The GCC LAB is an independent, reliable capable and efficient laboratory to serve the electrical equipment testing requirements for High Voltage, High Power and Low voltage in the GCC & neighboring countries.
COMPANY PROFILE
WHO ARE WE
GCC Laboratory will be a world class Energy Product Testing and Services Hub in the GCC and MENA region. Geared toward becoming an independent authority for testing and certificatation of not only high, medium and low voltage electrical equipment but for the infrastructure of the global power industry as a whole.
Our main goal of acting as a third party for failure investigations and arbitration is to both correct and provide accurate resolutions to incident and fault investigations within the industry.
We provide low voltage calibration services for a wide scope of electrical equipment and testing tools whilst providing certification courses for engineers and technicians alike.
Achieve unique global leadership in the energy industrythrough testing, inspection, certification and innovation.
OUR MISSION
Advanced safety, efficiency and innovation in the GCC energy sector by profitably delivering world-class services and solutions enabled by highly skilled people, efficient workflows and state of the art operating facilities.
OUR VISION
MR. SALAH AL AMRICEO, GCC ELECTRICAL TESTING LABRATORY
The GCC Electrical Testing Lab (GCC Lab) continued on its path to operational success in 2017 to execute the approved Operating Plan of 2017 and expand the business basis to achieve the Long-Term Strategic Objectives.
During 2017, the Company has developed its essential capabilities and focused on the development of its international partnerships to achieve world-class Testing, Inspection & Certifications Services (TIC) and enable significant localisation industry in the power & renewable sectors, and completed the JV partnerships with UL and CESI. Additionally, we have made considerable progress towards operationalising three primary business lines: the GCC Industrial Lab (Industrial & Power), the GCC Renewables Lab (Renewables & Safety), and the GCC Calibration Lab (Calibration & Testing). The company established relationships with Saudi Aramco, SEC, GE, ABB, Saudi Universities, ECRA, SASO, Training Centers, KACARE, KACST, Transco, Oman Transmission and others to build its business share of the GCC Lab at this early stage. Expansion and development continue at a sustainable pace as GCC Lab carries out its business plan and establishes more outreach and transactions. The company was officially registered as a Training Center to provide speciality training in the different fields of safety, testing, quality and Solar PV installations.
A MESSAGE FROM OUR CEO
It has become a member in SASO PV Standards National Committee and SASO Electric Cars Standards Committee; It started its first contracted R&D item with KACARE to build a pilot PV Test Fields in dry and humid areas for monitoring & standards development; and achieved a potential revenue derived from several ongoing contracts and will continue to procure more business.
The company will continue to pursue its long-term service offerings by executing a short-term operational planning strategy, which identifies and accomplishes its short-term strategic priorities: to develop internal capabilities, to build physical and IT infrastructure, to accelerate business growth, and to establish strategic partnerships. It also has set goals across the different vertices to ensure each priority is achieved; and will continue to implement initiatives that will achieve identified strategic priorities and goals. The focus of GCC Lab remains on operationalisation of business lines and expansion of market reach. GCC Lab continues to develop strategies and assess partners for other capabilities, including LV Appliances & Electric Safety TIC, Training & Consulting, and Research & Development. The company anticipates operationalising the GCC Asset Company and GCC Services Company entities in 2018. As individual business lines become operational, they will be responsible for their business planning and for initiating future phases of operations. We continue to rely on the Board’s continued support and engagement as shareholders, as we look forward to 2019 and beyond to attain the brightest future for the GCC Electricity Market.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 02
ÎÜâÊÇ÷]<ÎÇ„⁄J›ã◊.]<ãÈÒÖ
^eÜ„”◊÷<ÌËÅÁ√ä÷]<Ì“Üé÷]
Í€œf÷]<Üë^fi<‡e<‹Èfl∆ã◊•<Áñ¬
Ìœe^�⁄<Ì“Üç
∞ä£]<Ç„ <J›ã◊.]<ãÈÒÖ<gÒ^fi
ÌÈflœi<Ì“Üç
ÎÇ√ä÷]<!]Çf¬<‡e<ÇÈ÷Ê<J›ã◊•<Áñ¬
^eÜ„”◊÷<ÌËÅÁ√ä÷]<Ì“Üé÷]
ã€7]<Ç€¶<‡e<Έ÷<JÅã◊•<Áñ¬
Ç„ <‘◊π]<Ì√⁄^q
ÍéËÜœ÷]<%^â<‡e<!]Çf¬<J›ã◊•<Áñ¬
ÌËÅÁ√ä÷]<Á”⁄]Ö_
Íä◊e^fl÷]<·^�◊âã◊•<Áñ¬
Ì⁄^√÷]<l]Ö^€njâ˜]<—ÊÇflë
‹È√fl÷]<Ç∑_<‡e<àËà√÷]Çf¬<J›ã◊•<Áñ¬
ÌËÅÁ√ä÷]<Á”⁄]Ö_
‹È‚]Üec<Í◊¬<Ç∑_ã◊•<Áñ¬
ŸÊÇ÷<ÍÒ^eÜ„”÷]<ºeÜ÷]<ÌÚÈ‚<ÍrÈ◊§]<·Ê^√j÷]<ã◊•
Í€r√÷]<Ü⁄^¬Ö^flÀ÷]<Ì“Üç
GCC LAB’S BOARD OF DIRECTORS
STAKEHOLDERSThe GCC Lab is an independent company, created by ten key KSA energy sector leaders in the Saudi and GCC markets to be global leaders, providing world-class services to the GCC and MENA regions.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 02
GCC LABINCEPTION
FEASIBILITYSTUDY
FORMATION OFSTAKEHOLDERS
LEGALESTABLISHMENT
OPERATIONALSTARTUP
GCC LAB FACILITIES AT MODON3
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 04
GCC Laboratory will be a world class Energy Product Testing and Services Hub in the GCC and MENA region.
THE PEDIGREE OF GCC LAB
2007 2011 2013 2015 2016
1ST OPERATINGPLAN
2017
GCC LAB INVESTMENT STRUCTURE
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 05
The GCC Lab Company structure has been designed to encompass all activities of the corporate requirement, while the holding company (GCC Assets) will ensure the business development of the subsidiaries, serve as the investment controller and manage the following assets:
A MESSAGE FROM OUR CEO
This structure will play a significant role to fill the gap of TIC services in the GCC region by fulfilling TIC needs and energy associated services.
HOLDING COMPANY (CORPORATE)
GCC LAB HOLDING COMPANY CONSOLIDATES CAPITAL FLOWS FROM FIVE INVESTMENTS
Sales and Marketing of the whole company,
(GIL) gulf industrial laboratory,
(GRL) gulf renewable laboratory,
(GCS) gulf calibration services,
•
•
•
•
GCC LAB FACILITIES AT MODON3
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 06
GCC LAB COLLABORATIONS
COLLABORATIONWITH MINISTRYOF DEFENCE
COLLABORATIONWITH MINISTRYOF ELECTRICITY &WATER-KUWAIT
COLLABORATIONWITH THE GCCCOUNCIL
COLLABORATIONWITH GE
COLLABORATIONWITH THENATIONAL GUARD
COLLABORATIONWITH TRANSCO-UAE
COLLABORATIONWITH ECRA
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 07
•
•
•
•
•
•
•
•
•
Power Equipment Testing (up to HV AC/DC)
Asset Management
Engineering Consultations
Environmental Studies
Renewable Integration Studies
Incident Investigations
Onsite Testing
Specialized Training/Certifications
R&D
•
•
•
•
•
•
•
•
•
•
Renewable Equipment Testing
Resources Assessment Studies
Bankability Studies
Standards Development
Total Solutions for Safety
Smart Meters/Grids/Power Electronics
Efficiency Audits/Studies/Testing
PV Installers Certifications
Fire & Life Safety
Cyber Security
•
•
•
•
•
•
Calibration of All Equipment
Repair of Test Equipment
Oil Analysis
Safety Inspection of Electrical Switching Tools
Inspection of Fuel Stations
Onsite Services
GCC LAB STRATEGIC IMPACT
The GCC Lab Company is a strategic investment that will help the Kingdom in meeting the stated goals of the Vision 2030.
ENHANCELOCALCONTENT
CONTRIBUTETO KSA VISION2030
ENABLELOCALMANUFACTURING
SECURE SUPPLYOF A STRATEGICSERVICE
EMPLOYLOCALWORKFORCE
DRIVE INNOVATIONIN THESAUDI MARKET
LOCALISED CAPABILITIES LOCALISED CAPABILITIES LOCALISED CAPABILITIES
1.
4.
2.
5.
3.
6.
GCC LAB FACILITIES AT MODON3
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 08
LOCALISATION OF STRATEGIC CAPABILITIESIn addition to the JVs, GCC Labs also has additional partnerships to collaborate on specific fields and service offerings alike.
STRATEGIC TECHNICAL PARTNERSHIPS
ELIA GRID INTERN. BELGIUM
APM – S. KOREA
PRYSMIAN - ITALY
INNOGY - GERMANY
TCS-TATA GROUP INDIA
SEA MARCONI- ITALY
RTDS – CANADA
NFPA- USA
System Studies and Power UtilitiesBest Practices, Asset Mgt
Partial DischargeMeasurements & Analysis
Cables Asset Management
Training & Education
Consultations / Digitalization /Efficiency Improvements
Transformers’ Asset Management(Corrosive Sulfur Treatment )
PS Simulation / Dispatching /Research & Development
Safety / Fire Prevention /Fire Inspectors
The GCC Lab, through its services arm, can actively respond to customers’ needs in a variety of engineering & field services.
RTDS TECHNOLOGIESCOUNTRY: CANADACOLLABORATION: SIMULATIONASSOCIATED SERVICES
DOBLE ENGINEERINGCOUNTRY: USACOLLABORATION: TESTING
PRYSMIAM GROUPCOUNTRY: ITALYCOLLABORATION: PARTIAL DISCHARGEMEASUREMENT FOR CABLES
INNOLOGYCOUNTRY: GERMANYCOLLABORATION: TRAINING &EDUCATION
ELI GRID INTERNATIONALCOUNTRY: BELGIUMCOLLABORATION: SYSTEM STUDIES AND POWER UTILITIES BEST PRACTICES INCLUDING POWER ASSETS MANAGEMENT
SAUDI ELECTRIC SERVICESPOLYTECHNICCOUNTRY: SAUDI ARABIACOLLABORATION: TRAINING &EDUCATION
NATIONAL POWER ACADEMYCOUNTRY: SAUDI ARABIACOLLABORATION: TRAINING &EDUCATION
TCS – TATA GROUPCOUNTRY: INDIACOLLABORATION: DIGITALIZATIONCONSOLATIONS
APM TECHNOLOGIES INC.COUNTRY: SOUTH KOREACOLLABORATION: PARTIAL DISCHARGEMEASUREMENT FOR SWITCHGEARS
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 09
SUCCESS FACTORS FOR GROWTH
UNIQUENESS
SYNERGY WITHVISIONS 2030KSA & GCC
INTERNATIONALPARTNERSHIPS
KEYSTAKEHOLDERS
RAMPING UPUTILISATION
MAJOR CLIENTSCONTRACTS
In addition to the JVs, GCC Labs also has additional partnerships to collaborate on specific fields and service offerings alike.
BUSINESS PORTFOLIO
RENEWABLE SMART GRID
TRAININGCONSULTANT
CALIBRATIONAUDITINSPECTION
LOW VOLTAGESAFETY EFFICIENCY
POWER LABSLV-HV, HP
GCC Lab is targeting a diversified portfolio in Electrical Testing, Training, Calibration, Audit, and Appliances Safety Efficiency.
Our game-changing business portfolio was developed to fill the TIC services demand in the region correctly.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 10
TIC1 MARKET DRIVERS IN MENA REGION
GCC LAB COMPANY STRUCTURE
The MENA region is identified as having a drastic shortage of local specialised testing laboratories within the energy sector.
Much of the business was outsourced to other regionsto accommodate the requirement.
GCC Lab is best geared at servicing this shortage within the region, providing a service offering that is reliable, certified and backed by some of the biggest names in the industry.
GULF INDUSTRIAL LAB (GIL)PARTNERSHIPS ESTABLISHED
Laboratory facilities The GCC Laboratory will consist of three distinctive laboratories: High Voltage, high power and low voltage laboratories, in addition to many other necessary laboratories to complete the required tests such as mechanical, chemical, materials testing and calibration and others.
1- High Voltage Laboratory (HV): The HV lab will be equipped with high voltage sources and testing halls of suitable dimensions for testing medium and high voltage electrical equipment with rated voltages up to 420 kV. The HV Lab will offer comprehensive testing facilities for most of the electrical equipment including insulators, transformers, switchgear, cables, & cable accessories. The Lab will be capable of performing the required type, special and routine tests as per relevant local and international standards. The primary testing facilities are:
2-High Power Laboratory (HP): The HP laboratory will be initially equipped with two short-circuit generators, with the future addition of 3rd generator. The Lab will be capable of providing short time current tests for medium and high voltage switchgear, breakers, cables, transformers and others for equipment frequencies of 50 and 60 Hz.The HP Lab facilities will have the following capabilities
3-Low Voltage Lab (LV): The LV laboratory will be capable of performing all required safety, acceptance, efficiency and performance tests for household appliances such as air-conditioning, refrigerators, food freezers, cooking and heating appliances, washing appliances and microwave ovens and other products. The tests will include measurements of voltages, currents, resistance, electrical power, electrical energy, temperatures, distances, thicknesses, masses, forces, dielectric strength, mechanical strength, abnormal operation and flammability of plastic materials. The LV laboratory will have the capability to perform a test of appliances with supply voltages 110-240 Volt, single phase 50 or 60 Hz and 400-460 Volts, three phase 50 or 60 Hz.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 11
TIC1 MARKET DRIVERS IN MENA REGION
Rated Voltage [kV]
Rated Lightning Impulse (BIL) [kVp]
Rated Switching Impulse (SIL) [kVp]
Rated AC etst voltage [kV]
Rated DC test voltage [kV]
Rated current - temperature rise [A]
Rated Power - Temperature rise [MVA]
420
1800
1600
900
700
6300
-
145
750
-
275
-
-
70
TEST SOURCECB, SWITCHGEARS,
CABLESPOWER
TRANSFORMERS
MAXIMUM TEST VALUES
3-phase direct
3-phase synthetic
1-phase synthetic
STC tests (MV/HV)
STC tests (LV)
12
24
36
40.5
245
420
132
-
50
50
40
31.5
50
63
80
150
50
50
31.5
31.5
50
63
80
150
TEST TYPERATED VOLTAGE
[KV]MAXIMUM TEST CURRENT [KA]50HZ 60HZ
MAXIMUM TEST VALUES
A LEADING GLOBAL PROVIDEROFTECHNICAL SERVICES TOTHE POWER INDUSTRY
CESI is an independent centre of expertise and a global provider of high power, high to low voltage testing and technical and engineering services to customers throughout the energy value chain, including business and technical consultancy, engineering and operational support.
CESI acts as an owner’s engineer and provides qualified third-party opinions to power utilities worldwide. CESI’s experience in high power, high to low voltage testing will be available in the Kingdom of Saudi Arabia (KSA) through the Joint Venture (JV) with GCC Lab
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 13
All the tests aresubjected to a strictquality control.
Ensure equipmentfully meets thespecifications.
Modern,environmentalcontrolled laboratory.
Equipment ishandled by a teamof competent staff.
Test carried outby fully trainedTechnicians.
Using latestinternational standardsand procedures.
COMMITMENT
QUALITYASSURANCE
ENVIRONMENT& EQUIPMENT
HANDLING
TESINGSTANDARD &TECHNICIANS
INDUSTRIAL SERVICES BENEFITS
OPTIMIZE QUALITY,TIME & COST
CREATE KNOWLEDGEECONOMY
LOCALIZE MANUFACTURING& SERVICES
CREATE HIGH-SKILLEDJOBS
CREATE APPLIEDR&D
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 12
TYPE TEST
DEVELOPMENT TEST
ROUTINE TEST
TESTING
High Power Synthetic Laboratory
Dielectric Lab (test on HV, MV, LV equipment)
Low Voltage Laboratory
Transformer Short-circuit Test Laboratory
Short Time Current Laboratory
Medium Voltage Laboratory
Environmental & Mechanical Laboratory
Pre-Qualification (PQ) test on High Voltage Cables
Pollution Lab (test on HV, MV insulation)
Type Test and Special Test on MV cables
Renewable testing lab (solar PV module)
TESTING FACILITIES
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
GCC Lab currently performs 3 main types of testing acrossits different testing facilities.
Test for preparation of the inspection before usage of private customer for electricity business.
Verify the performance of the electric equipment through specific routine testing in order to confirm the performance of the manufacturer’s apparatus prior to the sale completion.
•
•
Test to check the quality of apparatus or parts according to the ways and standards which is required from clients.
•
Test to verify whether the performance of the newly designed equipment meets the applied standard or not.
•
INDUSTRIAL TIC
HIGHVOLTAGE
New Equipment– Localized andImported
• Dielectric Type Tests
• Type Test Just Cb
• Type Test GIS Incl Cb
• Auxiliary Cbs And Sf6 Use
• Cable System Type Test
• Prequalification Testing
• Development Testing
• Power Failure Investigation
• Site Commissioning and Testing
• Witnessing of Site Commissioning
• Shunt Reactors Dielectric Type Test
• Failure Investigation
• Witness at Factory (FAT)
• Witness at Site (SAT)
Installed Base • Condition Assessment
• Failure Investigation
• Repair Unit Test
• Routine Tests
LOWVOLTAGE
New Equipment– Localized andImported
• LV Transformers Type Tests• Type Testing Switchgear• Internal Arc Switchgear• Type Testing Control Gear• Internal Arc Control Gear• LV Cable Type Testing
• LV Transformers Type Tests
• Type Testing Switchgear
• Internal Arc Switchgear
• Type Testing Control Gear
• Internal Arc Control Gear
• LV Cable Type Testing
• LV Cable Accessories Type Testing
• Type Test Power Panels - large
• Type Test Power Panels - small and medium
• IP Test - Large Enclosures – industrial
• Special Testing Ex - Large Enclosures - industrial
Installed Base • Condition Assessment
• Failure/ Incident Investigation
MEDIUMVOLTAGE
New Equipment– Localized andImported
• Dielectric Type Test
• Site Commissioning Testing
• Type test Cb (short circuit and dielectric)
• Development Testing
• IP Test and Temp. Rise at elevated temp.
• Internal Arc Test
• Cable Typetest
• Accessories Testing
• Watertree Investigation
• Witness at Factory (FAT)
• Witness at Site (SAT)
• Test after Installation
Installed Base • Conditions Assessment • Failure Investigation
HIGHPOWER
Transformers • HV Short-Circuit Withstand Test • MV Short-Circuit Type Test
Switchgears • HV Type Test Just Cb
• HV Type Test GIS Incl Cb
• MV Type Test Cb
• MV Type Test
A COMPREHENSIVE RANGE OF LAB TESTING AND ON-SITE SERVICES WILL BE DEMANDED IN THE GCC REGION.
LOCATED IN2ND INDUSTRIALAREA RIYADH &1ST INDUSTRIAL
CITY AREA DAMMAM
ACCREDITED TOSAUDI ACCREDITATIONCOMMITTEE (SAC) INACCORDANCE WITH
ISO 17025:2005
OPERATE AS ACALIBRATION,
TESTING REPAIR& CONFORMITY
TESTING LABORATORY.
Wherever possible, the requirements of ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories have been adopted in the calibration services provided by GCS Lab, as demonstrated through an internal audit process.
PROVIDED SERVICES:
Our calibration services provide our customer with quality calibrations using state of the art standards with traceability to recognized International Standards Laboratories. The services including, but NOT limited to the following:
FACILITIES:
The Gulf Calibration Lab provides its calibration services through its labs located across the Kingdom. The labs are equipped with up to date equipment capable of serving a wide variety of the customers’ calibration needs. The Gulf Calibration Lab is also able to access its wide network of partners to accommodate any customers specific needs.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 14
GCC LAB COMPANY STRUCTURE
GULF CALIBRATION SERVICES (GCS)PARTNERSHIPS ESTABLISHEDGULF CALIBRATION SERVICES LAB
The field of electrical, electronics, mechanical and physical measurements is continually changing and expanding. The Gulf Calibration Services (GCS) engineering staff are continually researching new requirements to ensure that we are able to serve our customer’s needs and up to their expectations. Gulf Calibration Lab supports the GCC market in maintaining safe and effective operation by ensuring that all the associated Test, Measurement and Diagnostic Equipment (TMDE) meets its performance specification.
This is achieved by undertaking regular, quality-controlled calibrations against measurement standards which have calibration results that are traceable, through an unbroken chain to the international System of Units – the SI System.
All the laboratories have environmental control which is appropriate to the calibrations undertaken in them.
GCS personnel are fully trained and qualified to undertake the tasks assigned to them.
Written calibration procedures are used which meet the needs of the customer, and which are maintained as controlled documents.
All equipment used is fit for purpose and, where appropriate, has traceable calibration records with measurement uncertainties meeting the requirements of the calibration being performed.
Customers’ items sent to GCS for calibration are properly handled and tracked throughout the time they are at GCS.
Appropriate Quality Assurance checks are made on the results obtained during calibration.
•
•
•
•
•
•
•
•
•
•
•
Perform Calibration Services According to Standards in the Company’s Labs.
Perform Repair Services.
Perform on Site Calibration Services at the Customer Request.
Managing Calibration Across the Company’s Network.
Perform Services in the Field of Inspection, Audits and Safety.
WHAT WE ARE
ESTABLISHED IN2006
ACQUIRED BYGCC LAB IN
2017
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 15
Electrical Mass
Vibration Torque/Force
Humidity Temperature
Dimensional
GulfCalibration
LabScope of
CalibrationServicesPressure
RF & Microwave
Equipment Manufacturing,Metering, Oil & Gas, Construction,Electronics, etc.
Turbines, Generators,Transformers, Oil & GasEquipment, etc.
Military Equipment, RadarSystems, Pressure Gauges,Valves, etc.
Flow, Accelerometer /Vibration, Spectroscopic,RF / Microwave, etc.
Stations, Networks, PortableDevices, SurveillanceSystems, etc.
X-Ray, Patient Monitors,Testers, Pressure Systems,Infusion, etc.
INDUSTRIAL
COMMS & IT
DEFENCE
AVIATION
UTILITIES
MEDICAL
TYPES OF CALIBRATION SERVICESGulf Calibration Lab can perform 9 different types of calibration and also offer on-site services to better serve the customers.
CALIBRATION SERVICES
GCC LAB CALIBRATION SERVICES COVER VARIOUS INDUSTRIES AND GEOGRAPHIES CALIBRATION BUSINESS LINE – SCOPE
CALIBRATION SERVICES INDUSTRIES
IN-SCOPE COUNTRIES (GCC)
UAEKSA
QATARKUWAIT
BAHRAINOMAN
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 16
SCOPE OF INSTRUMENT TESTING
Clamp Meter
Current Shunt
Insulation, Earth Tester
Power Supply
Process, Loop Calibrator
ESD Tester, Meter
Welding Machine
Relay Test Set
High Voltage, Oil Tester
AC/DC Voltage Standards
Decade R,L,C Box
Standard Resistor
Current Injection Test Set
LCR Meter
Oscilloscope
Power & Energy Meter
Electrical Safety Analyzer
Transformer Turn Ratio Meter
MULTIMETERMULTIFUNCTION CALIBRATOR
Function Generator
Power Meter
Power Sensor
Noise Source
Audio Analyzer
Modulation Analyzer
Spectrum Analyzer
Attenuator
Communication Analyzer
Site Master
Optical Power meter Source
Crystal Dictator
SIGNAL GENERATOR FREQUENCY COUNTER
ELECTRICAL INSTRUMENTS RF & MICROWAVE INSTRUMENTS
Pressure Calibrator
Digital Pressure Indicator
Manometer
Pressure, Test Gauge
DEAD WEIGHT TESTER PRESSURE RECORDER
RTD & Thermocouple
Humidity Chamber
Auto Clave, Oven
IR Thermometer
Thermal Mapping
Temperature, Humidity Meter
Temperature Data Logger
Dry Block, Liquid Bath
Temperature Controller
Temperature Transmitter
THERMOMETERS (ALL)TEMPERATURECALIBRATOR
PRESSURE INSTRUMENTS
TEMPERATURE & HUMIDITY INSTRUMENTS
Pressure Transducer
Pressure Transmitter
Pressure Switch
Compound, Vacuum Gauge
Viscosity, Density Meter
Vibration Meter, Analyzer
Sound Level Calibrator
PH, CONDUCTIVITYMETER ANEMOMETER
Micrometer
Depth Gauge
Feeler Gauge
Steel Scale
Thickness Gauge
Measuring Tape
Dial Gauge
Pin Gauge
Angle Measurement
Tools & Dyes
Test Blocks
Plug gauge
GAUGE BLOCK VERNIER CALIPER
OTHER INSTRUMENTS
DIMENSIONAL INSTRUMENTS
Tachometer
Light Meter
Sound Level Calibrator
Industrial Balances
Weighing Platform
ANALYTICAL BALANCES STANDARD WEIGHTS
MASS & VOLUME
Pipettes
Glassware
Torque Transducer, Calibrator
Torque Angle Meter
TORQUE WRENCH,SCREW DRIVER
FORCE GAUGE
TORQUE & FORCE INSTRUMENTS
Push-Pull Gauge
Load Cell
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 17
GCS AS KEYSIGHT ASP
GCS is a Keysight authorized service provider (KSP) in GCC, the first to be awarded this status in region.
This new level of Authorization means that GCS can provide exactly the same repair and calibration services as any Keysight service center.
Ensuring the highest levels of customer satisfaction possible. GCS calibration lab is a commercial calibration lab to provide accredited measurements up to 50 GHz.
1
2
3
The calibration business line was established through a local partnership with Motabaqah
GCC LAB MOTABAQAH JV
Specialized in setting up testing and calibration labs, providing services of testing and analysis for all locally manufactured and imported materials, issuance of conformity certificates, and operation and management of labs.
Headquarters: Riyadh, Saudi ArabiaFounded: 2006Number of employees: 1,600+Number of local labs: 18 labs
Dealing with GCC Lab JV scope: Calibration and repair services
Territory: Saudi Arabia, Bahrain, Kuwait, United Arab Emirates, Qatar, Oman
Motabaqah contribution: Operational know-how, existing customers, international partnerships, synergieswith other lines of business
MOTABAQAH PROFILE DEALING WITH GCC LAB
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 18
GULF RENEWABLE LABORATORYUL JOINT VENTURE WITH GCC LAB
GULF RENEWABLE LAB (GRL)PARTNERSHIPS ESTABLISHED
GCC Lab finalised agreements with JV partners. GCC Lab and Global Safety Science Organization UL will partner for the Gulf Renewables Lab (GRL), leveraging the resources, knowledge and experience of both parties and updating the certification requirements.
The Gulf Renewables Lab (GRL) includes laboratory testing and services segments as well.
The Testing segment includes type testing (cybersecurity, DLMS/COSEM, EMC, safety testing, IEC testing), functional measurement (pre-commissioning, functional, performance, quality assurance), and other specialised tests, such as salt mist and sandblasting.
The Services segment includes GCC Lab offering site services, including site assessment, design review, and energy yield. The company will also offer asset management services, including inspections, condition assessment, failure investigation, and re-calibration.
GCC LAB COMPANY STRUCTURE
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 19
The calibration business line was established through a local partnership with Motabaqah.
GCC LAB UL JV
UL provides expertise to promote safe living and working environments around the world. These distinct UL businesses work closely with industries, authoritiesand customers to keep safety ahead of innovation in an evolving global landscape
Headquarters: Illinois, United StatesFounded: 1894Number of employees: 12000Network: 104 Countries
JV scope: Renewables and Smart Grid testing and associated services
Territory: GCC, Iraq, Yemen, Jordan, Syria, Lebanon, Egypt, and others
UL contribution: Know-how, consulting, advisory services, salesforce in GCC
UL PROFILE CONT. DEALING WITH GCC LAB
PARTNER SELECTIONGULF RENEWABLE LABORATORY (GRL) UL IN RENEWABLE & SMART GRID, UL JOINT VENTURE WITH GCC LAB.
TESTING & CERTIFICATIONOF SOLAR MODULES.
CENTER OF EXCELLENCE FORRENEWABLES & SMART METERS.
EXCLUSIVITY IN BOTH THEMIDDLE EAST AS WELL AS EGYPT.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 20
Fire resistance of walls, floors, doors, dampers, shutters, ducts, columns, roofs, ceilings, penetration seals, windows and glazing, and other elements of construction
Spread of flame tests on building materials and textiles/furnishings
Building envelope / mock up (air, water, structural)
Smoke developed / emitted tests on building materials
Combustibility of materials
Rate of heat release
•
•
•
•
•
•
•
Fire strategy development
Regulatory code compliance
Fire impact and smoke movement analysis
Evacuation assessment, design and modelling
Smoke ventilation design and assessment
Fire risk assessments
Assessment of fire resistance
Materials assessment for flammability
Bushfire impact assessment
Third-party peer review
•
•
•
•
•
•
•
•
•
•
SAFETY TESTING
SAFETY SERVICES
GCC LAB CAPABILITIES
THE SAFETY BUSINESS LINE IS A CONTINUOUS COLLABORATION BETWEEN GCC LAB AND UL, STARTING WITH THE FIRE SECTOR.
SCOPE OF FIRE TESTING LAB
Provides resistance to air, water, heat, light and noise transferComponents of the building envelope can includeExterior wallsFenestration (windows/doors)Roof
The purpose of the building envelope is to:
Support the mechanical load of the buildingControl the flow of energy from internal and externalsourcesPortray a desirable external aesthetic design of the building Mockup Testing
The building envelope is the physical separation between the conditioned and unconditioned environment of a building
•
• • •
• • •
BUILDING ENVELOPEMOCKUP TESTING
OVERVIEWIn addition, building envelope tests are considered as part of the collaboration with UL.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 21
RENEWABLES & SMART GRID TIC SCOPE
SOLAR PV System – NewEquipment
• Site Assessment/ Pre-investment Survey
• Solar Resources Assessment
• Design Review
• Energy Yield Assessment
• Construction Monitoring Services – Part
• Construction Monitoring Services – Full
• Pre-commissioning Tests
• Performance Assessment
• Pre-financing and Acquisition Services – Part
• Pre-financing and Acquisition Services – Full
System – Installed Base • Solar PV Module Inspection (Efficiency/Safety)
• Inverter and Accessories Inspection
• Performance tests / failure assessment
Modules – Localizedand Imported –New Equipment
• IEC Testing
• IEC++ Testing
• Sand Blasting
• Salt Mist
• Accelerated Testing and Analysis
SMART GRID Smart Meter –Local & Imported –New Equipment
• DLMS/ COSEM
• Cybersecurity
• Type Testing
Smart Meter –Installed Base
• Re-Calibration (Metrology)
WIND System NewEquipment
• Site Assessment
• Wind Resource Assessment
• Energy Yield Assessment/ Micrositing
• Design Review
• Wind Farm Performance Assessment
• Pre-financing and Acquisition Services – Part
• Pre-financing and Acquisition Services- Full
Turbine – InstalledBase
• Turbine Failure Investigation
• Turbine Condition Assessment
• Inverter Inspection
• Gearbox Condition Assessment
• Gearbox Failure Investigation
Turbine – Localized andImported – New Equipment
• Type Test
A COMPREHENSIVE RANGE OF RENEWABLES LAB TESTING AND ON-SITE SERVICES WILL BE DEMANDED IN THE GCC REGION.
GCC LABCAPABILITIES
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 22
TESTING AND CALIBRATION SERVICES
Testing (type, routine, development and particular test), inspection and certification of power equipment for voltages up to 420 kV. Calibration and the Repair of Electrical, Mechanical and Thermodynamic Measuring equipment; including onsite services. Oil Lab services including Dissolved Gas Analysis (DGA) and Oil Quality Tests to name but a few. Provide Third-Party Inspection Services, including Quality Assurance and Factory Acceptance Tests.
ENGINEERING SERVICES
Develop and Review material standards and specifications to meet the technical requirements for design, engineering, manufacturing, inspection, testing and performance of indoor & outdoor equipment. Support clients for HVDC interconnections for the bulk transmission of electrical power. Support Clients in each and all parts of projects: Systems Specification & Studies, Vendors’ Qualifications, Tender Technical Specifications & Tender Assistance, Technical and Economic Evaluation of Offers and Design Review. Smart technologies studies (feasibility studies, selection, performance evaluation). Check, Study and Evaluate Buildings and facilities’ energy efficiency.
POWER SYSTEMS STUDIES
Evaluate Power Systems reliability and security for highly critical production plants and recommend improvements for less unplanned shutdowns due to power interruption. Investigation of Power Interruptions or equipment failures that lead to production interruption and give third-party opinions including detailed reports. Analyzing system/assets Performance.
ASSET MANAGEMENT
Power equipment life assessment and equipment operational behaviour studies that lead to performance enhancement and support asset owners with large-scale services, from consulting to solution development. Equipment subject matter experts available upon request for fast and quick consultations. Evaluate the efficiency and the effectiveness of the maintenance and operation management activity, withemphasis on the Asset Management from both perspectives; technically and economically.
SOLAR ENERGY SERVICES
Solar PV Module Testing and Certification (according to IEC, UL and National Standards). Engineering and Consultation Services. On-Site Services.
ENVIRONMENTAL AND SAFETY SERVICES
Provide Environmental Technical Services including Environmental Permitting, Environmental Studies, Environmental Monitoring Plans, Modelling Plants’ Air Quality Systems, etc. Safety and Fire Fighting Services; Testing Products for protection and resistance according to related Standards & Codes; and, Developing electrotechnical Safety and Fire resistance standards & codes.
TRAINING
Provide high-quality educational training and certification expertise as a global provider of technical and engineering services to customers throughout the energy value chain.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 23
Saudi Aramco Calibration Lab Oil and Gas Services Specialised Training
SEC Calibration Consultation Solar PV Certifications Specialised Training
KACAREStandards
DevelopmentField Testing Certifications Specialised Training
KACST Lab Operations Training
GE Asset ManagementResearch andDevelopment
Testing Training
ABBResearch andDevelopment
SASO PV Standards Electric Cars Awareness
ECRA Power Meters Water MetersPV InstallersCertifications
KSA CIVIL DEFENCEQuality Control
SystemsTesting Training
SCESpecialised TrainingCourse Development
Training
TRAINING INSTITUTIONS
Specialised TrainingCourse Development
Certifications
GOVERNMENTINSTITUTIONS
Calibration Pilot Safety Audits Smart Meters Testing
ADVANCEDELECTRONIC CO.
Calibration
GPT Calibration
GDC MIDDLE EAST Calibration
DRAEGER ARABIA Calibration
VINNELL ARABIA Calibration
SABIC Calibration
MINISTRY OFNATIONAL GUARD
Calibration
GCC LAB PROJECT BOOK
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 25
Training Services Training Topics
Courses
TrainingAcademy
Arc FlashSafety
Solar PV
SpecialisedCourses
Calibration
ElectricalTesting
Equipment
Job
GCC LAB TRAINING CENTER
THEORETICAL AND PRACTICAL COURSE TRAINING IMAGES
GCC Lab is starting to offer training to energy institutions and professionals in the Kingdom of Saudi Arabia. Our training solutions incorporate both general and specialised training solutions for both existing and new customers.
PV INSTALLERSCERTIFICATIONSAPRIL 2018
INSTALLTION TRAINING FOR RESIDENTIAL & COMMERCIAL PHOTOVOLTAIC (PV SYSTEMS)
• Test• Vender Training• Qualification• Certification & Recertification
• Task-Based• Incident Investigation• Testing & Repair• R & D• Simulators• Mentoring
• Task-Forces• Self-Divested Group• Conferences• Videos• Lessons• Learning• Guidelines• Manuals• Standards
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 24
In line with the GCC Lab’s strategic objectives of fostering knowledge economy and creating quality jobs, GCC Lab seeks to train a highly skilled and modernised workforce in the electrical, mechanical, chemical and energy sector in the GCC region.
TRAINING SERVICES
GCC TRAINING CENTER
MEANS
• SME Focused• Industrial Topics• Ad-hoc job support
IN HOUSE
2017
TRAININGCENTER
2017
GCCPARTNER
2019
GCCLABS
2020
OBJECTIVES
TYPES
LEVELS
Knowledge Based Competency-Based Work-Based Self-Learning
Knowledge Based Competency-Based Work-Based Self-Learning
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 26
GCC Lab is committed to provide the highest quality services to our clients, maintaining relevancy and accuracy.
This commitment requires that our service development process is highly detailed and participatory, reflecting our work ethic.
LICENCING AND ACCREDITATIONSThe Gulf Calibration Lab has already obtained Certifications & Accreditation to provide credible services to a large client portfolio.
SAUDI MOCILICENCE
GACACCREDITATION
ISO 17025
GACACCREDITATION
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 27
Vice Chairman, Industrial RelationsSaleh Al-Amri
IEEE, KSA
Chairman of Publicity & Industrial RelationsFaisal Al-Yemni
IEEE, KSA
CIGREE, Paris,Large Electrical SystemsMohd Al-Muaili
IEEE, KSA
Hani Balfas
PV Standards
Mohd Al-Ghamdi
Electric Cars
Waleed Al-Faris
National CoordinationCommittee
MEMBERSHIP IN INTERNATIONAL ASSOCIATION
MEMBERSHIP IN SASO
Ali Al-Zahrani
IEEE, KSA
Waleed Al-Faris
IEEE, KSA
MEMBERSHIP IN THE GULF ACCREDITATION CENTRE
CHAIRMANCHAIRMAN
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 28
LICENCING AND ACCREDITATIONS
LICENCING AND ACCREDITATIONS
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 29
LEAVING A POSITIVE IMPACT
The GCC Lab is passionate about reducing the spread of low-quality electrical products in the GCC region through a calculated strategy that relies on providing reliable testing services to manufacturers and raising customer awareness to select suitable products for the right applications.
GCC Lab seeks to train a highly skilled and modernised workforce in the electrical, mechanical, chemical, and energy sector in the GCC Region.
Based in KSA, the GCC Lab will contribute fundamentally to the achievement of the strategic visions of the GCC region in localising manufacturing, building a knowledge-based economy, supporting research & development, enhancing energy efficiency, and promoting Renewable energy alternatives in-line with the climatic conditions of the GCC countries.
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 30
LETTER OF TESTIMONY
GCC ELECTRICAL TESTING LABRATORY - CORPORATE PORTFOLIO
PAGE 31
LETTER OF TESTIMONY
COMPANY PROFILE
CONNECT WITH US
ADDRESS
PO Box 39558 Khobar -Doha 31942 - Saudi Arabia •Third Floor, GCCIA Building
TELEPHONE
Phone: (+996 13) 8689800(+996 54) 4378870Fax: (+996 13) 8689801
ONLINE
Email: [email protected]: www.gccelab.com
SOCIAL
Twitter: @gccelabLinked: gccelabYoutube: gccelab