.5 47.2 54.7 62.2 65.2 75.0 79.1 89.6 110.6

K inch 9.8 9.8 11.8 13.8 15.7 19.7 23.6 23.6 15.7 17.7 17.7 19.7 19.7 21.7

Wt. (approx) lbs 84 135 150 271 392 496 948 1609 1874 2866 3858 4960 5401 9039

inch 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24

6

Cast Steel Bolted Bonnet

Class 150L

H

K

Class 150

Size NB 50 65 80 100 125 150 200 250 300 350 400 450 500 600 650 700 750

L-RF mm 178 190 203 229 254 267 292 330 356 381.0 406.0 432.0 457.0 508.0 559.0 610.0 660.0

L1-BW mm 216 241 282 305 381 403 419 457 502 572.0 610.0 660.0 711.0 813.0 864.0 914.0 914.0

H mm 425 435 535 600 705 800 1010 1250 1385 1575 1825 1950 2080 2425 2750 2825 3175

K mm 200 200 250 250 280 300 350 450 500* 350* 350* 350* 400* 400* 450* 450* 500*

Wt. (approx) kg 22 29 37 56 78 84 138 210 310 450 565 740 927 1125 1425 1550 1950

Class 300

Size

L, L1-RF, BW mm 216 241 282 305 381 403 419 457 502 762.0 838.0 914.0 991.0 1143.0 1245.0

H mm 430 475 535 605 715 845 1075 1260 1425 1585 1845 1995 2175 2650 2850

K mm 200 200 250 300 300 350 450 500 500 350* 400* 450* 450* 500* 500*

Wt. (approx) kg 28 40 53 80 125 152 245 360 532 725 950 1350 1648 2350 2500

NB 50 65 80 100 125 150 200 250 300 350 400 450 500 600 650

Class 600

Size

L, L1-RF, BW mm 292 330 356 432 508 559 660 787 838 889 991 1092 1194 1397

H mm 440 500 545 720 730 850 1200 1390 1580 1655 1905 2010 2275 2810

K mm 250 250 300 350 400 500 600 600 400* 450* 450* 500* 500* 550*

Wt. (approx) kg 38 61 68 123 178 225 430 730 850 1300 1750 2250 2450 4100

NB 50 65 80 100 125 150 200 250 300 350 400 450 500 600

L

H

K

Class 300 & 600

• RF - Flanged • BW - Butt Weld* Gear Operation suggested.

Dimensions

Class 600, 900, 1500 & 2500L

H

K

Cast Steel Pressure Seal Bonnet (Imperial Units)

Class 900

Size

L, L1-RF, BW inch 14.5 16.5 15.0 18.0 22.0 24.0 29.0 33.0 38.0 40.5 44.5 48.0

H inch 21.7 25.4 26.4 31.1 33.7 42.3 48.2 59.1 64.4 72.0 84.4 90.6

K inch 11.8 11.8 11.8 15.7 17.7 11.8 13.8 15.7 15.7 4500.0 19.7 19.7

Wt. (approx) lbs 165 198 212 300 496 606 1080 1819 2535 3307 4630 6063

inch 2 2½ 3 4 5 6 8 10 12 14 16 18

• RF - Flanged • BW - Butt Weld* Gear Operation suggested.

Class 600, 900, 1500 & 2500

K

H

L1

Class 2500

Size

L, L1-RF, BW inch 17.8 20.0 22.8 26.5 31.3 36.0 40.2 50.0 56.0

H inch 23.6 27.4 29.1 35.0 38.2 44.7 53.1 66.1 68.9

K inch 15.7 17.7 11.8 13.8 13.8 13.8 15.7 17.7 17.7

Wt. (approx) lbs 243 287 309 496 650 1091 1819 3263 5291

inch 2 2½ 3 4 5 6 8 10 12

Class 1500

Size

L, L1-RF, BW inch 14.5 16.5 18.5 21.5 26.5 27.8 32.8 39.0 44.5

H inch 22.4 26.4 28.5 33.5 35.0 44.3 48.6 59.8 65.0

K inch 11.8 11.8 11.8 11.8 11.8 13.8 13.8 15.7 15.7

Wt. (approx) lbs 209 243 276 452 564 728 1444 2646 4431

inch 2 2½ 3 4 5 6 8 10 12

Cast Steel Pressure Seal Bonnet

Class 900

Size

L, L1-RF, BW mm 368 419 381 457 559 610 737 838 965 1029 1130 1219

H mm 550 645 670 790 855 1075 1225 1500 1635 1830 2145 2300

K mm 300 300 300 400 450 300* 350* 400* 400* 450* 500* 500*

Wt. (approx) kg 75 90 96 136 225 275 490 825 1150 1500 2100 2750

NB 50 65 80 100 125 150 200 250 300 350 400 450

Class 1500

Size

L, L1-RF, BW mm 368 419 470 546 673 705 832 991 1130

H mm 570 670 725 850 890 1125 1235 1520 1650

K mm 300 300 300* 300* 300* 350* 350* 400* 400*

Wt. (approx) kg 95 110 125 205 256 330 655 1200 2010

NB 50 65 80 100 125 150 200 250 300

Class 2500

Size

L, L1-RF, BW mm 451 508 578 673 794 914 1022 1270 1422

H mm 600 695 740 890 970 1135 1350 1680 1750

K mm 400 450 300* 350* 350* 350* 400* 450* 450*

Wt. (approx) kg 110 130 140 225 295 495 825 1480 2400

NB 50 65 80 100 125 150 200 250 300

7

Notes

8

Exploded view

9

Hand Wheel Nut

Key

Hand Wheel

Yoke Nut

Yoke Sleeve

Gland Flange

Eye Bolt & Nut

Gland Packing

Cross Bolt & Nut

Bonnet

Back Seat

Gasket

Gland Bush

Spindle

Wedge

Seat Ring

Stud & Nuts(Bdy / Bnt)

Body

Doc#

CIG

/0712/3

17/V

1.R

1

INDIA Tel: +91 (0) 20 27442020, Fax: + 91 (0) 20 27442040, Email: exp@forbesmarshall.com 4454, Email: usa@forbesmarshall.net, Tel: + 1 207-781-8831, Fax: + 1 207-781-8830 CANADA Tel: +416.679.0881, Fax: +416.679.0882, Email: canada@forbesmarshall.com COLOMBIA Tel: +57 316 721 1510, Email: fsforbes@gmail.com, ngarzon@forbesmarshall.net BOLIVIA Email: importaciones@fpl-suministros.com VENEZUELA Email: fnunez@termofluidos.com.ve THAILAND Tel: +66 2 7203483/4 +66-81-9020690, Fax: +66 2 7203483, 9435500, Email: thailand@forbesmarshall.com, vphillip@ksc.th.com INDONESIA Tel: +62 8 15199 17178, Email: hbhat@forbesmarshall.com SINGAPORE Email: vedasingapore@gmail.com, hbhat@forbesmarshall.com VIETNAM Email: dinhphucvp@gmailcom, thailand@forbesmarshall.com MALAYSIA Email: ccchang@tm.net.my , wendyooi@leesonmech.com, microconeingineering@gmail.com ,

hbhat@forbesmarshall.com SOUTH KOREA Email: shinwoofa@empal.com, forbeskorea@empal.com SRI LANKA Tel: +94 11 2512997/4011127, Fax: + 94 11 4511128, Email: fmlanka@forbesmarshall.com, dsharma@forbesmarshall.com BANGLADESH Tel: +88 028811501/+88 01711529502, Email: bangladesh@forbesmarshall.com NEPAL Mob: +977 9851022039 / 9851036530, Tel: +977 (1)4247676/4238131, Email: ekta@ecomail.com.np KENYA & EAST AFRICA Tel: +254 734 763 913 / +254 725 490 866, Email: africa@forbesmarshall.com ETHIOPIA Email: Biruk.Oasis@gmail.com NIGERIA Email: rjagdale@forbesmarshall.com SOUTH AFRICA Email: naven@pmtsouthafrica.co.za, rrnair@forbesmarshall.com U.A.E & QATAR Mob: :+ (971) 50 4949084, + (971) 55 5222623, Email: csequeira@forbesmarshall.com, sequeira.cedric@gmail.com, ctony@forbesmarshall.com, ops@tsei.ae KINGDOM OF SAUDI ARABIA Email: sjoshi@alzamih.com SULTANATE OF OMAN Email: ibrahim@surtechoman.com TURKEY Email: melis@escon.com.tr EGYPT Mob: +201 68802964, Ph No +202 3036935/52/81, +202 3045637, Fax: + 202 3036897, Email: mchakraborty@forbesmarshall.com UKRAINE Email: v.dorohov@eknis.net

USA Tel: +1 650 327 4227/ +1 650 321 4224, Fax: +1 650 327 4127/ +1 650 321

INTERNATIONAL OFFICES INTERNATIONAL REPRESENTATIVES

AMERICAS

USAForbes Marshall Inc. USA480,California Avenue,Suite 102,P.O. Box 60670Palo Alto CA 94306California,USATel: +1 650 327 4227/ +1 650 321 4224Fax: +1 650 327 4127/ +1 650 321 4454Email: usa@forbesmarshall.net

CANADAForbes Marshall Canada Inc.191 Attwell Dr., Unit #2Etobicoke, ONM9W 5Z2CanadaTel: +416 679 0881Fax: +416 679 0882Email: canada@forbesmarshall.com

COLOMBIAForbes Marshall ColombiaCRA 58 # 167B-19INT: 1 Portales Del Norte, BogotaTel: +57 316 721 1510 +57 316 231 7959Email: fsforbes@gmail.com ngarzon@forbesmarshall.net andresriosf@hotmail.com

SOUTH ASIA

BANGLADESHForbes Marshall Pvt. Ltd.Rupsha Tower, C-3, 3rd Floor7, Kemal Attaturk Avenue,Road#17, Behind Brac Bank,Dhaka - BangladeshTel: +88 028811501 +88 01711529502Email: bangladesh@forbesmarshall.com

SRI LANKAForbes Marshall Lanka Pvt. Ltd.12/5A, 1/1, Robert Gunawardane Mawatha Kirulapone, Colombo-06.Sri Lanka.Tel: +94 11 2512997/4011127Fax: + 94 11 4511128Email: fmlanka@forbesmarshall.com, dsharma@forbesmarshall.com

LATIN AMERICA

COLOMBIAMaster Controls Ltda.Email: rolando@master-controls.com

Casa de La Valvula S.AEmail: comprasint@casaval.net

VENEZUELATermofluidos Email: fnunez@termofluidos.com.ve

BOLIVIAFPL Suministros IndustrialesEmail: importaciones@fpl-suministros.com

SOUTH ASIA

NEPALEkta Engineering and Marketing Pvt. Ltd.Email: ekta@ecomail.com.np

ASIA PACIFIC

MALAYSIAMPC Trading Company & Supply(For Paper Industry) Email: ccchang@tm.net.my hbhat@forbesmarshall.com

Leesonmech Engineering SDN BHD(For Palm Oil related Industries)Email: wendyooi@leesonmech.com

Microcon Engineering (For General Industries) Email: microconeingineering@gmail.com

VIETNAMViet Paper Trading & Service JSC (For Paper Industry)Email: dinhphucvp@gmail.com thailand@forbesmarshall.com

SOUTH KOREAShin Woo F.A Co., Ltd.Email: shinwoofa@empas.com/ forbeskorea@empas.com

SINGAPOREValue Engineered Design Applications Email: vedasingapore@gmail.com hbhat@forbesmarshall.com

ASIA PACIFIC

THAILANDForbes Marshall Pvt. Ltd.Room No.403,4th Floor, House No.567,Seri 6 Road Soi 51, Rama 9 Road,Suan Luan, Bangkok 10250.Thailand.Tel: +66 2 7203483/4 +66-81-9020690Fax: +66 2 7203483,9435500Email: thailand@forbesmarshall.com

INDONESIAForbes Marshall Pvt. Ltd.NC 8/11, Ji Lilin Raya, Kelapa Gading,Jakarta ( Uttara), IndonesiaTel: +62 8 15199 17178 +62 21 4530 773Email: hbhat@forbesmarshall.com

AFRICA

KENYA & EAST AFRICA Forbes Marshall Pvt. Ltd.PO Box - 68005 - 00200 – Nairobi, KenyaTel: +254 734 763 913 +254 725 490 866Email: africa@forbesmarshall.com

MIDDLE EAST ASIA

U.A.E Forbes Marshall Pvt.Ltd. NE-19, P.O. Box 9608, SAIF Zone Sharjah, United Arab Emirates Mob: + (971) 50 4949084 + (971) 55 5222623Email: : csequeira@forbesmarshall.com sequeira.cedric@gmail.com ctony@forbesmarshall.com

EGYPTForbes Marshall Pvt.Ltd. Abou Rawash Industrial Zone,Behind Toyota Kilo 28, CairoAlex Desert RoadTel: +201 0 68802964Email: mchakraborty@forbesmarshall.com

AFRICA

ETHIOPIARapture Import & Export PLCEmail: Biruk.Oasis@gmail.com

SOUTH AFRICAPMT South Africa (Pty) Ltd. Email: naven@pmtsouthafrica.co.za rrnair@forbesmarshall.com

MIDDLE EAST ASIA

U.A.E & QATARTechnical Services Equipment Installation LLC.Email: ops@tsei.ae ctony@forbesmartshall.com

Kingdom of Saudi Arabia Hamad H. Al-Zami’h Trading & Industrial Supplies Est.Email: sjoshi@alzamih.com

Sultanate of OmanSur Technical & Engineering Services Email: ibrahim@surtechoman.com

Swift Connections LLCEmail: pednekarkishore@gmail.com ctony@forbesmartshall.com

EGYPTSystem TechniqueEmail: systeme@link.net mchakraborty@forbesmarshall.com

TURKEYEscon Enerji Sistemleri ve Cihazlari San. Tic. Ltd. Sti Email: melis@escon.com.tr

EASTERN EUROPE

UKRAINE EKNIS Development UkraineEmail: v.dorohov@eknis.net

Your local Forbes Marshall representative would be happy to provide youwith further information and support.

INDIA OFFICE

Forbes Marshall Pvt. Ltd.A-34/35, MIDC, Industrial Estate, ‘H’ Block, Pimpri, Pune - 411 018. India.Tel.: 91(0)20 - 27442020Fax: 91(0)20 - 27442040Email: exp@forbesmarshall.com