Gatorshield Steel Tubing - Waldo & Associates Current Flyers

30

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS

2008 Waldo Grower Supply Catalog (800) 468-4011 prices are subject to change without notice

ROUND STEEL TUBINGCatalog # Size Gauge Bundle Qty. Price/Foot Price/Piece

014-108-288 1” x 24’ 18 127 $1.05 $25.20

014-104-288 1” x 24’ 14 127 $1.47 $35.28

014-104-276 1” x 23’ 14 127 $1.47 $33.81

014-148-195 1.315” x 16’ 3” 18 91 $1.43 $23.24

014-148-288 1.315” x 24’ 18 91 $1.43 $34.32

014-144-171 1.315” x 14’ 3” 14 91 $1.96 $27.93

014-144-187 1.315” x 15’ 7” 14 91 $1.96 $30.55

014-144-243 1.315” x 20’ 3” 14 91 $1.96 $39.69

014-144-279 1.315” x 23’ 3” 14 91 $1.96 $45.57

014-144-288 1.315” x 24’ 14 91 $1.96 $47.04

014-183-288 1.625” x 24’ 13 61 $2.61 $62.64

014-204-234 1.66” x 19’ 6” 14 61 $2.60 $50.70

014-204-288 1.66” x 24’ 14 61 $2.60 $62.40

014-283-156 1.9” x 13’ 13 61 $3.10 $40.30

014-283-288 1.9” x 24’ 13 61 $3.10 $74.40

ROUND SWEDGED STEEL TUBINGCatalog # Size Gauge Bundle Qty. Price/Foot Price/Piece

1” x 23’ 14 127 $1.51 $34.73

1” x 24’ 18 127 $1.10 $26.40

011-600-195 1.315” x 16’ 3” 18 91 $1.48 $24.05

014-544-243 1.315” x 20’ 3” 14 91 $2.01 $40.71

1.66” x 24’ 14 61 $2.65 $63.60

SQUARE STEEL TUBINGCatalog # Size Gauge Bundle Qty. Price/Foot Price/Piece

015-108-240 1” x 20’ 18 160 $1.39 $27.80

015-108-288 1” x 24’ 18 160 $1.39 $33.36

015-204-240 1.25” x 20’ 14 121 $2.49 $49.80

015-204-288 1.25” x 24’ 14 121 $2.49 $59.76

015-306-288 1.5” x 24’ 16 81 $2.47 $59.28

015-402-288 1.75” x 24’ 12 25 $4.59 $110.16

015-505-240 2” x 20’ 15 25 $3.59 $71.80

015-505-288 2” x 24’ 15 25 $3.59 $86.16

RECTANGULAR STEEL TUBINGCatalog # Size Gauge Bundle Qty. Price/Foot Price/Piece

016-106-240 1” X 2” x 20’ 16 96 $2.52 $50.40

016-106-288 1” X 2” x 24’ 16 96 $2.52 $60.48

steel tubing

Gatorshield Steel Tubing

revised 5/07/08

31

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS

prices are subject to change without notice (800) 468-4011 2008 Waldo Grower Supply Catalog

Quick Lock Male InsertFor use with Single & Double Quick LockBase. The Quick Lock Male Insert turnseasily into the Quick Lock Base tohold two layers of greenhouse polycover. Poly is securely locked afterair is inflated between the two poly layers to ‘seat’ the insert. When the time comes to change out poly a quarter turn of the insert is all you need to release it from the base.

AluMinuM eXtRusiOns

Quick Lock Base / Double & Single–recommended for use with double layer inflated poly only.

Quickly and easily attach and replace double layer poly on your greenhouse frame with our rigid locking system. Use Single Quick Lock Base to attach poly to baseboards at the sides and ends of your greenhouse. We recommend ¼” x 1” hex head bolts w/ nuts for attaching Single Quick Lock Base to a steel frame.Our Double Quick Lock Base is designed for use at the top of an Ezy-Grower Roll-up side vent to secure both roof and side wall poly in one base track. The double base is rigid enough to be attached across greenhouse bows (up to 5’ spacing) with out horizontal support. Use #10 x ¾” tek screws to attach to steel framing or ¼” size bolts when attaching to wood.

Both Single and Double Quick Lock Bases are used in conjunction with Quick Lock Male Insert described above.

Wire InsertThe stainless steel wire insert, which is sometimes called a spring, will not change its’ holding characteristics even with repeated use. When installing, simply pull the material across the base channel, and snap the soft wire insert into place to secure the material.

Wire Poly LockUse the steel Wire Poly Lockextrusion to secure poly alongbaseboards and along thecurve of bows. We suggestthat two springs be used foradded strength in windy areas.Wire Poly Lock can be attached to most steel greenhouse frames. Secure with 1/4" x 1" tek screws every 18" when attaching extrusion to steel baseboards or bows. It is recommended to use ¼" hex bolts with nuts when attaching extrusion to Greenhouse Frame.

Universal Spring LockUniversal Spring Lock easily,neatly and inexpensivelyfinishes end walls.It securely attachespoly or shade clothto any round, oblongor square tubing andallows for 8mm polycarbonateor ‘raised rib’ sheets under its cap.

Catalog # Description Price

013-041-048 4' Quick Lock Male Insert $2.48


013-031-096 8' Double Quick Lock Base $18.51



013-021-096 8' Single Quick Lock Base $8.73



Double Quick lock

single Quick lock


013-052-048 4' Stainless Steel Wire Insert $1.28


013-061-072 6' Wire Poly Lock Base $4.65




013-071-072 6' Universal Spring Lock $9.67





32

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS


AluMinuM eXtRusiOns

Large H ProfileUse the 8mm aluminum Large H profile to splice two pieces of polycarbonate together on any flat surface. The Large H profile can be attached to most steel greenhouse frames with 1/4” x 1" tek screws.

Small h ProfileUse the 8mm aluminum Small h profile to attach and seal edges of polycarbonate to a structure. The Small h profile can be attached to most steel greenhouse frames with #10 x 3/4" tek screws.

Aluminum U-ChannelUsed with Bar Base to seal top and bottom edge of polycarbonate sheets.

Bar Base & Bar CapBar Base and Bar Cap are used together to forma two-piece profile similar to the Large H profile.The advantage of having two separate pieces isthat it makes attaching polycarbonate to a curvedsurface much easier. Bar Base can be attachedto most steel greenhouse frames with #10 x 3/4"or 1/4" x 1" tek screws. Use Phillips PanHeadScrews 1/2” long to attach BarCap to the Baseevery 12” to 18”.


013-101-096 8' Large H Aluminum Profile $8.21






013-111-096 8' Small H Aluminum Profile $5.39




013-121-198 16'6" Bar Base Aluminum Profile $15.60



013-131-198 16'6" Bar Cap Aluminum Profile $9.60




013-141-0968' Aluminum U-Channel

$9.58


$14.36


$19.15


$28.72

revised 7/15/08

33

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS


Universal Vent RailUniversal Vent Rail is used at the bottom edge of both side and roof vents to create a water-tight seal. It has been specially designed to be used with Universal Slam Rail. Add Wire Inserts (Springs) only on vents using greenhouse plastic, Wire Inserts are not needed for polycarbonate vents.

E-zy Roll TubeOur aluminum tube is designed witha built-in track to allow for easyinstallation of poly for poly roll-upvents. Simply secure poly in trackwith stainless steel wire (spring)insert. Need to change the poly? Just remove the spring, add a new piece ofpoly and put the old spring back in.

Aluminum LathEconomical answer to attaching poly to round tubing! Aluminum Lath is used on the end bows of a steel greenhouse structure or an inexpensive alternative for attaching poly to roll tube for poly roll-up vents. Use 1/4" x 1" tek screws every 18" to secure.

AluMinuM eXtRusiOns

NEW F-RailUsed in framing bench tops with expanded metal. No more exposed edges on expanded metal benches.

Poly Vent Spring LockUsed at the bottom edge of a poly vent. Uniqueposition of channel allows water to pass over vent seal area. Fits 1-1/4” square steel vent arms.


013-091-193 16'1" Aluminum Lath $8.05


013-321-240 20' NEW F-Rail $20.51

013-321-288 24' NEW F Rail $24.62


012-403-316 E-ZY Roll Tube Splice #RVM316 $2.12

012-403-317 E-ZY Roll Tube Drilled Adapter #RVM317 $3.16

012-403-318 E-ZY Roll Tube Insert #RVM318 $1.58

013-052-048 4' Spring Insert Only $1.28

013-291-144 12' E-ZY Roll Tube $25.98

013-291-288 24' E-ZY Roll Tube $51.96

013-871-14412' E-ZY Roll Tube Kit (Includes Roll Tube, 3 ea. 4’ springs & 1 splice)

$31.40

013-871-28824' E-ZY Roll Tube Kit (Includes Roll Tube, 6 ea. 4’ springs & 1 splice)

$61.22


013-081-096 8' Poly Vent Spring Lock $19.00




013-221-096 8' Universal Vent Rail $20.14



#RVM318

#RVM317

#RVM316

34

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS


Male HingeThe Male Hinge is used withthe Female Hinge tocomplete the movable ‘hinge’on our E-zy Grower Vents. This‘hinge’ that is created when the twoprofiles are joined together is the mechanism that allows the vents to open and close. No additional hardware is needed for assembly due to the self-locking design of the Male Hinge.

AluMinuM eXtRusiOns

Female HingeThe aluminum Female Hingehas been specifically designedfor the E-zy Grower Side Vent.When used with the Male Hinge itcreates a movable profile (hinge) thatallows the vent to swing open or closed. AttachFemale Hinge to steel support with 1/4" x 1"tek screws every 18".

Vent RailThe Vent Rail profile is used with Slam Rail toform a seal on polycarbonate vents. Similar toUniversal Vent Rail, but without the Wire PolyLock Channel.

Need to vent?Our E-zy Grower Roof &

Side Vent Kits make it easy! Check out the details on

pages 17 and 23.

Slam RailThe Slam Rail profile is usedwith Vent Rail to form a sealon polycarbonate vents.Similar to Universal SlamRail, but without the WirePoly Lock Channel.

Universal Slam RailUniversal Slam Rail is usedwith Universal Vent Rail tocreate a water-tight seal.The profile has beencleverly designed to sealboth the vent and thegreenhouse poly, thus cuttingdown on the expense of using two extrusions!Attach Universal Slam Rail to bows or outsidepurlins with bolts every 18".


013-181-096 8' Female Hinge $14.99

013-181-144 12' Female Hinge $22.48

013-181-288 24' Female Hinge $44.95


013-191-096 8' Male Hinge $14.61

013-191-144 12' Male Hinge $21.91

013-191-288 24' Male Hinge $43.82


013-201-096 8' Vent Rail (UPS size) $12.66

013-201-144 12' Vent Rail $18.99

013-201-288 24' Vent Rail $37.98


013-211-096 8' Slam Rail (UPS size) $17.58

013-211-144 12' Slam Rail $26.37

013-211-288 24' Slam Rail $52.73


013-231-096 8' Universal Slam Rail $16.70



35

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS


Hex Head BoltsCommon grade for general purpose fastening. Measure from the underside of head to tip of the bolt.

Carriage BoltsSmooth round head for appearance, security and safety. Measure from underside of head to tip of bolt.

Hex NutsFor general purpose applications. Most commonly used nut. Use lock nuts where vibration my cause loosening.

Wood-tite Screws (hex head)For fastening profiles directly to wood members.

Tek ScrewsSelf drilling screw for fastening to aluminum and steel. Use oo Bar Base Caps.

hARDwARe

WashersUse flat washers for general use. Use fender washers where a large outer diameter is required.

Permaseal WashersUsed to help seal around screwholes on polycarbonate sheets.

Wing Nuts

Catalog # Description Price 100/pk Price

017-111-005 #10 x 1/2" Tek Screw .05¢ ea $5.00

017-111-075 #10 x 3/4" Tek Screw .06¢ ea $6.00

017-112-510 1/4" x 1" Tek Screw .11¢ ea $11.00

017-112-511 1/4" x 1" Tek Screw w/washer .16¢ ea $16.00

017-112-515 1/4" x 1.5" Tek Screw .14¢ ea $14.00

017-112-516 1/4" x 1.5" Tek Screw w/washer .18¢ ea $18.00

017-112-520 1/4" x 2" Tek Screw .16¢ ea $16.00

017-112-521 1/4" x 2" Tek Screw w/washer .20¢ ea $20.00

Catalog # Description 100/pk Price

017-130-915 #9 1/4" x 1-1/2" $10.00


017-302-500 1/4" Flat Washers .03¢ ea $3.00

017-303-800 3/8" Flat Washers .05¢ ea $5.00

017-330-100 1" Fender Washers .05¢ ea $5.00

017-342-515 1/4" x 1-1/2" glvnzd Fender wshr .07¢ ea $7.00

017-365-600 5/16" Lock Washer, zinc .02¢ ea $2.00


017-351-180 Permaseal Washers, 1-1/8" .15¢ ea $15.00

Catalog # Description Price100/pk Price

017-235-600 Wing Nut-5/16"-zinc .32¢ ea $32.00


017-212-500 1/4" Hex Nut .03¢ ea $3.00

017-202-500 1/4" Hex Lock Nut .06¢ ea $6.00

017-213-800 3/8" Hex Nut .04¢ ea $4.00

017-205-600 5/16" Hex Nut .03¢ ea $3.00


017-032-510 1/4" x 1" Carriage Bolt .05¢ ea $5.00

017-032-515 1/4" x 1-1/2" Carriage Bolt .06¢ ea $6.00







017-032-545 1/4"x 4-1/2" Carriage Bolt .20¢ ea $20.00





017-025-625 5-16" x 2-1/2" Carriage Bolt .12¢ ea $12.00







017-012-507 1/4" x 3/4" Hex Head Bolt .07¢ ea $7.00

017-012-510 1/4" x 1" Hex Head Bolt .08¢ ea $8.00

017-002-512 1/4" x 1-1/4" Hex Head Bolt .08¢ ea $8.00

017-012-505 1/4" x 1-1/2" Hex Head Bolt .08¢ ea $8.00

017-012-520 1/4" x 2" Hex Head Bolt .12¢ ea $12.00

017-012-525 1/4" x 2-1/2" Hex Head Bolt .12¢ ea $12.00

017-012-527 1/4" x 2-3/4" Hex Head Bolt .12¢ ea $12.00

017-012-530 1/4" x 3" Hex Head Bolt .13¢ ea $13.00

017-012-535 1/4" x 3-1/2" Hex Head Bolt .14¢ ea $14.00

017-003-815 3/8" x 1-1/2" Hex Head Bolt .06¢ ea $6.00

017-003-820 3/8" x 2" Hex Head Bolt .08¢ ea $8.00

017-013-825 3/8" x 2-1/2" Hex Head Bolt .15¢ ea $15.00

017-013-827 3/8" x 2-3/4" Hex Head Bolt .15¢ ea $15.00

017-003-830 3/8" x 3" Hex Head Bolt .18¢ ea $18.00

017-013-835 3/8" x 3-1/2" Hex Head Bolt .20¢ ea $20.00

017-003-840 3/8" x 4" Hex Head Bolt .22¢ ea $22.00

017-013-845 3/8" x 4-1/2" Hex Head Bolt .25¢ ea $25.00

36

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS


SealantClear silicone sealant sealspolycarbonate sheets, gutters and building joints.

Cotter KeyUsed to attach the wheels to our E-zyGrower Carts and also used on our curved roll-up vents.

U BoltsUsed to attach windbraces (kneebraces) toour E-zy Grower Greenhouses. The 1.315U Bolt is used on our 15', 20', 21' & 24'houses (1.315 tubing). The 2" U Bolt isused on our 30' house (1.66 tubing).

Base PlateUsed for E-ZY Grower Greenhouses that areconstructed on black top/ concrete surfaces.

hARDwARe

Eye BoltsUsed on E-zy Grower Gutter Connect houses, Gothic (curved) Roll-up Vents or anywhere a rope or cable needs to be attached.

Philips Pan Head ScrewsUsed to fasten steel splices and steelcorners on our E-zy Grower Benches.

T.D. Mending Plates

TurnbucklesUsed to tighten cables.

Aircraft CableSteel cable with a load limit of 740 lbs. Vinyl coated cable available by special order only.

Endwall Bracket & Brace Bands

Cable ClipsUsed to fasten two cables together or to make a loop (eye) in the cable.

Catalog # Description Each Price

017-710-000 6" x 6" Base Plate $6.75


017-093-845 3/8" x 4-1/2" Eyebolt $2.70

017-093-860 3/8" x 6" Eyebolt $1.25

Catalog # Description Price100/pk Price

017-171-008 #10 x 3/4" Philips Pan Head Screw .07¢ ea. $7.00

017-171-005 #10 x 1/2" Philips Pan Head Screw .05¢ ea. $5.00

Catalog # DescriptionEach Price

017-081-799 U Bolt Kit, 1-3/4" x 3" x1/4" w/ backplate and 2 nuts $2.15

017-080-299 U Bolt Kit, 2" x 3-1/4" x1/4" w/ backplate and 2 nuts $2.15


017-422-400 2-1/2" Hairpin/Cotter Key .50¢

Catalog # Description Each

017-729-800 Clear Silicone Sealant $7.80

017-729-900 Heat Resistant Silicone Sealant $17.07


017-982-304 4" T.D. Mending Plate .55¢

017-982-308 8" T.D. Mending Plate $1.00

017-982-310 10" T.D. Mending Plate $1.50

4” 8” & 10”


017-403-830 #11 E/E 3/8" x 3" Turnbuckle $2.00


017-433-625 3/16" Non-Vinyl Coated Cable - 250 ft. $50.00


017-453-600 3/16 Cable Clip .48¢


017-801-300 Brace Bands, 1-3/8" HD13010 .50¢

017-801-500 Brace Bands, 1-5/8" HD13020 .50¢

017-800-200 Brace Bands, 2" HD13030 .50¢

017-470-000 Wood End Bracket $2.45

For attaching tubing bows to endwall.Available for wood 2x4 & 1½ square metal tubing. Includes bolt and nut.

revised 7/29/08

37

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS


Vent Arm Adapter

Used to connect vent arms or shaft hangers to a round bow.

Steel Bench CornerUsed to finish off bench top corners on our E-zy Grower Benches.

hARDwARe

PVC ClipsUsed to fasten poly to 1.315 tubing on our E-zy Grower Roll-Up Vents.

No-Tip DeviceUsed on E-zy Grower Rolling Benches to keep the bench top from tipping over when rolled.

SpliceUsed to splice two pieces of frail together on long bench runs.

Roll Up Vent BracketHolds Guide Post to GreenhouseBaseboard and Bow.

Vertical Closure StripPolyurethane strip used to sealpieces of corrugated polycarbonatesheets along straight side. Also seals vents at opening.

Heater Hanging AssemblyAttach the J-bolt to the top of the heater. Attachthe eyebolt and nut to crossbracing between twobows, then hang the heater from the J-bolt. Achain may be used between the J-bolt and theeyebolt to help level and position the heater.


012-403-323 PVC Vent Clips .30¢ ea $29.00


019-000-001 No Tip Device, Small $4.00

019-000-000 No Tip Device, Large $4.00


017-701-040 Steel Bench Corner .70¢


017-980-206 2" x 6" Splice .70¢


012-403-321 Roll Up Vent Bracket - RUM321 $2.00


012-300-638 Vent Arm Adapter, 1-3/8" $1.50

012-300-658 Vent Arm Adapter, 1-5/8" $1.50


029-823-140 Vertical Closure Strip, 3/4"x1"x40" $1.75 ea $165.00


017-075-660 5/16" x 6" J-bolt $1.45

017-095-060 1/2" x 6" Eyebolt $2.00

Lockups

Lockups are designed for connecting purlin and bows and are also excellent for building bench frames, sidewall ventilation vent headers and anywhere there is a need for perpendicular pipe connection. No screws or electrical tools are needed, simply hammer to install by inserting the wedge and tapping. Easy to disassemble if needed. Made of galvanized steel it will not stretch or expand under pressure like aluminum.


017-961-313 1.315” x 1.315” Lockup $1.42/pair

017-961-315 1.315” x 1.66” Lockup $1.67/pair

017-961-319 1.315” x 1.90” Lockup $1.72/pair

38

BU

ILD

ING

MA

TE

RIA

LS

BUILDING MATERIALS


Cross Connectors w/ hardwareUsed to attach purlins. The1-3/8" x 1-3/8" is used for our20', 21', and 24' greenhouses.The 1-5/8" x 1-3/8" is used onour 30' greenhouses.

clAMps & MORe

Bench Clampsw/ hardwareRound or square varieties.

Nut Driver1/4” hex shanks fit powerscrewdrivers and drills. Magnetictype hex head holds screws or nuts securely.

Split TThree way clamp used onends to connect tubing togetherat perpendicular angles.

USE 5/16” x 2”Carriage Bolt & Nut

Brace BandsUsed to attach truss rods, crossbracesto our E-zy Grower Greenhouses.USE 5/16” x 2” Carriage Bolt & Nut

Tension BandsUsed on greenhouse endwalls tofasten 2 pieces of steel together.USE 5/16” x 2” Carriage Bolt & Nut

Line Rail ClampsUsed to connect tubing together atperpindicular angles. Four-way, used as center support.USE 5/16” x 2” Carriage Bolt & Nut

Quarter ClampsUse the 1-3/8" Round quarterclamps to hold purlins to thefirst and last bow. Use the1-1/ 4" Square quarter clamps in endwall construction.USE 1/4” x 1” Tek Screws

Strap ClampsThese clamps are great for fastening tobaseboards without any drilling. Sizes: 1.315”, 1.625”, 1.9”. USE 1/4” x 1” Tek Screws


017-821-300 Quarter Clamps, 1-3/8" Round .75¢

017-821-200 Quarter Clamps, 1-1/4" Square .75¢


017-970-101 Cross Connectors, 1" x 1" 1.90/pr.

017-971-313 Cross Connectors, 1-3/8" x 1-3/8" 1.90/pr.

017-971-513 Cross Connectors, 1-5/8" x 1-3/8" 1.90/pr.


017-950-101 1" Round Aluminum Bench Clamp $1.40/pr.

017-951-313 1-3/8" Round Aluminum Bench Clamp $1.40/pr.

017-951-212 1-1/4" Square Aluminum Bench Clamp $1.40/pr.


017-185-600 5/16" Nut Driver $5.00

017-183-800 3/8" Nut Driver $5.00

017-182-400 1/4" Nut Driver $5.00

Catalog # Description Price/Pair

017-921-313 Split T, 1-3/8" x 1-3/8" HD2711 $2.00

017-921-513 Split T, 1-5/8" x 1-3/8" HD27121 $2.00

017-921-515 Split T, 1-5/8" x 1-5/8" HD27122 $2.00


017-801-300 Brace Bands, 1-3/8" HD13010 .50¢

017-801-500 Brace Bands, 1-5/8" HD13020 .50¢

017-800-200 Brace Bands, 2" HD13030 .50¢


017-811-300 Tension Bands, 1-3/8" HD11010 .40¢

017-811-500 Tension Bands, 1-5/8" .40¢


017-901-313 Line Rail Clamps, 1-3/8" x 1-3/8" $1.10

017-901-515 Line Rail Clamps, 1-5/8" x 1-5/8" $1.65


018-992-110 Strap Clamp 1" w/ 2 holes .45¢

018-992-111 Strap Clamps, 1-1/4" w/ 2 holes .45¢

018-992-112 Strap Clamps 1-1/2" w/ 2 holes .45¢

revised 6/18/08

Date post:	12-Sep-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Gatorshield Steel Tubing - Waldo & Associates Current Flyers

Documents